Upload
cuyas1
View
92
Download
3
Embed Size (px)
Citation preview
Pump Selection Guide
2
Pump Selection GuideGoulds Pumps presents this Pump Selection Guide to assist usersin making an easy initial selection of the best pump for a particularservice. To do this, simply refer to the selection chart on page 3where the full line of Goulds pumps are listed by pump type.
For more details about your selection, refer to the page indicated.
Contact your nearest Goulds, sales office or representative for acomplete data package on any pump(s) in which you are interested.They will also furnish you with any information you require to assureproper pump selection for optimum reliability and performance.
Goulds Pumps...Serving The World’s IndustriesChemicalThe family of chemical process pumps includes both ANSI and ISO models. Goulds specializes in high alloys for ourchemical pumps ranging from 316SS to Zirconium and evenspecial alloys if needed. Unique non-metallic pumps offerdistinct advantages when handling severe corrosives.
Magnetic drive pumps are designed for services where leakage cannot be tolerated. Our complete understanding of chemical processing and related industries gives us aclear advantage in finding solutions to these particularpumping problems.
Pulp and PaperGoulds leadership in the pulp and paper industry has beenlargely due to the success of our comprehensive range ofpumps that stand up to the harsh operating requirements ofthis industry. The Model 3175 has been prized forperformance since its introduction in 1968. Goulds latest
3180/3185 paper stock/process pump line extends theoffering farther for users with a preference for a metric pump.Other superior pumps include the 3500XD enhancedperformance medium consistency stock pump and acomplete line of double suction and LoPulse fan pumps.
Mining And MineralsGoulds dominance in the mining industry dates back to thelatter 1800s. Designed for the most severe applications, ourpumps can be found in coal, aluminum, copper, iron, clay,phosphate, potash, soda ash, salt, gold and aggregateindustries throughout the world.
Goulds offers the widest range of rubber-lined and metalcorrosion / abrasion-resistant slurry pumps in the industry,including vertical, horizontal and submersible designs forcyclone feed, tailings disposal, minerals processing, minedewatering, clarifier underflow, oil sands and sump services.
Power GenerationGoulds offers a wide variety of pumps designed specificallyfor uses within this industry. The Model 3600, the mostmodern axially split multi-stage pump in the world, is ideallysuited for boiler feed service. The 3310H segmented multi-stage pump is proven in over 1200 installations worldwide.
Vertical turbine and double suction pumps can handle themost demanding condensate or circulating water needs.Sumps can be cleared with Goulds line of vertical orsubmersible sump pumps. Heavy duty slurry pumps likethe SRL and 5500 are specially designed for Flue GasScrubbers and ash handling services.
Oil Refining and Gas ProcessingGoulds offers a full range of API-610 pumps to meet yourdemanding applications: BB2 Between Bearing radially splitpumps, BB3 Multi-Stage axially split pumps, and OverhungOH2/OH3 process pumps.
Vertical turbine pumps are available in any configurationincluding can pumps for low NPSH, fire pumps andsubmersibles. Design and manufacturing capabilitiesinclude standard commercial grades, ASME Section VIII,and API-610 for total line capability.
Primary MetalsThe wide range of products makes Goulds the ideal choicefor the demanding services of this industry. Vertical andsubmersible abrasives handling, slurry pumps for scalepits, chemical pumps for pickle liquor and leachingsolutions,
vertical turbines and double suction pumps for coolingtower and dewatering applications. Also, pumps for wasteacid, scrubber service, and quench.
Water and WastewaterGoulds offers the most comprehensive line of double suction,end suction, multi-stage, non-clog and vertical turbine pumpsfor chemical feed, water supply, booster, low lift, and high lift.
For non-clog solids handling, a range of horizontal, verticalsump and submersible pumps have helped professionalengineers solve pollution problems around the world.
Food And BeverageAdhering to strict process requirements is only one of thereasons for Goulds entry into the forefront of these industries.Goulds pumps handle a wide variety of grain processing,water, wastes, biofuels, corrosives, and erosives.
Ethanol breweries, bottling companies, canneries and amultitude of food and liquid industries rely on Goulds forsuccessful operations.
Goulds makes the widest range of pumps in the industry — pumps to handle virtually any service.This selection chart is designed to help you find and specify the best pump for your service.Pump Selection Chart
PumpCategory
ControlMonitoring
Services
Paper Stock/Process
GouldsModel
Pump TypeCorrosive Abrasive
Solids
Non-Abrasive
Fibrous/Stringy
Referto
Page
Nature of PumpageHigh
Temp-erature
Chem
ical
Pulp
& Pa
per
Min
ing
&M
iner
als
Pow
erGe
nera
tion
Oil R
e!ni
ng &
Gas P
roce
ssin
g
Prim
ary M
etals
Wat
er &
Was
tew
ater
Food
&Be
vera
ge
Process Pumping System
Rotating Equipment ServicesPredictive Monitoring
Paper Stock/ProcessPaper Stock/ProcessHigh Temperature
555
3175PRO Services
ProSmartPumpSmart
3181/31863180/3185
500°F (260°)and Greater
444
Axial FlowAFHeavy-Duty Paper Stock 53500XD
ChemicalProcess
Vertical Sump & ProcessNon-Clog Vertical Sump ProcessFRP Vert. Sump/ProcessANSI Chemical ProcessLow Flow ANSI ProcessANSI High-Temperature Process
5556666667777777888888
Non-Clog ProcessSelf-Priming ProcessANSI In-Line ProcessANSI Metallic Sealless ProcessANSI FRP ProcessANSI Tefzel® Lined SeallessANSI Tefzel® Lined SeallessANSI PFA Te!on® Lined Process
ANSI PFA Te!on® Lined SeallessISO Chemical Process
High-Temperature ISO Process
ISO Vertical Column, Wet PitISO Metallic Magnetic Drive
High-Temperature ISO Magnetic Drive
Close-Coupled ISO Process
Tefzel® Lined Sealless
CV31713171
NM31713196
LF3196
CV31963796
HT3196
39963296 EZMAG
NM31963298
SP32983198
V32983299
ICICBICPICMICV
ICMP
APIProcess
999
Industrial Duty Vertical SumpAPI-610 Process
API 31713700/3710
3910
99
API-610 In-Line
High Temp. Two-StageHigh Temp. Double Suction
3640
Trash Hog
3620
Heavy-Duty Multi-Stage3600 910
93610 Single Stage, Double Suction
Sump/Abrasives/
SolidsHandling
Solids Handling, Self-Priming
Vertical Cantilever
Submersible
VHSVJCHSU
HSULJCUVRS Abrasive Slurry R. L. Cantilever
1010
101010
Axial FlowAF 12
Axial FlowAF
Abrasives Slurry/Solids
Handling
Medium-Duty Abrasive SlurryRubber-Lined Abrasive SlurryRubber-Lined Abrasive Slurry
JCSRL
Rubber-Lined Abrasive SlurrySRL-SSRL-C
Rubber-Lined Abrasive Slurry
Abrasive Slurry R. L. CantileverNon-Clog Solids HandlingSevere Duty Abrasive Slurry
SRL-XT5500HS
VRS
1111111111111111
High-Pressure Multi-Stage3311 12
12
12
Multi-Stage /Axial Flow /
DoubleSuction
Wastewater
Single Stage, Double SuctionMulti-Stage
Di"user-Type Multi-Stage
Two-Stage
Non-Clog, Soft Solids-Handling
NSWNSX
Heavy-Duty Multi-Stage3600
33353935
3400 Series33553316
NSYWSY/SSE/SSF
1213131314141414
1212
VerticalTurbine
Wet Pit Pumps
Vertical SubmersibleVertical Marine
Vertical Industrial TurbineVertical Turbine/Can Type
WCAXYDDWCAWCB
WMCCWMCE
VICVITVIS
VMP
14141414141415151515
Trash Hog 10
High-Pressure Multi-Stage3393 13
11
Solids Handling, Self-Priming
Ideally Suited for Service Indicated* TEFZEL® and TEFLON® are registered trademarks for fluoropolymer resins, films and fibers made by DuPont.
3
PRO Services®
ExtendingEquipment Life...
Product Repair (all types and brands of rotating equipment)
• Service Center Repair
• Turnkey Repair/Installation
• Field Service
• Emergency Service
Reliability Improvement• Predictive Condition Monitoring
• Root Cause Failure Analysis
• Machine & System Assessment
• Engineered Upgrades
O ptimization of Assets• Inventory Management
• Replacement/Exchange
• Training
• Maintenance Management
• Technical Expertise
• Factory Trained
Service Personnel
• Quality
• Fast Turnaround
• Emergency Service –
24 hours/day, 7 days/week
• ISO and Safety Certified
ProSmart™ encompasses the latesttechnology* in condition monitoring totransform your Predictive Maintenanceprogram into a Plant Profitabilityprogram. It provides a cost-effective
solution to maintaining uptime on all of
your rotating equipment. ProSmart
continuously monitors, analyzes and annunciates an alarm
when critical criteria is not met. By identifying, diagnosing, and
sounding an alert to potential equipment problems before they
have a chance to manifest into unexpected downtime or
catastrophic failure, ProSmart helps to assure plant profitability.
ProSmart delivers benefits thatgo right to the bottom line.
• Extends equipment life
• Optimizes costly “walk
arounds” by skilled personnel
• Can help reduce overall equipment failures and the cost
of downtime
• Sends alerts prior to potential catastrophic process failures
• Automatically alerts personnel to machine problems
• Consolidates data for equipment optimization
(*Patent pending)
ProSmart is a wireless machinery monitoring system that
collects and analyzes operating data automatically every 5
seconds. Integrated analysis capabilities provide enhanced
data and reporting functions.
PumpSmart® is the latest advancement in pump control and protectionto reduce energy consumption, increase uptime and decreasemaintenance cost. It allows the pump to be right-sized to the application by
dialing in the speed and torque which increases flow economy, reduces heat
and vibration and improves overall system reliability.
• Simplified Pump Control — PumpSmart was designed specifically to
optimize pumping applications and can be used to control a single
pump or coordinate between multiple pumps with out the need for an
external controller.
• Pump Protection — PumpSmart guarantees to protect the pump from
upset conditions with patented sensorless pump protection algorithms.
• Smart Flow — PumpSmart features a sensorless flow function for
centrifugal pumps that can calculate the flow of the pump with in ±5%
of the pump rated flow.
• Drive for the DCS — While most VFDs can only provide basic
information PumpSmart offers unparalleled insight to the pump
operation which allows for smoother process control and efficiency.
• Pump Experts — PumpSmart is a variable speed drive with pump
specific algorithms imbedded into the drive. With over 150 years of
pump knowledge let the pump experts take responsibility of your
pump system.
PUMPSMART
4
Model 3175
Model 3500XD
Model 3180/3185
Model 3181/3186
Paper Stock/Process
For the toughest services. Thousands of installations handle stock,solids, fibrous/stringy materials, abrasive slurries, and corrosives.Patented dynamic seal option eliminates mechanical seal problems.Features i-ALERT™ condition monitoring as-standard.
lCapacities to 28,000 GPM (6360 m3/h)
lHeads to 350 feet (107 m)
lTemperatures to 450°F (232° C)
lPressures to 285 PSIG (20 bar)
Materials: All Iron/316SS Trim, 316SS, 317SS, CD4MCuN
Paper Stock/Process
All customer requirements were con sider ed in this line of paper stock/process pumps... excellenthydraulic coverage, high efficiency, extreme ease of maintenance, and mechanical reliability.
The Model 3185 pump furnished with ISO or JIS flange drilling, metric fasteners, dimensions.Open, enclosed or ShearpellerTM impellers available. Features i-ALERT™ condition monitoring as-standard.
Model 3180 standard with ANSI flanges.
lCapacities to 26,000 GPM (6000 m3/h)
lHeads to 410 feet (125 m)
lTemperatures to 446° F (230° C)
lPressures to 232 PSIG (16 bar)
Materials:All Iron/316SS Trim,316SS, 317SS,CD4MCu
High Temperature Paper Stock/Process
End suction, top centerline discharge, self-venting. Centerline mounted forhigh temperature services. High efficiency enclosed impeller. TaperBoreTM sealchamber standard with mechanical seal arrangement.Features i-ALERT™ condition monitoring as-standard.
lCapacities to 13,000 GPM (3,000 m3/h)
lHeads to 410 feet (125 m)
lTemperatures to 572° F (300° C)
lPressures to 360 PSIG (25 bar)
Materials: Duplex SS
Medium Consistency SystemsThick stock pulp is pumped with the model 3500XD enhancedperformance medium consistency pumping system.System includes engineered standpipe, control valve, dilutionsystem and level transmitter. A patented air separation deviceremoves air from the pulp to improve mixing effectiveness.Bleaching chemicals and oxygen are mixed in-line with themodel 3501 mixer with Double Shear™ rotor, optimized injectionport, and unique low pressure drop casing design.
lConsistencies from 8% to 16%
lCapacities to 1,500 (pump) and 2,000 adstpd (mixer)
lPressures to 325 PSIG (22 bar)
lMaterials from 316SS to Titanium
Model NM3171
Model 3171
Vertical Sump and ProcessThe “Veteran” vertical sump and processpump. Thousands of installa tions —industrial process, sump drainage,corrosive liquids, pollution control,molten sulfur. Rugged, heavycon struction. Simple mounting.
lCapacities to 3,180 GPM(722 m3/h)
lHeads to 344 feet (95 m)
lTemperatures to 450° F(232° C)
lPit Depths to 20 feet (6 m)
Materials: Cast Iron, Bronze-fitted, Carbon Steel, 316SS, Alloy 20, Hastelloy B and C,Duplex SS
FRP Vertical Sumpand ProcessDesigned for tough chemicalsump pump applications. TheFiberglass reinforced Vinyl Esterconstruction provides excellentcorrosion resistance inaggressive acidic and causticservices. The true volute designprovides the highest efficienciesin the industry for FRP pumps.
lCapacities to 1,400 GPM (318 m3/hr)
lHeads to 500 feet (152 m)
lTemperatures to 200° F(93° C)
lPressures to 220 psig (15 bar)
Model CV 3171
Vertical Sump and ProcessThe CV 3171 is a recessed impeller,circular volute type sump pump. Ideal for large solids and shearsensitive fluids. Circular volute minimizes radial loads makingthis the ideal pump for low flowprocess applications.
lCapacities to 2,700 GPM(610 m3/h)
lHeads to320 feet (126 m)
lTemperatures to450° F (232° C)
lPit Depths to 20 feet (6 m)
Materials: Cast Iron,Duplex SS, 316SS, Alloy 20,Hastelloy B and C
5
PROCESS PUMPSPROCESS PUMPS
Materials: Glass reinforced Vinyl Ester.Other resins available upon request
ANSI PROCESS PUMPS
Model 3196 Model HT 3196
ANSI Process
This is the original ANSI pump that has become the standard of the industry. Over 1,000,000installations attest to the remarkable performance of the 3196.
Available with a wide range offeatures for handling difficultapplications. i-FRAME™ power endsmaximize reliability and MTBF (MeanTime Between Failure).
lCapacities to 6,000 GPM (1364 m3/h)
lHeads to 730 feet (222 m)
lTemperatures to 500° F (260° C)
lPressures to 375 PSIG (26 bar)
Materials: Ductile Iron, 316SS,CD4MCu, Alloy 20, Monel, Nickel,Hastelloy B and C, Titanium
ANSI High Temperature Process PumpCenterline mounted in a heavy duty fabricated steel casing support, the Model HT 3196minimizes shaft misalignment and piping strain associated with elevated temperaturesup to 700° F. This eighth member of the ANSI pump family features Goulds premieri-FRAME™ power end, multiple seal chamber options including the Taper BoreTM Plus, and a wide variety of rigid and rugged mounting systems.
lCapacities to 4,500 GPM (1,023 m3/h)
lHeads to 925 feet (282 m)
lTemperature to 700° F (372° C)
lPressures to 450 PSIG (31 bar)
Materials: Carbon Steel, 316SS, CD4MCu, Alloy 20, Hastelloy C
Model LF 3196
Low Flow ANSI Process
Designed specifically to provide superior performance for low flow services.Features a concentric (circular volute) casing and open radial vane impellerto eliminate hydraulic and mechanical problems at low flows. i-FRAME™ power ends.
lCapacities to 220 GPM (50 m3/h)
lHeads to 925 feet (282 m)
lTemperatures to 700° F (372° C)
lPressures to 450 PSIG (31 bar)
Materials: Ductile Iron,316SS, CD4MCu, Alloy20, Hastelloy B and C
Model 3796
Model 3996
In-Line ANSI Process
For corrosives, abrasives, and hightemperature. Fully open impeller,back pull-out design, heavy dutyconstruction. Field alignment notrequired.
lCapacities to 1,500 GPM (340 m3/h)
lHeads to 700 feet (213 m)
lTemperatures to 500° F (260° C)
lPressures to 375 PSIG (26 bar)
Materials: Ductile Iron, 316SS,Alloy 20, Monel, Nickel, Hastelloy Band C, CD4MCu, Titanium
Self-Priming ANSI Process
One-piece casing eliminates need for separate priming chamber, airseparator, valves, or by-pass line. Fully open impeller can be trimmed to meet specific hydraulic requirements. i-FRAME™ power ends.
lCapacities to 1,250 GPM (284 m3/h)
lHeads to 430 feet (131 m)
lTemperatures to 500° F (260° C)
lSuction Lifts to 25 feet (7.6 m)
Materials: Ductile Iron, 316SS, CD4MCu, Alloy 20, Hastelloy B and C, Titanium
ANSI PROCESS PUMPS
Model CV 3196
Non-Clog ANSI Process
Perfect solution for handling bulky, fibrous, or shear-sensitive liquids. Recessed impellerdesign provides non-clog pumping withminimum solids degradation. Capability tohandle liquids containing 10 to 20 percentair/gas. i-FRAME™ power ends.
Materials: Ductile Iron,CD4MCu, Alloy 20,Hastelloy B and C
lCapacities to 2,700 GPM (610 m3/h)
lHeads to 440 feet (134 m)
lTemperatures to 500° F (260° C)
lPressures to 285 PSIG (20 bar)
6
SEALED LINED & NON-METALLIC
SEALLESS PROCESS PUMPSSEALLESS PROCESS PUMPS
Self-Priming Lined
When suction pressure is negative and air or gases must beevacuated to accomplish pump priming, the SP 3298 has aself-priming dual volute that primes on demand with only aninitial charge of liquid in the casing. Priming is accomplishedwithin the casing, eliminating the need for auxiliary primingsystems.
lCapacities to 275 GPM (63 m3/h)
lHeads to 150 feet (46 m)
lTemperatures to 250° F (121° C)
lPressures to 175 PSIG (12 bar)
lEffective Static Lift to 20 feet (6m)
Lining Material: Tefzel® (ETFE)
Model NM3196
FRP ANSI Process
The Fiberglass reinforced Vinyl Ester construction provides excellentcorrosion resistance in many aggressive acidic and caustic services.The random glass orientation and generous ribbing provides flangeload ratings equal to a metal pump of the same size. The truevolute design provides the highest efficiencies in the industry forFRP ANSI pumps.
lCapacities to 1400 GPM (318 m3/h)lHeads to 4500 feet (152 m)lTemperatures to 200° F (93° C)lPressures to 220 PSIG (15 bar)
Materials: Glass reinforced Vinyl Ester. Other resins available upon request
Vertical ANSI Lined Process
Ideal for moderate to severecorrosives. With or without solids,the 3298 can handle the toughchemical services. As a seallessdesign, its an effective alternativeto pumps with mechanical sealproblems. Meets strictest EPA regulations.
lCapacities to 320 GPM (270 m3/h)
lHeads to 460 feet (129 m)
lTemperatures to 250°F (121°C)
lPressures to 225 PSIG (16 bar)
Materials: Tefzel®
(ETFE) Construction
Magnetic Drive ANSI Lined
Designed to handle moderate tosevere corrosives with or withoutsolids. Sealless design provideseffective alternative to pumps withmechanical seal problems.Thick linings for extended pump life.
lCapacities to 425 GPM (95 m3/hr)
lHeads to 490 feet (150 m)
lTemperatures to 360° F (180° C)
lPressures to 275 PSIG (19 bar)
Magnetic Drive ANSI Process
Robust, simple sealless design idealfor difficult liquids, such as corrosives,pollutants, ultra-pure liquids and toxics.Meets ANSI dimensional specifications.Features a bearing cartridge for ease ofmaintenance and improved reliability.
lCapacities up to 700 GPM (159 m3/h)
lHeads to 550 feet (168 m)
lTemperatures to 536° F (280° C)
lPressures to 275 PSIG (19 bar)
Materials: 316SSOthers upon request
Model 3296 EZMAG
Lining Material: PFA
Model V 3298 Model 3299
Model SP 3298
Model 3198
Model 3298
Magnetic Drive ANSI Lined
Designed to handle moderate to severe corrosives with orwithout solids. Sealless design provides effective alternative to pumps with mechanical seal problems. Thick linings forextended pump life.
lCapacities to 1200 GPM (270 m3/hr)
lHeads to 530 feet (162 m)
lTemperatures to 250° F (121°C)
lPressures to 225 PSIG (16 bar)
Lining Material: Tefzel® (ETFE)
PFA Process ANSI Lined
Virgin PFA TEFLON® for handling a wide range ofsevere corrosive liquids, trace contaminants, andmixtures. The 3198 features ANSI B73.1 design,i-FRAME power ends. TEFLON® molded in placeby high pressure technique and mechanicallylocked.
lCapacities to 800 GPM (182 m3/h)
lHeads to 450 feet (137 m)
lTemperatures to 300° F (150° C)
lPressures to 225 PSIG (16 bar)
Material: PFA Teflon®
7
Model ICM
ISOMetallic Magnetic Drive Process
The ICM pump is the optimum metallic sealless pump for process fluid services in thechemical, paper, and general industries where ISO dimensions are preferred. The ICM isspecifically designed to pump difficult fluids such as corrosives, pure, and toxic liquids.Its sealless, sturdy design combines with a wide variety of wet end materials. The bearingsare chemical and abrasion resistant Silicon Carbide (SSiC).Optional Dryguard™ dry-run protection can be provided.
lCapacities to 1,760 GPM (400 m3/h)
lHeads to 685 feet (210 m) at 3,500 rpm
lTemperature ranges from -40° F to 360° F (-40° C to 180° C)
lPressures to 232 PSIG (16 bar)
Materials: Stainless Steel, Hastelloy, Ductile Iron and Alloy 20
Model ICMP
High Temperature ISOMetallic Magnetic Drive Process
The ICMP is a heavy-duty metallic sealless pump for applicationswith high temperature and pressure conditions. It is designed foraggressive, toxic and pure media. The centerline casing is optimalfor the compensation of dimensional changes due to temperaturefluctuations. SSIC silicon carbide plain bearings, optionally withDryguard™ dry run protection. Unique cartridge plain bearingdesign. Inducer option.
lCapacities to 1,760 gpm (400 m3/h)
lHeads to 685 ft (210 m) at 3500 rpm
lTemperature ranges from - 40° F to 535° F (- 40° C to 280° C)
lPressures to 365 PSIG (25 bar)
Materials: Stainless Steel, Hastelloy, Cast Ironand Alloy 20
ISO PROCESS PUMPS
Model ICB
Close-coupled ISO Process Pump
The ICB Series is an extension to the IC series ISO 5199 frame mounted chemical pumpseries. These new pumps provide a compact and economical pumping solution ideal forOEM applications and confined spaces in industrial processes. No spacer coupling oralignment is required, reducing capital equipment costs and simplifying installation andmaintenance. ICB pumps are fitted with our patented CycloneSeal Chamber, proven to provide the optimum sealingenvironment for extended mechanical seal life.
lCapacities to 1,980 GPM (450 m3/h)lHeads to 492 feet (150 m)lTemperature ranges from -40° F to 284° F (-40° C to 140° C)lPressures to 230 PSIG (16 bar)
Materials: Ductile Iron, Carbon Steel, 316SS, Duplex SS
ISO PROCESS PUMPS
Model IC
ISO Process
This series is designed in accordancewith ISO 5199 and ISO 2858, making itideal for worldwide chemical or industrialprocess applications. IC pumps are fittedwith a patented seal chamber designcalled the Cyclone seal chamber, whichhas been proven to provide the optimumsealing environment for extendedmechanical seal life. Optional inducerreduces NPSHr.
lCapacities to 1,980 GPM (450 m3/h)
lHeads to 482 feet (150 m)
lTemperature ranges from
-40° F to 350˚ F (-40° C to 177° C)
lPressures to 235 PSIG (16 bar)
Materials: Ductile Iron, Carbon Steel,316SS, Duplex SS, Alloy 20, Hastelloy Cand Titanium.
Model ICP
High Temperature ISOProcess Pump
The ICP is a heavy duty chemical process pump designed forextreme temperatures and pressures. The ICP complies withISO standards and features the patented Cyclone SealChamber for extended seal service life. Centerline casingdesign is self venting. Large capacity oil sump providesmaximum bearing cooling. Optional inducer reduces NPSHr.
lCapacities to 1,980 GPM (450 m3/h)
lHeads to 492 feet (150 m)
lTemperature ranges from
-40° F to 535° F (-40° C to 280° C)
lPressures to 363 PSIG (25 bar)
Materials: Carbon Steel, 316SS, Alloy 20,Duplex SS and Hastelloy C
8
API 610 PROCESS PUMPS
Model 3700 & 3710 API 610 OH2
Model 3600 API-610 BB3 Model 3910 API-610 OH3
Overhung Process
High temperature and high pressure process pumps designed to fully meet therequirements of API-610. Centerline support for high temperature stability, maximumrigidity. Tangential discharge for maximum hydraulic efficiency.
Available in top suction design (Model 3710).
lCapacities to 6,500 GPM (1475 m3/h)
lHeads to 1,200 feet (360 m)
lTemperatures to 800° F (427° C)
lPressures from full vacuum to 870 PSIG (60 bar)
Materials: All API materials, custom materials available
Models 3620 & 3640 API 610 BB2
Single and Two-Stage Between Bearings
Between bearings, radially split process pumps designed for smooth, reliable operation.Fully meets requirements of API-610.
lCapacities to 19,300 GPM(4380 m3/h)
lHeads to 2,500 feet (760 m)
lTemperatures to 850° F (455° C)
lPressures to 1,000 PSIG (69 bar)
Materials: All API materials, custommaterials available
Vertical In-Line with Bearing Frame
High pressure, high temperature servicesmeets API-610 requirements. Back pull-out for ease of maintenance. Bearingframe carries pump loads.
lCapacities to 7,500 GPM (1700 m3/h)
lHeads to 750 feet (225 m)
lTemperatures to 650° F (343° C)
lPressures to 595 PSIG (41 bar)
Materials: All API materials,custom materials available
API 610 PROCESS PUMPS
Model API 3171 (VS4)
API 610 Vertical Sumpand Process
For all refinery services requiringtank mount or sump duties. Fullycompliant with 9th and 10theditions ISO 13709 / API610
lCapacities to 3,180 GPM(722 m3/h)
lHeads to 525 feet(160 m)
lTemperatures to450°F (232°C)
lPit depths to 20 feet(6m)
Materials: Carbon Steel,12% Chrome Fitted,316SS, Duplex SS
Heavy Duty Multi-Stage
Advanced design with proven operating history.Axially split, with many enhanced features that make it anextremely reliable, high performance pump well-suited toa wide range of services.
lCapacities to 8,500 GPM (1930 m3/hr)
lHeads to 9,000 feet (2740 m)
lTemperatures to 400° F (205° C)
lPressures to 4,000 PSIG (276 bar)
Materials: All API materials, custom materials available
9
Model 3610 API-610 BB1
Horizontal Split Case, Double Suction
Designed for a wide range of industrial, municipal, and marine services.
lCapacities to 50,000 GPM (11355 m3/hr)
lHeads to 700 feet (215 m)
lWorking pressures to 300 PSIG (21 bar)
lTemperatures to 300° F (150° C)
Materials: All API Materials, Custom Materials Available
SUMP/ABRASIVES/SOLIDS
Vertical Cantilever
Ideal for range of tough sump services... abrasiveslurries — mine slurry, fly ash, foundry sand, clay,coal prep, power plants, or large solids handling.
Models VJC lCapacities to 7,500 GPM (1,703 m3/h)
lHeads to 240 feet (73 m)
lSolids to 2.25 inches (57 mm)
Materials: Cast Iron, High Chrome Iron, 316SS
Model VHS lCapacities to 7,000 GPM
(1,590 m3/h)
lHeads to 140 feet (43 m)
lSolids to 10 inches (254 mm)
Materials: Cast Iron, High Chrome Iron, 316SS
VJC
VHS
Model HSU, HSUL & JCU
Model VHS & VJC
Submersible
Three different models allow selection of the very best pumpfor the service conditions whether large, stringy, fibrous solids,or abrasive slurries.
lCapacities to 4,000 GPM (910 m3/h)
lHeads to 220 feet (67 m)
lTemperatures to 194° F (90° C)
lSolids to 6 inches (152 mm) HSU JCU HSUL
Solids Handling Self-Priming
Goulds Trash Hog is designed for superior solids handlingcapability, optimum pump performance, and extreme easeof maintenance for a wide range of industrial, pulp andpaper, mining, and wastewater services. Whether handlingsludge, debris or plant wastes, theres no other pump thatcompares to the Trash Hog.
lCapacities to 6,000 GPM (1,363 m3/h)
lHeads to 140 feet (43 m)
lTemperatures to 225° F (107° C)
lPressures to 85 PSIG (6 bar)
lSuction Lifts to 25 feet (7.6 m)
lSpherical solids to 3 inches (76 mm)
Materials: Cast Iron, Stainless Steel, CD4MCu, High ChromeIron Fitted
Trash Hog®
SUMP/ABRASIVES/SOLIDS
Materials: Cast Iron, High Chrome Iron,CD4MCu, 316SS
10
ABRASIVES/SOLIDS HANDLING
Medium Duty Slurry
Ideal for most medium duty abrasive and/or corrosive slurryservices. Extra thick wet end components extend wear life.Replaceable wear liner for low maintenance cost. Available withdynamic seal for elimination of seal problems, reducedmaintenance. Variety of drive arrangements availablefor application flexibility.
lCapacities to 7,000 GPM (1,600 m3/h)
lHeads to 240 feet (73 m)
lTemperatures to 250° F (120° C)
lPressures to 150 PSIG (10 bar)
lSolids to 2.25 inches (57 mm)
Materials: Cast Iron, High Chrome Iron, 316SS, CD4MCu,Endura Chrome
Models SRL/SRL-C/SRL-S/SRL-XT
Model JC
Model 5500 Model VRS
Model HS
Abrasive Slurry Handling
The SRL pumps are designed to handle the toughestabrasive slurry. Features include wear-resistant rubber linersfor maximum life and engineered for ease of maintenance.The SRL-S uses a “Shearpeller” for froth applications.
lCapacities to 20,000 GPM (4,540 m3/h)
lHeads to 150 feet (46 m)
lTemperatures to 250° F (121° C)
lPressures to 500 PSIG (35 bar)
Lining Materials: Natural Rubber, Neoprene, Nitrile,Polyurethane, Chlorobutyl, Hypalon, EPDM, CeramicComposites and Metal Alloys
Severe Duty Slurry
The “Workhorse” of severe duty slurry pumps. Its not onlybuilt to stand up to the toughest services, but the Model 5500is also designed for extreme ease of maintenance. A heavyduty power end, extra thick wall sections, and easilyreplaceable wear parts add up to long, reliable operation.
lCapacities to 11,000 GPM (2,500 m3/h)
lHeads to 370 feet (113 m)
lTemperatures to 250° F (121°C)
lPressures to 500 PSIG (35 bar)
lSolids to 4 inches (102mm)
Materials: High Chrome Iron, CD4MCu, Endura Chrome
Hydro-Solids
For handling sludges and slurries containing large solids, entrainedair, fibrous materials, corrosives and abrasives. Features recessed,non-clog impeller.
lCapacities to 7,000 GPM (1,590 m3/h)
lHeads to 140 feet (43 m)
lTemperatures to 200° F (93° C)
lPressures to 100 PSIG (7 bar)
lSolids to 10 inches (254 mm)
Materials: Cast Iron, High Chrome, Iron, 316SS, CD4MCu
ABRASIVES/SOLIDS HANDLING
11
Abrasive Slurry Handling
The VRS is designed using theproven reliability of the SRL andGoulds cantilever pumps. VRS offershigher efficiencies, with maximumreliability and interchangeability.Offered in standard lengths and avariety of elastomers.
lCapacities to 1,500 GPM (341 m3/h)
lHeads to 120 Feet (37m)
lTemperatures to 250° F(121° C)
lPressures to 75 PSIG(5 bar)
Lining Materials:Natural Rubber,Neoprene, Nitrile,Polyurethane,Chlorobutyl, Hypalon,EPDM, and Metal / Alloyimpeller available.
High Pressure Multi-Stage
Radially split, segmented multi-stage pump; a proven state-of-the-art design for the most demanding high pressureservices. Many special features for application flexibility.Ideal for cogeneration, boiler feed, reverse osmosis, booster,water and oil.
lCapacities to 1,200 GPM (272 m3/h)
lHeads to 5,400 feet (1,646 m)
lTemperatures to 374° F (190° C)
lPressures to 2,465 PSIG (170 bar)
Materials: 12% Chrome/Cast Iron and 12% Chrome/316ss
Heavy Duty Multi-Stage
Advanced design with proven operating history.Axially split, with many enhanced features that make it anextremely reliable, high performance pump well-suited toa wide range of services.
lCapacities to 4,500 GPM (1,020 m3/h)
lHeads to 6,000 feet (1,825 m)
lTemperatures to 400° F (205° C)
lPressures to 2,500 PSIG (172 bar)
Materials: All API materials, custom materials available
Model 3600 API 610 BB3 Model 3311
Centrifugal Diffuser Multi-Stage
Centrifugal diffuser type multi-stage pumps well suited for boiler feed,reverse osmosis, petrochemical and hydrocarbon services.
lCapacities to 140 GPM (32 m3/h)
lHeads to 2,600 feet (792 m)
lTemperatures to 400° F (204° C)
lPressures to 1,500 PSIG (103 bar)
Material:Carbon Steel
Model 3393
High Pressure Multistage Ring Section Pump
Radially split, segmented casing, multistage pump designed with modular interstagecomponents. Its multiple suction nozzle and discharge nozzle orientations allow adaptationto multiple piping installations. Multiple hydraulics for each pump size optimize efficiencyacross a vast range of applications. These pumps are particularly well suited for reverseosmosis and boiler feed applications. Shower services, booster service and other highpressure services are applications where it may be applied.
lCapacities to 3,200 GPM (727 m3/h)
lHeads to 3,200 feet (975 m)
lTemperatures to 400° F (205° C)
lPressures to 1600 PSIG (110 bar)
Materials: Carbon Steel, Carbon Steel/12% Chrome Fitted,12% Chrome, Duplex and Super Duplex
Multi-Stage
Multi-stage ring section pumpdesigned for high pressure servicesincluding: boiler feed, reverseosmosis, shower service, andmuch more.
lCapacities to 1,500 USGPM(340 m3/h)
lHeads to 1,640 feet (500 m)
lMax. speed to 3,600 rpm(3,600 min-1)
lDischarge from 11/2" to 5"
lTemperatures to 280° F (140° C)
lPressures to 800 PSIG (55 bar)
Materials: Cast Iron, Stainless Steel, Stainless Fitted
Model 3355
Model 3935
MULTI-STAGE/AXIAL FLOW/DOUBLEMULTI-STAGE/AXIAL FLOW/DOUBLE
12
3400 Series
13
Model Axial Flow ®
Axial Flow
For continuous circulation of corrosive/abrasive solutions,slurries, and process wastes. Fabricated elbow or castelbow designs available. Most suitable for low head, highcapacity pumping.
lCapacities to 350,000 GPM 79,545 m3/h)
lHeads to 33 feet (10 m)
lTemperatures to 350° F (180° C)
lPressures to 150 PSIG (10 bar)
lSolids to 9 inches (228 mm)
Materials: Cast Iron, 304SS, 316SS, CD4MCu,Nickel, Monel, Alloy 20, UHB-904L, Titanium,Hastelloy, Sanicro 28
Two-Stage Splitcase
Horizontal splitcase pumps are ideally suited for boilerfeed, mine dewatering, and other services requiringmoderately high heads with a wide range of operatingconditions.
lCapacities up to 3,000 GPM (681 m3/h)
lHeads to 1,000 feet (305 m)
lTemperatures to 350° F (177° C)
lPressures to 550 PSIG (38 bar)
Materials: Bronze-fitted, Cast Iron, Bronze, 316SS
Model 3316
Horizontal Split Case, Double Suction
Designed for a wide range of industrial, municipal, and marine services.
lCapacities to 225,000 GPM (51,135 m3/h)
lHeads to 900 feet (274 m)
lSuction sizes to 78" and discharge sizes to 66”
lWorking pressures to 400 PSIG (27.6 bar)
lTemperatures to 350° F (177° C)
Materials: Cast Iron/Bronze, All Iron, All Bronze, Cast Iron/Stainless Steel, All Stainless Steel
SMALL CAPACITYModel 3410
(to 8,000 GPM/1,818 m3/h)
MEDIUM CAPACITYModel 3409
(to 12,000 GPM/2,727 m3/h)
LARGE CAPACITYModel 3420
(to 65,000 GPM/14,772 m3/h)
EXTRALARGE CAPACITYModel 3498
(to 225,000 GPM/51,135 m3/h)
WASTEWATER/VERTICALWASTEWATER/VERTICAL
Model WCAX, YDD, WCA, WCB, WMCC & WMCE
Wet Pit Column Pumps
Wet Pit Column Pumps are custom designed formaximum reliability and high efficiency.
lCapacities to 500,000 GPM (114,000 m3/h)
lHeads to 600 feet (185 m)
Materials:Bronze Fitted, All Bronze, SS Fitted, Ni Resist, All SS
Model NSW
Small CapacitySewage Pump
Single stage – enclosed non – clogtype impeller for pumping wastewaterand other non-corrosive liquids withsoft solids.
lCapacities to 9,000 GPM (2,044 m3/h)
lHeads to 275 feet (84 m)
lSolids to 6.38inches (162 mm)
Materials:Cast Iron, 2-3% Nickel Cast Iron, Ductile Iron
Model NSX
Small CapacitySewage Pump
Single stage – open Shearpeller impellerspecially designed for pumpingwastewater, with fibrous or stringy solids.
lCapacities to 4,000 GPM (908 m3/h)
lHeads to 100 feet (30 m)
lSolids to 5.31 inches (133 mm)
Materials:Cast Iron / 431SS Fitted
*Also available in verticalconfigurations (NSXV)
*Also available in verticalconfigurations (NSYV)
*Also available in verticalconfigurations (NSWV)
*Also available in verticalconfigurations (SSEV, SSFV, WSYV)
Model NSY
Medium CapacitySewage Pump
Single stage – enclosed mixed flow type impeller for pumping wastewaterand other non-corrosive liquids with soft solids.
lCapacities to 23,000 GPM
(5,223 m3/h)
lHeads to 85 feet (26 m)
lSolids to 9 inches (229 mm)
Materials:Cast Iron, 2-3% Nickel Cast Iron, Ductile Iron
Models SSE, SSF & WSY
Large Capacity Sewage Pumps
The pumps are designed with large, unobstructedpassages through the impeller and volute which makethem ideally suited for pumping sewage, waste water,and storm water.
lCapacities to 140,000 GPM (31,800 m3/h)
lHeads to 230 feet (70 m)
Materials:Cast Iron, 2-3% Nickel Cast Iron, Ductile Iron
14
Model VMP
Vertical Marine
Goulds Model VMP pump is anautomatically self-priming unitdesigned specially for efficientunloading and stripping of producttankers and barges.
lCapacities to 20,000 GPM(4,542 m3/h)
lHeads to 635 feet (194 m)
lTemperatures to 250° F (120°C)
VERTICAL TURBINESVERTICAL TURBINES
Model VIS
Vertical Submersible
For deep settings or where use of lineshaftpumps is impractical. For irrigation, service water,deep well supply, offshore and mine dewatering.
lCapacities to 7,000 GPM (908 m3/h)
lHeads to 1,400 feet (427 m)
Materials:Any Machinable Alloy
Model VIT
Vertical Industrial Turbine
A wide range of hydraulic conditionsallows meeting requirements of virtuallyevery pumping service. Designed to meetcustom specifications of the user.Model VIT can-type turbine meetsAPI-610 specifications.
Model VITlCapacities to 65,000 GPM
(14,762 m3/h)
lHeads to 3,500 feet (1067 m)
lTemperatures to 450° F(232° C)
Materials: Any Machinable Alloy
Model VIC
Vertical Can-Type
A wide range of hydraulic conditions allowsmeeting requirements of virtually everypumping service. Designed to meet customspecifications of the user. Model VIC can-type turbine meets API-610 specifications.
Model VIClCapacities to 65,000 GPM
(18,168 m3/h)
lHeads to 3,500 feet (1,070 m)
lTemperatures to 500° F (260° C)
Materials: Any Machinable Alloy
15
Form BRPSG 5/10
Whether its for severe corrosives,abrasive slurries, fibrous/stringy solids,
high temperature liquids, hazardousfluids, low flow or high capacity
services – Goulds has a perfect,reliable solution. The Goulds selection
of fluid solutions includes horizontal and vertical configurations in a range
of alloy and non-metallic constructions,sealed and sealless. Goulds wide
range of products ensures that we have the right pump for virtually
every application.
2A LIQUID PROPERTIES
Liquid: __________________
Vapor Pressure: __________
Specific Heat: ____________
Viscosity:________________
Solids Size/Content: _______
Specific Gravity: __________
Temperature:_____________
Characteristics: (flammable,explosive, carcinogenic, toxic,noxious, regulated, etc.):__________________________
The following Pump Selection Checklist is designed to assist users in reviewing most pump requirements for ultimate selectionof the best pump. Your Goulds representative has been specially trained in pump application and should be contacted to assistin final pump selection for optimum reliability and safety.
Pump Selection Checklist
1B
Pump Size _____________
Impeller diameter ________
HP, efficiency ___________
NPSHR ________________
Minimum Pump Flow _____
Speed (RPM) ___________
2B
Materials ofConstruction ____________
Bearing cooling__________
Sealing/flushingrequirements____________
Jacketing forcooling/heating __________
3B
Explosion-proof enclosures______________________
Safety protection options______________________
Coupling guard options______________________
Casing drain ____________Flange options __________O-ring materials _________
4B
Type of lubrication _______
Start-up assistance_______
Operator training_________
Maintenance training _____
Baseplate options________
Oil seal options__________
1A SYSTEM
Service:________________
Capacity:_______________
Total Dynamic Head: _____
NPSH Available: _________
Suction Pressure: ________
Minimum Flow Rate:______
Total Working Pressure: ___
3A SAFETY/ENVIRONMENTAL
l UL label (explosion-proof enclosures)
l Regulations (government, local, plant)
l Temperature limits
l Fugitive emission limits
l Product purity
l Best Available Control Technology
l Reporting requirements
4A ECONOMY/RELIABILITY
l MTBF requirements
l Lubrication
l Cooling/Heating
l Operator experience
l Operator maintenance
l Extra product filtering
l Ease of installation
Pick Your Perfect Process PumpI.
REQ
UIRE
MEN
TSII.
PUM
P
© 2008 Goulds Pumps, IncorporatedA subsidiary of ITT Corporation
Visit our Web site at www.gouldspumps.com