GENERAL CATALOGUE

TC-22B／TC-20BTC32BN／TC-31B

S700X1／S500X1／S300X1R450X1／M140X1

BROTHER MACHINE TOOLS

ver.1407The information in this catalogue is current as of July 2014.

Specifications may be subject to change without any notice.

BROTHER INTERNATIONALE INDUSTRIEMASCHINEN GmbHMACHINE TOOLS DIVISION FRANKFURT TECHNICAL CENTERHoechster Str.94, 65835 Liederbach, Germany PHONE:(49)69-977-6708-0 FAX:(49)69-977-6708-80

Thailand

BROTHER COMMERCIAL THAILAND LTD.MACHINE TOOLS TECHNICAL CENTER1232 Rama 9 Road, Suanluang Sub-District, Suanluang District,Bangkok 10250, ThailandPHONE:(66)2-374-6447 FAX:(66)2-374-2706

China

BROTHER MACHINERY ( SHANGHAI ) LTD.( MACHINE TOOLS DIV. ) SHANGHAI TECHNICAL CENTERRoom B, 3/F., No.567, West Tianshan Rd., ChangNing District,Shanghai 200335, P.R.ChinaPHONE:(86)21-2225-6666 FAX:(86)21-2225-6688

China

BROTHER MACHINERY ( SHANGHAI ) LTD.DONGGUAN BRANCH ( MACHINE TOOLS DIV. ) DONGGUAN TECHNICAL CENTER1F, No.45 North Road Lianfeng, Xianxi Village, Chang’an Town, Dongguan,Guangdong Province, ChinaPHONE:(86)769-2238-1505 FAX:(86)769-2238-1506

India

BROTHER INTERNATIONAL (INDIA ) PVT LTD.BANGALORE TECHNICAL CENTERPark Landing, Ground Floor, Municipal No.5AC-709, 2nd Block, HRBR Extension, Bangalore - 560 043 Karnataka, IndiaPHONE:(91)80-6405-7999

BROTHER INTERNATIONAL CORP.MACHINE TOOLS DIV. TECHNICAL CENTER2200 North Stonington Avenue, Suite 270, Hoffman Estates, IL 60169, U.S.A.PHONE:(1)224-653-8415 FAX:(1)224-653-8821

Figures in brackets ( ) are the country codes.

U. S. A. Germany

China

BROTHER MACHINERY (SHANGHAI) LTD.CHONGQING BRANCH (MACHINE TOOLS DIV.) CHONGQING TECHNICAL CENTERRoom 29-7,Unit 3,Zhengsheng Bailaohui Building ,No.3 Xijiao Road ,Yangjiaping, Jiulongpo District, ChongqingPHONE:(86)23-6865-5600 FAX:(86)23-6865-5560

Global Service Sites

Local dealers are available to provide services in each region, in addition to the sites below.

Extensive product lineup offers the best solution to suit each production variation.

Two resolutions reflected in machines

#30 spindle taper Original NC

TC-20B

TC-31BQT FT

TC-22B

TC-32BN

#30 spindle taper

Low inertia andweight reductiong

Fast acceleration /deceleration spindle motorp

Spindle motor’s high torque in themedium- and high-speed range

Original NC

Achievement of optimalcontrol and operationsp

Elimination of any wastedoperations and timep

Pursuit of NC suitable forhigh-speed parts machining

Compact multi-tasking machine

Compact Machining Center

CNC Tapping Center

Faster ATC andpositioning

Our machines will bring about success to users producing mass-production parts.

Constantly pursuing the possibilities of#30 spindle machines

over a quarter of a century

High-performance model

Pallet changer machine

Table traverse machine

Column traverse machine

Excellentenvironmentalperformance

High machiningcapabilities

1 2

＊Data taken running machining program created by Brother

＊Data taken running machining program created by Brother

General M/C SPEEDIO

Approx.

80%less

Powerconsumptionfor one cycle

Airconsumptionfor one cycle

Po

wer co

nsump

tion （kW

h/cycle

）

Air co

nsump

tion （L/m

in

）

General M/C SPEEDIO

Approx.

80%less

High-speed operations and optimized control have been achieved by the #30 spindle taper and original NC, enabling the machine to demonstrate high productivity.

Reduction in power and air consumption results in a great decrease in CO2 emissions, making the machine more earth-friendly and providing high environmental performance.

Nonstop ATC

Pursuit of High Productivity

Fastest tool change among #30 spindle machines has been achieved by quick start/stop of the spindle, high acceleration and quick response when the Z-axis moves up and down, and optimized magazine operation.

Simultaneous operation

Using the original nonstop ATC code （G100） allows the machine to simultaneously position the X/Y-and additional axes while performing a tool change, leading to further reduction of wasted time.

World’s fastestsynchronized tapping

World's fastest highly accurate tapping has been achieved, using our original synchronized tapping control and a fast acceleration/deceleration spindle motor.

Highly rigid structure

Pursuit of Machining Capabilities

High-power spindle motor

High-speed, high-efficiency machining has been achieved using a spindle motor with high torque in the medium- and high-speed range. High-torque specifications (optional) greatly improve low-speed range torque, providing excellent heavy-duty machining for steel workpieces.

Low power consumption

Pursuit of Environmental Performance

Equipped with a power regeneration system that reuses energy generated when decelerating, high-efficiency motor, energy saving pump, LED work light and other energy saving functions, achieving low power consumption.

Low air consumption

Chip removal performance has been enhanced by optimizing the air purge path and air blast timing, greatly reducing air consumption.

Pursuit of Usability

Medium-and high-speed range enablinghigh-efficiency machining

Low-speed range suitable forheavy-duty machining

Cutting amount : 150 cc/minMaterial : Carbon steel（D16 end mill used）

Machiningdetails

■ Grooving using standard specs

Hole diameter : D40 mmMaterial : Carbon steel

Machiningdetails

■ Large hole drilling using high-torque specs

Machining support functions

Equipped with machining support functions, such as torque waveform display, high accuracy mode, and automatic heat expansion compensation.

Equipped with ‘shortcut’ keys to quickly open the desired screen, and ‘sub folders’ to make program management easier, in addition to a USB memory interface, menu programming function and tap return function.

Network function

High capacity program data can be transferred via Ethernet at high speed. A simple production monitoring function is also available, allowing you to display the machine’s production monitor screen on a personal computer.

System capacity

Standard equipped with PLC. 16 input and 16 output points are standard, and these can be expanded to up to 1024 points each （optional）.

Maintenance functions

Equipped with motor insulation resistance measurement, operation log, and maintenance notice functions.

Production monitor screen

CNC-C00 controller

Shortcut keys

OperabilityThe highly rigid structure and high-power spindle motor allow the machine to demonstrateits broad machining capabilities, from high-efficiency machining to heavy-duty machining.

Based on accumulated data using analysis technologies, a highly rigid structure with vibration suppressed has been achieved, allowing the machine to demonstrate excellent machining capabilities

Original NC with emphasis on usability improves work efficiency and operating rate at production sites.

3 4

High speed, high acceleration,and high response

Overwhelming High Productivity

Z-axis acceleration has been greatly improved, making machining faster. X/Y-axes acceleration has also been improved, achieving 2.0G on the X-axis and 1.3G on the Y-axis when the loading capacity is 150 kg. In addition to this, delay in response has been reduced to almost zero by increasing the responsiveness of the servo motor, leading to a great reduction in cycle time.

Optimized waste elimination control

The original NC drives machine performance to its fullest and optimizes operation with any wasted time eliminated. High productivity is ensured by achieving nonstop ATC where spindle start/stop, Z-axis up/down and magazine operation are optimally controlled, and by simultaneously positioning X/Y- and additional axes while performing a tool change.

Z-axis acceleration ： 2.2 G Chip - Chip ：

Tool - Tool ：

1.4S

0.8S

Highly rigid structure

One-class Higher Machining Capabilities

Machine rigidity has been further improved based on data accumulated over years using analysis technologies. For the Z-axis in particular, the stress path is reduced, leading to an improvement in rigidity of approximately 15%.

From high-speed, high-efficiency machiningto heavy-duty machining

Various spindle motor specifications are available to ensure broad machining capabilities, such as the standard specifications with medium- and high-speed properties enabling high-efficiency machining, and the high-torque specifications with low-speed properties suitable for heavy-duty machining.

Max. torque（momentary）

Max. output

Max. torque（momentary）

Max. output

Standardspecifications

High-torquespecifications（optional）

High-accuracy machining

Machining accuracy has been greatly improved by new servo control and offset functions, and a machine structure that minimizes the effects of thermal deformation. For example, the roundness in circular machining has been improved by approximately 30%

Three-dimensional machining

High-speed and highly accurate three-dimensional machining has been achieved by high-speed spindle specifications with a maximum speed of 27,000 min-1 （optional） and original three-dimensional machining control with look-ahead function and smooth path offset function.

Achieves overwhelming high productivity and environmental performance

High-performance model applicable to broad range of machining

Compact Machining Center

Look-ahead function

Comparison ofZ-axispositioning time

： 40Nm： 18.9kW

： 92Nm： 26.2kW

Circular machiningRoundness:

30% better

（Standard）

30 blocks（Optional）

200 blocks

Former model

Po

sitioning

time （m

s

）

SPEEDIO＊When moving from Z-axis zero point to stroke center

Diameter : D80 mmMaterial : Aluminum

Approx.

25%less

5 6

A compact high-speed and high-output （max. torque 55 Nm） built-in DD motor is used for the turning spindle. The maximum speed is 2,000 min-1.

A roller gear index unit is used for the tilt axis （A-axis）. This clampless index unit enables high-speed （60 min-1） and highly accurate indexing.

Original structure using two plungers （double plunger lock） is used to secure the turning tool. This ensures tool is reliably secured.

Wide jig area

Non-stop machining

Brother’s original high-speed 2-face pallet changer, the “QT （Quick Turn） table”, avoids lift-up operation and achieves high reliability through a sealed structure. Workpieces on one pallet can be changed while machining workpieces on the other pallet. Therefore, waste in workpiece change time is eliminated, enabling nonstop machining.

New 22-tool magazine

A new 22-tool magazine is available. This is mounted around the column, saving space and providing optimal weight balance, and is best suited for column traverse machines. Use of the turret type and the fast acceleration/deceleration spindle achieves high-speed tool change.

Process integration

Processes divided between two machines can be performed on one machine, making use of the 2-face pallet changer and the 22-tool magazine. Process integration improves the line balance and enables optimal equipment investment, leading to further improvement of production efficiency.

The standard jig area is quite wide, with a 1,020 mm turning diameter, 300 mm jig height, and 120 kg loading capacity (one face), making mounting the index table jig easier. The jig area can be optionally enlarged so that larger jigs can be mounted.

New 22-tool magazine

A new 22-tool magazine is mounted around the column, saving space. Using this with the fast acceleration/deceleration spindle achieves high-speed tool change, in addition to promoting process integration. Non-cutting time is reduced by simultaneously positioning all axes while performing a tool change

Process integrationon one machine

Handling time between machines can be reduced by integrating the turning process and milling process on one machine. Process integration enables improved machining accuracy through one-time chucking, reduction in operators, and optimal equipment investment.

Standard equipped with pallet changer New 22-tool magazine and jig area enlargement contribute to further improvement of production efficiency.

Compact Machining Center

with Pallet Changer

2-face pallet changer and 22-toolmagazine promoting process integration

Tool - Tool：

Chip - Chip：0.9S

1.7S

Palletchange time

2.9S＊When the loading capacity is 120 kg （one face）

Tool - Tool ：

Chip - Chip ：0.9S

1.4S

Compact Machining Center

Innovative machine that incorporates turning

Turning diameter

Max.1,100mm

Jig height

Max.350mm

Loading capacity

Max.200kg

R450X1Process 1 Process 2 Pallet 1

Pallet 2

● Turning center + Machining center ● M140X1

Process 1

Process 2

Multi-tasking machine encapsulatinghigh-productivity technologiesNew choice for process integration that achievesmore efficient mass-production parts machining

7 8

Machine Specifications

Item

X axis

Y axis

Z axis

A axis

C axis

Work area size

Shape of table top

Table position time

Speed during tapping

Tapered hole

BT dual contact system（BIG-PLUS）

Coolant ThroughSpindle（CTS）

Max. spindle speed

Cutting feed rate

Indexing feedrate（A and C）

Tool shank type

Pull stad type　＊4

Tool storage capacity

Max. tool length

Max. tool diameter

Max. tool weight　＊1

Tool selection method

Tool To Tool

Chip To Chip

Cut To Cut

CNC-C00

200（7.9）

440（17.3）

305（12.0）

5 ～ −95

360

100 ～ 405（3.9 ～ 15.9）

D140（D5.5）

In compliance with table nose No.5 of ISO702-4（JISB6109-2）

40（88.2）

0.32（1093）

—

MAX. 6,000

7/24 tapered No.30

—

Optional

2,000

50 × 50 × 50（1,969 × 1,969 × 1,969）

X,Y axis ： 1 ～ 10,000（0.04 ～ 394）　Z axis ： 1 ～ 20,000（0.04 ～ 787）

A axis ： 60　C axis ： 200

MAS-BT30

MAS-P30T-2

22

200（7.9）

80（3.1）

3（6.6）

Random shortcut method

0.9

1.4

—

mm（inch）

mm（inch）

mm（inch）

（deg.）

（deg.）

mm（inch）

mm（inch）

kg（lbs）

kg・m2（lb・inch2）

sec.

min-1

min-1

m/min（inch/min）

m/min（inch/min）

min-1

pcs.

mm（inch）

mm（inch）

kg（lbs）

sec.

sec.

sec.

CNC-C00

450（17.7）

320（12.6）

305（12.0）

—

—

200～505（7.9～19.9）［250～555（9.8～21.9）］

One face 600×300（23.6×11.8）

—

One face 120（265）［200（441）］

—

2.9

MAX. 6,000

7/24 tapered No.30

Optional

Optional

—

50 × 50 × 50（1,969 × 1,969 × 1,969）

X,Y,Z axis ： 1～30,000（0.04～ 1,181）

—

MAS-BT30

MAS-P30T-2

14／22

200（7.9）

80（3.1）

3.0（6.6）〈total tool weight : 25（55.1）for 14 tools, 40（88.2）for 22 tools 〉

Random shortcut method

0.8／0.9（14 tool / 22 tool）

1.6／1.7（14 tool / 22 tool）

1.3／1.4（14 tool / 22 tool）

10,000min-1 specifications ： 10～10,00016,000min-1 specifications（Optional） ： 16～16,000

10,000min-1 high-torque specifications（Optional） ： 10～10,000

10,000min-1 specifications ： 10.1／6.716,000min-1 specifications（Optional） ： 7.4／4.9

10,000min-1 high-torque specifications（Optional） ： 12.8／8.8

10,000min-1 specifications ： 9.516,000min-1 specifications（Optional） ： 9.5

10,000min-1 high-torque specifications（Optional） ： 10.4

10,000min-1 specifications ： 9.516,000min-1 specifications（Optional） ： 9.5

Instruction Manual（1 set）, anchor bolts（4 pcs.）, leveling bolts（4 pcs.）

10,000min-1 specifications ： 10～10,00016,000min-1 specifications（Optional） ： 16～16,000

10,000min-1 specifications ： 10.1／6.716,000min-1 specifications（Optional） ： 7.4／4.9

Distance between table topand spindle nose end

X,Y axis ： 1.0　Z axis ： 1.8

—

AC V±10％、50/60Hz±1Hz

0.4～0.6（recommended value : 0.5MPa）

50

2,588（101.9）

1,400×2,654 ［3,344］（55.1×104.5［131.7］）

2,700（5,954）

Maximum tableload inertia

Required flow

Axis feed motor

Turning spindle motor

Power supply

Height

Weight

0.006～0.020（0.00024～0.00079）

Less than 0.004（0.00016）

X、Y axis ： 1.0　Z axis ： 1.8　A axis ： 1.8

4.2

AC V±10％, 50/60Hz±1Hz

0.4～0.6（recommended value : 0.5MPa）

130

2513（98.9）

1,280 × 3,641（50.4 × 144.7）［including chip conveyor］

2,370（5,226）

X、Y、Z axis ： 0.006～0.020（0.00024～0.00079）A、C axis ： 28 sec or less

X、Y、Z axis ： Less than 0.004（0.00016）A、C axis ： 16 sec or less

min-1

Turningspindle

　＊7

　＊8

　＊6

　＊11

　＊9

　＊10 　＊10

CNC Unit

Table

Spindle

Feed rate

Electricmotor

ATC unit

Tool changetime

Travels

Standard accessories

Accuracy

Powersource

Machiningdimensions

Max.loading capacity（uniform load）

Spindle speed

Repeatability ofbidirectional axis positioning（ISO230-2 ： 2006）

Accuracy of bidirectionalaxis positioning（ISO230-2 ： 2006）

Main spindle motor（10min/continuous）

Airsupply

Power capacity（continuous）

Regularair pressure

kW

kVA

mm（inch）

mm（inch）

　＊2

　＊5

　＊3

＊1／Actual tool weight differs depending on the configuration and center of gravity.The figures shown here are for reference only. ＊2／Spindle motor output differs depending on the spindle speed.＊3／Measured in compliance with ISO standards and Brother standards.Please contact Brother for details.　＊4／Brother specifications apply to the pull studs for CTS.　＊5／Measured in compliance with JIS B6336-9 and MAS011-1987.　＊6／Can be increased up to 200 kg （one face） by changing the parameter. Please consult us separately.　＊7／When using the hydraulic rotary joint, the Y-axis travel becomes 290 mm.　＊8／Values when the low-floor table is selected　＊9／When using high accuracy mode B.　＊10／Regular air pressure varies depending on the machine specifications, machining program details, or use of peripheral equipment. Set the pressure higher than the recommended value　＊11／When table loading on one face is 120kg

kW

kW

MPa

L/min

mm（inch）

mm（inch）

kg（lbs）

Item

Machine Specifications

＊1／Actual tool weight differs depending on the configuration and center of gravity.The figures shown here are for reference only.　＊2／Spindle motor output differs depending on the spindle speed.＊3／Measured in compliance with ISO standards and Brother standards.　＊4／Brother specifications apply to the pull studs for CTS.　＊5／Measured in compliance with JIS B6336-9 and MAS011-1987.＊6／Acceleration must be adjusted for X and Y axes.　＊7／When using high accuracy mode B.　＊8／Regular air pressure varies depending on the machine specifications, machining program details, or use of peripheral equipment. Set the pressure higher than the recommended value.

CNC Unit

Table

Spindle

Feed rate

Electricmotor

ATC unit

Tool changetime

Travels

mm（inch）

mm（inch）

mm（inch）

mm（inch）

mm（inch）

kg（lbs）

min-1

m/min（inch/min）

mm/min（inch/min）

pcs.

mm（inch）

mm（inch）

kg（lbs）

sec.

sec.

sec.

kW

MPa

L/min

mm（inch）

mm（inch）

kg（lbs）

X axis

Y axis

Z axis

Work area size

Speed during tapping

Tapered hole

BT dual contact system（BIG-PLUS）

Coolant Through Spindle（CTS）

Cutting feed rate

Tool shank type

Pull stad type　＊4

Tool storage capacity

Max. tool length

Max. tool diameter

Max. tool weight　＊1

Tool selection method

Tool To Tool

Chip To Chip

Cut To Cut

Axis feed motor

Power supply

Height

Weight

CNC-C00

500（19.7）

400（15.7）

300（11.8）

180～480（7.1～18.9）

250［300 ＊6］（551［661 ＊6］）

10,000min-1 specifications ： 10～10,000　　16,000min-1 specifications（Optional） ： 16～16,000

10,000min-1 high-torque specifications（Optional） ： 10～10,000　　27,000min-1 specifications（Optional） ： 27～27,000

MAX. 6,000（27,000min-1 specifications ： MAX. 8,000）

7/24 tapered No.30

Optional

Optional（CTS option is not available for 27,000min-1 spec.）

50 × 50 × 56（1,969 × 1,969 × 2,205）

X、Y、Z axis ： 1～30,000（0.04～1,181）

MAS-BT30

MAS-P30T-2

14／21

110（4.3）

3.0（6.6）／Tool〈TOTAL TOOL WEIGHT ： 25（55.1） for 14 tools,35（77.2） for 21 tools〉

Random shortcut method

0.8

1.4

1.2

10,000min-1 specifications ： 10.1／6.7　　16,000min-1 specifications（Optional） ： 7.4／4.9

10,000min-1 high-torque specifications（Optional） ： 12.8／8.8　　27,000min-1 specifications（Optional） ： 8.9／6.3

X、Y axis ： 1.0　Z axis ： 2.0

AC V±10％、50/60Hz±1Hz

10,000min-1 specifications ： 9.5　　16,000min-1 specifications（Optional） ： 9.5

10,000min-1 high-torque specifications（Optional） ： 10.4　　27,000min-1 specifications（Optional） ： 9.5

0.4～0.6（recommended value : 0.5MPa ＊8）

45（27,000min-1 specifications ： 115）

2,497（98.3）

1,560 × 2,220［2,692］（61.4 × 87.4［106.0］）

2,250（4,960）

2doors

800×400（31.4×15.7） 600×400（23.4×15.7）

300（11.8）700（27.6）

2,050 × 2,220［2,692］（80.7 × 87.4［106.0］）

2,400（5,291）

1,080 × 2,557［2,776］（42.5 × 100.7［109.3］）

2,200（4,850）

250（9.8） 160（6.3）［21 tool］　250（9.8）［14 tool］

Instruction Manual（1 set）、 anchor bolts（4 pcs.）、 leveling bolts（4 pcs.）、 machine cover（manual door）Standard accessories

Front door

Accuracy

Powersource

Machiningdimensions

Airsupply

Distance between table topand spindle nose end

Max.loading capacity（uniform load）

Spindle speed

Rapid traverse rate（XYZ-area）

Main spindle motor（10min/continuous）

Power capacity（continuous）

Regularair pressure

Repeatability ofbidirectional axis positioning（ISO230-2 ： 2006）

Accuracy of bidirectionalaxis positioning（ISO230-2 ： 2006）

Required floor space［with control unit door open］

0.006～0.020（0.00024～0.00079）

Less than 0.004（0.00016）

min-1

kW

kVA

mm（inch）

mm（inch）

Required flow

＊5

＊2

＊3

＊7

Rapid traverse rate（XYZ-area）

Required floor space［with control unit door open］

9 10

Installation options Standard function

Option list

BT dual contact system（BIG-PLUS）

Coolant Through Spindle（CTS）

Back washing system（for CTS）

Tool washing（air-assisted type）

Tool breakage detector（touch type）

Chip shower

Hydraulic rotary joint（4P） + Pneumatic relay box（12P）

Pneumatic relay box（12P）

Rotary joint（4P）

Cleaning gun

Jig shower valve unit

Automatic oil lubricator

Automatic grease lubricator

LED type work light（1or 2 lamps）

Table light（LED type）

LED type indicator light（1,2, or 3 lamps）

Automatic door（motor-driven）

Area sensor

Specified color

Manual pulse generator

B-axis cord（1 axis, 2 axes）

B axis cord

Spindle override

High column（150mm, 250mm）

Outside index rotation switch

Turning diameter enlargement（D1,100mm）

Low-floor table

Grip cover

Top cover

Side cover（transparent board type）

Side door（with transparent window）

Mesh basket for chips

RS232C（25 pin）for control box

Expansion I/O board（EXIO board）　EXIO board assembly, Additional EXIO board assembly

Switch panel（6 holes, 10 holes）

Memory expansion（approx. 500 Mbytes）

High accurancy mode BⅡ（look-ahead 200 blocks, smooth pass offset）

Submicron command

Interrupt type macro

Fieldbus　CC-Link（remote device station）, PROFIBUS DP（slave）, DeviceNet（slave）

PLC programming software（for Windows XP, Vista, and 7）

Two-step chip conveyor

Coolant tank with chute

Coolant unit

Coolant unit

Coolant unit 50L with valve and 180W pump

100L with valve and 250W pump

with chip shower, valve and 250W + 250W pumps

150L with chip shower, valve and 250W + 400W pumps

with chip shower, CTS, valve and 250W + 400W + 650W pumps

＊1／CTS option is not available for 27,000min-1 specifications. ＊2／250 mm high column is not available for S300X1 21 ATC specifications. ＊3／Windows is a trademark or registered trademark of Microsoft Corporation in the UnitedStates and/or other countries. ＊4／Standardly equipped with R450X1 22 tool magazine model.

＊1 ＊1 ＊1

＊2

＊4

＊4

＊3

S700X1 / S500X1 / S300X1

ADC Cast iron Carbon steel ADC Cast iron Carbon steel ADC Cast iron Carbon steel

10,000min-1

10,000min-1

high-torque

16,000min-1

27,000min-1

Machining capability

R450X1

10,000min-1

10,000min-1

high-torque

16,000min-1

Drilling Tapping Facing

Tool diameter mm（inch）×Feed mm（inch）/rev

Tool diameter mm（inch）× Pitch mm（inch）

Cutting amount cm3/min（inch3/min）: Cutting width mm（inch）×Cutting depth mm（inch）×Feed rate mm/min（inch/min）

＊The data is Brother’s actual test data.

ADC Cast iron Carbon steel ADC Cast iron Carbon steel ADC Cast iron Carbon steel

D32×0.2（1.26×0.008）

D28×0.15（1.1×0.006）

D25×0.1（0.98×0.004）

D40×0.2（1.57×0.008）

D30×0.7（1.18×0.03）

D34×0.15（1.34×0.006）

D26×0.4（1.02×0.02）

D30× 0.15（1.18×0.006）

D26× 0.25（1.02×0.01）

D24×0.2（0.94×0.008）

D22×0.15（0.87×0.006）

D18×0.1（0.71×0.004）

D20×0.2（0.79×0.008）

D19×0.15（0.75×0.006）

D17×0.1（0.67×0.004）

M27× 3.0（1-8UNC）

M24× 3.0（7/8-9UNC）

M16×2.0（5/8-11UNC）

M39×4.0（1 1/2-6UNC）

M33×3.5（1 1/4-7UNC）

M27×3.0（1-8UNC）

M22×2.5（7/8-9UNC）

M18×2.5（5/8-11UNC）

M14×2.0（1/2-13UNC）

M22×2.5（7/8-9UNC）

M18×2.5（5/8-11UNC）

M12×1.75（7/16-14UNC）

960 ： 100×3.2×3,000（58.6 ： 3.94×0.13×118.1）

137 ： 40×6.0×573（8.4 ： 1.57×0.24×22.6）

100 ： 40 × 5.2 × 484（6.1 ： 1.57×0.2×19.1）

1,700 ： 100× 5.7×3,000（102.4 ： 3.94×0.22×118.1）

137 ： 40×6.0×573（8.4 ： 1.57×0.24×22.6）

100 ： 40 × 5.2 × 484（6.1 ： 1.57×0.2×19.1）

660 ： 100×2.2×3,000（40.3 ： 3.94×0.09×118.1）

73 ： 40×3.2×573（4.5 ： 1.57×0.13×22.6）

48 ： 40 × 2.5 × 484（2.9 ： 1.57×0.1×19.1）

600 ： 100×2.0×3,000（36.6 ： 3.94×0.08×118.1）

45 ： 40×2.0×573（2.7 ： 1.57×0.08×22.6）

24 ： 40 × 1.2 × 484（1.5 ： 1.57×0.05×19.1）

D32×0.2（1.26×0.008）

D28×0.15（1.1×0.006）

D25×0.1（0.98×0.004）

D40×0.2（1.57×0.008）

D30×0.7（1.18×0.03）

D34×0.15（1.34×0.006）

D26×0.4（1.02×0.02）

D30× 0.15（1.18×0.006）

D26× 0.25（1.02×0.01）

D24×0.2（0.94×0.008）

D22×0.15（0.87×0.006）

D18×0.1（0.71×0.004）

M27× 3.0（1-8UNC）

M24× 3.0（7/8-9UNC）

M16×2.0（5/8-11UNC）

M39×4.0（1 1/2-6UNC）

M33×3.5（1 1/4-7UNC）

M27×3.0（1-8UNC）

M22×2.5（7/8-9UNC）

M18×2.5（5/8-11UNC）

M14×2.0（1/2-13UNC）

960 ： 100×3.2×3,000（58.6 ： 3.94×0.13×118.1）

128 ： 40×5.6×573（7.8 ： 1.57×0.22×22.6）

81 ： 40 × 4.2 × 484（5.0 ： 1.57×0.17×19.1）

1,700 ： 100× 5.7×3,000（102.4 ： 3.94×0.22×118.1）

128 ： 40×5.6×573（7.8 ： 1.57×0.22×22.6）

81 ： 40 × 4.2 × 484（5.0 ： 1.57×0.17×19.1）

660 ： 100×2.2×3,000（40.3 ： 3.94×0.09×118.1）

73 ： 40×3.2×573（4.5 ： 1.57×0.13×22.6）

48 ： 40 × 2.5 × 484（2.9 ： 1.57×0.1×19.1）

NC unit specificationsCNC model

Control axes

M140X1 ： NC language　＊Conversation language not available.

Simultaneouslycontrolled axes

● Absolute / incremental● Inch / metric● Corner C / Corner R● Rotational transformation● Synchronized tap● Coordinate system setting● Dry run● Restart● Backlash compensation● Pitch error compensation● Rapid traverse override● Cutting feed override● Alarm history（1,000 pieces）● Startus log● Machine lock● Computer remote● Built-in PLC● Motor insulation resistance measurement

（Conversation）● Operation program● Schedule program● Automatic tool selection● Automatic cutting condition setting● Autmatic tool length compensation setting● Autmatic cutter compensation setting● Autmatic calculation of unknown number input● Machining order control

（Turning function）● Constant peripheral speed control● Feed per revolution control● Tool position compensation XYZ● Nose R compensation

Standard NC functions Optional NC functions

＊2

＊5

＊5

＊3

● Operation log● High-accuracy mode AⅢ● Tool length measurement● Tool life management / spare tool● Background editing● Graphic display● Subprogram● Herical / conical interpolation● Servomotor off standby mode （energy saving function）● Chip shower off delay● Tap return function● Automatic work light off（energy saving function）● Automatic workpiece measurement　＊1

● Heat expansion compensation systemⅡ　 （X,Y,Z axes）● Automatic power off（energy saving function）● Automatic coolant off（energy saving function）● Tool washing filter with filter clogging detection

● Waveform display● Operation level● External input signal key● High accuracy mode BⅠ　 （look-ahead 30blocks）

（NC）● Expanded workpice coordinate system● Scaling● Mirror image● Menu programming● Program compensation● Tool length compensation● Cutter compensation● Macro function● Local coordinate system● One-way positioning● Opeation in tape mode

● Memory expansion（Approx. 500 Mbytes）● Spindle override● High accuracy mode BⅡ　（look-ahead 200 blocks, smooth path offset）

（NC）● Submicron command　＊4

● Interrupt type macro

＊1／ Measuring instrument needs to be prepared by users.＊2／Conversation language not available for M140X1＊3／M140X1 only＊4／When the submicron command is used,changing to the conversation program is disabled.＊5／Minute block processing time can be changed. As there are some restrictions, please contact your local distributor for details.＊Functions listed under（NC）and（Conversation）are available only for NC programs and conversation programs respectively.

＊When program size is bigger than 2 Mbytes, machine works with extended memory operation.　＊Ethernet is a trademark or registered trademark of XEROX in the United States.

Least input increment

Max.programmable dimension

Display

Memory capacity

External communication

No.of registrable programs

Program format

0.001mm, 0.0001inch, 0.001 deg.

±9999.999mm, ±999.9999inch

12.1-inch color LCD

Approx.100 Mbytes（Total capacity of program and data bank）

USB memory interface, Ethernet, RS232C（Optional）

4,000（Total capacity of program and data bank）

CNC-C00

S700X1、S500X1、S300X1 ： 5 axes（X,Y,Z two additional axes）

R450X1 ： 7 axes（X,Y,Z 4 additional axes）

M140X1 ： 5 axes（X,Y,Z,A,C）

Positioning 5 axes（X,Y,Z,A,B）

M140X1 ： 5 axes（X,Y,Z,A,C）

Linear ： 4 axes（X,Y,Z one additional axis）

M140X1 ： 4 axes（X,Y,Z,C）

Circular ： 2 axes　Helical/conical ： 3 axes（X,Y,Z）

Interpolation NC language, conversation（changed by parameter）, conversionfrom conversation program to NC laguage program available

NC unit specificationsStandard NC functionsMachining capability

1211

①CVT intermediate housing

②Clutch case

③Cylinder head cover

④Cylinder brock

⑤EPS housing

⑥Throttle body

⑦Alternator

⑧Starter housing

⑨Flywheel

⑩AT transmission case

⑪Crankcase

⑫Cylinder head

⑯Mobile phone⑰Personal computer case⑱HDD parts

⑲Watch parts⑳Camera parts㉑Medical implants

⑬Brake master cylinder

⑭Shiftfork

⑮Camshaft

■Automotive and motorcycle parts ■ Information Technology and　General machinery parts

① ② ③ ④ ⑤

⑥ ⑦ ⑧ ⑨ ⑩

⑮⑪

⑯ ⑰ ⑱ ⑲ ⑳ ㉑

⑫ ⑬ ⑭

Compact, high productivity machine enabling nonstop small parts machining ● Slim body, equipped with a QT table● Enhanced machining capabilities through improved rigidity, in spite of the compact body● Equipped with an 26-tool magazine to handle various types of machining

High-end table traverse model suitablefor machining large workpieces● Largest machining area among Tapping Centers●Highly accurate large boring achieved by improved machine rigidity and rigidity balance● The machining room is separated from the tool stocker, reducing problems caused by chips.

#15 spindle model ideal for machiningsmall precision parts

●High productivity achieved by the fastest spindle speed and shortest ATC time among Tapping Centers● Super space-saving machine at a size of 0.9 m x 1.7 m●Highest environmental performance in its class

High-end column traversemachine applicable to awide range of machining

● Equipped with a 26- or 40-tool magazine, enabling expansion of target workpieces●　 type : Uses a large QT table*, which enables large workpiece machining or multiple parts machining●　 type : Uses a large fixed table where large jigs can be loaded● Improved chip discharge efficiency using the center trough structure and chip conveyor （optional）

TC-22B TC-31B

TC-20B

QT FT

QT

FT

TC-32BN

●For safe use of our products, please read the Instruction Manual and Safety Manual before commencing operation. When using oil-based coolant oil or machining workpieces made of materials that may ignite （e.g. magnesium, resin）, take sufficient safety measures to prevent fire. Please consult our sales personnel if you have any questions.●When exporting this product, be sure to check the end user and their purpose of use from a security viewpoint. Approval from regulatory authorities may be required prior to export due to revision of laws and regulations or other

reasons. Please check with us before exporting the product. ●Secure 700 mm between machines as maintenance space. ●When exporting this product with the compound rotary table, the Ministry of Economy, Trade and Industry has deemed this export item to be “applicable listed items”. Please obtain required export permissions from the Ministry of

Economy, Trade and Industry prior to export.＊QT table : Original high-speed 2-face pallet changer

Brother’s machine tools improve production efficiency in a broad range of mass-production parts machining.

Examples of target workpieces

e

13 14

TC-32BN TC-32BN TC-31BQT FTTC-22BItem ItemTC-22B-O TC-20B

Machine Specifications Machine Specifications

CNC-B00

550（21.7）

400（15.7）

415（16.3）

7/24 taperd #30

Optional

70 × 70 × 70（2,756 × 2,756 × 2,756）

X,Y,Z axis ： 1～20,000（0.04～787）

MAS-BT30

MAS-P30T-2

26（＋1）/40（＋1）

200（7.9）

Double arm method（random shortcut path）

0.9

2.0

X,Y,Z axis ： 1.3

AC200V±10%、50/60Hz±1Hz

0.4～0.6

120

2,360（92.9）

0.005/300（0.0002/11.8）

±0.003（±0.00012）

CNC-B00

350（13.8）

250（9.8）

350（13.8）（Including ATC80（3.15））

200～550（7.9～21.7）

500 × 270（19.7 × 10.6）〈one side〉

80（179）〈one side〉

2.3/180°

7/24 taperd #30

Ootional

50 × 50 × 50（1,969 × 1,969 × 1,969）

X,Y,Z axis ： 1～20,000（0.04～787）

MAS-BT30

MAS-P30T-2

26（＋1）

200（7.9）

Double arm method（random shortcut path）

0.7

1.7

X,Y,Z axis ： 1.5

AC200V±10%、50/60Hz±1Hz

0.4～0.6

100

2,283（89.9）

1,404 × ［3,204］（55.2 ×［126.1］）

2,300（5,071）

0.005/300（0.0002/11.8）

±0.003（±0.00012）

645（25.4）

600 × 425（23.6 × 16.7）〈one side〉

200（441）〈one side〉

3.4/180°

（standard）645（25.4）,（low）865（34.1）

800 × 400（31.5 × 15.4）

600（1,323）

—

12,000min-1 specifications ： 12～12,00016,000min-1 specifications（Optional） ： 16～16,000

16,000min-1 specifications ： 16～16,00022,000min-1 specifications（Optional） ： 22～22,000

16,000min-1 specifications ： MAX.6,00022,000min-1 specifications（Optional） ： MAX.8,000

16,000min-1 specifications ： 7.4/4.922,000min-1 specifications（Optional） ： 11.2/6.4

16,000min-1 specifications ： 9.522,000min-1 specifications（Optional） ： 9.5

12,000min-1 specifications ： 11/616,000min-1 specifications（Optional） ： 10/7.3

12,000min-1 specifications ： 14.516,000min-1 specifications（Optional） ： 15.0

0～30（0～1.2）/D46（1.8）　30～200（1.2～7.9）/D55（2.2）（Max.tool diameter D125（4.9））

3.5（7.7）〈total weight : 55（121.2）/26〉〈total weight : 80（176.3）/40〉

1,890 × ［3,669］（74.4 ×［144.4］）

4,600（10,143）

1,890 × ［3,103］（74.4 ×［122.2］）

4,400（9,702）

Instruction Manual（1 set）, anchor bolts（4 pcs.）, leveling bolts（4 pcs.）, splash guard（manual door）, fuse（1set）

0～30（0～1.2）/D46（1.8）　30～200（1.2～7.9）/D55（2.2）（Max.tool diameter D125（4.9））

3.5（7.7）〈total weight : 55（121.3）〉

MAX.8,000

　＊9

　＊9

　＊9

　＊10

　＊10

＊1／Brother spec. is applied to pull stud for CTS. ＊2／When all tools are small tools （D55mm or less）. ＊3／The tool storage capacity, tool change time, etc., will vary when using large tools. The tool change time varies depending on the spindle type. ＊4／Actual tool weight varies according to the configuration and center of gravity; The figures shown here are for reference only. ＊5／Spindle motor output differs depending on the spindle speed. ＊6／These include 0.9 KVA for chip conveyor and 4.2 KVA for high-pressure coolant. ＊7／The required flow rate listed is the total flow rate when using the spindle air blast and coolant valve. ＊8／Measured in compliance with JIS B6201-1987 and Brother standards. Please contact Brother for details. ＊9／Please contact Brother for details of HSK and NC5 types. ＊10／This is value of BT spec. ＊11／Tool change time measurement method is based on JIS B6336-9 and MAS011-1987.

Table

Spindle

Feed rate

Electricmotor

ATC unit

Tool changetime

Powersource

Machiningdimensions

kW

kVA

Speed during tapping

Distance from taper gauge line/Max. tool diameter

Max. tool weight　＊4 kg（lbs）

mm（inch）

Standard accessories

CNC Unit

Travels

mm（inch）

mm（inch）

mm（inch）

mm（inch）

mm（inch）

kg（lbs）

sec.

m/min（inch/min）

mm/min（inch/min）

pcs.

mm（inch）

sec.

sec.

kW

MPa

L/min

mm（inch）

mm（inch）

kg（lbs）

mm（inch）

mm（inch）

X axis

Y axis

Z axis

Work area size

Table position time

Tapered hole

Coolant Through Spindle（CTS）

Cutting feed rate

Tool shank type

Pull stad type　＊1

Tool storage capacity　＊2

Max. tool length

Tool selection method

Tool To Tool

Chip To Chip

Axis feed motor

Power supply

Machine Height

Machine Weight

Positioning accuracy

Repeatability

Airsupply

Distance between table topand spindle nose end

Max.loading capacity（uniform load）

Spindle speed

Rapid traverse rate（XYZ-area）

Main spindle motor（10min/continuous）

Power capacity（continuous）

Regularair pressure

Required floor space［with control unit door open］

min-1

min-1

Required flow　＊7

＊5

Accuracy＊8

＊6

＊8

＊11

＊3

CNC-B00

450（17.7）

410（16.1）

250（551）［300（661） ＊9］

—

7/24 taperd #30

Optional

70 × 70 × 70（2,756 × 2,756 × 2,756）

X,Y,Z axis ： 1～20,000（0.04～787）

MAS-BT30

MAS-P30T-2

18（＋1）/27（＋1）

250（9.8）

Double arm method（random shortcut path）

0.9

2.4

X,Y,Z axis ： 1.3

AC200V±10%、50/60Hz±1Hz

0.4～0.6

180

2,538（99.9）

0.005/300（0.0002/11.8）

±0.003（±0.00012）

CNC-B00

200（7.9）

185（7.3）［＋70（2.8）］

250（9.8）

120～370（4.7～14.6）

400 × 200（15.7 × 7.9）

70（154）

—

7/24 taperd #15

—

40 × 40 × 45（1,575 × 1,575 × 1,772）

X,Y axis ： 1～10,000（0.04～394）　Z axis ： 1～20,000（0.04～787）

JBS4002～15T

JBS4002～15P（45°）special

15（＋1）

—

Double arm method（random shortcut path）

0.6（0.4 ＊11）

1.3（1.1 ＊11）

X,Y axis ： 0.3　Z axis ： 1.0

AC200V±10%、50/60Hz±1Hz

0.4～0.6

70

1,955（77.0）

900 × 1,717［2,238］（35.4 × 67.6［88.1］）

1,200（2,646）

0.005（0.0002）/full stroke

±0.002（±0.00008）

500（19.7）

250～660（9.8～26.0）

650 × 450（25.6 × 17.7）

700（27.6）

230～640（9.1～25.2）

850 × 450（33.5 × 17.7）

12,000min-1 specifications ： 12～12,00016,000min-1 specifications（Optional） ： 16～16,000

0～30（0～1.2）/D46（1.8）　30～250（1.2～9.8）/D55（2.2）（Max.tool diameter D125（4.9））

12,000min-1 specifications ： 11/616,000min-1 specifications（Optional） ： 10/7.3

12,000min-1 specifications ： 14.516,000min-1 specifications（Optional） ： 15.2

3.5（7.7）

1,496 × ［3,102］（58.9 × ［122.1］）

2,780（6,129）

1,870 × ［3,102］（73.6 × ［122.1］）

2,910（6,416）

0.4（0.9）〈total weight : 3.0（6.6）〉

0～100（0～3.9）/D30（1.2）

30,000min-1 specifications ： 30～30,000

30,000min-1 specifications ： 5.2

30,000min-1 specifications ： 3.2/2.7

＊1／Brother spec. is applied to pull stud for CTS. ＊2／When all tools are small tools （D55mm or less）. ＊3／The tool storage capacity, tool change time, etc., will vary when using large tools. The tool change time varies depending on the spindle type. ＊4／Actual tool weight varies according to the configuration and center of gravity; The figures shown here are for reference only. ＊5／Spindle motor output differs depending on the spindle speed. ＊6／These include 0.9 KVA for chip conveyor and 4.2 KVA for high-pressure coolant. ＊7／The required flow rate listed is the total flow rate when using the spindle air blast and coolant valve. ＊8／Measured in compliance with JIS B6201-1987 and Brother standards. Please contact Brother for details. ＊9／Acceleration must be adjusted for X and Y axes. ＊10／Tool change time measurement method is based on JIS B6336-9 and MAS011-1987. ＊11／Time when small tool is set.

Instruction Manual（1 set）, anchor bolts（4 pcs.）, leveling bolts（4 pcs.）, splash guard（manual door）, fuse（1set）

MAX.8,000 MAX.10,000

Table

Spindle

Feed rate

Electricmotor

ATC unit

Tool changetime

Powersource

Machiningdimensions

kW

kVA

Speed during tapping

Distance from taper gauge line/Max. tool diameter

Max. tool weight　＊4 kg（lbs）

mm（inch）

Standard accessories

Accuracy

CNC Unit

Travels

mm（inch）

mm（inch）

mm（inch）

mm（inch）

mm（inch）

kg（lbs）

sec.

m/min（inch/min）

mm/min（inch/min）

pcs.

mm（inch）

sec.

sec.

kW

MPa

L/min

mm（inch）

mm（inch）

kg（lbs）

mm（inch）

mm（inch）

X axis

Y axis

Z axis

Work area size

Table position time

Tapered hole

Coolant Through Spindle（CTS）

Cutting feed rate

Tool shank type

Pull stad type　＊1

Tool storage capacity　＊2

Max. tool length

Tool selection method

Tool To Tool

Chip To Chip

Axis feed motor

Power supply

Machine Height

Machine Weight

Positioning accuracy

Repeatability

Airsupply

Distance between table topand spindle nose end

Max.loading capacity（uniform load）

Spindle speed

Rapid traverse rate（XYZ-area）

Main spindle motor（10min/continuous）

Power capacity（continuous）

Regularair pressure

Required floor space［with control unit door open］

min-1

min-1

Required flow　＊7

＊3

＊10

＊5

＊6

＊8

15 16

TC-20BTC-22BTC-22B-O

TC-32BN TC-31BQTTC-32BN

FT

Installation options Standard function

Option list

（6holes,10holes）（10holes） （8holes） （9holes） （8holes）

Coolant through spindle（CTS）

Cleaning gun

Manual pulse generator

Automatic door

Area sensor for automatic door

Work light （one lamp）

（two lamps）

Table light

Indicator light（one lamp,two lamps,three lamps）

Tool breakage detector

Automatic lubricator

Grease lubricator（manual）

High column spacer（150mm/5.9inch）

Top cover

Side cover（transparent board type）

Side door

NC high-speed index table（Hollow type）

Rotary joint

B axis cord（1 axis, 2 axes）

B-axis connection unit

Tool washing

Jig shower

Specified color

Additional I/O board

Automatic heat expansion compensation system,Ⅱ（X,Y,Z axis）

Helical / conical interpolation

Automatic workpiece measurement software

Expantion memory（Approx.120 Mbytes）

Spindle override

Outer index switch

Floppy disk drive unit

USB interface

RS232C 9-pin to 25-pin conversion（on control board）

Manual tool unclamp unit

Magazine turn switch

Built-in PLC（PLC function, ladder editing,extension I/O board）

PLC programming software Windows® 2000, XP, VISTA

Switch panel

Spindle air blast cleaning and air purge are standard equipped for all models. ＊1／High pressure specifications for TC-32BN and TC-22B ＊2／A 25-pin connector is provided on the operation panel. ＊3／Windows is a trademark or registered trademark of Microsoft Corporation in the United States and/or other countries.

Coolant unit 50L with valve and 180W pump

with chip shower, valve and 180W

100L with chip shower, valve and 250W + 250W pumps

150L with chip shower, valve and 250W + 400W pumps

with chip shower, CTS, valve and 250W + 400W + 650W pumps

250L with chip shower, valve and 250W + 400W pumps

250L with valve and 250W + 400W pumps

with chip shower, valve and 250W + 400W pumpsチップコンベア装置

Coolant tankwith chute

＊3

（Ⅱ）

＊2

＊1

16,000min-1

22,000min-1

TC-31B

ADC Cast iron Carbon steel ADC Cast iron Carbon steel ADC Cast iron Carbon steel

＊The data is Brother’s actual test data.

ADC Cast iron Carbon steel ADC Cast iron Carbon steel ADC Cast iron Carbon steel

TC-32BN

12,000min-1

16,000min-1

TC-20B

ADC Brass Carbon steel ADC Brass Carbon steel ADC Brass Carbon steel

30,000min-1

TC-22B / 22B-O

ADC Cast iron Carbon steel ADC Cast iron Carbon steel ADC Cast iron Carbon steel

12,000min-1

16,000min-1

QT FT

Machining capability

Drilling Tapping Facing

Tool diameter mm（inch）×Feed mm（inch）/rev

Tool diameter mm（inch）× Pitch mm（inch）

Cutting amount cm3/min（inch3/min）: Cutting width mm（inch）×Cutting depth mm（inch）×Feed rate mm/min（inch/min）

D34×0.2（1.34×0.008）

D28×0.15（1.1×0.006）

D25×0.1（0.98×0.004）

M27×3.0（1-8UNC）

M27×3.0（1-8UNC）

M20×2.5（3/4-10UNC）

1,440 ： 100×4.8×3,000（87.9 ： 3.94×0.19×118.1）

160 ： 40×7.0×573（9.8 ： 1.57×0.28×22.6）

116 ： 40×6.0×484（7.1 ： 1.57×0.24×19.1）

D8×0.2（0.31×0.008）

D8×0.2（0.31×0.008）

D5×0.15（0.20×0.006）

M8×1.25（5/16-18UNC）

M8×1.25（5/16-18UNC）

M5×0.8（10-24UNC）

32 ： 16×1.0×2,000（2.0 ： 0.62×0.039×78.7）

32 ： 16×1.0×2,000（2.0 ： 0.62×0.039×78.7） ̶

D34×0.2（1.34×0.008）

D28×0.15（1.1×0.006）

D25×0.1（0.98×0.004）

M27×3.0（1-8UNC）

M27×3.0（1-8UNC）

M20×2.5（3/4-10UNC）

1,440 ： 100×4.8×3,000（87.9 ： 3.94×0.19×118.1）

160 ： 40×7.0×573（9.8 ： 1.57×0.28×22.6）

116 ： 40×6.0×484（7.1 ： 1.57×0.24×19.1）

D24×0.2（0.94×0.008）

D22×0.15（0.87×0.006）

D18×0.1（0.71×0.004）

M22×2.5（7/8-9UNC）

M18×2.5（5/8-11UNC）

M14×2.0（1/2-13UNC）

660:100×2.2×3,000（40.3 ： 3.94×0.09×118.1）

73:40×3.2×573（4.5 ： 1.57×0.13×22.6）

48:40×2.5×484（2.9 ： 1.57×0.1×19.1）

D22×0.2（0.87×0.008）

D20×0.15（0.79×0.006）

D18×0.1（0.71×0.004）

M16×2.0（5/8-11UNC）

M14×2.0（1/2-13UNC）

M12×1.75（7/16-14UNC）

450:100×1.5×3,000（27.5 ： 3.94×0.06×118.1）

57:40×2.5×573（3.5 ： 1.57×0.1×22.6）

39:40×2.0×484（2.4 ： 1.57×0.08×19.1）

NC unit specifications

＊Functions listed under（NC） and （Conversation） are available only for NC programs and conversation programs respectively.＊3／The TC-31B is not equipped with the heat expansion compensation system.

CNC-B00

TC-22B, TC-20B : 5 axes（X, Y, Z, 2 additional axes）

TC-32BN, TC-31B : 7 axes（X, Y, Z, 4 additional axes）

5 axes（X, Y, Z, A, B）

0.001mm, 0.0001inch, 0.001deg.

±9999.999mm, ±999.9999inch

12.1-inch color LCD display

Approx. 10 Mbytes（Total capacity of program and data bank）

USB Interface　 , RS232C 1 ch（9pin）, Ethernet

1,024 programs（Total capacity of program and data bank）

NC language, Conversation（changed by parameter）

Conversion from conversation program to NC language program available

● Absolute / incremental● Inch / metric● Corner C / Corner R● Coordinate rotation● Synchronized tap● Coordinate system setting● Dry run● Restart● Backlash compensation● Pitch error compensation● Rapid traverse override● Cutting feed override● Alarm history● Status log● Machine lock

● Computer remote● High-accuracy mode A● Tool length measurement● Tool life management / spare tool● Background editing● Graphic display● Subprogram● Helical / conical interpolation● Automatic power off （energy saving function）● Servomotor off standby mode（energy saving function）● Chip shower off delay● Automatic coolant off（energy saving function）● Automatic work light off（energy saving function）● Automatic heat expansion compensation system, Ⅱ　 （X,Y,Z axes）

● Expansion workpiece coordinate system● Scaling● Mirror image● Menu programming● Program compensation input● Tool length compensation● Tool diameter compensation● Macro function（system variables）● Local coordinate system● One-way positioning● Operation in tape mode

● Operation program● Schedule program● Automatic tool selection● Automatic cutting condition setting● Automatic tool length compensation setting● Automatic tool diameter compensation setting● Automatic calculation of unknown number input● Machining order control

（NC） （Conversation）

＊1

＊3

＊2

＊When program size is bigger than 2 Mbytes, machine works with extended memory operation. ＊Ethernet is a trademark or registered trademark of XEROX in the United States.＊1 and ＊2 : Helical/conical interpolation and USB interface are optional for some models. Please see the TC Option List.

Positioning

NC unit specificationsStandard NC functionsMachining capability

CNC model

Controllable axes

Minimum setting unit

Linear : 4 axes（X, Y, Z, one additional axis）

Circular : 2 axes　　Helical / conical : 3 axes（X, Y, Z）

Interpolation

Maximum command value

Display

Memory capacity

External communication

No. of registerable programs

Program format

Simultaneouslycontrolled axes

Standard NC functions

1718