Granite City Tool 2010

http://www.granitecitytool.com

http://www.granitecitytool.com/showitem.cfm?itemnum=2183





http://www.granitecitytool.com/showitem.cfm?itemnum=1883&catnum=29&pcatnum=100&mcatnum=92




mailto:[email protected]


http://www.granitecitytool.com/fabrication.cfm?mcatnum=92&keyword1=fabrication

http://www.granitecitytool.com/monument.cfm?mcatnum=93&keyword1=monument

http://www.concretecountertopspecialties.com/


www.granitecitytool.comPhone: 800-328-7094 • Fax: 866-522-1817

Fabrication Catalog2010 Version 1

HOT PRODUCTS ....................................................CNC Tooling ...........................................................Solution Machine ...................................................Stone Saws ............................................................Water Filtration ...................................................... Sink Machines........................................................ Portable Routers / Edging Machines ...................Edge Tooling .......................................................... Portable Saws ........................................................ Grinders, Polishers & Drills ..................................Blades .....................................................................Adaptors & Attachments .....................................Core Bits.................................................................Polishing Pads / Buffing .......................................Silicon Carbide ......................................................Machine Tooling ....................................................Adhesives & Epoxies ............................................Stone Care & Repair ..............................................Sink Tools & Templates ........................................Lifting & Handling ..................................................Necessities & Safety ............................................

56

202226353639515260717478889196

104111116129

Etching & Sculpting .............................................Flooring .................................................................Air Compressors ..................................................GCT Fabrication Training Seminar Dates ...........Concrete Counters ...............................................Construction .........................................................Lease Application .................................................Credit Application .................................................

136141142145146147150152

Pg. 60

Pg. 79

Pg. 96

Pg. 26

Pg. 20


http://ebbcowaterfiltration.com/

II

INDEX

Aardwolf Lifters ........................................................................ 127Adapters, (Water Jackets, Core Bits) .................................. 71-73Adapters, Flush-Mount (For Blades) ............................................ 70Adapters, Router: (Ghines, Galeski, X-TREME, Flex, Etc) .......... 71Adapters, Snail-Lock .................................................................... 85Adhesives: (RIVAL, Touchstone, Tenax, Akemi, Bonstone, Bellinzoni, 3M, Conap) ................................... 96-103A-Frame, Groves ........................................................................ 123Air Compressor, Accessories............................................... 142-144Air Compressors: (Palatek, Champion, Etc) .......................... 141Alpha Blades (Katana, Knock-Out, Numbero-Uno, Trim Master, Plus, Quad, Libero, Contour) ...................................... 66, 67, 69, 70Alpha Pads (Ceramica EX, Resin, Metal, TwisTouch, Vitrified) ............................................................. 81, 82Alpha Quick Change PVA ............................................................. 90Alpha Summit Wheels for Automatic Edging Machines................ 95Alpha, Saws & Polishers ................................................... 51, 56-58Anchor Bits, T-31 (Blue Diamond) ...............................................111Angle Grinders: (Makita, Flex, Alpha, Metabo, GCT) ......... 52-58APEXX Router Bits, Portable ....................................................... 43Aprons (GCT, Alpha, & Fabricator) ............................................. 129Backer Heads: (Velcro Type-Hook & Loop, Snail-Lock) ... 84, 85Black Beauty, GCT (Stone Color) ......................................... 87, 106Blade S-Segment (Q4 Aurora Series) .......................................... 62Blades, Diamond: (RIVAL, Q4, Blue Diamond, Diamax, Diamond Vantage, Alpha) ................................... 60-70Blast Control Valve ..................................................................... 143Blue Diamond Products .............................. 15, 18, 19, 43, 44, 48, 49, 61, 62, 72, 77, 111, 136Boom, Forklift ............................................................................. 125Boots, Steel Toe, Yellow Rain ..................................................... 130Breaker Wheel, Diamond Q4........................................................ 43Bridge Crane Kits, Spanco, Free Standing, Jib, Gantry ............. 128Bridge Saws (Mega, 300, 200 ECO) ...................................... 22, 23Buffing: (Felt, Aluminum caps, Tin Oxide, Diamond Powder, Marble Powder, Bars, Tint Powder, Etc) .......................... 86, 87Bundle Racks, Groves ................................................................ 123Carry Clamps .............................................................................. 120Carts & Work Tables (GCT, Groves, Dia-Pro) ..................... 122-124Chain: (Hoist, Hooks, Slings)...................................................... 128Clamps, Quick Jaw ......................................................................119CNC High Life H1 (MEMUSA) ...................................................... 10CNC High Life H2 (MEMUSA) .......................................................11CNC High Life H3 (MEMUSA) ................................................ 12, 13CNC High Life H4 (MEMUSA) ................................................ 14, 15CNC Super High Speed Bits (MEMUSA) ................................. 7-9CNC: Blades, Finger Bits........................................................ 17, 18CNC: Cones/Tool Holders .......................................................... 16CNC: Core Bits, Diamond............................................................. 19CNC: Drum Wheels, Diamond...................................................... 15Cocoa Mat Buffer .......................................................................... 86Colors for Epoxies (Rival, Touchstone, Akemi) ........... 96, 97, 99ConcreteCountertop Specialties Ad............................................ 146Construction Ad .......................................................................... 147Contour Blades: (Diamax, Q4, Alpha) ....................................... 69Convex, Diamond Polishing Pads ................................................ 82Core Bit Adapters & Extensions ................................................... 71Core Bit Dry Alpha ........................................................................ 76Core Bits, CNC, Diamond............................................................. 19Core Bits, Diamond: (Q4, Diamax, Diteq, MEMUSA, Alpha, Blue Diamond) ................................................................................. 74-77Core Drill, Machines ................................................................... 59Crayons, Wax ............................................................................. 131

Cup Wheels, Diamond: (Q4, Diamax, Alpha) ..................... 47, 48De-Icer, Tanner ........................................................................... 143Diamax Blades (Storm, Hurricane, Cyclone) ........................... 63Diamond Blades: (RIVAL, Q4, Blue Diamond, Diamax, Diamond Vantage, Alpha) ................................... 60-70Diamond Disc Triatic Tri-Loc....................................................... 139Diamond Disc, Vacuum Brazed .................................................... 48Diamond Pads, Floor Machines (Nato, Spiral, Metal, V-Harr) .... 141Diamond Polishing, Radial Arm (Q4, Toro, Tenax, Alpha, Abrasive Tech) ............................................ 91-95Diamond Sheets ........................................................................... 85Diamond, Contour Blades: (Diamax, Q4, Alpha) .......................... 69Diamond, Drum Wheels ........................................................ 48-50Diamond, Files............................................................................ 139Diamond, GCT Etching Pens ..................................................... 139Diamond, Polishing Discs: (DX-PRO, MEMUSA, Eagle, RIVAL, Cyclone, Desert-Rain, Alpha, Con-Dri, Blue Diamond, Q4, CopperHead, 3M) ................ 78-85Diamond, Router Bits, Portable (MEMUSA, Blue Diamond, APPEX) ...................................................... 39-45Diamond, Turbo-Tips, (For Ultimate Speedy Bit) .......................... 35Die Grinder, Diamond Profiles (Blue Diamond) .......................... 137Die Grinders, Electric & Pneumatic (Pencil, Makita, Dremel) ..... 136Diskit, Backer Pads ...................................................................... 84Dollies, Slab (Omni-Cubed, Dia-Pro, Groves) .....................117, 125Double Sided Shop Cart, Stone Carts .................................117, 123Dowels, Aluminum & Stainless Steel ...........................................112Drain-Board System, Diamond, Abrasive Tech ............................ 95Drill Stand ..................................................................................... 59Drum Wheels, CNC, Diamond...................................................... 15Drum Wheels, Diamond ........................................................ 48-50Dry Polishing Pads ....................................................................... 80DS-301 Planetary Polisher ......................................................... 58Dust Control................................................................................ 135DX-PRO Polishing Pads ............................................................. 78Ear Muffs, 3M ............................................................................. 134Ear Plugs, Moldex ...................................................................... 134Ebbco Water Filtration ............................................................ 26-31Ebbco Waterjet Filtration ......................................................... 32-34Edger Machines: (Flex, Galeski, X-TREME, STONE PRO, MEMUSA) ..................................................... 36-38Electric, Hoist, Harrington ........................................................... 128Electroplated Blades, Diamond (Marble) (Diamax, Alpha) ..... 67, 68Epoxies: (RIVAL, Touchstone, Tenax, Akemi, Bonstone, Bellinzoni, 3M, Conap) ...................... 96-103Etching Tools & Supplies: (Dremel, Ideal, Die Grinders, ElectroStylus, Makita, Pens, Blue Diamond, Jet Stick, Flame Finishing Tool) ..................................................... 136-140EZ Dishwasher Bracket ...............................................................114Fab King ....................................................................................... 35Fab Stands ......................................................................... 124, 126Fab-Saw Jr................................................................................... 25Felt Buffer pads ............................................................................ 86Files, Diamond............................................................................ 138Filter/Regulator/Lubricator .......................................................... 142Finger Bits, CNC, Diamond .......................................................... 18Flex Tools: ( Edging Machines, Polishers, Core Drill) ........................................ 36, 53-55, 57, 59Floor Machines, Polishers (Lavina) ........................................ 141Floor Polishing Pads................................................................... 141Flush-Mount Adapters (For Blades).............................................. 70Foam Head, Floor Machines ...................................................... 140Free Standing, A-Frame ..................................................... 123, 124


III

INDEX

Galeski Products: (Contour Cat, Drum Wheels) ................ 36, 50Gantry Crane, Spanco ................................................................ 128Garnet........................................................................................... 34GCT S-9 Pneumatic Water Polisher ............................................. 57GCT, Fabrication Training Seminars ....................................... 145Gloves, (HD Application) ............................................................ 130Gloves: (Work & Rubber) ........................................................... 130Glue Spreaders .......................................................................... 132Glue Stirring Sticks ..................................................................... 132Graffiti Gone A & B ..................................................................... 106Granite City Stone Clean ............................................................ 108Granite Grabbers .........................................................................114Grinder Gear (Water Protectors) ................................................ 130Grinding Discs, Silicon Carbide ............................................... 88-90Grinding Wheels, Diamond: (Q4, Alpha, Diamax) .............. 47-48Ground Fault Interrupter ............................................................... 73Guide Rails ................................................................................... 51Hammer Drills (Makita, Metabo) ................................................... 59Handpads, Diamond ..................................................................... 85Hoist, Chain ................................................................................ 128Hook & Loop Backer Pads (Velcro Type) ................................. 84Horizontal Seam Setter ...............................................................118Hose attachments, Water (For Grinders & Saws) ........................ 72Hose Reels ................................................................................. 144Hose, Sandblast & Suction ......................................................... 144Jet Stik, Flame Tool .................................................................... 140Joint Clean-up Bit, Diamond ......................................................... 44K-4 & K-6 Undermount Kits .........................................................113Lifters (Anver, Aardwolf, Slab, Vacuum) ................. 121, 126-128Lifting, Setting & Handling Equipment ............................ 116-128M8 Master Line, SETS, MEMUSA ........................................... 40-42Machine Polishing, Diamond (Q4, Tenax, Alpha, Abrasive Tech) .................................................................... 91-95Makita Products ........................................................ 51, 52, 53, 59Manta Saws ............................................................................ 22-24Manta, Ultra Light Aluminum Saws .......................................... 24Marble Blades, Diamond ......................................................... 67-69Marble Refinisher Kit .................................................................. 106Markers, (Paint & China) ............................................................ 131Measuring Cups ......................................................................... 103MEMUSA CNC Tools ................................................................ 6-15Metabo (WE14-125 Grinder)....................................................... 56Milling Wheel, Diamond ................................................................ 62Monumentall Lifter ...................................................................... 127MP-7 Rust Remover ................................................................... 107Necessities ......................................................................... 129-135Nitrile Gloves .............................................................................. 130Nu-Stone2 (Stone Cleaner) ........................................................ 108Omni Cubed Products .......................................................116, 117Omni Cubed, Lam-Clamp™ ........................................................116Omni Cubed, Pro-Cart AT1 ..........................................................117Omni Cubed, Seam Setter VC2 ..................................................117Omni Cubed, Sink Hole Saver™ .................................................116Oscillating Drums ......................................................................... 50Oxalic Acid .................................................................................. 108Palatek ,Air Compressors ........................................................... 142Patch Sticks (7”) ......................................................................... 108Patriot Rebel, Radial Arm Machine ........................................... 35Pearl, Blade Roller, (For Skil Worm Drive) ................................... 73Perfect Form, Portable Routers, MEMUSA .................................. 39Planetary Polisher, DS-301 .......................................................... 58Plastic Template Sheets ..............................................................115Pneumatic Polishers ..................................................................... 57

Polishers: (GCT, Metabo, Flex, Alpha, Makita, Intertool) ... 52-58Polishing Bars............................................................................... 87Polishing Bricks CNC, Frankfurt, Diamond MEMUSA .................. 21Polishing Cones.......................................................................... 139Polishing Discs for Auto-Edging Machines ........................ 91-95Polishing Machine: Denver Solution ........................................ 20Polishing Pads for Floor Machines ............................................. 141Polishing Pads, Diamond: (DX-PRO, MEMUSA, Eagle, RIVAL, Cyclone, Desert-Rain, Alpha, Con-Dri, Blue Diamond, Q4, CopperHead, 3M) ............................... 78-85Polishing Powder (Marble, Tin-Oxide, Diamond, Tint ) ................. 87Polishing Systems for Radial Arm (Slabmaster, Summit, Q4, Alpha, Tenax) .......................... 91-95Polishing Wheel Alpha Summit..................................................... 95Polishing Wheel Alpha Twincur .................................................... 94Polyester Resin: (Rival, Touchstone, Tenax, Akemi, Bellinzoni, Conap) ............................................... 96-103Porcelain Blades, Diamond .................................................... 66, 68Profile Grinding Wheels, Silicone Carbide.................................... 90Profiler Bits, Diamond (Q4, Alpha)................................................ 46Pumice Bricks ............................................................................. 107PVA Wheels, Alpha ....................................................................... 90Q4 Core Bits ................................................................................. 74Q4 EHS Turbo Blades ................................................................. 64Q4 Tuck Point Rodding Blade ...................................................... 70Q4, Snail Lock Adapters ............................................................... 85Quick Jaw Clamp.........................................................................119Racks: (A-Frame, Bundle, Work Tables & Carts) ........... 123, 124Radial Arm, Diamond Polishing (Slabmaster, Summit, Q4, Alpha, Tenax) .......................... 91-95Rail Saws, (Fab Saw Jr., Teq-Track, Fas Track) ....................... 25Rain Suit ..................................................................................... 129Razor Blades .......................................................................110, 131Respirators ................................................................................. 134RIVAL Adhesives ........................................................................ 96RIVAL Blades .............................................................................. 60RIVAL Continuous Rim Blades ................................................. 68RIVAL (Impregnator, Sealer, Cleaner, Polish) ................ 104, 105RIVAL Polishing Pads ................................................................ 79RIVAL Silicone Sealant ............................................................ 103RIVAL Stone Polish .................................................................. 105Rockbitter ..................................................................................... 37Router Adapters (Ghines, Galeski, X-TREME, Flex, Etc)............. 71Router Bits, Brazed Diamond (For Waterfeed Polishers) ....... 44, 45Router Bits, CNC, Diamond (MEMUSA) ................................. 6-15Router Bits, Portable, Diamond (MEMUSA) For: X-TREME, Sector, Stinger, & Galeski ........................ 39-42Routers, Stone (Flex, Galeski Contour Cat, X-TREME, XTREME JR., MASTER) ................................... 36-38Rubber Backer Pads (Velcro Type-Hook & Loop) ................... 84Rubber Hammer, Mallet.............................................................. 133Rubbing Bricks, Silicon Carbide ................................................... 88Rust Poultice .............................................................................. 106Rust Remover, MP-7 .................................................................. 107Safety Equipment ..................................................................... 134Safety Glasses ........................................................................... 134Samurai Diamond Blades .......................................................... 65Sandblast Hose .......................................................................... 144Sanding Discs, Silicon Carbide (Spirakut, Dia-Pro, Hermes, Alpha) ................................... 88-90Saws: Portable (Alpha, Makita, Skil) ......................................... 51Saws: Slab, Table, Rail (Manta, Fab-Saw Jr., Diteq) ........... 22-25Sealer, Stone (RIVAL) ............................................................... 104


IV

INDEX

Seam Setters & Suction Cups .....................................117, 118, 120Seminar, GCT Fabrication Training......................................... 145Setting Cushions ........................................................................ 132Setting, Lifting & Handling Equipment ............................ 116-128Shaping Wheels, Diamond Cup (Q4, Alpha) ................................ 47Shims.......................................................................................... 132Shop Carts & Work Tables .................................................. 122-124Silent Core Blades, Diamond ................................................. 61, 62Silent Core, Milling Wheel, Diamond ............................................ 62Silicon Carbide: (Sanding Discs, Wheels, Bricks) ............. 88-90Sink Cut-Out Machines .............................................................. 35Sink Hole Saver, Omni Cubed .....................................................116Sink Kit, Undermount...........................................................112, 113Sink Templates ..........................................................................115Slab Dollies................................................................................. 125Slab Lifters.................................................................................. 121Slab Production Rack & Bundle Rack ................................ 123, 124Slasher, Diamond Blade, Silent core, Blue Diamond ................... 61Soapstone .................................................................................. 131Solution Machine .......................................................................... 20Spanco, Gantry & Bridge Crane .............................................. 128Speedy-Cut, Bit for Radial Arm..................................................... 35Squeegee ................................................................................... 133Steel Wool .................................................................................. 133Stone Care & Repair .......................................................... 104-110Stone Clean, Granite City ........................................................... 108Stone Polish (RIVAL, Akemi, Bellinzoni) ................ 105, 107, 108Stone Pro Carry Clamps............................................................. 120Stone Pro Cross Carry Strap ...................................................... 120Stone Pro Cup Support System ..................................................118Stone Sealers, RIVAL ......................................................... 104, 105Suction Cups & Seam Setters .....................................117, 118, 120Suction Hose .............................................................................. 144Super High Speed: CNC Tooling .............................................. 7-9Super Seam Setter, Suction Cups ...............................................118T-31 Anchor Bits ..........................................................................111T-31 Machine, The Original .........................................................111Table, Work, Racks & Carts .............................................. 122-125Tanner, De-Icer ........................................................................... 143Tape Measure, GCT ................................................................... 131Template Sheets, Plastic .............................................................115Templates, Sink Plastic................................................................115Tenax Products ....................................................... 91, 93, 100, 106Thin Wall, Core Bits, Diamond ..................................................... 74Tile Blades, Diamond ............................................................. 66, 68Tin Oxide (Polishing Powder) ....................................................... 87Tool Holders: CNC ........................................................................ 16Touchstone Edge System Epoxy .................................................. 97Touchstone Epoxies ............................................................... 97, 98Touchstone Epoxy Pour Spout ................................................... 103Touchstone Express II .................................................................. 98Touchstone Penetrating Epoxy ..................................................... 98Training Seminars, GCT Fabrication .......................................... 145Transport Dolly & Slab Trolley .................................................... 125Transport Rack & Work Tables ........................................... 123, 124Travertine Filler Epoxy Liter Buff ................................................ 100Travertine Spackle, RIVAL ............................................................ 96Tuck-Point Blades, Diamond ........................................................ 70Turbo, Blades, Diamond .......................................................... 63-67Turbo, Grinding Wheels, Diamond ......................................... 47, 48Turbo-Tips (For Speedy-Cut) ..................................................... 35Turnbuckle Seam Joiner ..............................................................118Undermount Sink Holder Tool ......................................................113

Undermount Sink Kit............................................................112, 113Vacuum Brazed, Diamond Disc .................................................... 48Vacuum Lifters (Anver) ............................................................ 121Van-Air Aftercoolers .................................................................... 142Van-Air Filters ............................................................................. 143Velcro Type, Backer Heads ........................................................ 84Vertical Back Splash Setter .........................................................118Vertical Slab Lifter....................................................................... 127Water Hose attachments, (For Grinders & Saws) ........................ 72Water Protectors (For Grinders) ................................................. 130Water Swivel, Adapter, Core Bit ................................................... 71Water Swivels, Blue Diamond ...................................................... 72Waterfeed Polishers ................................................. 52, 54, 56, 57Wax Crayons .............................................................................. 131Wax Paste, Tenax (TeWax) ........................................................ 100Wobble Wedges ......................................................................... 132Work Tables, (Tables, Racks & Shop Carts) ........................ 122-124Zenesis Blades ........................................................................... 61Zero Tolerance Wheels, Diamond ............................................. 49Zip-Wall System ......................................................................... 135

Pg. 64


5

HOT PrODucTs!

Pg. 96Pg. 60

Pg. 60

Pg. 60

Pg. 68

Pg. 104


CN

C Tooling

6

6

cNc TOOlINg

The complete range of our CNC tools.All our tools are completely developed and tested working alongside the leading CNC machine manufacturers. Our research and development department makes tests on all our machines in order to grant the highest quality of our tools. Using our tools you can reach the highest productivity levels with your CNC machine.


http://www.granitecitytool.com/docs/MarmoSectionsGCT.pdf

http://www.granitecitytool.com/docs/MemUSAGCT/ProfileWheels%20LineSHS%20DEC.pdf

http://www.granitecitytool.com/docs/MemUSAGCT/ProfileWheels%20Line60.pdf



http://www.granitecitytool.com/docs/MarmoSectionsGCT.pdf

CN

C T

oolin

g

7

7

cNc TOOlINg

POS. Item # Price0-0 0801-1737 $335.000 0801-1738 $580.001 0801-1739 $530.002 0801-1740 $530.003 0801-1741 $425.004 0801-1742 $145.005 0801-1743 $145.006 0801-1744 $145.00

POS. Item # Price0 0801-1035 $480.001 0801-1036 $565.002 0801-1037 $565.003 0801-1038 $475.004 0801-1039 $155.005 0801-1040 $155.00

5F 0801-1134 $185.006 0801-1041 $155.00

POS. Item # Price0 0801-0994 $480.001 0801-0995 $565.002 0801-0996 $565.003 0801-0997 $475.004 0801-0998 $155.005 0801-0999 $155.00

5F 0801-1134 $185.006 0801-1001 $155.00

POS. Item # Price0 0801-1745 $480.001 0801-1746 $480.002 0801-1747 $480.003 0801-1748 $340.004 0801-1749 $122.005 0801-1750 $122.00

5F 0801-1134 $185.006 0801-1751 $122.00

A20 r10 A30 r3 A30 r6

A30 r8 A30 r15 A40 r20

B20 B30 r25 B+B30

POS. Item # Price0-0 0801-1118 $370.000 0801-1119 $640.001 0801-1120 $635.002 0801-1121 $635.003 0801-1122 $475.004 0801-1123 $155.005 0801-1124 $155.006 0801-1125 $155.00

POS. Item # Price0-0 0801-1752 $410.000 0801-1107 $710.001 0801-1108 $735.002 0801-1109 $735.003 0801-1110 $600.004 0801-1111 $195.005 0801-1112 $195.006 0801-1113 $195.00

POS. Item # Price0-0 0801-1753 $350.000 0801-1754 $570.001 0801-1755 $585.002 0801-1756 $585.003 0801-1757 $480.004 0801-1758 $155.005 0801-1759 $155.006 0801-1760 $155.00

POS. Item # Price0-0 0801-1126 $400.000 0801-1127 $650.001 0801-1128 $645.002 0801-1129 $645.003 0801-1130 $550.004 0801-1131 $175.005 0801-1132 $175.006 0801-1133 $175.00

Z30 Z40 ZS30/40

POS. Item # Price0-0 0801-1171 $400.000 0801-1172 $565.001 0801-1173 $755.002 0801-1174 $755.003 0801-1765 $670.004 0801-1766 $205.005 0801-1767 $205.006 0801-1768 $205.00

POS. Item # Price0 0801-0992 $565.001 0801-0993 $565.002 0801-1078 $565.003 0801-1079 $420.004 0801-1080 $175.005 0801-1081 $175.00

5F 0801-1134 $185.006 0801-1082 $175.00

POS. Item # Price0 0801-1135 $600.001 0801-1136 $645.002 0801-1137 $645.003 0801-1138 $490.004 0801-1139 $185.005 0801-1140 $185.00

5F 0801-1000 $215.006 0801-1141 $185.00

POS. Item # Price0 0801-1042 $645.001 0801-1043 $685.002 0801-1044 $685.003 0801-1045 $630.004 0801-1046 $195.005 0801-1047 $195.00

5F 0801-1134 $185.006 0801-1048 $195.00

The innovative SHS line (Super High Speed) for a faster working which doubles your CNC machine’s productivity. From a fast grinding to a brilliant polishing thanks to Marmoelettromeccanica patented technologies as Frangistone and Long-life. Thanks to Z axis alignment of the complete wheel set, to the measures indicated on each wheel and to our working parameters, your CNC machine set up will be easier.

sHs


CN

C Tooling

8

8

cNc TOOlINgsHs

VB40 H20 H30

O30 OG30 FZ30

FZ40 T30 r8 V20

POS. Item # Price0-0 0801-1769 $430.000 0801-1770 $645.001 0801-1771 $745.002 0801-1772 $745.003 0801-1773 $570.004 0801-1774 $205.005 0801-1775 $205.006 0801-1776 $205.00

POS. Item # Price0-0 0801-1777 $350.000 0801-1778 $670.001 0801-1779 $620.002 0801-1780 $620.003 0801-1781 $540.004 0801-1782 $175.005 0801-1783 $175.006 0801-1784 $175.00

POS. Item # Price0-0 0801-1049 $400.000 0801-1050 $735.001 0801-1051 $735.002 0801-1052 $735.003 0801-1053 $590.004 0801-1054 $200.005 0801-1055 $200.006 0801-1056 $200.00

POS. Item # Price0-0 0801-1785 $420.000 0801-1786 $900.001 0801-1787 $950.002 0801-1788 $950.003 0801-1789 $700.004 0801-1790 $230.005 0801-1791 $230.006 0801-1792 $230.00

POS. Item # Price0-0 0801-1793 $350.000 0801-1794 $785.001 0801-1795 $615.002 0801-1796 $615.003 0801-1797 $500.004 0801-1798 $190.005 0801-1799 $190.006 0801-1800 $190.00

POS. Item # Price0-0 0801-1010 $400.000 0801-1011 $850.001 0801-1012 $685.002 0801-1013 $685.003 0801-1801 $540.004 0801-1802 $200.005 0801-1803 $200.006 0801-1804 $200.00

POS. Item # Price0-0 0801-1805 $400.000 0801-1806 $890.001 0801-1807 $755.002 0801-1808 $755.003 0801-1809 $670.004 0801-1810 $200.005 0801-1811 $200.006 0801-1812 $200.00

POS. Item # Price0-0 0801-1027 $390.000 0801-1028 $820.001 0801-1029 $800.002 0801-1030 $800.003 0801-1031 $600.004 0801-1032 $200.005 0801-1033 $200.006 0801-1034 $200.00

POS. Item # Price0-0 0801-1019 $370.000 0801-1020 $900.001 0801-1021 $710.002 0801-1022 $710.003 0801-1023 $650.004 0801-1024 $200.005 0801-1025 $200.006 0801-1026 $200.00

POS. Item # Price0-0 0801-1142 $400.000 0801-1143 $980.001 0801-1144 $740.002 0801-1145 $740.003 0801-1146 $670.004 0801-1147 $215.005 0801-1148 $215.006 0801-1149 $215.00

POS. Item # Price0 0801-1150 $815.001 0801-1151 $710.002 0801-1152 $710.003 0801-1153 $520.004 0801-1154 $175.005 0801-1155 $175.00

5F 0801-1134 $185.006 0801-1156 $175.00

POS. Item # Price0-0 0801-1813 $350.000 0801-1814 $690.001 0801-1815 $610.002 0801-1816 $610.003 0801-1817 $490.004 0801-1818 $155.005 0801-1819 $155.006 0801-1820 $155.00

E40 F20 F30


CN

C T

oolin

g

9

9

cNc TOOlINg

V30 V40

V Grooving20

V Grooving30 T20 r3

T30 r3 T30 r5 T40 r3

AR201.5x1.5

AR302x2

AR403x3

POS. Item # Price0-0 0801-1002 $360.000 0801-1003 $700.001 0801-1004 $700.002 0801-1005 $700.003 0801-1006 $510.004 0801-1007 $175.005 0801-1008 $175.006 0801-1009 $175.00

POS. Item # Price0-0 0801-1821 $400.000 0801-1822 $840.001 0801-1823 $840.002 0801-1824 $840.003 0801-1825 $630.004 0801-1826 $190.005 0801-1827 $190.006 0801-1828 $190.00

POS. Item # Price0-0 0801-1829 $340.000 0801-1830 $715.001 0801-1831 $485.00

0-0 0801-1832 $340.000 0801-1833 $715.001 0801-1834 $485.00

1 0801-1835 $440.001 0801-1836 $440.00

POS. Item # Price0-0 0801-1837 $390.000 0801-1838 $780.001 0801-1839 $520.00

0-0 0801-1840 $390.000 0801-1841 $780.001 0801-1842 $520.00

1 0801-1843 $470.001 0801-1844 $470.00

POS. Item # Price0 0801-1845 $630.001 0801-1846 $660.002 0801-1847 $660.003 0801-1848 $440.004 0801-1849 $155.005 0801-1850 $155.00

5F 0801-1134 $185.006 0801-1851 $155.00

POS. Item # Price0 0801-1157 $670.001 0801-1158 $670.002 0801-1159 $670.003 0801-1160 $490.004 0801-1161 $175.005 0801-1162 $175.00

5F 0801-1134 $185.006 0801-1163 $175.00

POS. Item # Price0 0801-1852 $670.001 0801-1853 $670.002 0801-1854 $670.003 0801-1855 $490.004 0801-1856 $175.005 0801-1857 $175.00

5F 0801-1134 $185.006 0801-1858 $175.00

POS. Item # Price0 0801-1859 $780.001 0801-1860 $840.002 0801-1861 $840.003 0801-1862 $640.004 0801-1863 $191.005 0801-1864 $195.00

5F 0801-1134 $185.006 0801-1865 $190.00

POS. Item # Price0 0801-1866 $575.001 0801-1867 $555.002 0801-1868 $555.003 0801-1869 $440.004 0801-1870 $155.005 0801-1871 $155.00

5F 0801-1134 $185.006 0801-1872 $155.00

POS. Item # Price0 0801-1164 $630.001 0801-1165 $630.002 0801-1166 $630.003 0801-1167 $500.004 0801-1168 $175.005 0801-1169 $175.00

5F 0801-1134 $185.006 0801-1170 $175.00

POS. Item # Price0 0801-1190 $680.001 0801-1191 $715.002 0801-1192 $715.003 0801-1193 $520.004 0801-1194 $190.005 0801-1195 $190.00

5F 0801-1134 $185.006 0801-1196 $190.00

sHs

FV30 POS. Item # Price0-0 0801-2567 $390.000 0801-2568 $740.001 0801-2569 $740.002 0801-2570 $740.003 0801-2571 $650.004 0801-2572 $210.005 0801-2573 $210.006 0801-2574 $210.00


CN

C Tooling

10

10

cNc TOOlINgHIgH life

1A180x35

1A180x45 A30 r15

POS. Item # Price4 0801-2119 $358.005 0801-2120 $183.006 0801-2121 $183.007 0801-2122 $183.00

POS. Item # Price4 0801-2123 $455.005 0801-2124 $192.006 0801-2125 $192.007 0801-2126 $192.00

POS. Item # Price4 0801-1097 $389.005 0801-1098 $159.006 0801-1099 $159.007 0801-1100 $159.00

POS. Item # Price4 0801-2127 $497.005 0801-2128 $200.006 0801-2129 $200.007 0801-2130 $200.00

POS. Item # Price4 0801-2131 $397.005 0801-2132 $176.006 0801-2133 $176.007 0801-2134 $176.00

A40 r20 AR303x3 B30

F+V30 F+Z30 FS30

T30 r3 T30 r10 V30

ZR30 r5 ZS40

POS. Item # Price4 0801-2135 $442.005 0801-2136 $179.006 0801-2137 $179.007 0801-2138 $179.00

POS. Item # Price4 0801-2139 $585.005 0801-2140 $229.006 0801-2141 $229.007 0801-2142 $229.00

POS. Item # Price4 0801-2147 $546.005 0801-2148 $209.006 0801-2149 $209.007 0801-2150 $209.00

POS. Item # Price4 0801-2143 $546.005 0801-2144 $209.006 0801-2145 $209.007 0801-2146 $209.00

POS. Item # Price4 0801-2151 $397.005 0801-2152 $176.006 0801-2153 $176.007 0801-2154 $176.00

POS. Item # Price4 0801-2163 $389.005 0801-2164 $159.006 0801-2165 $159.007 0801-2166 $159.00

POS. Item # Price4 0801-2155 $397.005 0801-2156 $176.006 0801-2157 $176.007 0801-2158 $176.00

POS. Item # Price4 0801-2159 $397.005 0801-2160 $176.006 0801-2161 $176.007 0801-2162 $176.00

POS. Item # Price4 0801-2167 $585.005 0801-2168 $173.006 0801-2169 $173.007 0801-2170 $173.00

High-Life is the line of profile wheels properly made to work after other manufacturers’ diamond wheels. High-Life wheel set is composed of a metallic wheel Bi-Power and 3 polishing rubber wheels with Long-Life technology.The metallic wheel Bi-Power never loses its shape and rectifies the profile already shaped by the diamond profiling wheels. Thanks to this rectification step, the polishing wheels will last more and allow to reach a perfect final polish.The 3 rubber polishing wheels, made with Long-Life technology, have high quality diamond printed on an elastic core. This unique technology allows you to reach an exceptional polish with unbeatable results on marble, granite and engineered stones.Only using the High-Life wheels after your diamond wheels, you will achieve unreachable results never before seen such as perfectly polished profiles without lines or waves.

Compatible with ADI®

All original equipment, manufacturer names, and part numbers are used for identification purposes only. Our products are replacement parts for the original equipment parts. Granite City Tool is not affiliated with ADI®,, Nicolai®, Diamut®, or Tyrolit®.


CN

C T

oolin

g

11

11

cNc TOOlINg

E30 F20 F30

G30 H20 H30

O30 Q30 T20 r3

T30 r3 T40 r3 TP30

TRAP20 TRAP30 TRAP40

POS. Item # Price4 0801-2199 $494.005 0801-2200 $179.006 0801-2201 $179.007 0801-2202 $179.00

POS. Item # Price4 0801-2195 $377.005 0801-2196 $159.006 0801-2197 $159.007 0801-2198 $159.00

POS. Item # Price4 0801-2203 $546.005 0801-2204 $209.006 0801-2205 $209.007 0801-2206 $209.00

POS. Item # Price4 0801-2207 $546.005 0801-2208 $209.006 0801-2209 $209.007 0801-2210 $209.00

POS. Item # Price4 0801-2211 $416.005 0801-2212 $190.006 0801-2213 $190.007 0801-2214 $190.00

POS. Item # Price4 0801-2219 $559.005 0801-2220 $209.006 0801-2221 $209.007 0801-2222 $209.00

POS. Item # Price4 0801-2223 $559.005 0801-2224 $209.006 0801-2225 $209.007 0801-2226 $209.00

POS. Item # Price4 0801-2215 $468.005 0801-2216 $209.006 0801-2217 $209.007 0801-2218 $209.00

POS. Item # Price4 0801-2227 $389.005 0801-2228 $160.006 0801-2229 $160.007 0801-2230 $160.00

POS. Item # Price4 0801-2231 $397.005 0801-2232 $176.006 0801-2233 $176.007 0801-2234 $176.00

POS. Item # Price4 0801-2235 $504.005 0801-2236 $194.006 0801-2237 $194.007 0801-2238 $194.00

POS. Item # Price4 0801-2239 $546.005 0801-2240 $209.006 0801-2241 $209.007 0801-2242 $209.00

POS. Item # Price4 0801-2243 $337.005 0801-2244 $165.006 0801-2245 $165.007 0801-2246 $165.00

POS. Item # Price4 0801-2247 $337.005 0801-2248 $165.006 0801-2249 $165.007 0801-2250 $165.00

POS. Item # Price4 0801-2251 $585.005 0801-2252 $173.006 0801-2253 $173.007 0801-2254 $173.00

A20 r10 A30 r15 A40 r20POS. Item # Price

4 0801-2171 $339.005 0801-2172 $146.006 0801-2173 $146.007 0801-2174 $146.00

POS. Item # Price4 0801-2175 $389.005 0801-2176 $159.006 0801-2177 $159.007 0801-2178 $159.00

POS. Item # Price4 0801-2179 $497.005 0801-2180 $200.006 0801-2181 $200.007 0801-2182 $200.00

B20 B30 D30POS. Item # Price

4 0801-2183 $377.005 0801-2184 $160.006 0801-2185 $160.007 0801-2186 $160.00

POS. Item # Price4 0801-2187 $442.005 0801-2188 $179.006 0801-2189 $179.007 0801-2190 $179.00

POS. Item # Price4 0801-2191 $553.005 0801-2192 $209.006 0801-2193 $209.007 0801-2194 $209.00

HIgH life

Compatible with Diamut®



CN

C Tooling

12

12


4-30(2.5x2.5)

4-40(2.5x2.5) A20 r10

POS. Item # Price5 0801-2279 $397.006 0801-2280 $176.007 0801-2281 $176.008 0801-2282 $176.00

POS. Item # Price5 0801-2283 $437.006 0801-2284 $194.007 0801-2285 $194.008 0801-2286 $194.00

POS. Item # Price5 0801-2287 $339.006 0801-2288 $146.007 0801-2289 $146.008 0801-2290 $146.00

A30 r3 A30 r5 A30 r6

A30 r10 A30 r15 A30 r20

A40 r20 B20 B30

D30 E20 E30

POS. Item # Price5 0801-2291 $389.006 0801-2292 $159.007 0801-2293 $159.008 0801-2294 $159.00

POS. Item # Price5 0801-2295 $389.006 0801-1101 $159.007 0801-1102 $159.008 0801-1103 $159.00

POS. Item # Price5 0801-2296 $389.006 0801-2297 $159.007 0801-2298 $159.008 0801-2299 $159.00

POS. Item # Price5 0801-2300 $389.006 0801-2301 $159.007 0801-2302 $159.008 0801-2303 $159.00

POS. Item # Price5 0801-2308 $389.006 0801-2309 $159.007 0801-2310 $159.008 0801-2311 $159.00

POS. Item # Price5 0801-2304 $389.006 0801-2305 $159.007 0801-2306 $159.008 0801-2307 $159.00

POS. Item # Price5 0801-2312 $497.006 0801-2313 $200.007 0801-2314 $200.008 0801-2315 $200.00

POS. Item # Price5 0801-2316 $377.006 0801-2317 $160.007 0801-2318 $160.008 0801-2319 $160.00

POS. Item # Price5 0801-2320 $442.006 0801-2321 $179.007 0801-2322 $179.008 0801-2323 $179.00

POS. Item # Price5 0801-2324 $553.006 0801-2325 $209.007 0801-2326 $209.008 0801-2327 $209.00

POS. Item # Price5 0801-2328 $339.006 0801-2329 $146.007 0801-2330 $146.008 0801-2331 $146.00

POS. Item # Price5 0801-2332 $377.006 0801-2333 $159.007 0801-2334 $159.008 0801-2335 $159.00

V20 V30 V40POS. Item # Price

4 0801-2255 $377.005 0801-2256 $155.006 0801-2257 $155.007 0801-2258 $155.00

POS. Item # Price4 0801-2259 $397.005 0801-2260 $176.006 0801-2261 $176.007 0801-2262 $176.00

POS. Item # Price4 0801-2263 $504.005 0801-2264 $194.006 0801-2265 $194.007 0801-2266 $194.00

POS. Item # Price4 0801-2267 $358.005 0801-2268 $183.006 0801-2269 $183.007 0801-2270 $183.00

POS. Item # Price4 0801-2271 $455.005 0801-2272 $192.006 0801-2273 $192.007 0801-2274 $192.00

Z30 Z50

CONTINUED

Compatible with Nicolai®



CONTINUED

CN

C T

oolin

g

13

13

cNc TOOlINg

T40 r2 T40 r5 V20

V30 V40 V+F30

ZH35 ZH45 ZH55

ZS30(12x12)

ZS40(10x10)

T20 r3 T30 r3 T30 r5POS. Item # Price

5 0801-2360 $389.006 0801-2361 $155.007 0801-2362 $155.008 0801-2363 $155.00

POS. Item # Price5 0801-2364 $397.006 0801-2365 $176.007 0801-2366 $176.008 0801-2367 $176.00

POS. Item # Price5 0801-2368 $397.006 0801-2369 $176.007 0801-2370 $176.008 0801-2371 $176.00

POS. Item # Price5 0801-2372 $504.006 0801-2373 $194.007 0801-2374 $194.008 0801-2375 $194.00

POS. Item # Price5 0801-2376 $504.006 0801-2377 $194.007 0801-2378 $194.008 0801-2379 $194.00

POS. Item # Price5 0801-2380 $377.006 0801-2381 $155.007 0801-2382 $155.008 0801-2383 $155.00

POS. Item # Price5 0801-2384 $397.006 0801-2385 $176.007 0801-2386 $176.008 0801-2387 $176.00

POS. Item # Price5 0801-2388 $504.006 0801-2389 $194.007 0801-2390 $194.008 0801-2391 $194.00

POS. Item # Price5 0801-2392 $585.006 0801-2393 $229.007 0801-2394 $229.008 0801-2395 $229.00

POS. Item # Price5 0801-2396 $358.006 0801-2397 $183.007 0801-2398 $183.008 0801-2399 $183.00

POS. Item # Price5 0801-2400 $455.006 0801-2401 $192.007 0801-2402 $192.008 0801-2403 $192.00

POS. Item # Price5 0801-2411 $494.006 0801-2412 $208.007 0801-2413 $208.008 0801-2414 $208.00

POS. Item # Price5 0801-2415 $337.006 0801-2416 $165.007 0801-2417 $165.008 0801-2418 $165.00

POS. Item # Price5 0801-2419 $585.006 0801-2420 $173.007 0801-2421 $173.008 0801-2422 $173.00

E40 F20 F20+10

F20+20 F30 OG30

POS. Item # Price5 0801-2336 $546.006 0801-2337 $200.007 0801-2338 $200.008 0801-2339 $200.00

POS. Item # Price5 0801-2340 $494.006 0801-2341 $179.007 0801-2342 $179.008 0801-2343 $179.00

POS. Item # Price5 0801-2344 $546.006 0801-2345 $209.007 0801-2346 $209.008 0801-2347 $209.00

POS. Item # Price5 0801-2348 $637.006 0801-2349 $230.007 0801-2350 $230.008 0801-2351 $230.00

POS. Item # Price5 0801-2352 $546.006 0801-2353 $209.007 0801-2354 $209.008 0801-2355 $209.00

POS. Item # Price5 0801-2356 $550.006 0801-2357 $209.007 0801-2358 $209.008 0801-2359 $209.00

HIgH life



CN

C Tooling

14

14


B20 B30 r25 B30 r3

ES40 F20 F30

FGS40 FS30 FS30 r3

OG20 OG30 T20 r3


3 0801-2404 $389.004 0801-1197 $159.005 0801-1198 $159.006 0801-1199 $159.00

POS. Item # Price3 0801-2432 $389.004 0801-2433 $159.005 0801-2434 $159.006 0801-2435 $159.00

POS. Item # Price3 0801-2436 $497.004 0801-2437 $200.005 0801-2438 $200.006 0801-2439 $200.00

POS. Item # Price3 0801-2440 $377.004 0801-2441 $160.005 0801-2442 $160.006 0801-2443 $160.00

POS. Item # Price3 0801-2444 $520.004 0801-2445 $179.005 0801-2446 $179.006 0801-2447 $179.00

POS. Item # Price3 0801-2448 $562.004 0801-2449 $192.005 0801-2450 $192.006 0801-2451 $192.00

POS. Item # Price3 0801-1283 $585.004 0801-1284 $173.005 0801-1285 $173.006 0801-1286 $173.00

POS. Item # Price3 0801-2452 $494.004 0801-2453 $179.005 0801-2454 $179.006 0801-2455 $179.00

POS. Item # Price3 0801-2456 $546.004 0801-2457 $209.005 0801-2458 $209.006 0801-2459 $209.00

POS. Item # Price3 0801-2460 $715.004 0801-2461 $230.005 0801-2462 $230.006 0801-2463 $230.00

POS. Item # Price3 0801-1114 $546.004 0801-1115 $209.005 0801-1116 $209.006 0801-1117 $209.00

POS. Item # Price3 0801-2464 $683.004 0801-2465 $224.005 0801-2466 $224.006 0801-2467 $224.00

POS. Item # Price3 0801-2468 $497.004 0801-1215 $179.005 0801-1216 $179.006 0801-1217 $179.00

POS. Item # Price3 0801-2469 $546.004 0801-1212 $209.005 0801-1213 $209.006 0801-1214 $209.00

POS. Item # Price3 0801-2470 $389.004 0801-2471 $155.005 0801-2472 $155.006 0801-2473 $155.00


3 0801-2423 $339.004 0801-2424 $146.005 0801-2425 $146.006 0801-2426 $146.00

POS. Item # Price3 0801-2427 $389.004 0801-1180 $159.005 0801-1181 $159.006 0801-1182 $159.00

POS. Item # Price3 0801-2428 $389.004 0801-2429 $159.005 0801-2430 $159.006 0801-2431 $159.00


3 0801-2474 $389.004 0801-2475 $155.005 0801-2476 $155.006 0801-2477 $155.00

POS. Item # Price3 0801-2405 $397.004 0801-1200 $176.005 0801-1201 $176.006 0801-1202 $176.00

POS. Item # Price3 0801-2478 $397.004 0801-2479 $176.005 0801-2480 $176.006 0801-2481 $176.00

Compatible with Tyrolit®



Blue Diamond - Electroplated Wheels1/2 gas thread and center waterfeed

Brazed Sink Wheel - CNC - 1/2 gas thread andcenter waterfeed

1/2 Gas Drum Wheel for CNC or radial arm machine. Guaranteed to outlast brazed diamond wheels. Send them in for re-plating and save money.

ELEC

TRO

PLAT

ED

Re-Plate and Save Money!

30/40 Diamonds 30/40 Re-Plate

Description Item # Price Item # Price2” dia x 2” lg 1919-0116 $250.00 99-131-0261 $175.003” dia x 2” lg 1919-0117 $300.00 99-131-0262 $192.00

50/60 Diamonds 50/60 Re-Plate

Description Item # Price Item # Price2” dia x 2” lg 1919-0118 $225.00 99-131-0265 $142.003” dia x 2” lg 1919-0119 $233.00 99-131-0266 $158.00

Size Grit Item # Price1” x 2” #50 1919-0049 $83.501” x 2” #100 1919-0069 $83.501” x 2” #200 1919-0070 $83.502” x 2” #50 1919-0050 $91.002” x 2” #100 1919-0084 $91.002” x 2” #200 1919-0085 $91.00

CN

C T

oolin

g

15

15

cNc TOOlINg

V40 V60 X20

X30 Z30 Z50

T40 r8 TP30 V30POS. Item # Price

3 0801-2491 $504.004 0801-2492 $194.005 0801-2493 $194.006 0801-2494 $194.00

POS. Item # Price3 0801-2495 $546.004 0801-1206 $209.005 0801-1207 $209.006 0801-1208 $209.00

POS. Item # Price3 0801-2406 $397.004 0801-1104 $176.005 0801-1105 $176.006 0801-1106 $176.00

POS. Item # Price3 0801-2496 $504.004 0801-2497 $194.005 0801-2498 $194.006 0801-2499 $194.00

POS. Item # Price3 0801-2500 $728.004 0801-2501 $278.005 0801-2502 $278.006 0801-2503 $278.00

POS. Item # Price3 0801-2504 $389.004 0801-2505 $155.005 0801-2506 $155.006 0801-2507 $155.00

POS. Item # Price3 0801-2508 $397.004 0801-2509 $176.005 0801-2510 $176.006 0801-2511 $176.00

POS. Item # Price3 0801-2512 $358.004 0801-2513 $183.005 0801-2514 $183.006 0801-2515 $183.00

POS. Item # Price3 0801-2407 $403.004 0801-1209 $190.005 0801-1210 $190.006 0801-1211 $190.00


3 0801-2482 $397.004 0801-1203 $176.005 0801-1204 $176.006 0801-1205 $176.00

POS. Item # Price3 0801-2483 $397.004 0801-2484 $176.005 0801-2485 $176.006 0801-2486 $176.00

POS. Item # Price3 0801-2487 $437.004 0801-2488 $194.005 0801-2489 $194.006 0801-2490 $194.00

CONTINUED

HIgH life



Made of 4150 pre-hardend alloy steel.

Surface hardness will withstand the 72 hour salt spray corrosion test under ASTM B117 conditions, reducing flaking and galling.

Tapered ground: superior accuracy and no vibration. 0806

-016

6

0806

-020

9

0806

-016

9

0806

-017

0

0806

-016

3

0806

-016

2

0806-0208

CN

C Tooling

16

16

cNc TOOlINgcONEs

Check out our many types of CNC Tool Holders.

Grinding wheel holders1/2 Gas ConnectionCNC Machine Tool Holders

Call for sizes and more information.

RIVAL CNC Machine Tool Holders

Retention Knobs

Description Conn. Item # PriceBavelloni 35X39 0806-0059 $202.30Bavelloni 1/2” GAS 0806-0060 $202.30Brembana 5X39 0806-0061 $202.30Brembana 1/2” GAS 0806-0062 $202.30

Northwood/Intermac 35X34 0806-0063 $202.30Northwood/Intermac 1/2” GAS 0806-0064 $202.30

PARK 35X39 0806-0065 $202.30PARK 1/2” GAS 0806-0066 $202.30Loffler 35X32.5 0806-0069 $202.30Loffler 1/2” GAS 0806-0070 $202.30

Description Conn. Item # PriceBavelloni 22x39 0806-0217 $233.00 Bavelloni 35x39 0806-0204 $192.00 Bavelloni 1/2 GAS 0806-0216 $167.00 Brembana OLD Style 35x39 0806-0167 $192.00 Brembana OLD Style 1/2 GAS 0806-0168 $167.00 Brembana NEW Style 35x39 0806-0169 $192.00 Brembana NEW Style 1/2 GAS 0806-0170 $167.00 Intermac 35x39 0806-0209 $192.00 Intermac 1/2 GAS 0806-0215 $167.00 Loffler 35x39 0806-0220 $233.00 Loffler 1/2 GAS 0806-0221 $167.00 Northwood Gen. I 35x34 0806-0222 $225.00 Northwood Gen. I 35x47 0806-0223 $225.00 Northwood Gen. I 1/2 GAS 0806-0224 $167.00 Northwood Gen. II 35x34 0806-0225 $225.00 Northwood Gen. II 35x47 0806-0226 $225.00 Northwood Gen. II 1/2 GAS 0806-0227 $167.00 Northwood Gen. III 35x34 0806-0165 $225.00 Northwood Gen. III 35x47 0806-0164 $225.00 Northwood Gen. III 1/2 GAS 0806-0166 $167.00 Park 35x39 0806-0163 $217.00 Park 1/2 GAS 0806-0162 $167.00

Bavelloni 0806-0206 $30.00 Brembana 0806-0206 $30.00 Intermac 0806-0228 $34.00 Loffler 0806-0206 $30.00 Northwood Gen. I 0806-0213 $34.00 Northwood Gen. II 0806-0229 $30.00 Northwood Gen. III 0806-0206 $30.00 Park OLD Style 0806-0230 $30.00 Park NEW Style 0806-0208 $30.00


Adjustable Pressure Honing-Polishing Head

RIVAL CNC Blade

CN

C T

oolin

g

17

17

cNc TOOlINg

1” x 1” x 6” Silicon Carbide Rubbing Stick

Grit Item # Price#24 0809-0002 $5.00

Used for dressing diamond blades, and router bits.

Grit Item # Price#150 0809-0001 $2.50

Used for dressing diamond blades, and router bits.

¼” x 2” x 8” Alum Oxide Rubbing Stick

Cone not

included

• Exclusive to GCT• Takes the stress away.

Cone Clamp

3M Anti-Seize Compound

A high temperature lubricant designed to lubricate and prevent seizure of close fitting metal parts.

Holds cone without wear on the cone slots.

Suction Cups (Pods)

Available for all popular CNC and manual machinesAll Shapes - All Sizes - Call Today!

Like wide tires on a car, solid rubber vulcanized friction pads promote superior holding. Custom sizes available.

Item # T/H Type Price0806-0068 ISO 40 Flange D=63 $368.00

99-03-0041 $14.50

• ½” of travel to compensate tool wear and varying thickness without changing Z height.• Adjustable Pressure.• Polish Drain Board, Backsplashes, back of stone.• Great for Cup Wheels and Polishing Heads.• ½” Gas Thread.• Snail Lock Adaptor.• Center Water Feed.• Spanner Wrench for easy tool change.• Patent Pending.

Desc. Item # PriceHoning-Polishing Head 0806-0135 $394.00

130mm Attachment 0806-0142 $77.15

Size Item # Price6” 0805-0005 $160.008” 0805-0006 $175.00

25mm Arbor

Side Segments allow tighter radiused cutting!


Madein U.S.A.Made

in U.S.A.

Madein U.S.A.Made

in U.S.A.

CN

C Tooling

18

18

cNc TOOlINgfINgEr bIT

Highest quality available. Center waterfeed drilled holes between segments to remove swarf and keep the diamonds cool.

Used for marble and soft stone. Center waterfeed with drilled holes to keep the diamonds cool during the cut.

Blue Diamond Electroplate 1/2 Gas Finger Bits

Blue Diamond Segmented 1/2 Gas Finger Bits

Re-Plate andsave money!

Re-Tip andsave money!

1/2 Gas Finger Bits

1/2 Gas Finger Bits

1/2 Gas Finger Bits

BLU LINE med.-soft,soft granites,synthetic materialsCutting Depth Item # Price25 mm 0801-1220 $120.0035 mm 0801-1221 $125.0050 mm 0801-1083 $149.0060 mm 0801-1222 $230.00

ORANGE LINE engineered stones Cutting Depth Item # Price25 mm 0801-1223 $120.0035 mm 0801-1224 $125.0050 mm 0801-1225 $149.0060 mm 0801-1226 $230.00

GOLD LINE med.-hard and hard granites Cutting Depth Item # Price25 mm 0801-1218 $120.0035 mm 0801-1189 $125.0050 mm 0801-1076 $149.0060 mm 0801-1219 $230.00

Length Item # Price1-5/8” 0801-2074 $69.00

2” 0801-2075 $74.002-3/8” 0801-2076 $79.00

Length Item # Price3/4” 0801-0986 $97.507/8” 0801-0991 $120.00

High performance, and long life!

Length Item # Price1-5/8” 1107-0479 $98.332-1/2” 1107-0490 $125.00

Soft bond bits designed to be used on the hardest granites.

Bottom segment on end of bit gives the CNC operator the option of drilling into the slab like a core bit.

1/2 Gas Finger Bits

ARIX™DiamondArrangementTechnology

1/2 Gas Finger Bits

Length Item # Price1-5/8” 0801-2645 $99.00

2” 0801-2646 $109.00

To be used on granite and engineered stones.

3 Segments.

High Speed

Your everydayworkhorse!

Long Life! Description Item # Price25mm x 38mm 4301-0103 $147.00

25mm x 38mm RETIP 99-131-0013 $87.00

Description 30/40 Grit Price3/4” dia x 1 1/2” lg 4303-0035 $127.00

1” dia x 2” lg 4303-0036 $157.00

50/60 Grit Price4303-0037 $115.004303-0038 $147.00


Madein U.S.A.Made

in U.S.A.

CN

C T

oolin

g

19

19

cNc TOOlINg

Highest Quality diamond core bits available.

Blue Diamond SegmentedCore Drills 1/2 Gas

Blue Diamond Continuous Ring Core Drills 1/2 Gas

Granite City Tool can Re-Tip and Re-Electroplatemost BLUE DIAMOND Tools in 3-10 days.


Granite Line Thin wall sintered core drills 1/2 Gas Granite Line

Sintered core drills 1/2 Gas

Marble Line Electroplated core drills 1/2 Gas

Highest Quality diamond core bits available.


Electroplated core drills for marble.

Sintered core drills for granite.

Super High Speed sintered core drills with thin wall for granite.

cOrE DrIll

1/2 Gas Connection

Diam. Item # Price2 1/4” 1107-0254 $125.002 3/8” 1107-0255 $130.002 1/2” 1107-0256 $142.002 3/4” 1107-0257 $167.00

3” 1107-0258 $172.003 1/2” 1107-0259 $192.00

4” 1107-0260 $208.005” 1107-0261 $265.00

4” Cutting Depth 1-1/2” Cutting Depth

Diam. Item # Price Item # Price5/8” 1107-0205 $84.00 - -7/8” 1107-0207 $88.00 1107-0193 $75.00 1” 1107-0208 $90.00 1107-0177 $75.00

1 1/8” 1107-0209 $93.00 1107-0178 $77.00 1 1/4” 1107-0210 $94.00 1107-0179 $78.00 1 3/8” 1107-0211 $96.00 1107-0180 $82.00 1 1/2” 1107-0212 $99.00 1107-0181 $83.00 1 5/8” 1107-0213 $101.00 - -1 3/4” 1107-0214 $113.00 1107-0183 $90.00

2” 1107-0215 $117.00 1107-0184 $99.00

Diam. Item # Price25mm 0802-0012 $72.0030mm 0802-0013 $79.0032mm 0802-0014 $85.0035mm 0802-0020 $87.0038mm 0802-0015 $92.0040mm 0802-0016 $98.00

Diam. Item # Price20mm 0802-0009 $64.0035mm 0802-0010 $77.0080mm 0802-0011 $199.00

Diam. Item # Price20mm 0802-0006 $51.0035mm 0802-0007 $80.0080mm 0802-0008 $230.00


www.denver.sm

solutionfriendly technologies

Polishing Smoothing Texturing Bush-hammering Sand-blasted ... and much more!

NOT ONly fOr POlIsHINg!The new frontier of the machines for every type of surface finishings.

The exclusive floating head motion, combined with the X and Y cross moments with adjustable speed, assures an excellent polish on every kind of stone.

The efficient alternative toyour manual radial arm polisher in order to save labor cost without compromising the surface polish quality.

Machine dimensions (LxWxH): 216” x 108” x 95”Table dimensions (LxP): 150” x 75”Machine weight: 4,409 lbs.

Specs.

1 Bearings and linear guides, made of special hardened steel to ensure wear strength, with dust protection.

The springs unit system assembledon the working head ensures a good and homogeneous polish result, also on uneven surfaces. Motorized vertical travel (with safety limit switch) to adjust the tool pressure. Quick-coupling supports for abrasives.

Control panel with amperemeter, speed regulators for X and Y axes, PLC control for managing the 4 cycles in automatic mode.

2

3

3904-0090 $54,995.00

Self-contained water recycling: $16,995.00

$1,295/mo.*offer subject to credit approval

Solution M

achine

20

20

sOluTION macHINE

Single-head, automaticmonobloc polishing machine


Sol

utio

n To

olin

g

21

21

sOluTION TOOlINg

POLISHING SLABMaterials: Granite

PHASE Type Item # Price1 Frank Metal 60 4114-0276 $168.002 Plate Resin 30 4114-0277 $285.003 Plate Resin 50 4114-0278 $285.004 Plate Resin 150 4114-0279 $285.005 Plate Resin 300 4114-0280 $285.006 Plate Bak 500 4114-0281 $210.007 Plate Bak 1000 4114-0282 $210.008 Plate Bak 2000 4114-0283 $210.009 Plate with felter 4114-0284 $84.00

PHASE Frankfurt Type Item # Price1 Diamond Fil 36 4114-0285 $70.002 Diamond Fil 46 4114-0286 $70.003 Diamond Fil 60 4114-0287 $70.004 Silicon Abrasive 46 4114-0288 $42.005 Silicon Abrasive 60 4114-0289 $42.006 Silicon Abrasive 120 4114-0290 $42.007 Silicon Abrasive 220 4114-0291 $42.008 Silicon Abrasive 320 4114-0292 $42.00

PHASE Frankfurt Type Item # Price1 sic filament 36 4114-0293 $23.002 sic filament 46 4114-0294 $23.003 sic filament 60 4114-0295 $23.004 Silicon Ab. 120 4114-0290 $42.005 Silicon Ab. 220 4114-0291 $42.006 Silicon Ab. 320 4114-0292 $42.00

POLISHED AGEING/FLAMINGMaterials: Granite/Synthetic Materials: Marble

Plate 4116-0113 $300.00


Stone S

aws

22

22

sTONE sawsmaNTa

MANTA Mega Stone Slab Saw

Specifications :• Blade Motor Power: 7.5 hp 3 PH, 240V, 60Hz, 1,700 RPM • Length of cut: 11’ • Width of cut: 6’ • Vertical Travel: 9-1/2” • 0-90° Tilt Saw Motor for bevel cuts and profiling • Standard Blade Diameter: 14”-18” • Maximum cutting depth: 5.8” with 18” blade• 16’ (Length) x 7-1/2’ (Width) x 7’ (Height) • Total Weight: 4,850 lbs.

Cuts bothX & Y axis

40mm arbor

LASER GUIDE INCLUDED

The manufacturer guarantees the satisfactory function of the machine and undertakes to replace, free of charge, any parts that might deteriorate due to inadequate quality of materials or manufacturing defects within 12 months of the date of purchase. Any malfunctions caused by improper use, unauthorized alterations or lack of due care are excluded from this guarantee. In addition, the manufacturer declines any responsibility for direct or indirect damage. Machines returned under guarantee must be sent CARRIAGE PAID, and will be returned CARRIAGE FORWARD. The guarantee certificate is valid only if it is accompanied by a delivery note. All electrical, components are excluded from the guarantee.

*Manta Warranty:

11’ Cut Length

6’ Cut Width

This fully automatic slab saw will handle all your fabricating needs. It cuts slabs 11’ long x 6’ wide. It cuts automatically in the longitudinal and traverse ways as the head can turn for the traverse cuts. It has a built-in laser for precision cutting. The head also tilts for bevel cuts from 0-90°. The marine plywood table has built-in Omni-roller wheels that help to quickly position the slab.

*Blade not included*

Team up your Manta with the NEW GCT Slab Roller Table for the ultimate in versatility.

Ask a salesperson for details

More information on page 122

Warranty Info. Below

Saw4910-0012 $29,995.00

built in rollers in saw


23

Sto

ne S

aws

23

sTONE saws

Warranty Info. on Pg. 22

MANTA 200 ECO Semi-AutomaticStone Saw

30mm arbor

Specifications:• Motor: 5.5 hp - 240V, 3PH• RPM: 1,700• Blade Diameter: 14”-16”• Cutting Length: 6’6”• Throat Height: 10”• Cutting Depth: 5.7”• 0-45° tilt motor• Dimensions: 124” x 36” x 48”• Weight: 772 lbs.

6’6” Cut Length

The Manta 200 ECO Stone Slab Saw cuts longitudinal with speed control and moves up and down automatically. Can cut 90 to 45° in all kinds of stone slabs. Equipped with ship-plywood bench.


MANTA 300 Special Stone Slab Saw

40mm arbor

Specifications:• Motor: 7.5 hp, 240V, 3PH• RPM: 1,700• Blade Diameter: 14”-18” • Cutting Length: 10’• Throat Height: 5.7” • Cutting Depth: 5.7” • Dimensions: 160” x 40” x 55”• Weight: 1,543 lbs.

LASER GUIDE INCLUDED


10’ Cut Length

The Manta 300 Special Stone Slab Saw is suitable for small stone shops and large scale industrial stone fabrication. The ship-plywood bench is equipped with a lifting system that allows multi-directional positioning of the stone slabs. Saw is equipped with a submersed pump inside the base for blade cooling, water is reclaimed. The motorized cutting head allows for vertical and horizontal positioning and can cut 90 to 45° cuts in all kinds of stone slabs.

Saw

Additional Roller Table

Adjustable Fence


Team up your Manta with the NEW GCT Slab Roller Table for the ultimate in versatility.

Ask a salesperson for details

4910-0021 $17,995.00

4914-0107 $490.00

4914-0108 $2,690.00

maNTa

More information on page 122

4910-0009 $6,995.00


POrTablES

tone Saw

s

24

24

sTONE sawsmaNTa

MANTA Aluminum Saws

• Extremely portable - one person transport• Rust proof light weight aluminum• Precision cuts at 90° and 45°• Dust free cutting with water reclaiming table

Light, Strong,and Portable

ALL TILT 90° to 45°

Specifications:Motor: 120V, 1PH, 3hpRPM: 3,400 RPMBlade Diameter: 14” Cutting Depth: 4-1/4”


1” arbor

9¼” Cut Depth5’ Cut Length MANTA TB 120 LX Mini

Bridge Saw - 25” BladeMANTA Elite - 150

40mm arbor

*Bla

de n

ot

incl

uded

*


*Blade not

included*

1” arbor

4910-0018 $3,495.00Warranty Info. on Pg. 22

Specifications:Motor: 115V, 1PH, 3hpRPM: 3,400 RPMBlade Diameter: 14”

Robust, accurate, versatile and economical. Extremely accurate with head sliding by means of linear ball bearings on two chrome-plated bars. Equipped with a submersed pump inside the base for blade cooling, water is reclaimed. Has a 45° easy tilt head and a turn handle to raise and lower of motor. Takes 14” diamond blades, with 1” arbor to provide 4-1/4” thick cuts, 3” depth at 45°.

Cutting Length: 5’Cutting Depth: 4-1/4”Weight: 396 lbs.

Specifications:Motor: 230/440V, 3PH, 7.5 hpRPM: 1,700 RPMBlade Diameter: 25” Cutting Length: 39.4”

Throat Height: 10” Cutting Depth: 9-1/4”Weight: 419 lbs.

Robust, accurate, versatile and economical, this saw is built for cutting blocks for fixtures and fittings. Extremely accurate with head sliding by means of linear ball bearings on two chrome-plated and ground bars. Cutting control through belt drive of the head driven by a hand wheel positioned at the “operator station”. It is equipped with a submersed pump inside the base for blade cooling, water is reclaimed. Vertical motion head by means of hand wheel for stable and fast control. Inclinable head for 45 degree cuts.

Laser Guide Optional Equipment:

(99-626-0023)

(4914-0106)Roller Table

$193.75

$270.00

Saw C.L. Weight Item # PriceAlum 65 26” 134 lbs. 4910-0014 $2,095.00Alum 85 34” 145 lbs. 4910-0015 $2,295.00

Alum 100 40” 158 lbs. 4910-0017 $2,495.00

4916-0001 $3,995.00


Madein U.S.A.Made

in U.S.A.

MOTOR: Skil 8”® Milwaukee 12” AMPS: 13 15RPM: 4,300 5,000Voltage: 115 115Cycle: 50/60Phase: Single Blade Capacity: 8” 12” Arbor Size: DM 1”

Depth of Cut:0° – 2-1/16” 0° – 3-3/4” 45° – 1-7/8” 45° – 2-1/2” 60° – 1-5/16” 50° – 2”

25

Sto

ne S

aws

25

sTONE saws

Fab-Saw Jr.

The Fab-Saw Junior rail saw is designed for small to large fabrication shops or out on the job site. The Fab-Saw Junior has the capability of using 8” blades that will cut a full plunge cut over 3.5cm in depth. The Fab-Saw Junior is capable of fabricating any kitchen countertop. We stand behind this saw with a full one year warranty of workmanship which includes the motor and all electrical components.

The saw package includes:• 7 ¼ “ Hypoid Saw (accepts many 8” blades)• 120V, 13 Amp, 4,300 RPM, Type 2 Motor• Roller guide system• Waterfeed attachment with on/off control• 3 rails • Standard water fittings• G.F.I. (Ground Fault Interrupter)

Fab-Saw Rails: • Comes with three 6-1/2 ft., Precision T6 Extruded Aluminum Rails, accurate to .020 in. • 2 rails splice together to make one continuous 13ft. rail, accurate to .020 in.• Engineered tough. Expensive to produce but necessary for accurate cutting.• Each rail has durable rubber on the bottom that reduces the possibility of scratching the stone and coming off.• They can be shipped standard UPS to save on shipping costs.

TEQ-Track™ IV Manual

TEQ-TRACK™ FAS-TRACKFeatures:• Saw never touches material• Expandable rails• Cut over 2” thick material• Two 7’ rail sets, two clamps, four locking shoes, connector plate and carriage-mounted motor• Locking device for plunge cutting• Lightweight and portable• GFI

• Optional vacuum system anchors rails to material• Stronger carriage• Double rollers• 2 handles• Larger blade flange for straighter cuts

raIl

6001-0175 $2,695.00

1 Year LimitedWarranty

4908-0043 $2,380.00

4908-0046 $4,288.00


Water Filtration

26

26

waTEr fIlTraTION

Stoneworking Water Delivery SystemsHow Clean is Clean Enough?

GCT offers water filtration by design for the stone industry. The modular systems allow you to choose the acceptable level of cleanliness for use with your equipment, without spending more money than necessary.

The Cyclone Water Filtration System uses centrifugal technology to remove solids and provide gray water. Gray water is suitable for hand tools and bridge saws at a very low cost.

For Shops requiring crystal clear water additional Hurricane Filtration Systems can be added to meet the higher clarity levels needed for CNC and Automated Edge Machines. Numerous configurations available to deliver clear water in many flow rates. Hurricane Filtration Systems can be placed near machines, to minimize floor space usage.

Competitive water filtration systems filter dirty pit water to crystal clear clarity at huge cost. This level of clarity is not required for most fabrication equipment for optimal performance, resulting in wasted money.

Pit Water(Before Filters)

Gray Water(After Cyclone)

Crystal Clear Water(After Hurricane Filters)

*no chemical additives, environmentally friendly

The process of first separating the large & small particles following with individual Hurricane Filtration Systems allows you to upgrade easily & cost effectively when your clean water need increases.

The Most Effective and Environmentally Friendly System for Water Clarification• Uninterrupted Water Flow• Eliminates Industrial Discharge Permit Requirements• Sludge Collection Bags Allow Easy Disposal and Minimizes the Risk of Silica Dust Exposure Compare to “Dry Cake” Systems• Eliminates the Need for Multiple Pits• No Flocculent Required

Custom Design Filtration Systems• GCT Can Custom Design a Water Filtration System for Any Shop• Multiple options Available to Meet Your Filtration Requirements• GCT Will Provide a Complete Layout, Placing the Equipment in your Shop to Best Utilize Valuable Floor Space• All Parts Are Manufactured in the U.S.A.

Economical, Closed Loop Filtration System• Recycles 100% of Your Shops Water• Save Money By Reducing Your Water and Sewage Bills• Reduces the Need for Costly Pit Cleaning with Custom Fit Sweeper Package• Reduces the Need for Costly Flume Cleaning with Flume Flushing



Wat

er F

iltra

tion

27

27

Stoneworking Water Delivery SystemsCyclone Filtration System

This system is designed to supply uninterrupted gray water to the entire shop.The closed loop design allows for the reuse of all shop water reducing consumption and consolidating solids collection.

• Water Clarity Suitable for General Shop

• Custom Built to Meet Your Requirements

• Heavy-Duty Sealless Pump

• Available from 60 to 120 gpm

• Reduces Water Bill up to 90%

• No Need for Multiple Pits

By continuously separating the water fromthe dirty water pit and floor flumes thissystem removes solids from stoneworking applicationsand protects the equipment from the effects of abrasive wearand tear and extends the effective life of the processed water.

3” 60 GPM System

Standard System Sizes AvailableLarger sizes available consult factory for a specialized quotationLarger sizes available consult factory for a specialized quotation

3” Stoneworking Filtration System60 GPM Delivery




Typical Layout

waTEr fIlTraTION



Sludge Hopper is designed tocapture up to 2,000 lb.of stone sludge. DischargedSludge from the cyclone systemis collected into the SludgeHopper Bag. The stone sludgesettles to the bottom of the bag and begins tode-water itself. The excess fluid that is purged into the Sludge Hopper flows out of the collection bag and decants directly into a settling weir.

The Ebbco over-undersettling weir system providesmaximum settling time for removal of fine suspended solids. The Ebbco settlingweir is fitted with a disposable baffled sludge bag for easy change out.

The heavy-duty verticalsealless centrifugal pumpwith stand which is mounted directly into the dirty waterholding pit. This Pumpis designed to provide flowfrom the dirty water pit to the Cyclone Filtration System.The Stand is adjustablefrom 48” to 72” tall.

The Flume Nozzles aredesigned to be placed into thedirty water return troughs in the floor. The Nozzles use discharge water from the separator to keep the flumes free from stone sludge build up. The Flume nozzles force the sludge to the pit for filtering.

The Heavy-Duty Water DeliveryPump delivers the water from theGray Water holding Storage Tankand delivers gray water to the entireshop. Available in 60 & 120 gpm . Higher flow rates are available.

The eductor sweeper package is placed in the dirty water pit, it keeps the solids suspended and pushed toward the pit pump suction. The Sweeper Package is designed to reduce labor- intensive cleaning of sludge from the pit.

(sho

wn

with

opt

iona

l st

and

for e

asy

inst

alla

tion)

The Gray Water Holding Tank is designed to provide water storage for gray water delivery for the entire stone fabrication shop.

6205-

6204-

Stand 6204-0001 $708.95

6205-0003 $1,995.00

6205-0004 $1,850.00

6206-0001 $25.006205-

6206-0002 $13.35

3/8 poly Eductor

3/8 poly for Flume Flush

Water Filtration

28

28

waTEr fIlTraTION

Stoneworking Water Delivery Systems

Sludge Hopper

Settling Weir

Pit Pump

Flume Nozzles

Delivery Pump

Sweeper Package

System Components

Gray Water Holding Tank



Wat

er F

iltra

tion

29

29

Stoneworking Water Delivery SystemsHurricane Crystal Clear Filtration

The Hurricane Filtration System delivers point of use crystal clear water for CNC and Edge Polishers. System options offer uninterrupted water flow at a economical price. The Hurricane Filtration System can be added at any time to any water system.

Hurricane Filtration Systems are standard with the following options: • Filter Service Beacon for Filter Change out • Cleanable and Reusable Filter Cartridges • Stainless Steel Filter Housings • Pre-Plumbed and mounted to a base • Inlet/Outlet Gauges Quad

Uninterrupted Flow Series

Uninterrupted Water Flow SeriesIncludes Three-Way Isolation Valves and Filter Service Beacon

High Flow SeriesSystems Include Delivery Pump, Electrical Controls and Filter Service Beacon

Duplex Model10 gpm

Quad Model20 gpm

Hex Model30 gpm

Octo Model40 gpm

Single Model15 gpm

Duplex Model30 gpm

Triplex Model45 gpm

Quad Model60 gpm

6203-

waTEr fIlTraTION



6205-0001 $795.00

6205-0002 $450.00

Case of 2 6210-0001 $313.00

Water Filtration

30

30

waTEr fIlTraTION

Stoneworking Water Delivery Systems

“Lobster Pot” Flume ScreenThe “Lobster Pot” flume screen is designed to keep large stone chunks and floating debris out of the pit. A removable inner collection basket with handles makes clean out easy.

Ozone Generator Module

Designed to stop the formation of algae and bacteria in the gray water storage tank. By injecting ozone in to the holding tank it eliminates chemical water treatment, reduces maintenance costs by extending water life, increases filter life, helps eliminate odors and is environmentally friendly.

Filter Rinsing Station

Designed to Rinse the Hurricane Filter Cartridges for reuse. The removable standpipe keeps the cartridge in place while rinsing the cartridge for reuse with system water. The Sludge is collected under the rinsing station and is manually scraped out for disposal.

Hurricane Filter CartridgesThe (sub-micron) Hurricane Filter Cartridges are designed to remove solids through a polyestermedia that provides exceptional dirt holdingcapacity. Sludge is distributed evenly for longerlife and lower pressure drops. The cartridges canbe cleaned and reused repeatedly.

Cutaway

6205-



Wat

er F

iltra

tion

31

31

Stoneworking Water Delivery SystemsGCT can provide a custom designed filtration system, complete with layout of your shop placing the filtration equipment in best possible position utilizing valuable floor space.

60 gpm unit120 gpm unit withHurricane Filtration

Typical ApplicationsDiagram shows how the GCT filtration systems flow throughout your shop.

waTEr fIlTraTION



Water Filtration

32

32

waTEr fIlTraTION

Waterjet Filtration Systems

Model Number GRS-0150 GRS-0200 GRS-0250 GRS-0303 GRS-0402 GRS-0502Sq Footage 0-20 21-30 31-40 41-100 101-170 171/250Flow Rate (GPM) 70 100 150 290 450 600Motor HP 5 7.5 10 15 20 30Voltage 220/460 220/460 220/460 220/460 220/460 220/460FLA 14.5/8.0 22.6/12.3 27/14.5 42/22 54/28 78/40Suction Size 2” 3” 3” 4” 4” 6”Discharge Size 1.5” 2” 2” 3” 4” 6”

Ebbco’s Abrasive Removal System is designed to continuously remove the spent abrasive that collects in the catch tank, thus eliminating downtime for clean out and maximizes production. The Abrasive Removal can beretrofitted to any Abrasive Waterjet Cutting machine tool.

• Maximizes Productivity• Eliminates Downtime for Catch Tank Cleaning• Waste Disposal Program Available• Reduces the Possibility of Thermal Distortion• Reduces Closed Loop Consumable Costs• Full One Year Warranty on Pump*• Typical ROI - 15 months or less

Selection of an Abrasive Removal System is based on square footage of the Water-Jet catcher tank and number of cutting heads. Catcher tanks are unique and may contain obstacles such as support stanchions and bladders. Ebbco engineers will design a sweeper package to fit any Water-Jet catcher tank. The sweeper package is designed to move large quantities of abrasive laden water along the bottom of the tank, toward a suction port. Before entering the separator, the abrasive laden water is pre-filtered through a suction strainer, which collects larger parts that accumulate during the cutting process.

*Based on 2,080 hrs

Model: GRS-0303Abrasive Bag Hopper 6202-



Wat

er F

iltra

tion

33

33

Waterjet Filtration SystemsThe Ebbco Closed Loop Filtration Systemis designed to close the drain by filtering the overflow water from the Waterjet table through a bag filter polishing the water with the Ebbco Hurricane Filter Cartridge and controlling the dissolved solids with a DI Resin Vessel, controlled by a TDS meter. The Clean, Treated water is then returned to the high pressure pump at the pump manufactures proper specification.

• Close the drain.• Drastically reduce water consumption. • Treat make-up water to OEM specification.• Maximizes pump performance.• Maximizes orifice/mixing tube life.• ISO 14001 mandatory system.• Reduce the need for makeup water

Ebbco’s Inline Chillers are designed to be used in conjunction with the Ebbco Closed Loop Filtration System. In this capacity the chiller will provide the hydraulic Cooling for the High Pressure Pump as well as the cooling for the cutting water in the Closed Loop Filtration System. This provides cooled, TDS Controlled water for cutting purposes, maximizing high pressure pump seal life. We offer various models to work with all Waterjet manufactures high pressure pumps. Sizes range from 24,000 BTU - 240,000 BTU.

The Ebbco Closed Loop Chillers are designed to cool the hydraulics on the high pressure intensifier pumps. This allows our clients to eliminate the discharge of hydraulic cooling water to drain. Each Ebbco Closed Chiller comes complete with Installation Kit and Glycol for Start up. Sizes range from 24,000 BTU - 180,000 BTU.

Chillers

Model:

CLS-141-36k

6202-

6207-

6207-

waTEr fIlTraTION



Water Filtration

34

34

waTEr fIlTraTION

Waterjet Filtration Systems

Abrasive Removal Weir Systems

Closed Loop ConsumablesReplacement Vessels Seals

Miscellaneous Parts

Part Number Description GRS-ABH Abrasive Bag Hopper with BagGRS-ABHB Abrasive Hopper Replacement Bag

Part Number Description CLS-SWS Settling Weir System with Replaceable BagCLS-SWSB Settling Weir Replacement Bag

Part Number Vessel No. Case QtyCLS-1-G2PS-EA 1 25CLS-HR-930-Q.35 2 2CLSR-WJR-100-PKG 3 1CLS-WJR-ERC-1 3 1CLS-801-0.35 4 4CLS-PFB-150 Dirty Tank 1

Part Number Vessel No.CLS-0833-ORL-BC 1CLS-SK-2 2CLS-SK-3 3CLS-801-ORL 4

Part Number Description CLS-HHM Hand Held Digital TDS MeterCLS-RPK-NPE Filter Pump Seal KitCLS-395008 Delivery Pump Seal KitCLS-STW Stick of Wax for Filter Lubrication

System Options & Replacement Parts

Garnet Available

Call for Pricing!Garnet Available

Call for Pricing!

Garnet abrasive is used in the operation of waterjet cutting.

Available in 55lbs bags as well as 2,200 or 4,400 lb pallets.

800-328-7094800-328-7094



1 2 3

Templateson page 115

35

Sin

k M

achi

nes

35

sINk macHINEs

GCT - 1/2 Gas Stainless Steel

GCT - 1/2 GasStainless Steelwith Hydro Port

With its small foot print, versatile radial arm, and powerful 3 hp variable speed 2,700 to 10,000 RPM motor, the Rebel can easily mill through granite and marble in minutes. Drilling utilities is as simple as turning a hand crank and edge shaping is virtually effortless with no fears of scratching the stone surface. Almost any size of granite or marble can be machined because of the 4’ reach. The Rebel is the most affordable all-in-one work center on the market. It also runs on a standard 220V, single phase, 20 Amp service.

3904-0068 $12,900.00

The Patriot Rebel was designed with economical sink cut-outs in mind.

Madein U.S.A.Made

in U.S.A.

4308-0135 $189.00

4308-0134 $89.00

Threaded DiamondTurbo Tips

This mandrel measures 5” in length, ½ gas connection, made of stainless steel, brass and is center water feed. Use our plastic sink templates as a cut-out guide for fast, precise sink cut-outs. Unique features include a hydro port behind the brass bushing to allow for cooling and prevent sediment build up. Also replaceable retention cap that allows you to use this Mandrel for years. Buy your last Mandrel First at Granite City Tool.

The Ultimate Speedy Bit Mandrel for Radial Arm Machines

Features:• 220 Volt Single phase.• 114” travel, 30” travel, and 8” travel.• Dust free operation.• Rugged construction.• Precision control raise/lower with friction brake.• 3 point adjustable work surface.• Installs in minutes.• Full 1 year manufacturer’s warranty.• Made in the USA.

Madein U.S.A.Made

in U.S.A.3904-0078 $18,900.00Call for more information!

(1) 23mm 4303-0047 $59.00(2) 20mm 4308-0188 $69.00(3) 15mm 4303-0003 $79.00

99-400-0025$19.95

(replaceable brass)

99-400-0015$19.95

99-400-0004$19.95


Page 49

Edging M

achines

36

36

EDgINg macHINEs

LWW2106VR 40mm Edge Shaping Machine

LWW1506VR30mm Edge Shaping Machine

Contour Cat - KS-80\3

Lightweight and preferred over large routers for 30mm material. Variable speed 2,000 - 6,000 RPM, 120V-12 Amp. Plastic wheels and center waterfeed. External waterfeed available at extra charge. Includes GFI. * 1/2 gas female arbor

Heavy duty and costs much less than comparable routers for 40mm material. Variable speed 2,000 - 6,500 RPM, 120V - 15 Amp. Has plastic wheels and has both a center waterfeed and external waterfeed. Includes GFI. * 1/2 gas female arbor

This German built industrial 2 hp, variable speed router is the most versatile machine ever built for countertop work. Perfect for edging countertops up to 4cm using Q4 Diamond Router Bits. Also is small enough to cleanup, edge and polish inside sink holes! No other machine on the market can do all this. Has height adjustment plate, splash guard, and a central and external waterfeed. Felt plate rides on a layer of water to help prevent surface scratching. The motor is very powerful and will last for years.

• 5/8”-11 threaded arbor**• Voltage: 120V - 56/60 Hz • Power Input: 1,300W, 1,500W • Horse power: 1.8 hp, 2.0 hp, 12.5 Amp • Max. Tool Diameter: 5” (120mm)• Variable Speed: 2,400 to 6,800 RPM • Weight: 14.3 lbs.

Comes with FREE

heavy duty carrying case

Oscillating Head and Diamond Drum Wheels Available, See Page 50** 5/8”-11 thread to 21mm adapters on Page 71 for standard router bits

KS-80\3 with brazeddrum wheels

* 1/2 Gas Thread to 21mm adapters on Page 71 for standard router bits

Variable Speed6 Month Limited

Warranty



X-TREME JR.

6 Month LimitedWarranty

This new design is the first of its kind. It features the Makita 9565CV with its lasting power and variable speed from 2,850 to 10,500 RPM. The Aquaplaning bottom gives effortless movement.

• Aquaplaning• 120V, 12 Amps• 5/8”-11 threaded arbor**• Full height adjustment

Affordable Alternative

Router

6001-0363 $995.00

4306-0080 $2,420.00

1506VR 4305-0001 $895.951/2 gas 4308-0097 $39.25

2106VR 4305-0002 $1,499.001/2 gas 4308-0097 $39.25


Edgemarc Stinger M1

4305-0028 $4,495.00*

37

Edg

ing

Mac

hine

s

37

EDgINg macHINEs

STONE PRO - Beaver Rock Pitch Slab EdgerCreate a natural stone edge with ease with the “Beaver” from Stone Pro. Anyone can rock pitch perfectly with this easy-to-use machine. No more broken corners or sloppy edges. Air supply: 3 cfm at 90 psi (1/4” npt connection). Plastic base plate prevents scratching. Creates a natural, chiseled edge great for inside and outside radius edging and 90° corners. Comes complete and ready to use.

LimitedWarranty

1-5/8” Bite 4305-0007 $1,969.002-3/4” Bite 4305-0008 $2,995.00

2-3/

4”1-5/

8”

ROCKBITER I & II

Can chisel stone from 2cm to 4cm.

The solution to efficiently produce chiseled looking edges on fabricated stone surfaces. Requires less skill and training than hammer and chisel methods.

I

II Can chisel from 4cm to 6cm on all stones.

I

II

Madein U.S.A.Made

in U.S.A.

The DIA-PRO X-TREME MACHINES are now available in two models: the original 3 hp variable speed and the new 1-1/2 hp single speeds. Both models are heavy-duty and made for X-treme industrial usage. Both models are made in the USA and include a one year limited warranty. X-treme machines have easily adjustable height knobs and lock knobs to ensure accurate edging. Both models come standard with our exclusive hydroplaning base to prevent scratching of the stone surface and allow effortless operation. It outperforms other brands in power, speed, and ease of operation.

• 240 Volt, 3 phase, 3 hp inverter motor single-phase input • Variable speed from 3,000 - 10,000 RPM• GFI converter box• Invert control

Every Edgemarc, INC tool is thoroughly inspected and tested before leaving the factory. Edgemarc, INC warrants for one year from date of purchase all Edgemarc tools, which do not perform satisfactory due to defects caused by faulty material of workmanship. Our obligation assumed under this warranty is limited to the repair or replacement of parts, without charge, which are defective and which have not been misused, carelessly handled, defaced by repairs made or attempted by others and/or normal wear and tear. This warranty is in lieu of all other warranties expressed or implied.

**Edgemarc, INC One year Warranty:

• Single-phase, 1-1/2 hp inverter motor • Includes Ground Fault Interrupter (GFI)• 10,000 RPM speed

X-TREME Single Speeds

240V

X-TREME Variable Speed

4305-0004 $3,995.00*4305-0015 $2,295.00* *while supplies last

• Runs on 220 Volt Single Phase, 3HP• Variable speed from 3,000 - 10,000 RPM• Built in Industrial Grade G.F.C.I.• Computerized Intelligent Motor Control

3112-0028 $750.00

3112-0030 $895.00


Portable Bits Starton Next Page

Edging M

achines

38

38

EDgINg macHINEsmasTEr

• Threephase electric motor 48 volts• Asynchronous B14 motor, 1.4 HP, 50/60 hz• Motor speed 2,800 RPM• Shaft speed: 4,200 RPM• Anticorodal steel• INOX steel structure• Screws in stainless steel

• Variable speed: 2800-5600 RPM• Asynchronous 3ø motor, 3.5 HP, 48 volts, 50/60 hz• Mechanical structure in aluminium, anticorodal and stainless steel; • Screws in stainless steel• Housing in fireproof polypropylene (super-light)• Isolation ch, term. 140° c• Transmission poly/v, 10 g• Special treatment: mechanical parts are galvanized, aesthetic part are heat painted

The Masters are portable electric contouring machines with “WATER SYSTEM” base plate which creates a gliding water film between the machines and the slab. This system immediately eliminates the stone pieces broken during the working without scratching the surfaces. These machines are built with high-quality materials chosen between the best producers of rough materials.

MASTER 3500 (Variable Speed)

MASTER 2800 (Single Speed)

Base Plate 2800Base Plate 3500“Water System”

Plate 3500 Conversion Unit

4305-0030 $4,384.00

4305-0033 $2,923.00

4305-0031 $858.004308-0183 $610.004308-0179 $350.004308-0181 $382.00


Perfect FormPortable Tooling

They allow a good grinding and keep their shape thanks to the peculiar sinterizationprocess. They are perfect for the medium size production of all kind of works.

They grant a fast working. Thanks to the special diamond and the innovative sintered process these tools grant a faster grinding in comparison with all other tools on the market and also the best price/quality ratio.

39

Rou

ters

& P

rofil

es

39

mETals POs. 1&2

rOuTErs & PrOfIlErs

Shape POS 1 POS 2 PriceA20r10 4313-0601 4313-0602 $156.00 A30r5 4313-0605 4313-0606 $177.00 A30r15 4313-0611 4313-0612 $177.00 A30r20 4313-0623 4313-0624 $177.00 A40r20 4313-0635 4313-0636 $205.00 B20 4309-0142 4309-0143 $180.00 B30 4309-0131 4309-0132 $203.00 B+B20 4313-0647 - $180.00 B+B30 4313-0651 4313-0652 $203.00 Z30 4313-0661 4313-0662 $160.00 ZR20 4313-0671 4313-0672 $155.00 ZR30 4313-0681 4313-0682 $160.00 E20 4312-0062 4312-0063 $177.00 E30 4312-0074 4312-0075 $212.00 F20 4313-0528 4313-0529 $185.00 F30 4313-0686 4313-0687 $198.00 H20 4304-0142 4304-0143 $160.00 H30 4304-0131 4304-0132 $170.00 H+A30 4313-0697 4313-0698 $177.00 L20 4313-0708 4313-0709 $177.00 L30 4313-0729 4313-0730 $185.00

O20 4313-0740 4313-0741 $177.00 O30 4313-0713 4313-0714 $203.00 OG30 4313-0717 4313-0718 $260.00 FZ30 4313-0745 4313-0746 $198.00 Q20 4313-0840 4313-0841 $177.00 Q30 4313-0750 4313-0751 $203.00 T30r10 4313-0771 4313-0772 $161.00 T30r5 4313-0776 4313-0777 $161.00 V20 4310-0251 4310-0252 $156.00 V30 4310-0257 4310-0258 $161.00 SM30 4310-0262 4310-0263 $161.00 V40 4310-0267 4310-0268 $176.00 V50 4310-0279 4310-0280 $310.00 V60 4310-0291 4310-0292 $320.00 X+D30 4313-0788 4313-0789 $255.00 T20r3 4313-0798 4313-0799 $180.00 T30r3 4313-0808 4313-0809 $185.00 T40 4313-0818 4313-0819 $195.00 AR20 4310-0828 4310-0829 $180.00 AR30 4313-0838 4313-0839 $185.00 AR30 2x2 4313-0850 4313-0851 $185.00 AR40r3.5 4313-0860 4313-0861 $195.00

Profiling wheels with rotating toucher which allows an exceptional grinding and keeps their shape over their entire lifespan thanks to our innovative technologies.

Mamro Elettromeccanica’s Master Line router bits give you the power to profile and polish without adjusting the height of your router. Router height is set by using the Pos. 3 Bi-Power bit, a non-deforming profile rectification bit always producing a perfect profile for the polishing bits to follow. All of the bits, metals and polishers, are designed to be ran at the same height. By setting the height with the final metal, guessing where the top line of the profile will finish is eliminated.

It’s that easy!


Routers &

Profiles

40

40

rOuTErs & PrOfIlErsfull sETs

POS. Item # Price1 4313-0591 $330.002 4313-0592 $280.003 4313-0593 $230.004 4313-0594 $107.005 4313-0595 $107.006 4313-0596 $107.00

POS. Item # Price1 4313-0512 $330.002 4313-0513 $330.003 4313-0514 $280.004 4313-0515 $117.005 4313-0516 $117.006 4313-0517 $117.00

POS. Item # Price1 4313-0539 $410.002 4313-0540 $330.003 4313-0541 $280.004 4313-0542 $117.005 4313-0543 $117.006 4313-0544 $117.00

A20 r10

A30 r5 A30 r15 A30 r20

A40 r20 B20 B30

B+B20 B+B30 Z30

ZR20 ZR30

1-0 4313-0599 $280.00

1-0 4313-0609 $330.00POS. Item # Price

1 4313-0613 $410.002 4313-0614 $330.003 4313-0615 $280.004 4313-0616 $117.005 4313-0617 $117.006 4313-0618 $117.00

1-0 4313-0621 $330.00

POS. Item # Price1 4313-0625 $430.002 4313-0626 $400.003 4313-0627 $350.004 4313-0628 $147.005 4313-0629 $147.006 4313-0630 $147.00

1-0 4313-0633 $400.00POS. Item # Price

1 4309-0133 $370.002 4309-0134 $315.003 4309-0135 $290.004 4309-0136 $117.005 4309-0137 $117.006 4309-0138 $117.00

1-0 4309-0141 $315.00

POS. Item # Price1 4309-0122 $450.002 4309-0123 $380.003 4309-0124 $320.004 4309-0125 $132.005 4309-0126 $132.006 4309-0127 $132.00

0-0 4309-0121 $320.001-0 4309-0130 $380.00

POS. Item # Price1 4313-0637 $395.002 4313-0638 $320.003 4313-0639 $290.004 4313-0640 $132.005 4313-0641 $132.006 4313-0642 $132.00

1-0 4313-0645 $320.00

POS. Item # Price1 4313-0546 $490.002 4313-0547 $360.003 4313-0548 $300.004 4313-0549 $154.005 4313-0550 $154.006 4313-0551 $154.00

0-0 4313-0545 $300.001-0 4313-0650 $360.00

POS. Item # Price1 4313-0653 $310.002 4313-0654 $310.003 4313-0655 $259.004 4313-0656 $121.005 4313-0657 $121.006 4313-0658 $121.00

POS. Item # Price1 4313-0663 $295.002 4313-0664 $295.003 4313-0665 $229.004 4313-0666 $112.005 4313-0667 $112.006 4313-0668 $112.00

POS. Item # Price1 4313-0673 $320.002 4313-0674 $320.003 4313-0675 $260.004 4313-0676 $121.005 4313-0677 $121.006 4313-0678 $121.00

E20 POS. Item # Price1 4312-0053 $360.002 4312-0054 $295.003 4312-0055 $250.004 4312-0056 $107.005 4312-0057 $107.006 4312-0058 $107.00

SHS Gold Segmented Frangiestone

Professional Bi-Power Long-LifekEy

M8 Master Line Portables



This line is composed of profile wheels from fast grinding to brilliant polishing.

Using the complete set of our profile wheels, you will have the following advantages: perfect polishing; no lines or waves on the profile; no dust while working; no further manual work.


41

Rou

ters

& P

rofil

es

41

full sETsrOuTErs & PrOfIlErs

F30

H20 H30 H+A30

L20 L30 O20

O30 OG30 FZ30

Q20 Q30 T30 r10

POS. Item # Price1 4313-0506 $480.002 4313-0507 $410.003 4313-0508 $350.004 4313-0509 $154.005 4313-0510 $154.006 4313-0511 $154.00

0-0 4313-0505 $350.001-0 4313-0685 $410.00

POS. Item # Price1 4304-0133 $350.002 4304-0134 $305.003 4304-0135 $270.004 4304-0136 $139.005 4304-0137 $139.006 4304-0138 $139.00

1-0 4304-0141 $305.00

POS. Item # Price1 4304-0122 $380.002 4304-0123 $340.003 4304-0124 $305.004 4304-0125 $154.005 4304-0126 $154.006 4304-0127 $154.00

0-0 4304-0121 $310.001-0 4304-0130 $340.00 POS. Item # Price

1 4313-0688 $390.002 4313-0689 $350.003 4313-0690 $315.004 4313-0691 $154.005 4313-0692 $154.006 4313-0693 $154.00

1-0 4313-0696 $350.00

POS. Item # Price1 4313-0699 $370.002 4313-0700 $310.003 4313-0701 $270.004 4313-0702 $139.005 4313-0703 $139.006 4313-0704 $139.00

POS. Item # Price1 4313-0719 $410.002 4313-0720 $320.003 4313-0721 $290.004 4313-0722 $154.005 4313-0723 $154.006 4313-0724 $154.00

1-0 4313-0727 $320.00

POS. Item # Price1 4313-0731 $390.002 4313-0732 $340.003 4313-0733 $305.004 4313-0734 $132.005 4313-0735 $132.006 4313-0736 $132.00

1-0 4313-0739 $340.00

POS. Item # Price1 4313-0553 $490.002 4313-0554 $395.003 4313-0555 $345.004 4313-0556 $154.005 4313-0557 $154.006 4313-0558 $154.00

0-0 4313-0552 $340.001-0 4313-0712 $395.00 POS. Item # Price

1 4313-0560 $580.002 4313-0561 $510.003 4313-0562 $410.004 4313-0563 $154.005 4313-0564 $154.006 4313-0565 $154.00

1-0 4313-0559 $510.00

POS. Item # Price1 4313-0567 $480.002 4313-0568 $410.003 4313-0569 $350.004 4313-0570 $154.005 4313-0571 $154.006 4313-0572 $154.00

0-0 4313-0566 $350.001-0 4313-0744 $410.00

POS. Item # Price1 4313-0752 $390.002 4313-0753 $340.003 4313-0754 $305.004 4313-0755 $132.005 4313-0756 $132.006 4313-0757 $132.00

1-0 4313-0760 $340.00

POS. Item # Price1 4313-0574 $490.002 4313-0575 $395.003 4313-0576 $345.004 4313-0577 $154.005 4313-0578 $154.006 4313-0579 $154.00

0-0 4313-0573 $340.001-0 4313-0749 $395.00 POS. Item # Price

1 4313-0761 $410.002 4313-0762 $390.003 4313-0763 $305.004 4313-0764 $129.005 4313-0765 $129.006 4313-0766 $129.00

1-0 4313-0769 $390.00

E30 F20POS. Item # Price

1 4312-0064 $410.002 4312-0065 $345.003 4312-0066 $270.004 4312-0067 $117.005 4312-0068 $117.006 4312-0069 $117.00

1-0 4312-0072 $345.00POS. Item # Price

1 4313-0519 $395.002 4313-0520 $315.003 4313-0521 $285.004 4313-0522 $132.005 4313-0523 $132.006 4313-0524 $132.00

1-0 4313-0527 $315.00


Professional Bi-Power Long-Life kEy


Routers &

Profiles

42

42

rOuTErs & PrOfIlErsfull sETs

V30

SM 30 V40 V50

V60 X+D30 T20 r3

T30 r3 T40 AR20

AR30 AR30(2x2)

AR40 r3.5

POS. Item # Price1 4310-0222 $410.002 4310-0223 $380.003 4310-0224 $295.004 4310-0225 $129.005 4310-0226 $129.006 4310-0227 $129.00

1-0 4310-0255 $380.00

POS. Item # Price1 4310-0234 $380.002 4310-0235 $380.003 4310-0236 $295.004 4310-0237 $129.005 4310-0238 $129.006 4310-0239 $129.00

1-0 4310-0261 $380.00

POS. Item # Price1 4310-0241 $490.002 4310-0242 $440.003 4310-0243 $380.004 4310-0244 $142.005 4310-0245 $142.006 4310-0246 $142.00

0-0 4310-0240 $380.001-0 4310-0266 $440.00

POS. Item # Price1 4310-0269 $710.002 4310-0270 $620.003 4310-0271 $550.004 4310-0272 $176.005 4310-0273 $176.006 4310-0274 $176.00

0-0 4310-0277 $490.001-0 4310-0278 $620.00

POS. Item # Price1 4310-0281 $750.002 4310-0282 $640.003 4310-0283 $530.004 4310-0284 $204.005 4310-0285 $204.006 4310-0286 $204.00

0-0 4310-0289 $530.001-0 4310-0290 $640.00

POS. Item # Price1 4313-0778 $580.002 4313-0779 $510.003 4313-0780 $439.004 4313-0781 $154.005 4313-0782 $154.006 4313-0783 $154.00

0-0 4313-0786 $430.001-0 4313-0787 $510.00

POS. Item # Price1 4313-0790 $380.002 4313-0791 $380.003 4313-0792 $275.004 4313-0793 $114.005 4313-0794 $114.006 4313-0795 $114.00

POS. Item # Price1 4313-0800 $390.002 4313-0801 $390.003 4313-0802 $280.004 4313-0803 $129.005 4313-0804 $129.006 4313-0805 $129.00

POS. Item # Price1 4313-0810 $410.002 4313-0811 $410.003 4313-0812 $330.004 4313-0813 $142.005 4313-0814 $142.006 4313-0815 $142.00

POS. Item # Price1 4310-0820 $380.002 4310-0821 $380.003 4310-0822 $275.004 4310-0823 $114.005 4310-0824 $114.006 4310-0825 $114.00

POS. Item # Price1 4313-0830 $390.002 4313-0831 $390.003 4313-0832 $280.004 4313-0833 $129.005 4313-0834 $129.006 4313-0835 $129.00

POS. Item # Price1 4313-0842 $390.002 4313-0843 $390.003 4313-0844 $280.004 4313-0845 $129.005 4313-0846 $129.006 4313-0847 $129.00

POS. Item # Price1 4313-0852 $410.002 4313-0853 $410.003 4313-0854 $330.004 4313-0855 $142.005 4313-0856 $142.006 4313-0857 $142.00

T30 r5 V20POS. Item # Price1 4313-0580 $410.002 4313-0581 $390.003 4313-0582 $305.004 4313-0583 $129.005 4313-0584 $129.006 4313-0585 $129.00

POS. Item # Price1 4310-0228 $395.002 4310-0229 $330.003 4310-0230 $280.004 4310-0231 $114.005 4310-0232 $114.006 4310-0233 $114.00

1-0 4310-0249 $330.00




For: X-Treme, Sector, Master, Stinger, Flex, & Standard Routers

Diamond Router Bits

43

Rou

ters

& P

rofil

es

43

aPEXX®

rOuTErs & PrOfIlErs

Shape Size Profile POS 1 POS 2 Price1 1-30 Pencil 4313-0466 - $307.00A 1/4” Radius 4313-0036 4313-0096 $167.00A 3/8” (10mm) Radius 4313-0037 4313-0097 $165.00B 3/8” (10mm) Half Bullnose 4313-0038 4313-0088 $166.00B 1/2” (15mm) Half Bullnose 4313-0039 4313-0089 $172.00B 3/4” (20mm) Half Bullnose 4313-0040 4313-0090 $174.00B 1-1/4” (30mm) Half Bullnose 4313-0041 4313-0091 $265.00

B+B 1-1/4” (30mm) Triple Waterfall 4313-0234 4313-0235 $403.00E 3/4” (20mm) Bevel Router 4313-0042 - $190.00E 1-1/4” (30mm) Bevel Router 4313-0043 - $234.00F 3/4” (20mm) Ogee 4313-0044 4313-0052 $165.00F 1-1/4” (30mm) Ogee 4313-0045 4313-0053 $233.00

FV 1-1/4” (30mm) Ogee Bullnose 4313-0348 4313-0349 $375.00FV 1-1/2” (40mm) Ogee Bullnose 4313-0201 4313-0202 $392.00

F+V 1-1/4” (30mm) Ogee+Bullnose 4313-0419 4313-0420 $510.00F+V 1-1/2” (40mm) Ogee+Bullnose 4313-0394 4313-0395 $567.00

H 3/4” (20mm) Dupont 4313-0208 4313-0209 $212.00H 1-1/4” (30mm) Dupont 4313-0212 4313-0301 $224.00O 1-1/4” (30mm) Cove Dupont 4313-0220 4313-0221 $347.00T 30/40mm Double Eased 4313-0387 - $375.00Q 3/4” (20mm) Cove Ogee 4313-0210 4313-0211 $297.00Q 1” (25mm) Cove Ogee 4313-0332 4313-0333 $345.00Q 1-1/4” (30mm) Cove Ogee 4313-0390 4313-0497 $347.00V 3/4” (20mm) Full Bullnose 4313-0046 4313-0092 $259.00V 1-1/4” (30mm) Full Bullnose 4313-0047 4313-0093 $280.00V 1-1/2” (40mm) Full Bullnose 4313-0048 4313-0094 $295.00Z 3/4” (20mm) Double Bevel 4313-0049 - $270.00Z 1-1/4” (30mm) Double Bevel 4313-0050 - $270.00

Other POS 0 are available upon request.

High performance proved! Fast cutting and long lasting!

Shape Size Profile POS 0 PriceB 3/4” (20mm) Half Bullnose 4313-0590 $207.00B 1-1/4” (30mm) Half Bullnose 4313-0518 $307.00F 3/4” (20mm) Ogee 4313-0503 $200.00F 1-1/4” (30mm) Ogee 4313-0491 $279.00V 1-1/4” (30mm) Full Bullnose 4310-0219 $308.00


Longer life than brazed wheels, money back guarantee!

Madein U.S.A.Made

in U.S.A.

4cm Laminated Joint Clean-up Bit

This bit smooths and cleans a glue joint in preparation for a V40 or T40 edge on laminated stone. Comes with two top bearings for 1/16” & 1/8” depth.

Sector/Master Connection

Breaker Wheel

• Fast Cutting• Single or Double use

• Chip free center bearing

1 bit for 20, 30 or 40mm!

4302-0184 $250.00

4308-0187 $239.00

Routers &

Profiles

44

44

rOuTErs & PrOfIlErs

POS 130/40 Diamonds

Blue Diamond Plated Wheels with Ghines Connection

POS 250/60 Diamonds

Granite City Tool can Re-Tip and Re-Electroplate most Blue Diamond Tools in 3-10 days.

Description Form Thickness Item # Price Item # Price3/16” R A & B --- 4309-0042 $162.00 4309-0064 $133.001/4” R A & B --- 4309-0043 $162.00 4309-0065 $150.003/8” R A & B 2 cm (A) 4309-0044 $215.00 4309-0066 $192.001/2” R A & B 1” (A) 4309-0045 $245.50 4309-0067 $202.005/8” R A & B 3 cm (A) 4309-0046 $253.50 4309-0068 $205.002 cm R A & B 2 cm (B) 4309-0055 $289.00 4309-0069 $217.003 cm R B 3 cm 4309-0028 $359.00 4309-0071 $262.00

2” R B 2” 4309-0058 $530.00 4309-0073 $425.00

1 1/2” V 1 1/2” 4310-0121 $442.00 4310-0139 $342.002” V 2” 4310-0118 $523.00 4310-0140 $400.00

2 cm R V 2 cm 4310-0114 $375.00 - -3 cm R V 3 cm 4310-0116 $414.00 - -

Ogee 2 cm F 2 cm 4304-0092 $240.00 4304-0097 $217.00Ogee 3 cm F 3 cm 4304-0093 $297.00 4304-0098 $238.00

3/4” R convex L 4313-0163 $238.00 4313-0168 $210.00

45° Bevel, 1/4” E --- 4312-0012 $142.50 4312-0021 $147.0045° Bevel, 1/2” E --- 4312-0013 $189.00 4312-0022 $150.00

45° Bevel, 1 1/4” E 1 1/4” max. 4312-0016 $262.00 4312-0023 $250.0060° Bevel, 1 1/4” E 1 1/4” max. 4312-0017 $262.00 4312-0024 $225.00

Half B

ullnose w/ bottom

bearing Full B

ullnose w

/ center bearing w

/ bottom bearing


Madein U.S.A.Made

in U.S.A.

Madein U.S.A.Made

in U.S.A.

5/8” R x 2 1/2” Ø Convex Wheel 1906-0126 $157.00 - -3/4” R x 2 1/2” Ø Convex Wheel 1906-0127 $165.00 1906-0133 $163.00

3” Ø x 1” thk. 45° Bevel Wheel 1906-0128 $179.00 1906-0134 $175.00

45

Rou

ters

& P

rofil

es

45

rOuTErs & PrOfIlErs

Blue Diamond Profile Wheels with Bearing Guide & Center Waterfeed with 5/8-11 threaded connection POS 1

30/40 Diamonds POS 2

50/60 Diamonds

Granite City Tool can Re-Tip and Re-Electroplate most Blue Diamond Tools

in 3-10 days

Blue Diamond 1/2” Shaft Router Tools30/40 Diamonds 50/60 Diamonds

SAVE MONEY!

Description Form Thickness Item # Price Item # Price3/16” R A & B --- 4309-0036 $203.00 4309-0074 $187.003/8” R A & B 2 cm (A) 4309-0038 $225.00 4309-0076 $208.001/2” R A & B 1” (A) 4309-0039 $267.00 4309-0077 $242.005/8” R A & B 3 cm (A) 4309-0040 $285.00 4309-0078 $245.003 cm R B 3 cm 4309-0061 $385.00 4309-0081 $325.00

3 cm Ogee F 3 cm 4304-0096 $352.00 4304-0101 $308.00

3/4” R Convex L --- 4313-0166 $282.00 4313-0177 $258.00

45° Bevel x 1/4” E --- 4312-0018 $208.00 4312-0025 $192.0045° Bevel x 1/2” E --- 4312-0019 $250.00 4312-0026 $192.00

Drainboard tool --- --- 4302-0175 $493.00 1910-0026 $420.00

Half B

ullnose w/ bottom

bearing w

/ bottom bearing

Description Item # Price Item # Price1/2” Dia x 1 1/2” lg.

Blunt end router 1916-0005 $57.00 1916-0009 $52.001/2” Dia x 1 1/2” lg. Sphere end router 1916-0006 $59.00 1916-0010 $54.001/2” Dia x 1 1/2” lg.

Blunt end router w/slot 1916-0007 $70.00 1916-0011 $62.00

3/8” R x 1 3/4” Ø Half Bullnose 4309-0086 $128.00 4309-0093 $119.002 cm R x 2 1/4” Ø Half Bullnose 4309-0089 $167.00 4309-0096 $140.00

3/16” R x 1 3/4” Ø 4309-0048 $125.00 4309-0098 $127.001/4” R x 1 3/4” Ø 4309-0049 $130.00 4309-0099 $122.003/8” R x 1 3/4” Ø 4309-0050 $142.00 4309-0100 $140.00

1/2” R x 2” Ø 4309-0051 $157.00 4309-0101 $152.005/8” R x 2” Ø 4309-0052 $173.00 4309-0102 $168.003 cm R x 3” Ø 4309-0054 $269.00 4309-0104 $237.00

45° Bevel, 1/4” x 1 3/4” Ø 4312-0028 $117.00 4312-0032 $105.00

2 cm x 2 1/2” Ø Ogee w/ bottom bearing 4304-0090 $232.00 4304-0107 $217.00

45° Bevel, 1/4” x 1 1/4” bottom bearing 4312-0014 $114.00 4312-0035 $110.0045° Bevel, 3/4” x 1 1/4” bottom bearing 4312-0015 $150.00 4312-0036 $142.00

Half B

ullnose w/ bottom

bearing w

/ bottom bearing

no bearing


Routers &

Profiles

46

46

rOuTErs & PrOfIlErs

These Profilers are designed to produce everything from roundovers to vertical grinding on granite, engineered stone, and porcelain tile and slab. The nylon guide slides along the surface and the rotary toucher controls the depth of the cut to make this tool nearly “goof-proof”. 3,500 max, RPM. 5/8”-11 thread.

Profiler Wheels

Shape Size Item # PriceB 3/16” Roundover 4315-0003 $125.73 B 3/8” Roundover 4315-0001 $125.73 B 1/2” Roundover 4315-0013 $146.89B 3/4” Roundover 4315-0002 $157.33 E 1” Holl. Bevel 4315-0015 $207.32

F Pos.0 3/4/ Ogee 4315-0016 $281.28F Pos.1 3/4” Ogee 4315-0014 $292.86F Pos.0 1-1/4” Ogee 4304-0114 $301.61F Pos.1 1-1/4” Ogee 4304-0115 $319.58

Q 1/4” Recessed 4315-0017 $174.48RE 3/8” Int. Bevel 4315-0012 $170.62V 1-1/4” Full Bull 4310-0101 $345.42V 1-1/2” Full Bull 4310-0197 $416.55Z 1-1/4” Vert. Grind 4315-0011 $213.64Z 1-1/2” Vert. Grind 4315-0018 $272.86

Diamond Stone Profilers

• Fast stock removal • 5/8”-11 female thread for angle grinders

COARSE

These cost effective stone profilers are made to work aggressively.

Shape Item # Size PriceA 1912-0060 3/16” R $99.00A 1912-0061 3/8” R $99.00A 1912-0062 1/2” R $109.00

A20 1912-0181 10mm R $99.00A30 1912-0182 15mm R $129.00A40 1912-0183 20mm R $159.00B20 1912-0055 3/4” Half Bullnose $129.00B30 1912-0185 1-1/4” Half Bullnose $199.00E20 1912-0186 3/16” Bevel $139.00E30 1912-0187 3/8” Bevel $219.00F20 1912-0056 3/4” Ogee $129.00F30 1912-0189 1-1/4” Ogee $199.00H30 1912-0190 Dupont $159.00L20 1912-0191 Cove $99.00T20 1912-0192 Radius top Bottom $99.00T30 1912-0193 Radius top Bottom $119.00V20 1912-0057 3/4” Full Bullnose $109.00V30 1912-0058 1-1/4” Full Bullnose $149.00V40 1912-0196 1-1/2” Bullnose $199.00X30 1912-0197 Eased $129.00


This wheel is designed for grinding inside radius applications such as: birdbaths, bowl holes, and other concave surfaces. 5/8”-11 female thread.

4” premium diamond cup wheel with lightweight aluminum backer and 5/8”-11 female thread

5/8”-11 thread

4” Curved-Tapered Diamond Turbo Wheel - Aluminum

4” Grinding Wheel - Aluminum

4” Turbo Style and 4” DS Shaping Wheel

Grit Item # PriceFine 1903-0117 $69.00

Medium 1903-0116 $69.00Coarse 1903-0114 $69.00

Extra Coarse 1903-0115 $89.00

Size Type Item # Price4” Coarse Turbo 1906-0108 $136.994” Medium Turbo 1906-0068 $127.824” Coarse DS Shape 1906-0140 $110.56

1903-0297 $115.00

Item # 4” Price1903-0304 Fine $79.951903-0302 Medium $79.951903-0303 Coarse $79.95

Cyclone Flat Resin Cup Wheels

The first ever flat resin cup wheel with 12 diamond filled segments.

Perfectly balanced for smooth precision grinding.

5/8”-11 thread

Flat Diamond Shaping Wheels

Specially designed for chip-free grinding of stone edges.

5/8”-11 thread

Type 4” PriceFine 1903-0018 $86.50

Medium 1903-0015 $86.50Coarse 1903-0017 $86.50

Type 6” PriceFine 1903-0159 $141.75

Medium 1903-0024 $141.75Coarse 1903-0025 $141.75

Grinding Wheels

Balanced to eliminate vibration and chipping when shaping. 5/8”-11 (M18x2) Female thread. Aggressive design with thick turbo segments and diamonds

Size Type Item # Price4” Fine 1903-0308 $60.004” Medium 1903-0307 $60.004” Coarse 1903-0306 $60.005” Coarse 1903-0309 $82.006” Coarse 1903-0310 $103.007” Coarse 1903-0311 $115.00

47

Rou

ters

& P

rofil

es

47

grINDINg wHEEls


4.5” and 7” Diamond Discs

Vacuum Brazed DiamondGrinding Wheels

5/8”-11 Thread

These new Vacuum Brazed diamond discs resemble the infamous Zek discs from Italy in appearance and usage. However, the comparison ends with performance. These discs will far outlast hard silicone carbide discs and are just as aggressive.

• For use on angle grinders• Very cost effective• One of the fastest way to cut and grind stone!

Size Grit Item # Price4.5” 30 Grit 1905-0030 $33.254.5” 100 Grit 1905-0031 $32.007” 30 Grit 1905-0032 $60.00

5/8”-11 Adaptor 4308-0027 $15.40

Size Grit Item # Price4” Coarse 1921-0004 $64.004” Medium 1921-0005 $64.005” Coarse 1921-0006 $78.005” Medium 1921-0007 $78.00

V1 CUTTER Vacuum Brazed Diamond Grinding Wheels

Size Grit Item # Price4” 30/40 1903-0225 $125.464” 50/60 1903-0226 $125.465” 30/40 1903-0227 $136.375” 50/60 1903-0228 $136.37

• Extremely aggressive. • Can cut like a blade and shape like a cup wheel easily with a few passes.

Madein U.S.A.Made

in U.S.A.

Desc. Item # Price4” dia. 1905-0067 $230.005” dia. 1905-0068 $280.006” dia. 1905-0069 $290.00

Blue Diamond Coarse DiamondElectroplated Disks

with 5/8” threaded connection

Madein U.S.A.Made

in U.S.A.

Blue DiamondDrums & Grinding wheels

with 5/8” threaded connection

Description Item # Price Item # Price5/8 Ø x 1 1/2” Wide Finger w/ center water 1919-0106 $98.00 1919-0124 $92.00

1 1/2” Ø x 1 1/2” Wide Drum 1919-0107 $107.00 1919-0125 $98.001 1/2” Ø x 2” Wide Drum 1919-0108 $143.00 1919-0126 $117.00

2” Ø x 2” Wide Drum 1919-0109 $178.00 1919-0127 $122.002 1/2 Ø x 1 1/2” Wide Drum 1919-0110 $158.00 1919-0128 $130.002 1/2 Ø x 2 1/2” Wide Drum 1919-0111 $210.00 1919-0129 $148.00

3” Ø x 1 1/2” Wide Drum 1919-0112 $225.00 1919-0130 $142.003” Ø x 2” Wide Drum 1919-0113 $250.00 1919-0131 $183.00

3” Ø x 1 1/2” Wide Lightweight Drum w/ center water 1919-0114 $280.00 1919-0132 $210.003” Ø x 2” Wide Lightweight Drum w/ center water 1919-0115 $392.00 1919-0133 $335.00

30/40 Grit 50/60 Grit

Ghines Connection

5/8” Ø x 1 5/8” 2 piece Drum Z 4 cm max 4313-0121 $185.00 4313-0178 $177.00

2” Ø x 2” Drum Z 5 cm max 4313-0124 $233.00 4313-0181 $208.003” Ø x 1 1/2” Drum Z 3.8 cm max 4313-0126 $308.00 4313-0183 $258.00

1 1/2 Ø x 2” drum Z 5 cm max 4313-0129 $220.00 4313-0169 $210.002” Ø x 2” drum Z 5 cm max 1919-0099 $278.00 4313-0170 $242.00

w/ bottom

or top bearing

Routers &

Profiles

48

48

grINDINg wHEEls


The fastest way to remove material after cutting out sink holes with a diamond blade, or to shape a radius on the outside edge.

Resin diamond fills in the area between the metal bond diamond. The result is fast stock removal for sink clean-up and radius work that is chip-free!!

with center water

Zero Tolerance Wheelswith 5/8”-11 thread and internal water holes

With top bearing and

5/8”-11 thread.

with center water

Brazed DiamondDrum Clean-Up Wheels

Resin Filled ZeroTolerance Wheels

with center water5/8”-11

female thread

Wet Profile Wheel - Z-30

Wet profile wheel for vertical grinding. Max RPM usage: 3,500. Maintains an aggressive cutting performance and its original shape for a long time.

5/8”-11 female thread - with center water

Size Item # Price2” x 1-3/8” 1919-0100 $85.003” x 1-3/8” 1919-0101 $124.004” x 1-3/8” 1919-0102 $130.00

Size Grit Item # Price2 x 2” #30 1919-0172 $115.002 x 2” #100 1919-0173 $115.003 x 2” #30 1919-0174 $170.003 x 2” #100 1919-0175 $170.00

Size Coarse Price2” x 1-5/8” 1919-0142 $79.003” x 1-5/8” 1919-0143 $99.004” x 1-5/8” 1919-0141 $119.00

4315-0011 $213.64

Blue Diamond Coarse Segmented Drumswith 5/8” threaded connection

Madein U.S.A.Made

in U.S.A.

Description Item # Price2” dia. x 1 1/2” Wide Drum 1919-0120 $159.003” dia. x 1 1/2” Wide Drum 1919-0121 $232.00

3” dia. x 1 1/2” Wide Lightweight Drum w/ center water 1919-0122 $269.00

3” dia. x 3” Wide Lightweight Drum w/ center water 1919-0123 $310.00

Size Item # Price1” x 1.57” 1107-0394 $69.00

Zero Tolerance Finger Bitwith 5/8”-11 thread and internal water holes

The fastest way to remove material after cutting out sink holes with a diamond blade, or to shape a radius on the outside edge.

49

Rou

ters

& P

rofil

es

49

Drum wHEEls


Edge polishing for sink cut-outs.Recommended use: oscillate up and down for proper drum wear.

Oscillating Drum Wheel System

Type Grit Item # Price2 x 2” Metal #30 1919-0172 $115.002 x 2” Metal #100 1919-0081 $115.00

Resin #50 1920-0038 $89.00 Resin #100 1920-0039 $89.00 Resin #200 1920-0031 $89.00 Resin #400 1920-0032 $89.00 Resin #800 1920-0033 $89.00 Resin #1500 1920-0034 $89.00 Resin #3000 1920-0035 $89.00

Final Buff Buff 1920-0036 $89.00 Set: 50-3000 6001-0092 $623.00

• 5/8”-11 female thread • with center water

Polishing Drum Wheels

5/8”-11female thread

Use wet or dry!

*Metals do not oscillate

Use wet or dry!

Grit 2” x 2” Price50 1919-0163 $21.95

100 1919-0164 $21.95200 1919-0165 $21.95400 1919-0166 $21.95800 1919-0167 $21.95

1500 1919-0168 $21.953000 1919-0169 $21.95Black 1919-0170 $27.95White 1919-0171 $27.95

Set: 50-3000 6001-0409 $153.65

Oscillating Head

4108-0024 $ 199.50

Diamond grinding and polishing cylinders for professional edge processing wet application in connection with the GALESKI edge processing system Contour Cat 80 or the Natural Stone Processing Unit GALAXY 3000. The drums use electroplate or resin based with the oscillating head “RS” resulting in scratch-free and exact angular polishing of edges.

GaleskiOscillating Head

Contour Cat KS-80Page 36

Oscillating HeadDrum Wheel System

5/8”

-11

fem

ale

thre

ad

Type Grit Item # PriceElectroplate #50 4108-0006 $587.69Electroplate #100 4108-0007 $509.23

Resin #200 1920-0021 $189.85Resin #400 1920-0022 $189.85Resin #800 1920-0023 $189.85Resin #1500 1920-0024 $189.85Resin #3000 1920-0025 $189.85

Final Buff Buff 1920-0026 $189.85Set: 50-3000 6001-0091 $2,236.00

4108-0005 $459.00

X-TREME JR.Page 36

Routers &

Profiles

50

50

Drum wHEEls


GFCIpage 73

GFCI Included

51

Por

tabl

e S

tone

Saw

s

51

POrTablE sTONE saws

AWS-110 - 4” Wet Stone Cutter

Specifications:• Volts: 110V/60 Hz• Power: 1200W, 10.9 Amp• Speed: 13,000 RPM• Blade Size: 4”/110mmMax. cutting depth: 1-1/4”• Arbor Size: 20mm• Weight: 6.8 lbs.

4101RH 5”Masonry Saw

5005BA 5-1/2”Circular Saw

Specifications:• Blade diameter: 5” • Arbor: 3/4” • Max. cutting cap. at 90°: 1-3/8” • Max. cutting cap. at 45°: 13/16” • No load speed: 12,000 RPM • Watts out: 1,050 • 8 Amps, 120V

Specifications:• Blade diameter: 5-1/2” • Arbor: 5/8” • Max. cutting cap. at 90°: 1-3/4” • Max. cutting cap. at 45°: 1-3/16” • No load speed: 8,000 RPM • Watts out: 1,050 • 8 Amps, 120V

180 Day Limited Warranty

AWS-125 - 5” Wet Stone Cutter

Specifications:Power: 110VNormal power: 1200W, 11.2 AmpNo-load speed: 12,000 RPMCutting disk diameter: 5”Arbor: 7/8”/22mmMax. cutting depth: 1-5/8”Weight: 7.2 lbs

4903-0001 $193.09

5477NB 7-1/4” Hypoid Saw

Warning:Use a Ground fault

Interrupter if using with water to prevent electrical shock.

Blade Diameter: 7-1/4”Max. Cut - 90°: 2-3/8”Max. Cut - 45°: 1-3/4” Max. Cut - 50°: 1-9/16”

Optional WaterFeed Kit

Skil® HD5860 8-1/4” Saw

• 22-amp switch and heavy gauge cord• Die-cast aluminum motor and gear housings• Exclusive 60° bevel feature with 8-1/4” blade• High Torque 13 Amp Motor• Oil indicator level and relief bellows for long life• Precision-machined, durable worm drive gears• Cutting depth: 2-7/8”, 5/8” Arbor

AWS Carriage Assembly

4903-0017 $88.00

Rails4ft. Rail 4914-0040 $133.847ft. Rail 4914-0042 $189.33

12ft. Rail 4914-0044 $284.49

DEAL Rail Kit Combo, 4ft, 7ft, and 12ft 4914-0005 $594.25

Arbor: 5/8”

No Load Speed: 4,500 RPM15 Amps (120V)

Guide Rails

Three connectors

BaseSpecial bases can be

made for any size saw!

IncludesClamps

4903-0002 $122.89


4911-0038 $339.00 4903-0013 $259.001 Year Limited

Warranty1 Year Limited

Warranty

4915-0005 $289.00

Without Waterfeed 4903-0023 $179.00With Waterfeed 6001-0145 $235.65



4903-0006 $56.65

with electric brake

50” 4914-0266 $99.9570” 4914-0265 $149.95 4914-0267 $49.95

4914-0264 $49.95


Limited time offerFREE blade included

$279.95

$79.00

$169.00

9564CV 4.5” Angle Grinder

$165.00

Water Adapt. & Hose Assy. Page 72

Grinders &

Polishers

52

52

grINDErs & POlIsHErsmakITa®

• GFI Protected• Speed: 2,000 - 4,000 RPM • 120 Volts, 7.9 Amps • Spindle Thread: 5/8 - 11”

PW5001C 4” Variable Speed Wet Stone Polisher

• Overall Length: 12-1/4” • Net Weight: 4.6 lbs.


9565CV 5” Variable Speed Angle Grinder

Includes: 5” grinding wheel, side handle, wheel guard, inner flange, lock nut, & wrench.

• Grinding Wheel: 5”• Wire Cup Brush: 3”• Sanding Disc: 5”• 2,800-10,500 RPM1 Year Limited

Warranty

Includes: Head cover, & wrench

Super Joint System (SJS) helps prevent gear damage

• 120 Volts, 12 Amps• Spindle Thread: 5/8”-11• Overall Length: 11-3/4”• Net Weight: 4.0 lbs.

9557NBX 4.5” Angle Grinder

• No Load Speed: 11,000 RPM • 120 Volts, 7.5 Amps • Spindle Thread: 5/8”-11• Length: 10-5/8” • Net Weight: 3.5 lbs.


Includes: 4-1/2’’ grinding wheel, wheel guard, lock nut, lock nut wrench, side handle, & inner flange

• Grinding Wheel: 4.5”• Wire Cup Brush: 3”• Sanding Disc: 4.5”• 2,800-10,500 RPM

• 120 Volts, 12 Amps• Spindle Thread: 5/8”-11• Overall Length: 11-3/4”• Net Weight: 4.0 lbs.1 Year Limited

Warranty

1909-0079 $279.953904-0055 $11.25Carbon Brush

SET

1909-0108 $169.003904-0055 $11.25Carbon Brush

SET

1909-0123 $79.00

1909-0179 $165.00


GA7011C 7” Angle Grinder

$215.00

$179.00

$210.00

53

Grin

ders

& P

olis

hers

53

grINDErs & POlIsHErs

GA9020 9” Angle Grinder

Includes: 9” Grinding wheel, side handle, wheel guard, inner flange, lock nut, lock nut wrench

• 6,000 RPM• Labyrinth construction seal• Grinding wheel: 9” • Wire cup brush: 6” • Sanding disc: 7”


• 120 Volts, 15 Amps • Spindle thread: 5/8” - 11• Overall length: 18-5/8” • Net weight: 10.4 lbs.

• Spindle Thread (11 UNC) 5/8” • Length - 17-7/8” • Net Weight (lbs.) - 7.5

• Grinding Wheel - 7” • Sanding Disc - 7” • No Load RPM 6,000 • AMPS 15.0

1909-0154 $210.001918-0070 $21.78

L1503VR 5” Polisher/Grinder

Powerful 10 Amp, 120V angle grinder/polisher specially designed for work on soft natural stone and sensitive metal surfaces. When plastic grinder head cover is removed, tool is able to reach into the tightest areas. Variable speed from 1,200 - 3,200 RPM.

1 Year LimitedWarranty 5/8”-11 threaded spindle

9227C 7” Polisher/Sander


• Sanding Disc 7" • Wool Bonnet 7" • No Load RPM 600-3,000 • 120 Volts, 10 Amps

Includes: Hook-and-loop pad, hex wrench, hoop handle, & side handle

• Spindle Thread: 5/8”-11• Overall Length: 18-1/2" • Net Weight: 6.6 lbs.

$229.00

makITa®/flEX®

3905-0021 $215.001918-0018 $5.94

1909-0017 $229.001918-0097 $10.50

1909-0152 $179.00

Carbon BrushSET

Carbon Brush

Carbon BrushSET


LW 1703 S Wet Stone Grinder

$310.00

$397.00

$249.00

$329.00

Grinders &

Polishers

54

54

grINDErs & POlIsHErsflEX®

This lightweight high speed wet grinder is the ideal tool when using metal-bond diamond: cup wheels, discs and router bits, for fast stock removal. With center waterfeed, ground fault interrupter, and splash guard.

LW1509 4.5” High Speed Wet Angle Grinder

• Motor: 120V, 7.1 Amps• Speed: 8,300 RPM• Weight: 4.8 lbs.

1 Year LimitedWarranty 5/8”-11 threaded spindle

LW1503 5” Angle Polisher

5/8”-11 threaded spindle

Lightweight, yet very powerful. Known for its durability. 3,700 RPM, 5” disc capacity, 120V-7.8 Amps, Weight: 4.4 lbs., comes with wrench and built in Ground Fault Interrupter.


LW603VR 5” Variable Speed Angle Polisher


Heavy duty and very powerful. Great for both diamond and silicon carbide wheels. 120V - 13 Amps. Weighs 7.5 lbs. Variable speed from 1,000 - 2,800 RPM. Comes with wrench and built in Ground Fault Interrupter.1 Year Limited

Warranty

• Motor: 120V, 7.9 Amps• Speed: 3,500 RPM• Weight: 5.5 lbs.

Lightweight and easy-to-use with powerful 950 Watts and especially sturdy gears for high torque. Ergonomic shaped grip for safe handling. The GFCI circuit breaker is integrated into the power cord, for optimal flexibility even under mobile use without isolation transformer. Caution: For safety reasons, this unit should be operated only in conjunction with the GFCI operator protection circuit breaker!

1909-0041 $329.001918-0018 $5.94Carbon Brush

1909-0019 $249.001918-0018 $5.94Carbon Brush

1909-0028 $397.0099-765-0104 $5.55Carbon Brush


1909-0164 $310.00


L3709 5” Angle Grinder

$199.00

$169.00

$189.00

$99.00

$59.951

2buy

55

Grin

ders

& P

olis

hers

55


Known for its German designed durability. 5” Heavy duty. 120V - 11 Amps. 10,000 RPM. Weighs 4.25 lbs.

L1509FR 5” Angle Grinder

L3410VRG 5” Variable Speed Angle Grinder





Powerful 120V/10 Amp, variable speed from 3,000-11,000 RPM. Very ergonomic design, and comes with a handle wrench. The flat aluminum die cast gear head allows the tool to reach into the tightest areas.

5” Heavy duty 120V/11 Amp motor with overload protection and soft start. Variable speed from 2,200 - 6,800 RPM. Weighs 4.2 lbs.

L1506VR 5” Angle Grinder

5/8”-11 threaded spindle1 Year LimitedWarranty

5” Heavy duty. 120V - 7 Amps. 11,000 RPM. Weighs 4.2 lbs.



buy 10 blades

of choice, get a

frEE flex grinder

flEX®

1909-0084 $169.0099-765-0057 $10.50

1909-0040 $185.001918-0018 $5.94

Carbon Brush

Carbon Brush

1909-0013 $199.001918-0018 $ 5.94Carbon Brush

1909-0178 $59.95

*while supplies last


$269.00

$179.00

call for

pricing!

call for

pricing!

Grinders &

Polishers

56

56

grINDErs & POlIsHErsalPHa®/mETabO®

Included Equipment:• Heavy duty carrying case• Ground Fault Circuit Interrupter• Water valve and hose• Faucet/garden hose adaptor• Wrench• C-Handle• Reversible side handle• Rubber coated electronics• Extra carbon brush set• Caster assembly

The Alpha® AWP-158 Electric Polisher is designed for portable polishing, shaping and light grinding. A center water feed permits wet polishing which helps to reduce dust, extend disc life and gives you a great polish. For your safety, the unit is double insulated and has an installed Ground Fault Circuit Interrupter.

Motor: 110V/7.8 AmpsSpeed: 3,000 RPMWeight: 6 lbs.Spindle: 5/8”-11

AWP-158 5” Electric Polisher180 Day Limited

Warranty

VSP-120 5” Variable Speed Electric Polisher

Motor: 120V, 7 AmpsSpeed: 500-2,800 RPMWeight: 7.3 lbs.Spindle: 5/8”-11

Carbon BrushSET

The VSP-120 comes with variable speed control switch with an automatic speed feed-back system to maintain consistent RPMs with or without a load. This switch has also expanded the usable RPM range from 500 RPM to 2,800 RPM. The new RPM range reduces heat build-up when polishing Engineered Stone, which eliminates burning or scorching the work piece. Alpha® has also added a Splash Guard that can be trimmed to adjust the height for the best comfort and protection. Every stone fabricator should try the new VSP-120 variable speed wet polisher to achieve the best performance and high quality results.


WE14-125 VS Electric Angle Grinder

• 120V Volt• No Load Speed: 3,000 - 10,000 RPM • Grinding disc diameter: 5” • Rated input: 1,400 Watts • Power: 12 Amps• Tool weight: 5.5lbs.• Spindle: 5/8”-11

Variable Speed


The WE 14-125 VS offers a long lasting motor, vario constamatic (full wave electronics), quick wheel change system, and auto-stop carbon brushes.

PE12-175 7” Angle Polisher

• 5/8”-11 threaded arbor• Pad diameter: 7”• Extremely high torque: 124 inch lbs.• No-load speed: 700-2,200 RPM• Power: 10 Amps, 120V• Spindle thread: 5/8”-11• Tool weight: 5.9 lbs.


The PE12-175 offers a ergonomic front flap for optimum machine control, vario constamatic (full wave electronics), and auto-stop carbon brushes.

Variable Speed

1909-0052

99-030-0177 $8.25Carbon Brush

SET

1909-0161

99-030-0227 $10.00

1909-0151 $179.00

3905-0014 $269.00


$145.00

$289.00

call for

pricing!

57

Grin

ders

& P

olis

hers

57

$249.99


This lightweight, versatile, pneumatic water polisher is used to polish marble, granite, and concrete. Small enough to polish tight curved corners and sink cut-outs. Features: high performance bearings, dispersed center waterfeed to cover the whole polishing area, and air control valve for variable speed up to 4,500 RPM.

BEST TOOL IN ITS CLASS, AT THE BEST

PRICE !• Air Usage: 16 CFM at 90 PSI• Speed: 4,500 RPM• 4” Grinding Wheel Size• Spindle: 5/8”-11• Net Weight: 3.3 lbs

Brass Air Coupler1/4” Female Water Conn.

S-9 Pneumatic Water Polisher

Specifications:• Air Consumption: 16 CFM• Air Pressure: 85-95 PSI• Speed: 2,500 RPM• Weight: 2.64 lbs.• Spindle: 5/8”-11• Air Inlet: 1/4” NPT

Equipment Included:• Air lead hose - 10 feet • Exhaust Muffler • Side handle (reversible) • Hose adapter • Water valve with hose • Wrenches / Splash Guard

High performance polisher built for continuous operation. Durable rubber coated body and insulated parts keep hands from getting cold. Has center waterfeed for dust free polishing.

AIR-658 Pneumatic Polisher


PLW 923S 4” Air Stone Sander/Polisher The compact, lightweight design gets into tight spaces with ease, and allows for all-day use with less operator fatigue. The PLW 923 S Air Stone Sander/Polisher features a central water feed with rear exhaust. and accepts 3”, 4” or 5” discs. It comes with a 4” Velcro® pad, bail handle, side handle, wrenches, hoses for air, water and exhaust along with appropriate fittings.


Includes: side handle, water hose, oil, wrench, and backer head.

Improved body & Head Design!

GCT

aIr POwErED

Specifications:• Spindle Size: 5/8”-11• Max. Speed: 3,600 RPM• Weight: 2.8 lbs.• Length: 9-1/2”• Air Consumption: 15.19 CFM• Air Inlet: 1/4”• Hose Size: 1/4”• Air Pressure: 90 PSI

1909-0071 $139.00

2707-0133 $3.852707-0134 $1.60

3905-0018

3905-0030 $249.99

Specifications:• Air Pressure: 90 PSI • RPM: 250 to 5,500 • Shaft Thread: 5/8”-11 • Air Inlet: 1/4” NPT • Output: 320W • Length: 10-1/4 in. • Air Consumption: 16 CFM• Max. Disc Size: 5” • Weight: 4 lbs.

Equipment Included:• 25’ Water hose• 5’ Air hose• 3’ Air/water hose protector• D-handle• Oil• Wrenches

BARRANCA - BD-2321 Rear Exhaust Wet Air Polishing Tool90 Day Limited

Warranty

One of the only Air Grinders on the market

with a Full Year Warranty!

1909-0150 $289.00

90 Day LimitedWarranty


$1,889

Ecogrinder

1909-0138 $375.06

Rating: 110/ VoltsAmperage: 110.25Power: 1050WNo-load Speed (min-1): 8,700 RPMWeight: 12.7 lbsArbor: 7/8” / 22.3mmWheel Size: 5”/125mm

The Alpha® Ecogrinder is the ideal high performance grinder with a built-in vacuum system. The Alpha® Ecogrinder ensures a virtually dust free environment without the use of an external vacuum system or expensive dust collector. Its unique slide cover allows the Ecogrinder grinding wheel to grind up to the wall. Opening the slide cover exposes the diamond cutting edge without reducing the vacuum effect.

$375.06

Brazed Hard Diamond Discs

These diamond pads are the best for fast stock removal, as the diamonds are exposed and brazed coated. They are rigid and the edges are tapered for flat polishing and lippage removal. The 5” sizes are ideal for countertop polishing with the DS301 Machine.

Q.R.S connection

3” #60 1806-0472 $35.753” #120 1806-0473 $35.753” #220 1806-0474 $35.754” #60 1806-0247 $42.454” #120 1806-0246 $42.454” #220 1806-0471 $42.455” #30 1806-0028 $55.005” #60 1806-0371 $55.005” #120 1806-0248 $51.855” #220 1806-0370 $51.85

Grinders &

Polishers

58

58



DS-301 Planetary Polisher

Voltage: 120V, 60HzCurrent: 10.5 AmpsDriver Speed: 900 to 2,700 RPMPlatform Speed: 150 to 450 RPMPlaten Speed: 750 to 2,250 RPMPlaten Size: 5”Tool Weight: 30 lbs.5/8”-11 spindles (3)

Will produce a FLAT, SWIRL-FREE FINISH on monument work, countertops, floors, walls and steps using coated abrasives, diamond polishing discs or diamond cup wheels.

SAND ♦ GRIND ♦ HONE ♦ POLISH

Dust Cowl

99-450-0001 $195.00

3905-0008 $1,889.0099-450-0018 $49.00

Slurry Skirt


Heavy-duty three-speed core drill that has a built-in waterfeed through the gear head. The 120V powerful, 11 Amp motor can take diamond core bits up to 3-1/4” diameter. Comes with BD-05 Drill Stand and water collector. Also with GFI

State-of-the-art design enables you to drill in tight places such as sink backs and staircases. This very sturdy base is held down by three suction cups and has an adjustable foot plate for added strength. Comes with water collector to eliminate messes on the job. Use with Flex motor, or adjustable collar. Will fit most 1/2” drills.

BED-55 Core Drill BD-05 Core Drill Stand1 Year Limited

Warranty1 Year Limited

Warranty

Speed under load: First gear: 350-1,100 RPMSecond gear: 800-2,300 RPMThird gear: 1,600-4,600 RPM

1106-0002 $1,599.00

1101-0006 $595.00

59

Dril

ls

59

DrIlls

HP2070F 3/4” Hammer Drill

• 2-Mode switch delivers hammering with rotation and rotation only• Large trigger switch and 360° swivel side handle for added comfort • Ball bearing construction for longer motor life • Ergonomic and well balanced design with rubberized grip for comfort and control reducing operator fatigue

No load speed RPM Low 0 - 1,200 High 0 - 2,900Blows per minute Low 0 - 24,000 High 0 - 58,000AMPS: 8.2, VOLTS: 120Chuck Size: 5/8”


BE 710 1/2” Drill

• Torque: 142 in-lbs/53 in-lbs • No load speed: 0 - 1000 / 0 - 3000 /min • Rated current: 5.8 A • Rated input power: 710 W • Output power: 420 W • Rated load speed: 560/1700 /min • Collar diameter: 1 3/4 “ • Drilling spindle thread: 1/2” - 20 UNF • Chuck capacity: 1/16 - 1/2 “ • Drilling spindle with hexagon recess: 1/4” (6.35 mm) • Weight (without mains cable): 4.9 lbs

1505-0011 $179.00

1506-0006 $149.00



Diam

ond Blades

60

60

DIamOND blaDEsrIval

Rival Sandwich SegmentedDiamond Blades

Rival Sequence Applied20mm Seg. Diamond Blades

Rival Sequence Applied25mm Seg. Diamond Blades

Size Item # Price12” 0508-0688 $199.0014” 0508-0651 $229.0016” 0508-0652 $279.0018” 0508-0653 $309.00

Size Item # Price14” 0508-0654 $219.0016” 0508-0655 $259.0018” 0508-0686 $289.00

Size Item # Price12” 0508-0689 $209.0014” 0508-0690 $269.0016” 0508-0691 $319.0018” 0508-0692 $379.00

Sequence Applied Diamond Technology provides the perfect balance between blade life and performance. Diamond Placement ensures exposure and maximum cutting speed, thus giving the sawyer a perfect blend of speed and consistency.


Madein U.S.A.Made

in U.S.A.

61

Dia

mon

d B

lade

s

61

DIamOND blaDEs

for granite and marble

Blue Diamond - SLASHERSilent Core Segmented Blades

Granite City Tool can ReTip most BLUE DIAMOND Blades in 3-10 Days!

Re-Tip andSave Money!Use wet only

10mmsegments.

Diam. Arbor Item # Price12” 50/60 mm 0508-0638 $215.0014” 50/60 mm 0508-0632 $249.0016” 50/60 mm 0508-0633 $299.0018” 50/60 mm 0508-0640 $319.00

18mm Seg.

ZENESIS® Silent CorePatterned Segmented Blades

Remarkable life!Patented diamond placement technology.

Diam. Arbor Item # Price12” 50/60 mm 0508-0639 $229.0014” 50/60 mm 0508-0648 $279.0016” 50/60 mm 0508-0637 $329.0018” 50/60 mm 0508-0636 $409.00

25mm Seg.

ZENESIS® II Silent CorePatterned Segmented Blades

Remarkable life!Patented diamond placement technology.

Diam. Thickness Arbor Core Item # Price6” 2.5 mm 5/8” Solid 0508-0488 $112.008” 2.5 mm 5/8” Solid 0508-0489 $143.00

12” 3.5 mm 50 mm Silent 0508-0533 $230.7714” 3.5 mm 50 mm Silent 0508-0485 $248.0014” 3.5 mm 60 mm Silent 0508-0490 $248.0016” 3.5 mm 60 mm Silent 0508-0491 $282.0018” 4 mm 50 mm Silent 0508-0478 $342.0018” 4 mm 60 mm Silent 0508-0487 $342.0018” 4 mm 4.415” Solid 0508-0492 $357.0024” 4 mm 4.415” Solid 0508-0493 $567.00


Madein U.S.A.Made

in U.S.A.

Blue Diamond Silent Core Milling Wheels

1-1/2” thick

For bridge saws and milling machines.

Size Type Item # Price13.75” Soft 4317-0005 $999.00

14” Hard 4317-0004 $1,038.0013.75” Soft 4317-0006 $1,232.00

Soft

Diam

ond Blades

62

62

DIamOND blaDEs

15mm Tall Segments

Use wet only

Works good on low horsepower saws.

AURORA Series S-Segmented Silent Core Blades

Testing results have shown the S-Segment blades cutting up to 16ft/min in 3cm (1-1/4”) engineered stone and granite in a single pass. Designed for granite and engineered stone.

Size Seg. Arbor Item # Price14” 15mm S Seg 50mm/60mm 0508-0583 $ 199.00 16” 15mm S Seg 50mm/60mm 0508-0584 $ 239.00

Milling Wheel for Bridge Saws

• Teflon center core• 40mm (1 1/2”)T• 60mm Arbor

Diam. Arbor Item # Price14” 60mm 4317-0009 $699.00

Power Rim Cutter

Diam. Arbor Item # Price14” 50mm/60mm 0508-0552 $185.00

Power rim cutter is a high quality blade. Used for smoother cutting.

Used for chip free cutting on bridge saws, rail saws, and masonry saws!


63

Dia

mon

d B

lade

s

63

DIamOND blaDEs

Size Item # Price4” 0508-0670 $19.95

4.5” 0508-0671 $20.955” 0508-0672 $23.956” 0508-0673 $31.957” 0508-0674 $41.958” 0508-0675 $44.95

Size Item # Price4” 0508-0666 $24.95

4.5” 0508-0667 $28.955” 0508-0619 $32.956” 0508-0668 $43.957” 0508-0669 $58.958” 0508-0609 $61.95

Size Item # Price4.5” 0508-0676 $14.955” 0508-0677 $16.956” 0508-0678 $26.95

Economy Line. Economically priced and the best performing turbo blade in its class A return ratio of less than 1% making it the safest and most reliable diamond blade on the market.

Premium Line. Engineered to be the fastest cutting turbo blade in the industry. Extremely clean and sharp precision cuts. Return ratio of less than 1%. This diamond blade will never let you down. Proven in independent laboratory tests to be the fastest and longest lasting blade in the world.

Super Economy Line. Our new Storm line of turbo blades are designed to perform better than the low cost competitors. You won’t get as much life or speed out of them as our Cyclone or Hurricane blades, but where cost is the main factor, they will get you by in a pinch.

Storm Granite TurboDiamond Blades

Hurricane Granite TurboDiamond Blades

Cyclone Granite TurboDiamond Blades

DIamaX

Arbor Chart4” to 6”

5/8”- 20mm- 7/8”- 4 Hole

7” to 8”

5/8”- ◊- 7/8”


5/8”- 20mm- 7/8”- 4 Hole

7” to 8”

5/8”- ◊- 7/8”


5/8”- 20mm- 7/8”- 4 Hole

7” to 8”

5/8”- ◊- 7/8”


Diam

ond Blades

64

64

DIamOND blaDEsq4

The blade is designed for optimal performance in cutting granite, marble and hard stone. Close blade serration insures chip free - Extreme High Speed performance. Super High 10mm large segment height. 5/8 - 7/8 Arbor

• Premium diamond• 10mm kerf height!• Chip-free cuts!

Turbo Blades

Use wet or dry

Eagle Diamond Turbo Blades10MM Height - Premium

Fast cutting laser welded turbo blades designed for stone and tile.

Premium diamond blades at a competitive price. Use wet or dry

buy 10 blades

of choice, get a

frEE flex grinder


Size Item # Price4” 0508-0286 $19.95

4.5” 0508-0289 $24.955” 0508-0287 $29.956” 0508-0694 $39.95

7” ◊ 0508-0370 $54.958” ◊ 0508-0616 $59.95

Size Item # Price4” 0508-0423 $13.00

4.5” 0508-0424 $14.005” 0508-0425 $15.006” 0508-0426 $20.00

7” ◊ 0508-0427 $30.008” ◊ 0508-0428 $40.009” 0508-0429 $50.00

10” 0508-0430 $60.0012” 0508-0431 $70.00


5/8”- 20mm- 7/8”- 4 Hole

7” to 8”

5/8”- ◊- 7/8”

9” to 14”

20mm-7/8”-1”


5/8”- 20mm- 7/8”- 4 Hole

7” to 8”

5/8”- ◊- 7/8”

9” to 14”

20mm-7/8”-1”


Euro Turbo Blade

This blade is designed for fast cutting performance and extruded diamond sides to prevent binding in the cut. The diamond bond is universal for use on all stone, concrete and masonry.

Use wet or dry

Size Seg. Item # Price4” 100mm 0508-0038 $19.95

4.5” 115mm 0508-0039 $24.955” 125mm 0508-0040 $29.956” 150mm 0508-0065 $34.95

7” ◊ 180mm 0508-0066 $39.958” ◊ 200mm 0508-0067 $49.959” 220mm 0508-0067 $59.95

65

Dia

mon

d B

lade

s

65

DIamOND blaDEs

T-REX Diamond Blade

S A M U R A I DIAMOND BLADES

Great for curve cutting machines. Also the ideal blade for use with an angle grinder for cutting curved areas and light grinding. The T-segments protrude from both sides of the bladewhich helps prevent it from binding in the cut.

Laser welded Segments protrude out from the sides and some are longer then others which prevents binding, increases the cutting speed and provides a smooth cut.

Diamond VantageTornado Turbo

BladeSupreme performance in fast cutting of hard materials like stone and hard pavers. Extremely smooth, clean finish to the cut.

Use wet or dry

Use wet or dry

Use wet or dry

Works great with the Fab-Saw Jr.see Page 25

Size Item # Price4” 0508-0645 $24.00

4.5” 0508-0646 $26.25 5” 0508-0643 $29.95

7” ◊ 0508-0647 $44.00 8” ◊ 0508-0687 $49.6012” 0508-0696 $129.0014” 0508-0697 $149.00

buy 10 blades

of choice, get a

frEE flex grinder


5/8”- 20mm- 7/8”- 4 Hole

7” to 8”

5/8”- ◊- 7/8”

9” to 14”

20mm-7/8”-1”


5/8”- 20mm- 7/8”- 4 Hole

7” to 8”

5/8”- ◊- 7/8”

9” to 14”

20mm-7/8”-1”


Size Item # Price4.5” 0508-0316 $30.005” 0508-0317 $35.00

7” ◊ 0508-0318 $50.00

Size Item # Price4” 0508-0096 $19.95

4.5” 0508-0097 $24.955” 0508-0100 $29.956” 0508-0418 $34.95

7” ◊ 0508-0102 $39.958” ◊ 0508-0104 $49.959” 0508-0578 $69.95

10” 0508-0265 $79.9512” 0508-0266 $109.9514” 0508-0267 $119.95


5/8”- 20mm- 7/8”- 4 Hole

7” to 8”

5/8”- ◊- 7/8”

9” to 14”

20mm-7/8”-1”

Arbor Chart4.5” to 5”

5/8”- 20mm- 7/8”- 4 Hole

7”

5/8”- ◊- 7/8”- 4 Hole


Diam

ond Blades

66

66

DIamOND blaDEsalPHa®

• Advanced technology - cut through 1¼” material very fast with minimal chipping.• First in the industry - first blade designed specifically for use on slower than standard RPM saws.• Good cost performance - has a cutting life of more than 800 linear feet through 1¼” granite.

Knock-Out Blade

This blade is the ultimate dry cutting diamond blade for the professional tile contractor. Engineered to be the one blade you will need for cutting all materials, such as porcelain, granite, marble, engineered stone and glazed ceramic tile.

Katana Blade

Use wet or dry

Use wet only

Trim Master

Alpha® introduces the Trim Master, the first dry cutting blade designed for Sliding Miter Saws. This new dry cutting diamond blade is specifically designed to be used at high RPMs. This specialty blade is ideally suited for baseboard, back splash, end cap, mirror frames and any other molding applications.

Designed specifically to cut granite, marble, and porcelain quickly and efficiently. Advanced style rim reduces the risk of chipping and breaking while providing accurate and safe cuts. Fits most tub and tile saws.

Numero Uno Diamond Tile Blades

Use wet only Use wet or dry

Size Arbor Item # Price8” ◊ - 5/8” 0511-0008 $90.44

Size Arbor Item # Price4.5” 7/8” - 20mm 0508-0438 $41.095” 7/8” 0508-0439 $46.72

10” 5/8” 0508-0592 $120.67

Size Arbor RPM Item # Price6” 5/8” 6,000 0510-0001 $46.348” 5/8” 5,000 0510-0002 $71.81

10” 5/8” 3,450 0510-0003 $96.87


67

Dia

mon

d B

lade

s

67

DIamOND blaDEs

Considered to be among the finest diamond blades available in the stone industry. The Quad blades are drilled for the flush mount adapters, the Plus blades are not.

Use wet or dry

Professional Plus &Quad Turbo Blades

The Alpha® Libero diamond electroplated blade is designed to cut softer stone materials such as softer marbles, travertines, soapstones, and alabaster without chipping or cracking. The advanced electroplated bond out-performs any other blade in its class when cutting softer stones and marbles.

Libero Diamond Marble Blade

alPHa®

QUAD Blades Size Arbor Item # Price4” 20mm 0508-0002 $47.575” 20mm 0508-0009 $59.876” 20mm 0508-0012 $70.707” 20mm 0508-0014 $75.418” 20mm 0508-0018 $91.819” 20mm 0508-0023 $139.0311” 20mm 0508-0026 $156.37

PLUS Blades

Size Arbor Item # Price Size Arbor Item # Price4” 20mm - 5/8” 0508-0001 $45.68 8” ◊ - 5/8” 0508-0017 $88.01

4.5” 7/8” - 20mm - 5/8” 0508-0005 $50.19 9” 1” - 5/8” 0508-0022 $133.735” 7/8” - 20mm - 5/8” 0508-0008 $57.85 10” 5/8” 0508-0024 $153.136” ◊ - 5/8”- 1/2” 0508-0011 $68.55 12” 1” - 20mm 0508-0027 $192.417” ◊ - 5/8” 0508-0013 $72.80

Size Arbor Item # Price4” 20mm, 5/8” 0508-0003 $56.20

4.5” 7/8”, 20mm 0508-0007 $62.695” 7/8” 0508-0524 $75.527” ◊, 5/8” 0508-0016 $102.40


Size Item # Price4” 0508-0679 $41.50

4.5” 0508-0680 $43.505” 0508-0681 $47.506” 0508-0682 $58.50

7” ◊ 0508-0683 $65.50

Diam

ond Blades

68

68

DIamOND blaDEs

Diamond Continuous Rim Porcelain/Stone Blade

These Premium blades are designed to cut all types of stone and porcelain tiles.

Dry/Wet CuttingFast Cutting!

Super CycloneElectroplated Diamond

New production process extends life of blade. Comes with diamond side protection for extra clean cuts. New longer slot design increases cutting speed for super fast cuts.

Use wet onlySupreme design. Made to cut all types of stone and tile.

Diamond VantageContinuous Rim Tile Blades

Size Item # Price4” 0510-0103 $13.99

4.5” 0510-0104 $16.995” 0510-0105 $19.996” 0510-0106 $22.99

7” ◊ 0510-0107 $25.998” ◊ 0510-0108 $29.9910” 0510-0109 $40.9912” 0510-0110 $62.9914” 0510-0111 $98.99

Size Item # Price4” 0510-0094 $14.99

4.5” 0510-0095 $19.995” 0510-0096 $24.996” 0510-0097 $29.99

7” ◊ 0510-0098 $34.998” ◊ 0510-0099 $39.9910” 0510-0100 $49.9912” 0510-0101 $79.9914” 0510-0102 $109.99


5/8”- 20mm- 7/8”- 4 Hole

7” to 8”

5/8”- ◊- 7/8”

9” to 14”

20mm-7/8”-1”


5/8”- 20mm- 7/8”- 4 Hole

7” to 8”

5/8”- ◊- 7/8”

9” to 14”

20mm-7/8”-1”


5/8”- 20mm- 7/8”- 4 Hole

7” to 8”

5/8”- ◊- 7/8”

9” to 14”

20mm-7/8”-1”


These blades are used to cut out round and oval sink holes in countertops. This new design has segments which extend lower and protrude outward to prevent binding. Available in bonds to cut granite, engineered stone, marble, & porcelain.

Contour Diamond Blades


One of the easiest blades on the market for cutting out sink holes. Also great for shape cutting. 5” has diamond on both sides of core. 7” has diamond on outside of core.

Use Wet Only

Granite Contour BladesSize Arbor Item # Price4” 7/8” 0508-0019 $127.57

4.5” 7/8” 0508-0020 $125.025” 7/8” 0508-0021 $132.106” 7/8” 0508-0279 $169.74

Porcelain Contour BladeSize Arbor Item # Price

5” 7/8” 0510-0058 $132.85

Size Arbor Item # Price5” 7/8”-20mm-5/8” 0511-0029 $59.007” 7/8”-20mm-5/8” 0508-0320 $99.00


Size Arbor Item # Price5” 7/8” - 5/8” + 20.2mm 0508-0663 $104.955” 7/8” - 5/8” + 20.2mm 0508-0664 $79.955” 7/8” - 5/8” + 20.2mm 0508-0665 $99.95

Fastest way to make circular cut-outs The turbo-rim and two-sided dropped segments make the job faster than with any conventional diamond blade.

69

Dia

mon

d B

lade

s

69

DIamOND blaDEscONTOur


Flush Mount Adapters Quad DriveAdapters

Flush adapters make the back sideof the blade flush allowing difficult flush cuts to be achieved. Very popular with sculptors, stone and finish cutters using right angle grinders for surface relief cutting, pitching lines and intricate cutting. The steel 4-hole adapter is for 4” - 7” blades. The steel 8-hole adapter is for 8” - 14” blades. Most of the blades we sell accommodate these adapters’ hole patterns, just ask when ordering.

Description Item # Price5/8”-11 Thread/Quad Drive 0501-0001 $21.39

4” Makita Thread/Quad Drive 0501-0031 $21.39M14-2 Thread/Quad Drive 0501-0032 $21.39

Description Item # Price4-Hole

Stainless Steel 0501-0045 $19.95

Description Item # Price8-Hole

Stainless Steel 0501-0046 $29.95

Sink NecessitiesPages 111-115

Diam

ond Blades

70

70

DIamOND blaDEs

Tuck Point Rodding Diamond Blades

The kerf is used for slotting and cutting grooves and notches in granite and other stones. Can also be used for cleaning out mortar joints on masonry structures.

These blades are suited for all categories of granite, and marble. The thick segments provide the perfect size to accommodate the stainless steel and plastic rods.

Hot-Rod Diamond Blades for Countertops

Use wet only

7/8”-5/8” Arbor

Size Thick Arbor Item # Price3” 1/4” 7/8”-20mm-5/8” 0508-0615 $49.004” 1/4” 7/8”-20mm-5/8” 0508-0419 $59.005” 1/4” 7/8”-20mm-5/8” 0508-0421 $69.007” 1/4” 7/8”-20mm-5/8” 0508-0628 $99.00

Sink CutoutReinforcement

Rods• Stainless Steel• 4’ x 1/8” x 1/2”

5201-0011 $ 8.00/ea.

Size Thick Type Arbor Item # Price3” 1/8” Granite 20mm 0511-0033 $84.523” 1/4” Granite 20mm 0511-0001 $84.523” 1/4” Marble 20mm 0511-0037 $84.52

• Fiberglass• Bonds with adhesive• Use on arches and round tables

FiberglassReinforcement

Rods328ft Roll 5201-0066 $148.00100ft Roll 5201-0067 $53.50

5/8”-11 Flange AdaptersThese adapters are used to hold blades with 7/8” openings to prevent them from riding on the threads of the grinder.

Description Item # PriceNut Clamp 99-765-0027 $3.05Nut Flange 99-765-0026 $2.58

Size Thick Arbor Item # Price3” 4mm 7/8”-20mm-5/8” 0508-0707 $49.005” 4mm 7/8”-20mm-5/8” 0508-0708 $69.00


5/8”

-11

Mal

e

Ada

pter

s

71

71

aDaPTErs

1 5/8-18 Male Machine to 5/8-11 Male Thread 4308-0093 $58.452 5/8-18” Male to Ghines Female (M10X1.5) for Park Wizard 4113-0111 $63.253 5/8 x 18 Male to 1/2 Gas Female 4308-0083 $60.004 1/2” Shaft to 5/8-11 Male Thread 4308-0084 $33.855 3/8” Shaft to 5/8-11 (M) 4308-0122 $35.856 5/8-11 Female to 1/2 Gas Female 4308-0088 $48.607 5/8-11 Female to Hole for 1/4" Shaft 4308-0089 $60.008 5/8-11 Female to Hole For 3/8" Shaft 4308-0090 $60.009 5/8-11 Female to 5/8-11 Male Extension W/Waterfeed 4308-0115 $75.00

10 5/8” FEMALE to 14” MALE 4308-0050 $19.3511 5/8-11 Female to 16mm Male Thread** 4308-0086 $21.3012 5/8-11 Female to Hole for 1/2" Shaft 4308-0091 $60.0013 5/8-11 FEMALE to HOLE FOR 3/4" SHAFT** 4308-0092 $60.0014 5/8-11 FEMALE to HOLE FOR 10MM SHAFT** 4308-0114 $70.00

15 5/8-11 Female to Ghines Female (M10X1.5) 4308-0087 $40.0016 1/2 Gas Male to 12mm Male ** 4308-0096 $41.5517 1/2 Gas Male to 5/8-11 Male Router 4308-0095 $50.6518 1/2 Gas Male to Hole For 1/4" Shaft 4308-0100 $55.4019 1/2 Gas Male Thread to Hole for 3/8" Shaft** 4308-0099 $55.4020 1/2 Gas Male to Hole For 1/2" Shaft 4308-0101 $55.4021 1/2 Gas Male to Ghines Female (M10X1.5) 4308-0097 $39.2522 1-1/4”-7 Female Thread to 5/8”-11 Male Thread

DC6D & DC10D Core Drills 1101-0017 $51.0023 1-1/4”-7 x 12” long Core Bit Extension Core Drills 1101-0015 $78.0024 1-1/4”-7 x 6” long Core Bit Extension Core Drills 1101-0016 $64.0025 2” FELT WHEEL 4308-0113 $20.0026 5/8-11 X10MM** 4308-0037 $40.0027 ROUTER f/SAW-MANTA POKER 3000** 4308-0041 $125.0028 1/2” Shaft to Ghines Female (M10X1.5) 4308-0085 $39.00

1 2 34 5

6 7 8

9 1011

12 13 14 15

1617 18 19 20 21

25 26

27 22

23

24

28

5/8-

18M

”ale

5/8”

-11

Mal

e

5/8”

-18

Mal

e

Ghi

nes

Fem

ale

5/8”

-18

Mal

e

1/2

Gas

Fem

ale

1/2”

Sha

ft5/

8”-1

1M

ale

5/8”

-11

Mal

e3/

8” S

haft

1/2”

Gas

Fem

ale

5/8”

Fem

ale

5/8”

-11

Fem

ale

1/4”

Shaf

t

5/8”

-11

Fem

ale

3/8”

Shaf

t

5/8”

-11

Mal

e

5/8”

-11

Fem

ale

14”

Mal

e

5/8”

Fem

ale

16m

mM

ale

5/8”

Fem

ale

5/8”

-11

Fem

ale

1/2”

Shaf

t

5/8”

-11

Fem

ale

3/4”

Shaf

t

5/8”

-11

Fem

ale

10m

mSh

aft

5/8”

-11

Fem

ale

Ghi

nes

Fem

ale

Ghi

nes

Fem

ale

Ghi

nes

Fem

ale

1/2

Gas

Mal

e

1/2

Gas

Mal

e

1/2

Gas

Mal

e

1/2

Gas

Mal

e

1/2

Gas

Mal

e

1/2

Gas

Mal

e

12m

mM

ale

5/8”

-11

Mal

e

1/2”

Sha

ft

3/8”

Sha

ft

1/4”

Sha

ft

5/8”

-11

Mal

e

1-1/4”

MantaRouter

EXT.

EXT.

1/2”

Sha

ft

5/8”

-11

Mal

e

10m

mM

ale


Adapters

72

72

aDaPTErs

Waterfeed Attachments for Grinders and SawsGCT

A Water Feed Attachment for Saws 4914-0003 $87.00

B Waterfeed Attachment for Grinders, 3/8” Hole 1909-0042 $78.00

C Waterfeed Attachment for Grinders/Saws - Style 2 1918-0022 $49.00

Adapt

Use wet only

Blue Diamond - Water Jackets for Center Water Feed Tools

Description Item # Price1/2” shaft to 5/8-11 with 1/4” hose connection 1918-0083 $118.751/2” shaft to 5/8-11 with 1/2” hose connection 1918-0084 $123.50

1/2” shaft to 5/8-11 with garden hose connection 1918-0085 $128.25

5/8-11 fem. to 5/8-11 male with 1/4” hose connection 1918-0086 $138.505/8-11 fem. to 5/8-11 male with 1/2” hose connection 1918-0087 $140.00

5/8-11 fem. to 5/8-11 male with garden hose connection 1918-0088 $146.50

1/2” shaft to 1/2 gas with 1/4” hose connection 1918-0089 $138.001/2” shaft to 1/2 gas with 1/2” hose connection 1918-0090 $143.00

1/2” shaft to 1/2 gas with garden hose connection 1918-0091 $148.00

1/4” NPT brass valve (fits any of the above water jackets) 1918-0092 $24.00

Madein U.S.A.Made

in U.S.A.

Loc-Line Nozzles & Hoses

1 1/16” Round Nozzle for 1/4” Line 2713-0005 $.952 1/8” Round Nozzle for 1/4” Line 2713-0006 $.953 1/8” Round NPT Connector for 1/4” Line 2713-0004 $1.004 1/4” In-Line Valve 2713-0008 $5.005 1/4” Round Nozzle for 1/4” Line 2713-0007 $.956 1/4” Round NPT Connector for 1/4” Line 2713-0002 $1.007 1/4” Y Fitting 2713-0011 $2.958 1” Flare Nozzle for 1/4” Line 2713-0003 $2.959 1-1/4" Flare Nozzle for 1/2" line 2pk 2713-0013 $6.92

10 1/4" x 13" Hose Kit - 2 Connectors & 3 round nozzles 2713-0009 $8.2511 1/2" x 11" Hose Kit - 2 Connectors & 3 round nozzles 2713-0014 $9.2012 1/4" Blue Hose (per ft.) 2713-0001 $6.5013 1/2" Blue Hose Pack 11” 2713-0012 $6.9214 1/4" Hose Assembly Pliers 2713-0010 $10.95

41 2 53 6 87 9

13

10 11

12 12

Flexible Water Hose Assembly with Fittings

10`-1/4” hose with quick-change connector (to fit Flex and Makita waterfeed grinders) on one end and standard female hose connector on other end.

1918-0094 $19.95

Grinders & PolishersPages 52-58


Ada

pter

s

73

73

aDaPTErs

VACU-GUARD

A durable and effective dust containment system. Adapts easily to a variety of angle grinders. Pearl’s exclusive flexible diaphragm allows the operator to adjust the grinder angle without sacrificing dust containment efficiency. A special Delrin seal strip allows the unit to flow easily over a variety of surfaces.

Mini Roller CarriageIncrease the versatility of your grinder with the Pearl Rolling Carriage. The Pearl Rolling Carriage will help you gain greater cutting depth consistency and increased control over your angle grinder by guiding the grinder on it’s smooth action roller wheels. Great for crack chasing! *A

ngle

Grin

der

not

inclu

ded

1918-0007 $44.15

Size Description Item # Price4.5” Makita 1918-0014 $139.804.5” Makita - 9595CV 1918-0015 $139.804.5” Metabo - WE9-125 1918-0016 $139.80

Size Description Item # Price7” Makita 1918-0067 $183.957” Makita - GA7011C 1918-0066 $183.957” Metabo/Hitachi 1918-0020 $183.95

Blade Roller

Optional WaterFeed Kit

“The Original” Blade Roller™Non-marking wheels *S

aw n

ot

inclu

ded

Will fit Skil® HD5860 (8-1/4”), and Makita Hypoid®

4903-0004 $62.004903-0006 $56.65

Fits these 4” and 4½” Makita angle grinders: 9524 NB, 9527 PBH,9527 NB, 9526 PBH, 9523 NBH.

Plug it Portable GFCI Adapter with Surge Protection

Plug-it Shock Safe® GFCI & Surge Protector. Detects power leaks and shuts off electricity in less than a second to prevent shock. 80 Joules of surge protection. Test and reset buttons. 80 Joules of surge protection. Test and reset buttons. Rated for 15 Amps. 120 Volt.

1918-0099 $25.00

GFCI CordTriple Tap GFCI

1017-0004 $58.6599-229.5-0070 $85.00

Have in-line mechanical G.F.C.I. centrally placed along the cord, test and reset buttons, and include power indicator light.

Have in-line mechanical G.F.C.I. centrally placed along the cord, test and reset buttons.

GFCI

Included

Grinders & PolishersPages 52-58


Size Item # Price1/4” 1105-0066 $20.001/2” 1107-0330 $21.143/4” 1107-0331 $22.331” 1107-0332 $23.71

1-1/8” 1107-0372 $25.50

S-Segmented design for more aggressive and high speed cutting. This core bit is also designed for an extended life with faster results.

• 5/8”-11 connections • Must be used wet.

1-1/4” 1107-0333 $26.001-3/8” 1107-0334 $28.00 1-1/2” 1107-0335 $28.57 1-3/4” 1107-0336 $31.86

2” 1107-0337 $34.29

Diamond Plated SidedCore Bits

The electroplated diamond sides prevent the core from slowing down when the segments wear. These bits cut fast and have a long life. Use with drill presses or waterfeed angle grinders.Try these new core bits and see the advantages for yourself!


Size Item # Price3/8” 1105-0067 $30.001/2” 1105-0068 $31.003/4” 1105-0072 $33.001” 1105-0069 $35.00

1-1/4” 1105-0026 $45.001-3/8” 1105-0065 $46.001-1/2” 1105-0070 $65.00

2” 1105-0071 $69.00

2-1/4” 1107-0383 $51.012-1/2” 1107-0377 $51.002-3/4” 1107-0384 $57.14

3” 1107-0378 $57.14

Blind hole

Blind holeBlind hole

Core B

its

74

74

DIamOND cOrE bITsq4

Thin Wall Diamond Core Bits

Premium quality bits preferred by countertop fabricators for fast drilling of faucet holes in stone countertops. 5/8”-11 female threads. Can be used with waterfeed angle grinders.


Size Item # Price3/4” 1107-0095 $46.001” 1107-0096 $48.00

1-1/4” 1107-0097 $54.001-3/8” 1107-0098 $58.001-1/2" 1107-0099 $64.001-3/4" 1107-0100 $68.00

2" 1107-0387 $81.00

S-Segmented Core Bits

Brazed DiamondCore Bits

New brazed diamond technology provides fast cutting in granite, marble, porcelain, ceramic tile and hard stone.

Wet/dry core bits

Size Item # Price2-3/8” 1107-0388 $90.002-5/8” 1107-0389 $99.00

3” 1107-0390 $125.004” 1107-0391 $137.00

4-3/4" 1107-0392 $179.00

EL Segmented Thin Walls

5/8-11”

Size Item # Price3/4” 1105-0020 $41.501” 1105-0025 $49.25

1-1/8” 1105-0048 $50.751-1/4” 1105-0032 $49.251-3/8” 1105-0035 $53.851-1/2” 1105-0038 $55.401-5/8” 1105-0078 $56.951-3/4” 1105-0045 $64.60

2” 1105-0046 $69.002-3/8” 1105-0052 $73.852-1/2” 1105-0051 $76.95

1/8” Shank

Size Item # Price1/8” 1105-0010 $33.853/8” 1105-0018 $45.701” 1105-0014 $50.75

1-1/4” 1105-0012 $47.001-3/8” 1105-0013 $54.001-1/2” 1105-0011 $57.501-3/4” 1105-0016 $55.00

2” 1105-0017 $59.25


1-3/4” 1105-0123 $93.002” 1105-0124 $98.50

2-1/4” 1105-0126 $104.252-1/2” 1105-0125 $109.002-3/4” 1105-0127 $117.00

Cyclone Dry/WetCore Bits

Specially designed T-segments for segment durability. • Recently tested by an independent laboratory to drill 145 holes dry and 250 holes wet at an average of 30 seconds per hole.• Laser-welded segments for increased segment strength.• Perfect for use in the field when water is not an option and outperforms any wet bit used in the shop with water.

Recommended 4,000-8,000 rpm.

Dry/WetCore Bits

These high performance bits are laser welded for the ultimate in strength and durability. Special diamond segment formulations make the S33 ideal for fabricationshops that want to maximize productivity.Use to cut a wide variety of granite, marble & stones.

Cyclone Dry TurboCore Bits with Side Protection

Size Item # Price1-1/4” 1105-0129 $74.001-3/8” 1105-0128 $82.00

• 1 3/8” can be used wet or dry; • 1 1/4 wet only Aggressive turbo rim design Can drill a hole in Tropical Brown in under a minute using plenty of water • Side diamond protection facilitates any necessary boring • Special T-segment insures maximum segment strength (applies only to 1 3/8)• 5/8” - 11 thread

Size Item # Price1” 1105-0122 $62.00

1-1/4” 1107-0457 $66.671-3/8” 1107-0458 $75.001-1/2” 1107-0459 $83.33

75

Cor

e B

its

75

DIamOND cOrE bITs

Designed for drilling stone, ceramics, marble, granite, tiles, brick, masonry, etc.

Blue Sintered Core Bits with 3/8” shank

• Last longer than electroplated core bits• Easy to use

Size Item # Price5/8” 1107-0267 $35.503/4” 1107-0268 $39.401” 1107-0269 $42.20

1-1/8” 1107-0270 $46.00

Size Item # Price1-3/8” 1107-0271 $44.001-5/8” 1107-0272 $64.301-3/4” 1107-0273 $67.20

2” 1107-0274 $74.15

Size Item # Price1/2” 1105-0121 $44.005/8” 1107-0400 $46.003/4” 1107-0470 $50.007/8” 1107-0471 $52.001” 1107-0363 $60.00

Size Item # Price1-1/8” 1107-0463 $64.001-1/4” 1107-0472 $67.001-3/8” 1107-0473 $68.001-1/2” 1107-0474 $72.00

1-3/4” 1107-0355 $75.002” 1107-0475 $79.00

2-1/2” 1107-0340 $87.003” 1107-0476 $90.004” 1107-0477 $99.00

Crown Diameter

Segment Diameter


Core drills with reinforced wall for dry-wet drilling on all materials such as marble granite, engineered stones, tile, gres, concrete.

Core drills for dry drilling on all materials such as marble granite, engineered stones, tile, gres, concrete.

Core drills for dry-wet drilling on all materials such as marble granite, engineered stones, tile, gres, concrete.

Core drills for drilling blind holes on all materials such as marble granite, engineered stones, tile, gres, concrete.

Dry/Wet High PerformanceBlind Hole Core Bits

Core B

its

76

76

DIamOND cOrE bITs

Dry/Wet High Performance Core Bits

DRY High PerformanceCore Bits

Dry/Wet High PerformanceReinforced Wall Core Bits

Easy preparation with minimum clean-up; Fits on most popular high-speed grinders; Very fast cutting on granite and engineered stone.

Choose either wet or dry depending on your application.

Core Drill Bitswith plated diamond sides

Size Item # Price3/8” 1107-0045 $76.411/2” 1107-0046 $78.423/4” 1107-0047 $78.421” 1107-0048 $75.99

1-1/4” 1107-0051 $86.921-3/8” 1107-0049 $97.621-1/2” 1107-0050 $107.48

2” 1107-0052 $124.64

Size Item # Price1/2” 1105-0099 $86.473/4” 1105-0098 $89.251” 1105-0095 $86.54

1-1/4” 1105-0079 $87.341-3/8” 1105-0080 $98.271-1/2” 1105-0096 $110.13

2” 1105-0097 $125.98

Wet Dry

2-3/4” Cutting Depth

Diam. Item # Price1” 1107-0414 $54.00

1-1/4” 1107-0415 $60.00 1-3/8” 1107-0401 $68.00 1-1/2” 1107-0416 $76.00

2” Cutting Depth

Diam. Item # Price1” 1105-0104 $43.00

1-1/4” 1105-0105 $46.001-3/8” 1105-0103 $50.001-1/2” 1105-0106 $54.00

2” Cutting Depth

Diam. Item # Price1” 1107-0425 $45.00

1-1/4” 1107-0426 $48.001-3/8” 1107-0427 $53.001-1/2” 1107-0428 $57.00

2” Cutting Depth

Diam. Item # Price6mm 1107-0402 $31.008mm 1107-0407 $33.00

10mm 1107-0450 $34.0012mm 1107-0408 $36.0014mm 1107-0451 $43.00


Madein U.S.A.Made

in U.S.A.

77

Cor

e B

its

77

DIamOND cOrE bITs

Blue DiamondContinuous Ring Core Drills

(1-1/2” cutting depth)5/8”-11 Female

Threaded Conn.

4” Cutting Depth 1-1/2” Cutting Depth

Diam. Item # Price Item # Price5/8” 1107-0196 $72.00 - -7/8” 1107-0197 $73.00 1107-0172 $62.50 1” 1107-0198 $75.00 1107-0157 $65.00

1 1/8” 1107-0199 $75.00 1107-0173 $66.00 1 1/4” 1107-0200 $78.00 1107-0158 $66.00 1 3/8” 1107-0201 $79.00 1107-0152 $69.00 1 1/2” 1107-0202 $82.00 1107-0174 $72.00 1 5/8” 1107-0203 $90.00 1107-0175 $73.00 1 3/4” 1107-0143 $93.00 1107-0176 $75.00

2” 1107-0215 $117.00 1107-0153 $82.00

Re-Tip and save money!

Granite City Tool can Re-Tip and Re-Electroplate most Blue Diamond Tools in 3-10 days.

Madein U.S.A.Made

in U.S.A.

Madein U.S.A.Made

in U.S.A.

• 1-1/4”-7 thread• 13” Drill depth• Wet use only

Fast cutting diamond core bits made to go on industrial diamond core drills with center waterfeed.

Blue Diamond Deep Hole Granite Core BitsBlue Diamond

Segmented Core Drills

Call for quote on length sizes over 12”. Any Size up to 8’ long available.

Re-Tip and save money!

5/8”-11 Female Threaded Conn.

Size Item # Price2” 1107-0275 $120.00

2 1/4” 1107-0276 $128.502 3/8” 1107-0277 $130.002 1/2” 1107-0278 $133.502 3/4” 1107-0279 $145.00

3” 1107-0265 $155.003 1/2” 1107-0280 $163.503 3/4” 1107-0281 $170.00

4” 1107-0155 $183.505” 1107-0195 $230.006” 1107-0266 $250.007” 1107-0264 $358.508” 1107-0282 $399.009” 1107-0283 $433.50

10” 1107-0284 $458.50

Diam. Item # Price2 1/4” 1107-0161 $108.00 2 3/8” 1107-0162 $113.00 2 1/2” 1107-0163 $117.00 2 3/4” 1107-0164 $125.00

3” 1107-0165 $132.00 3 1/2” 1107-0166 $179.00

4” 1107-0144 $197.00 5” 1107-0167 $248.00 6” 1107-0168 $375.00

Call Us for all your custom coring! we also offer concrete bits

We also offer Blue Diamond cores with Brass Nut threads,

call for more info.


DX Series

DX Series

3 Step

Pos. 4” Price 5” Price1 4106-1569 $49.00 4106-1572 $79.002 4106-1570 $49.00 4106-1573 $79.003 4106-1571 $49.00 4106-1574 $79.00

Polishing P

ads

78

78

DIamOND POlIsHINg PaDswET

DX-PROPolishing Pads

Designed to compete and beat the finest polishing pads from competing brands in both price and performance. Has one of the strongest Q.R.S. backing in the industry to insure your pad will stay on the holder, even after hundreds of uses. Try these pads and throw your old one out the door. Save money and get better results. Use on granite, marble, and engineered stone.

• One of the strongest Q.R.S connections available• For granite, marble, engineered stone, & concrete

• 3mm thick• Premium quality• Extra flexible• Use Wet Only

DX-PRO III EHS Polishing Pads

Extreme High Speed 3 Step Polishing System for granite, and marble

Pos. 4” Price1 4106-1504 $38.202 4106-1505 $38.203 4106-1506 $38.20

1-3 6001-0366 $114.60• 3mm thick• Use wet only• Q.R.S. connection

3-Step Polishing Pads

Marmoelettromeccanica introduces its TURBOPADS with LONG-LIFE patented technology born from its long experience in diamond tool’s field. They are innovative and exclusive polishing diamond pads with Velcro, developed using LONG-LIFE technology.

Sets include grits 40-3000, excluding #60

Grit 4” Price 5” Price40 4106-1440 $28.00 4106-1449 $42.0060 4106-1429 $28.00 - -100 4106-1441 $28.00 4106-1450 $42.00200 4106-1442 $28.00 4106-1451 $42.00400 4106-1443 $28.00 4106-1452 $42.00800 4106-1444 $28.00 4106-1453 $42.00

1500 4106-1445 $28.00 4106-1454 $42.003000 4106-1446 $28.00 4106-1455 $42.00Black 4106-1447 $38.50 4106-1456 $49.00White 4106-1448 $38.50 4106-1457 $49.00

40-3000 6001-0340 $196.00 6001-0341 $294.00


Delivers the optimum balance between value,

performance, and life.

If your looking for one go to pad this is it!

• 3mm thick• Use Wet Only

replaces EaglePolishing PadsrIval standard Grit 4” Price

50 4106-1608 $14.95100 4106-1609 $14.95200 4106-1610 $14.95400 4106-1611 $14.95800 4106-1612 $14.951500 4106-1613 $14.953000 4106-1614 $14.95Black 4106-1586 $34.95White 4106-1585 $34.95

50-3000 6001-0403 $104.65

• PERFORMANCE• LIFE• FLEXIBILITY• SHINEWhatever you’re looking for,this pad delivers!


replaces Dura-PlusPolishing PadsrIval Premium Grit 3” Price 4” Price

50 4106-1615 $15.95 4106-1578 $18.95100 4106-1616 $15.95 4106-1579 $18.95200 4106-1617 $15.95 4106-1550 $18.95400 4106-1618 $15.95 4106-1581 $18.95800 4106-1619 $15.95 4106-1582 $18.95

1500 4106-1620 $15.95 4106-1583 $18.953000 4106-1621 $15.95 4106-1584 $18.95Black 4106-1622 $29.95 4106-1586 $34.95White 4106-1623 $29.95 4106-1585 $34.95

50-3000 6001-0404 $111.65 6001-0405 $132.65

Polishing PadsrIval Economy

Our goal was simple! The Best Pad at this

price Period!


replaces XcEl

Ask your GCT Sales rep. about volume discounts!

Grit 4” Price50 4106-1601 $9.95

100 4106-1602 $9.95200 4106-1603 $9.95400 4106-1604 $9.95800 4106-1605 $9.95

1500 4106-1606 $9.953000 4106-1607 $9.95Black 4106-1586 $34.95White 4106-1585 $34.95

50-3000 6001-0402 $69.95

79

Pol

ishi

ng P

ads

79

DIamOND POlIsHINg PaDsrIval wET


DRY

DRY

DRY

Grit 4” Price60 4106-1507 $19.95

100 4106-1508 $19.95200 4106-1509 $19.95400 4106-1510 $19.95800 4106-1511 $19.95

1500 4106-1512 $19.953000 4106-1513 $19.954000 4106-1514 $19.955000 4106-1515 $19.95

60-3000 6001-0368 $139.65

Grit 4” Price 50 4106-0540 $12.95 100 4106-0541 $12.95 200 4106-0542 $12.95 400 4106-0543 $12.95 800 4106-0544 $12.95

1500 4106-0545 $12.95 3000 4106-0546 $12.95 Black 4106-0547 $19.95White 4106-0548 $19.95

50-3000 6001-0004 $90.65

Polishing P

ads

80

80

DIamOND POlIsHINg PaDsDry

DX Series DX-PRO DRYEHS Polishing Pads

• Q.R.S Connection• Use under 4,000 RPM

Extreme High Speed professional dry pads. Can be used on granite, marble, and engineered stone. Can be used wet also.

DX Series Desert-Rain Wet/DryPolishing Pads

The original dry diamond polishing pad. A perfect dry diamond polishing pad for granite, marble, natural and engineered stone,and can even be used on concrete. Can be used wet or dry.

• Premium performance• Q.R.S. connection• Use under 4,000 RPM

• One of the best priced• Super value

Grit Item # Price60 4106-1479 $26.95

100 4106-1480 $26.95200 4106-1481 $26.95400 4106-1482 $26.95800 4106-1483 $26.95

1500 4106-1484 $26.953000 4106-1485 $26.954000 4106-1486 $26.955000 4106-1487 $26.95

60-3000 6001-0355 $188.65

Cyclone Dryflex IIPolishing Pads

• Same professional finish as Dryflex I at a more affordable cost.• Flexibility is gained after continual use making it feasible to polish the most complex edges.• Excellent system to have at the job site.


Grit 3” Price 4” Price 5” Price150 4106-0026 $28.56 4106-0038 $38.36 4106-0053 $55.30300 4106-0027 $28.56 4106-0039 $38.36 4106-0054 $55.30500 4106-0028 $28.56 4106-0040 $38.36 4106-0055 $55.301000 4106-0029 $28.56 4106-0041 $38.36 4106-0056 $55.302000 4106-0030 $28.56 4106-0042 $38.36 4106-0057 $55.303000 4106-0031 $28.56 4106-0043 $38.36 4106-0058 $55.30Black 4106-0046 $48.81 4106-0061 $62.75 4106-0080 $79.70White 4106-0047 $48.81 4106-0062 $62.75 4106-0081 $79.70

150-3000 6001-0032 $171.36 6001-0034 $230.16 6001-0036 $331.80

Grit 3” Price 4” Price 5” Price200 4106-0475 $17.26 4106-0380 $20.96 4106-0480 $31.57500 4106-0476 $17.26 4106-0381 $20.96 4106-0481 $31.571000 4106-0477 $17.26 4106-0382 $20.96 4106-0482 $31.572000 4106-0478 $17.26 4106-0383 $20.96 4106-0483 $31.573000 4106-0479 $17.26 4106-0384 $20.96 4106-0484 $31.57

200-3000 6001-0068 $86.30 6001-0059 $104.80 6001-0069 $157.85

Grit 3” Price 4” Price60 4106-0063 $66.40 4106-0083 $81.31150 4106-0051 $59.53 4106-0078 $72.82300 4106-0052 $59.53 4106-0079 $72.82

81

Pol

ishi

ng P

ads

81

DIamOND POlIsHINg PaDs

A proven top performerfor a professionalhigh quality polish.

Step 1: Vitrified discs (60, 150,300 grits) Step 2: Resin discs (150, 300, 500, 100, 2000 & 3000 grits).Step 3: Final polisher discs (Black for granite, White for marble).

Ceramica ResinPolishing Pads

The EX discs areone of the best available toachieve a high polish on engineered stone and difficult to polish stones suchas green marble, blackmarble, black granite, etc. Also works well for porcelain, ceramic, terrazzo, quartz, and all granite types.

• Use under 4,000 RPM • Use wet only• Q.R.S. connection

Ceramica EXPolishing Pads

One of the best available for engineered stone


Developed to be a longer lasting disc to bring out the deep glossy finish from the higher grit pads. Designed to be extremely flexible to polish difficult areas.

Ceramica Metal Pads


Grit 3” Price100 4106-0032 $40.71200 4106-0034 $40.71500 4106-0035 $40.711000 4106-0036 $40.712000 4106-0037 $40.713000 4106-0033 $40.71Black 4106-0048 $56.87White 4106-0049 $56.87

4113-0033 $28.22

Specially designed to accept the TwisTouch Turbo wheels and isnecessary to use the system. This adapter stays on the grinder at all times, so only one is needed.

Designed to polish flat surfaces without getting the wavy effect that may result from flexible diamond polishing discs. The disc design makes it easy to polish near walls, corners, and staircases. The new quick-change design is faster than hook & loop backed discs to remove and does not have the problem of wearing out before the diamond disc does.

• Use wet only• Use under 4,000 RPM

TwisTouchAdapter TwisTouch Turbo Polishing Discs

4” Rigid Backer 4113-0021 $13.25

wET


Ceramica VitrifiedPolishing Pads

DRY

DX Series

DRY

Grit 4” Price50 4106-1589 $46.95

150 4106-1590 $46.95300 4106-1591 $46.95

Grit 3” Price 4” Price 5” Price60 4106-0050 $57.96 4106-0082 $78.11 4106-0086 $110.87

150 4106-0044 $46.84 4106-0059 $62.29 4106-0084 $90.36300 4106-0045 $46.84 4106-0060 $62.29 4106-0085 $90.36

Grit 3” Price50 4106-1592 $24.95100 4106-1593 $24.95200 4106-1594 $24.95400 4106-1595 $24.95800 4106-1596 $24.95

1500 4106-1597 $24.953000 4106-1598 $24.95Black 4106-1599 $29.95White 4106-1600 $29.95

Grit 4” Price 5” Price 7” Price#50 4106-1488 $19.00 4106-1496 $28.00 4106-1632 $44.95#100 4106-1489 $19.00 4106-1497 $28.00 4106-1633 $44.95#200 4106-1490 $19.00 4106-1498 $28.00 4106-1634 $44.95#400 4106-1491 $19.00 4106-1499 $28.00 4106-1635 $44.95#800 4106-1492 $19.00 4106-1500 $28.00 4106-1636 $44.95

#1500 4106-1493 $19.00 4106-1501 $28.00 4106-1637 $44.95#3000 4106-1494 $19.00 4106-1502 $28.00 4106-1638 $44.95Black 4106-1495 $19.00 4106-1503 $28.00 4106-1639 $44.95

50-3000 6001-0358 $133.00 6001-0359 $196.00 6001-0411 $314.65

• Best dry pad available• Superior Polish• Extra Flexible • 3mm Thick

• Q.R.S Connection• Use under 4,000 RPM

Polishing P

ads

82

82


Vitrified pads are a very aggressive long lasting pre-polish disc. Designed to remove saw and grinding marks to prep stone for polishing.

• Q.R.S Connection

Cyclone 4” Diamond VitrifiedPolishing Pads

These discs are specifically designed to handle the hard job of removing saw and grinding marks in order to prepare the stone for polishing. The vitrified bond is compressed diamond impregnated pellet surrounded by plastic. Alpha® Vitrified Ceramica Pads are aggressive and long lasting.

• Q.R.S Connection• Use wet only• Use under 4,000 RPM

Cyclone Convex Polishing PadsThese pads are useful for ogee edge polishing. Good for polishing difficult to reach areas like inside corners of sink cut outs. Size: 76mm


Con-Dri ForConcrete and Granite


Grit 4” Price 5” Price60 4106-1050 $49.25 4106-0825 $76.35

120 4106-1051 $41.96 4106-0826 $64.69220 4106-1052 $35.32 4106-0827 $54.62400 4106-1053 $27.09 4106-0828 $41.74600 4106-1054 $27.09 4106-0877 $41.74800 4106-1055 $26.31 4106-0824 $40.501800 4106-1056 $26.31 4106-0823 $40.503000 4106-1057 $26.31 4106-0822 $40.50

60-3000 6001-0332 $259.64 6001-0180 $399.00

Hookit 5” x 1” 4106-0829 $3.95Hookit to Hookit II 5” x 1” 4106-0878 $4.76

Grit 4” Price30 4106-1577 $21.9550 4106-1533 $21.95

100 4106-1534 $21.95200 4106-1535 $21.95400 4106-1536 $21.95800 4106-1537 $21.951500 4106-1538 $21.953000 4106-1539 $21.95BUFF 4106-1540 $21.95

50-3000 6001-0370 $153.65

Grit 4” Price 5” Price30 4106-0375 $44.00 4106-0757 $109.1550 4106-0376 $44.00 4106-0758 $94.75

100 4106-0377 $44.00 4106-0759 $89.75

83

Pol

ishi

ng P

ads

83


3M Polishing Pads

Micron graded diamond abrasive, in Q.R.S. disc form.For finishing non-ferrous metals, stone, glass, and ceramics.

• Very flexible• Extra long life• Q.R.S backing• For marble & concrete polishing• One of the highest quality pads available

Quantity Discounts

3M 5” Trizact White Hookit II

Hookit II discs turn the Hook & Loop system upside down by reversing the hooks and the loops. In the Hookit II system the patented stems (hooks) are placed on the back of the disc, while the loops are placed on the back up pad. Research shows that the hooks on traditional hook and loop back up pads are prone to wearing out prematurely, that’s why we placed the loops on the back of the disc instead of the pad.

Copper Resin Pads


Specially designed copper bond for long lasting and high performance. Designed for granite, marble, natural and engineered stone, and can even be used on concrete.

DS CopperFlexible Polishing Pads


Designed with a copper bond for long lasting. Copper dissipates heat while the resin is given longer life. Designed for granite, marble, natural and engineered stone.


Size/Type Item # Price2” Rubber 4113-0083 $8.953” Rubber 4113-0088 $10.004” Rubber 4113-0085 $8.755” Rubber 4113-0086 $11.25

Size Item # Price3” 4113-0009 $8.504” 4113-0015 $9.005” 4113-0016 $12.007” 4113-0032 $15.00

Size/Type Item # Price3” Rigid 4113-0013 $17.244” Rigid 4113-0014 $17.695” Rigid 4113-0026 $22.10

Size thick Item # Price3” 3/4” 4113-0041 $17.854” 3/4” 4113-0040 $19.755” 3/4” 4113-0046 $19.75

Size thick Item # Price3” 1” 4113-0042 $19.754” 1” 4113-0044 $19.755” 1” 4113-0047 $20.75

Size Type Item # Price3” Rigid 4113-0074 $13.004” Rigid 4113-0008 $15.005” Rigid 4113-0075 $24.507” Rigid 4113-0114 $70.00

Diskit Backer PadsVinyl backer pad to work with PSA backed sanding discs. 5/8”-11 female threads. 10,000 RPM max.

5” PSA 1908-0064 $19.995” QRS 1908-0081 $16.165” QRS 1908-0088 $18.504” QRS 1908-0086 $18.50

With center hole

Without center hole

Size Item # Price3.25” 4113-0134 $22.50

2” Rubber 4113-0022 $16.80 3” Rubber 4113-0023 $17.12 4” Rubber 4113-0024 $18.23 5” Rubber 4113-0030 $25.97

4” Rubber 4113-0135 $10.95

Polishing P

ads

84

84

backEr HEaDs

Semi-flexible foam backer heads with 5/8”-11 female thread.

Higher Quality

Extremely flexible backer heads with 5/8”-11 female thread.

Q.R.S. connection

Q.R.S. connection

Super and Extra ThickBacker Heads

Hook and Loop Backer Heads

Foam Hook and Loop Backer Heads

Q.R.S. connection

Q.R.S. connection

Hook and Loop Backer Heads with 5/8”-11 female threads

Max RPM 4,000 RPM

Highly resistant to the rigors of daily use!

Q.R.S. connection

Aluminum Backer Heads with 5/8”-11 female threads

Ogee Aluminum Rubber Backer Heads 5/8”-11 female thread

Makes it able to polish concave profiles! Rubber helps protect edges.

SUPER Flexible


Size Type Item # Price4” Plastic - Velcro Backed 4113-0063 $8.604” Aluminum - 5/8”-11 4113-0082 $32.505” Plastic - Velcro Backed 4113-0107 $12.305” Rubber - Velcro Backed 4113-0108 $12.305” Aluminum - 5/8”-11 4113-0081 $39.95

Size Item # Type Price4” 4113-0036 Aluminum $43.635” 4106-0369 Aluminum $71.91

Grits 2-1/4” x 4” Price70 4103-0020 $18.00

120 4103-0017 $15.50220 4103-0013 $12.80400 4103-0010 $10.90

600R 4103-0005 $9.60800 4103-0006 $9.60

1800 4103-0007 $9.603500 4103-0008 $9.60

Handblock 4103-0011 $10.80Set: 8 Grits, Handblock 4103-0032 $100.00

No Backing Hook and Loop BackGrit Item # Price Item # Price70 4103-0127 $241.80 4103-0137 $260.10120 4103-0128 $207.10 4103-0138 $225.10220 4103-0129 $173.40 4103-0139 $190.20

220R 4103-0130 $156.10 4103-0140 $169.40400 4103-0131 $164.30 4103-0141 $181.40

400R 4103-0132 $164.30 4103-0142 $162.20600R 4103-0133 $146.90 4103-0143 $162.20800R 4103-0134 $146.90 4103-0144 $162.201800R 4103-0135 $146.90 4103-0145 $162.203500R 4103-0136 $146.90 4103-0146 $162.20

7009-0007 $149.95

85

Pol

ishi

ng P

ads

85


Snail Lock Adapters Diamond Snail Lock Adapters

4”: Max 4,000 RPM5”: Max 3,000 RPM

5/8”-11 female thread

These snail lock adapters allow a simple twist to change pads. This “Quick Change” process saves time, increases productivity!

Diamond Hand Pads

Professional quality diamond hand pads with thick foam backing. From grind to polish.

Color Grit Item # PriceGreen 60 4103-0113 $22.85Black 120 4103-0114 $20.00Red 200 4103-0115 $15.00

Yellow 400 4103-0116 $14.30White 800 4103-0117 $14.30Blue 1800 4103-0118 $10.00

60-1800 6001-0087 $96.45

GENESISDiamond Strips

Diamond strips are flexible to allow for shaping and smoothing small, intricate areas.

Q.R.S. connection

PSA

back

ings

also

ava

ilabl

e

GENESIS 12” x 12” Diamond Sheets

Genesis™ brand diamond discs and pads are designed to grind, hone and polish surfaces to a smooth finish. They work well on almost all hard surfaces and substances.

Da’ ShaftPolisher Extension

This shaft allows you to get into

places you had to polish

by hand before.

5/8”-11 female thread


White Cotton Buffer50 PLY X 10

Rows of sewing, 3/8” hole

GCT

Hook and Loop

Backing

These solid felt buffers are hook and loop backed for quick change. This high quality felt ensures positive results. Use to apply buffing compounds. Great for cleaning and restoring. Medium density for long life. Can be used wet or dry.

High density cotton

Buffers are made of the finest quality felting wools, carefully selected and blended to ensure uniform quality and density.

GCT

GCT

7” 4101-0024 $10.24

4” Felt Buffer

4” 4101-0032 $12.75

Felt Buffing Wheels

3” 4101-0001 $6.594” 4101-0002 $8.195” 4101-0003 $11.24

Buffer Cap

Solid Felt Buffers3” have 1/2” recesses

5” Alum. 4101-0015 $39.20

Size 1” Thick Price 2” Thick Price Size 3” Thick Price5” 4101-0011 $22.90 4101-0013 $35.20 6” 4101-0020 $95.006” 4101-0014 $32.04 4101-0017 $56.10 8” 4101-0030 $131.507” 4101-0025 $43.49 4101-0018 $76.50 10” 4101-0031 $199.008” 4101-0026 $49.95 4101-0019 $99.959” 4101-0027 $65.00 4101-0028 $126.5010” 4101-0022 $77.50 4101-0029 $155.90

Can be used for Floor Polishing Applications Too!

Available in rolled and rubber backed mat cocoa fibers. For use with automatic top polishers. This buffer will follow the contour of the stone applying just the right amount of pressure to bring out a consistent quality polish.

Cocoa Mat BufferGCT

6” 4114-0186 $42.008” 4114-0040 $66.00

10” 4114-0042 $69.00

Buffing S

upplies

86

86

buffINg suPPlIEs


GC-20 PolishingCompound

Alum OxidePolishing Powder

Polishing Powder Tint

Tin Oxide

Stone Polishing Bars

This inexpensive, specially blended polishing compound is well suited for polishing both marble and granite surfaces.

Formulated to give the user an inexpensive, high-gloss polish on marble or granite surfaces.

Excellent for coloring Tin Oxide and Cerium Oxide, along with all other polishing compounds. Solves the problem of light colored specks on finished surfaces.

No product used in the granite and marble industries is better known than Tin Oxide. Pure Tin Oxide is one of the best polishing agents for granite. It is fast in action, economical to use, and produces a gem-brilliance. Packaged in 1, 5, 10, 25, 50 & 100 lb. containers.

Paste bars are melted into a buffer for high-gloss polishing of marble or granite. Simply apply to felt buffer wheel for polishing.

Cerium OxideMarble Powder

Used in precision polishing and lapping applications. Perfect for putting the perfect polish on your marble.

0102-0002 $15.75/lb.

Formulated to brighten the color and brilliance of dark stone and aids in restoring the luster to faded black granites. Works as an impregnator to enhance the beauty and help protect black granites from the effects of acid rain. Can be used before etching for greater contrast and will aid in hiding scratches, scuffs and imperfections on polished surfaces. 1 pint container.

Black BeautyGCT

GCT GCT

GCT GCT

GCTGCT

Dia-GloDiamond Buffing Compound

Cre

ates

a b

rillia

nt g

low

!

The dark hue will not highlight the normal microscopic cracks on stone surfaces and will bring out the rich color and gloss on medium to dark stone.

4111-0005 $12.05/lb.4111-0002 $5.50/lb.

Marble (White) 4104-0001 $5.95Granite (Gray) 4104-0002 $5.95Black 4111-0003 $10.25/lb.

Red 4111-0004 $10.25/lb.

0112-0001 $18.95/lb.

4102-0003 $59.85

Size Color Item # PriceQt. Marble 4111-0009 $25.00Qt. Lt. Granite 4111-0006 $21.95Qt Dk. Granite 4111-0008 $21.95

2 Gal. Dk. Granite 4111-0010 $179.00

87

Buf

fing

Sup

plie

s

87

buffINg suPPlIEs


Silicon C

arbide

88

88

sIlIcON carbIDE

Spirakut DiscsSpiralcool Backer Pads

8” x 1½” x 1½” Silicon Carbide Rubbing Stones

These discs have been the standard for grinding on marble, granite and stone in Italy and Europe for almost 30 years. Use for wet or dry grinding. The dome shape allows the operator to apply 300% more abrasive to the work surface which insures faster cutting and less operator fatigue.

Made of heavy molded rubber. Used with 5/8”-11 threaded lock-nut to secure the Spirakut, Tyrolit, or Dia-Pro sanding discs.

These abrasive rubbing bricks are most commonly used for hand polishing and minor repairs on granite and marble surfaces. Also used for dressing diamond blades.

Size: 7” x 7/8”

• Very high stock removal rates• Stable, adaptable finishing paper• Strong resin bond• Especially suitable for sanding hard-to-reach areas• Longlife coating means increased tool life• Open coating prevents premature loading with sanding dust

5” Self-Stick Backing Silicone Carbide Sanding Discs

Grit Item # Price#24 1905-0016 $7.00#36 1905-0018 $7.00#50 1905-0019 $7.00

#100 1905-0017 $7.00#120 1905-0011 $7.00#180 1905-0014 $7.00#220 1905-0012 $7.00#240 1905-0013 $7.00#320 1905-0015 $7.00

Size Item # Price7” 4113-0029 $19.509” 4113-0031 $23.00

Grit Item # Price#24 4112-0010 $10.75#36 4112-0011 $10.75#60 4112-0012 $10.75#80 4112-0013 $10.75

#120 4112-0014 $10.75#220 4112-0015 $10.75#320 4112-0016 $15.50#600 4112-0017 $15.50

5/8” lock-nut 4113-0007 $5.50Wrench 4113-0004 $6.50

Grit BOX 5” Price#60 50 1908-0109 $9.95#80 50 1908-0110 $9.95

#120 100 1908-0111 $16.95#220 100 1908-0112 $16.95#240 100 1908-0113 $16.95#320 100 1908-0114 $16.95#400 100 1908-0115 $16.95#500 100 1908-0116 $16.95


89

Sili

con

Car

bide

89

sIlIcON carbIDE

Silicon CarbideWet/Dry Discs

5” PSA Silicon Sanding Discs

Consists of waterproof hook & loop combined with silicon carbide abrasive, which works well to polish: marble, granite, travertine, terrazzo, and onyx. Sold in boxes of 50 pieces per grit or an assortment box of 50 pieces. Hook & loop backed. Use with hook & loop backer pads.

Peel and stick for all your sanding and polishing needs. PSA backed. Come in boxes of 100. Use with 5” Diskit Backer Pads

7” Heavy-Duty Dry Silicone Carbide Sanding Discs

High quality industrial grade dry silicone carbide sanding discs.

Hook & LoopGrinding Discs

High quality industrial grade wet/dry silicone carbide sanding discs. With hook and loop backing.

Sold only inboxes of 50

no hole

Grit BOX 7” Price#24 25 1908-0068 $19.30#40 25 1908-0069 $15.80#80 100 1908-0085 $40.00

#120 100 1908-0071 $35.70#220 100 1908-0072 $34.00#320 100 1908-0073 $36.00#400 50 1908-0087 $18.00

Grit BOX 5” Price#60 50 1908-0101 $19.00#80 100 1908-0102 $38.00

#120 100 1908-0103 $36.00#220 100 1908-0104 $36.00#240 100 1908-0105 $36.00#320 100 1908-0106 $36.00#400 100 1908-0107 $36.00#600 100 1908-0108 $36.00

Grit BOX 4” Price 5” Price 7” Price#60 50 1905-0090 $18.00 1905-0082 $24.00 1905-0098 $45.20#80 50 1905-0091 $16.00 1905-0083 $19.00 1905-0099 $35.00

#120 50 1905-0092 $16.00 1905-0084 $18.00 1905-0100 $35.00#220 50 1905-0093 $15.00 1905-0085 $18.00 1905-0101 $34.00#240 50 1905-0094 $15.00 1905-0086 $18.00 1905-0102 $34.00#320 50 1905-0095 $15.00 1905-0087 $18.00 1905-0103 $34.00#400 50 1905-0096 $15.00 1905-0088 $18.00 1905-0104 $34.00#600 50 1905-0097 $15.00 1905-0089 $18.00 1905-0105 $34.00

Grit BOX 4” Price 5” Price#80 50 1908-0031 $17.21 1908-0039 $24.13

#120 50 1908-0032 $17.21 1908-0040 $24.13#240 50 1908-0033 $17.21 1908-0041 $24.13#320 50 1908-0034 $17.21 1908-0042 $24.13#400 50 1908-0035 $17.21 1908-0043 $24.13#500 50 1908-0036 $17.21 1908-0044 $24.13#600 50 1908-0037 $17.21 1908-0045 $24.13

Assorted 50 1908-0038 $18.40 1908-0046 $24.52


Silicon C

arbide

90

90

sIlIcON carbIDE

Alpha® PVA Quick Change System (Snail Lock) is a low-speed version of the original Makita-Style PVA and is designed for use on an aluminum snail-lock backer plate specifically developed for low-speed polishing tools such as the Alpha® AIR-658. Alpha® PVA Quick Change will work on all of the same applications that the Makita-Style PVA will, with the same excellence and quality.

Industrial grade silicon carbide belts works great for granite and other stone. 600 grit will produce a final hone finish. Sold individually, or in boxes of ten belts.

Dressing cleans away foreign particles and exposes sharp new cutting edges. Weight: 2 lbs.

Silicon Carbide Grinding Wheels

Quick Change PVA Polishing System

CAPCO Silicon CarbideSanding Belts

Grinding Wheel Dresser

*All Styles are 4” in Diameter

4 x 2” 5 x 2” 6 x 2”Grit Item # Price Grit Item # Price Grit Item # Price#24 1903-0124 $8.95 #24 1903-0134 $9.00 #24 1903-0144 $15.00#36 1903-0125 $8.95 #36 1903-0135 $9.75 #36 1903-0145 $15.00#46 1903-0126 $8.95 #46 1903-0136 $9.75 #46 1903-0146 $15.00#60 1903-0127 $8.95 #60 1903-0137 $9.75 #60 1903-0147 $15.00#80 1903-0128 $8.95 #80 1903-0138 $9.75 #80 1903-0148 $15.00

#120 1903-0129 $8.95 #120 1903-0139 $11.50 #120 1903-0149 $15.00#220 1903-0130 $8.95 #220 1903-0140 $11.50 #220 1903-0150 $21.15

#320 1903-0151 $28.00#500 1903-0152 $33.25#600 1903-0153 $29.00

Size Item # PriceHandle w/Blades 99-016-0001 $24.00

4-Blades 99-016-0002 $3.25

3” x 21” Grit Item # Price#36 1901-0024 $2.50#60 1901-0037 $2.25

#120 1901-0021 $1.90#220 1901-0026 $1.90#320 1901-0027 $1.90#400 1901-0028 $1.90#600 1901-0029 $1.90

Style RPM Grit Item # PriceBacker - - 4113-0036 $43.63

Extra Coarse 4,000 #40 4106-0224 $30.90Coarse 4,000 #80 4106-0225 $30.90Medium 4,000 #220 4106-0226 $30.90

Fine 4,000 #400 4106-0227 $30.90Extra Fine 4,000 #600 4106-0228 $30.90Assorted 4,000 All 4106-0229 $30.90


Flat Polishers

Grinding tools used on polishing lines for honing stone.

Grit 5” Price80 4106-0975 $59.00

120 4106-0976 $59.00220 4106-0977 $59.00280 4106-0978 $59.00

400 4106-0979 $59.00600 4106-0980 $59.00800 4106-0981 $59.00

1200 4106-0982 $59.003000 4106-0983 $59.00

91

Mac

hine

Pol

ishi

ng

91

macHINE POlIsHINg

Toro-B™ Multi Edge Polishing System

Toro™ Flat Edge Polishing System

Grit 5” Price50 4106-0250 $54.95

100 4106-0251 $54.95200 4106-0252 $54.95500 4106-0253 $54.95

1000 4106-0255 $54.952000 4106-0256 $54.95Buff 4106-0257 $54.95

Grit 4” Price 5” Price50 4106-0603 $34.95 4106-0610 $42.00

100 4106-0604 $34.95 4106-0611 $42.00200 4106-0605 $34.95 4106-0612 $42.00500 4106-0606 $34.95 4106-0613 $42.00

1000 4106-0607 $34.95 4106-0614 $42.002000 4106-0608 $34.95 4106-0615 $42.00Buff 4106-0609 $34.95 4106-0616 $42.00

The premium TORO-B™ Multi Edge Polishing System is manufactured for automated wet-polishing multi-head machines using the snail lock adaptor. Polishes flat as well as most rounded edges.

The top performing TORO™ Flat Edge Polishing System is developed for automated wet-polishing multi-head machines using the snail lock adaptor.

The TORO™ discs work best at a feed speed of 65cm/25in/minute and a pressure of 30psi (2 bars) and an increase of 3psi (0.2 bars) at each consequent step. Start with grit 200 if you have a good cut-off and a five step machine.

Description Pos. 4” PriceSnail Lock Metal 1 1906-0157 $125.00Snail Lock Metal 2 1906-0158 $125.00

Polishing Pad 3 1906-0159 $23.50Polishing Pad 4 1906-0160 $23.50Polishing Pad 5 1906-0161 $23.50

5-Step SystemEdge Shaping Wheels

• Water spread system• Supreme quality• High segment• Best performance


Polishing wheels with cushion rubber backing

Snail lock has 10mm rubber backing.

Cushioned polishing wheels for vertical line machines.Excellent flat polished edges on all stones!

Cushioned polishing wheels for radiused edgesSuperior polish on all stones: granite, marble, and engineered.

500-800 RPM30-45 PSI

500-800 RPM30-45 PSI

Machine P

olishing

92

92

macHINE POlIsHINg

6 Step Bull Nose Edge Polishing Discs

POS. 5” Price1 4106-1680 $94.502 4106-1681 $94.503 4106-1682 $69.994 4106-1683 $69.995 4106-1684 $69.996 4106-1685 $69.99

Snail Lock

POS. 5” Price50 4106-1664 $59.99

100 4106-1665 $59.99200 4106-1666 $59.99400 4106-1667 $59.99800 4106-1668 $59.99

1500 4106-1669 $59.993000 4106-1670 $59.99Buff 4106-1671 $64.95

Edge Polishing Discs

Q.R.S Connection

POS. 5” Price50 4106-1656 $36.99

100 4106-1657 $36.99200 4106-1658 $36.99400 4106-1659 $36.99800 4106-1660 $36.99

1500 4106-1661 $36.993000 4106-1662 $36.99Buff 4106-1663 $39.99

Snail Lock Evolution Polishing Wheelsfor Edge Machines

Designed for Pro-Edge, Velocity, Fastback, Marmo Meccanica, CMPI, Monteressor, Commandvilli, and other automatic edge polishing machines.

Designed for flat edges, bullnoses, and chamfering.

Grit 4” Price 5” Price 6” Price#50 4116-0083 $ 49.95 4116-0067 $ 64.95 4116-0075 $ 79.95

#100 4116-0084 $ 49.95 4116-0068 $ 64.95 4116-0076 $ 79.95#200 4116-0085 $ 49.95 4116-0069 $ 64.95 4116-0077 $ 79.95#400 4116-0086 $ 49.95 4116-0070 $ 64.95 4116-0078 $ 79.95#800 4116-0087 $ 49.95 4116-0071 $ 64.95 4116-0079 $ 79.95

#1500 4116-0088 $ 49.95 4116-0072 $ 64.95 4116-0080 $ 79.95#3000 4116-0089 $ 49.95 4116-0073 $ 64.95 4116-0081 $ 79.95BUFF 4116-0090 $ 49.95 4116-0074 $ 64.95 4116-0082 $ 79.95

Snail Lock


93

Mac

hine

Pol

ishi

ng

93

macHINE POlIsHINg

Antiquing BrushesGrit 4” Price 5” Price 6” Price36 4119-0001 $28.00 4119-0007 $33.25 4119-0013 $37.5046 4119-0002 $28.00 4119-0008 $33.25 4119-0014 $37.5060 4119-0003 $28.00 4119-0009 $33.25 4119-0015 $37.50

120 4119-0004 $28.00 4119-0010 $33.25 4119-0016 $37.50220 4119-0005 $28.00 4119-0011 $33.25 4119-0017 $37.50300 4119-0006 $28.00 4119-0012 $33.25 4119-0018 $37.50

Diamond tool that gives an antique effect and enhances the natural color. Suitable for machines working on marble, and stones.

Snail-lock

Granite City Tool is your first stop for texturing your edges and full slabs!

Looking to make brushed, antiqued, leather, velvet, silk or caress textures?

We can help!

Call Today!

To ManyTo List!

Airflex diamond brushes are used on existing tools that are use everyday in fabrication shops. Airflex brushes removes the “soft” material creating a beautiful texture while enhancing the natural color in the stone. Tenax produces Airflex in different styles, bonds and grits to create an Antique finish all the way up to creating a beautiful smooth caress finish with magnificent detail. Perfect for granite, marble and Engineered stone .

• Create an Antique finish

• Create Style

• Create a market before the competition does

• Create a Caress finish with a gloss

• Create extra business

• Create uniqueness


Machine P

olishing

94

94

macHINE EDgE POlIsHINg

Twincur 5” EG-S -Granite-

Twincur Resin 4”

Twincur 5” EG -V -Granite-

Twincur Resin EB

Alpha’s innovative new product designed specifically for the monument industries top and edge polishing machines. Has a flexible matrix that offers just the right amount of flexibility for easy polishing of serpentine tops. 5” diameter with Q.R.S backing.

Made for straight and bevel edge polishing with automatic edge polishing machines, single or multi-head. These wheels are unique in that they only require up to the 3000 grit to successfully polish the edge. 5” diameter with Snail-lock backing. Used on: Bremor, Commandulli, Park Industries, Marmo Meccanica, Loffler and others.

These revolutionary wheels convert your automatic edge-polishing machine into state of the art high production equipment. A wide range of grits and variable bond types let you master any demanding application where a good quality finish is required in a short amount of time.

The newest product from Alpha® for engineered stone. The EB has been thoroughly tested and has outperformed many competing brands and is now recommended by a leading manufacturer of edging machines. If you work with engineered stone/quartz surfacing and you want the perfect bullnose edge, then the Twincur EB is the abrasive for you.

PARK APPROVED

Twincur Resin GB 4”

Perfect for granite!

Twincur GB were specifically developed to polish bullnose edges of granite using automated edge polishing machinery.

Snail-lock

Grits Item # Price80 4106-0071 $66.11150 4106-0072 $66.11300 4106-0073 $66.11500 4106-0074 $66.111000 4106-0075 $66.112000 4106-0076 $66.113000 4106-0077 $66.11

Grits Item # Price80 4106-0064 $77.11

150 4106-0065 $77.11300 4106-0066 $77.11500 4106-0067 $77.111000 4106-0068 $77.112000 4106-0069 $77.113000 4106-0070 $77.11

Grits Item # Price100 4114-0121 $116.07200 4114-0122 $116.07500 4114-0123 $116.07

1000 4114-0124 $116.072000 4114-0125 $116.073000 4114-0126 $116.07Black 4114-0127 $116.07White 4114-0128 $116.07

Grits 4” Price 5” Price 6” Price200 4116-0030 $67.46 4116-0047 $79.81 4116-0091 $125.67500 4116-0031 $67.46 4116-0048 $79.81 4116-0092 $125.67

1000 4116-0032 $67.46 4116-0049 $79.81 4116-0093 $125.672000 4116-0033 $67.46 4116-0050 $79.81 4116-0094 $125.673000 4116-0034 $67.46 4116-0051 $79.81 4116-0095 $125.67

Grits 4” Price200 4116-0052 $98.84500 4116-0053 $98.84

1000 4116-0054 $98.842000 4116-0055 $98.843000 4116-0056 $98.84


95

Mac

hine

Pol

ishi

ng

95

macHINE surfacE POlIsHINg

Drainboard Polishing SystemFor Radial Arm and CNC

Slabmaster™ Radial-Arm System

These diamond and P.B.S.® brand drainboard tools are designed for shaping and polishing granite drainboards.

The Slabmaster™ brand system is a quick, cost effective solution to the problem of retrofitting a radial arm machine with a diamond polishing system. All that is needed is for you to drill 2 holes in your existing drive head. This system will enable the machine operator to produce a top quality finish (factory or better) on granite and marble much faster and easier than by using bricks.

Straight-Edge™

For polishing straight edges, the new Straight-Edge™ (with snail-lock) brand diamond discs deliver a better finish with fewer passes than any other tool. Ideal for edges 3/4” or thicker, they eliminate scratches and leave a perfectly flat, polished edge.

Summit WheelsAlpha’s three part system redefines the meaning of production. Heavy duty metal-bond grits remove deep scratches evenly so you can work on the back side of slabs or sawn surfaces on monumental blocks. Then sleek resin-bond grits put an unparalleled degree of polish. Final polisher brings that beautiful inherent color and reflection.

Metal-Bond

FinalPolisher

Resin-Bond

4” with Snail LockGrit Item # Price

X Coarse 1910-0017 $176.001 1910-0018 $305.952 1910-0019 $166.503 1910-0020 $166.504 1910-0021 $128.505 1910-0022 $128.50

8”, Granite Only 10”, Granite/Marble Only

Grit Item # Price Grit Item # Price1 4114-0061 $230.00 1 4114-0200 $409.002 4114-0062 $230.00 2 4114-0070 $409.003 4114-0063 $202.00 3 4114-0076 $295.004 4114-0064 $202.00 4 4114-0077 $295.005 4114-0065 $202.00 5 4114-0071 $178.506 4114-0066 $205.00 6 4114-0072 $178.50

Buff 4114-0067 $178.50 Black 4114-0159 $98.00White 4114-0201 $90.80

4” (1/2” Hole)

Grit Item # Price1 4115-0001 $105.002 4115-0021 $105.003 4115-0022 $84.004 4115-0023 $84.00

Buff 4115-0024 $40.00

Grit 6” Price 8” Price 10” Price50 4114-0300 $211.65 4114-0190 $342.66 4114-0185 $433.2780 4114-0194 $211.65 4114-0139 $342.66 4114-0198 $433.27

200 4114-0195 $211.65 4114-0184 $342.66 4114-0149 $433.27400 4114-0196 $211.65 4114-0197 $342.66 4114-0199 $433.27200 4114-0133 $139.43 4114-0136 $201.23 4114-0135 $281.23500 4114-0131 $139.43 4114-0129 $201.23 4114-0130 $281.23

1000 4114-0141 $139.43 4114-0140 $201.23 4114-0144 $281.232000 4114-0132 $139.43 4114-0137 $201.23 4114-0145 $281.233000 4114-0142 $139.43 4114-0143 $201.23 4114-0146 $281.23Black 4114-0161 $187.33 4114-0167 $223.84 4114-0134 $336.18White 4114-0183 $187.33 4114-0191 $223.84 4114-0150 $336.18


Adhesives &

Epoxies

96

96

aDHEsIvEs & EPOXIEsrIval

RIVAL PolyesterResin Products

Madein U.S.A.Made

in U.S.A.

Extra Hardener

• Accepts polyester coloring to match stone colors and hide bond lines.• Smooth texture for a finish as smooth & brilliant as polished stone.• Neutral color blends well with a variety of stone colors.

RIVAL Acrylic Super Penetrating

RIVAL Travertine Spackle

• Very low viscosity penetrates fine cracks and fissures• Consolidates and strengthens weak or porous stone• Accepts polyester coloring to match stone colors and hide bond lines• Excellent for laminating stone on horizontal surfaces

• Smooth knifegrade consistency for filling, bonding & repairing travertine• Tinted adhesive matches the color of most travertine stone• Accepts polyester soling paste to adjust color

Colorants (1oz)for Polyester & Acrylic Adhesives

Call for more info.

and to order!

$3.35

Each

White, Black, Red, Red-Brown, Ochre,

Green, Blue, & Fawn Brown

Desc. Item # PriceTransparent Flowing - Quart 0303-0092 $11.95Transparent Flowing - Gallon 0303-0093 $39.95Transparent Flowing - 5 Gal 0303-0094 $139.95Transparent Knife Grade - Quart 0303-0095 $11.95Transparent Knife Grade - Gallon 0303-0096 $39.95Transparent Knife Grade - 5 Gal 0303-0097 $139.95

Small (1 oz.) 0303-0099 $2.20Large (4 oz.) 0303-0100 $3.00

Qt. 0303-0107 $24.00

Qt. 0303-0106 $19.25


97

Adh

esiv

es &

Epo

xies

97

aDHEsIvEs & EPOXIEs

Easy-Mix Dispensers

Edge System (TES)

Penetrating Epoxy RS (Rapid Set)

Colorantsfor Epoxies

The strongest adhesive bond available for stone lamination. This clear, flowing epoxy does it all. It’s water-clear, polishable, and unlike polyester and acrylic adhesives the Touchstone™ Edge System will not shrink. Lay down a thin, tight bond line, and bullnoses stay put. With Touchstone™ Edge System you never have to return to the job site to solve adhesive problems. Comes in sets of: Two-part A and One part B. Use with the Touchstone Easy-Mix Dispenser for perfect results every time. 2 hour set time at 70 degrees (heating will shorten time). Use Touchstone colorants or stone-dust to get the color match with the stone.

Touchstone™ Penetrating Epoxy RS has a 2-component water-like consistency. This very low viscosity product is developed for laminating, thin crack repair, and filling applications. Will not shrink. This exterior grade epoxy is

clear and has a fast set-up time. 1-2 hour set time @ 70°F.

Advantages:• 2 oz. and 8 oz. squeeze bottles• Liquid tints - easier mixing than paste tints• Squeeze bottles facilitate consistent color match• Even consistency throughout adhesive

Features:• Excellent stability• Rapid cure• Tack free in 10 minutes• Color consistent for color matching• Low shrinkage• Superior strength• Light cured film• Knife Grade

Polyester Resin

Extra Hardener1oz 0303-0077 $2.95

TOucHsTONE™

2 Qts (A), 1 Qt (B) 0301-0081 $88.002 Gal (A), 1 Gal (B) 0301-0119 $244.09

Dispenser with heater 0305-0004 $405.00

2 Qts (A), 1Qt (B) 0301-0076 $75.86 1 Qt. (B) 0301-0118 $35.952 Gals (A), 1Gal (B) 0301-0075 $219.00 1 Gal (A) 0301-0120 $106.00

Color 2 oz. Price 8 oz. PriceWhite 0301-0082 $6.95 0301-0115 $19.25Black 0301-0083 $6.95 0301-0099 $19.25Red 0301-0084 $6.95 0301-0159 $19.25

Red-Brown 0301-0085 $6.95 0301-0114 $19.25Blue 0301-0086 $6.95 0301-0160 $19.25

Yellow 0301-0087 $6.95 0301-0161 $19.25Brown 0301-0088 $6.95 0301-0110 $19.25Buff 0301-0089 $6.95 0301-0111 $19.25Gray 0301-0090 $6.95 0301-0112 $19.25

Green 0301-0091 $6.95 0301-0113 $19.25

10 Color (2oz)Tint Kit

(white, black, red, red-brown, blue, yellow, brown, buff,

gray, green)

0301-0092 $60.00

Qt. 0303-0061 $12.57


Adhesives &

Epoxies

98

98

aDHEsIvEs & EPOXIEsTOucHsTONE™

Waterjet Epoxy Clear Gel Epoxy

Express IIFlowing Epoxy Penetrating Epoxy

This high-strength 2-part adhesive is designed for bonding intricate assemblies of cut stone, inlays, and stone-on-metal projects. Waterjet epoxy forms a thin, tight bond for seamless joints involving variations in granite, marble, and tile. Available in quarts. The mix ratio is 2:1 by volume. 2 hour set time at 70°F

This epoxy is handy for joining countertops or laminating edges. The consistency of this knife-grade epoxy allows you to squeeze out thin bond lines, so that clamping doesn’t produce a mess of displaced adhesive. Easily tinted for true colors Clear Gel delivers high bond strength, is polishable, and sets up fast. Applying heat shortens set time. Touchstone Clear Gel Epoxy is a versatile product, it works great as a patching compound too.

Touchstone™ Express Flowing Epoxy is a two-part transparent epoxy that sets up in 45 to 60 minutes at 65°F and will enable the fabricator to work on the edge in half the time it takes for most epoxies.

Touchstone™ Penetrating, a low viscosity penetrating epoxy along with our mesh backing, will create effective reinforcement of your slab or countertop. This product penetrates the structural fissures of granite and marble and will adhere the mesh to the stone for added strength and integrity.

Dries completely clear and delivers high bonding strength is polishable and sets up fast. Knife-grade consistency. Accepts Touchstone colorants. For interior and exterior applications on: granite, marble, natural, and engineered stone. This smooth, Vaseline-like epoxy is ideal for joining countertops, laminating edges, repairing monuments, stone tiles, etc. Set time 2 hours at 75 degrees. Cure time 24 hours.

Clear Gel Epoxy

2Qts (A) 1Qt (B) 0301-0102 $71.75

600ml Cartridge 0301-0142 $31.07Dual Cartridge gun 0305-0028 $68.95

Large Applicator Tube 0305-0008 $2.60

2 Qts (A), 1 Qt (B) 0301-0276 $88.002 Gal (A), 1 Gal (B) 0301-0274 $272.95

2 Qts (A) 1 Qt (B) 0301-0080 $93.502 Gal (A) 1 Gal (B) 0301-0146 $365.58

Flowing 2 Qts (A), 1Qt (B) 0301-0076 $75.86Knife-Grade 2 Qts (A), 1Qt (B) 0301-0079 $83.21Knife-Grade 2 Gals (A), 1Gal (B) 0301-0077 $235.17


99

Adh

esiv

es &

Epo

xies

99

aDHEsIvEs & EPOXIEs

Developed to provide both structural support and filler qualities on all types of stone. Made to withstand outside elements without changing properties or discoloration. Can be used with coloring paste to match with stone colors.

These products consist of a two-part resin and hardener that have a quick set-up time and create a strong, durable bond that can be polished to a high gloss finish. Resins available in knife-grade or flowing: Clear, Transparent, White, Black, and new, super clear Platinum. (Not for structural support).

1 OZ. TubesEpoxy colors

Resin colors

Extra Hardener

Color Paste Kits

Polyester Resin Products

Akepox Adhesives

1 OZ. Tubes

akEmI®

Size Desc. Item # PriceGAL RESIN 4500 Knife-grade 0303-0059 $102.74GAL RESIN 4500 Flowing 0303-0027 $98.28LT 1000 TRANS Knife-grade 0303-0022 $23.42LT 1000 Transparent Flowing 0303-0018 $22.13

10 LT 1000 Transparent Flowing 0303-0086 $178.37LT 1000 Platinum Flowing 0303-0089 $27.00LT 1000 Platinum Knife-grade 0303-0023 $26.60

10 LT 1000 Platinum Knife-grade 0303-0088 $176.70LT LITER BUFF Knife-grade 0303-0025 $23.42

900 ml H20 CRYSTAL CLEAR Knife-grade Translucent 0303-0074 $27.75

900 ml H20 CRYSTAL CLEAR Flowing Translucent 0303-0020 $27.75

900 ml Acrylic - Tan 0303-0026 $44.49

Small (20G) Liquid 0303-0004 $4.25Small (30G) Paste 0303-0003 $4.25

Large (150G) Paste 0303-0014 $16.77

Size Desc. Item # Price1.5 kg 2000 Transparent Flowing 0301-0051 $64.74750 g 2040 Epoxy Paste - Knifegrade 0301-0054 $29.00

2.25 kg 2010 Transparent Knifegrade 0301-0052 $89.02

Color Item # PriceRed 0303-0005 $6.00

Red-Brown 0303-0006 $5.35White 0303-0007 $5.35Black 0303-0008 $5.50Ochre 0303-0009 $5.35Green 0303-0010 $5.35Brown 0303-0011 $5.35Blue 0303-0012 $6.00

Assorted 0303-0024 $44.25

Color Item # PriceRed 0301-0003 $6.00

Red-Brown 0301-0010 $6.00White 0301-0005 $5.35Black 0301-0006 $5.50Ochre 0301-0007 $5.35Green 0301-0008 $5.35Brown 0301-0004 $5.35Blue 0301-0009 $5.35

Assorted 0301-0042 $44.25


Adhesives &

Epoxies

100

100

aDHEsIvEs & EPOXIEsTENaX

Used to increase the shine in onyxes, marble, natural stones, granite, agglomerates and terrazzo. It also can brighten up stones that have lost their shine. Cera TeWax is the result of pure and white waxes, dissolved through solvents. It allows high penetration levels on treated material leadingto a long-lasting effect.

Pectro Black and Pectro Clear were developed to hide microfissures, ”Spiderwebs” and natural defects in granite. Pectro Clear works best on light colored granite (yellows, whites, and light blues) and Pectro Black works best for dark granites (black, brown, greens, etc). Apply with cloth and get an instant result.

• Appearance: Liquid • Drying time: 5 minutes • Effect: Immediate

To fill marble, stone, travertine and agglomerate with medium-large holes.

TeWax

Pectro Black and Pectro Clear

Travertine Filler Epoxy

Extra Hardener

Crystal Clear

Extra Hardener

Liter 0301-0264 $25.95

Small (45ML) 0301-0265 $3.00

Glue used to laminate, bond, repair and fill marble and engineered stones, adding security and durability. We suggest to using Crystal in rich marbles and stones like onyxes and carrara when the gluing must be hidden.

Comparable to Pamirwax

Polytenax

Polytenax Knife Grade is a premium mastic for gluing, laminating and joining seems of marble, granite, and quartz surfaces. Its main characteristics are a very strong bond in a in a very short time (even in winter!). It cures smooth, shiny,and easy to polish. Cures fast, colors great, and is stronger than traditional polyesters. Recommended for interior use.

TEPOX V is a special chemical color liquid used to color epoxy resins, AGER, AGER TIGER, OR PETROLUX. Recommended to achieve a good penetration of the color in the stone. Also used to restore or enhance the color and tone of stones. Perfect for color matching edges of resined stone. Designed for both indoor and outdoor applications.

Tepox V

Liter 0301-0178 $11.30

Liter Clear 0706-0012 $12.95Liter Black 0706-0009 $12.95

Liter Clear 0706-0011 $27.70Liter Black 0706-0010 $27.70

Small (45ML) 0303-0076 $2.25

Size Color Item # PriceLiter Black 0301-0327 $63.15Liter Brown 0301-0339 $63.15Liter Green 0301-0342 $63.15Liter Red 0301-0340 $63.15Liter Yellow 0301-0341 $63.15Liter Blue 0301-0338 $63.15Liter Gold 0301-0344 $63.15

Liter 0303-0090 $18.904 Liter 0303-0104 $76.10


101

Adh

esiv

es &

Epo

xies

101

aDHEsIvEs & EPOXIEs

Fast-Set™ 41 Epoxy

Developed to fully comply with the requirements of ASTM C-881. Use either to excellently bond concrete to itself, bond new concrete to old, or bond concrete to other construction materials. Medium-high viscosity. Permanently “weld” cracks back together.

Fast-Set™ Extreme Epoxy

The Extreme is similar in properties to the Fast Set™ 41 except for the viscosity which is knife grade (like Vaseline) consistency. This is also a structural strength epoxy adhesive for most stone applications involving the restoration and the assembly of stone. The Extreme is ideal for job-site repairs, and the assembly can be moved within an hour (@ 75° F). This system allows for vertical, tight bonded assemblies. The standard buff color allows for matching most limestone color tones. Bonstone colorants may be used for on-site color matching if needed.

Fast-Set™ is a two-part high performance epoxy adhesive used mainly for fast setting applications of stone. A great attribute of FAST-SET™ is the low temperature cure profile. This mercaptan epoxy is ideal for fast setting and cures at below freezing temperatures. Applications include: laminating stone to other construction materials, stone patching and mending, and stone to stone bonding. For exterior use due to odor. 20-30 minute set time at 70°F

(1A + 1B) Quarts

(1A + 1B) Quarts

Cream 0301-0100 $54.95

Buff 0301-0180 $54.95250ml can be used with

a standard caulk gun.

Crack Repair 31™ DURO-POXI

Bonstone DURO-POXI is a convenient 1:1 ratio knifegrade epoxy adhesive developed for horizontal or vertical surfaces.

Ideal for: • Bonding concrete, masonry, and stone • Laminating stone to other construction materials • Bonding stone to stone • Structural patching concrete • Setting stone pavers and tiles.

bONsTONE®

Product Item# PriceDual 600ml Cart. 0305-0007 $38.40

Dual Cartridge gun 0305-0028 $68.95Large Applicator Tube 0305-0008 $2.60

Product Item# PriceSingle 250ml Cart. 0301-0271 $28.57Dual 600ml Cart. 0301-0293 $38.40

Dual Cartridge gun 0305-0028 $68.95ProTip Mix Nozzle 0305-0020 $2.60

Dual 50ml Cart. 0301-0331 $12.9650ml Adapter 0305-0031 $3.55

Product Item# Price450ml Cart. 0301-0260 $33.50 1 Qts (A) 1 Qt (B) 0301-0347 $56.98

1 Gal (A) 1 Gal (B) 0301-0319 $197.03


Adhesives &

Epoxies

102

102

aDHEsIvEs & EPOXIEs

Imprepox 3M Adhesives

Bellinzoni Imprepox is a thermo-hardening, at very low temperature, viscosity resin based product reticulated with epoxy specific hardener at room temperature to be used as hard protective coating. Makes the stone stronger and closes the capillaries and micro-cracks with a completely clear coating. Thus, the slab feels smooth and looks like it has a glass surface. It is completely transparent and will not turn yellow. Ideal to fill and seal very clear on all marbles or granites.

For quick applications, dries faster than brush-on filler. Use on unusual materials and irregular surfaces.

No. 94 Tape Primer: Improves the bonding strength of tape to concrete, wood, and metal surfaces.

No. 77 Aerosol Adhesive: Low mist spray adhesive improves bonding strength to mostly any surface. For extra strength, spray both surfaces.

EASYPOXY® EpoxyCompatible with most materials and made to exact industrial standards, Easypoxy can be used to bond granite, marble, ferrous and non-ferrous metals, wood, glass, ceramics, most hard plastics, concrete, plaster, hardboard, and many other materials. Easypoxy comes in convenient kits containing extra large flexible tubes of base and hardener with mixing boards and spatulas. Squeeze equal length beads from each tube onto mixing board and mix. Cures in 24 hrs. 5oz kits.

RIVAL Sink Clip Epoxy

• 2 component room temperature cure epoxy adhesive• Thixotropic product suitable for gap-filling • Fast setting product suited to reduce assembly time• Excellent mechanical performance

T-2000 Tile Epoxy Setting Adhesive

T-2000 tile-setting epoxy forms a thick epoxy bed that allows you to adjust tile, stone, or countertops onto uneven surfaces. This super knife-grade epoxy is also smooth enough for troweling. Exceeds ANSI-A-118.3 requirements. Available in gallon units.

0301-0078 $68.00

1-1/2 Qt. 0301-0058 $76.00 Type Item # Price#94 5506-0020 $9.28#77 0304-0006 $14.95 #94 5506-0034 $13.95/25pksingle use ampules

Color Type Item # PriceClear K-20 0301-0025 $23.50

Lt Amber K-45 0301-0035 $24.90Black K-22 0301-0182 $24.50

The easiest system on the market for stone repair. No mess and cleanup as the hardener and epoxy is mixed right in the nozzle. This system ensures that you will always get the proper mixture for optimal structural support.

3M EPX Scotch Weld

Clear 1.7 oz 0301-0031 $15.70Grey 1.7 oz 0301-0027 $16.20

Applicator 0301-0041 $58.49Mix Nozzle 0301-0026 $18.50

Plunger 0301-0001 $6.4912pk

30ml cart. 0303-0108 $4.75


cases include 12 tubes

103

Adh

esiv

es &

Epo

xies

103

aDHEsIvEs & EPOXIEs

Glue Stirring SticksMeasuring Cups Glue Spreaders

Plastic 4” wide. Sold in Boxes of 100

Pour SpoutsScrim Mesh

36” x 150’ Roll 0305-0001 $96.11

Slab and countertop mesh reinforcement.

100% silicon and can withstand heat up to 400°! Water resistant!

RIVAL Silicone Sealant

Madein U.S.A.Made

in U.S.A.• For commercial, industrial and residential use • Permanently flexible • Excellent adhesion • No cracking, shrinking or chalking

Heavy Duty Caulking Gun

Rotating Head

50 Pack 0305-0005 $8.50

Box 500 0305-0012 $8.50

Box 100 0305-0017 $28.95

Item# Color Price Ea.0301-0294 Clear $2.990301-0295 White $2.990301-0296 Beige $2.990301-0297 Black $2.99

Quart 0305-0003 $6.00Gallon 0305-0002 $6.50

10.3 oz 0305-0030 $19.95


VOCStone C

are & R

epair

104

104

sTONE carE & rEPaIrrIval

RIVALPorous Stone Impregnator

RIVALPremium Impregnator

Water BasedThis protective treatment is composed of special silicones, and it prevents water from penetrating into the stone surface. This repellent effect simplifies every-day cleaning. Slip resistance and the stone’s ability to breathe is not affected. Suitable for indoor and outdoor use.

This protective treatment is environmentally friendly (water based) and ready to use. Composed of special polymers, it largely prevents oil, grease and water from penetrating into the stone surface and leaving stains. This repellent effect also simplifies every-day cleaning. Slip resistance and the stone’s ability to breathe is not affected. Suitable for indoor and outdoor use.

Size Item # Price1 liter 0710-0353 $26.955 liters 0710-5353 $113.99


RIVALPremium Impregnator

RIVAL (matte)Color Intensifying

ImpregnatorThis protective treatment is quick and easy to apply, and it prevents water, oil and grease from penetrating into the stone surface. The repellent effect simplifies every-day cleaning. Slip resistance and the stone’s ability to breathe are not affected. Suitable for indoor and outdoor use.

This protective treatment enhances the natural color of all rough natural stone surfaces without producing any gloss. It prevents water from penetrating into the stone surface. The repellent effect simplifies cleaning. Slip resistance and the stone’s ability to breathe are not affected. Suitable for indoor and outdoor use.



RIVAL (gloss)Color Intensifying SealerThis treatment enhances the natural color of rough natural stone surfaces by forming a hard-wearing protective film. This glossy film prevents water and oil from penetrating into the stone surface. The repellent effect simplifies cleaning. Suitable for indoor use only.



RIVALHeavy Duty

Stone Polish

Madein U.S.A.Made

in U.S.A.

• Can also be used on stainless steel, brass, and chrome.• Do not use on walking surfaces.• Resists fingerprints and smudges.• Comes in 13.5 oz. spray can.• NSF Approved (safe for food and you)• Contains no CFCs

- CLEANS - - POLISHES - - PROTECTS -

cases include 12 cans

x1 0706-0041 $12.95x12 6001-0414 $74.99

105

Sto

ne C

are

& R

epai

r

105

sTONE carE & rEPaIrrIval

RIVALCement Residue and

Rust Remover

RIVALHeavy Duty Cleaner

This special acidic cleaner is ideally suited for removing all anorganic dirt deposits, such as cement and mortar residues, lime scale and water marks, rust and rust discoloration. Suitable for acid resistant stone only.

This special cleaner is ideally suited for occasional deep cleaning or for the final cleaning after construction. Removes all kinds of heavy dirt and can even be used to remove cement residues from marble and other sensitive natural stones.



RIVALMaintenance Cleaner

RIVALMaintenance

Spray CleanerThis special cleaner is ideally suited for every-day maintenance cleaning. It does not form any layers, but instead leaves care components within the stone making it more color intensive and more resistant over time. Due to the high concentration, this cleaner is also economical to use.

This special cleaner is ideally suited for every-day maintenance cleaning of all small natural stone surfaces. It does not form any layers, but instead leaves care components within the stone making it more resistant over time.


Size Item # Price500 ml 0703-0111 $10.95


Stone C

are & R

epair

106

106

sTONE carE & rEPaIr

ResinSil

ResinSil gives 100% water+stain protection on epoxy resined materials. ResinSil is also approved for food contact.

The Marble Refinisher Kit

This amazing liquid & powder acid/abrasive compound will actually polish, or repolish, dull and/or scratched/scuffed marble and bring the shine to a factory finish. Saves several steps on repolishing and lasts much longer than liquid polishing dull marble. It saves you money and time! Use by hand or machine.

The Ager Tiger is suitable to darken up the color of exotic resined granite. Sometimes these granites are darker then normal due to the kind of epoxy resin used in the manufacturing process. Ager Tiger will match the color of the lighter edge with the surface in just one or two applications.

Tenax Ager is generally applied to sanded or smooth surfaces to give the stone a wet look. It can also be applied to polished surfaces to enhance color. Suitable for indoor or outdoor use on stones of all types including marble and granite.

Ager Tiger Ager

This poultice is the best possible product to remove deep seeded rust stains from stone.

Sub-surface cleaner removes stains from deep within the pores without scrubbing!

Rust Poultice Stain Remover Poultice

Graffiti Gone A and B

Biodegradable cleaner effectively removes graffiti; ink, paint and grease. Effective on many porous and non-porous surfaces. Contains no harsh solvents or acids and can be neutralized with water. Graffiti Gone A is best for all granite and hard stone surfaces. Graffiti Gone B is best for concrete and porous stone surfaces.

Formulated to brighten the color and brilliance of dark stone and aids in restoring the luster to faded black granites. Can be used before etching for greater contrast and will hide scratches, scuffs and imperfections on polished surfaces. 1 pint containers.

Black BeautyGCT

0706-0033 $59.00

0702-0002 $45.00

0706-0008 $57.000706-0037 $76.95

0707-0001 $19.000703-0007 $19.00

Type Pint Price Quart Price Gallon PriceGraffiti Gone A 0705-0003 $14.50 0705-0007 $25.00 0705-0006 $79.50Graffiti Gone B - - 0705-0002 $15.00 0705-0005 $49.50

4102-0003 $59.85


Stone Care Kit

SuperSeal: Provides an invisible barrier by filling all of the pores in the stone, protecting your natural stone from permanent damage. Stone Polish: Keeps stone surfaces looking brilliant as the day they were installed.

MultiStone Clean: A heavy duty concentrated pH neutral stone soap designed for disinfecting and deep cleaning all stone surfaces.

The ideal alternative to traditional polishing of granite, marble, and natural stone surfaces. Use for sprucing up difficult to polish areas such as ridges, corners, edges, touch-ups, etc. Solvent based formula coats and penetrates for long lasting shine on exterior or interior surfaces. After the 1st coat dries, a second coat may be applied to intensify the shine. Buffing with a wool or felt pad will give you the best end result. Available in 24oz spray.

Jet Auto Polish

0702-0010 $16.250706-0038 $16.00

107

Sto

ne C

are

& R

epai

r

107

sTONE carE & rEPaIr

Darkener Polishing Fluid Stone PolishBrightens the color on polished, dark stone surfaces, and covers scratches and hairline cracks.

Brings shine and enhances the color, fast drying, and improves freeze/thawing properties. For interior use only.

Cleans and renews the brilliance of polished stone. Protects from staining and is water-repellent. For interior and exterior use.

General Stain Removers Alpha® Stain Remover is an easy to use dry poultice which is very effective in removing a variety of stains. Just mix with water to form a paste and then apply over the surface of the stone. No scrubbing required so surfaces retain their original finish.

MP-7 RustRemover

One of the best rust removers we have found. Contains acid, yet can be used safely on granite or marble. It’s also very effective on concrete. 1 gal. containers only.

Rust Stain Remover

Alpha Professional Tools® leads the way with an innovative product designed to quickly remove common rust stains. In most cases, the RSR-2000 will completely remove a rust stain within 5 minutes or less.

Pumice BricksUse to clean and refresh marble. Removes surface dirt and restores the original appearance quick and easy. 5-3/4” by 2-3/4”.

GCT

Qts. 0710-0062 $46.45 Qts. 4102-0002 $21.39 250ml 4102-0001 $8.67

Item # Type Price0711-0001 POULTICE “GENERAL” 5lb $37.520711-0004 POULTICE “RUST” 5lb $40.13

0703-0012 $31.00

Item # Type Price0711-0006 RUST GEL 14 oz $41.33

0709-0001 $9.00


GCT

Stone C

are & R

epair

108

108

sTONE carE & rEPaIr

Environmentally safe and easy to use pre-mixed cleaner. Most effective on the market for cleaning granite or marble. Removes dirt, grime, oil, rust, grease and sap stains, and other discolorations which plague memorials. Can be used safely around flowers, shrubbery, grass, etc. Is harmless to the hands and is environmentally safe.

A very effective granite cleaning acid. Works well for removing board stains. Can be used with crystals on tough stains. Will darken light colored granites if allowed to penetrate. Available in 1 gal. containers.

Nu-Stone2 Tiz Two

Stone Clean Oxalic Acid Easy to use crystal cleaner is one of the most effective on the market for cleaning granite and for removing dirt, grime, and most common stains. Available in any quantity from 1 lb. and up.

A good, low priced crystal cleaner for cleaning soiled, grimy granite. Also used as an aid in polishing marble. Available in any quantity from 1 lb. and up.

GCT

Last Patch™ Limestone / SandstonePatching Compound - Buff Select

for Interior and Exterior Aesthetic RepairLAST PATCH™ patching compound for limestone or sandstone camouflages its patchwork by absorbing water just like the porous stone surrounding it. Use it when you need less noticeable repairs on porous stone. Set times: 15-25 minutes. UV Stable.

Qt. 0301-0093 $34.95

7” Patch SticksColor Item # Price

New Fontana 0702-0058 $3.99Lt. Walnut 0702-0057 $3.99

Walnut 0702-0056 $3.99Med. Tan 0702-0055 $3.99

Ex. Dk. Walnut 0702-0054 $3.99Lt. Trans. Amber 0702-0053 $3.99

Carmel Umber 0702-0052 $3.99Amer. Green 0702-0051 $3.99

Lt. Almond 0702-0050 $3.99Water Clr. Trans 0702-0049 $3.99

Black 0702-0048 $3.99White 0702-0047 $3.99

Produce the burn-in repairs you have always wanted, offering excellent melt and flow characteristics.

0703-0018 $49.95 0703-0046 $38.50

0703-0001 $3.95/lb.0703-0002 $3.80/lb.

Paste Wax

Stone PolishA high grade wax for marble, granite, and travertine. Special Preparation is a quick drying formula that penetrates the material giving the stone a long lasting sheen and deepens color. Not to be used on floors.

Stone Polish is specially designed to clean, polish and maintain marble, granite, and quartz stone. Stone Polishis perfect for daily cleaning of counterops and bathroom vanities. Eliminates water spots. Not for use with very porous or rough surfaces.

12 oz. 0706-0013 $11.00

Color Item # PriceBlack Wax 1.3kg 0706-0031 $19.00Clear Wax 1.3kg 0706-0032 $15.50


109

Sto

ne C

are

& R

epai

r

109

sTONE carE & rEPaIr

Last Patch™ Gel Tubes A & B

“Chip & Fill Kit™”

Last PatchCatalyst

1/2 oz

Powder Tints are available in the following 7 colors:

Stone Dust is available in the following 7 colors:

• 7 Colors of Granite Dust• 7 Colors of Powdered Tints• 2 Pumice stones • 1 Razor scraper • 20 Single edge blades • 48 Mixing cups • 80 Mixing sticks • 2 Tubes of Last Patch (A) • 2 Tubes of Last Patch (B)

Contents:This convenient kit features easy repair and color matching for granite, marble, and limestone surfaces. It’s also ideal for polished, honed, frosted, or chiseled surfaces. Removes unsightly chips and scratches on stone surfaces.

For even faster set time, use our Accelerator. Accelerator is not recommended for work over 85°F.

This kit features the “Last Patch™ Gel” U.V. stable patching compound, an assortment of seven colors of granite dust, & seven colors of powdered tints plus mixing & application tools. Everything you need to professionally restore virtually any stone job is at your fingertips!

Natural Stone Repair KitThis unique and convenient kit was developed for the restoration and repair of granite, marble, and limestone surfaces. This kit enables you to create most on-site color, replication of your stone. This kit features the Last Patch Gel - UV stable patching compound, an assortment of three liquid tints plus mixing & application tools.

• Crack repairs• Countertop repairs• Floor & tile restoration• Fast Setting: 20 minutes• UV stable• Patch holds up through severe climate changes

Applications include:

bONsTONE®

0301-0137 $174.00

0301-0141 $7.95

Tubes A & B 0301-0069 $10.50Color Item # PriceWhite 0301-0132 $6.59Yellow 0301-0129 $6.59Gray 0301-0130 $6.59Black 0301-0131 $6.59Rust 0301-0133 $6.59

Green 0301-0134 $6.59Brown 0301-0135 $6.59

KIT 6001-0254 $43.00

Color Item # PriceWhite Quartz 0301-0126 $6.59Red Granite 0301-0123 $6.59White Marble 0301-0127 $6.59Brown Granite 0301-0124 $6.59Black Granite 0301-0128 $6.59Pink Granite 0301-0125 $6.59Grey Granite 0301-0122 $6.59

KIT 6001-0255 $43.00

0301-0330 $35.45


Stone C

are & R

epair

110

110

sTONE carE & rEPaIr“HIDE a scraTcH”

“HIDE A SCRATCH” SYSTEM

A revolutionary new system developed to actually hide and make scratches in stone undetectable. Sold exclusively by Granite City Tool. Now you don’t need to re-polish a stone if you find scratches after buffing or get scratches during transporting. Imagine the time and money you will save by not having to redo a job. This is a must for every fabricator. Call us for details on how easy this system works. All the components below are not needed for every job. Instructions are included.

bEfO

rEaf

TEr

Num Description Item # Price1 5 Min Quick-Set Epoxy 4oz 0301-0150 $6.992 30 Min Slow-Set Epoxy 8oz 0301-0153 $11.993 5 Min Quick-Set Epoxy 8oz 0301-0151 $11.994 30 Min Slow-Set Epoxy 4oz 0301-0152 $6.995 Scratch Remover - Super Thin 2oz 0302-0005 $8.996 Scratch Remover - Thin 2oz 0302-0001 $8.997 Scratch Remover - Med 2oz 0302-0002 $8.998 Scratch Remover - Thick 2oz 0302-0003 $8.999 Extender Tips - 12 pack 0305-0013 $1.60

10 Accelerator Spray - 2 oz 0304-0003 $4.9911 Zip Kicker Accelerator Spray 0304-0005 $18.9912 Extra Top and Cap 0305-0014 $.6513 Debonder 2oz 0304-0004 $4.99

Single Sided Razor Blades

apply scratch remover

apply accelerator spray

scratch off excess

GCT

2oz. Kit, Scratch Removers, Thin, Medium, Thick, and Accelerator Spray.

Best Quality

0305-0011 $3.95/Box 100

6001-0178 $30.00


Madein U.S.A.Made

in U.S.A.



Madein U.S.A.Made

in U.S.A.

Madein U.S.A.Made

in U.S.A.

50 P

acks

100

Pack

s

111

Sin

k N

eces

sitie

s

111

sINk NEcEssITIEs

Pneumatic T-31 Anchor Machine

• Ideal positive anchoring system for bottom mount sinks and back anchoring for structural facing. • All machines use standard shank bits for 3/16”, 1/4” and 3/8” size anchor slots.• Machines Shipped completely assembled with operation instructions and parts list.• Heavy duty pneumatic design.• Supplied with lightweight carrying case. • Corrosive resistance pivots for smooth operation. • Reversible cutting operation. • Alignment indicators on machine frame.

Sink Bowl

Stone

Sink ClipAnchor

See next page for parts

Electric T-31 Anchor Machine

Blue DiamondStainless Steel #31 Anchor Boltswith Nut, Washer and Lockwasher

Blue DiamondStandard Plated T-31 Bits

for cutting anchor slots

Standard, 3/8” Shank NON Standard, 1/4” Shank



Pneumatic 5208-0001 $986.00

Electric 5208-0008 $1,171.00

Pneumatic machines with vacuum pad require 18-20 cfm air at 90-100 psi.

4.5 Amp. 120V electric die grinder on electric models. Requires ground fault protection circuit. Supplied with GFI adapter plug. 21,000 RPM

The Original

Call for more information.

Diam. Length Item # Price3/16” 1 1/2” 5201-0014 $62.003/16” 2” 5201-0015 $65.003/16” 2 1/2” 5201-0027 $71.001/4” 1 1/4” 5201-0028 $65.001/4” 1 1/2” 5201-0025 $68.001/4” 1 3/4” 5201-0029 $71.001/4” 2” 5201-0030 $72.001/4” 2 1/2” 5201-0031 $75.001/4” 3” 5201-0032 $78.001/4” 4” 5201-0033 $111.003/8” 2” 5201-0034 $41.003/8” 2 1/2” 5201-0035 $55.503/8” 3” 5201-0036 $66.503/8” 4” 5201-0037 $75.503/8” 5” 5201-0038 $159.253/8” 6” 5201-0039 $292.50

Size Item # Price3/16” 4306-0034 $21.101/4” 4306-0035 $28.753/8” 4306-0036 $35.00

Size Item # Price3/16” 4306-0037 $24.801/4” 4306-0038 $32.153/8” 4306-0039 $49.95


Installs in minutes - saves money!

Madein U.S.A.Made

in U.S.A.

Sink CutoutReinforcement

Rods• Stainless Steel• 4’ x 1/8” x 1/2”

5201-0011 $8.00/ea.• Fiberglass• Bonds with adhesive• Use on arches and round tables

FiberglassReinforcement

Rods328ft Roll 5201-0066 $148.00100ft Roll 5201-0067 $53.50

Professionally installs undermount sinks, from stainless steel to cast iron, under any countertop surface.

• No shimming• No drilling• No sawing• No Gluing• No improvising!

The front to back allowsinstallations from 14” to 26”

The side to side allows installations from 25” to 47”

The offset side to side allows installations from 31” to 47”

Installs in minutes - saves money!

50 P

acks

Sink N

ecessities

112

112

sINk NEcEssITIEs

Blue Diamond Misc. Stainless Steel Anchors and Dowels

5201-0047

5201

-004

9 5

201-

0051

5201

-004

8

5201

-005

052

01-0

044

52

01-0

046

5201

-004

0

5201

-004

8

5201

-001

6

Dowels

Sink Setter Undermount Sink Installation Kits

5201-0076 $21.95

5201-0060 $32.95

5201-0059 $29.95

Front to Back

Side to Side

Offset Side to Side

Description Item # Price#1 - 1/8” x 1” 1-way strap anchor 5201-0040 $3.38

#2 sink clip anchor 2”long x 1”wd x 1/8” thick 5201-0016 $57.50#2A sink clip anchor 1 3/8” long x 1” wd x 1/8” thick 5201-0026 $1.15#2B sink clip anchor 1 1/2” lg x 3/4” wd x 1/16” thick 5201-0041 $5.10#2C sink clip anchor 1 7/8” lg x 3/4” wd x 1/16” thick 5201-0042 $4.68

#5 - 1/8” x 1 1/2” 2-way strap anchor 5201-0043 $3.85#7 - 1/8” x 1” 2-way strap anchor 5201-0044 $3.75“A” - 1/16” x 1” 1-way strap anchor 5201-0045 $2.10“B” - 1/16” x 1” 2-way strap anchor 5201-0046 $1.94

#30 Hairpin precast anchor 2” 5201-0047 $1.90“A” modified 1/16” x 1” 1-way strap anchor with slots 5201-0048 $2.43“B” modified 1/16” x 1” 2-way strap anchor with slots 5201-0049 $2.69

“M” 1/8” x 1” 1-way strap anchor with slots 5201-0050 $2.74“Z” 1/8” x 1” 2-way strap anchor with slots 5201-0051 $3.31


113

Sin

k N

eces

sitie

s

113

sINk NEcEssITIEs

Features and Benefits:• Allows undermount sinks to be placed before silicone starts to set up.• Eliminates the “rush” to get mounting hardware in position.• Most sinks can be installed by one person instead of two.• Works on kitchen and bathroom undermount sinks.• Rubberized to protect sink from being chipped or scratched.

• Easily undermounts any sink - including ovals and rounds• Use with solid surface or granite countertop materials• Eliminates the need for wood supports• Saves time, money and materials

• Fully adjustable and removable• 25”, 36”, and 50” lengths easily trim to fit any cabinet size• Use side to side or front to back• Hardware supplied for all installations (two undermounter packages are needed for ovals and rounds)

This tool allows you to install undermount sinks with ease. It will hold the sink in place so you can install the permanent mounting hardware. Perfect for using with our K-4 and K-6 undermount kits.

Sink Undermounter Kits

Undermount Sink Installation Tool

K-4 & K-6 Universal Sink Undermount KitsThe fastest and most versatile system invented for installing sinks.

K-4 Includes: • 1 Tube of Quick Set Epoxy• 4 Clips• 4 Bolted Anchor Plates• 4 Washers• 4 Wing Nuts• Instruction Sheet

K-6 Includes: • 1 Tube of Quick Set Epoxy• 6 Clips• 6 Bolted Anchor Plates• 6 Washers• 6 Wing Nuts• Instruction Sheet

Individual Tube of Quick Set Epoxy RIVAL Sink Clip Epoxy

30ml cart. 0303-0108 $4.75• 2 component room temperature cure epoxy adhesive • Thixotropic product suitable for gap-filling • Fast setting product suited to reduce assembly time • Excellent mechanical performance

5201-0023 $ 37.50/ea.

Size Weight per Set Item # Price25” 1.70 lbs. 5201-0007 $20.5036” 2.40 lbs. 5201-0008 $23.5050” 2.70 lbs. 5201-0009 $37.00

5201-0004 $18.00 5201-0005 $23.00

0301-0073 $8.50


Sink N

ecessities

114

114

sINk NEcEssITIEs

Made in USA from 22 gauge galvanized steel Accommodates virtually any dishwasher Easy installation under any type of counter top Can be installed prior to or after counter top installation Dishwasher does not have to be present at jobsite Won’t damage expensive cabinetry.Eliminates return trip by counter top installer to anchor dishwasher Saves time AND money!

Diamond Grip II and TSN Installation Tool

Lever action tool provides maximum setting power with minimum effort. Operating instructions included.

Drill 1/4” hole and insert your mounting nuts for easy setting!

No messing with glues

Description Item # PriceDiamond Grip II Tool 5201-0017 $96.00

Sink Mounting Nut Inserts 8/32” - 25 pk 5201-0052 $10.79

Diamond Grip II TSN Conversion Kit 5201-0022 $39.00

Granite Grabbers™

5201-0065 $4.95 ea. 5201-0075 $4.95 Set

Simple. Lasting. Secure.™A Revolutionary Solution for Quickly and Securely Installing Dishwashers Under Granite or Other Solid-Surface Countertops. Works on all Solid Surface Countertops!

AnchorsClips Dishwasher

Clips

ScrewsSinkStuds

DishwasherClips

Dimension: 3/8” dia. x 9/16” longThread: 10-24

Size: 10-24 x 1/2”

100 Pack 5201-0056 $52.00

100 Pack 5201-0074 $9.991 Pack 5201-0057 $.65

100 Pack 5201-0070 $30.00

50 Pack 5201-0071 $40.00 100 Pack 5201-0073 $3.8950 Pack 5201-0072 $35.00


115

Sin

k N

eces

sitie

s

115

sINk TEmPlaTEs

Sink Templates Types

Radius Set

Plastic Template Sheets

Plastic Template Sheets-Polystyrene

46” x 96” x .02”

Radius set includes these sizes:5/8”, 3/4”, 1”, 1¼”, 1½”, 2”, 2½”, 3”, 3½”, 4”, 5” & 6”

12pc. Polyurethane

SET

Item # Description Price4311-0023 Custom Design - $25/Template $25.00

Amer Standard Templates4311-0055 MDL #0496.011 Ovalyn $133.004311-0056 MDL #0497.012 Ovalyn $133.004311-0052 MDL #7103-000-208 $199.004311-0053 MDL #7145 $199.004311-0054 MDL #7179 $199.004311-0068 MDL #7502-000 $199.004311-0069 MDL #7507 $133.00

Blanco Templates4311-0059 MDL #501-106 $199.004311-0046 SUPREME MDL #510-106 $199.004311-0047 SUPREME MDL #510-887 $199.004311-0060 SUPREME MDL #510-887.25 $199.004311-0048 SUPREME MDL #511-620 $199.00

Elkay Templates4311-0043 MDL #ELU1111 $133.004311-0004 MDL #ELU1113 $133.004311-0044 MDL #ELU12B $133.004311-0045 MDL #ELU1316 $133.004311-0081 MDL #ELU2816 (1/8” Overhang) $199.004311-0008 MDL #ELU3118 $199.004311-0010 MDL #ELU3119 $199.004311-0009 MDL #ELU3119R/L $199.004311-0011 MDL #ELU3120 $199.004311-0080 MDL # ELU2816 $199.004311-0079 MDL #ELU2118 $199.004311-0076 MDL #ELUH-3119-10-L 3/16” $199.004311-0097 MDL #ELUH3621L (1/8” Overhang) $199.004311-0095 MDL #ELU2115 $199.004311-0087 MDL #ELUH2115 $199.00

Franke Templates4311-0049 MDL #RGX-120 $199.004311-0050 MDL #RGX-160 $199.004311-0066 MDL#PCX110-21 $199.004311-0065 MDL#PCX120R4 $247.004311-0063 MDL#UDSK900-18 $199.00

Kindred Templates4311-0104 UCL2233/90RK/E (1/8” Overhang) $199.004311-0037 UD1831/90RK/E $199.004311-0020 MDL #KSDCLU $182.004311-0029 US1813/70RK/E $133.004311-0161 US1719/90RK/E $199.004311-0040 US1925/90RK/E $199.004311-0070 US2123/90RK/E Overhang $199.00 4311-0021 $343.00

5203-0001 46”x96” $53.95/5pk

Cus

tom

Tem

plat

es A

vaila

ble

Item # Description PriceKindred Templates (cont’)

4311-0042 UT1941/90RK/E $249.004311-0073 UC2236/90RK/E $199.004311-0096 MDL #UC2132/90K/E w/ 1/8” Overhang $199.004311-0078 UC2132/90RK/E $199.004311-0075 US1925/90RK/E Undersize $199.004311-0074 UT1941/90RK/E Undersize $249.004311-0088 US1614/90K/E Undersize $133.00

Kohler Templates4311-0057 MDL #5834-3U $199.004311-0102 MDL# 5877 $199.004311-0005 MDL #2209 $93.004311-0006 MDL #2210 $93.004311-0034 MDL K2210 1/4” Reveal $133.004311-0027 MDL #2210 3/16” undersize $133.004311-0026 MDL #2210 PLUS .25 Overhang $133.004311-0007 MDL #2211 $93.004311-0035 MDL #2602 $133.004311-0036 MDL #2931 $133.004311-0022 MDL #3330/3331 $133.004311-0072 MDL #3332 $199.004311-0031 MDL #3336 $133.004311-0012 MDL #3350-52 $199.004311-0013 MDL #3352 $199.004311-0014 MDL #3353 $199.004311-0015 MDL #3354 $199.004311-0016 MDL #3355 $199.004311-0017 MDL #3356 $199.004311-0019 MDL #5898-4UT $199.004311-0025 MDL #5931 $199.004311-0061 MDL #5931-4U $199.004311-0032 MDL #2210 /w 1/8” Total Overhang $133.00

Moen Templates 4311-0064 MDL#25425 (undersize 1/8”-Normal) $199.004311-0051 MDL #22353/4 $199.004311-0033 MDL #22357/8 with/1/4” TL Overhang $199.004311-0067 MDL #22350 $199.004311-0024 MDL #22352 $199.004311-0001 MDL #22355/22356 $199.004311-0002 MDL #22358/22357 $199.004311-0003 MDL #22359/60 $199.00

Swanstone Templates 4311-0058 MDL # KSDB-3120 $199.00


SHS rails sold individually (not in pairs)

0 to 270° of rotation!

Lifting & H

andling

116

116

lIfTINg & HaNDlINg

The Sink Hole Saver™ by Omni Cubed is an innovativestiffening device that protects finished stonepieces from breaking during lifting, transport, and installation. The product is an ideal solution to strengthen countertops and backsplashes, especially fragile stone pieces. The Sink Hole Saver™ features mechanicalclamps, which stay secure to finished edges. Large, easy-grasp knobs make the clamps effortless and quick to tighten. The stiffening rail is very strong, yet light-weight, and features a convenient sliding channel for custom placement of each clamp. Sink Hole Savers can be applied in the shop and left on the countertop all the way to and through the install!

USA Patents Pending

Omni Cubed Sink Hole Saver™

SHS Angle Bracket

The SHS Bracket is used for safetransportation of angled countertop pieces.

The Lam-Clamp™ by Omni Cubed is a fabrication tool designed specifically for laminating natural and engineered stone. Lam-Clamps consistently outperform traditional clamping methods (i.e. c-clamps) in speed, seam quality, and durability. Clamping rates are 4 to 6 times faster. The longer lengths feature a spring-loaded holding claw, which keeps the clamp in place during stone alignment.

Omni Cubed Lam-Clamp™

PATENT USD597813USA PATENTS PENDING

OmNI cubED™

4 ft 2525-0002 $209.95 /ea.6 ft 2525-0001 $274.95 /ea.8 ft 2525-0012 $319.95 /ea.

2525-0030 $98.50 /ea.

Size Item # Price2’ 2525-0017 $139.953’ 2525-0018 $185.954’ 2525-0019 $234.956’ 2525-0020 $319.95

5” 10pk 2525-0015 $315.0010”10pk 2525-0016 $325.00

4cm

to 6

cm C

lam

ping


117

Lifti

ng &

Han

dlin

g

117

lIfTINg & HaNDlINg

• Works great for carrying thick concrete countertops• Enables 2 to 4 installers to lift and carry countertops safely • The more weight lifted, the tighter the clamp grips• Clamp designed to “hold onto” top when not in use and tension can be adjusted• Tear resistant, silicone rubber gripping pads won’t mark or stain surfaces• Comfortable foam rubber handle grips • High quality, precision-machined aluminum arms• Inexpensive replacement parts• One set includes two clamps and free carrying/storage case• 500 pound capacity per pair

PRO-CARTAT1

PRO-DOLLY™Seam Setter VC2

Great seams, without the hassle!

The Seam Setter VC2 is a worry-free solution for achieving high-quality seams. Large 6” cups handle heavy stone tops with ease. The powerful, yet compact, vacuum pump maintains pressure or all cups and operates on AC Power or a single 9V battery (for installations where electricity is not available).

2510-0044 $695.00

Mega-Jaw™ Carry Clamp

2507-0065 $259.95/set

Carry tops up to 2.6” thick!

2517-0019 $337.50/ea

2517-0016 $647.95

2517-0017 $165.00/set

2517-0018 $99.00/kit

Multi-TopAccessory

forPRO-CART

Folding Kit for PRO-CART

• Clamps to countertop, so you can pick it up over curbs, etc.• Lightweight aluminum construction under 50 pounds• All-terrain pneumatic casters easily handle gravel, dirt, grass, and curbs while dampening vibrations• Cart wheels can rest on stair treads• Compact design fits into tight spaces• Super maneuverability!• Ships via UPS, so there is no expensive freight charges• Optional Folding Kit upgrade available for convenient storage

Don't settle forcheap imitations,get the original,

made in the usa!

• Use alone or in pairs for moving very large and heavy countertops• Low-profile cart allows rolling of tall tops through doors• Flat-free tires reduce potential breakage caused by vibrations• Extremely stable; no worries of cart tipping over• Portable and lightweight cart (only 20 lbs)• Support rail features durable rubber padding to prevent chipping• No costly freight charges (ships UPS)• Clamps material thicknesses up to 69 mm (2.7 inches)• 750 pound capacity per dolly (1,500 for pair)

OmNI cubED™


Lifting & H

andling

118

118

lIfTINg & HaNDlINg

An inexpensive but valuable tool to join seams together on the counter top. One clamp every 2’ is recommended.• Size of cups: 4-1/2”• Min. Length: 7” • Max. Length: 11-1/3” For distance adjusting only

The purpose of this clamp is to hold the backsplash into place after gluing to the counter top and wall. Typically one is required for every two to three feet length of backsplash.

Comes complete and ready to use. Perfect for pulling non-porous surfaces together. Large counters usually need two pairs, one on each corner, for an even pull. The turnbuckle can be removed (leaving the plates) in order to use the cups alone as manual lift aids. All metal parts are nickel plated. The turnbuckle gives super fine adjustment so it will not break stone as competitive ratchet style horizontal seam setters do.

The easiest device on the market for joining and leveling the counter-top seams. Simply apply the powerful suction cups to the stone and ratchet the seams together, then pull forward the non-marring leveling cam and you’re done. No other device is this fast and convenient.

• Size of cups: 4-1/2” • Min. Length: 9-1/4” • Max. Length: 12” For distance adjusting only

Horizontal Seam Setter Vertical Backsplash Setter

Stone Pro Super Seam Setter Anver Turnbuckle Seam Joiner

Heavy Duty Suction Kit

2 x 7 ft. long with 12 Suction cups.Giving you the freedom of easewhen transporting stone.

Extra Cups

Cup Support System

• versatile• 100% adjustable• multi-functional design• safely move or set stone tops.

2510-0005 $189.95

2510-0007 $69.00 2510-0008 $68.00

2523-0001 $398.00

2510-0042 $389.00

2510-0041 $34.95

2510-0010 $599.00


Heat Strips

Heat Pad

Have you ever set a seam and come back a few hours later to notice it is uneven? Now you have to grind and re-polish which can take hours, not to mention an unsatisfied customer. Your friends at Granite City Tool have the answer, with our new silicon rubber heating strips. Heating strips give you a second chance to set the seam and save the job. To use them, you simply lay the strip over the seam, Plug into a standard 115V outlet, and in minutes it will heat up so you can pop the seam. They are available in two sizes: 25”L x 4”W and 35”L x 4”W. UR®, cUR® and VDE recognitions. Maintains approx. 165°F.

Under stone heating pad to

keep your H’Orderves

warm.

Surface will maintain approx. 165°F.

18” x 18” 5209-0016 $330.00

25” 5209-0014 $212.0035” 5209-0015 $255.00

Quick Jaw - Power Clamp & Spreader

THEN BUY THE BEST CLAMP AND SOLVE

THE PROBLEM:QUICK - JAW

3 MODELS AVAILABLE:• 12” Quick-Jaw: 8”-20” Spread• 24” Quick-Jaw: 8”-32” Spread• 36” Quick-Jaw: 8”-44” Spread

Size Item # Price12” Quick-Jaw 2507-0035 $17.0024” Quick-Jaw 2507-0036 $20.5036” Quick-Jaw 2507-0037 $24.50

119

Lifti

ng &

Han

dlin

g

119

lIfTINg & HaNDlINg

ROCK BLOCK

Made from non-poly composite and can have a 500 lb. load capacity.Can grip 3/4” to 1¼” Grips stone firmly.

To remove pull straight up as tilting will break the top.

Plastic spacer that serves to create an ideal space between slabs, whether 2 or 3cm, so a slab clamp can be easily inserted while keeping employees out of what OSHA calls the fall shadow zone. The Wedgee helps to prevent injuries and thus maintains OSHA compliance.

The Wedgee™ Safety Tool

• The Step Saver is Anti-Reversing• The Step Saver is for use on stairs.• The Step Saver Protects Thresholds & Stills.• Both Savers have Urethane Covered Rollers.• Both Savers are Used in Series.• Both Savers Protect Floors.• Both Savers Have a 5,000 lb. Capacity.

Step Saver & Floor Saver

2517-0020 $98.00 2517-0021 $295.00

2516-0131 $29.95 /ea.

1 2527-0001 $29.954 6001-0235 $100.00


NEW RUBBER GRIPPING ACTION!

Lifting & H

andling

120

120

lIfTINg & HaNDlINg

WOODS Hand Vacuum Cups Vacuum Suction Cup

4” Hand Suction Cups

8” 175 lb. lifting capacity, and 120 lb. GS loading capacity.

9” 264 lb. lifting capacity.

110 lb. lifting capacity, and 55 lb. GS loading capacity.

110 lb. lifting capacity.

45 lb. lifting capacity, and 22 lb. GS loading capacity.

4” Double Hand Suction Cup

N4000 - 8”

N5450 - 9”

Excellent for placing stone tiles and slab carrying using more Hand Cups to handle the weight. Both come with plastic carrying case.

N5450 Tough metal pump handle valve.150 lb. lifting capacity.

The DP Carry Clamps allow you to safely lift and carry your stone without hurting your back. Clamp design uses the weight of the stone to provide clamping action. That means the heavier the load, the more clamping action. Sold in pairs. Max opening: 1¾”

Carry Clamps Stone Pro Cross Carry Strap

Use your legs to lift

Shoulder the load for vertical or omni-directional movement.

8”

9”

N4000Tough lightweight Lexan pump handle valve. 125 lb. lifting capacity.

Excellent for placing stone tiles and slab carrying using more Hand Cups to handle the weight. Both come with plastic carrying case.

Standard Carry Clamps

• Used in pairs - sold in pairs.• Safely lift & carry your stone.• Save your back!!• The heavier the load, the more clamping action.

6cm Power Clamps

• Safely carry any stone up to 6cm!!• Will not rotate off stone.• Strongest Carry clamp in the Industry.• Lightweight with non-marring material.• Sold in Pairs.

2510-0002 $52.00

2510-0004 $87.00

2510-0027 $29.95

2510-0020 $15.95 2510-0021 $9.75

2510-0032 $42.00

2510-0033 $69.00

2507-0020 $239.002510-0013 $98.00

2507-0068 $289.00 2705-0064 $464.00


121

Lifti

ng &

Han

dlin

g

121

lIfTINg & HaNDlINg

MODEL M4APMax Sheet Size: Lifting and Tilting Stone Slabs 12 ft x 6 ft Pad size: 9” x 18”Load capacity: 1,500 LBS. Weight: 105 LBS.

Anver M4 Vacuum LifterAir Powered

2513-0029 $3,995.00

Shown with optional parking stands.

2513-0028 $3,995.00

2513-0023 $329.00Parking Stands (Pair)

Anver M4 Vacuum LifterElectric PoweredMODEL M4ELMax Sheet Size: Lifting and Tilting Stone Slabs 12 ft x 6 ft Pad size: 9” x 18”Load capacity: 1,500 LBS. Weight: 105 LBS.

aNvEr®


Madein U.S.A.Made

in U.S.A.

Mega Bridge SawPage 22

Lifting & H

andling

122

122

lIfTINg & HaNDlINg

Work Tables

96” x 72” CrankOperated Slab Table

• Heavy Duty 8” Rubber Swivel Cast Tires with Brakes - 500 lbs Capacity Each • Middle Stabilizer Bar on top is removable to use cart as a work table for sink cut outs • 55° - 80° Maximum Tilt with two 25° stops• Three slab holder wedges on 96” tables, and two on 72” tables.• 36” to 40” Height Adjustment • 1,500 lbs capacity

*All carts ship broken down for lowest cost shipping*

• Heavy Duty 8” Rubber Swivel Cast Tires with Brakes - 500 lbs Capacity Each • 80° tilt with two safety pin locks• Four slab holder wedges included• Middle stabilizer bar on top is removable to use cart as a work table for sink cut outs • 36” to 40” Height Adjustment • 1,500 lbs capacity

GCT

GCT

Enhanced 96” x 72” Crank Operated Slab Table with RollersGCT

TILT

• 1,500 lbs capacity• 4 - 8” omnidirectional locking casters• 80° tilt with two safety pin locks• Improved rollers with bearing for easy sliding.• Four slab holder wedges included• 29” to 40” Height Adjustment

TILTTIL

T

Butts right up to most bridge saws making your transitions easier and faster!

slab TablEs

2516-0044 $1,995.00

Size Item # Price96” x 24” 2517-0010 $695.0072” x 35” 2515-0020 $795.0096” x 35” 2515-0018 $895.00 96” x 48” 2515-0016 $995.00

2516-0135 $2,499.00

Madein U.S.A.Made

in U.S.A.

Madein U.S.A.Made

in U.S.A.


123

Lifti

ng &

Han

dlin

g

123

lIfTINg & HaNDlINg

Groves Transport Racks

Casters Wheels (optional)

• Fork lift hoops mounted on the sides.• Bottom pads and uprights have full length rubber strips.• Hot dip galvanized finish.• Quick release mounting pins change the transport rack from mobile to stationary quickly.

Groves Double Sided Heavy Duty Shop Carts

Groves Econo A-Frame

• Heavy duty, 146 lbs. • Steel A-Frame Rack• Holds up to 12,000 lbs. per side.• Hot dip galvanized finish.• 60”L x 60”W x 58”H - 6” spread on top A.• Ships knocked down for lower freight

Heavy Duty

• Rugged 4000 lb. capacity. • Rubber is mounted on base and upright supports to help protect material. • Six ratchet straps are included to secure load. • 8” casters, two rigid and two swivel with brake rated at 1000 lbs. each.

Groves Single-SidedShop Cart

• Holds fabricated parts. • Easy clean-up with hose. • Removable top A-frame for economical shipping. • 7” ledge depth. • 10” diameter pneumatic tires. • 5” diameter swivel locking casters. • 2,000 lb. capacity.

Dimensions: 40” L x 24” W x 36” H

Groves Fab Table

• Two built-in end clamps hold the tables together. • Rubber is mounted on top and the sides where the carts clamp together. • Four heavy duty 5” diameter swivel casters rated at 1,000 lbs. each. • Four foot operated locks hold the table in place. • Galvanized finish for long lasting durability.Dimensions: 60” L x 25” W x 42” H

• Layout complete kitchens by attaching the tables together lengthwise or by attaching them on a 90 degree angle.

Groves Bundle Racks• Available in either 6,000 lb (3,000 lbs per post) or 9,000 lb (4,500 lbs per post) capacity.• Galvanized rails 11” wide x 5½” high x 60” long butt together for desired length• BR-5 has 2” square holes spaced 4” apart on the top• BR-2.5 has 2.5” square holes spaced 5” apart on the top• Outside rails are designed with slots to hold 2 x 4’s.

* SAFETY WARNING: Bottom rails must be bolted to the floor for safety.

grOvEs

Type Size Capacity Overall Height

Height With

CasterItem # Price

TR4482 44” x 82” 4,000lbs 58” 69” 2516-0026 $1,150.00TR4496 44” x 96” 4,000lbs 70” 81” 2516-0025 $1,450.00

Caster Kit - - - - 2516-0036 $100.00

2516-0005 $225.00

Size Weight Item # Price54” L x 38” W x 48” H 215 lb. 2515-0025 $550.0084” L x 40” W x 48” H 360 lb. 2515-0026 $735.0084” L x 42” W x 72” H 460 lb. 2515-0027 $895.00

2516-0118 $295.00

2515-0019 $545.00 /ea.

Description Item # PriceBR-5 Outside Rail

6,000 lbs (wood slot) 99-343.5-0003 $125.0040" Post 2516-0112 $15.0060" Post 2516-0008 $20.0080” Post 2516-0023 $27.00

Rubber Caps 2516-0045 $1.50BR-2.5 HD Outside Rail

9,000 lbs (wood slot) 2516-0042 $145.0072” HD Post 2516-0053 $45.00


Lifting & H

andling

124

124

lIfTINg & HaNDlINg

PremiumFabrication Table

Modular Fabrication Table

Transport Frames

Lite Stone ‘A’ Frame Fabrication Stand• Includes two A frame sections, cross member, and all necessary hardware.• Middle support bar connects each A-Frame end piece• Capacity: 12,000 lbs. per side• Dimensions: 64” H x 6’ W x 6’ L• Store slabs on both sides• Constructed of 4” channel and 2” angle iron

• Heavy duty steel height adjusting bolts• Rubber lined top rail prevents damage to stone surface• Folds flat for easy storage• Adjustable height 36” - 44”

Ideal for transporting and storing material within the factory or transporting material to building sites. Frame can be loaded onto truck by forklift or crane.

• Sturdy structure, designed so as to eliminate any risk of slab tipping over• Slabs are placed on special rubber profiles and secured with 4 or 8 adjustable tighteners.• Width of slab storage base area on each side: 1’1” • Maximum load capacity: 2,204 lbs • Built-in brackets on all underneath sides for forklift transport.

• Rubber lined work sturdy work table• Adjustable feet• Constructed of 18 gauge 2’x2’ square tubing• Main module 84’ x 28 1/2’• Includes 2 extension tables 36’ x 28 1/2’• Weight: 165 lbs• Loading capacity: 660 lbs• Collapsible for ease of transport

• Maximum capacity: 1,000 lbs.• Dimensions: 79” x 24” x 42”• Width with top in vertical position: 30.5”• Two removable center braces for convenience when working with sink hole cut-outs• Four adjustable leveling posts for added stability• Tires with locking brakes provide added stability• Table top lined with replaceable tongue-in-groove rubber padding strips to minimize damage to work piece• Ships flat to save you money (some assembly required)

GCTGCT

GCT

GCTGCT

2515-0035 $99.002516-0149 $249.00

2516-0148 $1,032.502516-0147 $1,118.33

2515-0034 $749.00

2515-0033 $495.00


125

Lifti

ng &

Han

dlin

g

125

lIfTINg & HaNDlINg

Site Trolley

Self-Locking Trolley

6ft. long Slab DollyThis dolly can transport a complete 7’ x 10’ stone slab. The heavy gauge steel tube is carpeted and is 6’ long x 1-1/2” wide. Four adjustment pins help hold the slab in place for transport. The two center wheels are 10” high and the four outer wheels are 8” high and made of heavy duty solid rubber. This design makes it easy to turn the slab in any direction.

GrovesSlab Dollies

Maneuvers easily indoors and out. 3” wide neoprenerubber. Pneumatic tires reduce breakage causedby vibration, 12” width measured from outside of wheels adds stability, 1,000 lb. capacity using 10” tires and 4” casters, 500 lb. capacity using 8”tires and 3” casters.

• 2 pneumatic rubber: 10 1/4 “x 2 1/4”• Bottom, sides and upper edges of the channel rubber padding. • Load capacity: 660 lbs• Weight: 17 lbs• Support plate: 1’ - 3 7/10” x 3 9/10”• Wheelbase: 3 9/10”

Midsota 8 foot TelescopingSlab Lifting Boom

Lift granite slabs using your fork lift. Built heavy duty for your toughest jobs. Extends out to 6, 7, or 8 feet for easy access to all your slabs. 6,000 lb. Capacity. Designed for 4” forks, with long fork pockets.

Forklift Boom

Now able to hold 6cm!

• Grips material automatically and securely. • Clamping supports and base are rubber padded. • 2 rubber wheels: 16” x 3 ¼”• Loading capacity: 880 lbs• Weight: 65 lbs• Length of support plate: 20” • Wheelbase:21” • Clamp width: 0-6 “

Slab Trolley• 2 solid rubber wheels: 7 9/10” x 2”• Bottom, sides & top edges of channel are rubber padded.• Loading capacity: 660 lbs• Weight: 19 lbs• Support plate: 1’ - 3 7/10” x 3 9/10”• Wheelbase: 3 9/10”

This boom is a two section rectangular tube steel boom for use on 3 ton forklift trucks and larger. It offers versatility with maximum visibility for the driver.

• Weight - 286 lbs.• Maximum load capacity, fully retracted - 5,291 lbs., fully extended - 1,322 lbs.• Manually telescopes from 79” to 137” in 3 increments of 20”.• Boom extension is designed so it cannot be pulled all the way out.• The boom is firmly secure onto fork blades by two bolts located at the back of each fork pocket and restraint pins.• Slip onto forks design with fork pockets 6” W x 2” H.• Fork pockets are 15” to centers.

GCT

GCTGCT

GCT

2511-0023 $349.00

2517-0007 $478.00Length /wheel size Item # Price

36”L/10”wheels 2517-0003 $151.0048”L/10”wheels 2517-0002 $177.0072”L/10”wheels 2517-0006 $209.0048”L/8”wheels 2517-0011 $167.0072”L/8”wheels 2517-0009 $198.00

Ideal for moving kitchen tops and other heavy work pieces onto work site. Large pneumatic wheels make moving heavy loads over rough terrain easy.

2519-0018 $749.00Madein U.S.A.Made

in U.S.A.

2517-0022 $109.00

2511-0022 $99.00

2519-0027 $795.00


Lifting & H

andling

126

126

lIfTINg & HaNDlINg

Spartan Curb Lifting Squeeze ClampThis high quality slab lifter is designed to lift standard sized stone slabs for counter tops and curbs. The slab lifter has a lifting capacity of 1,500 lbs. The center chain is released when lifting and the clamp holds the stone by applying pressure to both sides. The sides of the stone are protected from scratches from the rubber holding pads. The center chain is attached to the center hook to release. Weight: 61 lbs. Shipping weight: 75 lbs. Maximum opening: 6”.

Caldwell Group Pressure Stone Slab Tongs

Special in its requirement of grip ratios and pad material to properly suit the material to be lifted. Ingots, bales and other straight sided materials require a sufficient coefficient of friction between the material and grip pads. Grip pad material may be rubber, steel, belting, points, etc. Consult factory with application details for proper design evaluation.

Setting TrucksBuilt tough to handle the large dies. Stands 57-1/2” high and has 21-5/8” wide frame with 5-1/4” x 24” rubber covered toe plate. Non-marking rubber strips are installed on the exposed frame rails for load protection. Equipped with four 12-1/2” x 3.50 pneumatic wheels. Weighs 95 lbs and has 2,000 lb load capacity. Features dual wheels for maximum maneuverability with heavy loads. New and improved center brake for quick stopping, is available.

Groves Dumpster

• Convenient lever action, assures safe dumping. • 4,000 lb. capacity. • Continuous length fork lift tubes add stability when unloading. • Heavy duty construction. Unit is made with 1/4” steel plate. • Dumpster has 1 cubic yard of capacity.

Safety Feature!External Release Lever

Forklift Tubes

GCT

Groves Fab Stand - Galvanized

• Adjustable to any height from 34” to 42” • Stackable for transporting or storage • Rubber mounted on top prevents sliding and scratching • Set up your entire job to ensure correct fit to templates and continuity of polish • Weighs 20 lbs.

2507-0017

$580.00

Item # Cap. Load Wid. Price

2507-0023 1,000 6”-10” $595.002507-0045 1,500 8”-12” $643.002507-0048 1,500 10”-14” $776.002507-0040 1,500 14”-18” $960.002507-0027 1,500 18”-22” $1,130.00

With Brake

2505-0156 $549.00No Brake

2505-0157 $449.00

2528-0001 $1,595.00

2515-0021 $79.00


127

Lifti

ng &

Han

dlin

g

127

lIfTINg & HaNDlINg

G-Force Vertical

SlabLifter

G-Force Vertical Slab Lifters

Picks up stone slabs up to 3-3/4” thick. Narrow body to help with placement. Has replaceable rubber pads and locking device to secure slabs. 1,500 lb. capacity.

Has slab locking device and replaceable rubber pads.

HVL1000: 1,000 LB. Capacity and

1-3/4” Max Opening HVL2000:

2,000 LB. Capacity and 3” Max Opening

EZ-Set SCISSOR FRAMES

EZ-Set LIFTING PLATES

Multi-UsePlacing Tool

Quick release system makes switching plates a snap.

Welded handles for complete placement control.

Stay-openlocking system.

360° swivel coupler.

Sure-grip pads hold materials more securely.

Multiple plates to chose from.

Monumentall Lifting Device• 6 Position adjustments for 3” to 15” grip. • 2,500 lb capacity. • Single line device - Works with any hoist lifting machine. • Polyurethane gripping pads, neoprene pads on metal edges; Protects from dings, won’t mark finished surfaces. • Semi automatic operation w/manual over center release handle. • OSHA accepted, confirms to ANSI B30,5B - 1991. • All weather device

Aardwolf Lifters

The patented Aardwolf Lifter is an accessory for lifting and moving slab-form loads.The Aardwolf Lifters incorporate a spring-loaded latch that automatically releases the lifter from the slab once the slab has been fully lowered to the ground. This makes the process of lifting andlowering of slabs a one-man operation

AL50 AL75

AL60

Safety: Requires only a small movement of the slab to engage and grip the slab, which is generally well below the over balance angle thus eliminating the danger to the operator.Size: Being of a compact construction, the Lifter allows for close packed slabs to be lifted out of racks and containers. Lower height slabs placed along side of taller slabs offer no problem, as is the case with scissor clamps.Versatile: Ideal for construction work. Because the clamping mechanism is to the front of the slab, they allow panels to be placed close against walls.Secure: The Aardwolf clamps grip slabs firmly. These Lifters have a force multiplying factor of approximately 2.5 to 1.

2514-0002 $499.00

Model Item # PriceHVL1000 2514-0003 $449.00HVL2000 2514-0004 $629.00

3000 lb. Cap. 2507-0057 $799.001,000 lb. Cap. 2507-0058 $549.00

Boulder 24” 2507-0044 $689.00Adjustable

Straight 2507-0051 $529.00Slant-Style 2507-0052 $499.00

Straight 12”-24” 2507-0047 $379.00Straight 24”-30” 2507-0046 $379.00

2507-0016 $1,219.00

Model Size Item # PriceAL50 10-50mm 2507-0069 $529.00AL60 15-60mm 2507-0070 $589.00AL75 30-75mm 2507-0071 $589.00


Lifting & H

andling

128

128

lIfTINg & HaNDlINg

CALL TODAY FOR CUSTOMIZED SHOP QUOTES!


129

Nec

essi

ties

129

NEcEssITIEs

Yellow Rain Suit

YellowRubber Apron

GCT - Deluxe Heavy Duty Apron

Apron

This heavy duty rubberized fabric is 2-ply neoprene-36”Wx48”L, and offers excellent protection to anyone working in water spray. This full length apron is made of durable material.

New patent pending, heavy-duty apron made especially for stone fabricators. Two velcro strips are on the front to hold replacement polishing pads. The apron also has 2 pockets in the front with dual closing design which can hold cell phones and other valuables.

The Alpha® Apron is uniquely designed to prevent the polishing worker from getting wet. Made of strong vinyl material. This apron is lightweight, comfortable, and easy to use. A flexible waistband keeps it in place so there are not any strings or knots to deal with. The Alpha® Apron can also be used to keep the dust associated with dry polishing from your clothing.

Three piece heavy duty rain suit with vented back, jacket, bib, and hood. Available in two sizes: large and extra-large.

Flexible Waistband

FAB COAT™Fabricator Jacket

It has water proof wrist seals like the Stone Sleeves, a Cordura chest protector and pencil holder like our Bullet Proof Proof Apron, and a hood to keep you dry in those sink holes.

BULLET PROOF™Fabricator Apron

BULLET PROOF™ fabricator aprons are lighter, more durable, and safer than any other apron on the market. With the neoprene neck strap and lightweight/ultra tough Cordura you won’t even know you have it on. It is extra long and wide to keep your legs dryer and it buckles behind you to keep you safe.

Desc. Item # PriceOne Size

Fits All 4501-0018 $14.78

4501-0045 $19.95

4501-0003 $19.50

Size Item # PriceXXL 4501-0072 $19.00XL 4501-0039 $19.00L 4501-0040 $19.00

4501-0077 $149.95

4501-0074 $52.95


Necessities

130

130

NEcEssITIEs

Abaco Waterproof Sleeve ProtectorsProtects arms from getting wet during polishing. Lightweight, durable and flexible. 20” long. Velcro on top and a rubber bottom for watertight seal. Sold in pairs.

Buffalo Steel Toe Boots Yellow Rain Boots

Generous sizing allows for easy donning over work shoes. Adjustable straps.

Buffalo Steel Toe Boots are made of high molecular weight PVC for high abrasive wear. They are net lined for easy on and off, have V-bar molded shanks and safety toes that meet or exceed ANSI.

Grinder Gear Water Protectors for angle grinders

Grinder Gear is designed to protect the operator’s hand and grinder from water, cold and dust. By using Grinder Gear daily, you will extend grinder life and enjoy increased productivity.

• 9” powder-free blue nitrile gloves that are fully textured• Industrial grade with 8 mil finger thickness• 7.2 mil palm thickness• Ambidextrous with beaded cuff• Box of 100

9” Nitrile Powder-Free Gloves

• Protects hands from the corrosive action of grout, chemicals, and other harsh substances• 100% heavy-duty latex is puncture and tear resistant

Heavy-Duty Grouting Gloves

STONE SLEEVE™ Fabricator SleevesThe STONE SLEEVE™ fabricator sleeves are the solution to wet polishing and working around natural stone with water fed tools. The fabricator stays not only dry but warm as he can wear a sweatshirt or jacket underneath. The wrist seal is soft, comfortable, and absolutely water proof, guaranteed. The sleeve itself is a water proof, poly coated Cordura. They are manufactured to the same specs as military dive suits and are essential for any shop using water and wanting dry, productive fabricators.4501-0062 $21.85/pr.

Size Item # Price9 4501-0054 $18.75

10 4501-0037 $18.7511 4501-0055 $18.7512 4501-0056 $18.7513 4501-0057 $18.7514 4501-0078 $18.7515 4501-0061 $18.75

Size Item # Price8 4501-0065 $20.009 4501-0066 $20.00

10 4501-0067 $20.0011 4501-0068 $20.0012 4501-0069 $20.0013 4501-0070 $20.0014 4501-0071 $24.50

1918-0009 $21.00

4501-0063 $12.50/100pr4501-0047 $4.00

4501-0076 $49.45/pr.


131

Nec

essi

ties

131

NEcEssITIEs

Wax Crayons

China Markers

These non-staining waterproof crayons will

mark on practically any surface, including glass.

Fine tips are the perfect markers used to draw lines on stone for sink cut-outs and radius templating. Holds up to water during the cut. Remove with steel wool. Metal tip, quick drying, water resistant, smooth marking. Medium tips are for general stone identification marking.

Excellent for most surfaces. Pull string to sharpen. Sold in boxes of 12.

Paint Markers

Best quality. Suitable for temporary layout markings on granite, marble, and stone. Marks on any stone surface. 5” x 1/2” x 3/16”.

Soapstone

Qua

ntity

Dis

coun

ts

box of 12!

3M Paint Buster™Hand Cleaner

Canvas Drop Cloths

Premium quality heavy duty 8 oz. canvas drop cloths. 9’ x 12’

• Ergonomic • Stainless steel construction

Granite City Tool Stainless Steel Tape Measures

Color Item # PriceFine White 5209-0001 $3.30Fine Red 5209-0002 $3.30

Med. White 5209-0003 $3.20Med. Red 5209-0004 $3.20

Color Item # PriceBlack 2906-0005 $4.95Red 2906-0006 $4.95

Yellow 2906-0007 $4.95

Color Item # PriceBlack 2906-0009 $7.95/dzRed 2906-0010 $7.95/dz

Yellow 2906-0011 $7.95/dz

2906-0004 $1.10/ea.or

$39.00/ case of 144!

9.75 oz 5209-0018 $14.68

Cream type hand cleaner offering superior performance in the removal of lacquer, enamel and urethane paints, primers, putties, plastic fillers, adhesives and automotive sealants from skin.

5209-0013 $21.50

Size Item # Price16’ x 1” Standard 5209-0022 $12.50

26’ x 1”Metric/Standard 5209-0006 $16.50 27’ x 1” Standard 5209-0024 $10.40

Best Quality

Single Sided Razor Blades

0305-0011 $3.95/Box 100


Necessities

132

132

NEcEssITIEs

• For polishing any tile surface to a bright shiny finish• Fine mesh 36” wide• Sold in bags of 5 yards

For countertop leveling. Also used in monumental

setting of the base to the die.

Will not stain.

Used for stirring two part epoxy.

Plastic 4” wide.Sold in Boxes of 100

Wobble Wedges are used for leveling granite countertops. Ridged sides lock into place and prevent slipping.

Wobble Wedges

Tongue DepressorsCheeseCloth

Plastic Setting Cushions

Glue Spreaders

3M Painters Tape 60 yd

Counter Top Protection

• Great for most hard surfaces such as corian, surell (Formica), granite, silestone, avonite, ceramic tile, etc.• Protects tile grout from staining• Scratch-resistant

0712-0014 $79.00

5209-0007 $4.25

Size Item # PriceBOX 75 5207-0002 $11.90

BOX 300 5207-0001 $39.50

Size Box of Item # Price1” x 1” x 1/16” 100 5108-0008 $15.50/box1” x 1” x 1/8” 100 5108-0009 $19.00/box1” x 1” x 1/4” 100 5108-0011 $23.00/box1” x 1” x 1/2” 50 5108-0010 $23.00/box

0305-0012 $8.50/Box 500

This tape removes cleanly without adhesive transfer or surface damage for up to 14 days, even in direct sunlight.

Composite Shims• Pre-scored for easy snapping• Greater load bearing than wood shims• Use on all shimming applications• Split resistant• Waterproof

5207-0003 $5.95/box32

Size Item # Price3/4” 5209-0023 $3.491” 5209-0031 $3.952” 5209-0032 $7.85

0305-0017 $28.95/Box 100

Pine Shims

Shims come in cartons of 120 and are 8”.

5207-0004 $9.95/box

GCTGCT

24” x 600” Coverage sq. ft. 1,200


Steel Wool is sold 12 pads per bag.

Steel Wool

Grit Item # Price000 grit 5209-0028 $3.95/bag

0000 grit 5209-0029 $3.95/bag

Mixing Board

0305-0033 $12.50

In-Line Blow Gun

2701-0067 $17.75

• Attach between your air supply and your current receiver.• You get a Blow Gun that is always available for use.• Will not short supply your tools connected to the blow gun.

• Peel Away Non-Absorbing white sheets • White Sheets allow for Accurate Color Mixing.• Less Mess at Job Site and Shop.• 100 Sheets per Board

Steel Wool

Grit Item # Price1 grit 5209-0037 $2.95/bag0 grit 5209-0036 $2.95/bag

00 grit 5209-0035 $2.95/bag

Steel Wool is sold 16 pads per bag.

133

Nec

essi

ties

133

NEcEssITIEs

Granite City Tool Gear Bag

Squeegee

The plated-steel frame provides ideal combination of strength and economy. The 2-ply soft-natural rubber blades yield performance superior to similar looking products. 14” wide.

White Rubber Mallet• Will not mar tile or baseboard• Rubber head securely mounted on wood handle

5209-0019 $34.95

High Quality Construction

For all your tool

holding needs!

5209-0008 H-14 Squeegee $8.50 5209-0009 Z-14 extra rubber blade $5.40/ea.

2305-0081 $8.50

Suction Rings

Includes two rings: a small ring for faucet opening holes up to 1-1/2” and a large ring for sink opening holes up to 3”.

BOTH 1101-0055 $16.90

GCT


Necessities

134

134

NEcEssITIEs

Ear Plugs • Longer length for easy fitting and removal. • Bright green color for easy compliance checks. • Tapered for easy insertion in any size ear canal. • Non-irritating, smooth surface for added comfort. • NRR 32 rating• Corded or non-corded

• Click mechanism for easier use and dispensing.• Chute delivers plugs into the palm of your hand.• Affordable enough to be near every work area.• Eliminates the mess of individual paper/polybag packaging.• Each dispenser is sealed and disposable, plus completely recyclable.• Available in 250 per PlugStation®

with SparkPlugs® foam earplugs.• Mounting bracket with hardware included with every PlugStation.

4503-0008 $32.25

PlugStation® Earplug Dispenser

Face Shield Klondike Safety

Glasses

For full-face protection rely on Wilson visors to guard against light impacts, sparks, molten metal, and liquid splashes. Meets or exceeds ANSIZ87.1-1989 specs. Brow guard is constructed of tough, thermoplastic materials with a specially designed ledge to prevent liquids from splashing down the inside of the visor. Face shields are molded of durable propionate and polycarbonate to resist impact; attaches easily to brow guard with positive locks and snap fasteners.

The Klondike® Series features safety and style at an affordable price to separate you from the pack. Klondike’s matte black frame finish, adjustable temples,11 degree base curve lens and proprietary gel nose piece keeps you at the peak of comfort and style all day long.

Color Item # PriceSmoke 4504-0010 $3.95Clear 4504-0009 $3.95

Item # Description Price4504-0007 Headgear/Frame only $11.704510-0010 Face shield lenses $5.75

Uncorded set 4503-0001 $.50/prCorded set 4503-0006 $.90/pr

3M Ear Muffs

Industrial use ear muffs with a noise reduction rating of 23 decibels. Adjustable and comfortable.

4503-0007 $14.00

Dust Mask

Case of 10

• HandyStrap® with buckle allows mask to hang down around neck when not in use. • Ventex® valve lets the hot air out faster.• Contoured nose bridge with soft foam nose flange allows all-day comfort. • Dura-Mesh® shell resists collapsing so mask lasts longer. • NIOSH certified to have a filter efficiency of 95% or greater against particulates free of oil. 4507-0045 $26.75

3M Filter Mask No. 8210 General dust and sanding mask. Meets new NIOSH standards for non-toxic dusts and mists in well ventilated areas. This disposable mask is for temporary use. Sold in boxes of 20.

4507-0002 $17.50/Box

3M Filter Mask No. 8211This respirator offers a comfortable foam face seal. Is uniquely designed to help provide protection against certain non-oil based particles. It is ideally suited for work settings that involve heat, humidity, or long periods of wear.

Case of 104507-0049 $27.95


135

Nec

essi

ties

135

DusT cONTrOlNEcEssITIEs


Water Lift: 72”CFM: 116Volts: 120Watts: 1324 peakAmps: 11.5RPM: 23,000

This vacuum comes complete with: 2 Wands, 1 Crevice Tool, 1 Square Floor Tool, 1 Micro Pre-filter Bag, 12’ X 1-1/2” Crush Resistant Hose. Much more than the normal run of the mill Wet/Dry Vac.

• Cyclonic Pre-Filtering• No Blow-By• Clean filters without taking lid off• No filter change for wet pick up• Regulated drain

“Dustless” Wet/Dry Vacuum - 16003

4714-0002 $299.95

2pk Micron Pre-Filter Bag 99-461-0001 $25.006ft Hose Extension 99-461-0002 $21.95

This 3 sided plastic dust barrierwas put up by one person in

less than five minutes.No tape, no ladders, no marred ceiling!

Spring loaded poles used to create tapless dust barriers in minutes!

Non-skid Plate: Holds the pole firmly in place at the ceiling without leaving any marks.Head: Head and non-skid plate separate allowing the plastic sheeting to be sandwiched securely in-between.Ball Joint: Swivels for use with vaulted ceilings and stairways.PlungerCollarSpring: Provides constant pressure between the floor and the ceiling. Also allows the pole to be lifted so the plastic sheeting can be tucked underneath, making a tight barrier top to bottom.

SLP 2 PackContains two 12ft extendable loaded poles, and two grip disks.

Kit 20 Contains two 20ft extendable loaded poles, two jacks, and two grip disks.

Carry BagHolds six SLP 2 Packs and three Kit 20’s with jacks unattached.

System

Porta-Trunk® Dust Collector

4715-0001 $124.95

4715-0002 $198.95

4715-0003 $59.95

• For light duty or infrequent plant operations.• Static (non-pulsed) filter system.• Operating controls conveniently located on fume hood• Ultra-Web® nanofiber filters provide high MERV* 13 filtration efficiency.• “Plug and go” operation.• Fits easily through standard doorway.

4706-

Please call for more information and pricing



6 Month Limited Warranty



Stone E

tching

136

136

sTONE ETcHINg

Excellent detail etching machine features 2-speed HI-LO rotary cord switch and stroke adjusting screw with lock-nut for precise control. Comes with: diamond, carbide, and 4 steel tips. 120V.

Pneumatic Suhner Engraving Pen with tungsten carbide stylus point. Offers vibration-free and quiet high speed etching on various types of materials. Low air consumption, 1 cfm. Lightweight, 1/3 lb., Variable-speed.

Now you can make beautiful etchings in your own shop. By using a diamond tip bit in a variable-speed engraving tool, you can simply draw direct on a polished surface. Call and find out how inexpensive it is to get started.

120 Volts

ElectroStylus Stone Etching Tool

Ideal Electric Engraver Suhner LGS 30 Etching and Engraving Pen

Engraver Stone Etching Tool

The Dremel Lithium Ion Cordless Tool uses the latest in battery technology and delivers increased power, higher speeds and improved battery performance. It includes 60 accessories, a heavy-duty carrying case and a battery charger.

Lithium-Ion CordlessRotary Tool

Speeds: Vari. (5,000-35,000 RPM) Motor: 10.8V DC- Collet. Capacity: 1/32” - 1/8” (1/8” included)Tool Weight: 14 oz.

Features: • 1/4” collet capacity • Double insulated • High speed (25,000 RPM) for maximum production • 120 Volts, 3.5 AMP hi-tech motor• Stepped neck of solid aluminum housing for added durability• AC/DC switch for use with alternative power source

GDO601 Die Grinder

The flexible, 36” shaft attaches easily and adds a new level of versatility to your project capabilities, with fingertip control for polishing, carving, sanding, engraving and more.

Flex-Shaft #225

Attachment to a corded rotary tool or the 10.8V Lithium-ion Cordless.

Engraver 1703-0046 $21.50Diamond Tip 1702-0016 $15.50

1703-0001 $58.50

1703-0011 $319.73


Features: • Low-cost, industrial-quality marker quickly and easily engraves metal, glass, stone, ceramics, plastics, hard rubber, wood and many other hard materials.• Operates at 7,200 strokes per minute.• Includes carbide-tipped point for normal markings.• Diamond point available for engraving extra-hard materials.• 120V, 60Hz

Engraver 1703-0034 $139.00Diamond Tip 1702-0018 $28.95

1703-0045 $94.99

1703-0054 $119.00

1703-0049 $30.00


Madein U.S.A.Made

in U.S.A.

1 2 3 4

5 6 7 8

9 10 11 12

13 14 15 16

17 18 19 20

21 22 23

2425 26

12

3

4

5

6

7

89

137

Sto

ne E

tchi

ng

137

sTONE ETcHINg

Blue Diamond Electroplated 1/4” & 6mm Shaft Die Grinder Tools

Blue Diamond Electroplated1/8” Shaft Die Grinder Tools

30/40 Diamonds 50/60 Diamonds (Standard) 1/4” Shaft 6 mm Shaft 1/4” Shaft 6 mm Shaft

Description # Item # Price Item # Price Item # Price Item # Price5/32” Dia Blunt x3/8” lg 1 - - - - 1912-0064 $18.00 1912-0090 $18.001/4” Dia Blunt x 1/2” lg 2 1912-0125 $22.00 1912-0149 $22.00 1912-0065 $21.00 1912-0091 $20.001/4” Dia Blunt x 3/4” lg 3 1912-0126 $23.50 1912-0150 $23.00 1912-0066 $22.00 1912-0092 $22.00

1/4” Dia Blunt x 1 1/2” lg 4 1912-0127 $28.50 1912-0151 $28.00 1912-0067 $25.00 1912-0093 $25.003/8” Dia Blunt x 3/8” lg 5 1912-0128 $23.50 1912-0152 $20.00 1912-0068 $18.00 1912-0094 $17.003/8” Dia Blunt x 3/4” lg 6 1912-0129 $22.00 1912-0153 $22.00 1912-0069 $19.00 1912-0095 $18.501/2” Dia Blunt x 3/4” lg 7 1912-0130 $28.50 1912-0154 $28.00 1912-0070 $23.00 1912-0096 $23.00

1/2” Dia Blunt x1 1/2” lg 8 1912-0131 $39.00 1912-0155 $38.00 1912-0071 $28.00 1912-0097 $27.005/8” Dia Blunt x 3/4” lg 9 1912-0132 $35.00 1912-0156 $35.00 1912-0072 $27.00 1912-0098 $27.00

1/4” Sphere End x 3/8” lg 10 1912-0133 $22.00 1912-0157 $22.00 1912-0073 $20.00 1912-0099 $20.003/8 “ Sphere End x 3/4” lg 11 1912-0134 $30.00 1912-0158 $30.00 1912-0074 $27.00 1912-0100 $27.501/2 “ Sphere End x 3/4” lg 12 1912-0135 $37.00 1912-0159 $37.00 1912-0075 $25.00 1912-0101 $25.00

1/2” Bullet x 3/4” lg 13 1912-0136 $38.50 1912-0160 $38.00 1912-0076 $37.00 1912-0102 $37.00Pointed 14 - - - - 1912-0077 $14.00 1912-0103 $12.50

Dove Tail 5/8” dia 15 1912-0137 $33.50 1912-0161 $35.50 1912-0078 $30.00 1912-0104 $30.00Cone 1/2” dia x 3/4” lg 16 1912-0138 $32.00 1912-0162 $32.00 1912-0079 $29.50 1912-0105 $30.00

Cone 3/4” dia x 1 1/8” lg 17 1912-0139 $36.50 1912-0163 $36.50 1912-0080 $27.00 1912-0106 $27.001/2” dia Ball 18 1912-0140 $25.00 1912-0164 $25.00 1912-0081 $22.50 1912-0107 $22.003/4” dia Ball 19 1912-0141 $35.00 1912-0165 $35.00 1912-0082 $28.00 1912-0108 $28.001” dia Ball 20 1912-0142 $42.00 1912-0166 $42.00 1912-0083 $44.00 1912-0109 $35.00

1” dia x 1/8” Disc 21 1912-0143 $35.00 1912-0167 $35.00 1912-0084 $30.00 1912-0110 $30.001” dia x 1/4” Disc 22 1912-0144 $37.00 1912-0168 $37.00 1912-0085 $30.00 1912-0111 $25.001” dia x 3/4” Disc 23 1912-0145 $50.00 1912-0169 $50.00 1912-0086 $43.00 1912-0112 $40.00

11/2” dia x 1/4” Disc 24 1912-0146 $57.00 1912-0170 $57.00 1912-0087 $55.00 1912-0113 $47.002” dia x 1/4” Disc 25 1912-0147 $100.00 1912-0171 $100.00 1912-0088 $86.00 1912-0114 $80.00

1” dia x 1/4” rad. Edge Disc 26 1912-0148 $35.00 1912-0172 $35.00 1912-0089 $27.00 1912-0115 $27.00

50/60 DiamondsDescription # Item# Price

5/32” Dia Blunt x1/8” lg 1 1912-0116 $18.001/4” Blunt x 3/8” lg. 2 1912-0117 $23.00

1/4” Sphere end x 3/8” lg 3 1912-0118 $23.003/8” Sphere end x 3/8” lg 4 1912-0119 $26.25

Pointed 5 1912-0120 $16.00Dove Tail 3/8” dia 6 1912-0121 $24.00

Cone 3/8” dia x 9/16” lg 7 1912-0122 $24.003/8” dia Ball 8 1912-0123 $18.00

3/4” dia x 1/8” Disc 9 1912-0124 $35.00


Green Silicon CarbideGrinding Wheels

Specially designed for sharpening all types of carbide tools. These long-lasting and fast-cutting wheels are available in several different thicknesses and face shapes to meet any special need. Specify diameter and arbor.

Size Face Item # Price7” x 1” GC-80 1906-0040 $34.008” x 1” GC-80 1906-0038 $43.50

6” x ¼” x 1” GC-80 1906-0034 $39.756” x ¾” x 1” GC-80 1906-0064 $25.006” x 1” x 1” GC-80 1906-0063 $27.00

10”x 1” x 1¼” GC-80 1906-0102 $59.00

Stone E

tching

138

138

sTONE ETcHINg

ElectroplatedDiamond Profile Set

ElectroplatedDiamond Profile Set

Diamond Profile Bits

Excellent for marble or composite shaping. Designed for use on softer stones. 1/4” shanks.

Electroplated diamond profile set for marble and composites.

• Best tools for sculpting. • Longer lifetime and faster work than EP tools. • Ask us about our electric and air die grinders.• 6mm shanks

GCT GCT

5-3/4” Wheels and Mandrel

Diamond BrazedMounted PointsGCT

Set of 14 points.

6 piece medium 1912-0003 $19.505 piece coarse 1912-0004 $19.50

Type Description Item# PriceGear 36mm(D)/9mm(H)/3mm(T)/4mm(W) 1912-0031 $88.95Coin 30mm(D)/3mm(H) 1912-0030 $76.95Ring 25mm(D)/5mm(H)/3mm(T) 1912-0206 $76.95Cone 12mm(D)/20mm(H) 1912-0028 $76.95

Cylinder 10mm(D)/25mm(H) 1912-0029 $75.50Funnel 16mm(D)/12mm(H) 1912-0205 $76.95

30 Piece with 1/8” shank 1912-0002 $14.6520 Piece with 1/8” shank 1912-0001 $10.00

Diamond Profile Blades6mm shank

Size Item # Price3/4” 1912-0046 $33.25

1-1/4” 1912-0047 $37.001-1/2” 1912-0048 $46.00

2” 1912-0049 $60.002-1/4” 1912-0050 $72.00

Diamond Wheel Cutting1/8” shank

1915-0002 $10.50

1912-0201 $74.25


Resin bond diamond polishing cones are ideal for honing or polishing intricate shapes or hard to reach areas. 1-3/4” long x 1” wide, tapering to 3/8” with 1/4” shank.

Solid felt mounted on 1/4” shanks. The perfect buffer for small areas and detail polishing.

Silicon carbide mounted profile shapes. Ideally suited for rough grinding or reaming on all types of stone. 1/4” shank.

Mounted Felt Bobs

Mounted Wheels

Max 24,000 RPM1 2 3 4

Polishing 1/4” Cones

1

2

GCTGCT

GCT

Max 10,000 RPM Must use wet

# Type Item # Price1 CYLINDER 4107-0003 $9.502 TAPERED 4107-0002 $9.50

# Type Item # Price1 3/4” x 2 1/2” 1907-0001 $9.952 7/8” x 2” 1907-0003 $9.953 1” x 2” 1907-0011 $9.954 7/8” x 2 1/2” 1907-0005 $9.95

Grit Item # Price#30 4109-0021 $46.80#50 4109-0118 $35.00#100 4109-0119 $31.00#200 4109-0120 $31.00#400 4109-0121 $31.00#800 4109-0122 $31.00

#1500 4109-0023 $31.00#3000 4109-0124 $31.00Black 4109-0024 $35.00White 4109-0025 $35.00

GCT

Riffler File SetGCT

GCT

139

Sto

ne E

tchi

ng

139

sTONE ETcHINg

Grit 1” Price 2” Price 3” Price 4” Price#30 1904-0383 $9.00 1904-0387 $12.38 1904-0395 $18.85 - -#60 1904-0409 $9.00 1904-0386 $12.38 1904-0392 $18.85 1904-0402 $31.00#80 1904-0377 $9.00 1904-0385 $12.38 1904-0393 $18.85 1904-0403 $31.00#150 1904-0376 $9.00 1904-0406 $12.38 1904-0394 $18.85 1904-0404 $31.00#200 1904-0370 $7.50 1904-0378 $11.31 1904-0407 $17.77 1904-0396 $27.75#400 1904-0371 $7.50 1904-0380 $11.31 1904-0408 $17.77 1904-0397 $27.75#600 1904-0372 $7.50 1904-0379 $11.31 1904-0389 $17.77 1904-0398 $27.75#800 1904-0374 $7.50 1904-0381 $11.31 1904-0390 $17.77 1904-0399 $27.75

#1800 1904-0373 $7.50 1904-0382 $11.31 1904-0391 $17.77 1904-0400 $27.75Backer 4113-0001 $15.95 4113-0002 $17.95 4113-0003 $19.95 - -

Excellent for grinding and polishing granite, marble, glass, or composite materials. Triatic discs are designed for optimal performance and every grit is nickel plated diamond and does not require water.

Triatic Diamond Discs - For Detail Polishing

1/4” shank backer

Shape Item # PriceTriangle 2302-0010 $28.00

1/2” Round 2302-0011 $28.00Round 2302-0012 $28.00Square 2302-0013 $28.00

15” long overall with 7-3/4” long diamond coated. 80 grit coarse. Easy to hold red handles.

Large Diamond Files Diamond StoneEtching Pens

Diamond riffler file set, 10 pack

Polishing Pads, Q.R.S. Connections

Pen 1706-0002 $18.50Refill 1706-0001 $8.50

Pencil Stylus 1706-0003 $14.95

2302-0014 $13.50


Stone E

tching

140

140

sTONE ETcHINg

Diamond Points for Etchingand Engraving Tools

These versatile diamond points fit nearly every engraver on the market.* Quantity discounts available

The JET STIK, with its 5,000 feet per second high velocity flame, is unsurpassed in giving you the control, speed and versatility you need when surfacing, carving, edging, sculpting, and texturing stone. It removes material rapidly without overheating, fracturing or fusing the stone. The JET STIK has dozens of uses such as: Edging granite countertops and building panels, restoring the non-slip surface on old steps, stone sculpting and even graffiti removal. Works great on: granite, sandstone, bluestone, dolomite limestone, or quartzite.

Included Equipment: • JET STIK • Propane regulator • Hose bundle • Hard-hat with visor

JET STIK Stone WorkingFlame Tool

HD-510 Flame Finish Tool

This premium heavy duty outfit features a rigid, high impact plastic tool box with steel latches to safely transport equipment. Kit features Smiths revolutionary Dual Guard System which combines a flash arrestor built into the torch head.

Rose bud attachment is designed for fast flame finishing of granite. 15 PSI acetylene and 15 PSI oxygen are the optimum settings for regulators to efficiently flame finish.

• Safety glasses • 10 respirators • Striker • Instruction manual

Diamond Point Description Item # Price4 FACET .060 x 5/8 x 100 1702-0001 $17.25

DREMEL 75 DEGREE 1/8x1 (WHITE) 1702-0002 $15.25DREMEL 90 DEGREE 1/8x1 (YELLOW) 1702-0003 $15.25

ELECTRO STYLUS .060 X 5/8X90 PHONOPOINTS 1702-0004 $15.25DREMEL 105 DEGREE 1/8x1 (BLUE) 1702-0005 $11.00BURGESS 100 DEGREE-(BROWN) 1702-0006 $12.00

BALL POINT, #3 F/Foredom Engraver 1.0mm 1702-0011 $6.70BALL POINT, #4 F/Foredom Engraver 1.4mm MEDIUM 1702-0012 $7.10BALL POINT, #5 F/Foredom Engraver 1.8mm LARGE 1702-0013 $7.10

BALL POINT, #6 F/Foredom Engraver 1702-0014 $11.259929 FOR DREMEL 1702-0016 $15.50

3901-0001 $2,179.00

3901-0002 $499.00

Smith Equipment will repair or replace any Lifetime torch handle, cutting attachment or cutting torch that needs repair resulting form normal wear and tear or from defects in material or workmanship for as long as you own the torch. Note: Torches used with non-Smith original components, such as tips or repair parts, will not be eligible for lifetime warranty coverage.


Foam Head 9”Q.R.S. Connection

50lb Weight

Lavina™ Floor Polishing Machines

These machines effortlessly float over wet or dry concrete on planetary floating heads and are driven by a single serpentine belt. Lavina has a self-leveling AIR-FLOW-THROUGH vacuum shield with LAVINA’s revolutionary dust agitation system.

NATO™ 3” Super Thick Polishing Discs

Each grit step increases concrete’s glossiness and reflectivity. For matte finish stop polishing after grit 400.

V-Harr™ System for Polishing and Restoring Concrete Floors

This system is developed exclusively for polishing and restoring concrete floors. However, it is also ideal for terrazzo and soft marble floors and can be used on any planetary movement floor polisher.

Many Other Sizes Available

Lavina 16E™ Lavina 20™ Lavina 25™ Lavina 25N™ Lavina 32SPS™Voltage 240V; 1 Ph 240V; 1 Ph 240V; 3Ph or 1Ph 240V; 3 Ph 240V; 3PhFrequency 60 Hz 60 Hz 60 Hz 60 Hz 60 HzHorse Power 3 HP 4 HP 7.5 HP 15 HP 20 HPAttachment speed 300-1,100 RPM 300-1,440 RPM 300-1,440 RPM 300-1,440 RPM 300-1,100 RPMWorking width 16 in. 20 in. 25 in. 25 in. 32 in.Tool diameter 7 in. 9 in. 9 in. 9 in. 9 in.Tool holder diam. 4.5 in. 4.5 in. 4.5 in. 4.5 in. 4.5 in.Cable length 57.1ft /17.4m 58 ft. /17.4 m 58 ft. /17.4 m 57.1ft/17.4m 58 ft/17.4mWeight of Machine 187 lbs. 265 lbs. 220 lbs. 550 lbs. 800 lbs.Grinding pressure 88 lbs. 155 lbs. 48 lbs. 330 lbs. 551 lbs.Machine L.W.H. 31.1”x16.9”x41.7” 54”x21.6”x44” 54”x27.6”x44” 54”x27.6”x44” 84.6”x 35.4”x49.2”

Item# 1802-0017 1802-0013 1802-0015 1802-0016 1802-0018

Price $4,500.00 $6,100.00 $11,500.00 $12,500.00 $20,099.00


1804-0064 $90.00

1804-0069 $160.00

#30 1806-0706 $18.70#50 1806-0707 $18.70

#100 1806-0324 $18.70#200 1806-0704 $18.70#400 1806-0708 $18.70#600 1806-0709 $18.70#800 1806-0710 $18.70

#1500 1806-0705 $18.70#3500 1806-0711 $18.70SET 6001-0304 $168.30

Grit Item # Price#30 1806-0330 $70.75#46 1806-0331 $63.50#70 1806-0332 $61.50

#120 1806-0281 $61.50

3” Super Thick Floor DiscsMETAL BOND

These superthick floor polishing discs are used for lighter machines which develop a relative pressure of 2 to 6 lbs. per square inch.

Can be used wet or dry

Grit 9” Price#120 1806-0712 $54.95#220 1806-0713 $54.95#400 1806-0714 $54.95#600 1806-0715 $54.95#800 1806-0716 $54.95

#1800 1806-0717 $54.95#3500 1806-0718 $54.95#8500 1806-0725 $54.95Set:

120-1800 6001-0357 $329.70

They are for wet applications only!

#30 4106-0602 $14.95#50 4106-0453 $14.95

#120 4106-0454 $14.95#220 4106-0455 $14.95#400 4106-0456 $14.95#800 4106-0457 $14.95

#1800 4106-0458 $14.95#3500 4106-0459 $14.95#8500 4106-0460 $14.95SET 6001-0133 $104.65

Spiral 3” Polishing Discs

Spiral pattern pads are the

undoubted solution for

restoring natural stone

floors.

They are for wet applications only!

141

Floo

r Pol

ishi

ng

141

flOOr POlIsHINg



Air C

ompressors

142

142

aIr cOmPrEssOrs

Rotary Screw Air Compressors

Air Compressors

These self-contained air compressors are designed and built for long service life on continuous duty in manufacturing and service applications. Output selection of two stage compressors from 5.3 to 120 cfm. actual free air delivery. Available sizes- 1-1/2 to 30 hp.- tank, and base plate mounts. Replacement compressor pumps also available. *Contact us for a complete listing.

CALL FOR COMPETITIVE PRICING

1-800-328-7094

Palatek Compressor Features:• Air Cooled After Cooler• Timed Dual Controls• Full Voltage Starter• Heavy-Duty Air Filter• Inlet Modulation Control• Deluxe Gauge Panel• Protective Shutdown Features• 5 Year Warranty

• Knowledgeable Sales Staff• Full Service Department

*Call for details.THE ULTIMATE PERFORMANCE ROTARY SCREW AIR COMPRESSOR

5 YEAR WARRANTY* - BEST IN THE INDUSTRY!

0902-

647-

• Warranty Service Center• Air Drying Systems

Refrigerated Air Dryer

Refrigerated dryers are precision engineered for efficient, reliable, long lasting service. Air is cooled by mechanical refrigeration to condense entrained water vapor; a high efficiency moisture separator automatically removes condensation. Models are available from 10 SCFM to 5,000 SCFM.

0903-

Prices Starting at $465.00


Turbo Cool Aftercooler

PricesStarting at

$358.00


Hot moist air from the compressor is cooled rapidly to a safe, usable temperature by the Van Air triple-cool process. Turbo-Cool aftercoolers utilize atmospheric air as the cooling medium. Install indoors or out. Standard models are rated to 3800 SCFM.

Model Capacity AFCM

Max Full

Load PSIG

Min. Full

Load PSIG

Motor H.P.

Motor Speed

5 hp 20 125 60 5 1,725 RPM

7.5 hp 28 125 60 7.5 3,450 RPM

10 hp 40 125 60 10 3,450 RPM

15 D 55 120 60 15 1,750 RPM

20 D 80 120 60 20 1,750 RPM

25 D 95 120 60 25 1,775 RPM

25 D4 110 120 60 25 3,545 RPM

30 D7 115 120 60 30 3,545 RPM

40 D 166 120 60 40 3,545 RPM

75 UDG 356 115 70 75 1,775 RPM

100 UDG 440 115 70 100 1,775 RPM

125 H 555 115 70 125 1,785 RPM

150 H 720 115 70 150 1,785 RPM

200 H 900 115 70 200 1,785 RPM

0908-


143

Air

Com

pres

sors

143

aIr cOmPrEssOrs

Tanner Air-Line De-Icer Van Air Compressed Air filters

Air Gauges

Dri Air Automatic Separator

Filter/Regulator/Lubricator

EAD-25-1/4 Electronic Automatic Drain Valve

Blast Control ValveInlet Bushings

0904-

Rid your compressed air system of problem causing oil aerosols, dirt, and pipe scale with Van Air Filters. Rugged housings and long lasting elements provide dependable filtration. With a variety of models for flows from 15 to 20,000 scfm (at 100 psi) and 10 element grades to remove oil, oil vapors, or particulates. Van Air offers the solution to your particular filtration needs.

These gauges monitor any type of compressed air equipment. Available in 1-1/2” thru 4” diameter. Pressure readings from 0 to 200 psi., 1/8” or 1/4” bottom or back mount.

Drainage cycles can be set from 1 to 45 minutes and discharge times can be adjusted from 1 to 15 seconds. 129 Volt AC with LED indicators and manual override. 6 ft. power cord.

Filter removes contaminants and moisture. Manual drain allows easy draining with slight push on drain. Regulator is adjustable from 0 to 125 lbs. with quick response and accurate pressure regulation. Self relieving allows pressure adjustment without air flow. Lubricator has needle adjustment to meter flow of oil. Can be filled under pressure. Clear shatter-proof bowl in all but 3/4” size, which has metal bowl with sight glass. Available in 1/4”, 3/8”, 1/2”, 3/4”, 1” IPT sizes.

Stop air-line and equipment freeze-ups with the Tanner De-Icer system. These units add an effective anti-freeze vapor to every cubic inch of air that’s used. No matter what the conditions, air-lines stay open. Formulated to operate in temperatures down to -70°F. Compact units are automatic, economical, and simple. Available for air-lines up to 2”.

Separates condensed water and oil from compressed air. Collects rust, scale and sediment from air lines. Ejects liquids and matter automatically from air lines. Delivers clean, dry air to pneumatic tools and equipment.

Call for pricing.

Call for pricing. Parts sold separately.

This in-line valve offers instant stop and start control of the abrasive. Installs in the sandblast hose, between the nozzle and the blast generator, eliminating the need for adjusting or resetting blast controls. Size: 1/2”

No. 1- Saves threads on expensive air tools. 1/4” male thread and 1/4” female thread. Use with Dallett pneumatic tools.No. 2- 3/8” male thread and 1/4” female thread. Use with hand facer or utility drill.

0904-

0906-0112 $89.95

4702-0002 $165.77

Pipe Size Capacity Item # Price3/4” 50 CFM 0904-0001 $259.001” 100 CFM 0904-0002 $278.502” 300 CFM 0904-0003 $300.00

Size Item # Price1-1/2” Dia.

1/8” Back Mnt 0906-0195 $5.082” Dia.

1/4” Back Mnt 0906-0015 $5.322” Dia.

1/4” Lower Mnt 0906-0010 $5.082” Dia.

1/4” Back Mnt 0906-0154 $5.08

0901-0009 Quart $350.000901-0010 1/2 Gal. $630.00

No.1 3301-0012 $7.50No.2 2707-0060 $7.50



Air C

ompressors

144

144

aIr cOmPrEssOrs

Fitted Hose Sections Flexible Stainless Steel Hoses

Nycoil Spiral Air Hose Premium Flexible Air Hose

Premium Sandblast Hose Suction Hose

Competitor Hose Reels

Worm Drive Clamps Blo Guns/AIR CHUCK

Hannay 1800 Hose Reel

2705-

2702-

Spiral self-storing air hose. Available in 25’ lengths.Sizes: 1/4” & 3/8” ID.

The extra thick inner tube is compounded of special resilient rubber to resist the impact of abrasive and stop static electricity buildup. Hose sizes- 1/2”, 3/4”, 1” and 1-1/4” inside diameters. Available up to 50 ft. lengths.

This flexible suction hose is used on abrasive pickups or dust control equipment. It has a thick, smooth bore for long wear and unobstructed flow. Hose sizes: 2”, 3”, 4”, & 5” inside diameters.

Ideal for storing 1/2” or 3/4” ID air hose. Features a 6 1/4” dia. drum, 1” fpt swivel joint inlet, and 3/4” fpt outlet. Sturdy steel frame construction. Handles 1/2” ID hose up to 500 ft. or 3/4” ID hose in lengths up to 230 ft. Choose either crank rewind or chain and sprocket drive powered by electric or compressed air motor.

Reusable security pressure grip. For hoses from 3/8” to 1-1/2” inside diameter.

2706-

2703-

300 series stainless steel flexible hose provides help in correcting pipe misalignment problems and aides as a vibration isolator. Available in 1/2” through 3” I.D. 12” or 18” overall length.

This hose is molded, braided construction in any length. The oil resisting neoprene tube is protected by two braids and a durable, smooth cover. Light weight and flexible. Hose sizes- 3/8”, 1/2”, 3/4”, 1” and 1-1/4” inside diameters. Available in any length.

• Heavy gauge steel discs with rolled edges to add strength and prevent hose damage • Solid steel frame and drum assembly • Rewind hand crank is solid steel with a roller hand grip • Swivel joint allows reel to rotate smoothly while connected• Self aligning pillow block bearings support the drum assembly • Positive gear drive rewind on all power rewind reels • 3000 psi standard working pressure • Locking pin and tension brake standard on the hand crank model

Hand Crank Model: Air Rewind Model: Electric Model:

OSHA type Blow Gun controls air stream pressure at the nozzle tip, yet provides enough volume for safe air nozzle cleaning. Air Chuck, ideal for re-charging aerosol applicators, inflating tires, etc. Brass construction.

Air hose assembled in 25’ lengths, complete with stopcock in line and nipple in each end. Other lengths to order. No. 1 Assembly- 3/8” inside diameter for Dallett hammers and similar tools. (2702-0010)No. 2 Assembly- 1/2” inside diameter for plug drills, light rotating drills and air grinders. (2702-0009)

2701-

Prices starting at $26.00

Size Item # Price1/2” 2702-0009 $52.953/8” 2702-0010 $52.95

Size Item # Price3/8” 0906-0109 $50.45

Item# Description Price2709-0008 MANUAL CRANK $315.002709-0013 POWER 12 Volt DC $645.002709-0016 ELECTRIC CRANK $705.002709-0017 HYDRAULIC $675.002709-0019 AIR REWIND $775.00

2701-0010 $2.32

2709-0020 $227.00 2709-0032 $553.00 2709-0021 $547.00

2701-0012 $10.00


Our stone countertop training seminar covers the following:• Introduction to Countertop Fabrication• Handling & Transporting Stone Slabs• Countertop Templating & Slab Layout• Countertop Edging & Profiling• Hand Polishing• Sink Templating & Cutting• Rodding

• Faucet Layout• Chip & Scratch Repair• Sealing Stone Countertops• Countertop Installation• Color Matching & Setting Seams• Tricks of the Trade• Drop-in & Undermount Sink Installation

Learn the latesttechniques that saveyou time and money.Expanded facilities nowwith state-of-the-artclassrooms,equipment demos(try before you buy)and one-on-one training.

*Price includes breakfast and lunch. Airfare, hotel accommodations, and evening meals are not included.

GC

T Fa

b. S

emin

ars

145

145

gcT fabrIcaTION sEmINars


146


http://www.concretecountertopspecialties.com/showitem.cfm?itemnum=37&catnum=0




http://www.concretecountertopspecialties.com/laviniarent.cfm

http://www.concretecountertopspecialties.com/showcat.cfm?catnum=51&keyword1=Grinding%20%26%20Shaping

http://www.concretecountertopspecialties.com/showcat.cfm?catnum=56&keyword1=Edge%20Profiling

http://www.concretecountertopspecialties.com/showcat.cfm?catnum=51&keyword1=Grinding%20%26%20Shaping





http://www.concretecountertopspecialties.com/showcat.cfm?catnum=83&keyword1=Mixers

http://www.concretecountertopspecialties.com/showcat.cfm?catnum=55&keyword1=Lifting%20%26%20Handling

147

cONsTrucTION

http://www.granitecitytool.com/construction.cfm?mcatnum=94&keyword1=construction

http://www.granitecitytool.com/showcat.cfm?catnum=131&pcatnum=131&mcatnum=94

http://www.granitecitytool.com/showcat.cfm?catnum=123&pcatnum=123&mcatnum=94

http://www.granitecitytool.com/showcat.cfm?catnum=146&pcatnum=146&mcatnum=94&keyword1=Generators%20and%20Power

http://www.granitecitytool.com/showcat.cfm?catnum=35&pcatnum=35&mcatnum=94&keyword1=Hammer%20%26amp;%20Standard%20Drills

http://www.granitecitytool.com/showcat.cfm?catnum=126&pcatnum=126&mcatnum=94&keyword1=Heating%20Equipment%20%20

http://www.granitecitytool.com/showcat.cfm?catnum=173&pcatnum=173&mcatnum=94&keyword1=Internal%20Vibrator%20Shafts

http://www.granitecitytool.com/showcat.cfm?catnum=124&pcatnum=124&mcatnum=94&keyword1=Shop%20Equipment

http://www.granitecitytool.com/showcat.cfm?catnum=128&pcatnum=128&mcatnum=94&keyword1=Stone%20Splitters%20

http://www.granitecitytool.com/showcat.cfm?catnum=172&pcatnum=172&mcatnum=94&keyword1=Vibratory%20Plates

http://www.granitecitytool.com/showcat.cfm?catnum=129&pcatnum=129&mcatnum=94&keyword1=Wacker

TErms & cONDITIONs

PAYMENT TERMS • ALL PAYMENTS IN U.S. FUNDS ONLY• All invoices are due upon receipt unless stated definitely• Outstanding Invoice 30 days or older will be charged 1.5% interest monthly. • Granite City Tool accepts Visa, MasterCard, American Express, and Discover credit cards. • Orders on account with a past due balance will be shipped only with Credit Card payment. • A $30.00 Fee will be charged to all NSF Checks.

ORDERING • Orders can be placed over the phone, by fax, by mail, or online at www.granitecitytool.com.• There is a $15.00 minimum order required on All ORDERS or an additional $10.00 handling fee will be applied.

SHIPPING • Unless a preference is indicated by the customer, GCT will ship ‘best way’. • If GCT is unable to fill an entire order, partial shipment will be made, unless “Ship Complete” is indicated on order.

FREIGHT • Inspect shipment immediately. Damages or shortages must be reported to the carrier at once, and noted damage on Bill of Lading. • If package arrives damaged, notify carrier immediately. Save all packing and cartons for the carrier to inspect. • GCT must be notified of any shortages within 24 Hours of Receipt. • Freight is FOB St. Cloud, MN unless drop-shipped from the manufacturer.• Additional charges may apply to a factory direct shipment. • All orders to be shipped NEXT DAY must be received by 1:00 pm Central Standard Time (CST). • Normal delivery service anywhere in the continental USA is 1-7 business days guaranteed by the Carrier. • INTERNATIONAL ORDERS: Granite City Tool welcomes orders from all over the world. Freight Charges are dependent upon

weight and dimension of package. A minimum order $100.00 (US funds) is required. The Virgin Islands, Puerto Rico, and other countries will be charged the current international Air Express shipping rate. All duty is paid by the customer.

• Shipments outside the Continental U.S., please call for details. • Fed Ex is available to Alaska and Hawaii. Please call for details.

PRICE CHANGES • Prices and availability are subject to change without notice. • Quoted prices are good for 10 days. • Granite City Tool reserves the right to correct pricing errors on any or all print or any electronic media. • Granite City Tool reserves the right to limit quantities.

RETURNS • 30 Day Return Policy for most unused items. Special Orders or customized products cannot be returned. Additional restocking fees may apply.• All returns need a Return Merchandise Authorization Number (RMA#) from Granite City Tool. To receive an RMA#,

contact a sales person by calling 800-328-7094 or e-mail [email protected]. • Returned items must be unused, missing no parts, and be in a resalable condition to receive full credit.

If you prefer a refund, payment will be in the same form as original payment. • Items eligible to be returned must be postmarked within 30 days of invoiced date or 45 days from shipping. Items returned after

the above set time period, or in non-resalable condition, including marked or damaged manufacturer original packaging, will not be credited. These packages need to be kept in new and resalable condition.

• Once you have received a RMA number, write the RMA number on the packing slip and label. Then ship the item to: Granite City Tool Attn: Returns RMA #__________ 247 28th Ave S Waite Park, MN 56387 • Items returned without a RMA # will be subject to a restocking fee of 20% of the sale price.• Return of non-stock items will be subject to manufacturer’s restocking fee. • NO RETURNS ON PRINTED MATERIALS, VIDEOS, DVDs, OR SOFTWARE.• Replacement items will be billed to customer account until credit is issued when the item is received by Granite City Tool.• Please note that we will refund shipping costs only if the return is a result of our error.

COMMUNICATION • PHONE NUMBER: 1-800-328-7094 OR 320-251-8600 • FAX NUMBER (24 HOURS): 320-259-1817 • EMAIL: [email protected]• WEBSITE: www.GraniteCityTool.com

HOURS • Granite City Tool is open for phone orders: Monday thru Friday 7:00 am to 6:00pm Central Std Time Saturday 8:00 am to 12:00 pm• Closed New Years Day, Memorial Day, July 4th, Labor Day, Thanksgiving, Christmas Day

WARRANTY • All warranty claim are subject to approval for credit by the manufacturer. • Shipping costs are subject to manufacturer’s policy.


maIl/faX OrDEr sHEET

BILL TO: SHIP TO: Customer Phone # E-Mail Customer Fax # Contact Via Customer PO Salesman Credit Card #

EXP V-Code Terms

Item # Quantity Description Unit Price Total

Total

Prices and terms are subject to approval and acceptance by St. Cloud office. All terms to be cash unless credit arrangements made. Invoices due payable 30 days from date issued. Buyer agrees to pay all collection charges and reasonable attorney fees where required to secure payment of account.

PurchaserBy

CUST ID MAIL: 247 28th Ave. S. Waite Park, MN 56387Sales Order # FAX: 866-522-1817Date 20


Fax or Mail Application to:

Granite City Tool Phone: (800) 328-7094

Fax: (866) 522-1817247 28th Ave S [email protected] Waite Park, MN 56387 www.granitecitytool.com

Lessee Company Information

Company Name ________________________________________________________________________________________________________________

Company Address ______________________________________________________________________________________________________________

E-mail _________________________________________________________________________________________________________________________ Phone ( ________ )_________________________________________________ Fax ( ________ ) _________________________________________________

Signer _________________________________________________________________________________________________________________________

Title ___________________________________________________________________________________________________________________________

State Corp. Filing # ______________________________________________________________________________________________________________

Type of Business: Non-Pro�t Partnership Proprietorship Corporation

Number of Years in Business ______________________________________ Annual Sales _________________________________________________

Personal Information on O�cers, Partners, or Guarantors

Name _________________________________________________________________________ Title ___________________________________________

SSN _____________________________________________ % Ownership ____________________ Phone ( _______ ) __________________________

Home Address __________________________________________________________________________________________________________________

Name _________________________________________________________________________ Title ___________________________________________

SSN _____________________________________________ % Ownership ____________________ Phone ( ________ ) _________________________

Home Address __________________________________________________________________________________________________________________

Lease Term

Term _________________________________________________________________ Monthly Payment: $ _____________________________________

Advance Payments: 1 2 3 Other Purchase Option: FMV $1 10% Other

Vendor Information

Vendor Name _________________________________________ Contact ____________________________________________________________

Phone ( ______ ) __________________________ E-mail _______________________________________________________________________________

Equipment Information

Address (if di�erent from Company address) _____________________________________________________________________________

Equipment Description ___________________________________________________________ Equipment Cost ______________________________

Applicant _____________________________________________________________ Signature ______________________________________________

Title __________________________________________________________________ Date ___________________________________________________

Applicant _____________________________________________________________ Signature ______________________________________________

Title __________________________________________________________________ Date ___________________________________________________

Lease Application



maIl/faX OrDEr sHEET

BILL TO: SHIP TO: Customer Phone # E-Mail Customer Fax # Contact Via Customer PO Salesman Credit Card #

EXP V-Code Terms

Item # Quantity Description Unit Price Total

Total

Prices and terms are subject to approval and acceptance by St. Cloud office. All terms to be cash unless credit arrangements made. Invoices due payable 30 days from date issued. Buyer agrees to pay all collection charges and reasonable attorney fees where required to secure payment of account.

PurchaserBy

CUST ID MAIL: 247 28th Ave. S. Waite Park, MN 56387Sales Order # FAX: 866-522-1817Date 20


crEDIT aPPlIcaTION

Full Company Name: ____________________________________________________________________

Address: ______________________________________________________________________________

City:_________________________________________State:_______________Zip:__________________

Business Phone: ________________________________Fax: ___________________________________

Company Tax Id or Owner Social Security Number: ____________________________________________

Full Name of Company Manager or Owner: __________________________________________________

Ship to Address: _______________________________________________________________________

City: ________________________State: _______Zip:___________ Home Phone: ___________________

Type of Business: _________________________________________________________ Length of Time Doing Business at this Address: ________________________________ Length of Time in Business: ________________________________________________

Trade References: (Be sure to INCLUDE FAX #)

Name _______________________________________ Name_________________________________________Address _____________________________________ Address________________________________________City, State, Zip _______________________________ City, State, Zip___________________________________Phone # _____________________________________ Phone _________________________________________Fax# _______________________________________ Fax# __________________________________________

Name ______________________________________ Name _________________________________________Address _____________________________________ Address _______________________________________City, State, Zip _______________________________ City, State, Zip __________________________________Phone # _____________________________________ Phone # _______________________________________Fax # _______________________________________ Fax # _________________________________________

Name of Bank____________________________________________________________ Address ________________________________________________________________ Checking _______________________________________________________________ Address ________________________________________________________________ Loans __________________________________________________________________ Address ________________________________________________________________

I/we hereby authorize Granite City Tool Company or its representatives to contact the above listed persons or businesses for the purpose of determining my credit rating, and such other financial information, which such firms may have with respect to my company that will be useful in determining my credit worthiness.

For consideration of the extension of credit to the firm named, herein, I/we promise to pay to the order of Granite City Tool Company Inc, 247 28th Avenue South, Waite Park, Minnesota all charges to the account of the firm shown herein with in 30 days of invoice date. A finance charge of 1-1/2% per month, which is an annual percentage rate of 18% will be due on all accounts more that 30 days old. There is a $30.00 service charge on all returned checks.

I/we further agree that if payment of said account is not made on or before the due date(s), the account is placed in the hands of an attorney for collection or suit is brought on the same, or same is collected through probate or bankruptcy proceedings, and additional reasonable amount shall be added to the same as attorney fees.

Signature_____________________________________ Date ______________________ Title _________________________________________

I/we agree that in the event that the said account should default on payment of account, I will be personally responsible for payment of the same in accordance with above terms.

Signature(s) ___________________________________ Date ______________________

Local: (320) 251-8600 FAX: (320) 259-1817247 28TH Avenue South Waite Park, MN 56387


























http://www.granitecitytool.com/denver.cfm

http://www.granitecitytool.com/denver.cfm

Documents

Granite City Tool 2010