GIULIA STRALLO Electrical Engineer

PROFESSIONAL EXPERIENCE Electrical Engineer ARUP May 2015 – present London, United Kingdom • Low Voltage (LV) network sizing. • Space planning and power distribution strategy (demolition plans, re-

using strategy, risers, comms routes, power routes, life safety strategy, LV schematic, cable sizing, containment sizing, breakers discrimination, switchboards sizing, switch room layout, generator room arrangement).

• Maximum demand calculation. • Earthing and bonding (5 wires diagram). • Lighting calculation (normal and emergency) and lighting control design. • Bespoke engineering solutions in response to architectural aspirations. • Communication, collaboration and coordination with other professionals

(architects, contractors, specialists, etc.). • Layout drawings (small power, lighting, comms, fire alarm, lightning

protection, containment, security and data, schematics). • Photovoltaic (PV) systems. • Responsible of the constructions process (review of drawings, technical

submittals, queries and variations). • Site inspections and reports. • Testing and commissioning (generator changeover, lighting control, fire

alarm, voice alarm cause and effect and emergency lighting). • Fit out design. • Exposure to Italian, British and American design requirements and

regulations.

MAIN PROJECTS

CERTIFICATION • Licensed as Professional

Engineer (Section A – Sector 1 – Civil and Environmental)

• Licensed as a Construction Design and Management Coordinator (pursuant to D.Lgs. 81/08 of the Italian legislation) – Civil and Industrial Engineering Department, Sapienza University of Rome

• Requirement for electrical installation BS7671:2008 – City of Westminster College, London

• Construction Skills Certificate Scheme card-Professionally qualified person

• Patent Adventure Diver, PADI Europe

MEMBERSHIP

G30 Shools Washington DC, USA Renzo Piano Building Workshop

Macallan Distillery Spey valley, Scotland, UK Rogers Stirk Harbour + Partners

Offices 65 Davies Street, London PLP Architecture

Sea Containers House London, United Kingdom BDG architecture

Fit out of Residential buildings Tottenhanm C. Rd, London Make Architects

Fubon Tower Taipei, Taiwan Renzo Piano Building Workshop

giuliastrallo88@gmail.com http://www.giuliastrallo.com London, United Kingdom

I obtained a Master’s Degree in Building and Architectural Engineering summa cum laude from Sapienza University of Rome in 2014. Since then I’ve been working on electrical systems (more than three years experience).

PAST PROFESSIONAL EXPERIENCE Electrical Engineer DFM CONSULTING srl July 2014 – January 2015 Rome, Italy

• Collaboration in the design of special electrical systems (fire alarm, public address, CCTV, Intruder detection, access control),earthing system and lightning protection, BMS, lighting system.

PROJECTS o NATO air base. o Refurbishment and extention works of Banca di Credito

Cooperativo office buildings in Rome and Milan.

Building Engineering AGL D’AMORE srl April 2014 – June 2014 Rome, Italy

• Design of restructuring of the Ghana Embassy in Rome.

TRAINING PROGRAMME Site Placement SKANSKA UK Group

52 Lime St “The Scalpel”, London, UK

• Installation hands-on experience on the tools. • Testing and commissioning HV and LV network. • Sequence and organisation of construction and implications. • Site construction programme. • Coordination between main contractor and sub-contractors. • Estimation and cost control.

Internal Placement with Arup Building Performance System

London, UK • Mechanical systems control strategy. • Building Performance Evaluation and wellbeing study from data

collection. • Demand Response Management. • Control Enclosure Factory Acceptance Test.

Site Placement with generator manufacturer BELLS Control Power Solutions

Project Nova, Victoria Station, London, UK • Generators features, component parts and installation requirements. • Generator control strategy (SCADA, PLC system) and commissioning.

Switchgears Manufacturer Placement ABB Group

Bergamo-Garbagnate-Dalmine, Italy • Manufacturing process for switchgear and related assemblies parts

(characteristics of breakers and their selectivity, discrimination and protection coordination, power factor correction, harmonic filters, forms of separation, factory tests, standards, MV apparatus, Relays).

LV Panelboards Assembly Manufacturer Placement, Alan Electrical LTD

St Albans, UK • Practical hands-on experience on LV switchboards and DB (meters,

MCB and relays wiring). • Design criteria for switchgears and switch rooms, switchgears and

components.

SOFTWARE LANGUAGES Italian

English

STRENGHTS Multidisciplinary approach Team working Handle stressful situation Practicality and pragmatism

EDUCATION ARUP Graduate Program training courses: • Lighting & Daylight • Lighting Controls & LED lighting • The design process • Life safety and fire alarms • Vertical transportation • Space planning • Maximum demand and

transformers • Cables and circuit protection • Switchgear and motor starting • UPS • Generators • Sustainability • Harmonics and EMC • Earthing and lightning protection • Amtech (electrical design

calculation software according to BS-7671)

• Electrical safety

Master’s degree in Building & Architectural Engineering

Sapienza University of Rome

First Class Honour

FINAL WORK Refurbishment and renovation design of the ex-brick factory Mariani in Monterotondo (Rome): Field survey, urban design, architectural space transformation, construction details, noise impact assessment, U-value analysis and technical solutions, seismic evaluation and structural reinforcement, fire fighting, air conditioning systems, 3D modelling and rendering.

Revit Autocad

Excel

DIALux Amtech

3dsMax Illustrator Photoshop

MicrosoftProject Primus

Bluebeam