Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Goulds 3409 Medium Capacity, Single Stage,Double Suction Pump
Double Suction Pumps Designed for a Wide Range of Industrial, Marine and Power Generation Services
• Capacities to 12,000 GPM (2725 m3/h)
• Heads to 850 feet (259 m)
• Temperatures to 250° F (120° C)
• Working Pressures to 400 PSIG (2758 kPa)
Design Features
• Horizontally Split Casing - In-line suction and discharge nozzles in lower half casing for ease of inspection/maintenance.
• Double Suction Impeller - Assures Hydraulic Axial Balance for lower thrust bearing loads, longer pump life, and low maintenance.
• Wear Rings - Easily replaceable wear rings renew running clearances, protect against impeller, casing wear. Overall cost of operation is minimized.
• Sealing Flexibility - Choice of packing or wide range of mechanical seals.
• Installation Versatility - Horizontal or vertical mounting, clockwise or counter clockwise rotation. • Material Flexibility - Available in a wide variety of metals from cast iron to stainless steels.
Services
• Process - Quench water, stripper bottoms, reboiler circulation, cooling tower
• Pulp & Paper - Primary and secondary cleaner, filtrate, mill water supply shower, fan pump
• Primary Metals- Cooling Water, Quench and Leaching
• Municipal - High Lift, Low Lift, Wash Water, Waste Water, Raw Water
• Power Generation - Cooling Tower, Component Cooling, Service Water, Ash Sluicing, Heater Drain
• Marine - Bilge and Ballast, Cargo, Cooling Water, Fire Pump
• General - River Water, Brine, Sea Water
2 3409
3409
Item Number
100
101
Part Name Bronze Fitted All Iron 316SS Fitted All 316SS
Material
105
106
107
250
122
124
126
127
134
142
168 & 410
Casing Cast Iron
Cast Iron
Cast Iron
Cast Iron
Cast Iron
Cast Iron
Cast Iron
Cast Iron
316SS
316SS
316SS
316SS
316SS
Nitronic 60
Nitronic 60
316SS
Impeller Bronze
Bronze
Bronze
Bronze
Bronze
Bronze
Lantern Ring PTFE
Graphite Impregnated Yarn
Carbon Steel1
Cast Iron
Steel (Anti-Friction)
Packing
Packing Gland
Mechanical Seal Gland
Shaft
Shaft Sleeve Nut
Shaft Sleeve2
Casing Wear Ring
Bearing Housing
Impeller Wear Ring (optional on 3409)
Bearings
Parts List and Materials of Construction
127
106
124
122
168
105
107
205
410
134
126
101
100
3409 3
Sectional View
3409 Medium Capacity, Single Stage, Double Suction PumpsHeavy Duty Design Features for a Wide Range of Heavy Duty Industrial, Marine and Power Generation Services
HIGH THRUST CAPABILITY Spherical roller bearings handle unexpected thrusts. Secured withlocknut and washer.
RENEWABLE CASE WEAR RINGS Permits easy maintenance of properrunning clearances. Locked in lowerhalf casing to prevent rotation.
LARGE INLET AREAS Assures smooth flow toimpeller inlet for efficient,quiet operation.
HEAVY DUTY SHAFT Designed to reduce deflection. Renewable shaft sleeves fully protect shaft from pumpage. Threaded sections removed from stress areas.
4 3409
LABYRINTH BEARING PROTECTION Labyrinth bearing isolators significantly reduce the chance for bearing contamination and greatly improve mean time between failures.
DOUBLE SUCTION IMPELLER Minimizes axial thrust. Highly efficient for smooth, vibration-free operation.
DUAL VOLUTE CASING DESIGN Dual volutes having cutwaters 180º apart provide opposing radial forces reducing radial loads on bearings and minimizing shaft deflection. Permits smooth, trouble-free operation over wide range of flow rates.
POSITIVE LIQUID SEALING Gaskets between impeller and sleeves, and O-rings between sleeves and sleeve nuts protect shaft from pumpage or confined corrosion attack.
RENEWABLE IMPELER WEAR RINGS AVAILABLE A must for proper maintenance of running clearances. Rings are mechanically locked onto impeller hubs.
HEAVY DUTY CASING Casing walls designed to withstand pressure extremes. Rugged design resists external forces and vibrations. Both suction and discharge connections in lower half casing. Removal of upper half casing permits inspection, maintenance and removal of the complete rotating element without disturbing piping or driver.
3409 5
6X10-22
10000
100
150
200
250
300
400
500
600
750(200)
(150)
(100)
(75)
(50)
(40)
(30)
(20)
1500
(300) (400) (500)
2000 4000 5000 10000
8X12-22M
8X12-22L
8X12-27
10X14-20S
14X16-17
12X16-23
10X14-20L
2000
(750)
MODEL 3409 – 1785 RPMTO
TAL
HEA
D –
FT
(m)
TOTA
L H
EAD
– F
T (m
)
MODEL 3409 – 1180/880 RPM
CAPACITY – GPM (m3/h)
CAPACITY – GPM (m3/h)
500
(200)(150) (300) (500) (750) (1000) (2000)(1500)(400)
1000 1500 2000 3000 5000 10000
(1000) (1500) (2000) (3000)(300)
0
500
8801180
10
20
30
40
5060
80
100
150
200
300
400
(100)
(75)
(50)
(40)
(30)
(20)
(15)
(10)
(5)
(4)
(300) (1000)
10X14-20S
14X16-17
10X14-20S
8X12-22M
6X10-228X12-22L
10X14-20L
8X12-27
14X18-23
14X18-28
14X18-23
14X18-28
12X16-23
14X16-17
12X16-23
6 3409
Hydraulic Coverage
X
HA
YY
S
C T
Z
OH
MINIMUM HEAD ROOM REQUIRED TO REMOVE UPPER HALF CASING
125#FF ANSI DISCHARGEFLANGE
125#FF ANSI SUCTIONFLANGE
O
D
HB
FrameGroup
Pump Size C T D OH O S & Z X HA HB Weight Lbs.(kg)X
37.9 (962) 6X10-22
S 8X12-22M 28.3 (718)
30.5 (775)
31.6 (802)
21.8 (552)
23.8 (603) 24 (610) 24 (610) 2050 (930)
24.8 (629)
19 (483) 12 (305) 24 (610) 18 (457)
21 (533)
23 (584)
23.5 (597)
24 (610)
26 (660)
38.9 (988) 8X12-22L
30.4 (772)
30.4 (772)
31.4 (798)
1545 (701)
1920 (871)
1930 (875)
43.9 (1115) 8X12-27 14.2 (360) 23 (584) 24 (610)
19 (483) 21 (533)
21 (533) 21 (533)
19 (483) 20
36.4 (924)
42.8 (1086) 10X14-20S
M 10X14-20L
48.9 (1242) 12X16-23
31.7 (804)
2940 (1334)
2000 (907)13 (330)
37.4 (949)
46.3 (1181) 14X16-17
47.6 (1210) 14X18-23L
56.8 (1441) 14X18-28
31.8 (806)14 (356)
35.1 (892)
44.7 (1135)
25 (635) 25 (635)
18 (457) 24 (610)
27 (686) 27 (686) 27 (711) 26 (660)
28 (711) 28 (711)
2600 (1179)
2860 (1297)
2940 (1334)
3255 (1476)
14 (356)
16 (406)
Sizes 6X10-22, 8X12-22M, 8X12-22L are furnished with 250# FF discharge flange as standard. Size 8X12-27 is furnished with 250# FF suction and discharge flange as standard. All dimensions in inches (mm) and are not to be used for construction or installation purposes. Standard rotation is right hand (CW). Optional rotation is left hand (CCW). Steel casings will have 150#RF or 300#RF flanges.
3409 7
Dimensions and Weights
Manufacturing/Assembly/Packaging
Direct Sales Offices
Service Centers (ITT)
Distribution Center
Visit our website at www.gouldspumps.com
240 Fall StreetSeneca Falls, NY 13148www.itt.com
B.3409.en-US.2017-06© 2017 ITT Corporation, Inc.
Wherever you are,we’re there too.
Reliability has no quitting time.Building on over 160 years of Goulds Pumps experience, PRO Services provides an array of services focused on reducing equipment total cost of ownership (TCO) and increasing plant output, including predictive monitoring, maintenance contracts, field service, engineered upgrades, inventory management, and overhauls for pumps and other rotating equipment.
Your Total Solution For Equipment Life Cycle Optimization
Control Solutions(PumpSmart)
Power Ends
Field Services
Training
Monitoring Solutions(ProSmart)
On-board Continuous Monitoring (i-Alert)
Reliability Engineering Pump Parts
Goulds Pumps/Bornemann
Energy Performance Services
Inventory Management
Rotating Equipment Repairs
Engineered Parts(ProCast)
Pump Upgrades
Pump Root Cause Analysis
Pump Replacements
Design & Sourcing
Part
s &
Inve
nt
ory
Operation Performance