Upload
anthea
View
31
Download
0
Embed Size (px)
DESCRIPTION
Geoinformation IV. GIS-Seminar. SQL und Simple Features. Übersicht. SQL - relationale Datenbanken ... was ist das? kurze Wiederholung: Simple Features Feature Tables Speicherungsarten Anfragen an die Geometrie durch Methoden. SQL - was ist das?. S trucured Q uery L anguage - PowerPoint PPT Presentation
Citation preview
Institut für Kartographie und GeoinformationProf. Dr. Lutz Plümer
Geoinformation IVGIS-Seminar
SQL und Simple Features
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
2 2
Übersicht
• SQL - relationale Datenbanken ... was ist das?• kurze Wiederholung: Simple Features• Feature Tables
– Speicherungsarten
• Anfragen an die Geometrie durch Methoden
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
3 3
SQL - was ist das?
• Strucured Query Language
• Standard für relationale Datenbanken
• IBM: SEQUEL (1970) SQL (ab 1980)
• Sprache zur Definition und Manipulation von
relationalen Datenbanken
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
4 4
Relationale Datenbank
• 2-dimensionale MatrixPunktnummer X-Koordinate Y-Koordinate
1 0,00 0,00 2 0,00 100,00 3 100,00 100,00 4 100,00 0,00
Beispieltabelle:
• Inhalte:– Spalten: Attribute– Jede Zeile ein Feature
• Eigenschaften– jede Spalte beinhaltet ein Attribut und hat einen
Attributnamen– die Wertebereiche der Eintragungen sind elementar und
nicht weiter zerlegbar
– Reihenfolge der Spalten ist beliebig
– Alle Zeilen (Tupel) sind paarweise verschieden
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
5 5
Simple Features
Übersicht:
Erinnerung:Geoinformation 4,
Vorlesung 10
Geometrie-Klassen-Hierarchie (OGC)
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
6 6
Simple Features
0-, 1- oder 2-dim. Geometrien
• Point• MultiPoint• Curve• Line• LineString• MultiLineString• MultiCurve• LinearRing• Polygon• MultiPolygon
• Surface
• MultiSurface
• Geometry Collection
0-dimensional
1-dimensional
2-dimen-sional
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
7 7
Feature Table
• Features sind räumliche Objekte• Feature Tables ähneln im Aufbau den vorhin
beschriebenen relationalen Datenbanken• Jedes Feature wird in einer Zeile dargestellt
• Darstellung und Speicherung der Simple Features wurde vom Open GIS Consortium (OGC) entwickelt
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
8 8
Feature Table
Es gibt drei Speicherungsarten der Feature Tables
• SQL 92, unter Anwendung von
a) numerischen
b) binären
SQL-Typen zur Speicherung der Geometrie
• SQL 92, mit Geometrietypen
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
9 9
Beispiel 1: SQL92 - numerische Implementation (1)
GID ESEQ ETYPE SEQ X0 Y0 X1 Y1 X2 Y2 X3 Y3 X4 Y4
1 1 3 1 0 0 0 30 30 30 30 0 0 0
1 2 3 1 10 10 10 20 20 20 20 10 10 10
2 1 3 1 30 0 30 30 60 30 60 0 30 0
2 2 3 1 40 5 40 20 45 20 45 15 50 15
2 2 3 2 50 15 50 5 40 5 Nil Nil Nil Nil
3 1 3 1 0 30 0 60 30 60 30 30 0 30
4 1 3 1 30 30 30 60 60 60 60 30 30 30
GID: geometry identifier
ESEQ: element sequence number
ETYPE: primitive type -> Geometrietyp• 1 - Point• 2 - LineString• 3 - Polygon•...
SEQ: sequence number
(60,30)(0,30)
(0,60) (60,60)(30,60)
GID 1
GID 3
GID 2
GID 4
ESEQ 2 ESEQ 2
(0,0) (30,0) (60,0)
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
10 10
Beispiel 1: SQL92 - numerische Implementation (2)
GID ESEQ ETYPE SEQ X0 Y0 X1 Y1 X2 Y2 X3 Y3 X4 Y4
1 1 3 1 0 0 0 30 30 30 30 0 0 0
1 2 3 1 10 10 10 20 20 20 20 10 10 10
2 1 3 1 30 0 30 30 60 30 60 0 30 0
2 2 3 1 40 5 40 20 45 20 45 15 50 15
2 2 3 2 50 15 50 5 40 5 Nil Nil Nil Nil
3 1 3 1 0 30 0 60 30 60 30 30 0 30
4 1 3 1 30 30 30 60 60 60 60 30 30 30
(0,0) (30,0) (60,0)
(60,30)(0,30)
(0,60) (60,60)(30,60)
GID 1
GID 3
GID 2
GID 4
ESEQ 2 ESEQ 2
SEQ 2SEQ 1
Darstellung der Geometrie
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
11 11
Beispiel 2: SQL92 - binäre Implementation
GID XMIN YMIN XMAX YMAX Geometry
1 0 0 30 30 <Well-Known-Binary-Geometry>
2 30 0 60 30 <WKBGeometrie>
3 0 30 30 60 <WKBGeometrie>
4 30 30 60 60 <WKBGeometrie>
X,Y -> Min, Max:Definition der bounding box
WKBGeometrie:
Stellt die Geometrie als eine
Sequenz von unsigned
integer oder double dar.
(60,30)(0,30)
(0,60) (60,60)(30,60)
GID 1
GID 3
GID 2
GID 4
ESEQ 2 ESEQ 2
(0,0) (30,0) (60,0)
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
12 12
SQL92 mit Geometrietypen
• Zu jedem Geometrietyp wird eine Tabelle definiert, die nur Objekte des einen Geometrietyps enthält
• basiert auf der Geometrie Klassen Hierarchie vom OGC• Anwendung von Methoden möglich
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
13 13
Anfragen
• Anfragen an die Geometrie werden in SQL durch vorgefertigte Methoden getätigt• Diese Methoden können nur im SQL 92 mit Geometrietypen benutzt werden• Es gibt Methoden, die
– für alle Geometrien gelten Basis-Methoden– nur auf spezielle Geometrien angewendet werden können
• Ausgaben sind im WKBGeometry Format
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
14 14
Anfrage in SQL
• Ein Anfrage in SQL92 -Form sieht folgendermaßen aus:
Beispiel: Schnitte von Flurstücken mit einer Straße:
SELECT Parcel.Name, Parcel.Id FROM Parcels, Street
WHERE Intersects(Parcels.Location, Street.centerline) = 1
• Ausgabe: Alle Flurstücke, die von dieser Straße geschnitten werden
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
15 15
Basis-Methoden
• Dimension ( ):Integer - Dimension des Objektes (0, 1 od. 2)• GeometryType ( ):String - Name der Geometrie• SRID ( ):Integer - ID für das Spatial Reference
System• Envelope( ):Geometry - Bounding Box als Polygon• AsText( ):String - textuelle Repräsentation• AsBinary( ):Binary - binäre Repräsentation• IsEmpty( ):Integer - 1: true, 0: false, -1: unknown• IsSimple( ):Integer - 1: true, 0: false, -1: unknown• Boundary( ):Geometry - Grenze
Anfrage Ausgabe
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
16 16
Test-Methoden für räumliche Beziehungen
• Equals():Integer - Gleichheit mit einer anderen Geometrie• Disjoint():Integer - Menge der gemeinsamen Punkte = 0 • Intersects():Integer - Schnitt mit einer anderen G.• Touches():Integer - Berührung mit einer anderen G. • Crosses():Integer - Kreuzung mit einer anderen G.• Within():Integer - innerhalb einer anderen Geometrie• Contains():Integer - Enthält eine andere G. • Overlaps():Integer - Überlappung mit einer anderen G.• Relate():Integer - Beziehung mit einer anderen G.
(Beispiele siehe unter anderem Vorlesung 10, GIS III 2001)
Ausgabe ist immer 1 für „true“, 0 für „false“ oder -1 für „unknown“!
Test Beziehung
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
17 17
Methoden, die Spatial Analysis unterstützen (1)
• Distance():Double - kürzeste Distanz zu einer anderen Geometrie
• Buffer():Geometry - Repräsentation aller Punkte, die einen kleineren oder gleichen
Abstand wie den angegebenen von der Geometrie haben.
• ConvexHull( ):Geometry - Repräsentation der konvexen Hülle• Intersection():Geometry - Repräsentation des Schnitts
(AB)• Union():Geometry - Repräsentation der Vereinigten
Punktmenge (AB)
Anfrage Ausgabe
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
18 18
Methoden, die Spatial Analysis unterstützen (2)
• Difference():Geometry - Repräsentiert die Geometrie der nichtgemeinsamen Punkte (A-B)
• SymDifference():Geometry - ist gleich der Vereinigung minus dem Schnitt ((A-B)(B-A))
Anfrage Ausgabe
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
19 19
Methoden - GeometryCollection
• NumGeometries( ):Integer - die Anzahl der enthaltenen Geometrien
• GeometryN():Geometry - die N-te Geometrie in der Collection
Anfrage Ausgabe
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
20 20
Methoden - Point
• X( ):Double - X-Koordinate• Y( ):Double - Y-Koordinate
Anfrage Ausgabe
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
21 21
Methoden - Curve
• Length( ):Double - Länge der Kurve• StartPoint( ):Point - Startpunkt• EndPoint( ):Point - Endpunkt• IsClosed( ):Integer - 1: „true“, wenn Startpunkt=Endpunkt
0: „false“ oder -1: „unknown“• IsRing( ):Integer - 1: „true“, falls closed und simple !
0: „false“ oder -1: „unknown“
„simple“: kein Punkt wird doppelt durchlaufen, mit Ausnahme des Start- und Endpunktes!
Anfrage Ausgabe
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
22 22
Methoden - LineString, Line, LinearRing
• NumPoints( ):Integer - Anzahl der Punkte im LineString• PointN(N:Integer):Point - Punkt n aus LineString l
Anfrage Ausgabe
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
23 23
Methoden - MultiCurve
• IsClosed( ):Integer - 1: „true“, wenn Startpunkt=Endpunkt 0: „false“ oder -1: „unknown“
• Length( ):Double - Länge der Kurve
Anfrage Ausgabe
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
24 24
Methoden - Surface
• Area( ):Double - Fläche des Surface• Centroid( ):Point - Schwerpunkt• PointOnSurface( ):Point - Punkt der garantiert im Surface
liegt
Anfrage Ausgabe
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
25 25
Methoden - Polygon
• ExteriorRing( ):LineString - umgebender Ring• NumInteriorRing( ):Integer - Anzahl der inneren Ringe• InteriorRingN():LineString - N-te innere Ring
Anfrage Ausgabe
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
26 26
Abschlusswort
• Simple Features vom OGC nur zweidimensional• Zukunft: komplexe Geometrien Spatial Schema
Institut für Kartographie und GeoinformationProf. Dr. Lutz Plümer
Vielen Dank für eure Aufmersamkeit!
Noch Fragen?
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
28 28
Line, LineString, LinearRing
einfach nicht einfach geschl./einf.
s
e
s s s
e
e e
geschl./nicht einf.
• ein Linestring ist eine Kurve (Curve), wenn zwischen den Punkten linear interpoliert wird
• besteht ein LineString aus exakt zwei Punkten, so wird er als Line bezeichnet
• Ist ein LineString „einfach“ und „geschlossen“, so wird er als LinearRing bezeichnet
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
29 29
Curve
• 1-dimensional• Sequenz von Punkten zwischen denen linear
interpoliert wird
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
30 30
MultiCurve
• 1 – dimensionale Geometrie• Elemente dieser Subklasse sind Kurven• Die Klasse wird als „einfach“ bezeichnet, wenn alle Elemente „einfach“
sind • Schnittpunkte dürfen nur in der Begrenzung zweier Elemente
vorkommen• Begrenzung dieser Klasse sind all diejenigen Punkte, welche in einer
ungeraden Anzahl der Teilelemente vorkommen• MultiCurve gilt als „geschlossen“, wenn alle Teilelemente „geschlossen“
sind
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
31 31
MultiLineString
• MultiCurve = MultiLineString, wenn Elemente LineStrings – (lineare Interpolation zwischen den Punkten)
s1
e1 s2
e2
einfachGrenzen = {s1,e2}
s1
s1e1 e1
s2 s2e2 e2
nicht einfachGrenzen = {s1,e1}
geschlossenGrenzen = {Ø}
s1 s1e2
e1
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
32 32
Polygon
• ebene Oberfläche, definiert durch eine äußere und 0 oder mehrere innere Grenzen– jede innere Grenze legt ein „Loch“ im Polygon fest
• die Grenzen bestehen aus LinearRings• mehrere Grenzen dürfen sich nicht schneiden
– Berührpunkte sind gestattet
Polygon mit einem ... zwei ...bzw. drei Ringen
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
33 33
MultiPolygon 1
• Subklasse, deren Elemente Polygone sind
• Kennzeichen :
• Die Innenräume und die Grenzen zweier Polygone dieser Klasse dürfen sich nicht schneiden
– Sie dürfen sich an einer begrenzten Anzahl von Punkten berühren
• MultiPolygon besteht aus einer geordneten, geschlossenen Ansammlung von Punkten
• Die inneren Bereiche dieser Klasse sind nicht zusammenhängend
• Die Anzahl der inneren Bereiche entspricht der Anzahl der Polygone
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
34 34
MultiPolygon 2
• die Grenzen dieser Klasse bestehen aus einer Ansammlung geschlossener Kurven (LineString)
• Jede Grenze wird exakt einem Polygon zugeordnet, welches sich in der Klasse befindet
1 Polygon 3 Polygone 2 Polygone 2 Polygone
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
35 35
Surface
• 2D – geometrisches Objekt• Zeichnet sich durch eine „äußere“ Grenze aus
– Darüber hinaus können mehrere „innere“ Grenzen bestehen
• Einfache Oberflächen (= Simple Surfaces) haben im 3D die gleiche Gestalt, wie ebene Oberflächen
• Polyhedral Surfaces erhält man, indem man einfache Oberflächen entlang ihrer Grenzen miteinander „vernäht“
• diese müssen dann nicht mehr eben sein (3D)
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
36 36
MultiSurface
• 2D Ansammlungen von Oberflächen
• zwei verschiedene Oberflächen (Surfaces) dürfen sich nicht schneiden
– ansonsten kein Multisurface sondern Surface
• die Grenzen zweier Elemente können sich in einer begrenzten Anzahl von Punkten berühren
• MultiSurface wird als abstrakte Klasse bezeichnet
• Sie definiert verschiedene Vorgehensweisen für deren Unterklassen
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
37 37
MultiGeometry
• Stellt eine Geometrie dar, die mehrere anderen Geometrien beeinhaltet
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
38 38
Textuelle Repräsentation (WKB)
• Ausgabe ist für den Menschen lesbar• Beispiel: Ein String im geogr. Koordinatensystem
für die UTM-Zone 10 im NAD83
GEOGCS[‘GCS_North_American_1983’,DATUM[‘D_North_American_1983’,SPHEROID[‘GRS_1980’,6378137,298.257222101]],PRIMEM[‘Greenwich’,0],UNIT[‘Degree’,0.0174532925199433]]
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
39 39
Binäre Repräsentation (WKB)
• Zahlencode• zur maschinellen Weiterverarbeitung• Beispiel:
B=1 T=3 NR=2 NP=3 X1 Y1 X2 Y2 X3 Y3 NP=3 X1 Y1 X2 Y2 X3 Y3
Ring 1 Ring 2
WKB Polygon
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
40 40
Beispiel - NRW
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
41 41
Beispiel - NRW: Envelope
Envelope( ):Geometry
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
42 42
Beispiel - NRW: Envelope
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
43 43
Beispiel - NRW: Envelope
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
44 44
Beispiel - NRW: Envelope
Ausgabe:
Polygon, das die
bounding box
repräsentiert
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
45 45
Beispiel - NRW: Boundary
Boundary( ):Geometry
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
46 46
Beispiel - NRW: Boundary
Ausgabe:
Polgon, das die Grenze
NRW´s repräsentiert
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
47 47
Beispiel - NRW: Buffer
Buffer():Geometry:Repräsentation aller Punkte, die
einen kleineren oder
gleichen Abstand wie den
angegebenen von der
Geometrie haben.
Z.B.: Umkreis von
X Kilometern
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
48 48
Beispiel - NRW: Buffer
Buffer():Geometry:Repräsentation aller Punkte, die
einen kleineren oder
gleichen Abstand wie den
angegebenen von der
Geometrie haben.
Z.B.: Umkreis von
X Kilometern
X
Ausgabe wäre in
diesem Fall die
Geometrie des
grünen Kreises
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
49 49
Beispiel - NRW
Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02Till Baberg - GIS-Seminar - SS 02 - SQL und Simple Features - 13.06.02
50 50
Beispiele
Intersection():Geometry
Union():Geometry
Difference():Geometry
SymDifference():Geometry
A BA B
A BA B
A B A B(A-B)(B-A)
A B A B
A-B B-A