GRANT GREEN – CVOFFSHORE EMPLOYMENT- RIGGING

SUPERVISOR / DECK FOREMANIdentity Number: 6901275020082Passport number: 459060408 / Expiry Date-2016 M00049079 / Expiry Date-2021

CONTACT INFORMATION

Name: Grant Walter GreenAddress: 363 Manning Road Durban Kwazulu Natal South Africa 4001

Cell Phone: +27832659422Email: grantwgreen@hotmail.com

PERSONAL INFORMATION

Date of Birth: 27 January 1969Place of Birth: Port Shepstone, South AfricaCitizenship: South AfricanVisa Status: Nil

CERTIFICATION AQUIRED

OPITO BOSIET including HUET, Fire Fighting & First Aid, done at Falck Safety Services, Dubai ,UAE.Escape System Training in accordance with OLF Guidelines, done at RGIT, Aberdeen.UK Medical certificate, done at Workmed, Durban, South AfricaOPITO approved Banksman and Slinging Operations, done at Onsite Training Centre, Aberdeen.OPITO approved Rigging and Lifting Operations, done at Onsite Training Centre, Aberdeen.ConocoPhillips level 2 permit to work induction.Working at Heights certificate done at AquaTerra, Aberdeen.Personal Safety & Social Responsibilities with Personal Survival Techniques, done at Unicorn, Durban, South Africa.Yellow Fever.

A SELF-MOTIVATED, ADAPTABLE AND HARD-WORKING INDIVIDUAL With extensive experience in the Oil & Gas industry (offshore), who always strives to achieve a high standard of quality workmanship in every task.

OFFSHORE VESSELS and PLATFORMS

Work included all types of rigging for deployment subsea, experience in use of chianblocks, lever hoists, turfors and all other general rigging equipment. Also included use of small cranes and winches, as well as general maintenance, good house keeping and communications.

RIGGING AND HEAVY LIFTING

Various types of heavy and intermediate lifts such as machinery, implements, engines, gearboxes and housings with the aid of chain blocks, pulleys, slings, shackles and chains. Many heavy lifts of various offshore equipment, rigid and flexible spools.

EXPERIENCE:

POSITION: Deck ForemanLOCATION: Angola, West AfricaINSTALATION : Girassol FPSO, Technip DURATION: 04/2015 - PresentJOB DISCRIPTION: Demobbing of heavy lift winches and CPU’s. General rigging and lifting.

POSITION: Deck ForemanLOCATION: Angola, West AfricaINSTALATION : Topaz Faye, Supply Vessel, TechnipDURATION: 12/2014 – 01/2015JOB DISCRIPTION- Supply and Standby vessel to the Deep Pioneer with regards to Pipe Laying and Subsea construction.

POSITION: Assistant Deck ForemanLOCATION: Nigeria, West AfricaINSTALATION : Normand Pacific, OCV, CEONADURATION: 09/2014 – 11/2014JOB DISCRIPTION- Retrieval and redeployment of umbilicals and flow- lines using VLS and RDS system. Dismantling and reconnecting of midline connections. ROV support.

POSITION: Deck ForemanLOCATION: Equatorial Guinea, West AfricaINSTALATION: Bourbon Peridot, OCV, Amerada Hess.DURATION: 06/2012 – 25/2/14JOB DISCRIPTION: The deployment of Flexible and Ridged Jumpers, Xmas Trees, Mud Mats, Metrology Compats, Hydrate Remediation Skids, Ridged Jumper Chop Saw, PEP Tool, Pipe Pulling Skid and various ROV support and Subsea Rigging.

POSITION: Rigging SupervisorLOCATION: Congo and Gabon, West AfricaINSTALATION: Normand Installer, OCV and various Platforms, SBM.DURATION: 01/2012 – 02/2012JOB DISCRIPTION: High Voltage and Optic Fibre cable laying from Platform to Platform for power and communication purposes. Process was done with the use of The Normand Installer OCV and ROV support.

POSITION: Rigging SupervisorLOCATION: Congo, West AfricaINSTALATION: FDPSO, Azurite, MurphyDURATION: 07/2011 – 09/2011JOB DISCRIPTION: Deployment of MPP pump. ROV support. Removal of ROV equipment and control room by means of air tuggers and skids to bring within range of crane for back loading. All general rigging and lifting procedures.

POSITION: Rigging SupervisorLOCATION: Ghana, West AfricaINSTALATION: Skandi Aker, Construction Vessel, Technip.DURATION: 10/2010 – 01/2011JOB DISCRIPTION: Installation of Subsea Yolks, Tie-backs, ROV support, hose transfers to FPSO for H2S pressure testing and Billy Pugh personnel transfers.

POSITION: Rigging SupervisorLOCATION: Ghana, West AfricaINSTALATION: FPSO, Kwame Nkrumah, Technip DURATION: 07/2010 – 10/2010JOB DISCRIPTION: Installation of 9 Umbilical Risers and 2 Water Injection Risers on Turret System. Heavy lifts involved with use of 980 ton Hydraulic Winch. Tools used – Hydraulic Flange Pullers, Air Hoists, Air Winches and various Air and Hydraulic hand held tools. Flange bolt tensioning with use of Hydratight equipment. Lift Plans, Permit to Work Procedures and Tool Box Talks were all conducted by myself for working parties involved and Engineers.

POSITION: Rigger LOCATION: North Sea, United Kingdom INSTALATION: Oil Rig, Buzzard, Nexen DURATION: 03/2010 – 06/2010JOB DISCRIPTION: Hook-Up of PS Platform. Valve change over’s, Spool replacements and all general Rigging and Lifting. Materials Handler.

POSITION: RiggerLOCATION: North Sea, United Kingdom INSTALATION: Oil Rig, Beryl Alpha, ExxonMobilDURATION: 11/2009 – 02/2010JOB DISCRIPTION: Destruct and Construct of Derrick Support Beams, Walkways, Spools and Pipe support brackets. Construction of Flare Stack Walkways, replacement of Spool Clamps and Support Beams.

POSITION: Rigger LOCATION: North Sea, United KingdomINSTALATION: Gas Platform, Viking Bravo, ConocoPhillipsDURATION: 05/2009 – 09/2009JOB DISCRIPTION: Riser Installation and Riser Protection Frame to Subsea. Banksman for Riser Installation. Destruct of decommissioned Spools and Valves. Pre rigging of Riser Clamps for Divers. Lowering of Clamps to Divers with assistance of Air Winch and transfer onto Dive Support Vessel crane for further lowering to Subsea. Reverse effect of lifting of old Clamps from Subsea to Platform lay down area. Platform Shut Down, replacement of various Spools ranging from 20 inch to 60 inch. Work Leader and Permit Holder on the above mentioned tasks.

POSITION: Rigger LOCATION: North Sea, United KingdomINSTALATION: FPSO, Anasuria, ShellDURATION: 04/2009- 05/2009JOB DISCRIPTION: Heavy lifts consisting of diesel purification pumps, diesel engine fire pump overall (CAT 3412 engine) and Air Compressor Motors.

POSITION: RiggerLOCATION: North Sea, United KingdomINSTALATION: Gas Platform, Loggs, ConocoPhillipsDURATION: 02/2009 – 03/2009JOB DISCRIPTION: Installation of Gas Riser to sea level. Replacement of gas meter valves.

POSITION: RiggerLOCATION: North Sea, United KingdomINSTALATION: Oil Rig, Gannet Alpha, ShellDURATION: 12/2008 – 01/2009JOB DISCRIPTION: Destruct of deluge system. Use of air tools, impact wrench, sengar saws, spitznar saws and hammer drills. Heavy lifts a very confined spaces.

POSITION: RiggerLOCATION: North Sea, United KingdomINSTALATION: Oil Rig, Ninian Central, Canadian Natural ResourcesDURATION: 10/2008 – 11/2008JOB DISCRIPTION: Replacement of safety valves, general rigging and lifting. Placement of certain hot and cold equipment for further tasks.

POSITION: Rigger LOCATION: North Sea, United KingdomINSTALATION: Oil Rig, Gannet Alpha, ShellDURATION: 08/2008 – 09/2008JOB DISCRIPTION: Shut Down, replacement of release valves, constant springs, constant loadsupports, spools (piping), pipe work supports and the destruct and construct of spools.