GENUINE PARTS Generator Engine Oil

Size Application 1 Quart/946 mL 1 Gallon/3.785 L 5 Gallons/18.927 L 55 Gallons/208.198 L 275 Gallons/1041 L

Oil Type KOHLER Genuine Oil Part Number

5W-30 Synthetic Gasoline & Gaseous GM103159‡ NA GM103161 GM103162 GM103163

5W-40 Synthetic Diesel NA GM103165‡ GM103166 GM103167 GM103168

10W-40 Synthetic Gaseous GM105292 GM105293 GM105294 GM105295 GM105296

15W-40 Synthetic Gaseous NA GM103170 GM103171 GM103172 GM103173

15W-40 Conventional Diesel NA NA GM114081 GM114082 GM114083

KOHLERPOWER.COM PRINTED IN U.S.A. G12-489 6/20 © 2020 KOHLER CO.

When you need your generator to run, there’s no room for downtime. That’s why your choice of oil matters. Fully synthetic and engineered specifically for industrial, mobile, marine and home generator applications, KOHLER® genuine oils contain additives that help your generator stay in optimal working condition, which can lower your total cost of ownership.

‡Add -CAN to part number for shipment from Canadian warehouse location. To purchase KOHLER genuine oils and to inquire about bulk oil, please contact your local KOHLER generator distributor or dealer.

Maximize Performance. Reduce Downtime.

10W-40SAE

ONE U.S. GALLON (3.784 L)

Advanced Technology for Gaseous-Fueled Generators

100% SYNTHETIC ENGINE OIL

*The properties shown are typical values and are not intended to be used as quality assurance. Production will conform to Kohler's specifications, but variations may occur and specifications are subject to change without notice.

SAE Grade SAE 5W-30 SAE 5W-40 SAE 10W-40 SAE 15W-40

VISCOSITY 100C°, cSt 10.4 15.2 14.5 14.6

VISCOSITY 40C°, cSt 56.7 93.2 95.3 100.2

COLD CRANK SIMULATOR, cP 3877 (-30ºC) 6179 (-30ºC) 5106 (-25ºC) 3960 (-20ºC)

NOACK (wt loss) 13.6% 10.6% 3.4% 6.4%

TOTAL BASE NUMBER (TBN) 8.4 10.1 5.7 5.7

HTHS (cP) 3.1 4.2 4.1 4.2

SULFATED ASH (wt) 0.99% 1.00% 0.60% 0.46%

TYPICAL PROPERTIES*

Viscosity Index Lubricity Volatility (Reduces Consumption)

Hydrolytic Stability (Resists Acid Formation)

Oxidation Stability Thermal Stability (Maintains Viscosity)

Petroleum Compatibility

SYNTHETIC OIL √ √ √ √ √ √ √CONVENTIONAL OIL o o o o o o √

†It is generally accepted that synthetic lubricants outperform conventional lubricants in most applications. Results may vary based on tests and generator performance. Claims are compared with conventional base oils used in the same applications.

SYNTHETIC BASE OIL OUTPERFORMS CONVENTIONAL BASE OIL IN THESE PROPERTIES†

PACKAGING SIZES AND PART NUMBERS