Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
GLOBAL INSPECTION SDN. BHD. (Formerly known as Global Inspection Services Sdn. Bhd.)
www.globalinspection.my
TABLE OF CONTENT
SECTION 1: INTRODUCTION
SECTION 2: OVERVIEW
SECTION 3: LICENSES, AWARDS & TESTIMONIAL
SECTION 4: ORGANIZATION CHART
SECTION 5: CURRICULUM VITAE
SECTION 6: LIST OF PREVIOUS & CURRENT PROJECTS
SECTION 7: SCOPE OF SERVICES
SECTION 8: LIST OF EQUIPMENT
SECTION 9: HEALTH, SAFETY AND ENVIRONMENT
Section 1, Page 1 of 1 ____________________________________________________________________________________
____________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
INTRODUCTION
Global Inspection Sdn. Bhd. (Formerly known as Global Inspection Services Sdn. Bhd.) is a private limited company established in July 1998 to participate in the challenging and competitive demanding world of construction and manufacturing industries. Global Inspection is backed by experienced management and technical personnel who have more than 20 years experience in their respective fields. Global Inspection truly believe that the combination of experience, commitment and efficiency of management personnel with the high level skilled of technical personnel could provide the highest level of professional services to all their clients. The increasing number of clients proves and speaks the volume for the satisfaction and confidence generated amongst clients. We specialized in: a. Non Destructive Testing and Inspection services such as Radiography Testing,
Ultrasonic Testing, Magnetic Particle Inspection, Penetrant Testing, Hardness Testing and Positive Material Identification. Other methods of NDT are also available upon request.
b. Professional Manpower Supply, Engineering Inspection and Expediting c. WPS/PQR Qualification d. PWHT (Localize and Furnace) e. ASME Audit The company management plus the key personnel does feel proud and confident to step in and make the next debut whenever there is opportunity given. Company Mission Global Inspection Sdn. Bhd. mission is to provide precise and efficient services to the client in order to save them time and money and ultimately to achieve high quality and safe products.
Company Vision Global Inspection Sdn. Bhd. assure its clients reliable testing by means of the latest up-to-date techniques and modern equipment. Its clients avoid the expenses of training and employment of special skilled personnel, who may not be fully utilized, and the purchase and maintenance of expensive testing facilities, which may be rapidly out-dated.
SECTION 1
Section 2, Page 1 of 1
____________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
OVERVIEW
1.0 Company Name Global Inspection Sdn. Bhd. (Formerly known as Global Inspection
Services Sdn. Bhd.) 2.0 Company Registration No.
465777 A 3.0 LPTA License No.
LPTA / A / 674
4.0 Petronas License Code SQ1010100 - Basic NDT SS1120000 - Post Weld Heat Treatment 5.0 Ministry of Finance Certificate No. (MOF) K22154724541816824
6.0 Company Secretary Israa Corporate Advisory Sdn. Bhd. 115-1 Jalan Toman 6, Kemayan Square, 70200, Kemayan Square,
Seremban, Negeri Sembilan, Malaysia 7.0 Directors
Badri Bin Harun Zamzuri Bin Harun Nur Elisa Abdullah
SECTION 2
Section 3, Page 1 of 2
____________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
LICENSES, CERTIFICATES, AWARDS & TESTIMONIAL
1.0 Company Registration License
2.0 Petronas License
3.0 AELB (LPTA) License
4.0 DOSH Certification (Pegiktirafan oleh Jabatan Keselamatan Dan Kesihatan Pekerjaan Malaysia-JKKP)
5.0 MOF – Ministry of Finance 6.0 Tenaga Nasional Berhad (Certification No : 3004318)
7.0 PED (EC) Certification - Certificate of Approval of NDT Personnel in Accordance with the requirements of the Pressure Equipment Directive 97/23/EC and the Pressure Equipment Regulations 1999, UK Statutory Instrument 1999 No. 2001 and 2002 No. 1267
8.0 ASNT Certification Level III - Certificate of Approval of NDT Personnel
with established and published Requirements for Certification by ASNT as ACCP Professional Level III
9.0 Radiation & Nuclear Safety Award issued by Ministry of Science,
Technology and Innovation (MOSTI) Malaysia & Atomic Energy Licensing Board (AELB) Malaysia
SECTION 3
Section 3, Page 2 of 2
____________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
10.0 NDT Sub-contractor for ASME Coded U-Stamp projects and PED projects for the following companies:
KUALA LUMPUR/NEGERI SEMBILAN/SELANGOR/MELAKA
Asia Propel Sdn. Bhd.
Citech Energy Recovery System Malaysia Sdn Bhd
Eversendai Energia Sdn. Bhd.
HM Cryogenics Sdn Bhd
Jord Malaysia
Petrotechnic Oilwell Construction Sdn. Bhd.
Pharmafood Engineering Sdn Bhd
Seremban Engineering Sdn. Bhd.
Syarikat Steelcon Sdn. Bhd.
Steelcon Heat Transfer Equipment Sdn Bhd
Taner Industrial Technology (M) Sdn Bhd
True Features Corporation Sdn Bhd.
Tunas Asal Sdn Bhd
Welfab Engineering Works Sdn. Bhd.
Yee Loong Engineering Sdn Bhd
JOHOR
Dfiniti Technologies Sdn Bhd
Serba Dinamik Sdn. Bhd.
Esstar Vision Sdn Bhd
Dynaciate Engineering Sdn Bhd
PAHANG/TERENGGANU/KELANTAN
Asturi Metal Builders (M) Sdn Bhd
HSE Resources Sdn. Bhd.
PERAK/PENANG
Thye Heng Engineering Sdn Bhd
____________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Attachment 1.0 - Company Registration License
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Attachment 2.0 - PETRONAS License
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Attachment 3.0 - AELB License
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Attachment 4.0 - DOSH Certification (Pegiktirafan oleh Jabatan Keselamatan Dan Kesihatan Pekerjaan Malaysia-JKKP)
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Attachment 5.0 - Ministry of Finance(MOF)
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Attachment 6.0 - Tenaga Nasional Berhad(TNB) Certificate
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Attachment 7.0 - PED (EC) Certification
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Attachment 8.0 - ASNT Certification Level III
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Attachment 9.0 - Radiation & Nuclear Safety Award
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Attachment 10 - NDT Sub-contractor for ASME Coded U-Stamp projects and PED projects
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Se
ctio
n 4
Section 5, Page 1 of 6
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
SECTION 5
CURRICULUM VITAE
1.0 KEY PERSONNEL
BIL NAME POSITION
1. Fozi Harun General Manager
2. Badri Harun NDT Manager & RPO
2.0 LIST OF NDT PERSONNEL
ASNT Qualification
PED Qualification
PCN Qualification AELB Qualification
Section 5, Page 2 of 6
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Personal Name : Mohd Fozi Bin Harun
I / C & DOB : 660101-11-5311 & 1 January 1966 Nationality : Malaysian
Qualification
Academic : Diploma in Petroleum Eng., Universiti Teknologi Malaysia Welding : CSWIP 3.1 Welding Inspector NDT : ASNT Level 2 UT, RT, MPI, PT
Synopsis Of Experience Twenty four (24) years experience in Engineering, Fabrication, Erection, Inspection & Testing for Offshore Pipe Laying, Offshore Platform Fabrication and Installation, Offshore Hookup & Commissioning, Plant Shutdown & Maintenance, for petrochemical plant, power plant, oil & gas projects and general industries. Has experience as NDT Manager, QA/QC Manager, ISO 9000 Lead Assessor, Expeditor and Engineering Inspector. Summary of Experience Mar 09 - Present : Global Inspection Services Sdn Bhd - Position : Senior Manager July 08 - Feb 09 : Alfasi Construction (Singapore) Pte Ltd - Position : Inspection Manager Apr 08 - Jun 08 : Sikojaya Sdn Bhd - Position : QA/QC Manager Dec 07 - Mar 08 : Aarding T. Acoustic BV, The Netherland - Position : General Inspector May 07 - Oct 07 : JFE Engineering Corporation, Japan - Position : Pipeline Inspector Jan 02 - Oct 06 : Victor Buyck Steel Construction Sdn Bhd - Position : QA/QC Manager Nov 00 - Dec 01 : JGC Corporation, Japan - Position : General Inspector Apr 00 - Nov 00 : Petronas Carigali Sdn. Bhd - Position : Structure and Welding Inspector Nov 99 - Mar 00 : Petronas Carigali Sdn. Bhd - Position : Piping and Welding Inspector Jul 99 - Oct 99 : Petronas Carigali Sdn. Bhd - Position : Pipeline and Welding Inspector Mar 99 - Jul 99 : Esso Production (M) Inc – Position : General Inspector Dec 98 - Feb 99 : OGP Technical Services / SWEC Zainal JV - Position : Vendor Inspector Jun 98 - Nov 98 : Brown and Root Eng. Ser. Singapore - Position : General Inspector Sep 95 - May 98 : Professional Inspection Services Sdn. Bhd - Position : Technical Director Dec 94 - Aug 95 : John Brown Projects (M) Sdn. Bhd - Position : General Inspector Sep 93 - Dec 95 : Esso Production (M) Inc - Position : General Inspector Jul 93 - Aug 93 : Moody International, Kuala Lumpur - Position : Vendor Inspector Apr 93 - Jun 93 : Petronas Gas Berhad - Position : Shutdown and Plant Inspector Jan 93 - Mar 93 : Petronas Gas Berhad - Position : Pipeline and Welding Inspector Oct 87 - Dec 92 : Permint Engineering Sdn. Bhd - Position : QA/QC Executive
POSITION: GENERAL MANAGER
Section 5, Page 3 of 6
________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Personal Name : Badri Bin Harun I / C & DOB : 740311-11-5205 & 11 March 1974 Nationality : Malaysian
Technical Qualification Ultrasonic Testing : PCN Level 2 (3.1, 3.2, 3.8, 3.9) : Lloyds Register EC Directive (PED) : ASNT Level 2 Radiography Testing : PCN Level 2 Radiographic Interpreter : Lloyds Register EC Directive (PED) : ASNT Level 2 Interpreter/Operator : LPTA Radiation Protection Officer : LPTA MLVK Level 1 Operator Magnetic Particle : Lloyds Register EC Directive (PED) : ASNT Level 2 Penetrant Testing : Lloyds Register EC Directive (PED) : ASNT Level 2
Synopsis of Experience Twenty (20) years experience in Engineering Inspection and Non Destructive Testing works. Experience includes working as Operation Manager, Radiation Protection Officer, QA/QC Inspector, NDT Inspector and Radiographic Interpreter for petrochemical projects, power plant, oil & gas projects and general industries.
Summary of Experience
Aug 1999 to Present : Global Inspection Services Sdn Bhd Position : NDT Manager & Radiation Protection Officer Jan 1999 to Jul 1999 : Penang Shipbuilding & Construction Sdn. Bhd. Position : QC Inspector Jul 1998 to Dec 1998 : Kvaerner Process System Asia Pacific Sdn. Bhd. Position : NDT Inspector Apr 1995 to Jun 1998 : Professional Inspection Services Sdn Bhd Position : NDT Inspector Apr 1992 to Mar 1995 : Prescan Sdn Bhd Position : Senior NDT Technician
POSITION: GENERAL MANAGER
Section 5, Page 4 of 6
__________________________________________________________________________________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
LIST OF NDT PERSONNEL
ITEM NAME OF TECHNICIAN QUALIFICATION & METHOD
UT MPI DPI RT RI
1. Saharudin Bin Kambari ASNT Level III ASNT Level III ASNT Level III ASNT Level III -
2. Badri Bin Harun
ASNT Level II ASNT Level II ASNT Level II ASNT Level II ASNT Level II
- - - AELB RPO -
PCN Level 2 (3.1, 3.2, 3.8, 3.9)
- - - PCN Level 2
PED (Lloyd's Register)
PED (Lloyd's Register)
PED (Lloyd's Register)
PED (Lloyd's Register)
PED (Lloyd's Register)
3. Zamzuri Bin Harun
ASNT Level II ASNT Level II ASNT Level II ASNT Level II ASNT Level II
- - - AELB PY -
PED (Lloyd's Register)
PED (Lloyd's Register)
PED (Lloyd's Register)
PED (Lloyd's Register)
PED (Lloyd's Register)
4. Mohd Fozi Bin Harun - - - ASNT Level II ASNT Level II
5. Alawddin Bin Abu Bakar - ASNT Level II ASNT Level II - ASNT Level II
6. Che Wan Shah Rizam ASNT Level II ASNT Level II ASNT Level II ASNT Level II ASNT Level II
7. Herwan bin Mohd Suhud - ASNT Level II ASNT Level II - -
8. Zulhilmi Bin Mohammad Razin ASNT Level II ASNT Level II ASNT Level II - -
9. Rasdan Nizar Bin Akmad @ Md Ramli ASNT Level II ASNT Level II ASNT Level II - -
10. Hasnul Hasbi Bin Baharum - - - ASNT Level II -
- - - AELB (P) -
Section 5, Page 5 of 6
__________________________________________________________________________________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
LIST OF NDT PERSONNEL
ITEM NAME OF TECHNICIAN QUALIFICATION & METHOD
UT MPI DPI RT RI
11. Mohd Nurhafizi bin Mohd Saad - - - ASNT Level II -
- - - AELB (PL) -
12. Mohamad Asyraf Bin Mohd Nazri - ASNT Level II ASNT Level II ASNT Level II -
- - - AELB (P) -
13. Jurikam A/L Juriman - ASNT Level II ASNT Level II ASNT Level II -
- - - AELB (PL) -
14. Muhammad Haziq Bin Mohd Ali - ASNT Level II -
- - - AELB (PL) -
15. Muhamad Fakhruzzaman B. Mohd Zamani - ASNT Level II ASNT Level II ASNT Level II
- - - AELB (P)
16. Muhamad Amirul Bin Suratman -
ASNT Level II ASNT Level II ASNT Level II
- - - - - AELB (P)
- - - - AELB (PL)
17. Muhammad Hilmi Bin Mohd Nazar - - - ASNT Level II
- AELB (P)
18. Zaidzulakmar Bin Md Jin @ Cheman - ASNT Level II ASNT Level II - -
Section 5, Page 6 of 6
__________________________________________________________________________________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
LIST OF NDT PERSONNEL
ITEM NAME OF TECHNICIAN QUALIFICATION & METHOD
UT MPI DPI RT RI
19. Mohd Azwan Bin Abu Bakar ASNT Level II ASNT Level II ASNT Level II - -
20. Noorshyam Bin Jamaludin -
ASNT Level II ASNT Level II - -
21. Muhammad Fakhri Bin Rosli -
ASNT Level II ASNT Level II - -
22. Muhammad Fahmiluddin Bin Ramli -
ASNT Level II ASNT Level II - -
23. Syafien Bin Awang - ASNT Level II ASNT Level II - -
24. Mohd Irfan Bin Hisham - - - ASNT Level II -
25. Ahmad Fakhrurazi Bin Ishak - ASNT Level II ASNT Level II - -
26. Mohammad Shahrurrahem Bin Mohammad
Jufri - ASNT Level II ASNT Level II - -
27. Mohamad Firzul Ashrul Bin Abu Hassan - ASNT Level II ASNT Level II - -
28. Mohamad Amir Fikri Bin Natiran - ASNT Level II ASNT Level II - -
29. Mazrin Bin Musa - - - ASNT Level II -
Section 6, Page 1 of 5
_______________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
LIST OF PROJECT EXPERIENCE
EXPERIENCE - YEAR 2019 ( Page 1 )
NO. CLIENT CATEGORY PROJECT
1. AD Skill Solution UTG, MPI Steam Drum & Header Boiler
2. Adsof Synergy Sdn Bhd RT Fabrication of T-38-01, AUS 50/32 Mixing Tank
3. Asia Propel Sdn Bhd RT Fabrication of Multiphase Flowmeter(MPFM) for Ca Tam Oil Field Development Project
4. Bennova Mechanical Engineering Sdn Bhd
PWHT P181586 Cogeneracion CPSA San Lorenza, R182519 V17517 Barker, P181980 Montgomery County
5. Boilermaster Sdn Bhd PWHT, DPI
MMHE-Tube Super Heater Replacement for LNG Seri Amanah( TPJ0116-18), Nozzle Head Replacement for Boiler Unit 20 at Tanjung Bin Plant (TPJ0117-18), Forcing Vaporizer Mmhe & Kualiti Alam
6. Big Billboard Builders Sdn Bhd MPI
Billboard Structure (Steel Truss Bridge)
7. Catonic Fabricators Sdn Bhd MPI, WQT Project in KLIA, WQT for new welder
8. Chow Steel Engineering (Rawang) Sdn
Bhd
MPI, UT JIMAH Project
9. Citech Energy Recovery System
Malaysia Sdn Bhd
RT KVMRT L-2, Penguin Redevelopment Project, Sagar Laxmi
Modification Project
10. Dynaciate Engineering Sdn Bhd UT,MPI, RT,
WQT
F462 Plenium A Project, Kiswire Neptune (Tanjung Langsat Port), 1408 Karbala Refinery Project, 1414 WQT, SP004 Polyplastic
11. Dynaciate Fabricators Sdn Bhd U- Stamp Audit Level III & NDE Services for Asme U-Stamp Certification
12. Econpile (M) Sdn Bhd WQT Renewal Review and endorse Welder certificates for renewal
13. Esspe Tech Sdn Bhd RT
Solid Waste Advanced Management Recovery
14. Favelle Favco Cranes (M) Sdn Bhd RT, MPI SN 2322 6/10k
15. Fenimor Corporation Pte. Ltd PMI
Trading rare material and recovered scrap material
16. HCR Bridge Machinery MPI
Inspection on Segment Trolley
17. HM Cryogenics Sdn Bhd RT, UTL, DPT,
MLNG Tiga V-305 Improvement TD-351 MLNG V305 and
V305A, MLNG Tiga V-305 Improvement T3-351 AB,
Engineering, Procurement, Fabrication & Delivery of LLP
Steam Condenser, General Arrangement for Generation Gas
Heater.
18. HRSB Engineering & Construction Sdn
Bhd RT, DPI PP(T)SB Turn Around 2019
19. Impian Selama Sdn Bhd MPI TNB HQ Campus Development (Phase 1), Commissioning of
132KV XLPE Submarine Cable from Kuala Perlis
20. JI Engineering DPI, UT, RT Shell plate, plate (T Joint)
21. Jord Malaysia Sdn Bhd RT Cobia Restart Project, Fulcrum Sierra Biofuels Project, Salalah Methanol Project, Bab Intergrated Facility Project
22. KNM Process System Sdn Bhd PMI K1603066
23. Mampu Bina Enterprise RT WQT
24. MVE Technologies RT, PWHT, RI MTSB-MO (18033/18022/18028/18033)
SECTION 6
Section 6, Page 2 of 13
________________________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
EXPERIENCE - YEAR 2019 ( Page 2 )
NO. CLIENT CATEGORY PROJECT
25. Muhibbah Steel Industries Sdn Bhd RT, RI, Level III UTA MUDMAT Project, 18/0005 Telok Gong
26. Neos Engineering Sdn Bhd RT, DPI Maintenance LPG Cylinder
27. Ocelot Engineering Services Sdn Bhd MPI, UTG Steam Generator at Showa Denko, Hot Water Boiler
28. Paras Saksama Sdn Bhd UT, DPI, RT KPP VCM Emission Facility Project, IW Tank 788 & 789, FPG Shutdown, 50L Piping,
29. Principle Persepctive Engineering Sdn Bhd
UT MRT V202 Project
30. Sedar Perkasa Sdn Bhd RT LP Vertical Receiver Tank (D-VO3 & D-V04)
31. Sinar Cekap MPI, Langsat Terminal(Three),
32. Syarikat Steelcon Sdn Bhd UT, RT, RI
33. Steelcon Heat Transfer Equipment Sdn Bhd
RT, PMI, UT Norman-8 Project Extender Oils Plant Construction, Fatty Acid Continous Hydrogenation, 84 Model L40-G Max System Cyclonios
34. Sinopec Engineering Group Malaysia Sdn Bhd
HT, DPI, PMI Package 2, SINOPEC RAPID Project, Pengerang
35. TMM Engineering Services Sdn Bhd DPI, RT WQT SGGP WSP, 3" CL 150 Cold Tapping On To 30"
36. Vemo Remo Engineering MPI Overhaul Boiler,
37. Zelleco Engineering Sdn Bhd MPI Log Boom Site 3 & Site 5
Section 6, Page 3 of 13
________________________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
EXPERIENCE - YEAR 2018 ( Page 1 )
NO. CLIENT CATEGORY PROJECT
1. Air Product Malaysia Sdn Bhd RT,UTTG , DPI
MPI
Shutdown Project, DOSH equipment, V- Duct Lifting Lug, V-10S Piping, Natural Gas Piping Steam Drum Piping, Steam Trap, Pv5055+5109, BFW Collar Crack, Excharger+Steam Drum, Deaeractor, UT Assessment S16.60, STEAM LINE (PV-405)
2. Bennova Mechanical Engineering NDT,PWHT
P 160584 Fadhili Gas Program Project, P175226 Hickory Run,
P160584 Casing & Rainhood , Aramco, ,Casing 2nd Batch,
P160584 Aramco, P 1826799 Yanbu, Export Refinery, P171039
Berkprai Cogeneration, PU 175060 Lake Charles, PU 175060 ,
P161318
3. CHOW STEEL ENGINEERING (RAWANG) SDN. BHD
MPI,UT, DPI
Duct Support Structure – Unit- 2 Jimah , Ishi Power, Jimah Project, Jimah, 9.6m Length Shell Cylinder Tube Replacement For Cul 1&2, Ship Unloaded (Shell Plate), Duct Support Unit 2 (P375s01 & P372s01), Jimah (Duct Support Structure - Unit 2), Jimah East Power - Soot Blower Holder & Duct Stopper
4. D-HCR BRIDGE MACHINERY (M) SDN
BHD UT/MPI 1804 – Project Batang Kali
5. D-KNM PROCESS SYSTEM SDN BHD
PMI , FERRITE
TEST, PWHT
K 1706014-PENSPEN Singapore Peoject , KTP1609004-Vent
KO Vessel & Plant for Angore Surface Facilities &Pipeline
Project (ASFP)-Wood Group, K1702005-4 Columns for Melaka
Refinery Diesel Euro 5 Project(MRDE) Melaka, K 1707045-
Reactors Package for HRC Euro IV(M) Project Port Dickson.
6. D-GLOBAL WALL (MALAYSIA) SDN BHD MPI KL 118 - KLANG
7. Dynaciate Fabricators Sdn Bhd PMI, RT, UT,
MPI, DPT, WQT
F364- Rgtf Project, Wqt-Jimah East Power, Rgtf Skid, 1391 - Msm Sugar Refinery Project, Verdepaum Malaysia Project, F357 - Pipe Fab Asu Rapid Project
8. ESSTAR VISION SDN BHD WQT , RT
25 Mt Storage Tank, Carbon Column Vessel, M077/M089, Asu Plant Linde, Singapore Jurong Cogeneration Project, Drain Adaptor Elbor 120', Drain Adaptor Elbow 112.5' , Air Release Adaptor Elbow 90', Asu Plant / Filter Body / 25 Mt Storage Tank, Ss804 Hr
9. Principle Perspective Engineering Sdn Bhd
UT, MPI Module 1 & 2, Kenyir Pylon Bridge
10. Hamdan Abdullah Sdn Bhd WPS, WQR
Full Water Tank, Open Top 8x8 X 20ft Container Complete With Access Platform, Swan Air Compressor With Air Hose Suitable For Running 4” Pneumatic Air Grinder Inside Water Tank, Crane 45 Ton For Tank Lifting
11. HRSB DPI,RT,PMI,
PWHT
Fabrication of 6 Inches SCH 80 N2 Manifold, WPS/HSE/P8 TO P8 , WQT FOR TA PDH 2018, ATSB TA March 2018 – WQT, PCPSB - TA2018, ATSB TA 2018, PCPSB - Turnaround 2018 (T-1714), Turn Around Shutdown ARKEMA 2018, WQT - RT WELDER TA PDH.
12. KNM Process Systems Sdn Bhd PWHT PWHT Firing Reactor R5001 for SRC at KNM Melaka
13. MVE Technologies Sdn Bhd PWHT, RT,
VISUAL INSPECTOR
MTSB-MO-18002 (Radiography Test), MTSB-MO-18008 (PWHT, Visual Inspection & RT), WO-PUR/18/000340, WO-PUR/18/000358R1, WO-PUR/18/000365, WO-PUR/18/000329R1
14. KBV Engineering Sdn Bhd DPI, MPI, RT,
PWHT Replacement tube boiler, YTL CEMENT AQC 2 Project, WQT & WPS PROJECT
Section 6, Page 4 of 13
________________________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
EXPERIENCE - YEAR 2018 ( Page 2 )
NO CLIENT CATEGORY PROJECT
15. Syarikat Steelcon Sdn Bhd (SHE) NDT
SHE 13/17 , SHE 11/17 (21d03) Reactor, SHE 19/17 - Glycerine Distillation & Bleaching, SHE 14/17 (Steam Generator), SHE 11/17 , SHE 16/17 & SHE 17/17, E-108 Replacement, SC 14/17 (Hair Pin) , SC 17/17 (EXPG - Lifting Lug)
16. Pharmafood Engineering Sdn Bhd PMI , DPT, DPI, UT, RT
SS316L 3500L Buffer Prep Tank , SS316L 4000L, SS316L 15000L Half Pipe Jacketed Mixing Vessel ., SS316L 13000L Vertical Cocoa Ribbon Mixer, SS316L 13000L Insulated Mixing Vessel 1.
17. TMM Engineering Service Sdn Bhd RT, UT, MPI ,
UTFD, UTL
PGB/GTR-T-902/14-KP181.9- Lawas Pipe Replacement (WQT), SSGP (Practice Welding), TMM-WQT-M0187, TMM-WQT-M0187 (NORMAL CAP), TMM-WPS-094, TMM-WPQT-094/18 R2, BRUNEI LNG
18. TWI ABM Training & Certification Sdn Bhd
RT Tesdec/Yayasan Peneraju 6GC – WQT, Kimpalan Skim Tahap 3 (Final Test) WQT, WQT Project.
20. PARAS SAKSAMA SDN BHD RT , DPI, PMI IW Break Tank, UTL New IW Storage Tank Project, Welder Qualification Test PS/056/PJ/18, Kaneka Tank Fabrication / G18G Shed Spreader Bar,
EXPERIENCE - YEAR 2007-2017 ( Page 1 ) NO CLIENT CATEGORY PROJECT
1. Actus Tech Services Sdn Bhd MPI Maintenance & Refurbished Of Hydrolic Cylinder
2. Akra Engineering RT, NDT
Inspection
General Arrangement For 430l Baby Tank, Welder Qualification Test (WQT), Welder Qualification Test (WQT), 10 KL LPG Tank, Jurong Point Complex, Singapore, JDA Block B 17 Development
3. Alam Langkawi Welder
Inspector (WI)
Komtar Phase 2 - (Elevated Structure/Lift Shaft Structure), Komtar Phase 2 - (Elevated Structure/Lift Shaft Structure), Upgrade Komtar Pulau Pinang, Bubble Lift Shaft Structure
4. Alawi Metal & Trading RT Welder Qualification Test (WQT)
5. Alfasi Construction (Singapore) Pte Ltd
Independent Testing
Authority(Supply of ITA)
Marina Bay Sand Singapore, Steel Structure
6. Asia Propel NDT
Procurement & Fabrication Of 212 Units Of Air Heater Main Part, AP 28/16, AP 13/16 , AP 08/16 , AP 07/16-To carry out UT/MPI/DPI/HT, EPCC Of MRS For SPR Energy, Gas & Condensate Metering System, Seligi - A Matering System, Provision of supply, delivery & fabrication of 6 unit danser, vessel for Carigali Sdn Bhd, MMHE-NGL-To carry out DPI at MMHE
7. Asturi NDT
PBSB, PM Wellhead Support Structure, EPSO Layang Conversion Project, Polyplastics Asia Pacific Sdn Bhd, Petronas Chemicals Group Berhad, Kencana HL Sdn Bhd, BASF, PPTSB, PBSB, PM Wellhead Support Structure, Asturi, EPSO Layang Conversion Project, Polyplastics Asia Pacific Sdn Bhd, Petronas Chemicals Group Berhad, Kencana Hl Sdn Bhd, BASF, PPTSB, E6 Field Development Project, Pressure Vessel Fabrication, West Desaru Wellhead Support Structure, PCSB, Cameron Solution (TGAST Project), Basf (Petronas) Design And Fabricate Of 1 Unit Heat Exchanger, Design And Fabricate Of New Cooler E1505 BASF Supply & Fabricate TGAST Project, Jda Block 17 And B-17-01 Field Phase 3 Development, Toray BASF, Edes Technology
Section 6, Page 5 of 13
________________________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
EXPERIENCE - YEAR 2007-2017 ( Page 2 )
NO CLIENT CATEGORY PROJECT
8. Ban Lee Hin DPI, MPI, UT
Air - Asia TPO3 - Meeting Pod, Pentas Flora - Extended Tank, Storage Area, Covered Driveway & Skylight At Level 5, Public Holdings S/B, Aeon Co. (M) Bhd - AU2 Cinema Roof, Kemayan Square - Link Bidge, Bluecope - CS45 New Chemical Tower, Pentas Flora Sdn Bhd - Distillation Tower
9. Bennova DPI , PMI, RT
P 14621 311 RM CCC Tula Paquetes (Weldment), P 15231 / P 15469 / P 15622 / P 14405 / P 15141 / P 15295 / P 15407 Hail P 15308 / P 14065 / CSL Behring P15621 / BME Stock / P 15647, P 15125 / P15523 / P 16000 VYNCKE / P 1574 , P 160269 CMPC / P 15800 TUA Johnsonville, P161252 Talara, P11609 Amata ABPR5 , P161294 ATA P&S , P161336 Casing P 14621 311 RM CCC Tula Paquetes (Weldment), P 14621 Cerry/Tula Paquetes 1 Y 2 (For Base Metal), P 15586 Philips 66, Cores P13430 Polk2 , P14420 Boufarik & P14214 Dominion Cove Point, P14187 Woodbridge Kiewitt Project, P 14394 Siam Pure Rice, P14431 Pusri LI & P14316 BFB Project, P11092 Central De Ciclo, Combinado Baja California, P14158 & P14296 Nishi Nagoya, Cores For P14394 Siam Pure Rice & P14393 Nneg, P14525 CDU LI, P14317 CBC P15142 Djelfa, P14330B- WA Parish & P14366 - St Charles Project, P13469 Wildcat Point Project, P14426 , Ashuganj North Project, Project P13039 Guaracachi, P14293 Amata Bowin Project, P14409 Puma Bop-2, P13583 Napanee Project , P14536 Khabat, P15278SAhat, P14512 Marshall,, Townp15071 Egale Vally, P14536 Khabat, P 14393 NNEG , P 11092 Baja California , P 14518 Nishi Nagoya, Eagle Valley P15071, P15196 South Hedland, P14042 Duke Lee, P14611 Stone Wall
10. Bukit Fraser Thermal Technology S/B Consultancy DOSH Workshop Certification for Pressure Vessel
11. Catonic Fabricators UT, MPI
MRT Project, WQT , Project Mass Rapid Transit (MRT) MRT-AKB Pedestrian Bedestrian Bridge, AZRB - MRT Project, PNB East Klang Valley Expressway (EKVE) UDA, AZSB - MRT Covered Walkway, Welder Qualification Test, Utp - Main RootKenyir Trade Centre, Link Bridge , Project Perodua, R&D Building UTP Tronoh, Uitm Raub - Blok Surau, Uitm Raub (Bus Bay), Project Uitm Raub , Walk Way, Rector Parking & Medan Selera Canopy, Project Uitm Puncak Alam, Tasik Kenyir Free Zone Project, UTM KL (Multipurpose Hall UTM), Dewan Serbaguna Uitm Puncak Alam, Tasik Kenyir (Surau , Office , Guard House), Kenyir Free Zone / Block: Layout 1 Shopping Mall, Project CR, Kenyir Lake / Hatimuda Sdn. Bhd., Project Shopping Mall Layout 4, Kenyir, Trade Centre - LY4
12. Chow Steel Engineering Sdn. Bhd. MPI, WQT Jimah East Power , TKIS
13. Citech PMI, RT, DPI
Bardegg Baronia - CCM 004, WHRU & Stack - CCM 005 Exaust Stack (CCM-005) & CIBAS 100 (CCM-004) , Level III & NDE Services for ASME Certification , Project Betera (CCM 008), Betara Development Project , Gemusut Project, Bardegg Baronia - CCM 004, Whru & Stack - CCM 005
14. Eastern Soldar MPI PST Bintulu Diesel Tank Construction, PS Terminal, EPCC of Methanol Tank and Associated Facilities, PST Bintulu Diesel Tank Construction, PS Terminal
15. Eco Tower Sdn Bhd PWHT FPSO Lease Contract for Madura Strait BD Field Development
16. E Hub Engineering UT, UTG Conche Tank, Mill Starter SP 21 (PMT 1279, Tank Asettico 200L, Tank Asettico 200L
17. Eversendai Energia Sdn. Bhd. RT Finish Super Heater , Side Inlet Header
Section 6, Page 6 of 13
________________________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
EXPERIENCE - YEAR 2007-2017 ( Page 3 )
NO CLIENT CATEGORY PROJECT
18. Envipure Prive Limited PMI Mega Deal CCPP Project ANAA
19. ETJ NDT Surveillance Sdn. Bhd. NDT Steel Structure for Petronas Penapisan Melaka, TNB Tuanku Jaafar Power Station, PD2.
20. Favelle Favco RT, UT, MPI,
PMI
Baronia, Kinabalu Redevelopment, Jawtika IC SK 310 B15, Development Project, Turret Reinforcement Project Crane SN-1161, Baronia, Modification On Turret Strengthening Job - SN 1129 Andp-E Turret Reinforcement Project, Reinforcement Project, Crane SK Machines LTD. , WQT 021-2015, WQT 022-2015, Project Tower Crane, Crane P2052, H1369, B371, CHMI-139-2, SK 605, CHMI-129-5, Supply Of Pedestral, SK 606, CHMI(JS)-146, CJ 50-02, Shah Deniz 2 Project (2000/2001/2003) , Crane 2039, 2040, 2052, 2053 , Hull No. B351 , CHMI-129-3, Project Crane Hull No. CJ50-1, Besar A Project, Hull No. P2047, Arco Arjuna, Cj46 Jack Up, Luff Winch Frame, Hoist Winch Frame, Project Shell Prelude (1850), Project Crane CHMI-131-2, Hull No. B352, Hull No. B351, Hull No. P2053, Offshore Crane Fabrication
21. Fes Equipment Services Sdn. Bhd. Supply UT, MPI
Technician 6/10K Boom Repair (F0201002)
22. Global Metering Solution Sdn Bhd RT, DPI
KEV Transmitter Chamber, Endless & Hauser / Emerson Process Management, Tangga Barth Level Transmitter Chamber North Bangkok Power Plant Transmitter Chamber, TCOT - DSC GWR Transmitter Chamber
23. Haisung Steel Engineering UT, MPI, DPI Matrade Exhibition Centre Project
24. Harmony Style MPI Material Handling 1
25. Hawks Technologies MPI, DPI, PMI Palas Piping Repair (AFS011), Tapis Eor Brownfield Modification And Retrofit's, Tapis E
26. Hexagon Composite Engineering Sdn. Bhd
DPI Homer V-1883 & V-1884 Dimineralize Storage Tank, Steel Platform and Cage Ladder
27. HSE Resources Sdn. Bhd RT,DPI MTBE Turn Around 2017 – WQT, Spreader Bar DPI on Lifting Lug TPOSUB-79, PP(T)SB - CRU TA 2017 (T-1702) , TPOSUB-320
28. HM Cryogenics ASME Level III & NDE Services for ASME Certification
29. HSL Constructor Sdn Bhd MPI, UT Jimah East Power
30. Ideal Plant Technology Sdn Bhd RT, MPI Natural Gas Piping at JG Container S/B, Tubesheet , WPQ
31. Institut Latihan Perindustrian Bukit Katil
RT WQT, Project Welder Qualification Test (WQT)
32. Institut Latihan Perindustrian Kuala Lumpur
RT WQT, Project Welder Qualification Test (WQT)
33. Institut Latihan Perindustrian Ledang
RT WQT , Project Welder Qualification Test (WQT)
34. Institut Latihan Perindustrian Pedas RT WQT, Project Welder Qualification Test (WQT)
35. Impian Selama Sdn. Bhd. MPI East Resident, Pakej D49-Pembinaan Rangkaian Paip Pembentungan Di Kajang, Selangor (Steel Bridge Pipe River Crossing)
Section 6, Page 7 of 13
________________________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
EXPERIENCE - YEAR 2007-2017 ( Page 4 )
NO. CLIENT CATEGORY PROJECT
36. Izinria Sdn. Bhd. MPI Pemuliharaan Rumah Api Pulau Undan, Melaka
37. JI - Auto Sdn. Bhd. UT, RT Ben Ching Rotunda Column, 32760 LIT Aluminium Tanker
38. JML RT 6532001104, ZNB4
39. Jord Malaysia RT
C 6156, E 2310, E 2417, C 6265, C 6137 , Saih Rawal CPP CRM Feed Project (C 6121) ,E2503 - Maximized Gasoline Mode for RDCC Gluten Drier #4 Replacement, Safaniya Project, Saih Rawal CPP CRM Feed Project, Donggi Gas Facility Development, Munchai Compression Station Project, Master Gas System Expansion Project - Saudi Arabia / Aplng Project, Matindok Gas Development Project (Ppgm) - Matindok Block Station, Muchai Compression Station Project
40. Karisma Synergy Sdn Bhd MPI Covered Walkway and Bridge Between UCA Building & LIUMB Building, MLNG restoration of BFW Capacity
41. K- Two Steel Construction Sdn. Bhd. UT, MPI KLEC, 4 Season Hotel , Second Floor Plan Elevation "A", "B" & "F", KL Eco City, Waise Cooler, WQT / WPS, Proton City, Pavilion At Podiumm Level
42. KNM Exotic Equipment Sdn. Bhd. PMI
K 1409080-24 Reactor Low Alloy, SS & Cladded Thk <50mm(332) for Rapid-P3, K 1504052 , KEE 1504053(1211/1212-V-005/006/101/201) 12 Cladding DrumsforRapid-P2,
43. KNM Process System Sdn. Bhd. PMI 1211/1212-C-008 & 1211/1212-C-001
44. Laksamana Trading and Services PWHT, RT,
MPI, HT LTS/17/1064
45. Lafarge Cemment UT , MPI , DPI ,
UTG
CM 7 SD, CM 4 – Shutdown, RK 3 Shutdown 2015, Cooler Spillage Conv. Shaft, Kiln PH Fan B Bolt & Circumstances,, Stoppage, CM3 SD, CM5 Mill Body And Mill Head Thickness, Measurement, LK2 Shutdown 2015 RK3 Shutdown, 2012 & 2013 Blanket UT/MPI Inspection, Cement Mill 5 & Roller Press Rottor Shaft, Coal Mill Gear Box
46. LYL Engineering NDT Works Shutdown (HPU Absorbers Vessel V-500A)
47. Mazlan Engineering DPI Open Shelter at PPTSB
48. Metal One Inspection RT EPCC for BNJT-K & TTJT-A Wellhead Platforms (WHP)
49. Mechzoneplus Sdn Bhd MPI Da Mcp Bundle Frame, Mcp 6 Cylinder Bundle Frame / Mk Vi Bundle Frame, Da Mcp Bundle Frame
50. Mott Macdonald DPI 2-Car Monorail Condition Assessment
51. Mitrajaya Homes MPI Beam Foundation Tower Crane
52. Muhibbah Engineering Berhad Supply UT, MPI
Technician 0006/15 OPHIR Project
53. Muhibbah Steel Industries Sdn Bhd UT , MPI , RT , NDT Fulltime
(UT/MPI)
OPHIR (0006/15, RGTEC, Welder Qualificatin Test (WQT) Fender Shibata (WQT), Rgtech Project, Acid Plant, Westport, Ramlift Viii And IX - Piling Barges, Cibas
54. MSI Venture Sdn. Bhd. DPI T 793, EPCC for South Acis Satellite (SA-SA), Trial Order Main Tank 30MVA Spec 203
55. MSUL Maintenance Sdn. Bhd. DPI, PMI, RT
WQT, Replace Corroder Pipe/Line 1" LPG-292383 1117Y N1 & 1" DOC - 292156 1117Y N1, Supply Fabricate & Deliver Stainless Steel Pipe PE-1-R-200, Noozle Flange Replacement at E-28204 & E-28206, Air Foam Chamber, Associated Piping A-24304 S4a/S4b Rubber Lining Degraded & To Replace Corroded Pipe at V-21112 Petronas Penapisan (T) S/B To Replace Corroded Pipe Petronas Penapisan (T) S/B
56. MTC Engineering Sdn Bhd PMI OPHIR (Flare System)
57. Multi Max Ventures DPI, HT Slew Drive Shaft, MAAG Gearbox Casing
Section 6, Page 8 of 13
________________________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
EXPERIENCE - YEAR 2007-2017 ( Page 5 )
NO CLIENT CATEGORY PROJECT
58. NDE Consultancy Services Sdn. Bhd. RT Huntsman TK 422 Acid ORE Piping
59. NKAY Enterprise (Teliti Teknik
Resources) Visual ,DPI
Projek Bekalan Air (Trusses Temau) , Projek Bekalan Air (Trusses Kecau)
60. Ocelot Services RT SGL Carbon Sdn Bhd (Pipeline Gas)
61. One Union Engineering UT ,MPI Empire City R5/5A
62. Paras Saksama Sdn Bhd NDT
Tank Bottom Plate 100% & Pipe, MKK-MM II- Kaneka Tank Bottom, MKK MM II Field Assembly Tank T-2150, V-2321A & V-2521A, M-270 / MKK MMII, MBS M-270, MKK MMII Bottom Plate T-2150, Kaneka IW-Tank 3, IW3 Tank, MBS-M270 IW4 Tank, Kuantan Port New Seep Water Terminal (Phase 1A & 1B), MM LI - DAF Slunge Pump Installation Work, WQT for FPG Oleochemical Shutdown, Ester Dryer Optmization (EDO) Tank Bottom Plate 100% & Pipe, MKK-MM II- Kaneka Tank Bottom MKK MM II Field Assembly Tank T-2150 , V-2321A, IW3 Tank, T-1250, Tank 2321, IW4 Tank, MSM Utility Piping, NAOH
63. Petala Unik Sdn Bhd MPI MRT Project, Project Mass Rapid Transit Laluan 2
64. Pharmafood DPI,RT SS316l 5000L PW Tank , SS316L 5000L PW Tank (F-2093-03) Dense Phase Pot, EP 213, EP 223, EP 303, Evaporater Buffer Tank
65. Polyfine Engineering MPI, DPI, UTG
Steam Drum 1000 Ltr, Tube Sheet (Boiler), Pressure Vessel Vickers Hoskins Steam Boiler PMD 2619, PMD 14588 Steam Boiler (PMD 14588), Boiler Repair JH PMD 1270 Steam Drum 1000 Ltr, Tube sheet (Boiler), JH PMD307 (Thermo Heater), Jangdah Garment, JB Cocoa, Ramatex Textile
66. Principle Perspective Engineering Sdn
Bhd NDT
Pavillion Hotel, Structural Steel works For Furnace And Boiler, Economizer & Silds, Cypark WTE, Lukut
67. RCR Asia Sdn Bhd HT NGB Chandra Asri Project
68. RFZ2 Engineering Sdn Bhd RT MIV Top Cylinder
69. Samsung (M) Sdn Bhd RT, PWHT, MPI, DPI
TGAST, TGAST Project
70. SSF Maju Resources PWHT Compressor Discharge Piping Spool
Section 6, Page 9 of 13
________________________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
EXPERIENCE - YEAR 2007-2017 ( Page 6 )
NO CLIENT CATEGORY PROJECT
71. Seremban Engineering Berhad NDT Works
Air Receiver & Softener Tank, PT. Sari Dumai Sejati, A16001 (Favelle Favco Crane(M) Sdn Bhd), A 16002 & A 16004, KUANTAN RESIN PLANT (KRP), A16006, A6007 & A16006, 16/00871/LCHJ & WQT, Kuantan 2nd Crystex (K2C) Project, Kuantan Resin Plant, 16/00195, 16/00196, Vertis (K5CD) 16/00872, 16/00814, 16/01003, 16/00863, Petronas Rapid Project-Package 14, Jaewon Frontier, 16/01002 PLCH, 16/00863 PLCH, 16/00991 LLTL, 16/00995 LLTL, 16/00998 LCSY, 16/00842 PLCH, 16/00863 PLCH, Polynt Condensation (16/01002PLCH) MHI Project16/00927 PCSY, Ammonia Absorber (16/00861) , Ammonia Storage Tank (16/00862), Petronas Rapid Project & 17/01202 , Maputo Power Plant, Dialog (16/00841 Plch) , Dialog (16/00844), Desmet (16/01077, 16/01078, 16/01079) , Desmet (MKK) Jurong Engineering Limited, JOMKU - 15/00456/PLCH PMT 107588 - Air Compressor, EPCC FOR BNJT-K & TTJT-A Wellhead Platform, Intermediate Condenser (37E06), Rotating Heat Exchang, Ve513/B3004, On Air Receiver & Softener Tank Shell Refining Co Ovivo Singapore, Ball-Mill 17 , Ball-Mill 8, Thickness Check For Reactor R-77, IOI Loders Croklaan Oils, Shell Sdn. Bhd, Fuji Oil / Alkoxylation Project, Boiler Tube Replacement Work, Flange Modification Work, Croda Singapore / Alkoxylation Project, Ovivo Singapore Pte Ltd, Sdrfo, Shell Tube Bundle, Tarjun Bdi / Jaewon Frontier
72. Stam Engineering Supply QA/QC
Inspector
IB Tower (Roof Steel Structure), IB Tower (Steel Works For Penthouse)
73. Steelcon Heat Transfer Equipment (SHE)
NDT Works
SHE 05/15 - Clean Fuels Project Kuwait Mina Abdullah Refinery Welding Procedure Specification (WPS), Torboserves New Skid Update Project, SHE 02/15, SHE 14/15, SHE 05/15, SHE 02/15,, WPS SHE 03/15, WQT, SHE 02/16, WPS, SHE 13/15, 25 Operating EDH38 Cyclones, 2 Blanks HESS Bergading FSO EPCIC North Malay Basin, Replacement Tube Bundle 2E306 (Biodiesel Plant Section II) SHE 05/15 - Clean Fuels Project Kuwait Mina Abdullah Refinery, Welding Procedure Specification (WPS) Torboserves New Skid Update Project, Kaombo Project, Sohar Refinery Improvement Project, Hydrocyclone Decolcing Vessel Coke Drum Structure Package (CDSP), Biodiesel Plant Section
75. Syarikat Steelcon Sdn Bhd (SC) NDT Works
SC 07/15 - Cold Collector , SC 09/15 & SC 07/15, Danghara Refinery, Toji Osiyo, Petronas, Floating LNG 2 Project (SC 09/15) & Unit 53 Regeneration Gas Heater (53-E002), SC-01/16 - BIH 708, Regeneration Gas Heater, Sc-01/16 - BIH 708, Sc-01/16 Inlet Outlet Manifold, (P 3261) SC 04/16 - Ruwais Train 1 & 2 Process Furnace Upgrade , SC 02/17 , HP3 Seal Gas Conditioning System for BHP Pyrenees FPSO(P3374), Jobs Expansion Project SC 04/17 , Chandra Asri Petrochemical (SC 05/17) , Mekpco Methanol, SC 01/17 & SC 04/17 , SHE 02/15, Clean Fuels Project Kuwait, Torboserves New Skid Update Project (SHE 10/15), Shah Deniz Stage 2 Project, EPCC Of New Fuel Gas Heater For Kimanis, Power Plant, Esterification Plant / Emery Strawberry, Dssb-Senawang Test Skid Project (Piping Modification), Michelago Compressor Station Project / WPS, Taipo Gas Production Plant,Hongkong, Esterification Plant / Emery Strawberry-3 Project, P3204 Jangkrik Complex Project, Fabricated Beam For Radiant (BIH 698) , Shah Daniz Stage-2 Project (BIH 685), Spreader Beam, Central Area Field Complex Project (BIH 698),, Petrojarl Knarr Fpso Project, Sipitang Lateral Gas Pipeline Project Bih 685 Shah Deniz Stage 2 Project, Petronas Floating LNG 2
Section 6, Page 10 of 13
________________________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
EXPERIENCE - YEAR 2007-2017 ( Page 7 )
NO CLIENT CATEGORY PROJECT
76. Taner Industrial Technology (M) Sdn
Bhd RT, ASME
Certification P002 - ASME DEMO VESSEL , WQT , WPQ
77. Technofit Sdn Bhd NDT,PWHT For DOSH
Project Boiler, TNB Janamanjung Power Plant, Perak
78. Tenaga Tiub UT , MPI , DPI , RT
Retubing Heat Exchanger, Welding Qualification Test (WQT) E-174 Retubing Works, Engineering. Procument, Fabrication And Delivery Of Water Cooled Heat Exchangers At Gpp2. Gpp3 &, Gpp4. Gas Processing Kertih (GPK) Terengganu, Secondary Superheater Coil KR2 Boiler, Boiler 35 Ton (Steam Drum & Water Drum), Sour Water Stripper Reboiler (E-34201), Test Ring (TT 15084), Gas Cooler & Dummy Shell, Fabrication Patch Plate Dummy Shell, Pgeo10 Project, Water Sripper Reboiler (Retubing) Proplyene Gas Cooler
79. Tensioned Fabric Structure (M) Sdn
Bhd MPI Geodesic Dome at Marina Pengkalan Gawi
80. TMM Engineering Services Sdn Bhd RT, DPI, UT,
UTTM
EPCC of Flare Recovery System Hot tapping for PCSB/PGB , Sectional Pipe Replacement On KP 72.48 NPS 36 PGU II , Provision of Chemical Injection Facilities, GPS WQT-TMM-075-R1/16 & WQT-TMM-075-R2/16
81. Total Dynamic Sdn Bhd RT WQT
82. Tonica Sdn. Bhd. NDT Jimah Power Plant
83. Toshiba Power Services Corporation NDT TNB Tuanku Jaafar Power Station, PD2
84. Tuck Sin Eng. & Const. NDT Fulltime
(UT)
P14 Dormitary Cabin Module, Underground Works For Mrt Semantan To Maluri, Mapei Dry Mixing Plant Nilai, Malaysia Garden Plaza Sky Brige, Sakura (Furnace Feed Transfer Tower), Sakura (Ferro Alloy Hfce-Simn Smtelter Complex)
85. TWI ABM Training & Certification RT
WQT - TWI ABM Kuala Berang, WQT - TWI ABM Tesdec,), WQT - TWI Abm Kuala Lumpur, WQT - TWI Abm Kuala Berang WQT - TWI Abm Tesdec, WQT - TWI ABM Timur, WQT - Baktkon Skill Academy, WQT – Tesdec, WQT - TWI ABM/CIDB JB, WQT - True Vision Eng S/B
86. Varsel Engineering & Services Sdn Bhd UT, MPI 16-0004 PCFK - To Rebuild 2" , 900# Valve, Pipe Spool
87. Victor Buyck
UT , MPI , RT, NDT Fulltime
(UT/MPI)
1172 TZM Project, 1167 TGAST Project, Welding Procedure Specification (WPS), 1162 Aesthetic Guideway Envelope Subang Jaya, 1179 - Gelukor Power Station, Plenum 9E, GT2, 1175 (WPS-VB-1SO-16-01 & WPS VB28), 1163 - Sabah Ammonia Urea (Samur) Project, Prasarana - 1162
88. Welfab Eng UT , MPI, DPI, RT
J01779 - Turning Tool, J01762 - Piping & Flore Boom, J0 1762 Tool Box - CC030, CC041 - Oxygen Rack 045, 032, 046, 042 - Acetylene Rack, 034, 047, 048, 033, 050, J01772, J0 1838 TR-Rail 13.2M, J0 1838, J01908, J01920 & Welding Machine , JO 1926, JO 1925 & GAS RACK 072, 073, 076, 068, 070, 075, J01779 - Turning Tool, J01762 - Piping & Flore Boom, Pull Through Test Bed, Modification Of Par Bridge-Option B (SKD T-20), Steel Supply For Radiant Barrier (Acean America), Par Pin Mount AT Guntong-C (SKD-9), HP Test Head
Section 6, Page 11 of 13
________________________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
EXPERIENCE - YEAR 2007-2017 ( Page 8 )
NO CLIENT CATEGORY PROJECT
89. Yi Tat Precision Eng. DPI Malaysia Distribution Centre Service Platform
90. Yong Nam Engineering Sdn. Bhd. NDT Dubai Metro Roof Structure
91. Yuen Fee Engineering NDT Works
Pengerang Cogeneration Plant, P/15/120, P/16/013, A/16/001 Flange Filter House FSIS, SC 069 Air Receiver, A/16/039 (Steel Hawk), JJ LURGI, P/16/046 (KNM), K1504052 (KNM) & Air Receiver, K1504052 - Petronas Rapid Pengerang Package 2, CDU, ARDS & HCDU Units, MHI Project, Genting SOA , A/17/014 P/17/018, P/17/028 , Bantem Indonesia Power Plant, A/16/059 Central Jaya (P/16/070) , WQT , A/16/059, A/16/059, P/16/070 & AIR RECEIVER (A/17/Q3M & A/17/032), P17002 BAT 7 Package, P/171027, A/17/039 (Steel Hawk), Low Cost of Chemical Injection Skid, Hardpiping and Hose (P/171028), Gambat South - Nitrogen Storage Tank, Skid #1 (Instrument Air) & Skid#2 (Air Treatment), Design And Engineering Service SKO Pipelines And Facilities Rejuvenation Project, Bangka Subsea Installation, Carbon Steel Air Receiver 7000 & 15000 Liters, Chemical Injection Skid - Solar Tank, Clppl Project, Clutch House Bat 6 & 7, Gear House Bat 7 & Gear House Rotating Table, Air Receiver 1500 Liter & 3000 Liter (A/14/0027) , Cluster 7 - Hang Off Collar (P/14/0063) , Chemical Injection Skid, Organo Project & Boustead Salcon, Malampaya Asset Integrity Project, Petronas LNG – 9, Petronas LNG - 9
92. Jimah O & M Sdn Bhd NDT Works Unit 2 Minor OH 2017 – Reheater Tube Hardness Survey
93. Thye Heng Engineering Sdn Bhd NDT Works Level III & NDE Services for ASME Certification (U-STAMP Audit)
Section 6, Page 12 of 13
________________________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
EXPERIENCE - YEAR 1998 - 2007 ( Page 1 )
NO CLIENT CATEGORY PROJECT
1 Akra Engineering Sdn Bhd NDT Pressure Vessel & Steel Structure Fabrication
2 Advanced Boilers Sdn Bhd NDT Boiler Manufacturing & Repair
3 Ahmad Zaki Sdn Bhd NDT Putrajaya Mosque Steel Structure
4 All Pipe Technology Sdn Bhd NDT Water Pipe Manufacturing
5 Amerstar Corp. Sdn Bhd NDT Petronas Gas GPP 5&6 Shutdown
6 Amisan Products (M) Sdn Bhd NDT For
DOSH Project Boiler Repair
7 Angkasa Jasa Sdn Bhd NDT KLCC Exhibition Centre Steel Structure
8 Aqeel Engineering Sdn Bhd NDT Petronas Shutdown and Maintenance Work
9 Atlantic Steam Engineering Sdn Bhd NDT Boiler manufacture, repair and maintenance
10 Asia Port Trading Co. Sdn. Bhd. NDT Gantry Crane NMB-ABB Trolley Rail Repair
11 Aarding Thermal Acoustic Netherland Inspection Dung Quat, Vietnam, Petronas Methanol, Malaysia
12 Associated Pan Malaysia Cement NDT For
DOSH Project Survey & Inspection of 109 Units of Air Vessel
14 Benova Mechanical Engr. S/B NDT Steel Structure Fabrication
15 Ban Lee Hin Sdn Bhd NDT NEGM-M1-T Fiber Steel Structure Erection
16 Best Build Sdn Bhd NDT Universiti Teknologi Petronas Steel Structure
17 Boon & Cheah Steel Pipes Sdn Bhd NDT Spiral Water Pipe Manufacturing
18 Bromma (M) Sdn Bhd NDT ZPMC / Patrick Terminal
19 Brown & Root Engr Ser. Singapore Inspection Trenergy FPSO Masa Development Project
20 BBR Construction System (M) S/B NDT Cable Car Steel Structure Langkawi
21 Carsten Ranico & Partners (M) S/B NDT Mud Skip Turner Equipment
22 Campbell Asia Pacific Sdn Bhd Inspection MLNG Tiga, Petronas
23 C H Steel Sdn Bhd Inspection TNB Manjung Power Plant.
24 Carimin Sdn Bhd Inspection EPMI OFD Offshore Platform, Terengganu
25 CBI Singapore NDT Storage Tank, MTBE, Gebeng
26 Central Glass & Alum Sdn. Bhd. NDT KLCC Exhibition Centre Steel Structure
27 Cleveland Bridge & Engineering SB NDT TNB Manjung Power Plant Steel Structure
28 Cooperheat (M) Sdn Bhd NDT Back-up Barge Leg, Muhibbah Engineering
29 Carpet International (M) Sdn Bhd NDT For
DOSH Project Boiler FMD Inspection
30 Desa Nikmat Sdn. Bhd. NDT Tuanku Jaafar Power station, PD2. Rehabilition
31 Dayang Enterprise Sdn Bhd NDT EPMI Offshore and Onshore Project
Petronas Carigali Onshore and Offshore Project
32 Dian Kreatif Sdn Bhd NDT Conference Palace Hotel, UAE
33 Eka Raya Sdn Bhd NDT For
DOSH Project Aeroform Factory (Boiler PMD 1625)
34 Eastern Soldar Sdn Bhd NDT Johor-Singapore Gas Pipeline Project
35 Equator Engineering Sdn Bhd NDT Petronas Fertiliser Kedah (PFK) Kedah
36 Ethylene Polyethylene (M) Sdn Bhd NDT Plant Maintenance
37 Excel Oilfield Manu. Services Sdn Bhd NDT EPMI Pipe Spool
38 Finematrix Projects Sdn. Bhd. NDT Ima-655 Port Tanjung Pelepas Gantry Crane
40 Freyssinet PSC (M) Sdn Bhd NDT Fly-over bridge Penang
41 Favelle Favco Crane (M) Sdn Bhd NDT Offshore Crane Fabrication
42 Guardian Mint (M) Sdn. Bhd. NDT Petronas Core Crusher Rotor
43 Hock Leong Engineering Sdn Bhd NDT Kompleks Penjara (JAWI) Pulau Pinang
44 Haven Engineering Sdn Bhd Inspection Petronas Carigali S/B Hook-up & Comm.
45 Herrenknecht (M) Sdn Bhd NDT SMART Project Steel Structure
46 Hexagon Tower Sdn Bhd NDT NPK Fertiliser Plant, Kedah, Piping
47 Hiap Aik Construction Sdn. Bhd. NDT Pacific Bank Headquarters Building Project
Section 6, Page 13 of 13
________________________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
EXPERIENCE - YEAR 1998 - 2007 ( Page 2 )
NO CLIENT CATEGORY PROJECT
48 Haven Engineering Sdn Bhd NDT Terengganu Offshore Maintanace
49 Herrenknecht (M) Sdn Bhd NDT SMART Project Steel Structure
50 HRA Teguh Sdn Bhd Inspection TNB Tuanku Jaafar Power Plant PD2
51 Hexagon Tower Sdn Bhd NDT NPK Fertiliser Plant, Kedah
52 Hiap Aik Construction Sdn. Bhd. NDT Pacific Bank Headquarters Building Project
53 Impsa Malaysia Sdn. Bhd. NDT Bakun Hydroeletric Plant
54 Ikatan Innovasi Sdn Bhd NDT Putrajaya Gas District Cooling Plant, Package 3
55 Instinct Engineering Sdn Bhd NDT Segmental Lifter for Jalan Duta Bridge Project
56 Jiwa Harmoni Offshore Sdn. Bhd. NDT Tanjung Bin 3 x 700MW Coal Fired Power Plant
57 Jitu Fluid Engineering Sdn Bhd NDT For
DOSH Project Boiler Piping
58 Jaques International Sdn Bhd NDT ST 48 Crusher Quarry Plant
59 Josu Engineering Sdn. Bhd. - Mega Steel Extension
60 Kilang Gula Felda Perlis NDT For
DOSH Project Shutdown Nov 2007
61 Kuala Ibai Properties Sdn Bhd NDT Pipeline Project
62 Kudrat Maritime Sdn Bhd NDT Ship Repair
63 Kvaerner Process System AP S/B NDT Resak Onshore GasTerminal Petronas Carigali
64 Kumpulan Juruteknik Sdn Bhd Inspection EPCC of Singapore Gas Pipeline Project
65 Local Engineering Sdn Bhd NDT Petronas Gas Shutdown and Maintenance Work
66 Lafarge Cement Plant, Langkawi NDT For
DOSH Project Inspection & Survey of Pressure Equipment
67 Master Ind. & Marine Coating S/B NDT For
DOSH Project Shutdown at Nestle Factor, Shah Alam
68 Mega Steel Sdn Bhd NDT Mega Steel, Phase 1
69 Mechzoneplus Sdn. Bhd. NDT MOX MK 5 Bundle
70 MSET Corp. Sdn Bhd NDT Ship Building, Pressure Vessel, Piping
71 Mox Gases Sdn Bhd NDT NDT On Liquid Nitrogen Tank
72 Namfatt Fabricators Sdn. Bhd. NDT TNB Tuanku Jaafar Power Plant PD2, Jimah Power Plant
73 Newwin Engineering (M) Sdn Bhd NDT Petronas Gas Shutdown and Maintenance Work
74 Nusantara Technologies Sdn Bhd NDT Resak Onshore Gas Terminal, Petronas Carigali
75 NDE Consultancy Sdn. Bhd. NDT RT of Test Piece for Welding School
76 Negeri Sembilan Cement Industries S/B NDT For
DOSH Project Raw Mill Shutdown Work
77 Pakaruji Sdn Bhd NDT Air Products Wesport H2 Plant, Cargill Plant, Klang, Coil Exchanger-Air Product, Piping - Air Product Westport H2 Plant
78 Perusahaan Otomobil Nasional Berhad NDT For
DOSH Project Inspection & Survey of Air Tank at EON Plant
79 P-Tech Engineering Sdn. Bhd. Third Party Preparation and Conducting WPS & WQT
80 Pipeway Industry Sdn. Bhd. NDT Water Pipe Manufacturing
81 Permint Engineering Sdn. Bhd. Inspection Pertonas Aromatic KR2 Project
82 Polyfine Engineering Sdn Bhd NDT Boiler Repair & Maintenance (DOSH)
83 Prescan Sdn Bhd NDT Kerteh MEOG Project
84 Protank Tech. Sdn Bhd NDT Tioxide Shutdown
85 Ranhill Engineering & Const. Sdn Bhd NDT Petronas Penapisan Trg. Shutdown Work
91 Stamsteel Sdn Bhd NDT Johor Port Steel Structure, Melaka Trade Centre Steel Structure
92 Sum Poh Sdn Bhd NDT For
DOSH Project Skyway Goh Tong Jaya, Wisma Genting, KL, Genting Highland Recreation Park
93 Sin Soon Hun Sdn Bhd NDT Docking Guide 22'' Clamp Connector
94 S.M. Liew Engineering Sdn. Bhd. NDT Structure Support for Mud Tank/ Diesel Tank
95 Setech Engineering Sdn. Bhd. Third Party Preparation and Conducting WPS & WQT
96 SSEC Engir. & Construction (M) S/B NDT Tuanku Jaafar Power Station, PD. Rehabilition
97 Sunway Construction Berhad NDT KLCC Exhibition Centre, Sunway Pyramid II, Main Building Works
Section 6, Page 14 of 13
________________________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
EXPERIENCE - YEAR 1998 - 2007 ( Page 3 )
NO CLIENT CATEGORY PROJECT
98 Seremban Engineering Sdn Bhd NDT For DOSH
Project ASME U Stamp Pressure Vessel, PED Pressure Vessel Project, Boiler Repair
99 Syarikat Steelcon Sdn Bhd NDT
Ar- Razi Plant V Methanol, Turkmenistan Block 1 Development, Segamat Compressor station Expansion Protect, Jamnagar Refinery Gujarat India, EPCC Sumandak Selatan Platform, Alinta Thailand Bass Gas, Born Canada TPX Revamp Project, Dung Quat Refinery Project Petrovietnam, EPPC Sumandak Selatan Platform (SUPG - B), FPSO East Fortune, John Zink Asia Pacific, Mala Satellite Sudan - Package MS2, Megasteel Plant, Banting, Petronas Penapisan Melaka Lube Base Oil, Northern Fields Bunga Orkid, PT Pertamina EP Region Jaya, Tiptom West Developtment Project, PT Sempec, Born Canada, West Seno Retrofitting, East Berlumut Gas Compressor / Dryer Skid, Dow Kuwait (Stack & Steam Superheater), Pearl Qatar Shell (Gas to Liquid Project)
100 Sum Poh Sdn Bhd NDT For DOSH
Project Sky Venture Genting Highland
101 Tenaga Tiub Sdn Bhd NDT Boiler TNB Kapar
102 Technip Geoproduction (M) Sdn Bhd NDT Kerteh PVC Project
103 Technotest Engineering Sdn Bhd NDT Petronas Gas GPP 6
104 Teknispek Sdn Bhd NDT Petronas Carigali Offshore and Onshore Project
105 Tioxide (M) Sdn Bhd NDT Plant Maintenance
106 TMM Engineering Sdn Bhd NDT EPMI TCOT
107 Tractor Malaysia Sdn Bhd NDT Putrajaya Gas District Cooling Project
108 Torsco Berhad NDT
Inspection TNB T. Jaafar Power Plant, PD2. Port Dickson, Heat Exchanger Fabrication
EXPERIENCE - YEAR 1998 - 2007 ( Page 4 )
NO CLIENT CATEGORY PROJECT
109 Tucksin Engr. & Construction SB NDT Steel Structure Fabrication, Tanjung Pelepas Port, Johor, Sepang Formula 1 Circuit Project, Primaland KL & Mid Valley Mega Mall Project, SIRIM Bldg., YTL Cement MAS Hanger
110 Utama Steel Works Sdn. Bhd. NDT Water Pipe Manufacturing
111 UMW Advantech Sdn Bhd NDT Reactor R 14108 AT BTX Plant
112 Velosi (M) Sdn Bhd NDT EPMI DPD Retrofit, KSB, Kemaman
113 Vickers Hoskins (M) Sdn Bhd NDT Putrajaya Project
114 Vision Three Steel Detailing Inspection Steel Structure for Washington University
115 Victor Buyck Steel Construction S/B NDT
Sidra Tree, Qatar, TNB Port Dickson Power Plant, Petronas Peanapisan Melaka HRSG, Petronas Methanol Labuan, Talisman Bunga Raya-A Platform Structure, Keystone Cement Plant, University Technology Petronas Structure, Kuala Lumpur Convention Centre Structure, Polysius Bouskouver, Aarding Pinjarra Co-Generation Project, Ikea Damansara Complex Steel Structure, Panglima CCGT Power Plant Steel Structure.
116 Wong Heng Engineering Sdn Bhd NDT PFK GE CO2 Cooler
117 Warga Hikmat Kejuruteraan Sdn Bhd NDT Seal Klush Cooler For P - 1109, E – 11, Surface Condenser 2C - 600- ELS
118 Weladin Engineering Services Sdn Bhd Inspection Petronas Carigali, Resak Pipeline, Angsi Jacket
119 Yew Lee Blasting Sdn. Bhd. NDT for DOSH
Project Nestle Silo No. 2, Nestle Factory, Shah Alam
120 Yong Nam Engineering Sdn. Bhd. NDT Tanjung Bin Power Plant, Dubai Metro Roof Structure
121 Yuen Fee (Wan Soon) Engineering SB NDT Pressure Vessel & Steel Structure Fabrication, Crane Fabrication
122 Yuen Tat Gas Engr. Works Sdn Bhd NDT for DOSH
Project Boiler Repair, NGV Gas Metering Station Piping Works
123 Zelleco Engineering Sdn. Bhd. NDT Tanjung Bin Power Plant, Changi Airport, KTM Double Track Steel Structure, Monorail Putrajaya Steel Structure, Hercules Main Boom & Pedestal Crane
Section 7, Page 1 of 6
_________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Section 7
SCOPE OF SERVICES
Global Inspection Sdn. Bhd. (Formerly known as Global Inspection Services Sdn. Bhd.) is an inspection and testing agency offering a complete range of Non-Destructive Testing Services, Technical & Professional Manpower Supply services, Engineering Inspection and Expediting, WPS Qualification and Heat Treatment (localize & furnace). Global Inspection Sdn. Bhd. assure its clients reliable testing by means of the latest up-to-date techniques and modern equipment. Its clients avoid the expenses of training and employment of special skilled personnel, who may not be fully utilized, and the purchase and maintenance of expensive testing facilities, which may be rapidly out-dated. Global Inspection Sdn. Bhd. performs NDT test in manufacturer workshop and fields construction sites where structural building, factories, power plant, refineries and industrial plants are being built, operated and maintained. Teams of skilled technician fully trained and holding qualifications to local and/or international standards are sent to the test site with all the necessary equipment and materials. In particular, our technicians are fully familiar with the following code and standard pertaining to our testing and inspection requirements: MS, BS, EN, AWS, ASTM, API, ASME and Swedish Standard. If a particular testing method is not specified, Global Inspection Sdn. Bhd. technical personnel are available to give impartial advice concerning the technical and economic considerations and the method that will be of the greatest advantage to client.
Section 7, Page 1 of 6
_________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
PROVISION OF NON DESTRUCTIVE TESTING The objective of these services is to test by different methods to certain properties of materials that cannot be determined by other means such as visual examination or direct measurement. Since the material tested will later be used in actual service, the testing methods must in no way destroy them. The results of the tests are compared with the contractual specifications and / or the applicable codes and standards. Field of Applications
Non-Destructive Testing can be performed on a number of different materials, but are required mainly for testing metallic parts such as forgings, casting, and welds of fabricated structures, pressure vessels, boilers, pipelines, storage tanks, ships, and offshore platforms. Critically, stressed components such as pressure vessels, boilers, and parts for aircraft, in which imperfection could lead to accidents, failure in service or reduce efficiency. For example, metal casting and forging, tubes and piping, and especially the welds between components, are tested to ensure that they do not contain potentially dangerous irregularities and flaws. Other tests are made to check corrosion properties such as electrical or thermal insulation, and possible leakage of liquid and gases. Range of Testing Services
Radiography Testing (RT)
Magnetic Particle Inspection (MT)
Dye Penetrant Inspection (PT)
Ultrasonic Testing & Inspection (UT)
Hardness Testing (HT)
Positive Material Identification (PMI)
Heat Treatment (HT)
Post Weld Heat Treatment (PWHT)
Ferrite Test (FT)
Advance NDT (Phase Array & TOFD)
Section 7, Page 1 of 6
_________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
1. Radiography Testing (RT) Radiography is a method of non-destructively inspecting components and assemblies that is based on the amount of radiation the part being inspected absorbs. Because of differences in material density or variations in wall thickness or material composition, the test piece absorbs different amount of radiation, and allows different amount of radiation to pass through it to reassure. In this particular case, the piece being inspected is a metal plate of uniform thickness, containing an internal flaw that has absorption characteristics different from those of the surrounding material, and therefore allows a different amount of radiation to reach the recording medium (in this case is a film).
2. Ultrasonic Testing (UT)
Sound is produced by a vibration body and is itself a mechanical vibration of particles about an equilibrium position. Particles in a material do not move through the medium, rather the energy produced causes the particles to vibrate and this acoustic energy travel progressively through the medium in which it is traveling. It is reflected as an echo. This is the basic principle of ultrasonic inspection. The major of non-destructive testing (NDT) application of ultrasonic include flaw detection, thickness measurement, and characterization of metallurgical structure. Two major modes of vibration are extensively used for NDT compression (longitudinal) wave and shear (transverse) wave. Compression wave is the type of sound that the particles vibrate parallel to the direction of wave propagation. Shear wave can be visualized as a sinusoidal propagation through a medium in which the particle motion is transverse to the direction of the wave propagation. Compression waves can propagate in solids, liquids, and gases. Shear waves, however, cannot be supported in all media and are limited to solids.
Section 7, Page 1 of 6
_________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
3. Magnetic Particle Inspections (MT)
Magnetic Particle Inspection involves a ferromagnetic material and placing iron particle on its surface. Defects in the magnetized area disrupt the magnetic field and iron particles are attracted to these anomalous areas. Iron particles highlight the defect and enhance defect detection. Magnetic fields are produced in ferromagnetic materials such as iron, nickel, cobalt, and some of their alloys by the alignment of the molecular magnetic domains in material. Orbiting electrons, which produce a magnetic field with the specific alignment for each molecule, creates the magnetic domains. Once magnetized, a ferromagnetic, material will attract other ferromagnetic materials. In order to demagnetize the material, the molecules must be forced back into a random orientation.
4. Penetrant Inspection (PT) Dye or liquid penetrant inspection is a method of detecting and indicating surface discontinuities in relatively non-porous material. Penetrant seeps into a discontinuity and after the penetrant on the surface has been removed, a developer is applied that draws the penetrant out of the discontinuity (by capillary) action) and provides an indication of the flaw by contrasting it with the unbroken background. The objective of the dye penetrant method inspection method is the detection of surface discontinuities (cracks, porosity, laps, seams or evidence of other surface imperfections) rapidly and economically with a high degree of accuracy. Common dye penetrant inspection methods include both direct visual observation and fluorescent systems where the dye is treated so that it fluoresces and act as its own light source. Dye penetrant inspection is one of the best methods for finding discontinuities exposed to surface will permit detection of all but extremely tight cracks provided that they are open to the surface. The dye used in most direct visual penetrant work has a deep red colour that provides a good contrast with the white developer. For fluorescent inspection, this dye produced a yellow-green luminescence when viewed under black (ultraviolet) light.
Section 7, Page 1 of 6
_________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
5. Hardness Testing (HT)
Non-uniform heating or cooling of the tube can result in serious anomalies in the hardness throughout the body of the pipe. In the case of a hard spot, the hardness level is considerably higher than that of the surrounding metal, usually as result of localized quenching. High hardness is often associated with loss of ductility, which can lead to brittle fracture. The problem is more common with large diameter line pipe than with casting or tubing.
6. Positive Material Identification (PMI)
Positive Material Identification (PMI) is the analysis of a metallic alloy to establish composition by reading the percentage quantities of its constituent elements. The object of this nondestructive testing method is to identify metal alloys in place using a portable X-Ray fluorescent analyzer that determines the elemental composition of the material. Positive Material Identification (PMI) is the analysis of a metallic alloy to establish composition by reading the quantities by percentage of its constituent elements. Typical methods for PMI include X-ray fluorescence (XRF) and optical emission spectrometry (OES).
Section 7, Page 1 of 6
_________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
7. Post Weld Heat Treatment (PWHT)
Post weld heat treatment is the most widely used form of stress relieving on
completion of fabrication of welded structures. The principle is that as the
temperature is raised, the yield stress and the elastic modulus of the material
fall. Post Weld heat treatments done after welding/machining to improve the
chemical mechanical properties of weldment / machined surfaces. In concept,
PWHT covers many different potential treatments. A point is reached when the
yield stress no longer supports the residual stresses and some localised plastic
deformation occurs. Post weld heat treatment in the context described here
refers to the process of reheating a weld to below the lower transformation
temperature at a controlled rate, holding for a specific time and cooling at a
controlled rate. The heating can be performed by localised Heating methods or
by the use of the heaters within temporary or permanent furnace installations.
Furnaces of any size can quickly be erected and fired to suite your application
at site using the modular panel technique
Localise
Gas Firing
Section 7, Page 1 of 6
_________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
7. Ferrite Test (FT)
Ferrite testing is low-cost, accurate and fast way to measure delta ferrite
content in austenitic and duplex stainless steels. Proper ferrite content
provides a balance between ductility, toughness, corrosion resistance and
crack prevention. Heat,. A correct ferrite measurement can help to avoid both
solidification cracking and corrosion in stainless steel welds, pipes, plates,
pressure vessels and petrochemical components. When ferrite content is too
high, stainless steel can lose ductility, toughness, and corrosion resistance –
especially at high temperatures. If ferrite content is too low, stainless steel
welds become susceptible to hot cracking or solidification cracks. In duplex
stainless steel welds, a deficit of ferrite content can also reduce weld strength
and contribute to the development of stress corrosion cracks.
Section 8, Page 1 of 6
_________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Section 8
LIST OF EQUIPMENT List of Equipment The operation teams are supported by the following facilities:
Radiography Testing Equipment 1. Gamma ray projector (Ir 192) - 6 sets
2. Survey meter - 12 units 3. Alarm monitor - 10 units 4. Densitometer - 5 units 5. Cutter - 12 units 6. Warning light - 28 units 7. Ropes with radiation warning flag - 18 sets 8. Collimator - 10 units 9. Sign boards - 38 units 10. Long handling tong - 10 units 11. Lead pot - 6 units 12. Lead sheet - 9 rolls 13. Viewer - 5 units
Section 8, Page 2 of 6
_________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Vehicle 1. Site vehicle - 12 units
Magnetic Particle Inspection Equipment 1. Magnetic AC yoke - 15 sets 2. Permanent yoke - 5 units 3. Black (UV) light (Fluorescent inspection) - 2 units
Ultrasonic Testing Equipment 1. Ultrasonic Flaw Detector Panametrics Epoch XT - 6 sets Panamentrics Epoch 4B - 2 sets Panametrics Epoch 3 - 3 sets Sonatest Sitescan D-10 - 6 sets Sonatest Site Scan 110 - 4 sets Krautkramer USK 7 - 2 sets
Probes, cables, calibration blocks, etc. 2. Ultrasonic Thickness Gauge Equipment
Panametrics ultrasonic thickness gauge - 3 sets
Hardness Testing Equipment 1. Portable hardness equipment - 3 sets
Section 8, Page 3 of 6
_________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Positive Material Identification (PMI) 1. Niton portable XRF alloy analyser (equivalent to X-Met) Post Weld Heat Treatment (PWHT) - Localise 1. Heat treatment 50 KVA / 415V, 69A 2. Recorder 3. Thermocouple welder unit (230V) 4. Insulation 5. Thermo couple wire (T/C wire) 6. Welding cable c/w splitter cable 7. Compensating cable 8. Heating elements 9. Male thermocouple Post Weld Heat Treatment (PWHT) – Gas Firing 1. Furnace (12000mm L X 2000mm H X 6000mm W)
2. 50KVA Transformer c/w Individual Programmer 3. Main Trolley
4. Gas Equipment Complete Set
5. Recorder
Section 8, Page 4 of 6
_________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Inspection Equipment 1. Clamp meter 2. Digital thermometer 3. Welding Gauge Advance NDT 1. Phased Array 2. Time of Flight Diffraction (TOFD)
Section 9, Page 1 of 1
_________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Item : UT Set Item : UT Set Brand : Sonatest D10 Brand : Olympus Epoch XT Year : 2010 Year : 2009
Item : UT Set Item : MPI Yoke Brand : Panametrics Epoch 3 Brand : Sonatest MY2 Year : 2007 Year : 2010
Item : MPI Yoke Item : MPI Yoke Brand : Magnaflux Y6 Brand : Gammatec Year : 2009 Year : 2006
Section 9, Page 2 of 1
_________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Item : RT Projector Item : RT Projector Brand : Delta 880 Brand : INC IR-100 Year : 2010 Year : 2009
Item : ASME Flux Indicator Item : Densitometer Brand : Detex Brand : DDS 2 Year : 2010 Year : 2010
Item : PMI Machine Item : Hardness Tester Brand : Niton Brand : Time Year : 2010 Year : 2009
Section 9, Page 3 of 1
_________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Item : PWHT Machine Item : PWHT Furnace Brand : Thermotest Brand : N.A Year : 2010 Year : 2010
Item : PWHT Recorder Item : PWHT Burner Brand : Fuji Brand : Thermotest Year : 2010 Year : 2010
Item : PWHT Gas Burner Item : PWHT Fan Blower Brand : N/A Brand : N/A
Year : 2010 Year : 2010
Section 9, Page 4 of 1
_________________________________________________________________________________________ We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment
Section 9
HEALTH, SAFETY AND ENVIROMENT (HSE) POLICY
Global Inspection Sdn. Bhd. (Formerly known as Global Inspection Services Sdn. Bhd.) conducts its activities by giving highest priorities to the Health and Safety of all simultaneously to protect the environment and not to create hazard to the community. Every employee of Global Inspection Sdn. Bhd. is required to comply fully with the Malaysia legislative requirements and strive continuously and progressively on the improvement of their HSE performance. Global Inspection Sdn. Bhd. HSE policy will be constantly pursued through Company quality management policy through Company strategies and action plans, through visible commitment and sustained involvement of all levels of employees supported by education and training. The following is the Global Inspection Sdn. Bhd. policy:
Emphasize to every individual in the Company that HSE is a high priority in all Company business activities.
Conduct effective planning and asses HSE matters before any job is started.
Provide employees with effective HSE training.
Promote an awareness of environmental issues and apply the best practicable means to account for the environmental impact.
Continuously promote the principle that accidents should be prevented strive for zero accident statistic.
Regulate the principle that all incidents/accidents including near misses must be reported, investigated and recorded.
Provide effective motivation and communication through Quality Management System.
www.globalinspection.my
Account & Commercial Office : No.3, Kawasan Industri, Taman Pinggiran Senawang 71450 Seremban, Negeri Sembilan Tel : 016 316 1888 (General), 018 221 0888(Commercial) Tel : 06 679 7900, 018 222 0888(Operation)
Paka Operation Office : Lot D3, Kawasan Perusahaan Cacar, 23100 Paka, Terengganu Tel : 013 382 8100 Fax : 09 827 2100
Johor Operation Office : 33, Jalan Bukit 9, Kawasan MIEL, Bandar Seri Alam, Masai 81750 Johor Bahru, Johor Tel : 018 222 0888 Tel : 016 392 7888
‘We Provide the Services of Non Destructive Testing, Engineering Inspection and Post Weld Heat Treatment’