Grade 80 Fittings - Yoke Lifting Products and US Rigging ... · PDF file1600 East McFadden Ave. Santa Ana, CA 92705. Toll Free: 1-888-260-7444 • Local: 714-545-7444 . A B K T A H

1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444

www.yokeusa.com

IL

D

IW

D

IL

IW

iw

ild

IWD

IL

ß

NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING

Grade 80 Fittings

Extra width inside allows better works on large crane hooks.

Oblong Master Link, Code "MF". Connected to Chain with "YA" connecting link.

※ Forged Oblong Master Links. ※※ Welded Oblo ng Master Links. Design factor 4:1 proof tested and certified Tested acc. to EN 1677-1

* Forged Oblong Master Links. ★ Design factor 5:1 Proof tested and certified WLL=Working Load Limit Tested ace. to EN 1677-1

★ Proof tested and certified WLL=Working Load Limit

Oblong Master Link with Flat. Code"MFF"Connected to Chain with "YO" Omega Link.

Enlarge Oblong Master Link Assembly. Code" MFA"Designed for use with chain & wire rope.

Item No.TradeSize

Chain Size(inch)

WorkingLoad Limit Dimensions (inch) N.W.

inch 1-Leg 2-Leg Lbs* IL IW D Lbs8-003-06 ※ 3/8 7/32 -- 3,000 3.94 2.36 0.43 0.48-003-0806 ※ 1/2 1/4~5/16 7/32 4,920 4.72 2.76 0.55 0.98-003-1008 ※ 5/8 3/8 1/4~5/16 6,600 5.51 3.15 0.67 1.58-003-13 ※ 3/4 1/2 -- 10,320 5.91 3.54 0.75 2.48-003-1310 ※ 7/8 1/2 3/8 14,040 6.30 3.74 0.87 3.38-003-16 ※ 1 5/8 -- 24,360 7.48 4.33 0.98 4.98-003-1613 ※ 1-1/8 5/8 1/2 27,000 7.09 4.13 1.10 6.28-003-19 ※ 1-1/4 3/4 -- 35,160 7.87 4.72 1.18 8.48-003-2216 ※ 1-3/8 7/8 5/8 42,000 9.45 5.51 1.34 12.18-003-26 ※ 1-1/2 1 -- 47,880 9.84 5.91 1.50 15.48-003-2619 ※ 1-5/8 1 3/4 60,600 9.84 5.91 1.57 17.68-003-3222 ※ 1-3/4 1-1/4 7/8 62,520 11.81 7.09 1.77 28.08-003-3226 ※ 2 1-1/4 1 97,680 13.77 7.67 1.96 36.68-003-3632 ※ 2-1/4 -- 1-1/4 119,400 16.14 8.66 2.28 57.38-003-40 ※ 2-3/4 -- -- 178,200 19.29 10.43 2.75 100.1

Item No.TradeSize

Chain Size(inch)

WorkingLoad Limit Dimensions (inch) N.W.

inch 1-Leg 2-Leg Lbs* IL IW D Lbs8-003F-06 ※ 3/8 7/32 -- 3,000 3.94 2.36 0.43 0.48-003F-0806 ※ 1/2 1/4~5/16 7/32 4,920 4.72 2.76 0.55 0.98-003F-1008 ※ 5/8 3/8 1/4~5/16 6,600 5.51 3.15 0.67 1.58-003F-1310 ※ 7/8 1/2 3/8 14,040 6.30 3.74 0.87 3.38-003F-1613 ※ 1-1/8 5/8 1/2 27,000 7.09 4.13 1.10 5.98-003F-2216 ※ 1-3/8 3/4 5/8 42,000 9.45 5.51 1.34 12.18-003F-2619 ※ 1-5/8 1 3/4 60,600 9.84 5.91 1.57 17.4

Item No.WLL(Lbs)

ß 0-45°WLL(Lbs)ß 45° -60°

ForGrade 80

Chain (inch) Dimensions (inch) N.W.4:1 5:1 4:1 5:1 3 or 4 legs D IW IL d iw il Lbs

8-007-06 3.4 2.7 7,000 5,600 7/32 0.63 2.40 4.72 0.51 1.97 3.54 2.68-007-08 4.2 3.4 17,600 14,100 1/4~5/16 0.87 3.54 6.38 0.79 2.76 5.50 3.38-007-10 6.8 5.4 23,300 18,700 3/8 1.10 4.33 7.87 0.87 2.76 5.51 7.98-007-13 11.5 9.2 37,200 29,800 1/2 1.42 5.50 10.63 1.10 3.54 7.28 12.18-007-16 18.8 15.0 47,100 37,700 5/8 1.57 6.10 11.02 1.26 4.33 7.87 26.58-007-20 29.3 23.4 57,500 46,000 3/4 1.77 6.89 12.60 1.42 4.92 8.86 51.88-007-22 36.4 29.1 73,600 58,900 7/8 1.97 7.68 13.78 1.57 5.12 10.24 71.28-007-26 51.9 41.5 99,600 79,700 1 2.36 8.66 16.14 1.87 7.68 13.78 134.58-007-32 69.6 55.6 132,000 105,600 1-1/4 2.76 10.43 19.29 2.36 8.66 16.14 223.3

92

1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444www.yokeusa.com

A

B

K

T

A

H

L

G

D

R

W

K


Grade 80 Fittings

Grade 80 Lifting Chain, Natural Finish. Code "Y"

Clevis Master Link. Code "YG"

D Master Link. Code "DA"

★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1


★ Design factor 5:1 Proof tested and certified Tested ace. to EN 1677-1

Item No.Working

Load LimitWire Dia A B

LengthPer drum N.W.

LbsLbs* tonnes* inch inch inch meters ft Per ft

8-009-06 2,500 1.12 7/32 0.71 0.31 500 1,804 1.78-009-07 3,500 1.5 9/32 0.83 0.36 500 1,640 2.28-009-08 4,500 2.0 5/16 0.95 0.41 350 1,148 3.18-009-10 7,100 3.15 3/8 1.18 0.51 250 820 4.88-009-13 12,000 5.3 1/2 1.54 0.67 150 492 8.28-009-16 18,100 8.0 5/8 1.89 0.82 100 328 12.58-009-20 28,300 12.5 3/4 2.36 1.02 60 197 19.68-009-22 34,200 15.0 7/8 2.60 1.13 50 164 23.88-009-26 47,700 21.2 1 3.07 1.33 30 98 33.38-009-32 72,300 31.5 1-1/4 3.78 1.64 25 82 49.6

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch A K L G T H Lbs

8-059-07 4,500 2.0 1/4~5/16 0.35 3.90 3.15 2.56 0.59 0.59 0.98-059-10 7,100 3.15 3/8 0.43 4.92 3.94 3.15 0.75 0.71 1.88-059-13 12,000 5.3 1/2 0.55 6.62 5.35 4.25 0.98 0.87 3.38-059-16 18,100 8.0 5/8 0.71 7.80 6.50 4.88 1.07 1.02 5.3

Item No.Working

Load Limit Dimensions (inch) N.W.Lbs* tonnes* A D K R Lbs

8-056-14 5,500 2.5 2.17 0.55 2.68 0.94 0.68-056-17 8,800 4.0 2.52 0.67 2.56 1.14 1.38-056-22 17,600 8.0 2.99 0.87 3.66 1.30 2.48-056-26 22,000 10.0 2.64 1.02 3.58 1.34 3.78-056-28 26,400 12.0 3.19 1.10 4.37 1.61 4.28-056-32 35,200 16.0 3.98 1.38 5.20 1.97 8.6

93


www.yokeusa.com

B

A

K

D

D

B

A

K

KD

P

T

8-PM015


Grade 80 Fittings

Connecting Link, Code " YA "


Connecting Link, Dacormet®Surface Finish.**


Omega Link. Code"YO"


special pin and sleeve designed for more often re-use purpose.

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K A D B Lbs

8-015-05 1,500 0.8 3/16 1.39 0.39 0.24 0.51 0.08 8-015-06 2,100 1.12 7/32 1.73 0.59 0.28 0.67 0.28-015-07 4,500 2.0 1/4~5/16 2.25 0.71 0.35 0.89 0.48-015-10 7,100 3.15 3/8 2.68 0.99 0.50 1.06 0.78-015-13 12,000 5.3 1/2 3.58 1.19 0.62 1.38 1.58-015-16 18,100 8.0 5/8 3.94 1.42 0.75 1.51 2.48-015-20 28,300 12.5 3/4 4.80 1.65 0.87 1.81 4.28-015-22 34,200 15.0 7/8 5.98 1.93 0.94 2.32 6.68-015-26 47,700 21.2 1 6.38 2.17 1.19 2.44 10.48-015-32 72,300 31.5 1-1/4 7.96 2.72 1.42 3.11 19.4

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K A D B Lbs

8-M015-05 1,500 0.8 3/16 1.39 0.39 0.24 0.51 0.08 8-M015-06 2,100 1.12 7/32 1.73 0.59 0.28 0.67 0.28-M015-07 4,500 2.0 1/4~5/16 2.25 0.71 0.35 0.89 0.48-M015-10 7,100 3.15 3/8 2.68 0.99 0.50 1.06 0.78-M015-13 12,000 5.3 1/2 3.58 1.19 0.62 1.38 1.58-M015-16 18,100 8.0 5/8 3.94 1.42 0.75 1.51 2.48-M015-20 28,300 12.5 3/4 4.80 1.65 0.87 1.81 4.28-M015-22 34,200 15.0 7/8 5.98 1.93 0.94 2.32 6.68-M015-26 47,700 21.2 1 6.38 2.17 1.19 2.44 10.48-M015-32 72,300 31.5 1-1/4 7.96 2.72 1.42 3.11 19.4

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K D T P Lbs

8-018-06 2,100 1.12 7/32 1.18 0.83 0.35 0.31 0.28-018-07 4,500 2.0 1/4~5/16 1.42 1.06 0.44 0.35 0.48-018-10 7,100 3.15 3/8 1.73 1.26 0.59 0.47 0.98-018-13 12,000 5.3 1/2 2.17 1.65 0.67 0.62 1.88-018-16 18,100 8.0 5/8 2.72 1.96 0.89 0.71 3.38-018-20 28,300 12.5 3/4 2.79 2.28 1.08 0.85 4.6

94

D

K

H

T

P

A

P

K

H

T

A

PP


Copyright © 2012YOKE Industrial Corp.All Rights Reserved.

Grade 80 FittingsHow to use YOKE Self Locking Hook?



Eye Self Locking Hook. Code "YC"

Clevis Self Locking Hook. Code"YD"

Push trigger to open Hook

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W. Lbs* tonnes* inch K P A D T H Lbs

8-025-06 2,100 1.12 7/32 4.33 1.14 0.83 0.39 0.59 0.75 1.18-025-07 4,500 2.0 1/4~5/16 5.35 1.34 0.98 0.44 0.79 0.94 1.88-025-10 7,100 3.15 3/8 6.57 1.77 1.26 0.51 1.02 1.19 3.18-025-13 12,000 5.3 1/2 8.15 2.13 1.56 0.62 1.19 1.57 6.48-025-16 18,100 8.0 5/8 9.92 2.44 2.05 0.83 1.42 1.93 12.68-025-20 28,300 12.5 3/4 11.10 3.54 2.52 0.91 1.91 2.36 18.78-025-22 34,200 15.0 7/8 12.56 3.14 2.75 0.94 2.12 2.48 27.68-025-26 47,700 21.2 1 13.50 3.90 3.15 0.98 2.20 2.72 32.08-025-28 55,100 24.8 1-1/8 15.80 4.72 3.54 1.10 2.48 3.18 54.9

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch A K P T H Lbs

8-026-06 2,100 1.12 7/32 0.24 3.94 1.14 0.59 0.75 1.18-026-07 4,500 2.0 1/4~5/16 0.35 4.69 1.34 0.79 0.94 1.88-026-10 7,100 3.15 3/8 0.43 5.63 1.77 1.02 1.19 3.18-026-13 12,000 5.3 1/2 0.55 7.05 2.13 1.19 1.57 6.48-026-16 18,100 8.0 5/8 0.71 8.35 2.44 1.42 1.93 12.48-026-20 28,300 12.5 3/4 0.83 9.56 3.54 1.91 2.36 19.48-026-22 34,200 15.0 7/8 0.95 10.70 3.14 2.12 2.48 28.2



www.yokeusa.comNEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING

Grade 80 Fittings

Swivel Self Locking Hook, with brass bushing. Code" YE "

Swivel Self Locking Hook, with ball bearing. Code "YEN"Ball bearing performs to fully swivel under load.

Shank Self Locking Hook. Code "YEA"



** d min. = the smallest shank dimension after machining. Note: After machining the shank, proof loading must be carried out.★ Design factor 4:1

WARNING INFORMATION:This hook is a positioning device and is not intended to rotate under load. For swivel hooks designed to rotate under load, see pages 92 8-027N .

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W. Lbs* tonnes* inch K P B A D T H Lbs

8-027-06 2,100 1.12 7/32 5.86 1.14 0.87 1.26 0.44 0.59 0.75 1.58-027-07 4,500 2.0 1/4~5/16 7.32 1.34 1.14 1.42 0.51 0.79 0.94 2.68-027-10 7,100 3.15 3/8 8.66 1.77 1.34 1.63 0.62 1.02 1.19 4.48-027-13 12,000 5.3 1/2 10.51 2.09 1.70 1.81 0.83 1.19 1.57 9.08-027-16 18,100 8.0 5/8 12.91 2.44 1.97 2.36 0.91 1.42 1.93 15.98-027-20 28,300 12.5 3/4 15.28 3.54 3.23 2.91 1.02 1.91 2.36 24.98-027-22 34,200 15.0 7/8 17.99 3.14 3.74 3.82 1.30 2.12 2.48 39.58-027-26 47,700 21.2 1 21.06 3.90 4.53 4.13 1.65 2.20 2.72 62.4

Item No.Working

Load Limit

ForGrade 80


8-027N-06 2,100 1.12 7/32 5.86 1.14 0.87 1.26 0.44 0.59 0.75 1.58-027N-07 4,500 2.0 1/4~5/16 7.32 1.34 1.14 1.42 0.51 0.79 0.94 2.68-027N-10 7,100 3.15 3/8 8.66 1.77 1.34 1.63 0.62 1.02 1.19 4.48-027N-13 12,000 5.3 1/2 10.51 2.09 1.70 1.81 0.83 1.19 1.57 9.08-027N-16 18,100 8.0 5/8 12.91 2.44 1.97 2.36 0.91 1.42 1.93 16.18-027N-20 28,300 12.5 3/4 15.28 3.54 3.23 2.91 1.02 1.91 2.36 25.18-027N-22 34,200 15.0 7/8 17.99 3.14 3.74 3.82 1.30 2.12 2.48 39.98-027N-26 47,700 21.2 1 21.06 3.90 4.53 4.13 1.65 2.20 2.72 65.0

Item No.Working

Load Limit Dimensions (inch) N.W.Lbs* tonnes* K P K1 D d min.** T H Lbs

8-024-06 2,100 1.12 3.54 1.14 1.46 0.83 0.44 0.59 0.75 1.18-024-07 4,500 2.0 4.53 1.38 1.69 1.98 0.51 0.79 0.94 2.08-024-10 7,100 3.15 5.31 1.77 1.89 1.14 0.62 1.02 1.19 3.38-024-13 12,000 5.3 6.73 2.09 2.52 1.34 0.79 1.19 1.57 6.68-024-16 18,100 8.0 8.03 2.44 2.95 1.46 0.98 1.42 1.93 12.18-024-20 28,300 12.5 8.62 3.54 3.54 1.69 1.50 1.91 2.36 19.08-024-22 34,200 15.0 9.88 3.14 4.53 2.01 1.77 2.12 2.48 26.08-024-26 47,700 21.2 10.67 3.90 5.94 2.56 1.97 2.20 2.72 37.2

96


A

K

H

T

P P

AD

B

K

H

P

T

AD

B

K

H

T

P


Grade 80 Fittings




Clevis Swivel Self Locking Hook, with ball bearing. Code " KP "Ball bearing performs to fully swivel under load

Eye Swivel Hook, with brass bushing. Code " YSW "

Eye Swivel Hook, with ball bearing. Code "YSWN " Ball bearing performs to fully swivel under load.

WARNING INFORMATION:This hook is a positioning device and is not intended to rotate under load. For swivel hooks designed to rotate under load, see pages 93 8-049N.

Item No.Working

Load Limit

ForGrade 80


8-022-06 2,100 1.12 7/32 0.24 6.14 1.14 0.59 0.75 1.88-022-07 4,500 2.0 1/4~5/16 0.35 7.40 1.34 0.79 0.94 2.98-022-10 7,100 3.15 3/8 0.43 8.46 1.77 1.02 1.19 4.98-022-13 12,000 5.3 1/2 0.55 10.83 2.13 1.19 1.57 9.98-022-16 18,100 8.0 5/8 0.71 12.72 2.44 1.42 1.93 17.48-022-20 28,300 12.5 3/4 0.83 16.45 3.54 1.91 2.36 27.6

Item No.Working

Load Limit

ForGrade 80


8-049-06 2,100 1.12 7/32 5.35 0.94 0.88 1.26 0.44 0.64 0.74 1.38-049-07 4,500 2.0 1/4~5/16 6.10 1.02 1.06 1.42 0.51 0.71 0.87 1.98-049-10 7,100 3.15 3/8 7.44 1.42 1.46 1.63 0.62 0.91 1.14 3.58-049-13 12,000 5.3 1/2 9.17 1.65 1.57 1.81 0.83 1.10 1.38 7.18-049-16 18,100 8.0 5/8 11.02 1.97 1.97 2.36 0.91 1.38 1.73 11.78-049-20 28,300 12.5 3/4 14.00 2.20 3.23 2.91 1.02 1.91 2.56 20.3

Item No.Working

Load Limit

ForGrade 80


8-049N-06 2,100 1.12 7/32 5.35 0.94 0.88 1.26 0.44 0.64 0.74 1.38-049N-07 4,500 2.0 1/4~5/16 6.10 1.02 1.06 1.42 0.51 0.71 0.87 2.08-049N-10 7,100 3.15 3/8 7.44 1.42 1.46 1.63 0.62 0.91 1.14 3.58-049N-13 12,000 5.3 1/2 9.17 1.65 1.57 1.81 0.83 1.10 1.38 7.58-049N-16 18,100 8.0 5/8 11.02 1.97 1.97 2.36 0.91 1.38 1.73 11.78-049N-20 28,300 12.5 3/4 14.00 2.20 3.23 2.91 1.02 1.91 2.56 20.5

97


www.yokeusa.com

D

A

K

H

T

P1

D

A

K

H

T

P

D

A

K

H

T

P


Grade 80 Fittings

to protect latch to protect latch




Eye Sling Hook, with latch. Code "YP"

Eye Sling Hook，with latch. Code "EL"

Eye Foundry Hook. Code "YN"

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P1 A D T H Lbs

8-044/S-06 2,100 1.12 7/32 3.15 0.94 0.79 0.35 0.63 0.79 0.78-044/S-07 4,500 2.0 1/4~5/16 3.86 1.18 0.98 0.43 0.75 0.91 1.18-044/S-10 7,100 3.15 3/8 4.76 1.42 1.26 0.59 0.91 1.22 2.08-044/S-13 12,000 5.3 1/2 5.98 1.69 1.57 0.71 1.10 1.50 4.28-044/S-16 18,100 8.0 5/8 7.20 1.85 1.97 0.87 1.29 1.85 7.18-044/S-20 28,300 12.5 3/4 8.54 1.77 2.36 1.06 1.69 1.89 12.68-044/S-22 34,200 15.0 7/8 9.45 2.75 2.01 1.26 1.97 2.44 20.18-044/S-26 47,700 21.2 1 10.63 3.15 2.60 1.34 2.36 3.15 30.08-044/S-32 72,300 31.5 1-1/4 13.86 4.49 3.50 1.57 2.56 3.39 41.2

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P A D T H Lbs

8-039-06 2,100 1.12 7/32 3.15 0.90 0.78 0.35 0.63 0.75 0.78-039-07 4,500 2.0 1/4~5/16 4.29 1.10 1.02 0.62 0.94 0.90 1.58-039-10 7,100 3.15 3/8 5.39 1.29 1.33 0.76 1.02 1.18 2.68-039-13 12,000 5.3 1/2 6.81 1.57 1.65 0.90 1.37 1.45 5.58-039-16 18,100 8.0 5/8 7.28 1.73 2.04 1.10 1.41 1.81 8.2

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P A D T H Lbs

8-047-07 4,500 2.0 1/4~5/16 4.84 2.44 0.94 0.47 0.79 1.18 1.58-047-10 7,100 3.15 3/8 5.91 2.87 1.26 0.59 0.94 1.34 2.98-047-13 12,000 5.3 1/2 7.09 3.50 1.56 0.75 1.34 1.65 5.38-047-16 18,100 8.0 5/8 8.46 3.94 1.96 0.98 1.63 1.97 8.88-047-20 28,300 12.5 3/4 9.76 4.41 2.36 1.10 1.81 2.25 20.7

98


P1

T

H

K

A

G

KL

W

A

C

M

K

H

T

P

A


Grade 80 Fittings

Clevis Sling Hook，with latch. Code"YM"

Clevis Shackle. Code"YR"

Clevis C Hook. Code"FE"




Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch A K P1 T H Lbs

8-043/S-06 2,100 1.12 7/32 0.24 3.07 0.87 0.59 0.70 0.78-043/S-07 4,500 2.0 1/4~5/16 0.35 3.74 1.18 0.75 0.91 1.38-043/S-10 7,100 3.15 3/8 0.43 4.72 1.42 0.91 1.14 2.68-043/S-13 12,000 5.3 1/2 0.55 5.79 1.73 1.10 1.50 5.18-043/S-16 18,100 8.0 5/8 0.71 6.65 1.81 1.54 1.65 8.48-043/S-20 28,300 12.5 3/4 0.83 7.87 2.20 1.85 2.01 14.8

Item No.Working

Load Limit

ForGrade 80


8-097-07 4,500 2.0 1/4~5/16 0.35 3.15 0.75 0.71 0.87 1.18-097-10 7,100 3.15 3/8 0.43 4.13 1.02 0.94 1.02 2.08-097-13 12,000 5.3 1/2 0.55 5.43 1.34 1.26 1.34 4.68-097-16 18,100 8.0 5/8 0.71 6.69 1.50 1.46 1.77 7.9

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W. Lbs* tonnes* inch A K L W G M C Lbs

8-066-07 4,500 2.0 1/4~5/16 0.35 2.32 1.38 1.30 1.34 0.63 3.11 0.98-066-10 7,100 3.15 3/8 0.43 3.07 1.89 1.46 1.57 0.79 3.66 1.88-066-13 12,000 5.3 1/2 0.55 3.86 2.52 1.93 1.73 0.87 4.65 3.18-066-16 18,100 8.0 5/8 0.71 4.41 2.72 2.36 2.13 1.10 5.55 5.5

99


www.yokeusa.com

A

K

T

C

P

E

L

D

B


Grade 80 Fittings

Clevis Forest Hook. Code"YT"

Clevis Choker. Code"YF"

Item No.8-Tag-03Sling Tag, Aluminum.

Item No.8-Tag-04Sling Tag, Stainless



Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P T A C Lbs

8-075-06 2,100 1.12 7/32 1.85 0.31 0.67 0.31 1.02 0.78-075-07 4,500 2.0 1/4~5/16 2.28 0.39 0.71 0.35 1.26 1.18-075-10 7,100 3.15 3/8 3.23 0.47 0.83 0.51 1.77 2.08-075-13 12,000 5.3 1/2 3.93 0.62 1.06 0.55 1.85 3.7

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch L B E D Lbs

8-091-06 3,500 1.5 7/32~1/4 3.09 0.57 0.35 0.63 1.18-091-08 4,500 2.0 5/16 3.23 0.61 0.37 0.67 1.3

100


P

K

A

G

F

A

K

H

P

L

F

F D

E

A

B

C


Grade 80 Fittings

Spring Locking Pin, for safety purpose.

Push to Release

Eye Grab Hook. Code"YH"

Clevis Grab Hook.Code "YK"

Clevis Clutch - Locking Type. Code"KCK"

Not for use with Omega Link Item. 8-018 No reduction of working load limit, thanks to supporting wings which prevent chain link deformation.

Not for use with Omega Link Item. 8-018 No reduction of working load limit, thanks to supporting wings which prevent chain link deformation.

★ Size 32mm supplied without flat wing.★ Design factor 4:1 proof tested and certified.

Tested ace. to DIN EN 1677-1

★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1


Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch P A G K F Lbs

8-041-06 2,100 1.12 7/32 0.31 0.51 0.31 2.01 0.98 0.48-041-07 4,500 2.0 1/4~5/16 0.39 0.59 0.35 2.36 1.18 0.78-041-10 7,100 3.15 3/8 0.51 0.79 0.51 3.22 1.61 1.38-041-13 12,000 5.3 1/2 0.63 0.98 0.59 4.02 2.05 3.18-041-16 18,100 8.0 5/8 0.79 1.18 0.79 5.16 2.24 4.98-041-20 28,300 12.5 3/4 0.91 1.49 0.91 5.75 2.87 8.48-041-22 34,200 15.0 7/8 1.02 1.50 1.02 6.42 2.76 10.18-041-26 47,700 21.2 1 1.14 1.81 1.26 8.07 3.94 22.78-041-32 72,300 31.5 1-1/4 1.53 2.28 1.61 10.51 5.00 44.1

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch P A F K H L Lbs

8-042-06 2,100 1.12 7/32 0.31 0.28 0.98 1.61 0.63 3.11 0.48-042-07 4,500 2.0 1/4~5/16 0.39 0.35 1.18 2.17 0.98 3.66 0.78-042-10 7,100 3.15 3/8 0.51 0.47 1.61 3.03 1.38 5.04 1.88-042-13 12,000 5.3 1/2 0.63 0.59 2.09 3.82 1.65 5.98 3.58-042-16 18,100 8.0 5/8 0.79 0.67 2.22 4.47 1.77 7.66 6.28-042-20 28,300 12.5 3/4 0.91 0.91 3.86 4.88 2.13 8.54 11.0

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch A B C D E F Lbs

8-061-06 2,100 1.12 7/32 0.28 0.28 0.39 0.28 0.71 1.97 0.78-061-07 4,500 2.0 1/4~5/16 0.37 0.37 0.40 0.39 0.94 2.22 1.18-061-10 7,100 3.15 3/8 0.47 0.45 0.45 0.47 1.10 2.59 2.08-061-13 12,000 5.3 1/2 0.59 0.59 0.63 0.63 1.54 3.46 4.68-061-16 18,100 8.0 5/8 0.71 0.83 0.72 0.75 1.90 4.06 8.28-061-20 28,300 12.5 3/4 0.91 0.91 0.91 0.83 2.17 5.18 12.6

101


www.yokeusa.com

A

C

B

E

FD

G

K

A

T

F

B

C

A

LK


Grade 80 Fittings

Clevis Clutch. Code "KC"

Eye Shortening Hook. Code"KD"

Clevis Traveling Clutch. Code "KR"




Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch A,B C D E F Lbs

8-060-06 2,100 1.12 7/32 0.26 0.31 0.28 0.43 1.77 0.48-060-07 4,500 2.0 1/4~5/16 0.34 0.39 0.35 0.63 2.44 1.18-060-10 7,100 3.15 3/8 0.49 0.55 0.47 0.98 3.43 2.28-060-13 12,000 5.3 1/2 0.65 0.67 0.59 1.26 4.53 4.48-060-16 18,100 8.0 5/8 0.81 0.75 0.75 1.54 5.63 7.18-060-20 28,300 12.5 3/4 0.85 0.91 0.87 1.81 5.98 10.8

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K G A T F Lbs

8-062-06 2,100 1.12 7/32 2.13 1.50 0.79 0.39 1.38 0.48-062-07 4,500 2.0 1/4~5/16 2.64 1.93 0.98 0.47 1.73 1.18-062-10 7,100 3.15 3/8 2.95 2.36 1.26 0.55 2.24 2.08-062-13 12,000 5.3 1/2 4.17 3.15 1.57 0.75 2.87 4.28-062-16 18,100 8.0 5/8 5.16 3.82 1.97 0.87 3.46 7.78-062-20 28,300 12.5 3/4 6.30 4.49 2.36 1.06 4.21 12.8

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K A B C L Lbs

8-064-06 2,100 1.12 7/32 2.52 0.28 1.22 0.31 3.39 0.48-064-07 4,500 2.0 1/4~5/16 2.87 0.39 1.73 0.39 4.09 0.98-064-10 7,100 3.15 3/8 3.23 0.43 2.40 0.51 4.76 1.5

102


A

PLK

BC

HT

L

A

K

B


Grade 80 Fittings

Clutch Sling Hook - Locking Clutch. Code"EF"

New Solution Old Fashion


Double End Claw, with fixed pin. Code"KT"


Patent

INNOVATION

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch A B C K H P L T Lbs

8-077-06 2,100 1.12 7/32 0.28 0.28 0.67 4.00 0.71 0.85 5.33 0.61 1.18-077-07 4,500 2.0 1/4~5/16 0.38 0.40 0.94 4.85 0.93 1.04 6.75 0.72 1.8 8-077-10 7,100 3.15 3/8 0.47 0.47 1.10 5.85 1.34 1.32 8.40 0.93 3.88-077-13 12,000 5.3 1/2 0.60 0.63 1.14 7.05 1.46 1.71 10.06 1.18 7.58-077-16 18,100 8.0 5/8 0.80 0.75 1.90 8.36 1.66 1.80 12.00 1.54 12.4

ItemNo.Working

LoadLimit

ForGrade80

Chain Dimensions(inch) N.W.Lbs* tonnes* inch A K B L Lbs

8-065-06 2,100 1.12 7/32 0.28 2.87 1.46 3.70 0.78-065-07 4,500 2.0 1/4~5/16 0.39 3.90 1.89 4.88 1.38-065-10 7,100 3.15 3/8 0.51 4.88 2.36 6.10 2.78-065-13 12,000 5.3 1/2 0.59 5.91 2.95 7.68 5.78-065-16 18,100 8.0 5/8 0.75 7.60 3.70 9.72 11.5

103


www.yokeusa.com

B

A

C

L F D

E

D

K

F

E

G

A

H

C


Grade 80 Fittings

Shortening Clutch. Code"EX"

Shortening Clutch, with Half Link



Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch A B C D E F Lbs

8-072-07 4,500 2.0 1/4~5/16 0.47 0.79 0.39 0.91 2.76 5.00 1.38-072-10 7,100 3.15 3/8 0.51 1.02 0.47 1.14 3.43 6.18 2.48-072-13 12,000 5.3 1/2 0.59 1.30 0.63 1.46 4.53 7.95 5.38-072-16 18,100 8.0 5/8 0.83 1.54 0.75 1.81 5.63 10.00 10.1

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch A X D B C D E F Lbs

8-078-07 4,500 2.0 1/4~5/16 0.47 0.79 0.39 0.91 2.76 0.89 0.35 5.04 1.58-078-10 7,100 3.15 3/8 0.51 1.02 0.47 1.14 3.43 1.06 0.50 6.06 2.98-078-13 12,000 5.3 1/2 0.59 1.30 0.63 1.46 4.53 1.38 0.62 7.99 6.28-078-16 18,100 8.0 5/8 0.83 1.54 0.75 1.81 5.63 1.51 0.75 9.76 11.7

104


A

A

8-067-45LT

8-067-45RH

8-067-STR


Grade 80 Fittings

Eye Container Hook. Code"KA"

Clevis Container Hook. Code"KB"

Clevis Container Link. with spring gate, Code"KU"

★ Design factor 4:1 proof tested and certified.



Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch A P C T H K Lbs

8-068-13 12,000 5.3 1/2 0.59 2.17 2.05 1.10 1.73 7.48 7.8

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch A P C T H Lbs

8-069-13 12,000 5.3 1/2 0.55 5.55 2.24 2.56 4.92 4.0

Item No. DSC.Working

Load Limit Dimensions (inch) N.W.Lbs* tonnes* K E F T G H Lbs

8-067-STR Straight 28,000 12.5 7.56 2.76 1.81 0.98 2.95 1.89 8.68-067-45LT Left 45ª 28,000 12.5 7.56 2.76 1.81 0.98 2.95 1.89 8.68-067-45RH Right 45ª 28,000 12.5 7.56 2.76 1.81 0.98 2.95 1.89 8.6

105


www.yokeusa.com

A

DB

K

H

T

P

T

H

C

A

KP

L

W

D

E

S

H

P

A


Grade 80 Fittings

Container Hook. Code "KL"

Shackle Eye Swivel Hook, with brass bushing. Code "YSWX"

Sliding Choke Hook. Code "KF"



★ Design factor 5 : 1

WARNING INFORMATION:This hook is a positioning device and is not intended to rotate under load.

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch A K H P I D L W Lbs

8-073-16 18,100 8.0 5/8 1.93 7.44 1.97 2.28 1.61 1.26 10.31 1.73 8.2

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch A K H P I D W Lbs

8-048-16 18,100 8.0 5/8 10.03 1.97 1.10 1.10 1.10 1.38 1.73 13.0

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch A E P S H Lbs

8-074-09/13 3,300 1.5 3/8 0.63 3.43 0.71 0.71 0.94 1.38-074-09/16 4,850 2.2 9/16 0.83 3.86 0.79 0.87 1.14 2.0

106


A

K

K

C

T

P

K

W

E

W

K


Grade 80 Fittings

Twist Eye Choke Hook. Code "KE"

Rapid Double End Choker. Code "KS"

Barrel Hook. Code "KK"




Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K C A Lbs

8-063-07 4,500 2.0 1/4~5/16 3.74 0.75 1.28 0.98-063-10 7,100 3.15 3/8 4.57 0.83 1.61 1.88-063-13 12,000 5.3 1/2 5.91 1.06 1.97 4.48-063-16 18,100 8.0 5/8 7.28 1.26 2.64 6.8

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch E K W Lbs

8-071-07 3,500 1.6 1/4 1.50 5.24 1.97 2.0

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P W T Lbs

8-076-0.5 1,100 0.5 5/16 2.83 0.75 0.71 0.47 0.98-076-01 2,200 1.0 1/2 2.83 0.75 0.71 0.79 1.18-076-02 4,400 2.0 5/8 3.50 0.75 1.02 1.10 2.48-076-04 8,800 4.0 3/4 4.29 0.98 1.34 1.26 4.2

107


www.yokeusa.com

D

L

KM

T

P

H


Grade 80 Fittings

Shank Sling Hook. Code "FH"

Tractor Hook. Code "FG"

**d min.: the smallest shank dimension after machining.Note: After machining the shank proof loading must be carried out.★ Design factor 4:1


Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P D T H L d min*** M Lbs

8-045-10 7,100 3.15 3/8 8.31 1.65 1.38 1.26 1.69 1.81 M20 5.51 3.5

Item No.Working

Load Limit Dimensions (inch) N.W.Lbs* tonnes* K P B A T L Lbs

8-092-38 18,700 8.5 7.2 1.18 1.69 1.26 1.65 10.43 12.48-092-48 24,200 11 8.4 1.30 1.69 1.26 1.81 11.81 15.4

108


A

BOL

C

W

OL

W

D

C

B

E

F

P

G

A

K

H

T

D


Grade 80 Fittings

Eye Swivels.

Quick Connector. Code "EM"

Quick Hook. Code "FA"




WARNING INFORMATION:This hook is a positioning device and is not intended to rotate under load.

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch A B C W OL Lbs

8-080-06 2,100 1.12 7/32 0.86 4.72 1.26 2.17 5.63 1.38-080-07 4,500 2.0 1/4~5/16 1.14 5.51 1.42 2.36 6.50 2.28-080-10 7,100 3.15 3/8 1.34 6.54 1.63 2.87 7.80 3.18-080-13 12,000 5.3 1/2 1.70 8.35 1.81 3.46 10.00 6.68-080-16 18,100 8.0 5/8 1.97 9.84 2.35 4.21 11.65 10.18-080-20 28,300 12.5 3/4 3.23 13.26 2.91 5.00 15.20 16.88-080-22 34,200 15.0 7/8 3.74 16.22 3.82 6.61 18.52 40.18-080-26 47,700 21.2 1 4.53 20.43 4.13 8.31 23.70 80.3

Item No.Working

Load Limit Dimensions (inch) N.W.Lbs* tonnes* OL B C D E F W Lbs

8-089-10 6,600 3.0 4.53 3.15 1.61 1.18 0.1 0.98 2.76 1.58-089-13 11,000 5.0 5.35 3.74 1.88 1.42 0.1 1.18 3.15 2.68-089-16 17,600 8.0 6.10 4.25 1.97 1.65 0.1 1.41 3.78 4.4

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch P G D A T H K Lbs

8-093-10 7,100 3.15 3/8 0.47 0.79 0.59 1.26 0.83 0.91 3.00 0.98-093-13 12,000 5.3 1/2 0.55 1.10 0.71 1.50 0.98 1.10 3.66 2.08-093-16 18,100 8.0 5/8 0.67 1.26 0.87 1.97 1.26 1.34 4.65 3.88-093-19 25,500 11.5 3/4 0.83 1.50 1.02 2.32 1.42 1.73 5.67 7.3

109


www.yokeusa.com


AD

K

W

B

D

A

K

H

T

P


Grade 80 Fittings

How to use YOKE Web Sling Connector?

Web Sling Connector.

Eye Self Locking Webbing Hook. Code "FT"



Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch A B D K W Lbs

8-016-06 2,100 1.12 7/32 0.59 0.67 0.28 2.16 1.54 0.48-016-07 4,500 2.0 1/4~5/16 0.71 0.89 0.35 2.44 1.57 0.78-016-10 7,100 3.15 3/8 0.99 1.06 0.50 3.07 1.85 1.38-016-13 12,000 5.3 1/2 1.19 1.38 0.62 3.74 2.09 2.48-016-16 18,100 8.0 5/8 1.42 1.51 0.75 4.53 2.64 4.48-016-20 28,300 12.5 3/4 1.65 1.81 0.87 5.20 3.15 7.18-016-22 34,200 15.0 7/8 1.93 2.32 0.94 7.36 4.92 16.38-016-26 47,700 21.2 1 2.17 2.44 1.19 8.23 5.91 25.38-016-32 72,300 31.5 1-1/4 2.72 3.11 1.42 10.98 7.48 40.6

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P A D T F Lbs

8-029-10 7,100 3.15 3/8 6.69 1.50 1.26 0.51 1.26 1.65 5.5

111

K

T

H

W

P

AD

B

K

H

T

W

P

K

A

D


Copyright © 2012YOKE Industrial Corp.

All Rights Reserved.

Grade 80 Fittings

Flat Webbing Choker. Code "FN"

Flat Webbing Choker. Code "FM"

Bolt Anchor. Code "DC"

Patent■No. : Germany 40144213.8 Taiwan 90301916



★ Design factor 5:1

Item No.Working

Load Limit Dimensions (inch) N.W.Lbs* tonnes* K P W T H Lbs

8-030-01 2,200 1 3.11 1.02 1.73 0.83 1.02 1.88-030-02 4,400 2 3.43 1.34 2.80 0.98 1.38 3.58-030-03 6,600 3 3.78 1.46 4.02 1.14 1.50 5.38-030-05 11,000 5 6.10 1.77 673 1.57 1.97 17.2

Item No.Working

Load Limit Dimensions (inch) N.W.Lbs* tonnes* K P B A D W T H Lbs

8-031-02 4,400 2.0 5.51 1.73 0.94 3.19 0.55 3.15 1.57 1.73 4.6

Item No.Working

Load Limit Dimensions (inch) N.W.Lbs* tonnes* K A D Lbs

8-036-05 5,500 2.5 2.32 2.17 0.55 1.58-036-06 7,050 3.2 2.95 2.56 0.55 1.58-036-07 9,260 4.2 3.35 3.15 0.63 2.78-036-10 9,260 4.2 4.29 4.13 0.63 3.18-036-12 14,100 6.4 5.31 5.20 0.79 4.98-036-15 14,100 6.4 6.77 6.30 0.79 7.1


www.yokeusa.com


W

K

H

T

P


Grade 80 Fittings

Round Sling Self Locking Hook.


YOKE Roundsling Self Locking Hook is designed in a way to solve your synthetic end-fitting problems. The Roundsling Self Locking Hook presents following utmost benefits :1. The Round Shape is designed to provide great protection to your synthetic roundsling on everyloading.2. Offer complete range of hooks from 1 tonnes up to 21.2 tonnes.3. Assembly is fast and easy with only a hammer required.4. The hook with Self■Locking■function meets real

safe and safer required.5. Acquired certificate approved by BG German

company.6. Patent : Taiwan, China, France, Germany, Italy,

Japan, USA, UK, Switzerland, and Sweden.

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P W T H Lbs

8-028-06 2,100 1.12 7/32 5.43 1.14 1.54 0.59 0.75 1.38-028-07 4,500 2.0 1/4~5/16 6.65 1.34 1.57 0.79 0.94 2.48-028-10 7,100 3.15 3/8 7.72 1.77 1.85 1.02 1.19 4.08-028-13 12,000 5.3 1/2 9.96 2.13 2.09 1.19 1.57 7.98-028-16 18,100 8.0 5/8 12.00 2.44 2.64 1.42 1.93 15.28-028-20 28,300 12.5 3/4 12.91 3.54 3.15 1.91 2.36 23.68-028-22 34,200 15.0 7/8 16.38 3.14 4.92 2.12 2.48 39.08-028-26 47,700 21.2 1 18.07 3.90 5.91 2.20 2.72 53.1

113

D

H

KP

T

B

W

D

H

KP

T

B

W

H

T

PK

D

B

w

H

T

PK

D

B

w

T

H

w

K

D

B

P




Grade 80 Fittings

Shackle Swivel Self Hook, with brass bushing. Code "EH"

Shackle Swivel Self Hook, with ball bearing. Code " EHN "Ball bearing performs to fully under load

Shackle Swivel Hook, with brass bushing. Code " EHY "

Shackle Swivel Hook, with ball bearing. Code " EHYN "Ball bearing performs to fully swivel under load.







Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W. Lbs* tonnes* inch B D K P T H W Lbs

8-020-07 4,500 2.0 9/16~5/8 1.77 0.75 8.03 1.34 0.79 0.94 0.83 3.18-020-10 7,100 3.15 3/4 2.36 0.79 9.57 1.77 1.02 1.19 1.06 6.08-020-13 12,000 5.3 7/8~1 2.95 0.87 12.09 2.13 1.19 1.57 1.34 11.5

Item No.Working

Load Limit

ForGrade 80


8-021-07 4,500 2.0 9/16~5/8 1.77 0.75 6.77 1.02 0.71 0.87 0.83 2.48-021-10 7,100 3.15 3/4 2.36 0.79 8.43 1.42 0.91 1.14 1.06 5.18-021-13 12,000 5.3 7/8~1 2.95 0.87 10.43 1.65 1.10 1.38 1.34 9.5

Item No.Working

Load Limit

ForGrade 80


8-021N-07 4,500 2.0 9/16~5/8 1.77 0.75 6.77 1.02 0.71 0.87 0.83 2.48-021N-10 7,100 3.15 3/4 2.36 0.79 8.43 1.42 0.91 1.14 1.06 5.18-021N-13 12,000 5.3 7/8~1 2.95 0.87 10.43 1.65 1.10 1.38 1.34 9.7

Item No.Working

Load Limit

ForGrade 80


8-020N-07 4,500 2.0 9/16~5/8 1.77 0.75 8.03 1.34 0.79 0.94 0.83 3.18-020N-10 7,100 3.15 3/4 2.36 0.79 9.57 1.77 1.02 1.19 1.06 6.28-020N-13 12,000 5.3 7/8~1 2.95 0.87 12.09 2.13 1.19 1.57 1.34 11.7


www.yokeusa.com

1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444www.yokeusa.com NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

WARNING

Grade 80 Fittings

YOKE "BSI" Insulated Swivels and Fittings

● The perfect system for universal coupling of components to chain, wire rope and synthetic slings.

● Heavy hoisting with a strong but lightweight system. All components are forged high alloy steel compatible with forged chain and fittings.

● Assembly is fast and easy with only a hammer required.

● Individual swivels & components are 100% proof load tested to a minimum of 2.5 times the working load limit.

● All "BSI" Swivels are individually tested during manufacturing to assure insulating properties. A insulated test certif icate is packaged with each unit shipped.

● YOKE "BSI" Insulated Swivels are designed with ball bearing which performs to fully swivel under Load.

● Acquired certificate approved by BG German company.

115


www.yokeusa.com

K

H

T


Grade 80 Fittings

Coupling Self Locking Hook. Code "YL"

YOKE's innovative, fine design with " Coupling Pin " system hook is able to solve any of your problems in Chain, Wire Rope and Synthetic Slings. The hook :1. Create safer lifting with the use of " Self Locking " system.2. Assembly is fast and easy with only a hammer required.3. Acquired certificate approved by BG German company.4. Patent :Taiwan, China, France, Germany, Italy, Japan,USA, UK,

Switzerland, and Sweden.


Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P T H Lbs

8-023-06 2,100 1.12 7/32 4.12 1.14 0.59 0.75 1.18-023-07 4,500 2.0 1/4~5/16 5.35 1.34 0.79 0.94 1.88-023-10 7,100 3.15 3/8 6.06 1.77 1.02 1.19 3.18-023-13 12,000 5.3 1/2 7.95 2.13 1.19 1.57 6.48-023-16 18,100 8.0 5/8 9.53 2.44 1.42 1.93 11.98-023-20 28,300 12.5 3/4 10.12 3.54 1.91 2.36 17.98-023-22 34,200 15.0 7/8 11.97 3.15 2.12 2.48 24.78-023-26 47,700 21.2 1 12.95 3.90 2.20 2.72 32.2

116

WT

H

K

A

L

D

WT

H

LK



Grade 80 Fittings

Insulated Blank Swivels. with ball bearing, Code " BSI "Individually tested to resist 1500 Volts insulated with Test Certifi cate.Design for protection of overhead crane during welding operations on suspended loads.

Coupling Master Link. Code "EC"

Closed Coupling Master Link. Code "ECO"




Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch D L Lbs

8-088-07 4,500 2.0 1/4~5/16 1.97 2.95 1.18-088-10 7,100 3.15 3/8 2.44 3.70 2.48-088-13 12,000 5.3 1/2 3.03 4.84 5.18-088-16 18,100 8.0 5/8 3.70 5.63 9.38-088-20 28,300 12.5 3/4 4.29 6.46 14.1

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K W T H A Lbs

8-051-07 4,500 2.0 1/4~5/16 3.94 1.97 0.59 0.59 0.59 0.78-051-10 7,100 3.15 3/8 5.00 2.56 0.75 0.75 0.79 1.58-051-13 12,000 5.3 1/2 5.71 2.83 0.93 0.87 0.98 2.28-051-16 18,100 8.0 5/8 6.85 3.15 0.98 1.02 1.18 3.58-051-20 28,300 12.5 3/4 7.95 4.09 1.22 1.42 1.42 6.6

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K W T H L Lbs

8-052-07 4,500 2.0 1/4~5/16 3.94 1.97 0.59 0.59 3.07 0.78-052-10 7,100 3.15 3/8 5.00 2.56 0.75 0.75 3.98 1.58-052-13 12,000 5.3 1/2 5.71 2.83 0.91 0.87 4.45 2.48-052-16 18,100 8.0 5/8 6.85 3.15 0.98 1.02 5.39 3.88-052-20 28,300 12.5 3/4 7.95 4.09 1.22 1.42 6.50 6.6


K

H

T

P

L1

D

L2

W

PP




Grade 80 Fittings

Shank Coupling. Code "EA"

Coupling Sling Hook. Code "EB"

Round Sling Coupling. Code "YW"

** d min.: the smallest shank dimension after machining. Note: After machining the shank, proof loading must be carried out.



Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch D d min.** L1 L2 Lbs

8-050-07 4,500 2.0 1/4~5/16 1.18 0.51 2.72 0.91 1.18-050-10 7,100 3.15 3/8 1.38 0.63 2.76 1.26 1.58-050-13 12,000 5.3 1/2 1.65 0.78 4.13 1.54 3.58-050-16 18,100 8.0 5/8 1.97 0.98 4.72 1.81 5.78-050-20 28,300 12.5 3/4 2.95 1.18 3.54 2.32 12.4

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P T H Lbs

8-055-07 4,500 2.0 1/4~5/16 3.66 1.18 0.75 0.91 0.98-055-10 7,100 3.15 3/8 4.53 1.42 0.91 1.22 2.08-055-13 12,000 5.3 1/2 5.55 1.65 1.10 1.42 4.08-055-16 18,100 8.0 5/8 6.54 1.85 1.26 1.77 6.68-055-20 28,300 12.5 3/4 7.52 2.05 1.69 1.89 10.4

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K W A B Lbs

8-053-06 2,100 1.12 7/32 1.30 1.54 0.59 0.87 0.48-053-07 4,500 2.0 1/4~5/16 1.30 1.57 0.71 0.94 0.48-053-10 7,100 3.15 3/8 1.65 1.85 0.98 1.14 0.98-053-13 12,000 5.3 1/2 2.01 2.09 1.18 1.38 1.58-053-16 18,100 8.0 5/8 2.48 2.64 1.42 1.73 2.98-053-20 28,300 12.5 3/4 2.87 3.15 1.65 2.05 4.68-053-22 34,200 15.0 7/8 4.37 4.92 1.97 2.83 12.68-053-26 47,700 21.2 1 5.08 5.91 2.17 3.39 20.18-053-32 72,300 31.5 1-1/4 6.50 7.48 2.72 3.35 29.5


www.yokeusa.com

D

K L

A



Grade 80 Fittings

Half Coupling Link, with Coupling Pin and Sleeve Locking. Code "BST"


Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K A D L Lbs

8-054-06 2,100 1.12 7/32 0.67 0.59 0.28 0.87 0.28-054-07 4,500 2.0 1/4~5/16 0.89 0.71 0.35 1.10 0.28-054-10 7,100 3.15 3/8 1.06 0.98 0.50 1.30 0.48-054-13 12,000 5.3 1/2 1.38 1.18 0.62 1.77 0.98-054-16 18,100 8.0 5/8 1.51 1.42 0.75 1.97 1.38-054-20 28,300 12.5 3/4 1.81 1.65 0.87 2.36 2.48-054-22 34,200 15.0 7/8 2.32 1.93 0.94 3.00 3.88-054-26 47,700 21.2 1 2.44 2.19 1.19 3.20 6.08-054-32 72,300 31.5 1-1/4 3.11 2.72 1.42 4.00 11.0



www.yokeusa.com

D

L1

L

H

T

L1

D

L

HT

AD

L

H

T


Grade 80 Fittings

Insulated Swivels, with Shank & Coupling Sling Hook.

Insulated Swivels, with Shank & Coupling Self Locking Hook.

Insulated Swivels, with Half Link & Coupling Self Locking Hook.

★ Design factor 4:1 proof tested and certified


★ Design factor 4:1 proof tested and certified Tested acc. to EN 1677-1

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K T H D L1 Lbs

8-132-07 4,500 2.0 1/4~5/16 10.47 0.75 0.91 1.18 2.72 4.08-132-10 7,100 3.15 3/8 12.20 0.91 1.22 1.38 2.76 6.48-132-13 12,000 5.3 1/2 16.10 1.10 1.42 1.65 4.13 12.88-132-16 18,100 8.0 5/8 18.66 1.26 1.77 1.97 4.72 22.78-132-20 28,300 12.5 3/4 19.76 1.69 1.89 2.95 3.54 37.7

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch L T H D L1 Lbs

8-121-07 4,500 2.0 1/4~5/16 12.20 0.79 0.94 1.16 2.72 5.18-121-10 7,100 3.15 3/8 13.78 1.02 1.19 1.38 2.76 7.38-121-13 12,000 5.3 1/2 18.50 1.19 1.57 1.65 4.13 15.48-121-16 18,100 8.0 5/8 21.69 1.42 1.93 1.97 4.72 29.18-121-20 28,300 12.5 3/4 22.36 1.91 2.44 2.95 3.54 46.3

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch L T H A D Lbs

8-122-07 4,500 2.0 1/4~5/16 9.41 0.79 0.94 0.71 0.35 4.28-122-10 7,100 3.15 3/8 11.10 1.02 1.19 0.99 0.50 6.28-122-13 12,000 5.3 1/2 14.61 1.19 1.57 1.19 0.62 13.78-122-16 18,100 8.0 5/8 17.13 1.42 1.93 1.42 0.75 24.98-122-20 28,300 12.5 3/4 18.98 1.91 2.44 1.65 0.87 37.9

120


L

AD

L

W

HT

t

Wt

L

H

T


Grade 80 Fittings

Insulated Swivels, with 2 Half Links.

Insulated Swivels, with Open Master Link & Coupling Self Locking Hook.

Insulated Swivels, with Open Master Link & Sling Hook.




Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch L T H W t Lbs

8-125-07 4,500 2.0 1/4~5/16 10.51 0.75 0.91 1.97 0.59 3.58-125-10 7,100 3.15 3/8 13.19 0.91 1.22 2.56 0.75 6.28-125-13 12,000 5.3 1/2 16.14 1.10 1.42 2.83 0.91 11.98-125-16 18,100 8.0 5/8 19.06 1.26 1.77 3.15 0.98 20.38-125-20 28,300 12.5 3/4 21.97 1.69 1.89 4.09 1.22 33.1

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch L T H W t Lbs

8-124-07 4,500 2.0 1/4~5/16 12.20 0.79 0.94 1.97 0.59 4.68-124-10 7,100 3.15 3/8 14.72 1.02 1.19 2.56 0.75 7.38-124-13 12,000 5.3 1/2 18.54 1.19 1.57 2.83 0.91 14.68-124-16 18,100 8.0 5/8 22.05 1.42 1.93 3.15 0.98 25.68-124-20 28,300 12.5 3/4 24.57 1.91 2.44 4.09 1.22 41.7

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch L A D Lbs

8-123-07 4,500 2.0 1/4~5/16 5.16 0.71 0.35 1.58-123-10 7,100 3.15 3/8 6.38 0.99 0.50 3.38-123-13 12,000 5.3 1/2 8.43 1.19 0.62 7.38-123-16 18,100 8.0 5/8 9.57 1.42 0.75 12.88-123-20 28,300 12.5 3/4 11.22 1.65 0.87 20.3

121

wt

L

DA

W

D

P K

D

K

H

WT




Grade 80 Fittings

Insulated Swivels, with Open Master Link & Half Link.

Insulated Swivels, with Half Link & Web Sling Connector.

Open Master Link with Half Link.




Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch L A D W t Lbs

8-126-07 4,500 2.0 1/4~5/16 7.95 0.71 0.35 1.97 0.59 2.98-126-10 7,100 3.15 3/8 10.04 0.98 0.50 2.56 0.75 4.48-126-13 12,000 5.3 1/2 12.32 1.18 0.62 2.83 0.91 9.08-126-16 18,100 8.0 5/8 14.49 1.42 0.75 3.15 0.98 15.28-126-20 28,300 12.5 3/4 16.81 1.65 0.87 4.09 1.22 24.5

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K W T H D Lbs

8-128-07 4,500 2.0 1/4~5/16 4.76 1.97 0.59 0.59 0.35 0.98-128-10 7,100 3.15 3/8 5.87 2.56 0.75 0.75 0.50 1.88-128-13 12,000 5.3 1/2 7.36 2.83 0.91 0.87 0.62 3.38-128-16 18,100 8.0 5/8 8.50 3.15 0.98 1.02 0.75 5.38-128-20 28,300 12.5 3/4 9.92 4.09 1.22 1.42 0.87 8.6

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch D K P W Lbs

8-130-07 4,500 2.0 1/4~5/16 0.35 5.35 2.99 1.57 1.88-130-10 7,100 3.15 3/8 0.50 6.69 3.70 1.85 4.08-130-13 12,000 5.3 1/2 0.62 8.62 4.84 2.09 7.98-130-16 18,100 8.0 5/8 0.75 10.08 5.59 2.64 14.38-130-20 28,300 12.5 3/4 0.87 11.61 6.46 3.15 22.3


www.yokeusa.com

WT

H

K

D

D

K

H

T

P

W

t

K

H

T

P



Grade 80 Fittings

Closed Master Link with Half Link.

Sling Hook with Half Link.

Coupling Self Locking Hook with Open Master Link.




Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K W T H D Lbs

8-129-07 4,500 2.0 1/4~5/16 4.76 1.97 0.59 0.59 0.35 0.98-129-10 7,100 3.15 3/8 5.86 2.56 0.75 0.75 0.50 2.08-129-13 12,000 5.3 1/2 7.36 2.83 0.91 0.87 0.62 3.38-129-16 18,100 8.0 5/8 8.50 3.15 0.98 1.02 0.75 5.38-129-20 28,300 12.5 3/4 9.92 4.09 1.22 1.42 0.87 8.6

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P T H D Lbs

8-131-07 4,500 2.0 1/4~5/16 4.84 1.18 0.75 0.91 0.35 1.38-131-10 7,100 3.15 3/8 5.87 1.42 0.91 1.22 0.50 2.48-131-13 12,000 5.3 1/2 7.36 1.65 1.10 1.42 0.62 4.98-131-16 18,100 8.0 5/8 8.50 1.85 1.26 1.77 0.75 9.98-131-20 28,300 12.5 3/4 9.92 2.05 1.69 1.89 0.87 15.7

Item No.Working

Load Limit

ForGrade 80

Chain Dimensions (inch) N.W.Lbs* tonnes* inch K T H W t Lbs

8-127-07 4,500 2.0 1/4~5/16 8.98 0.79 0.94 1.97 0.59 2.78-127-10 7,100 3.15 3/8 10.55 1.02 1.19 2.56 0.75 4.68-127-13 12,000 5.3 1/2 13.50 1.19 1.57 2.83 0.91 8.68-127-16 18,100 8.0 5/8 16.06 1.42 1.93 3.15 0.98 16.58-127-20 28,300 12.5 3/4 17.64 1.91 2.44 4.09 1.22 25.6





Grade 80 Fittings

124

A

Tap Size

K

H

D

W

J

B

A B D H J K W8-9400-05 No.10 — 32UNF 5 11 8 14 5 26 9 0.018-9400-06 1/ 4 — 28UNF 7 16 11 19 6 32 12 0.038-9400-08 5/16 — 24UNF 9 19 13 21 8 37 15 0.058-9400-10 3/ 8 — 24UNF 11 22 16 22 10 41 18 0.088-9400-11 7/16 — 20UNF 13 26 18 25 11 48 21 0.128-9400-13 1/ 2 — 20UNF 14 29 21 28 13 48 24 0.168-9400-16 5/ 8 — 18UNF 17 35 27 31 16 95 30 0.39

A B D H J K W8-9400-05 No.10 — 32UNF 0.20 0.45 0.32 0.57 0.19 1.03 0.37 0.028-9400-06 1/ 4 — 28UNF 0.29 0.63 0.42 0.75 0.25 1.25 0.19 0.078-9400-08 5/16 — 24UNF 0.35 0.76 0.50 0.81 0.31 1.44 0.60 0.118-9400-10 3/ 8 — 24UNF 0.44 0.88 0.63 0.87 0.37 1.63 0.69 0.188-9400-11 7/16 — 20UNF 0.50 1.01 0.72 0.99 0.44 1.89 .081 0.268-9400-13 1/ 2 — 20UNF 0.56 1.13 0.81 1.11 0.50 1.89 0.94 0.358-9400-16 5/ 8 — 18UNF 0.69 1.38 1.06 1.20 0.63 3.73 1.19 0.86

Yoke End (clevis end),Threaded

● Forged, low carbon steel.

● Adjustable yoke wnds (also) called "clevis ends") are typically assembled to the end of a rod, pope, tube or cable linkage and are then attached via a clevis pin to a mounting point.

ITEM No. Tap Size Dimensions (inch) N.W.Lbs

ITEM No. Tap Size Dimensions (mm) N.W.Kg


www.yokeusa.com

Documents

Grade 80 Fittings - Yoke Lifting Products and US Rigging ... · PDF file1600 East McFadden Ave. Santa Ana, CA 92705. Toll Free: 1-888-260-7444 • Local: 714-545-7444 . A B K T A H