Gigaset3000classic Ug Int Eng 50

EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH.We hope you enjoy your Gigaset.

DE Sehr geehrte Kundin, sehr geehrter Kunde,die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), die ihrerseits das Gigaset-Geschft der Siemens AG fortfhrte. Etwaige Erklrungen derSiemens AG oder der SHC in den Bedienungsanleitungen sind daher als Erklrungen der Gigaset Communications GmbH zu verstehen.Wir wnschen Ihnen viel Freude mit Ihrem Gigaset.

FR Chre Cliente, Cher Client,la socit Gigaset Communications GmbH succde en droit Siemens Home and Office Communication Devices GmbH & Co. KG (SHC) qui poursuivait elle-mme les activits Giga-set de Siemens AG. Donc les ventuelles explications de Sie-mens AG ou de SHC figurant dans les modes demploi doivent tre comprises comme des explications de Gigaset Communications GmbH.Nous vous souhaitons beaucoup dagrment avec votre Gigaset.

IT Gentile cliente,la Gigaset Communications GmbH successore della Sie-mens Home and Office Communication Devices GmbH & Co. KG (SHC) che a sua volta ha proseguito lattivit della Siemens AG. Eventuali dichiarazioni della Siemens AG o della SHC nei manuali distruzione, vanno pertanto intese come dichiarazioni della Gigaset Communications GmbH.Le auguriamo tanta soddisfazione con il vostro Gigaset.

NL Geachte klant,Gigaset Communications GmbH is de rechtsopvolger van Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), de onderneming die de Gigaset-activiteiten van Siemens AG heeft overgenomen. Eventuele uitspraken of mededelingen van Siemens AG of SHC in de gebruiksaan-wijzingen dienen daarom als mededelingen van Gigaset Communications GmbH te worden gezien.

Wij wensen u veel plezier met uw Gigaset.ES Estimado cliente,

la Gigaset Communications GmbH es derechohabiente de la Siemens Home and Office Communication Devices GmbH & Co. KG (SHC) que por su parte continu el negocio Gigaset de la Siemens AG. Las posibles declaraciones de laSiemens AG o de la SHC en las instrucciones de uso se deben entender por lo tanto como declaraciones de la Giga-set Communications GmbH.Le deseamos que disfrute con su Gigaset.

PT SCaros clientes, Gigaset Communications GmbH a sucessora legal da Sie-mens Home and Office Communication Devices GmbH & Co. KG (SHC), que, por sua vez, deu continuidade ao sector de negcios Gigaset, da Siemens AG. Quaisquer declara-es por parte da Siemens AG ou da SHC encontradas nos manuais de utilizao devero, portanto, ser consideradas como declaraes da Gigaset Communications GmbH.Desejamos que tenham bons momentos com o seu Gigaset.

DA Kre Kunde,Gigaset Communications GmbH er retlig efterflger til Sie-mens Home and Office Communication Devices GmbH & Co. KG (SHC), som fra deres side viderefrte Siemens AGs Gigaset-forretninger. Siemens AGs eller SHCs eventuelle forklaringer i betjeningsvejledningerne skal derfor forsts som Gigaset Communications GmbHs forklaringer.Vi hber, du fr meget glde af din Gigaset.

FI Arvoisa asiakkaamme,Gigaset Communications GmbH on Siemens Home and Office Communication Devices GmbH & Co. KG (SHC)-yri-tyksen oikeudenomistaja, joka jatkoi puolestaan Siemens AG:n Gigaset-liiketoimintaa. Kyttoppaissa mahdollisesti esiintyvt Siemens AG:n tai SHC:n selosteet on tmn vuoksi ymmrrettv Gigaset Communications GmbH:n selosteina. Toivotamme Teille paljon iloa Gigaset-laitteestanne.

SV Kra kund,Gigaset Communications GmbH vertar rttigheterna frn Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), som bedrev Gigaset-verksamheten efter Sie-mens AG. Alla frklaringar frn Siemens AG eller SHC i anvndarhandboken gller drfr som frklaringar frn Gigaset Communications GmbH.Vi nskar dig mycket nje med din Gigaset.

NO Kjre kunde,Gigaset Communications GmbH er rettslig etterflger etter Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), som i sin tur viderefrte Gigaset-geskjeften i Siemens AG. Eventuelle meddelelser fra Siemens AG eller SHC i bruksanvisningene er derfor forst som meddelelser fra Gigaset Communications GmbH.Vi hper du fr stor glede av din Gigaset-enhet.

EL , , Gigaset Communications GmbH Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), Gigaset Siemens AG. Siemens AG SHC Gigaset Communications GmbH. Gigaset.

HR Potovani korisnici, Gigaset Communications GmbH pravni je sljednik tvrtke Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), koji je nastavio Gigaset poslovanje tvrtke Siemens AG. Zato sve izjave tvrtke Siemens AG ili SHC koje se nalaze u uputama za upotrebu treba tumaiti kao izjave tvrtke Gigaset Communications GmbH.Nadamo se da sa zadovoljstvom koristite svoj Gigaset ureaj.

SL Spotovani kupec!Podjetje Gigaset Communications GmbH je pravni naslednik podjetja Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), ki nadaljuje dejavnost znamke Gigaset podjetja Siemens AG. Vse izjave podjetja Siemens AG ali SHC v prironikih za uporabnike torej veljajo kot izjave podjetja Gigaset Communications GmbH.elimo vam veliko uitkov ob uporabi naprave Gigaset.

Issued byGigaset Communications GmbHSchlavenhorst 66, D-46395 BocholtGigaset Communications GmbH is a trademark licensee of Siemens AG

Gigaset Communications GmbH 2008All rights reserved.Subject to availability. Rights of modificationsreserved.

www.gigaset.com

CS Ven zkaznci, spolenost Gigaset Communications GmbH je prvnm nstupcem spolenosti Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), kter dle pejala segment produkt Gigaset spolenosti Siemens AG. Jakkoli prohlen spolenosti Siemens AG nebo SHC, kter naleznete v uivatelskch prukch, je teba povaovat za prohlen spolenosti Gigaset Communications GmbH.Doufme, e jste s produkty Gigaset spokojeni.

SK Ven zkaznk, Spolonos Gigaset Communications GmbH je prvnym nstupcom spolonosti Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), ktor zasa pokraovala v innosti divzie Gigaset spolonosti Siemens AG. Z tohto dvodu je potrebn vetky vyhlsenia spolonosti Siemens AG alebo SHC, ktor sa nachdzaj v pouvateskch prrukch, chpa ako vyhlsenia spolonosti Gigaset Communications GmbH.Verme, e budete so zariadenm Gigaset spokojn.

RO Stimate client, Gigaset Communications GmbH este succesorul legal al companiei Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), care, la rndul su, a continuat activitatea companiei Gigaset a Siemens AG. Orice afirmaii efectuate de Siemens AG sau SHC i incluse n ghidurile de utilizare vor fi, prin urmare, considerate a aparine Gigaset Communications GmbH.Sperm ca produsele Gigaset s fie la nlimea dorinelor dvs.

SR Potovani potroau, Gigaset Communications GmbH je pravni naslednik kompanije Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), kroz koju je nastavljeno poslovanje kompanije Gigaset kao dela Siemens AG. Stoga sve izjave od strane Siemens AG ili SHC koje se mogu nai u korisnikim uputstvima treba tumaiti kao izjave kompanije Gigaset Communications GmbH.Nadamo se da ete uivati u korienju svog Gigaset ureaja.

BG , Gigaset Communications GmbH Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), Siemens AG. , Siemens AG SHC, , Gigaset Communications GmbH. Gigaset.

HU Tisztelt Vsrl!A Siemens Home and Communication Devices GmbH & Co. KG (SHC) trvnyes jogutdja a Gigaset Communications GmbH, amely a Siemens AG Gigaset zletgnak utdja. Ebbl kvetkezen a Siemens AG vagy az SHC felhasznli kziknyveiben tallhat brmely kijelentst a Gigaset Communications GmbH kijelentsnek kell tekinteni. Remljk, megelgedssel hasznlja Gigaset kszlkt.

PL Szanowny Kliencie, Firma Gigaset Communications GmbH jest spadkobierc prawnym firmy Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), ktra z kolei przeja segment produktw Gigaset od firmy Siemens AG. Wszelkie owiadczenia firm Siemens AG i SHC, ktre mona znale w instrukcjach obsugi, naley traktowa jako owiadczenia firmy Gigaset Communications GmbH.yczymy wiele przyjemnoci z korzystania z produktw Gigaset.

TR Sayn Mterimiz, Gigaset Communications GmbH, Siemens AG'nin Gigaset iletmesini yrten Siemens Home and Office Communication Devices GmbH & Co. KG (SHC)'nin yasal halefidir. Kullanma klavuzlarnda bulunan ve Siemens AG veya SHC tarafndan yaplan bildiriler Gigaset Communications GmbH tarafndan yaplm bildiriler olarak alglanmaldr.Gigaset'ten memnun kalmanz mit ediyoruz.

RU ! Gigaset Communications GmbH Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), , , Gigaset Siemens AG. , Siemens AG SHC , Gigaset Communications GmbH. , Gigaset .

Issued byGigaset Communications GmbHSchlavenhorst 66, D-46395 BocholtGigaset Communications GmbH is a trademark licensee of Siemens AG

Gigaset Communications GmbH 2008All rights reserved.Subject to availability. Rights of modificationsreserved.

www.gigaset.com

Giga 3000 Cla, IM1-en, A31008-G3000-B001-50-6Z19 3000cla-IM-titel-en.fm 29.02.00

8

EN

GLI

SH

*LJDVHW

3000&ODVVLF

Operating Instructionsand Safety Precautions

3000Cla-IM1-50-en.bk Seite 1 Donnerstag, 2. Mrz 2000 12:51 12

2Giga 3000 Cla, IM1-en, A31008-G3000-B001-50-6Z19 3000ClaU.fm 02.03.00

Brief overview

Display keysWhen icons are displayed above the 3 keys in the display, the meaning of these icons is as follows:

The display is protected by a film. Please remove protective film.

Charging status

full emptyRediala number

Makeinternal call

Talk key

acceptcall

dial call number

Keypad protection

on/off:hold down

Deletecharacters

Base station icon

stationary: readyfor outgoing/inco-ming calls

flashing: no base station contact

Speed dialling

activate

Set key

to save for settings

End call key

end call on/off:

hold down

Recall key

for systems& select services

insert pause:hold down

Confirm

Scroll up

Scroll down

8



Quick reference guide

Function Key combination

Activate/deactivate the handset Hold down for 1 second

Activate/deactivate keypad protection Hold down } for 1 second

Answer a call D

Make an external call PD

Redial a number 1 ora D

Save a speed dial num-ber

z- e.g.s bPb

Dial a speed dial num-ber -a or e.g.D

Dial a number from the call list zsaD

Set the handsetvolume zb e.g.sb

Mute the microphone {Microphone muted;4Microphone on

Make an internal call { e.g.

Call all handsets {~

Transfer call (connect) { e.g.s

Internal enquiry call { e.g. s;Terminate enquiry call:4

8



Safety precautions Never use ordinary (non-rechargeab

le) batteries. Only use approved batteries of the same type (rechargeable), as otherwise battery damage can re-sult (dangerous), see table page 7.

The handsets battery compartments feature the following diagrams:g Insert rechargeable batteries correctly in

accordance with polarity symbols.

h Operate battery type in accordance with these operating instructions.

Do not use non-Siemens charging devices, as this could damage the batteries.

Batteries heat up during charging this is a normal occur-rence and is not dangerous.

The handset can affect medical equipment.

The handset can cause unpleasant humming in hearing aids.

Do not operate the handset in environments where there is risk of explosion, such as a paint shop.

Always include the operating instructions when passing your handset onto third parties.

The batteries and handset should be disposed of in an environmentally-friendly manner.

Displays Base station icon Charging status icon Mailbox function:New number in

the caller list

C Off hook(;7 External connection

,17 Internal connection

Handset locked

1 Pause

_ BlankJ Star key ~ Pound key }P Recall key 4

New message to answering machine1GJ Telephone PIN input

____ Keypad protection

8


5Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-50-6Z19 3000ClaIVZ.fm 29.02.00

ContentsBrief overview ................................................................... 2

Display keys......................................................................2Quick reference guide ...................................................... 3Safety precautions............................................................ 4Displays.............................................................................. 4Preparing the handset...................................................... 6

Inserting the batteries.......................................................6Charging the batteries ......................................................7Attaching the belt clip .......................................................8Activating/deactivating the handset ..................................8Activating/deactivating keypad protection ........................8

Registering the handset................................................... 9Making calls .................................................................... 10

Making an external call ...................................................10Making an internal call ....................................................10Answering a call..............................................................10Transferring a call, enquiry call........................................11

Redial ............................................................................... 11Speed dialling ................................................................. 12

Saving/changing/deleting call numbers...........................12Speed dialling..................................................................12Deleting the speed dial list .............................................13

Call-by-call support......................................................... 13Security............................................................................ 14

Changing the telephone PIN ...........................................14Activating direct station selection ...................................14Activating the handset lock.............................................15Deactivating the handset lock/direct station selection....15

Settings............................................................................ 16Ringer volume.................................................................16Ring tones.......................................................................16Handset volume..............................................................16Activating/deactivating beeps .........................................17Activating/deactivating base station display....................17Activating/deactivating auto talk .....................................18Resetting the factory settings.........................................18Changing the base station ..............................................19Switching to tone dialling................................................19

Appendix ......................................................................... 20


6Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-50-6Z19 3000Cla.fm 02.03.00

Preparing the handsetContents of the packageGigaset 3000 Classic handset, 2 batteries, belt clip, operating instructions.

Inserting the batteries

Insert the batteries, ensuring correct polarity see figu-re on left.

Insert the battery cover approx. 3 mm into the battery compartment and slide it upwards until it clicks into pla-ce.

To open the battery cover, press the grooved area on the cover and slide downwards.

Never use ordinary (non-rechargeable) batteries. Only use approved batteries of the same type (rechargeable), as otherwise battery damage can result (dangerous), see table page 7.

The handsets battery compartments feature the following diagrams:g Insert rechargeable batteries correctly in

accordance with polarity symbols.h Operate battery type in accordance with these operating instructions.

Do not use non-Siemens charging devices, as this could damage the batteries.

Please dispose of old, defective batteries in an environmentally friendly manner in accordance with the relevant legislation.


7Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-50- 3000Cla.fm 02.03.00

Charging the batteriesThe batteries supplied are not charged.To charge the batteries, insert the handset in the base sta-tion or Gigaset 3000L charging unit (accessory) you will hear the confirmation beep. The charging status icon flashes on the handset display to indicate that a charging operation is in progress:

Approved batteries:

Always replace both batteries and only use batteries of the same type/from the same manufacturer.

Batteries empty Batteries 2/3 charged Batteries 1/3 charged Batteries full We recommend initially charging the batteries for at least

16 hours without interruption irrespective of the charging status icon.

Once the first charging operation is complete, you can replace the handset in the base station after every call. Charging is controlled electronically. This ensures opti-mum charging and prolongs battery life.

The batteries heat up during charging.

The battery charging status is only displayed correctly after uninterrupted charging/discharging. You should therefore avoid opening the battery compartment unne-cessarily.

Nickel-Cadmium (NiCd) Nickel-Metall-Hydrid (NiMH)

Sanyo N-3U (700 mAh) Saft VHAAH 1300 (1300 mAh)

Mobile Power 700 (700 mAh) Panasonic HHR-110 AA (1100 mAh)

Panasonic P-60AA DT (600 mAh)

Friwo NiMH (1400 mAh)

Varta 751 RS (700 mAh) Sanyo H-3 U (1500 mAh)

GP GP60AAKC (600 mAh) Toshiba TH-1200 AARE (1200 mAh)

GP GP130 AAHC (1300 mAh)

GP GP150 AAHC (1500 mAh)


8Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-50-6Z19 3000Cla.fm 02.03.00

Handset operating time/charging time:

Attaching the belt clip

Press the belt clip against the back of the handset until the side protrusions click into place in the holes provided.

Activating/deactivating the handset Press the end call key for 1 second.

Activating/deactivating keypad protectionWhen keypad protection is activated, the keypad buttons are ineffective. Calls can be accepted with the talk key D.} Hold key down for more than

1 second to activate/deactivate keypad pro-tection.

Capacity(mAh)

Standby time(hours)

Talk time(hours)

Charging time

(hours)

700 up to 150 over 10 approx. 5



The handset automatically activates as soon as you insert the batteries and place it in the base station/charging unit.


9Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-50- 3000Cla.fm 02.03.00

Registering the handsetYou must register your handset at the base station before you can start to make calls.

Step 1

First prepare the Siemens base station for registration:

Step 2

You now have one minute to enter the following at the handset:

z { ~ Press the keys shown.b Enter the base station number, e.g. (sta-

tion 1-4) and confirm.

System PIN b Enter the base stations system PIN and con-firm (factory setting: 0000) the unassigned call numbers appear after a few seconds.

e.g. s Enter the desired call number the statio-nary base icon is displayed.Your handset is ready for operation!

Gigaset Base station preparation

3010/pocket3015

Hold down the coloured base station key for approx. 10 seconds until you hear signal tones.

3020, 30253030, 3035

In the base station menu select registration option and confirm.

ISDN models

Press the display (LED) flashing during registration.

1000/2000 models

As for relevant successor model.

Please refer to the relevant operating instructions (step 1) to register at non-Siemens base stations.

You can register your Gigaset 3000 Classic handset at up to 4 different base stations, see above.


10

Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-50-6Z19 3000Cla.fm 02.03.00

Making callsMaking an external callP Enter the call number.

If necessary, correct it with the delete key |.

D Press the talk key to start the dial operation.Ending a call: Press the end call key .

Making an internal call{ Press the INT key the actual internal call

number is displayed.

P Enter the internal call number.Press ~ to call all handsets.Ending a call: Press the end call key .

Answering a callD Press the talk key.or

L remove the handset from the base station/charging unit if the auto talk feature is activa-ted.

You can cancel the dial operation with the end call key .

You can insert a pause with the recall key 4 (hold it down).

You can opt to not save entries, e.g. when checking an account: press the keys z ~, all characters entered af-terwards are not saved for number redial.


11

Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-50- 3000Cla.fm 02.03.00

Transferring a call, enquiry callSiemens base stations allow you to transfer an external call to another handset or to conduct an internal enquiry call.

{ Press the INT key.P Dial the internal call number.

When the user answers:

transfer the call: press the end call key . enquiry call: press the recall key 4 to revert to the cal-

ler on hold.

RedialRedialling a numberYou can access the last five call numbers dialled.

1 Display call numbers.a Select a call number.

If necessary, confirm the number with band correct it with the delete key |.

D Press the talk key to start the redial opera-tion.

Deleting redial numbersAll five redial numbers are deleted.

z Press the set key. y b Initiate the setting.Tel. PIN b Enter the telephone PIN and confirm

(factory setting: 0000).

s b Delete the redial list.


12


Speed diallingThe speed dialling function allows you to dial up to 10 call numbers at the push of a button.

Saving/changing/deleting call numbersz - Press the set key followed by the speed dial

key.

e.g. Enter the speed dial number (memory loca-tion, digit 0 to 9) or press a to scroll.

b Confirm the number.P Enter a new call number or delete/change an

existing call number with |.b Save the number.

Speed dialling- Display the call numbers.e.g. Enter the speed dial number (0 to 9) or

press a to scroll.If necessary, confirm the number with b and dial further digits for the extension num-ber.

D Press the talk key to start the dial operation.

Saving a call number from the redial listz - Press the set key followed by the speed dial

key.

e.g. b Enter the speed dial number (digit 0 to 9) or press a to scroll and confirm.

a Select the call number (scroll) the other redial numbers are displayed.

b Save the call number.


13


Deleting the speed dial listAll call numbers saved are deleted!

z Press the set key. y b Activate the function.Tel. PIN b Enter the telephone PIN and confirm


b Delete the speed dial list.

Call-by-call support Using the speed dial key

Hold down the speed dial key - to display the tele-phone companys call number saved as speed dial num-ber "0".

- Hold down the speed dial key the prefix code is displayed.

PD Enter the users call number and press the talk key to dial the "complete" number.

By "linking" the speed dial listYou can save a number of prefix codes for various tele-phone companies as speed dial numbers:

-ab Display the prefix code and confirm.e.g. -ab

Display the users call number in the speed dial list and confirm or enter it manually.

D Press the talk key to dial the complete num-ber.


14


SecurityChanging the telephone PINImportant functions/settings are protected by the handsets telephone PIN (Personal Identification Number).

z Press the set key. s b Activate the function.Tel. PIN b Enter the current telephone PIN and

confirm (factory setting: 0000).

2x new tel. PIN

Enter the new telephone PIN (4 digits) twice.

b Save the new telephone PIN.

Activating direct station selectionThis function is not available in all countries!

When direct station selection (DSS) is active, every key-stroke triggers a call to the DSS number saved. This function is used to call for help or raise an alarm. You can still be reached, however. Simply press the talk key D to accept a call.

Saving/changing/deleting a DSS number:

z Press the set key. b Select the function.Tel. PIN b Enter the telephone PIN and confirm

(factory settings: 0000).

s b Press the keys shown.P Enter or change the DSS number or press

| to delete it.b Save the DSS number direct station selec-

tion is activated.

Do not forget your telephone PIN! The PIN can only be reset by calling the Siemens hotline, see back cover.

The telephone lock is activated if you press b when the _ (empty) icon is displayed.


15


Activating the handset lockAll functions with the exception of emergency call are una-vailable when the telephone is locked. You can still be rea-ched, however. Simply press the talk key D to accept a call.

z Press the set key. b Select the function.Tel. PIN b Enter the telephone PIN and confirm


b Activate the telephone lock.

Deactivating the handset lock/direct station selectionz Press the set key. b Activate the function.Tel. PIN b Enter the telephone PIN and confirm


b Deactivate direct station selection/telephone lock.

You can dial all base station emergency numbers.


16


SettingsRinger volumeYou can choose between 5 volumes and the "crescendo" ring (increasing volume).

z v Activate the function you will hear the rin-ger.

e.g. u Change the ringer volume (level 1 to 5, crescendo = 6).

b Save the setting.

Ring tonesYou can choose between 10 ring tones.

z Activate the function you will hear the rin-ger.

e.g. Select the ring tones (0 to 9).b Save the setting.

Handset volumeYou can set the handset volume to any of 3 levels (even during a call).

z Press the set key. b Activate the function.e.g. s Change the volume (1, 2 or 3).b Save the setting.

v


17


Activating/deactivating beeps Confirmation beeps function code 13 (both beeps)

Confirmation beep (1 beep) when you conclude a function and replace the unit in the charging unit

Error beep (4 short beeps) when you make an incorrect entry

Key beep function code 14

every keystroke is confirmed

Battery warning beep function code 15

when the battery is emptyYou can also activate the battery warning beep for call status only = enter 2.

z Press the set key.e.g. ub For example, enter function code 14 and

confirm.

e.g. For example, deactivate the key beep.Deactivate = 0; activate = 1

b Save the entry.

Activating/deactivating base station displayThe current base station is displayed when the handset is idle.

z Press the set key. b Activate the function.e.g. For example, activate the display.

Activate = 1; deactivate = 0

b Save the setting.


18


Activating/deactivating auto talkWhen this function is active, you can answer a call by remo-ving the handset from the base station or charging unit.

z Press the set key. x b Activate the function.e.g. Enter to deactivate auto talk.

Enter to activate auto talk.b Save the setting.

Resetting the factory settingsThis setting does not delete the telephone PIN. Base sta-tion registrations are maintained.

Factor settings:

z Press the set key. y b Activate the function.Tel. PIN b Enter the telephone PIN and confirm

(factory default: 0000).

b Reset settings to factory default.

Speed dial numbers, redial, DSS number deleted

Handset volume, ringer melody 1

Ringer volume 5

Key beep, battery warning beep, confirma-tion beeps, auto talk

on

Base station display off


19


Changing the base stationPrerequisite: the handset is registered with more than one base station.

You can choose one of the following settings:

Set the handset to automatically select (factory setting) the best base (factory setting).

Set the handset to priority base station the handset searches for other base stations if this is not found within 30 seconds.

Set the handset to a fixed base station.

z { Press the set key followed by the INT key.e.g. For example, set base 1 as the priority base.

For automatic selection: enter .For priority base: enter the base number twice.

For fixed base: enter the base number once.

b Save the setting and terminate the function.

Switching to tone diallingIf you are operating the base station in a telephone system that uses pulse dialling (DP), you can switch to tone dialling (DTMF), e.g. for telephone banking, to check an external answering machine, etc.

Prerequisite: a connection is active.

z Press the set key.~ Activate tone dialling tone dialling is active

until the call is cleared down.


20


AppendixRangeThe range is approximately 300 metres outdoors and up to 50 metres indoors. The base icon flashes when you move outside this range.

Guarantee/serviceSiemens AG offers a six-month guarantee for this device from the date of purchase from the dealer. Within this period, Siemens AG will rectify all material or manufacturing defects by repairing or replacing the defective terminal.

The guarantee shall not cover damage caused by improper use, wear and tear or third party access. The guarantee shall not cover consumables or defects which only slightly decrease the value or serviceability of the device.

Service telephone number (see back cover).

ApprovalThe Gigaset 3000 Classic has received approval for opera-tion throughout the EU.

Siemens Service should only be contacted if problems arise with the unit. Your specialist dealer will be happy to answer any questions on unit operation. Contact your network pro-vider for questions concerning telephone connections.


Documents

Gigaset3000classic Ug Int Eng 50