Global CASTING Solutions

This document is the property of MEITA Group and the full content of this document is confidential. Reproduction, copying, printing or utilization for any purpose other than agreed is forbidden. Disclosure to a third party is strictly subject to prior written agreement by MEITA.

MT MEI TA Industrial Co. Ltd.NWS DSP MTE GTI WSI DSA STREIT

Global CASTING

Solutions



21.04.21 2

Steel Casting

Iron Casting

MeiTa Industrial Co. Ltd.Headquarter in Taiwan

ASIAEUROPE NAFTA

Taiwan China IndiaFrance Serbia Mexico

STREIT Machining

France

MTE Serbia

STREIT Machining

Serbia

WSI Machines & Fixtures

DSA Automation

ChuangZhen HeatTreatment

(40%)

NWS / DSPChina

GTIIndia

MEI TAMachining

Mexico

S Ir In Al IrS

S

Ir

In

Al

R&D HQ

R&D HQ

Investment Casting

Aluminium Sand Casting

Research & Development Headquarter

Production Facility: Casting & Machining

Production Facility: Machining only

Group Overview

Fixtures, Machines, & AutomationDevelopment & Manufacturing

Heat Treatment



21.04.21 3

1977

1998

2001

2004

2007

2010

2015

2017

2018

NWS DSP DSP

MEI TA MTE MEI TA MXSTREIT EU

GTI

2020

NWS

Creation Mei Ta Group

Entering Turbo-Charger Market

Awarding of first Turbine Housing Project

Investment CastingNew Technology

Aluminium CastingNew Technology

Group Expansion Timeline

Expansion in China (same location as NWS)

Expansion to India (Focus Iron Casting)

Expansion to Europe Cooperation with StreitGroupe (Machining)(now 100% owned by MeiTa Group)

Expansion in Europe (Focus Steel Casting)

Expansion to NAFTA(Machining only)



21.04.21 4

TEAM US

Local Account Management, Logistics & Quality Support

MTE Serbia

- Steel Casting & Machining

MEI TA Group

- Group Headquarter- DSA Automation- WSI Machines & Fixtures

Logistics Warehouses

Local Contact / Global Footprint

MEI TA Mexico

- Machining

TEAM EU

Local Account Management, Logistics & Quality Support

STREIT France

- Machining

STREIT Serbia

- MachiningGTI India

- Iron Casting & Machining

NWS I DSP China

- Iron & Steel Casting & Machining- Aluminium Casting- Investment Casting- R&D Headquarter- Global Marketing & Sales



21.04.21 5

LocationNWS - New Wei San Industries Co. Ltd.

No.2 Jin Fa Rd., Shangmatai Industrial Area , Wu Chin District, Tianjin, P.R.China

GTI - Greentech Industries Pvt Ltd.APIIC Multi produt SEZ, Dwarakapuram village, Naidupeta mandal, SPSR Nellore Dist. Andhrapradesh, India 524421

MTE - MEI TA Europe d.o.o.

Zeleznicka 44v11504 Baric, Obrenovac, Serbia

Facility Access• Tianjin harbour to NWS – 70km• Tianjin airport – 40km• Beijing airport– 112km• Highway access – 7km

• Chennai harbour to GTI – 120km• Chennai airport – 130km• Railway access in Naiupeta – 13km• Highway access NH16 – 13km

• Belgrade airport – 26km• Highway with adjacent entrance to MTE• Railway access in Belgrade – 25km• Highway access ring road – 25km

Employees (end 2020) 7090 3900 3180

Available Technologies

• Iron Casting• Heat Resistant Steel Casting• Investment Casting• Aluminium Casting• Machining and Assembly of Sub-Components

• Iron Casting• Machining and Assembly of Sub-Components

• Heat Resistant Steel Casting• Machining and Assembly of Sub-Components

Product portfolio

• Centre / Bearing Housings• Turbine Housings & Integrated Manifolds• Exhaust Manifolds• Other Iron & Steel Castings• E-Motor Housings and other Al Castings

• Center / Bearing Housings• Turbine Housings & Integrated Manifolds• Exhaust Manifolds• Other Iron Castings

• Turbine Housings• Integrated Manifolds• Exhaust Manifolds• Other Steel Castings

Plant Picture

Major Production Locations



21.04.21 6

MTE Serbia

Production Focus: Stainless Steel (Sand Casting)

Steel Molding Lines• 2 X Counter Gravity Vacuum Pouring• 2 X Adj. Counter Gravity Vacuum & Gravity Pouring

Machining Equipment• ca. 408 CNC Machining Centres (in Production)

GTI India

Production Focus: Iron (Sand Casting)

Iron Molding Lines• 2 X DISA D-230X (Vertical Parting Line)

Machining Equipment• ca. 670 CNC Machining Centres (in Production)

NWS/DSP China

• Global R&D Centre• Protoype Tooling Development & Manufacturing• Series Foundry Tooling Development & Manufacturing• Research Material Laboratory

Steel Molding Lines• 2 X Counter Gravity Vacuum Pouring• 1 X Gravity Pouring• 2 X Adjustable Counter Gravity Vacuum & Gravity

Pouring

Iron Molding Lines• 2 X DISA D-230X (Vertical Parting Line)• 2 X SINTO FCMX Ⅲ (Horizontal Parting Line)• 2 X TOKYU AMF Ⅲ (Horizontal Parting Line)

Investment Casting• 2 X Lines

Aluminium Casting• 1 X Line

Machining Equipment• Ca. 2.000 CNC Machining Centres (in Production)

Materials

Heat Resistant Steels• 1.4849• 1.4848 (+Nb)• 1.4837 (+Nb)• 1.4826 (+Nb)• SCH23• M2528• 1.4740 (ferritic steel)

Low Alloyed Steels• 1.6220 modified

Cast Iron• D-5S • SiMoCr Ductile• SiMo GGV• SiMo+ and SiMo Ductile• Ductile and Grey Iron

Aluminium Casting• Al-Si-Mg alloy• Al-Si alloy• Al-Cu alloy

Investment Casting• Heat Resistant Steels • Stainless Steels• Low alloyed Steels• Super Alloys (e.g. Inconel)

Production Capacity & Shipments 2020

Heat Resistant Steels• NWS/DSP China

• Available Capacity: 4.500.000 pcs• Shipments 2020: 3.560.000 pcs

• MTE Serbia• Available Capacity: 2.750.000 pcs• Shipments 2020: 1.850.000 pcs

Cast Iron:• NWS/DSP China

• Available Capacity: 65,000 MTs• Shipments 2020: 37,583 MTs

• GTI India• Available Capacity: 20.000 MTs• Shipments 2020: 11.951 MTs

Aluminium Casting:• Available Capacity: 600.000 pcs

Investment Casting:• Available Capacity: 270.000 pcs

- depending on the part dimensions• Shipments 2020: 60.000

Production Equipment / Materials / Capacity



21.04.21 7

Research Material Laboratory

Dilatometer DIL 402C:- Linear Thermal Expansion Coefficient- Density

Laser Flash LFA 427:- Thermal Diffusivity

Differential Scanning Calorimeter DSC 404: - Curie Temperature- Phase Transformation- Specific Heat

Thermal Gravimetric Differential Thermal Analyser STA 449:- Oxidation

Thermal Characteristics Determination Deep Analysis Equipment

Hydrogen / Nitrogen / Oxygen Determinator TCH 600C:- Gas Analysis in Melt- Residual Gas Analysis in Solid Metals

Scanning Electron Microscope S-3400N:- Failure analysis- Qualitative Chemical Analysis (EDX)- Phase analysis (EBSD)

Optical Emission Spectrometer with Inductively-Coupled Plasma Excitation OES-ICP:- Wet Chemical Analysis

Mechanical Characteristics Determination

Resonant Frequency and Damping Analyzer HTVP 1600:- Dynamic Young’s Modulus, Shear Modulus and Poisson’s Ratio

Charpy Impact Tester NI300C:- Toughness at RT and Low Temperatures

Creep Tester GWT 1304:- Creep to Rupture at High Temperatures

Fatigue Machine 8801:- Low Cycle Fatigue at High Temperatures

Tensile Testing Machine AG-X:- Tensile Properties at High Temperatures



21.04.21 8

Turbo Components – Turbine Housings Turbo Components – Bearing Housings

Exhaust Manifolds

Other Iron Casting Parts

Aluminium Casting Parts

Investment Casting Parts

Hea

tRes

ista

ntSt

eel C

astin

g Pa

rts

Iron

Cas

ting

Part

s

Product Portfolio



21.04.21

Assemblies & Systems Provider

Sub-Assemblies / Welding / Thermal Insulation / Systems Manufacturing Value Added Processes

Sliding Bar Welding. WG Lever Assy

Pin Assy Bush Pressing

Value Added Processes

TIG Welding

Laser Welding

NWS

MTEGTI

NWS

MTE



21.04.21 10

0

2

4

6

8

10

12

14

16

18

20

Revenue (in M USD) Sales 2020 / Product & Plant Distribution (in M pcs)

Facts & Figures

0

100

200

300

400

500

600

700

800

900

1000

2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020

MEI TA NWS/DSP

MTE

GTI

MEI TA

NWS/DSPMTE

GTI

* Excluding Sales from Streit Groupe

* Pcs sold (not revenue)

Regions & Markets

0% 50% 100%



21.04.21 11

Foundry Tooling

• Series & Prototype Toolings aremanufactured INHOUSE at NWS/ DSP China

• MAGMA Casting Simulation Software for part and toolingdesign (8 licenses and proprietarymaterial data)

Machining Fixtures

• Prototype Fixtures aremanufactured INHOUSE at NWS / DSP China

• Series Fixtures are manufacturedINHOUSE at WSI Taiwan

Machining Centres

• Vertical Lathe & Casting After Treatment Machines (Cutting andGrinding) manufactured INHOUSE at WSI Taiwan

• 5 Axis Machining Centres boughtfrom External Companies

Automation / Equipment

• Further production equipment such as conveyor systems, leakage testmachines, washing machines, fixtures, gauges as well asautomation systems developedand manufactured at WSI & DSA

Cutting Tools

• INHOUSE Production of specialcutting tools (with ext. machines)

Automated Deburring

• High volume projects deburredautomatically on-line by robots

Tooling Development & Automation



21.04.21 12

X-Ray, Dye Penetration & Magnetic Particle Inspection

X-Ray Equipment Dye Penetration Check Equipment

Magnetic Particle Inspection for surface crack verification

Computer Tomography

One CT Machine available for development purposes at NWS/DSP China

GeneralInspection Type

Digital RadiographyStandard Rotation Only

Large Field of ViewLocal Field

Energy Power 4MeVRadiography area 400×400mm2

Detective SizeEquivalent thickness in steel (film) 210mm

Maximum Diameter 350mmMaximum Height 550mmMaximum Weight 50kg

Capability for Casting Defect Detection

Gas Hole Detective Capability ≧Φ0.3mm

Crack Detective Capability width≧50um

High density of Slag (Dross) ≧Φ0.1mm

Non Destructive Quality Analysis

NWS China 3 Machines 2 sets of Equipment

GTI India 1 Machine 2 sets of EquipmentMTE Serbia 1 Machine 1 set of Equipment

NWS China 6 sets of Equipment

GTI India 2 sets of Equipment

MTE Serbia 1 set of Equipment



21.04.21 13

CMM Equipment

All MeiTa facilities have several CMM machines for tactile 3D measurementavailable (mainly Zeiss with Calypso)

• NWS: 44 machines• MTE: 9 machines• GTI: 16 machines

GOM Equipment

Multiple GOM optical measurementdevices available in each foundry forscanning parts/tools/core/components:

• NWS: 3 machines• MTE: 1 machine• GTI: 1 machine

Mechanical Properties

Tensile Test, Hardness Test andMicrostructure available at all MeiTaProduction Locations

Chemical Composition

Optical Emission Spectrometers usedto analyze chemical composition ofthe melt prior and after pouring.

• NWS: 7 machines• MTE: 2 machines• GTI: 2 machines

Quality Control Series Production

Tensile Test Machine AK-IS 250KN:

Microstructure Testing:

Other Inspection Equipment

GOM Scan Result (Core-Scan):

DMC & Barcode Quality Check:

Comparative Measurements (on-line):

On-Line Tactile Measuring



21.04.21 14

OEM Automotive Customers Tier1 Turbocharger Customers Other Customers (Commercial Diesel, Motorcycles, etc)

John Deere

Customer Base



21.04.21 15

Thank YouBusiness Philosophy / 經營理念

Customer is top priority客戶至上

Honesty comes first誠信第一

Care for each other相互關懷

Learn actively積極學習

Quality Philosophy / 品質政策

Excellent quality質量第一

On-time-delivery交期準確

Reasonable price價格合理

Thoughtful service服務周到

No. 31 Hsiang Pang Road, Kuei Shan Hsiang,Taoyuan Hsien, Taiwan 33370Republic of China

No.2 Jin Fa Road, Shangmatai Industrial Area , Wu Chin District, Tianjin, P.R. ChinaTEL: +86-22-82289920 ; Fax: +86-22-82289731Website: www.nws.cn

Železnička 44v, 11504 Barič, Obrenovac, SerbiaTEL: + 381 11 715 9000Website: www.meitaeu.com

APIIC Multi Product SEZ, Dwarakapuram Village, Naidupet Mandal,SPSR Nellore District, Andhra Pradesh-524421, India.TEL: + +91 8623 276000Website: http://gti-india.com

MEI TA INDUSTRIAL CO., LTD.

TIANJIN NEW WEI SAN INDUSTRIAL CO., LTD.DA SHIANG PRECISION INDUSTRIAL CO., LTD.

MTE MEI TA EUROPE INDUSTRIES d.o.o.

GREENTECH INDUSTRIES PVT. LTD.

Documents

Global CASTING Solutions