HRT - HEAT RESISTANT TECHNOLOGYXTRA Long Life Contact Tip

● Superior hardness and wear resistance.● High electrical conduc�vity for improved arc transfer and arc star�ng

compared to other copper alloy �ps.● High performance, unaffected by higher opera�ng temperatures.● Outperforms other Tip Materials

◦ 5X the life over C12200 copper◦ 3X the life over CRZR and CUCRZR

● Mandrel Drawn for superior bore tolerance and finish.● Substan�ally increases schedule cycle �me �p change-outs.● Lower opera�ng costs and reduce down�me from arc failures and

unscheduled �p changes.● Manufactured in Sharon Center, Ohio.

Genuine American Weldquip heavy-duty thread-on nozzles, contact �ps and diffusers work together to provide added durability, extended life, cooler opera�on and superior electrical conduc�vity.

AMERICAN WELDQUIP’S CONSUMABLE SYSTEM

HEAVY WALLED NOZZLES Machined from solid brass or copper bar stock.

Thread-on design for durability and excellent heat transfer characteris�c.Straight inside bore provides a thick wall for superior life.

Available in Nickel plate or bare finish.

LINERSManufactured with high carbon music wire for added durabilty. For excellent feed characteris�c all liners are �n-zinc coated and have smooth inside profiles.

COMMONIZE CONSUMABLESAll American Weldquip torches have a common consumable pla�orm.

This means you can reduce your inventory requirements by u�lizing the same consumables across different torch models.

GAS DIFFUSER SYSTEM All diffusers are manufactured in brass.Precision-machined to �ght tolerances.

Designed for maximum and efficient gas flow.

www.weldquip.com

CONTACT TIPS Available in high conduc�ve DSP copper and HRT Materials.

Precision-machined with �ghtly held tolerances.Special design thread to keep the �p �ght.

Mandrel drawn ID and OD for �ght tolerences and smooth inside bore finish.

MADE IN THE USAManufactured By American Weldquip In Sharon Center, Ohio

So You Are Always Guaranteed Of Quality You Can Trust.

AMERICAN WELDQUIP’S CONSUMABLESCONTACT TIPS

www.weldquip.com

PACKAGE QUANTITY OF 25, 100 and 1500 - ORDER PER PIECE PACKAGE NOM.

WIRE SIZE PART # QUANTITY I.D. DESCRIPTION DIM “A” DIM “B” DIM “C”.023" (.6mm) 75023511-25 25 .034" CONTACT TIP (STANDARD) .285" .897" 1.25” .023" (.6mm) 75023511 100 .034" CONTACT TIP (STANDARD) .285" .897" 1.25” .023" (.6mm) 75023511-1500 1500 .034" CONTACT TIP (STANDARD) .285" .897" 1.25” .030" (.8mm) 75030511-25 25 .038" CONTACT TIP (STANDARD) .285" .897" 1.25” .030" (.8mm) 75030511 100 .038" CONTACT TIP (STANDARD) .285" .897" 1.25” .030" (.8mm) 75030511-1500 1500 .038" CONTACT TIP (STANDARD) .285" .897" 1.25” .035" (.9mm) 75035511-25 25 .044" CONTACT TIP (STANDARD) .285" .897" 1.25” .035" (.9mm) 75035511 100 .044" CONTACT TIP (STANDARD) .285" .897" 1.25” .035" (.9mm) 7503551-1500 1500 .044" CONTACT TIP (STANDARD) .285" .897" 1.25” .040" (1.0mm) 75040511-25 25 .050" CONTACT TIP (STANDARD) .285" .897" 1.25” .040" (1.0mm) 75040511 100 .050" CONTACT TIP (STANDARD) .285" .897" 1.25” .040" (1.0mm) 75040511-1500 1500 .050" CONTACT TIP (STANDARD) .285" .897" 1.25” .045" (1.2mm ) 75045511-25 25 .053" CONTACT TIP (STANDARD) .285" .897" 1.25” .045" (1.2mm ) 75045511 100 .053" CONTACT TIP (STANDARD) .285" .897" 1.25” .045" (1.2mm ) 75045511-1500 1500 .053" CONTACT TIP (STANDARD) .285" .897" 1.25”

PACKAGE QUANTITY OF 25, 100 and 1500 - ORDER PER PIECE PACKAGE NOM.

WIRE SIZE PART # QUANTITY I.D. DESCRIPTION DIM “A” DIM “B” DIM “C”.030" (.8mm) 75030511T-25 25 . 038" CONTACT TIP (STANDARD) .285" .897" 1.25”

.030" (.8mm) 75030511T 100 .038" CONTACT TIP (STANDARD) .285" .897" 1.25”

.030" (.8mm) 75030511T-1500 1500 .038" CONTACT TIP (STANDARD) .285" .897" 1.25”

.035" (.9mm) 75035511T-25 25 .044" CONTACT TIP (STANDARD) .285" .897" 1.25”

.035" (.9mm) 75035511T 100 .044" CONTACT TIP (STANDARD) .285" .897" 1.25”

.035" (.9mm) 75035511T-1500 1500 .044" CONTACT TIP (STANDARD) .285" .897" 1.25”

.040" (1.0mm) 75040511T-25 25 .050" CONTACT TIP (STANDARD) .285" .897" 1.25”

.040" (1.0mm) 75040511T 100 .050" CONTACT TIP (STANDARD) .285" .897" 1.25”

.040" (1.0mm) 75040511T-1500 1500 .050" CONTACT TIP (STANDARD) .285" .897" 1.25”

.045" (1.2mm ) 75045511T-25 25 .053" CONTACT TIP (STANDARD) .285" .897" 1.25”

.045" (1.2mm ) 75045511T 100 .053" CONTACT TIP (STANDARD) .285" .897" 1.25”

.045" (1.2mm ) 75045511T-1500 1500 .053" CONTACT TIP (STANDARD) .285" .897" 1.25”

AMERICAN WELDQUIP STANDARD DUTY COPPER (CU) - M6 THREAD

AMERICAN WELDQUIP TAPERED STANDARD DUTY COPPER (CU) - M6 THREAD

HOW TO ORDER

American Weldquip Contact Tips Are Only Manufactured UsingHigh-Quaility, Highly Conduc�ve Copper Materials.

Tips Are Available In DSP Copper and Special Extended Life HRT (Heat Resistant Technology) Materials.

All Contact Tips Are CNC Precision-Machined With Tightly Held Tolerances and Offer A Special Thread Design To Keep Tips Tight.

All Tip Material Outside and Inside Diameters Are Mandrel Drawn For Tight Tolerance and A Smooth Inside Bore Finish.

BC

A

BC

A

AMERICAN WELDQUIP’S CONSUMABLESCONTACT TIPS

www.weldquip.com

PACKAGE QUANTITY OF 25, 100 and 1500 - ORDER PER PIECE PACKAGE NOM.

WIRE SIZE PART # QUANTITY I.D. DESCRIPTION DIM “A” DIM “B” DIM “C”.030" (.8mm) 75030014-25 25 .038" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” .030" (.8mm) 75030014 100 .038" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” .030" (.8mm) 75030014-1500 1500 .038" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” 035" (.9mm) 75035014-25 25 .044" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” 035" (.9mm) 75035014 100 .044" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” 035" (.9mm) 75035014-1500 1500 .044" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” .040" (1.0mm) 75040014-25 25 .050" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” .040" (1.0mm) 75040014 100 .050" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” .040" (1.0mm) 75040014-1500 1500 .050" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” .045" (1.2mm ) 75045014-25 25 .054" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” .045" (1.2mm ) 75045014 100 .054" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” .045" (1.2mm ) 75045014-1500 1500 .054" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” 3/64"(1.2mm ) 75047014-25 25 .057 CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” 3/64"(1.2mm ) 75047014 100 .057 CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” 3/64"(1.2mm ) 75047014-1500 1500 .057 CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” .052" (1.3mm) 75052014-25 25 .061" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” .052" (1.3mm) 75052014 100 .061" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” .052" (1.3mm) 75052014-1500 1 500 .061" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” 1/16" (1.6mm) 75062014-25 25 .073" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” 1/16" (1.6mm) 75062014 100 .073" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” 1/16" (1.6mm) 75062014-1500 1500 .073" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” 1/16" (1.6mm) 75062015-25 25 .076" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” 1/16" (1.6mm) 75062015 100 .076" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” 1/16" (1.6mm) 75062015-1500 1500 .076" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” 5/64" (2.0 mm) 75078014-25 25 .087" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” 5/64" (2.0 mm) 75078014 100 .087" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” 5/64" (2.0 mm) 75078014-1500 1500 .087" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” 3/32" (2.4mm) 75093014-25 25 .106" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” 3/32" (2.4mm) 75093014 100 .106" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22” 3/32" (2.4mm) 75093014-1500 1500 .106" CONTACT TIP (HEAVY DUTY) .345" .908" 1.22”

AMERICAN WELDQUIP HEAVY DUTY - M8 THREADHOW TO ORDER

OEM BRAND COMPATIBLE CONTACT TIPS

BINZEL® COMPATIBLE CONTACT TIPS (M8 Thread)PACKAGE QUANTITY OF 25, 100 and 1500 - ORDER PER PIECE

PACKAGE NOM. WIRE SIZE PART # QUANTITY I.D. DESCRIPTION DIM “A” DIM “B” DIM “C” .035" (.9mm) 20035230-25 25 .044" BINZEL® STYLE CONTACT TIP .393" .775" 1.09”.035" (.9mm) 20035230 100 .044" BINZEL® STYLE CONTACT TIP .393" .775" 1.09”.035" (.9mm) 20035230-1500 1500 .044" BINZEL® STYLE CONTACT TIP .393" .775" 1.09”.045" (1.2mm) 20045230-25 25 .054" BINZEL® STYLE CONTACT TIP .393" .775" 1.09”.045" (1.2mm) 20045230 100 .054" BINZEL® STYLE CONTACT TIP .393" .775" 1.09”.045" (1.2mm) 20045230-1500 1500 .054" BINZEL® STYLE CONTACT TIP .393" .775" 1.09”.052" (1.3mm) 20052230-25 25 .061" BINZEL® STYLE CONTACT TIP .345" .775" 1.09”.052" (1.3mm) 20052230 100 .061" BINZEL® STYLE CONTACT TIP .345" .775" 1.09”.052" (1.3mm) 20052230-1500 1500 .061" BINZEL® STYLE CONTACT TIP .345" .775" 1.09”1/16" (1.6mm) 20062230-25 25 .069" BINZEL® STYLE CONTACT TIP .345" .775" 1.09”1/16" (1.6mm) 20062230 100 .069" BINZEL® STYLE CONTACT TIP .345" .775" 1.09”1/16" (1.6mm) 20062230-1500 1500 .069" BINZEL® STYLE CONTACT TIP .345" .775" 1.09”5/64" (2.0mm) 20078230-25 25 .087" BINZEL® STYLE CONTACT TIP .345" .775" 1.09”5/64" (2.0mm) 20078230 100 .087" BINZEL® STYLE CONTACT TIP .345" .775" 1.09”5/64" (2.0mm) 20078230-1500 1500 .087" BINZEL® STYLE CONTACT TIP .345" .775" 1.09”

BC

A

BC

A

AMERICAN WELDQUIP’S CONSUMABLES - CONTACT TIPS

www.weldquip.com

PACKAGE QUANTITY OF 25, 100 and 1500 - ORDER PER PIECE PACKAGE NOM.

WIRE SIZE PART # QUANTITY I.D. DESCRIPTION DIM “A” DIM “B” DIM “C”.035" (.9mm) G621-0397-25 25 .044" MK® STYLE CONTACT TIP .345" 1.070" 1.57”

G621-0397 100 .044" MK® STYLE CONTACT TIP .345" 1.070" 1.57” G621-0397-1500 1500 .044" MK® STYLE CONTACT TIP .345" 1.070" 1.57”

3/64" (1.3mm) G621-0393-25 25 .061" MK® STYLE CONTACT TIP .345" 1.070" 1.57”G621-0393 100 .061" MK® STYLE CONTACT TIP .345" 1.070" 1.57”G621-0393-1500 1500 .061" MK® STYLE CONTACT TIP .345" 1.070" 1.57”

1/16" (1.6mm) G621-0394-25 25 .073" MK® STYLE CONTACT TIP .345" 1.070" 1.57” G621-0394 100 .073" MK® STYLE CONTACT TIP .345" 1.070" 1.57” G621-0394-1500 1500 .073" MK® STYLE CONTACT TIP .345" 1.070" 1.57”

5/64" (2.0 mm) G621-0395-25 25 .087" MK® STYLE CONTACT TIP .345" 1.070" 1.57” G621-0395 100 .087" MK® STYLE CONTACT TIP .345" 1.070" 1.57” G621-0395-1500 1500 .087" MK® STYLE CONTACT TIP .345" 1.070" 1.57”

MK® COMPATIBLE CONTACT TIPS

OTC®, PANASONIC®, TOKINARC® COMPATIBLE CONTACT TIPS (M6 Thread)

BC

A

B

C

A

BC

A

HOW TO ORDER

.030" (.8mm) 75030122-25 25 .038" OTC®, PANASONIC®, TOKINARC® .345" 1.458" 1.77” 75030122 100 .038" OTC®, PANASONIC®, TOKINARC® .345" 1.458" 1.77” 75030122-1500 1500 .038" OTC®, PANASONIC®, TOKINARC® .345" 1.458" 1.77”

.035" (.9mm) 75035122-25 25 .044" OTC®, PANASONIC®, TOKINARC® .345" 1.458" 1.77” 75035122 100 .044" OTC®, PANASONIC®, TOKINARC® .345" 1.458" 1.77” 75035122-1500 1500 .044" OTC®, PANASONIC®, TOKINARC® .345" 1.458" 1.77”

.045" (1.2mm) 75045122-25 25 .054" OTC®, PANASONIC®, TOKINARC® .345" 1.458" 1.77” 75045122 100 .054" OTC®, PANASONIC®, TOKINARC® .345" 1.458" 1.77” 75045122-1500 1500 .054" OTC®, PANASONIC®, TOKINARC® .345" 1.458" 1.77”

.052" (1.3mm) 75052122-25 25 .061 OTC®, PANASONIC®, TOKINARC® .345" 1.458" 1.77” 75052122 100 .061 OTC®, PANASONIC®, TOKINARC® .345" 1.458" 1.77” 75052122-1500 1500 .061 OTC®, PANASONIC®, TOKINARC® .345" 1.458" 1.77”

.030" (.8mm) 75030211-25 25 .038" OTC®, PANASONIC®, TOKINARC® .345" 1.310" 1.66” 75030211 100 .038" OTC®, PANASONIC®, TOKINARC® .345" 1.310" 1.66” 75030211-1500 1500 .038" OTC®, PANASONIC®, TOKINARC® .345" 1.310" 1.66”

.035" (.9mm) 75035211-25 25 .044" OTC®, PANASONIC®, TOKINARC® .345" 1.310" 1.66” 75035211 100 .044" OTC®, PANASONIC®, TOKINARC® .345" 1.310" 1.66” 75035211-1500 1500 .044" OTC®, PANASONIC®, TOKINARC® .345" 1.310" 1.66”

.040" (1.0mm) 75040211-F-25 25 .050" OTC® PANASONIC®, TOKINARC® .345" 1.310" 1.66” 75040211-F 100 .050" OTC® PANASONIC®, TOKINARC® .345" 1.310" 1.66” 75040211-F-1500 1500 .050" OTC® PANASONIC®, TOKINARC® .345" 1.310" 1.66”

.045" (1.2mm) 75045211-25 25 .054" OTC®, PANASONIC®, TOKINARC® .345" 1.310” 1.66” 75045211 100 .054" OTC®, PANASONIC®, TOKINARC® .345" 1.310" 1.66” 75045211-1500 1500 .054" OTC®, PANASONIC®, TOKINARC® .345" 1.310" 1.66”

.044" (1.2mm) 75045211-F-25 25 .054" OTC® PANASONIC®, TOKINARC® .345" 1.310" 1.66” 75045211-F 100 .054" OTC® PANASONIC®, TOKINARC® .345" 1.310" 1.66” 75045211-F-1500 1500 .054" OTC® PANASONIC®, TOKINARC® .345" 1.310" 1.66”

.052" (1.3mm) 75052211-25 25 .061" OTC®, PANASONIC®, TOKINARC® .345" 1.310" 1.66” 75052211 100 .061" OTC®, PANASONIC®, TOKINARC® .345" 1.310" 1.66” 75052211-1500 1500 .061" OTC®, PANASONIC®, TOKINARC® .345" 1.310" 1.66”

.062" (1.6mm) 75062211-25 25 .073" OTC®, PANASONIC®, TOKINARC® .345" 1.310" 1.66” 75062211 100 .073" OTC®, PANASONIC®, TOKINARC® .345" 1.310" 1.66” 75062211-1500 1500 .073" OTC®, PANASONIC®, TOKINARC® .345" 1.310" 1.66”

.035" (.9mm) 75035511V-25 25 .044" OTC®, PANASONIC®, TOKINARC® .285" 1.310" 1.66” 75035511V 100 .044" OTC®, PANASONIC®, TOKINARC® .285" 1.310" 1.66” 75035511V-1500 1500 .044" OTC®, PANASONIC®, TOKINARC® .285" 1.310" 1.66”

.040" (1.0mm) 75040511V-25 25 .050" OTC®, PANASONIC®, TOKINARC® .285" 1.310" 1.66” 75040511V 100 .050" OTC®, PANASONIC®, TOKINARC® .285" 1.310" 1.66” 75040511V-1500 1500 .050" OTC®, PANASONIC®, TOKINARC® .285" 1.310" 1.66”

.045" (1.2mm) 75045511V-25 25 .053" OTC®, PANASONIC®, TOKINARC® .285" 1.310" 1.66” 75045511V 100 .053" OTC®, PANASONIC®, TOKINARC® .285" 1.310" 1.66” 75045511V-1500 1500 .053" OTC®, PANASONIC®, TOKINARC® .285" 1.310" 1.66”

PACKAGE QUANTITY OF 25, 100 and 1500 - ORDER PER PIECE PACKAGE NOM.

WIRE SIZE PART # QUANTITY I.D. DESCRIPTION DIM “A” DIM “B” DIM “C”

BC

A

AMERICAN WELDQUIP’S CONSUMABLESHRT - “HEAT RESISTANT TECHNOLOGY”

EXTENDED LIFE CONTACT TIPS

www.weldquip.com

NEW Advanced Contact Tip Technology for High Wear Resistance and Superior Electrical Conductivity

What is HRT – Heat Resistant TechnologyHeat generated from the welding process is a major influence affec�ng your contact �p life. This heat tends to anneal and so�en the copper �p materialthus, increasing the weld wire abrasion, micro arcing, and decreased conduc�vity on the ID bore causing premature �p failure. The higher theopera�ng temperature the worse the performance. Different �p material formula�ons, such as Copper Chrome Zirconium, have been used over the years to increase hardness and help improve �p life.

While the introduc�on of different �p materials may improve wear resistance in certain applica�ons, the harder material witha higher annealing temperature sacrifices electrical conduc�vity which can lead to poor arc star�ng characteris�cs. The NEW AMERICAN WELDQUIP HRT contact �ps are engineered to provide unsurpassed resistance to annealing at high opera�ng temperatures while maintaining excellent electrical conduc�vity. The outer shell of the �p is made from highly conduc�ve copper for superior electrical conduc�vity. The inside diameter is comprised of mechanically alloyed copper based compounds.These special copper based composite materials provide a stable microstructure at elevated opera�ng temperatures guaranteeingthe high hardness, wear resistance and high electrical conduc�vity. The �p material is then produced by cold pressing the outerhighly conduc�ve copper and the inside diameter composite material. The final finished copper rod is then mandrel extruded to insure a finished �p with excellent ID surface finish and concentricity.

Hardness at Operating Temperatures

Superior Hardness and Wear Resistance.

High Electrical Conduc�vity For Improved Arc Transfer and Arc Star�ngAs Compared To Other Copper Alloy Tips.

High Performance, Unaffected By Higher Opera�ng Temperatures.

Outperforms Other Tip Materials.5XThe Life Over C12200 Copper3X The Life Over CRZR and CUCRZR

Mandrel Drawn For Superior Bore Tolerance and Finish.

Substan�ally Increases Scheduled Cycle Time Tip Change-Outs.

Lower Opera�ng Costs and Reduce Down�me From Arc Failures andUnscheduled Tip Changes.

Manufactured In Our Sharon Center, Ohio USA Facility.

AMERICAN WELDQUIP’S CONSUMABLESHRT - “HEAT RESISTANT TECHNOLOGY” CONTACT TIPS

www.weldquip.com

PACKAGE QUANTITY OF 25, 100 and 500 - ORDER PER PIECE PACKAGE NOM.

WIRE SIZE PART # QUANTITY I.D. DESCRIPTION DIM “A” DIM “B” DIM “C”HRT - .315" (8mm) OD .030" (.8mm) 20030400-25 25 .037" HRT CONTACT TIP (STD) .315" .908" 1.22”

20030400 100 .037" HRT CONTACT TIP (STD) .315" .908" 1.22”20030400-500 500 .037" HRT CONTACT TIP (STD) .315" .908" 1.22”

.035" (.9mm) 20035400-25 25 .041" HRT CONTACT TIP (STD) .315" .908" 1.22”20035400 100 .041" HRT CONTACT TIP (STD) .315" .908" 1.22”20035400-500 500 .041" HRT CONTACT TIP (STD) .315" .908" 1.22”

.040" (1.0mm) 20040400-25 25 .050" HRT CONTACT TIP (STD) .315" .908" 1.22”20040400 100 .050" HRT CONTACT TIP (STD) .315" .908" 1.22”20040400-500 500 .050" HRT CONTACT TIP (STD) .315" .908" 1.22”

.045" (1.2mm) 20045400-25 25 .054" HRT CONTACT TIP (STD) .315" .908" 1.22”20045400 100 .054" HRT CONTACT TIP (STD) .315" .908" 1.22”20045400-500 500 .054" HRT CONTACT TIP (STD) .315" .908" 1.22”

.052" (1.3mm) 20052400TT-25 25 .057 TT HRT CONTACT TIP (STD) .315" .908" 1.22”20052400TT 100 .057 TT HRT CONTACT TIP (STD) .315" .908" 1.22”20052400TT-500 500 .057 TT HRT CONTACT TIP (STD) .315" .908" 1.22”

HRT - .394" (10mm) OD .035" (.9mm) 20035500-25 25 .041" HRT CONTACT TIP (HD) .393" .775" 1.092”

20035500 100 .041" HRT CONTACT TIP (HD) .393" .775" 1.092”20035500-500 500 .041" HRT CONTACT TIP (HD) .393" .775" 1.092”

.035" (.9mm) 20035500T-25 25 .041" HRT CONTACT TIP (HD) .393" .775" 1.092”20035500T 100 .041" HRT CONTACT TIP (HD) .393" .775" 1.092”20035500T-500 500 .041" HRT CONTACT TIP (HD) .393" .775" 1.092”

.040" (1.0mm) 20040500-25 25 .050" HRT CONTACT TIP (HD) .393" .775" 1.092”20040500 100 .050" HRT CONTACT TIP (HD) .393" .775" 1.092”20040500-500 500 .050" HRT CONTACT TIP (HD) .393" .775" 1.092”

.040" (1.0mm) 20040500T-25 25 .050" HRT CONTACT TIP (HD) .393" .775" 1.092”20040500T 100 .050" HRT CONTACT TIP (HD) .393" .775" 1.092”20040500T-500 500 .050" HRT CONTACT TIP (HD) .393" .775" 1.092”

.045" (1.2mm) 20045500-25 25 .054" HRT CONTACT TIP (HD) .393" .775" 1.092”20045500 100 .054" HRT CONTACT TIP (HD) .393" .775" 1.092”20045500-500 500 .054" HRT CONTACT TIP (HD) .393" .775" 1.092”

.045" (1.2mm) 20045500T-25 25 .054" HRT CONTACT TIP (HD) .393" .775" 1.092”20045500T 100 .054" HRT CONTACT TIP (HD) .393" .775" 1.092”20045500T-500 500 .054" HRT CONTACT TIP (HD) .393" .775" 1.092”

.052" (1.3mm) 20052500-25 25 .061" HRT CONTACT TIP (HD) .393" .775" 1.092”20052500 100 .061" HRT CONTACT TIP (HD) .393" .775" 1.092”20052500-500 500 .061" HRT CONTACT TIP (HD) .393" .775" 1.092”

.052" (1.3mm) 20052500T-25 25 .061" HRT CONTACT TIP (HD) .393" .775" 1.092”20052500T 100 .061" HRT CONTACT TIP (HD) .393" .775" 1.092”20052500T-500 500 .061" HRT CONTACT TIP (HD) .393" .775" 1.092”

.052" (1.3mm) 20052500TT-25 25 .057" TT HRT CONTACT TIP (HD) .393" .775" 1.092”20052500TT 100 .057" TT HRT CONTACT TIP (HD) .393" .775" 1.092”20052500TT-500 500 .057" TT HRT CONTACT TIP (HD) .393" .775" 1.092”

1/16" (1.6mm) 20062500-25 25 .069" HRT CONTACT TIP (HD) .393" .775" 1.092”20062500 100 .069" HRT CONTACT TIP (HD) .393" .775" 1.092”20062500-500 500 .069" HRT CONTACT TIP (HD) .393" .775" 1.092”

AMERICAN WELDQUIP HEAVY DUTY - M8 THREADHOW TO ORDER

PACKAGE QUANTITY OF 25, 100 and 500 - ORDER PER PIECE PACKAGE NOM.

WIRE SIZE PART # QUANTITY I.D. DESCRIPTION DIM “A” DIM “B” DIM “C” .030" (.8mm) 20030411-25 25. 038" OTC®, PANASONIC®, TOKINARC® .315" 1.310" 1.66”

20030411 100 .038" OTC®, PANASONIC®, TOKINARC® .315" 1.310" 1.66” 20030411-500 500 .038" OTC®, PANASONIC®, TOKINARC® .315" 1.310" 1.66”

.035" (.9mm) 20035411-25 25 .044" OTC®, PANASONIC®, TOKINARC® .315" 1.310" 1.66” 20035411 100 .044" OTC®, PANASONIC®, TOKINARC® .315" 1.310" 1.66” 20035411-500 500 .044" OTC®, PANASONIC®, TOKINARC® .315" 1.310" 1.66”

.040" (1.0mm) 20040411-25 25 .050" OTC®, PANASONIC®, TOKINARC® .315" 1.310" 1.66” 20040411 100 .050" OTC®, PANASONIC®, TOKINARC® .315" 1.310" 1.66” 20040411-500 500 .050" OTC®, PANASONIC®, TOKINARC® .315" 1.310" 1.66”

.045" (1.2mm) 20045411-25 25 .054" OTC®, PANASONIC®, TOKINARC® .315" 1.310" 1.66” 20045411 100 .054" OTC®, PANASONIC®, TOKINARC® .315" 1.310" 1.66” 20045411-500 500 .054" OTC®, PANASONIC®, TOKINARC® .315" 1.310" 1.66”

OTC®, PANASONIC®, TOKINARC® COMPATIBLE CONTACT TIPS (M6 Thread)

BC

A

BC

A

T - Tapered Version

BC

A

B

C

A

AMERICAN WELDQUIP’S CONSUMABLESGAS DIFFUSERS

www.weldquip.com

PACKAGE QUANTITY(Order In Mul�ples) OF 5 - ORDER PER PIECE TIP RELATIONSHIP TO OVERALL

PART # DESCRIPTION THREAD STANDARD LENGTH LENGTH

OTC®/PANASONIC®/TOKINARC®

75077405 ROBOTIC TIP HOLDER M6 NA NA

75077409 ROBOTIC TIP HOLDER M6 NA NA

G016051 ROBOTIC TIP ADAPTOR TOKIN TK-308RR M6 NA NA

GDX0201162 ROBOTIC TIP ADAPTOR TOKINARC M6 NA NA

TREGASKISS®

G404-3-M8 RETAINING HEAD - For Use Q/ AWQ Tips M8 NA NA

G404-3-M8L RETAINING HEAD - For Use Q/ AWQ Tips M8 NA NA

FRONIUS - MINIMUM ORDER QUANTITIES MAY APPLY

G4200013928-AWQ RETAINING HEAD - For Use Q/ AWQ Tips M8 NA NA

G4200015122-AWQ RETAINING HEAD - For Use Q/ AWQ Tips M8 NA NA

G4200015540-AWQ RETAINING HEAD - For Use Q/ AWQ Tips M8 NA NA

G4200015605-AWQ RETAINING HEAD - For Use Q/ AWQ Tips M8 NA NA

AMERICAN WELDQUIP GAS DIFFUSERS

OEM BRAND COMPATIBLE GAS DIFFUSER/TIP HOLDERS

HOW TO ORDER

All diffusers are manufactured in brass.

Precision-machined to �ght tolerances.

Designed for maximum and efficient gas flow.

Manufactured In Our Sharon Center, Ohio USA Facility

PACKAGE QUANTITY(Order In Mul�ples) OF 5 - ORDER PER PIECE TIP RELATIONSHIP TO OVERALL

PART # DESCRIPTION THREAD STANDARD LENGTH LENGTH

75002007S GAS DIFFUSER - SHORT M6 -0.060" 1.160" (29.5mm)75002007 GAS DIFFUSER - STANDARD M6 0.000" 1.220" (31.0mm)75002007L GAS DIFFUSER - LONG M6 +0.120" 1.340" (34.0mm)75002007XL GAS DIFFUSER - XLONG M6 0.164 “ 1.385" (35.2mm)75002033A GAS DIFFUSER - (347 TO 400 ADAPTOR) M8 -0.025" 1.195" (30.4mm)

75002007V GAS DIFFUSER - (MALE THREAD) M6 N/A 1.000" (25.4mm)

75004033S GAS DIFFUSER - SHORT M8 -0.163" 1.275" (32.4mm)75004033 GAS DIFFUSER - STANDARD M8 0.000" 1.438" (36.5mm)75004033-GL TIP HOLDER - GASLESS M8 N/A 1.438" (36.5mm)75004033L GAS DIFFUSER - LONG M8 +0.092" 1.530" (38.9mm)75004033XL GAS DIFFUSER - X-LONG M8 +0.218" 1.656" (42.1mm)75004007 GAS DIFFUSER - STD. (400 TO 300 ADPTR.) M6 +0.018" 1.455" (37.0mm)75004033V GAS DIFFSER - X-LONG (400 TO 300 ADPTR.) M6 +0.312" 1.750" (44.5mm)

75004033A GAS DIFFUSER - SHORT (MALE THREAD) M8 N/A 1.031" (26.2mm)

For Use With Model #'s 238 / 307 /347 Torches

For Use With Model #'s 354/400/407/450/454/500/507/550/600/607 Torches

AMERICAN WELDQUIP’S CONSUMABLESLINERS

www.weldquip.com

Manufactured From High Carbon Music Wire For Added Durabilty.

Tin-Zinc Coated For Improved Feedability.

Smooth Inside Profiles For Smooth Wire Feed Characteris�cs.

Liners For Mild Steel, Stainless Steel, Aluminum and Flux Core Wires.

PART # LENGTH I.D. WIRE SIZE APPLICATION DESCRIPTION '215' SERIES STEEL LINER - .023" - .030" WHITE IDENTIFICATION75005215T 5' .057" .023"-.030" MS,SS HIGH CARBON STEEL-ROUND WOUND 75010215T 10' .057" .023"-.030" MS,SS HIGH CARBON STEEL-ROUND WOUND 75015215T 15' .057" .023"-.030" MS,SS HIGH CARBON STEEL-ROUND WOUND

'222' SERIES STEEL LINER - .035" - .045" RED IDENTIFICATION75001222T 1' .069" .035"-.045" MS,SS HIGH CARBON STEEL-ROUND WOUND 75005222T 5' .069" .035"-.045" MS,SS HIGH CARBON STEEL-ROUND WOUND 75010222T 10' .069" .035"-.045" MS,SS HIGH CARBON STEEL-ROUND WOUND 75015222T 15' .069" .035"-.045" MS,SS HIGH CARBON STEEL-ROUND WOUND75025222T 25' .069" .035"-.045" MS,SS HIGH CARBON STEEL-ROUND WOUND

'228' SERIES STEEL LINER - .045" - 1/16" BLUE IDENTIFICATION75001228T 1' .080" .045"-.062" MS,SS,FC HIGH CARBON STEEL - ROUND WOUND 75005228T 5' .080" .045"-.062" MS,SS,FC HIGH CARBON STEEL - ROUND WOUND 75010228T 10' .080" .045"-.062" MS,SS,FC HIGH CARBON STEEL - ROUND WOUND75015228T 15' .080" .045"-.062" MS,SS,FC HIGH CARBON STEEL - ROUND WOUND 75025228T 25' .080" .045"-.062" MS,SS,FC HIGH CARBON STEEL - ROUND WOUND

'229' SERIES STEEL LINER - 5/64" - 3/32" BLACK IDENTIFICATION75001229T 1' .114" .078"-.093" MS,FC HIGH CARBON STEEL -D SHAPED LINER 75005229T 5' .114" .078"-.093" MS,FC HIGH CARBON STEEL -D SHAPED LINER 75010229T 10' .114" .078"-.093" MS,FC HIGH CARBON STEEL -D SHAPED LINER 75015229T 15' .114" .078"-.093" MS,FC HIGH CARBON STEEL -D SHAPED LINER 75025229T 25' .114" .078"-.093" MS,FC HIGH CARBON STEEL -D SHAPED LINER

ALUMINUM WIRE APPLICATIONS-'320' SERIES TEFLON LINER - .035"-.045"75005320T-J 5' .062 .035"-.045" ALUMINUM TEFLON W/ JUMP LINER75010320T-J 10' .062 .035"-.045" ALUMINUM TEFLON W/ JUMP LINER75005320T 5' .062 .035"-.045" ALUMINUM TEFLON75010320T 10' .062 .035"-.045" ALUMINUM TEFLON

ALUMINUM WIRE APPLICATIONS-'324' SERIES NYLON LINER - .045"-.062"75005324T-J 5' .105" .045"-.062" ALUMINUM NYLON W/ JUMP LINER 75010324T-J 10' .105" .045"-.062" ALUMINUM NYLON W/ JUMP LINER 75015324T-J 15' .105" .045"-.062" ALUMINUM NYLON W/ JUMP LINER 75099324 1000' .105" .045"-.062" ALUMINUM BULK '324' NYLON LINER MATERIAL 75001324T 1' .105" .045"-.062" ALUMINUM NYLON 75005324T 5' .105" .045"-.062" ALUMINUM NYLON 75010324T 10' .105" .045"-.062" ALUMINUM NYLON 75015324T 15' .105" .045"-.062" ALUMINUM NYLON

HOW TO ORDER

PART # DESCRIPTION

75077052-AE LINER ADAPTOR COLLET - EURO TO "T" STYLE LINER

75077052-AH LINER ADAPTOR COLLET - "H' TO "T" STYLE Liner

75000001 ORING - "T" STYLE LINER

75000002 ORING - EURO AND "H" STYLE LINER

750324-J 12" BRONZE JUMP LINER

AST-950-228 FLOATING LINER COLLET - FOR USE WITH GOOSENECK LINER ON AST ROBOTIC SYSTEMS

LINER REPLACEMENT PART LIST

AMERICAN WELDQUIP’S CONSUMABLESNOZZLES

www.weldquip.com

PART # DESCRIPTION TYPE BORE SIZE MATERIAL O.A.L. INSULATOR300 SERIES - For Use With Torch Model #'s 238 / 300 / 307NI PLATED BRASS75133801 NOZZLE - CONICAL A 3/8" (9.5mm) NI PLATED BRASS 2.820" (71.6mm) NONE REQ.75133802 NOZZLE - BOTTLE NOSE C 3/8" (9.5mm) NI PLATED BRASS 2.820" (71.6mm) NONE REQ.75133803 NOZZLE - BOTTLE NOSE C 3/8" (9.5mm) NI PLATED BRASS 3.62"(91.9mm) NONE REQ. 75135004 NOZZLE - SHORT TAPERED G 1/2" (12.7mm) NI PLATED BRASS 1.937" (49.2mm) NONE REQ. NI PLATED BRASS WITH INSULATOR 75135601-I NOZZLE - CONICAL A 9/16" (14.2mm) NI PLATED BRASS 2.820" (71.6mm) INSTALLED 75135602-I NOZZLE - CONICAL A 9/16" (14.2mm) NI PLATED BRASS 2.545" (64.6mm) INSTALLED 75135002-I NOZZLE - TAPERED B 1/2" (12.7mm) NI PLATED BRASS 2.820" (71.6mm) INSTALLED 75135003-I NOZZLE - BOTTLENOSE C 1/2" (12.7mm) NI PLATED BRASS 2.672" (67.96mm) INSTALLED 400 SERIES - For Use With Torch Model #'s 347/354/400/407/454/450/500/550/600/607NI PLATED BRASS75145001 NOZZLE - BOTTLE NOSE C 1/2" (12.7mm) NI PLATED BRASS 3.031" (77.0mm) 75001733 75145004 NOZZLE - BOTTLE NOSE C 1/2" (12.7mm) NI PLATED BRASS 3.125" (79.4mm) 75001733 75145005 NOZZLE - BOTTLE NOSE C 1/2" (12.7mm) NI PLATED BRASS 2.820" (71.6mm) 75001733 75145003 NOZZLE - TAPERED (LONG) B 1/2" (12.7mm) NI PLATED BRASS 3.915" (99.4mm) NONE REQ.75146202 NOZZLE - CONICAL A 5/8" (15.9mm) NI PLATED BRASS 3.125" (79.4mm) 7500173875147501 NOZZLE - CYLINDRICAL F 3/4" (19.0mm) NI PLATED BRASS 3.125" (79.4mm) 75001738 75146501S NOZZLE - SPOT H 5/8" (15.9mm) NI PLATED BRASS 3.437" (87.3mm) 75001738 NI PLATED BRASS WITH INSULATOR75144301-I NOZZLE - SMALL CONICAL D 7/16" (11.1mm) NI PLATED BRASS 2.820" (71.6mm) INSTALLED 75144302-I NOZZLE - SMALL CONICAL D 7/16" (11.1mm) NI PLATED BRASS 3.125" (79.4mm) INSTALLED 75145001-I NOZZLE - BOTTLE NOSE C 1/2" (12.7mm) NI PLATED BRASS 3.031" (77.0mm) INSTALLED 75145004-I NOZZLE - BOTTLE NOSE C 1/2" (12.7mm) NI PLATED BRASS 3.125" (79.4mm) INSTALLED75145005-I NOZZLE - BOTTLE NOSE C 1/2" (12.7mm) NI PLATED BRASS 2.820" (71.6mm) INSTALLED 75145601-I NOZZLE - TAPERED B 9/16" (14.2mm) NI PLATED BRASS 3.125" (79.4mm) INSTALLED 75145602-I NOZZLE - SMALL CONICAL D 9/16" (14.2mm) NI PLATED BRASS 2.820" (71.6mm) INSTALLED75145603-I NOZZLE - SHORT TAPERED G 9/16" (14.2mm) NI PLATED BRASS 2.375" (60.3mm) INSTALLED75146202-I NOZZLE - CONICAL A 5/8" (15.9mm) NI PLATED BRASS 3.125" (79.4mm) INSTALLED75146201-I NOZZLE - BOTTLE NOSE E 5/8" (15.9mm) NI PLATED BRASS 3.125" (79.4mm) INSTALLED 75146205-I NOZZLE - CONICAL A 5/8" (15.9mm) NI PLATED BRASS 3.031" (77.0mm) INSTALLED 75146206-I NOZZLE - SHORT CONICAL G 5/8" (15.9mm) NI PLATED BRASS 1.875" (47.6mm) INSTALLED 75146207-I NOZZLE - SHORT CONICAL G 5/8" (15.9mm) NI PLATED BRASS 2.187" (55.6mm) INSTALLED75146209-I NOZZLE - BOTTLE NOSE E 5/8" (15.9mm) NI PLATED BRASS 2.820" (71.6mm) INSTALLED75146204-I NOZZLE - CONICAL A 5/8" (15.9mm) NI PLATED BRASS 2.820" (71.6mm) INSTALLEDCOPPER75145002C NOZZLE - TAPERED B 1/2" (12.7mm) NI PLATED COPPER 3.125" (79.4mm) 7500173875145002CU NOZZLE - TAPERED B 1/2" (12.7mm) BARE COPPER 3.125" (79.4mm) 7500173875146202C NOZZLE - CONICAL A 5/8" (15.9mm) NI PLATED COPPER 3.125" (79.4mm) 7500173875146202CU NOZZLE - CONICAL A 5/8" (15.9mm) BARE COPPER 3.125" (79.4mm) 7500173875146204CU NOZZLE - CONICAL A 5/8" (15.9mm) BARE COPPER 2.820" (71.6mm) 75001738 75146205CU NOZZLE - TAPERED B 5/8" (15.9mm) BARE COPPER 3.031" (77.0mm) 75001738 75147501CU NOZZLE - CYLINDRICAL F 3/4" (19.0mm) BARE COPPER 3.125" (79.4mm) 75001738 COPPER WITH INSULATOR75146202C-I NOZZLE - CONICAL A 5/8" (15.9mm) NI PLATED COPPER 3.125" (79.4mm) INSTALLED75146202CU-I NOZZLE - CONICAL A 5/8" (15.9mm) BARE COPPER 3.125" (79.4mm) INSTALLED 75146204CU-I NOZZLE - CONICAL A 5/8" (15.9mm) BARE COPPER 2.820" (71.6mm) INSTALLED75146208CU-I NOZZLE - SHORT CONICAL G 5/8" (15.9mm) BARECOPPER 1.350" (34.3mm) INSTALLED

HOW TO SELECT NOZZLE FOR DESIRED TIP PLACEMENT

To determine the desire �p placement dimension (Recessed, Flush, Extended) you will need to take the nozzle seat adder for the nozzle series plus, the diffuser length plus, the contact �p length (Dimension “B”) plus the desired recess or s�ckout (nega�ve) dimension. Select the nozzle with the closest measured dimension. Keep in mind there are op�ons for different length diffusers to help achive the desired �p placement.

300 SERIES Nozzle Adder = .6150“400 SERIES Nozzle Adder = .6850”500 SERIES Nozzle Adder = .7300”

EXAMPLE: - 400 SERIES CONSUMABLES

Add .6850” (Nozzle Series Adder-SEE ABOVE) + Diffuser Length(75004033) =1.438“ + Tip Length(750XX014 ”B” Dimension)=.908”.Dimensional Stack up = 3.03“

If you select the 75146202-I with an Overall Length of 3.125” the �p recess will be approxametly .095” (3/32”).

A EDCB HGF

HOW TO ORDER

AMERICAN WELDQUIP’S CONSUMABLESNOZZLES

PART # DESCRIPTION TYPE BORE SIZE MATERIAL O.A.L. INSULATOR500 SERIES - For Use With Torch Model #'s 507NI PLATED BRASS75157501 NOZZLE - CONICAL A 3/4" (19.0mm) NI PLATED BRASS 3.187" (81.0mm) 75001740 75156201 NOZZLE - TAPERED B 9/16" (14.2mm) NI PLATED BRASS 2.670" (67.8mm) 75001740 NI PLATED BRASS WITH INSULATOR 75156201-I NOZZLE - TAPERED B 9/16" (14.2mm) NI PLATED BRASS 2.670" (67.8mm) INSTALLED 75157501-I NOZZLE - CONICAL A 3/4" (19.0mm) NI PLATED BRASS 3.187" (81.0mm) INSTALLED COPPER WITH INSULATOR75157001CU-I NOZZLE - CONICAL A 11/16" (17.46mm) BARE COPPER 3.187" (81.0mm) INSTALLED

WATER-COOLED NOZZLES 75166201 CONICAL, TRD ON, HOSE BARBS A 5/8" (15.9mm) BARE COPPER 3.125" (79.4mm) 75001738 75166203 CONICAL, SWIVEL, QUICK DISC. A 5/8" (15.9mm) BARE COPPER 3.125" (79.4mm) 75001738 75166202M CONICAL, TRD ON, QD(12" TUBES) A 5/8" (15.9mm) BARE COPPER 3.125" (79.4mm) 75001738 75166204M CONICAL, SWIVEL, HOSE BARBS A 5/8" (15.9mm) BARE COPPER 3.125" (79.4mm) 75001738 75167501 ONICAL, SWIVEL, COMPRESSION A 3/4" (19.0mm) BARE COPPER 3.125" (79.4mm) 75001740 75167502M CONICAL, SWIVEL, HOSE BARBS A 3/4" (19.0mm) BARE COPPER 3.125" (79.4mm) 75001740

HOW TO ORDER

NOZZLE INSULATORSPACKAGE QUANTITY(Order In Mul�ples) OF 5 - ORDER PER PIECESEE NOZZLE SELECTION PAGE 40 AND 41 FOR PROPER NOZZLE INSULATOR PART NUMBER

PART # DESCRIPTION DIMENSIONS 75001733 NOZZLE INSULATOR (SHORT) - .7850"(20mm) x .750"(19mm)75001735 NOZZLE INSULATOR (SHORT) - 1.375"(35mm) x .750"(19mm)75001738 NOZZLE INSULATOR - 1.50"(38mm) x .750"(19mm)75001740 NOZZLE INSULATOR - 1.50"(38mm) x .850"(21.5mm)

PACKAGE QUANTITY(Order In Mul�ples) OF 5 - ORDER PER PIECE

PART # DESCRIPTION TORCH SERIES 75001003 INSULATING WASHER - GREEN TRACER 238, 307, 300, AST 300 Series 75001004 INSULATING WASHER - RED TRACER 354, 400, 407, 450, 454, 500,

550, 600, 607, AST-500 Series 75001005 INSULATING WASHER - BLUE TRACER 347, 447 75001006 INSULATING WASHER - BLACK TRACER 507, 555

INSULATING WASHERS

(FOR USE WITH TORCHES SET UP WITH (RS) REPLACEABLE NOZZLE SEAT OPTION)

PART # DESCRIPTION 75077347 REPLACEABLE NOZZLE SEAT - CONVERTS 300 SERIES TO 400 SERIES NOZZLES75077357 REPLACEABLE NOZZLE SEAT - FOR USE WITH 500 SERIES NOZZLES75077800 REPLACEABLE NOZZLE SEAT - FOR USE WITH 300 SERIES NOZZLES75077850 REPLACEABLE NOZZLE SEAT - FOR USE WITH 400/600 SERIES NOZZLES75077500 OTC/MILLER NOZZLE SEAT - MICARTA75077500EL OTC/MILLER NOZZLE SEAT - MICARTA

REPLACEABLE NOZZLE SEATS