General Vendor Information - dot.state.mn.us

Legal Company Name: Central Trailer Sales, Inc

DELIVERY TIME FRAME:What is the delivery time frame in calendar days after receipt of order (A.R.O)?

30-90 days ARO

PROMPT PAYMENT TERMS:What prompt pay discounts will you offer?

General Vendor Information

PLACING ORDERS: Enter the name, phone number, fax number, and e-mail address of your contact person for placing orders.

N/A

Brian Renstrom, PH: (763)434-2277, FAX: (763)434-2280, [email protected]

COMPANY NAME SWIFT ID LOC CODE OMPANY ADDRES ST /ZIP PHONE CONTACT NAMECentral Trailer Sale VN0000259596_2 18661 Hwy 65, Eas MN 55011 763-434-2277 Brian Renstrom

SWIFT EVENT TITLE : Chippers, Brush, PTO and Engine Driven

1. Following is a list of all distributors that are authorized to sell the equipment listed above. 2. The Swift Vendor Number (SWIFT ID) must be complete, including the vendor Swift ID and Location Code (LOC CODE).3. All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditions before any State Contract

may be executed.

STATE OF MINNESOTAPRICING PAGE FIXED PRICE

TRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG, SLIDE AXLE, UTILITY, GOOSENECK, ENCLOSED, ETC.

Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:

Spec # Information Requested Answer

2.0MAKE AND MODEL (See models in "Central Trailer Sales_PJ

Price List_2020")

GVWR

Payload Capacity

Deck Length

Deck Width

Loading Deck Height

Construction

Decking Material

Headboards

Tie Downs

SUSPENSION

Type

Axles

Axle Make

Tires

Wheels

BRAKES

ELECTRICAL WIRING SYSTEM

TONGUE

Style

RESPONDERS MUST USE THIS PRICE PAGE OR RESPONSE MAY BE REJECTED

[email protected]

East Bethel, MN 55011763-434-2277

763-434-2280

Central Trailer Sales, INCBrian Renstrom18661 Hwy 65

mailto:[email protected]



Main Frame Material

Length

Hitch Type

Safety Chains

Tongue Stand

Loading Ramps

Paint

Warranty (Months/Years) 1 year

BASE UNIT PRICE: $

2.0 LIST AVAILABLE OPTIONS

2.1 Mn/DOT Wiring and Lighting- Price per specs.

$150 (When not included in standard features)

2.2 Long Stroke brake chambers N/A

2.3

2.4

2.5

2.6

3.0 Discount off List Price for related parts and 0 % Discountaccessories

4.0 Shop Rates Per Hour4.1 Rate For Initial Inspection4.2 Rate for Mechanical Work $90.00

5.0 Hot Dipped Galvanizing5.15.1 Model N/A5.2 Model

Model

6.0 DELIVERY STARTING POINT: CITY/STATE East Bethel, MN 55011

List the trailer models and price to Galvanize each Add lines as needed



See Special Terms and Conditions No Flat Rate Allowed Starting City and State

PRICE PER MILE FROM STARTING POINT: $2.50

Central Trailer Sales, Inc

Page 1 of 94 Printed 01/23/2020

(763) 434-2277 Table of Contents

Product Description Page Product Description Page

LS Low-Pro Flatdeck with Singles 2 H5 10" Pro-Beam Equipment 52

LD Low-Pro Flatdeck with Duals 4 H6 8" Pro-Beam Super-Wide Equip 54

L3 14" I-Beam Low-Pro with Duals 6 H7 10" Pro-Beam Super-Wide Equip 56

LY Low-Pro with Hydraulic Dove 8 P8 Angle Pipetop Trailer 58

L6 Med. Duty Deckover 6" Channel 10 B5 5" Channel Buggy Hauler 60

F8 8" I-Beam Deckover 12 B6 6" Channel Super-Wide 62

PL Low-Pro Pintle with Duals 14 B8 8" Channel Super-Wide 64

TH 83" Hydraulic Quick Tilt 16 D5 60" Utility Dump 66

T1 Single Axle HD Tilt 18 D3 72" Tandem Axle Dump 68

T5 5" Channel Tilt Carhauler 20 DL 83" Low Pro Dump 70

T6 6" Channel Equipment Tilt 22 DT 83” Low Pro Telescopic Dump 72

TJ HD Equipment Tilt 6" Channel 24 DM 83" Low Pro High Side Dump 74

TF Powered Full Tilt 26 DE HD Low-Pro Dump 76

TS 6" Channel Super-Wide Tilt 28 D8 96" Deckover Dump 78

T7 8" Channel Tilt 30 DD Tandem Dual Dump 80

TK HD Equipment Tilt 8" Channel 32 U6 60" Sngl Axle Channel Utility 82

T8 Deckover Tilt 34 UC 60" Tndm Axle Channel Utility 84

T9 HD Deckover Tilt 36 UK 77" Tndm Axle Channel Utility 86

TD Tandem Dual Tilt 38 U7 77" Sngl Axle Channel Utility 88

C4 4" Channel Carhauler 40 U8 83" Sngl Axle Channel Utility 90

C5 5" Channel Carhauler 42 UL 83" Tndm Axle Channel Utility 92

CE 5" Channel Equipment 44

CC 6" Channel Equipment 46

C8 8" Channel Equipment 48 H4 8" Pro-Beam Equipment 50



(763) 434-2277 Low-Pro Flatdeck with Singles (LS)

Standard Features

Coupler Options: R* GN 2 5/16" Round (25,000 lb.) w/ Toolbox Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) w/Tbx $0.00 P 3" Pintle Eye - Face-mount (36,000 lb.) w/Tbx $0.00

Powder Coat Color Options: Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00 Primer + Black (Texas) (0) $148.00

S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $0.00

* The trailer G.V.W.R. cannot exceed the coupler rating.

Primer + Red (Texas) (1) Red (r) Desert Tan (t) Primer + Desert Tan (Texas) (8) Primer + White (Texas) (3) White (w) Primer + Tractor Orange (Texas) (5)

$319.00

Tractor Orange (n) $383.00

L S R 2 0 7 2 B S S K LSR2072BSSK 20' Low-Pro Flatdeck with Singles $6,105.00

LSR2272BSSK 22' Low-Pro Flatdeck with Singles $6,274.00 LSR2472BSSK 24' Low-Pro Flatdeck with Singles $6,445.00 LSR2572BSSK 25' Low-Pro Flatdeck with Singles $6,529.00 LSR2672BSSK 26' Low-Pro Flatdeck with Singles $6,612.00 LSR2872BSSK 28' Low-Pro Flatdeck with Singles $6,783.00 LSR2972BSSK 29' Low-Pro Flatdeck with Singles $6,869.00 LSR3072BSSK 30' Low-Pro Flatdeck with Singles $7,018.00 LSR3272BSSK 32' Low-Pro Flatdeck with Singles $7,189.00 LSR3472BSSK 34' Low-Pro Flatdeck with Singles $7,356.00 LSR3572BSSK 35' Low-Pro Flatdeck with Singles $7,441.00 LSR3672BSSK 36' Low-Pro Flatdeck with Singles $7,527.00 LSR3872BSSK 38' Low-Pro Flatdeck with Singles $7,694.00 LSR4072BSSK 40' Low-Pro Flatdeck with Singles $7,865.00

• 15,680 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • GN 2 5/16" Ball Bulldog Coupler 25,000 lb • Safety Chains • 2 - Drop Leg Jacks (10,000 lb.) • 2 - Dexter E-Z Lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Monster Steps on Both Sides • Lockable Front Toolbox w/ Chain Holder

• 8' Ramps w/ Holders • 12" x 14 lb. I-Beam Main Frame, Riser & Neck • Frame Bridge Standard on 30' and up. • 3" Channel Crossmembers 16" on Center • 2 x 6 x 1/8" Square Tubing Outer Deck Frame • 2" Treated Pine Lumber Deck • 102" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • Amber Side Turn Flashers • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • 5 year Dexter Axle Warranty • Spare Tire & Mount

30' and up, upgrade to triple axle recommended. 30' and up, upgrade to 19 lb. I-Beam recommended. *** MAX GVWR 24,000 with Triple 8k Axle Option. ***

Gooseneck Length (8' 10")

Grey (g) Primer + Grey (Texas) (6) $417.00

$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


(3) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Spring² (3) 7,000# w/14 Ply LR-G Tires (Dexter)Electric / Torsion²

9 A

Under Frame Tie Down Flat 19 lb. I-Beam Main Frame, Riser & Neck

$3.16 / ft $12.94 / ft

Low-Pro Flatdeck with Singles (LS) Options

Axle Options: Other Options:

72BS * (2) 7,000# (Dexter) Electric / Spring Included 4 Plate for Winch $155.25 72BT (2) 7,000# (Dexter) Electric / Torsion $308.00 6 6" Taller GN Riser $165.60

72HS (2) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring²

72HT (2) 7,000# (Dexter)

$1,632.00

Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $1,940.00

73BS (3) 7,000# (Dexter) Electric / Spring $1,063.00 73BT (3) 7,000# (Dexter) Electric / Torsion $1,523.00

B 22 lb. I-Beam Main Frame, Riser & Neck $19.84 / ft C 12"oc Crossmembers $205.85 E Rough Oak Floor $23.00 / ft H Receiver Hitch $81.65

(3) 7,000# (Dexter)


92BS (2) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Spring²

92BT (2) 7,000# w/14 Ply LR-G Tires (Dexter)

$315.00

T Torque Tube $12.94 / ft

Electric / Torsion² $622.00 X Bulldog 2-speed Jacks (12,000 lb.) $204.70

92HS (2) 7,000# w/14 Ply LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring²

92HT (2) 7,000# w/14 Ply LR-G Tires (Dexter)

$1,950.00

Z Ramp Support Arms $41.40 -BWP1 Add BlackWood Pro to Dovetail and Ramps $883.20

-BWP2 Add BlackWood Pro to Dovetail $600.30

Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $2,257.00 -BWPO Blackwood Pro Outer Deck $24.44 / ft -BWPF Blackwood Pro Full Deck $38.24 / ft

(2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Electric / Torsion² $2,602.00

(2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter)

-LT05 Add LED Reverse Lights $155.25 -LT10 Light Bar w/4 Lights $357.65

-RT01 1 Pair Weld-On Strap Ratchets $66.70 -S301 1 Side-mount Toolbox 45"x14" $412.85 -S501 1 Side-mount Toolbox 72"x14" $678.50

-SP01 Under Frame Spare Tire & Mnt.(Not Comp.w/17.5 T/W)

$349.60

Notes: ² Special Order Option: Requires additional confirmation lead-time.

K 4" Ratchets every 4ft w/ Slide Track $29.90 / ft

(3) 7,000# w/14 Ply LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² (3) 7,000# w/14 Ply LR-G Tires (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Torsion²

-DM01 1 Extra Pair Flushmount D-Rings on Steel Floor -DR01 1 Pair D-Rings -DS05 3/16" DP Steel Floor w/4 D-Rings & 12"oc

Add 7-Way RV Plug to Rear Bumper -JA06 2 Hydraulic Jacks™

$42.55 $42.55

$60.09 / ft

-RM30 No Ramps No Ramp Pockets -$143.75

-TB03 Top Riser Toolbox $415.15

(3) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring²

(2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Electric / Spring²

(2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring²

P R S

11ga (1/8") DP Steel Floor w/4 D-Rings & 12"oc Frame Bridging Diamond Plate Ramp Bottoms

$50.03 / ft

-SM02 2 Extra Side Marker Lights, 1 Per Side $72.45

73HT

82BT

82HT Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $4,183.00

83BS (3) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Electric / Spring² $3,734.00

83BT (3) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Electric / Torsion² $4,966.00

83HT (3) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $7,335.00

K2BS Tail O

(2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter) Electric / Spring²

ptions:

$2,543.00

S* Straight Deck w/ 8' Slide-in Ramps Incl. F 5' Dovetail w/ 2 Flip-over Ramps $488.00 T 5' Dovetail w/ 3 Flip-over Ramps $650.00 W 5' Dovetail w/ 2 Flip-over Monster Ramps $1,293.00 Z 5' Dovetail w/ Power Tail (Pat. Pend. TX Only) $3,135.00



(763) 434-2277 Low-Pro Flatdeck with Duals (LD)

L D R 2 0 A 2 B S S K LDR20A2BSSK 20' Low-Pro Flatdeck with Duals $9,029.00

LDR22A2BSSK 22' Low-Pro Flatdeck with Duals $9,229.00 LDR24A2BSSK 24' Low-Pro Flatdeck with Duals $9,430.00 LDR25A2BSSK 25' Low-Pro Flatdeck with Duals $9,534.00 LDR26A2BSSK 26' Low-Pro Flatdeck with Duals $9,642.00 LDR28A2BSSK 28' Low-Pro Flatdeck with Duals $9,857.00 LDR30A2BSSK 30' Low-Pro Flatdeck with Duals $10,071.00 LDR32A2BSSK 32' Low-Pro Flatdeck with Duals $10,285.00 LDR34A2BSSK 34' Low-Pro Flatdeck with Duals $10,500.00 LDR35A2BSSK 35' Low-Pro Flatdeck with Duals $10,605.00 LDR36A2BSSK 36' Low-Pro Flatdeck with Duals $10,712.00 LDR38A2BSSK 38' Low-Pro Flatdeck with Duals $10,928.00 LDR40A2BSSK 40' Low-Pro Flatdeck with Duals $11,140.00 LDR42A2BSSK 42' Low-Pro Flatdeck with Duals $11,355.00 LDR44A2BSSK 44' Low-Pro Flatdeck with Duals $11,568.00

Standard Features

Coupler Options: R* GN 2 5/16" Round (25,000 lb.) w/ Toolbox Incl. E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $379.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $237.00


Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $237.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $0.00



$319.00


• 25,000 lb. G.V.W.R. • 10,000 lb. x 2 G.A.W.R. • GN 2 5/16" Ball Bulldog Coupler 25,000 lb • Safety Chains • 2 - Drop Leg Jacks (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (10,000 lb.) • 5 Leaf Slipper Spring Suspension • 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern • 8 - 16" 235/80R16 Radial Tires (3,090 lb) • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Monster Steps on Both Sides • Lockable Front Toolbox w/ Chain Holder

• 8' Ramps w/ Holders • 12" x 19 lb. I-Beam Main Frame, Riser & Neck • Frame Bridge Standard on 30' and up • 3" Channel Crossmembers 16" on Center • 2 x 6 x 1/8" Square Tubing Outer Deck Frame • 2" Treated Pine Lumber Deck • 102" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • Amber Side Turn Flashers • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • 5 year Dexter Axle Warranty • Spare Tire & Mount

***Lift Axle Requires 38" Deck Height (FD)*** Torsion Axle option will raise Deck Height 2".

*** MAX GVWR 36,000 on Pintle Coupler with 15k or Triple 12k Axles. *** Bumper Pull Tongue Length (6' 11"), Gooseneck Length (8' 11").


$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


Low-Pro Flatdeck with Duals (LD) Options


S2BS

(2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter)

$1,078.00

Electric / Spring² S2BT


$2,470.00

Electric / Torsion² S2HS


$3,405.00

Elec/Hyd Disc (1,600 PSI Pump) / Spring² A2AS (2) 10,000# Axles (Dexter) Air / Springª $5,359.00 A2BS * (2) 10,000# Axles (Dexter) Electric / Spring Included

T2BS (2) 10,000# w/14 Ply LR-G Dual T&W(Dexter) Electric / Spring $518.00

T2HS (2) 10,000# w/14 Ply LR-G Dual T&W(Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $2,845.00

C2BS (2) 12,000# Axles (Dexter) Electric / Spring $1,717.00

C2HA (2) 12,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Air Ride² $7,665.00

C2HS (2) 12,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring $3,683.00


C3HS (3) 12,000# Axles (Dexter) $7,630.00 Elec/Hyd Disc (1,600 PSI Pump) / Spring D2BS (2) 12,000# w/14 Ply LR-G Dual T&W (Dexter)

Electric / Spring $2,236.00

D2HS (2) 12,000# w/14 Ply LR-G Dual T&W (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring $4,200.00

N2HA (2) 12,000# w/215/75R17.5" LR-H Dual T&W (Dext Elec/Hyd Disc (1,600 PSI Pump) / Air Ride²

er) $9,789.00

J2GS (2) 15,000# w/215/75R17.5" LR-H Dual T&W (Dext Elec/Hyd Drum (1,000 PSI Pump) / Spring

er) $6,662.00

* Trailers with combined G.A.W.R. of 30,000 lbs or more must add options B and C

ª Air brakes may affect placement of ramp holders

Tail Options: S* Straight Deck w/ 2 Slide-in Ramps Incl. E 5' Dovetail w/ 2 Flip-over Ramps w/HD Gusset $603.00


J 5' Dovetail w/ 3 Flip-over Ramps w/HD Gusset $827.00

W 5' Dovetail w/ 2 Flip-over Monster Ramps $1,293.00

F 5' Dovetail w/ 2 Flip-over Ramps $488.00

T 5' Dovetail w/ 3 Flip-over Ramps $650.00

Z 5' Dovetail w/ Power Tail (Pat. Pend. TX Only) $3,135.00

4 Plate for Winch $155.25 9 Under Frame Tie Down Flat $3.16 / ft B 22 lb. I-Beam Main Frame & Neck $19.84 / ft C 12"oc Crossmembers $205.85 E Rough Oak Floor $23.00 / ft H Receiver Hitch $81.65 K 4" Ratchets every 4ft w/ Slide Track $29.90 / ft M 6" Axle Spread (Longer Equalizer) $205.85 N 72" Axle Spread $287.50 P 11ga (1/8") DP Steel Floor w/4 D-Rings & 12"oc $50.03 / ft R Frame Bridging $221.95 S Diamond Plate Ramp Bottoms $155.25 T Torque Tube $12.94 / ft X Bulldog 2-speed Jacks (12,000 lb.) $204.70 Z Ramp Support Arms $41.40 -BWPO Blackwood Pro Outer Deck $24.44 / ft -BWP1 Add BlackWood Pro to Dovetail and Ramps $883.20 -BWP2 Add BlackWood Pro to Dovetail $600.30 -BWPF Blackwood Pro Full Deck $38.24 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55 -EL01 Add 7-Way RV Plug to Rear Bumper $112.70 -JA01 HD 25k Jost 2x Jacks $614.10 -JA06 2 Hydraulic Monster Jacks™ $2,045.85 -LT05 Add LED Reverse Lights $155.25 -RM30 No Ramps No Ramp Pockets -$143.75 -RT01 1 Pair Weld-On Strap Ratchets $66.70 -S301 1 Side-mount Toolbox 45"x14" $412.85 -S501 1 Side-mount Toolbox 72"x14" $678.50 -SM02 2 Extra Side Marker Lights, 1 Per Side $72.45



(763) 434-2277 14" I-Beam Low-Pro with Duals (L3)

Standard Features

Coupler Options: H* GN 2 5/16" Round (30,000 lb.) w/ Toolbox Incl. E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $143.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $0.00


* The trailer G.V.W.R. cannot exceed the coupler rating. Primer + Red (Texas) (1) Red (r) $319.00

Primer + Tractor Orange (Texas) (5)


L 3 H 2 0 C 2 B S S K L3H20C2BSSK 20' x 14" I-Beam Low-Pro with Duals $12,913.00

L3H22C2BSSK 22' x 14" I-Beam Low-Pro with Duals $13,179.00 L3H24C2BSSK 24' x 14" I-Beam Low-Pro with Duals $13,445.00 L3H26C2BSSK 26' x 14" I-Beam Low-Pro with Duals $13,710.00 L3H28C2BSSK 28' x 14" I-Beam Low-Pro with Duals $13,977.00 L3H30C2BSSK 30' x 14" I-Beam Low-Pro with Duals $14,242.00 L3H32C2BSSK 32' x 14" I-Beam Low-Pro with Duals $14,508.00 L3H34C2BSSK 34' x 14" I-Beam Low-Pro with Duals $14,773.00 L3H36C2BSSK 36' x 14" I-Beam Low-Pro with Duals $15,040.00 L3H38C2BSSK 38' x 14" I-Beam Low-Pro with Duals $15,305.00 L3H40C2BSSK 40' x 14" I-Beam Low-Pro with Duals $15,571.00 L3H42C2BSSK 42' x 14" I-Beam Low-Pro with Duals $15,837.00

• 30,000 lb. G.V.W.R. • 12,000 lb. x 2 G.A.W.R. • GN 2 5/16" Ball Bulldog Coupler 30,000 lb • Safety Chains • 2 - Drop Leg Jacks (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (12,000 lb.) • 5 Leaf Slipper Spring Suspension • 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern • 8 - 16" 235/80R16 Radial Tires (3,090 lb) • 3" Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Monster Steps on Both Sides • Lockable Front Toolbox w/ Chain Holder

• 8' Ramps w/ Holders • 14" x 5" x 22 lb. I-Beam Main Frame, Riser & Neck • Frame Bridge Standard on 30' and up • 3" Channel Crossmembers 16" on Center • 2 x 8 x 1/8" Square Tubing Outer Deck Frame • 2" Treated Pine Lumber Deck • 102" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • Amber Side Turn Flashers • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • 5 year Dexter Axle Warranty • Spare Tire & Mount

Torsion Axle option will raise Deck Height 2". GVWR over 26,000 lbs subject to US Federal Excise Tax.

Gooseneck Length (8' 11").

Desert Tan (t) Primer + Desert Tan (Texas) (8) Primer + White (Texas) (3) White (w)

$363.00


1 2 3 4 5 6 7 8 9 10 11 Other


14" I-Beam Low-Pro with Duals (L3) Options


Elec/Hyd Disc (1,600 PSI Pump) / Air Ride²

J2GS (2) 15,000# w/215/75R17.5” LR-H Dual T&W (Dexter) $4943.00 Elec/Hyd Drum (1,000 PSI Pump) / Spring

Tail Options:


(2) 12,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring (3) 12,000# Axles (Dexter) Electric / Spring

Bulldog 2-speed Jacks (12,000 lb.) Ramp Support Arms

-BWP1 Add BlackWood Pro to Dovetail and Ramps

$41.40

$24.44 / ft

M P

6" Axle Spread (Longer Equalizer) 11ga (1/8") DP Steel Floor w/4 D-Rings & 12"oc

$50.03 / ft

-BWPF Blackwood Pro Full Deck -BWPO Blackwood Pro Outer Deck

$38.24 / ft $24.44 / ft

A2BS (2) 10,000# Axles (Dexter) Electric / Spring ($1,524.00) 4 Plate for Winch $155.25 C2AA (2) 12,000# Axles (Dexter) Air / Air Rideª² $7,674.00 9 Under Frame Tie Down Flat $3.16 / ft C2AS (2) 12,000# Axles (Dexter) Air / Springª² $3,693.00 C 12"oc Crossmembers $205.85 C2BA (2) 12,000# Axles (Dexter) Electric / Air Ride² $3,980.00 E Rough Oak Floor $23.00 / ft C2BS * (2) 12,000# Axles (Dexter) Electric / Spring Included H Receiver Hitch $81.65

C2HA (2) 12,000# Axles (Dexter) $5,945.00 K 4" Ratchets every 4ft w/ Slide Track $29.90 / ft

S* Straight Deck w/ 2 Slide-in Ramps Incl. E 5' Dovetail w/ 2 Flip-over Ramps w/HD Gusset $603.00 F 5' Dovetail w/ 2 Flip-over Ramps $488.00 J 5' Dovetail w/ 3 Flip-over Ramps w/HD Gusset $827.00 T 5' Dovetail w/ 3 Flip-over Ramps $650.00 W 5' Dovetail w/ 2 Flip-over Monster Ramps $1,293.00 Z 5' Dovetail w/ Power Tail (Pat. Pend. TX Only) $3,135.00

-DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55 -EL01 Add 7-Way RV Plug to Rear Bumper $112.70 -JA01 HD 25k Jost 2x Jacks $614.10 -JA06 2 Hydraulic Monster Jacks™ $2,045.85 -RM30 No Ramps No Ramp Pockets -$143.75 -RT01 1 Pair Weld-On Strap Ratchets $66.70 -S301 1 Side-mount Toolbox 45"x14" $412.85 -S501 1 Side-mount Toolbox 72"x14" $678.50 -SM02 2 Extra Side Marker Lights, 1 Per Side $72.45

R Frame Bridging $221.95 S Diamond Plate Ramp Bottoms $155.25 T Torque Tube $12.94 / ft

C3HS (3) 12,000# Axles (Dexter) $5,911.00

Elec/Hyd Disc (1,600 PSI Pump) / Spring

D2BS (2) 12,000# w/14 Ply LR-G Dual T&W (Dexter)

Electric / Spring $516.00

D2HS (2) 12,000# w/14 Ply LR-G Dual T&W (Dexter) $2,481.00


N2HA (2) 12,000# w/215/75R17.

Elec/Hyd Disc (1,600 PSI

5" LR-H Dual T&W (Dexter)

Pump) / Air Ride² $8,070.00



(763) 434-2277 Low-Pro with Hydraulic Dove (LY)

L Y R 3 0 A 2 B S S K LYR30A2BSSK 30' Low-Pro with Hydraulic Dove $14,646.00

LYR32A2BSSK 32' Low-Pro with Hydraulic Dove $14,833.00 LYR34A2BSSK 34' Low-Pro with Hydraulic Dove $15,020.00 LYR36A2BSSK 36' Low-Pro with Hydraulic Dove $15,207.00 LYR38A2BSSK 38' Low-Pro with Hydraulic Dove $15,394.00 LYR40A2BSSK 40' Low-Pro with Hydraulic Dove $15,581.00 LYR42A2BSSK 42' Low-Pro with Hydraulic Dove $15,768.00 LYR44A2BSSK 44' Low-Pro with Hydraulic Dove $15,955.00

Standard Features

Coupler Options: R* GN 2 5/16" Round (25,000 lb.) w/ Toolbox Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) w/Tbx $0.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $237.00


P 3" Pintle Eye - Face-mount (36,000 lb.) w/Tbx $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $237.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $0.00



$319.00


• 25,000 lb. G.V.W.R. • 10,000 lb. x 2 G.A.W.R. • GN 2 5/16" Ball Bulldog Coupler 25,000 lb • Safety Chains • 2 - Drop Leg Jacks (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (10,000 lb.) • 5 Leaf Slipper Spring Suspension • 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern • 8 - 16" 235/80R16 Radial Tires (3,090 lb) • Interstate (TM) Deep Cycle Battery • 110V Integrated Trickle Charger • Self Contained Hydraulic Unit • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Monster Steps on Both Sides

• Lockable Front Toolbox w/ Chain Holder • 10' Hydraulic Dovetail • 12" x 19 lb. I-Beam Main Frame, Riser & Neck • Frame Bridge Standard on 30' and up. • 2 x 6 x 1/8" Square Tubing Outer Deck Frame • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 102" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • Amber Side Turn Flashers • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • 5" x 7½ " Hyd. Cylinder • 5 year Dexter Axle Warranty • Spare Tire & Mount

***Lift Axle Requires 38" Deck Height (FY)*** Air Suspension Option Trailer need to 36' or longer.

Dovetail Hauling Capacity 4,000 lbs from center of Dovetail Forward.Dovetail Lift Capacity of 10,000 lbs from center of Dovetail Forward.

*** MAX GVWR 36,000 on Pintle Coupler with 15k or Triple 12k Axles. *** *** Triple Axle Requires 38' and up. ***

Gooseneck Length (9').


$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


Low-Pro with Hydraulic Dove (LY) Options


4 Plate for Winch $155.25 5 Solar Battery Charger $140.30 6 6" Taller GN Riser $165.60 8 ¼" DP Steel Floor w/ 4 D-Rings & 12"oc $106.95 / ft 9 Under Frame Tie Down Flat $3.16 / ft B 22 lb. I-Beam Main Frame & Neck $19.84 / ft C 12"oc Crossmembers $205.85 E Rough Oak Floor $23.00 / ft K 4" Ratchets every 4ft w/ Slide Track $29.90 / ft M 6" Axle Spread (Longer Equalizer) $205.85 N 72" Axle Spread $287.50 P 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 12"oc $50.03 / ft

X Bulldog 2-speed Jacks (12,000 lb.) $204.70 -BWP3 Blackwood Pro Full Deck (Tail Only) $242.65

-BWPO Blackwood Pro Outer Deck $24.44 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55 -JA01 HD 25k Jost 2x Jacks $614.10 -JA06 2 Hydraulic Monster Jacks™ $2,045.85 -LT10 Light Bar w/4 Lights $357.65 -RT01 1 Pair Weld-On Strap Ratchets $66.70

(2) 12,000# w/14 Ply LR-G Dual T&W (Dexter) Electric / Spring $2,236.00

D2HA (2) 12,000# w/14 Ply LR-G Dual T&W (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Air Ride

D2HS (2) 12,000# w/14 Ply LR-G Dual T&W (Dexter)

$8,180.00

Notes:

Elec/Hyd Disc (1,600 PSI Pump) / Spring $4,200.00 ² Special Order Option: Requires additional confirmation lead-time.

(2) 15,000# w/215/75R17.5" LR-H Dual T&W (Dexter) Elec/Hyd Drum (1,000 PSI Pump) / Spring $6,662.00

* Trailers with combined G.A.W.R. of 30,000 lbs or more must add options B and C

Tail Options:

S* 10' Hydraulic Dovetail Incl. C 10' Hydraulic Self Cleaning Dovetail $595.00

1 3

Hutch susp. H9700-Underslung Tandem Axle Hutch susp. H9700-Underslung Triple Axle

Torque Tube $12.94 / ft

-BWP4 Blackwood Pro Outer Deck (Tail Only) -BWPF Blackwood Pro Full Deck

$38.24 / ft

1 Side-mount Toolbox 45"x14"

N2HA (2) 12,000# w/215/75R17.5” LR-H Dual T& W (Dexter) $9789.00 Elec/Hyd Drum (1600 PSI Pump) / Air Ride2

1 Side-mount Toolbox 72"x14" -SM02 2 Extra Side Marker Lights, 1 Per Side

$72.45

-TB03 Top Riser Toolbox -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck

D2BS

J2GS

S2BS


$644.00



$2,470.00



$3,405.00

Elec/Hyd Disc (1,600 PSI Pump) / Spring² A2BA (2) 10,000# Axles (Dexter) Electric / Air Ride² $4,101.00 A2BS * (2) 10,000# Axles (Dexter) Electric / Spring Included A2BT (2) 10,000# Axles (Dexter) Electric / Torsion² $1,393.00

A2HA (2) 10,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Air Ride $6,427.00

A2HS (2) 10,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $2,329.00

A3BS (3) 10,000# Axles (Dexter) Electric / Spring $2,107.00 A3BT (3) 10,000# Axles (Dexter) Electric / Torsion² $4,195.00



T2HS (2) 10,000# w/14 Ply LR-G Dual T&W(Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring $2,845.00

C2BA (2) 12,000# Axles (Dexter) Electric / Air Ride² $5,699.00 C2BS (2) 12,000# Axles (Dexter) Electric / Spring $1,717.00






$148.00


(763) 434-2277 Med. Duty Deckover 6" Channel (L6)

L 6 J 1 6 5 2 B S S K L6J1452BSSK 14' Med. Duty Deckover 6" Channel $4,509.00

L6J1652BSSK 16' Med. Duty Deckover 6" Channel $4,509.00 L6J1852BSSK 18' Med. Duty Deckover 6" Channel $4,587.00 L6J2052BSSK 20' Med. Duty Deckover 6" Channel $4,662.00 L6J2252BSSK 22' Med. Duty Deckover 6" Channel $4,740.00 L6J2452BSSK 24' Med. Duty Deckover 6" Channel $4,816.00

Standard Features

Coupler Options: J* BP 2 5/16" Adjustable (14,000 lb.) Incl. P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00


Powder Coat Color Options: Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00 Primer + Black (Texas) (0)

Primer + Red (Texas) (1)

Red (r) $319.00



• 9,990 lb. G.V.W.R. • 5,200 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Drop Leg Jack (7,000 lb.) • 2 - Dexter E- Z lube Brake Axles (5,200 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 15" White Spoke Wheels • 4 - 225/75R15 Radial Tires • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape

• Tool Tray In Tongue • 6' Slide in Ramps w/ Holders • 6" Channel Tongue • 6" Channel Frame Main Frame • 3x2" Angle Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 101" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • 5 year Dexter Axle Warranty

*** MAX GVWR 10,400 *** Bumper Pull Tongue Length (5' 7").


$363.00


1 2 3 4 5 6 7 8 9 10 11 Other


(2) 5,200# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Spring² 6

C Upgrade to 235/80 R16 on 52k Axles w /1" Spacer 12"oc Crossmembers

Med. Duty Deckover 6" Channel (L6) Options


52BS * (2) 5,200# (Dexter) Electric / Spring Included 2 Upgrade to 2-10k Jacks $427.80 52BT (2) 5,200# (Dexter) Electric / Torsion $414.00 3 10k Jack (Bumper Pull) $142.60

Tail Options: K 4" Ratchets every 4ft w/ Slide Track $29.90 / ft M Mount Only for Spare Tire $36.80 P 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings &

12"oc $50.03 / ft

T Spare Tire and Mount (Bumper Pull) $221.95

-BWPO Blackwood Pro Outer Deck $24.44 / ft

-DR01 1 Pair D-Rings $42.55

-RT01 1 Pair Weld-On Strap Ratchets $66.70


Q Front Toolbox (Bumper Pull) $205.85

-BWPF Blackwood Pro Full Deck $38.24 / ft

-DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55

-EL01 Add 7-Way RV Plug to Rear Bumper $112.70

-S101 1 Side-mount Toolbox 30"x14" $412.85

E Rough Oak Floor $23.00 / ft

S* Straight Deck w/24x 6 ft Slide-in Ramps Exp Metal Incl. A 3' Dovetail w/24x 6 ft Slide-in Ramps Exp Metal $246.00 B 3' Dovetail w/ 2, 16"x60" Foldup Ramps $246.00 C 3' Dovetail w/ 3, 16"x60" Foldup Ramps $413.00 D 3' Dovetail w/ 2, 31"x66"HD Foldup Ramps $628.00 J 3" Dovetail w/ 4' Heavy Duty Fold-up Gate $427.00 V 3' Dovetaill w/ Split Heavy Duty Gate $700.00



(763) 434-2277 8" I-Beam Deckover (F8)

F 8 J 1 6 7 2 B S S K F8J1672BSSK 16' x 8" I-Beam Deckover $4,948.00

F8J1872BSSK 18' x 8" I-Beam Deckover $5,116.00 F8J2072BSSK 20' x 8" I-Beam Deckover $5,285.00 F8J2272BSSK 22' x 8" I-Beam Deckover $5,454.00 F8J2472BSSK 24' x 8" I-Beam Deckover $5,625.00 F8J2672BSSK 26' x 8" I-Beam Deckover $5,794.00 F8J2872BSSK 28' x 8" I-Beam Deckover $6,243.00 F8J3072BSSK 30' x 8" I-Beam Deckover $6,442.00

Standard Features

Coupler Options: J* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $94.00 C Rigid Mount Pintle Eye- Face-mount $94.00


P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,104.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,104.00 T BP 2 5/16" Adj. Cplr w/HD 6 hole Chn Brkt (20k) $59.00



$319.00


• 14.,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Tool Tray In Tongue • 6' 6" Slide in Ramps w/ Holders

• 8" x 10 lb. I-Beam Tongue • 8" x 10 lb. I-Beam Main Frame • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 96" Wide Deck • 2 x 6 x 1/8" Square Tubing Outer Deck Frame • DOT Approved Flushmount Lifetime LED Lights • Amber Side Turn Flashers • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • GN Option Equipped with 2 Jacks • GN Equipped with Lockable Front Toolbox • GN Equipped with Chain Holder • 5 year Dexter Axle Warranty

All 5ft. dovetails or 8k axle options must include 102" wide option (R). *** MAX GVWR 24,000 with triple 8k axles and 24k+ rated coupler. ***

Bumper pull tongue length (6' 3"). *** Torque tube standard on 28' and up***

*** GN coupler options include Spare Tire & Mount***


$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


(2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Electric / Torsion² (2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring²

8" I-Beam Deckover (F8) Options


72BT (2) 7,000# (Dexter) Electric / Torsion $308.00 4 Plate for Winch $155.25

72HS (2) 7,000# (Dexter)

Elec/Hyd Disc (1,600 PSI Pump) / Spring²

72HT (2) 7,000# (Dexter)

$1,632.00

Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $1,940.00 73BS (3) 7,000# (Dexter) Electric / Spring $1,063.00 73BT (3) 7,000# (Dexter) Electric / Torsion $1,523.00

E Rough Oak Floor $23.00 / ft G 2nd Jack $213.90 H Receiver Hitch $81.65 K 4" Ratchets every 4ft w/ Slide Track $29.90 / ft

(3) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $3,970.00


92BT (2) 7,000# w/14 Ply LR-G Tires (Dexter)

$315.00


Electric / Torsion² $622.00 Z Ramp Support Arms w/. Dove $41.40



$1,950.00

-BWP1 Add BlackWood Pro to Dovetail and Ramps $883.20 -BWP2 Add BlackWood Pro to Dovetail $600.30 -BWPO Blackwood Pro Outer Deck $24.44 / ft

Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $2,257.00 -BWPF Blackwood Pro Full Deck $38.24 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55

93HS (3) 7,000# w/14 Ply LR-G Tires (Dexter)

Elec/Hyd Disc (1,600 PSI Pump) / Spring² $3,987.00 -FR01 Under Frame Fork Rack (96" Wide Only) $285.20

-JA06 2 Hydraulic Monster Jacks™ $2,045.85


(3) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Electric / Spring² $3,734.00

K2BS (2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter) Electric / Spring²

$2,543.00

Tail Options:

S* Straight Deck w/ 6'6" Slide-in Ramps Incl.

72BS * (2) 7,000# (Dexter) Electric / Spring 2 Monster Steps on Both Sides

M Mount Only for Spare Tire $36.80

-DR01 1 Pair D-Rings Add 7-Way RV Plug to Rear Bumper

$42.55

93HT

82BS

(3) 7,000# w/14 Ply LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Torsion² (2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter) Electric / Spring² (2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter)Electric / Spring²

-LT10

-S101

Light Bar w/4 Lights 1 Pair Weld-On Strap Ratchets1 Side-mount Toolbox 30"x14" Under Frame Spare Tire & Mnt.(Not Comp.w/17.5T/W)

$66.70

(2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Surge Hydraulic Drum [Surge Coupler] / Spring²

(3) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Electric / Torsion²

(2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Torsion²

(3) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring²

(3) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Spring² (3) 7,000# w/14 Ply LR-G Tires (Dexter)Electric / Torsion²

8 C

Full Size Toolbox (Bumper Pull) 12"oc Crossmembers

P

R

11ga (1/8") DP Steel Floor w/ 4 D-Rings & 12"oc Front Toolbox (Bumper Pull)102" Deck Width

$50.03 / ft

73HT

83BS


A 3' Dovetail w/ 5' Slide-in Ramps (18' and up) $131.00 B 3' Dovetail w/ 2, 16"x60" Foldup Ramps $131.00 D 3' Dovetail w/ 2, 31"x66"HD Foldup Ramps $628.00 F 5' Dove with 2 Flipover Ramps (w/R opt.& 20' & up) $576.00 P 4' Dove with 2 Flipover Ramps (20' and up) $470.00 R 4' Dove with 3 Flipover Ramps (20' and up) $637.00 Y 4' Dove with 4ft. Monster Ramps (20' and up) $1,248.00


• 25,000 lb. G.V.W.R. • 10,000 lb. x 2 G.A.W.R. • 3" Pintle Eye Face Mount Coupler • Safety Chains • 2 - Drop Leg Jacks (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (10,000 lb.) • 5 Leaf Slipper Spring Suspension • 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern • 8 - 16" 235/80R16 Radial Tires (3,090 lb) • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Side Steps on Both Sides

• Lockable Front Toolbox • 8' Ramps w/ Holders • 12" x 19 lb. I-Beam Main Frame • Frame Bridge Standard on 30' and up • 3" Channel Crossmembers 16" on Center • 2 x 6 x 1/8" Square Tubing Outer Deck Frame • 2" Treated Pine Lumber Deck • 102" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • Amber Side Turn Flashers • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • Spare Tire & Mount

***Lift Axle Requires 38" Deck Height (PD)*** Torsion Axle option will raise Deck Height 2".

*** MAX GVWR 36,000 on Pintle Coupler with 15k or Triple 12k Axles. *** Bumper Pull Tongue Length (6' 11").

$148.00


(763) 434-2277 Low-Pro Pintle with Duals (PL)

P L P 2 0 A 2 B S S K PLP20A2BSSK 20' Low-Pro Pintle with Duals $8,762.00

PLP22A2BSSK 22' Low-Pro Pintle with Duals $8,963.00












Standard Features


Coupler Options: P* 3" Pintle Eye - Face-mount (36,000 lb.) Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) $0.00


Powder Coat Color Options: Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00 Primer + Black (Texas) (0) Primer + Red (Texas) (1)

Red (r) $319.00

Primer + Tractor Orange (Texas) (5) Tractor Orange (n)


$363.00


$383.00

1 2 3 4 5 6 7 8 9 10 11 Other


Low-Pro Pintle with Duals (PL) Options



S2BS


$644.00



$2,470.00



$3,405.00

Elec/Hyd Disc (1,600 PSI Pump) / Spring² A2BA (2) 10,000# Axles (Dexter) Electric / Air Ride² $4,101.00 A2BS * (2) 10,000# Axles (Dexter) Electric / Spring Included A2BT (2) 10,000# Axles (Dexter) Electric / Torsion $1,393.00

A2HA (2) 10,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Air Ride² $6,427.00


A3BS (3) 10,000# Axles (Dexter) Electric / Spring $2,107.00 A3BT (3) 10,000# Axles (Dexter) Electric / Torsion² $4,195.00



T2HS (2) 10,000# w/14 Ply LR-G Dual T&W(Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $2,845.00





4 Plate for Winch $155.25 9 Under Frame Tie Down Flat $3.16 / ft B 22 lb. I-Beam Main Frame $19.84 / ft C 12"oc Crossmembers $205.85 E Rough Oak Floor $23.00 / ft H Receiver Hitch $81.65 K 4" Ratchets every 4ft w/ Slide Track $29.90 / ft M 6" Axle Spread (Longer Equalizer) $205.85 N 72" Axle Spread $287.50 P 11ga (1/8") DP Steel Floor w/4 D-Rings & 12"oc $50.03 / ft R Frame Bridging $221.95 S Diamond Plate Ramp Bottoms $155.25 T Torque Tube $12.94 / ft X Bulldog 2-speed Jacks (12,000 lb.) $204.70 Z Ramp Support Arms $41.40 -BWPF Blackwood Pro Full Deck $38.24 / ft -BWPO Blackwood Pro Outer Deck $24.44 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55 -EL01 Add 7-Way RV Plug to Rear Bumper $112.70 -JA01 HD 25k Jost 2x Jacks $614.10 -JA06 2 Hydraulic Monster Jacks™ $2,045.85 -LT05 Add LED Reverse Lights $155.25 -RM30 No Ramps No Ramp Pockets -$143.75 -RT01 1 Pair Weld-On Strap Ratchets $66.70 -S301 1 Side-mount Toolbox 45"x14" $412.85 -S501 1 Side-mount Toolbox 72"x14" $678.50 -SM02 2 Extra Side Marker Lights, 1 Per Side $72.45

C3HS (3) 12,000# Axles (Dexter)


$7,630.00

D2BS (2) 12,000# w/14 Ply LR-G Dual T&W (Dexter) Electric / Spring $2,236.00

D2HS (2) 12,000# w/14 Ply LR-G Dual T&W (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring $4,200.00

N2HA (2) 12,000# w/215/75R17.5" LR-H Dual T&W (Dext Elec/Hyd Disc (1,600 PSI Pump) / Air Ride²

er) $9,789.00

J2GS (2) 15,000# w/215/75R17.5" LR-H Dual T&W (Dext er) $6,662.00 Elec/Hyd Drum (1,000 PSI Pump) / Spring

Tail Options: S* Straight Deck w/ 2 Slide-in Ramps Incl. E 5' Dovetail w/ 2 Flip-over Ramps w/HD Gusset $603.00 F 5' Dovetail w/ 2 Flip-over Ramps $488.00 J 5' Dovetail w/ 3 Flip-over Ramps w/HD Gusset $827.00 T 5' Dovetail w/ 3 Flip-over Ramps $650.00 W 5' Dovetail w/ 2 Flip-over Monster Ramps $1,293.00 Z 5' Dovetail w/ Power Tail (Pat. Pend. TX Only) $3,135.00



(763) 434-2277 83" Hydraulic Quick Tilt (TH)

T H J 1 6 5 2 E S T K THJ1652ESTK 16' x 83" Hydraulic Quick Tilt $4,929.00

THJ1852ESTK 18' x 83" Hydraulic Quick Tilt $4,974.00 THJ2052ESTK 20' x 83" Hydraulic Quick Tilt $5,020.00 THJ2252ESTK 22' x 83" Hydraulic Quick Tilt $5,065.00

Standard Features

Coupler Options: J* BP 2 5/16" Adjustable Incl. P 3" Pintle Eye - Channel-mount $0.00

Powder Coat Color Options: Black (k) * Incl. Desert Tan (t) Grey (g)

* The trailer G.V.W.R. cannot exceed the coupler rating. Red (r) Tractor Orange (n) White (w)

$68.00

• 10,000 lb. G.V.W.R. • 5,200 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Top Wind Drop-Leg Jack (8,000 lb.) • 2 Dexter E-Z lube Brake Axles (5,200 lb) • 4 Leaf Double-eye Spring Suspension • 4 - 15" White Spoke Wheels • 4 - 225/75R15 Radial Tires • Electric Breakaway Kit w/ Charger • 9" x 72" Treadplate Removable Steel Fenders

• 5" Channel Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 83" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • Hydraulic Power Up & Down • Integrated 12V Trickle Charger • Stake Pockets • 5 year Dexter Axle Warranty

16' Trailer must have Drop Axles. *** MAX GVWR 10,400 with 5,200 lb Axle Option. ***

***Trailer will have 80" Frame with Drop Axles. *** Bumper Pull Tongue Length (4' 3").

1 2 3 4 5 6 7 8 9 10 11 Other


83" Hydraulic Quick Tilt (TH) Options


52CS (2) 5,200# (Dexter) One Electric / Spring ($247.00) 4 Plate for Winch $155.25 52ES * (2) 5,200# (Dexter) Electric / Spring Included 8 2 Stake Pockets In Front of Trailer $13.80

Q Rubrail $5.46 / ft Tail Options: S 11ga(1/8") DP Steel Floor w/4 Flushmount D-Rings & $31.62 / ft T* Tilt Deck Incl.

16"oc

T Mount Only for Spare Tire $36.80 V Spare Tire and Mount $140.30 -BWPF Blackwood Pro Full Deck $32.78 / ft -BWPO Blackwood Pro Outer Deck $20.99 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55


$148.00


(763) 434-2277 Single Axle HD Tilt (T1)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features

Coupler Options: J* BP 2 5/16" Adjustable Incl. P 3" Pintle Eye - Channel-mount (14,000 lb.) $0.00


Powder Coat Color Options: Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00 Primer + Black (Texas) (0) Primer + Red (Texas) (1)

Red (r) $319.00



• 7,000 lb. G.V.W.R. • 7,000 lb. x 1 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Drop Leg Jack (8,000 lb.) • 1 - Dexter E- Z lube Brake Drop Axle (7,000 lb) • 2 - 16" White Spoke Wheels • 2 - 235/80R16 Radial Tires (3,520 lb) • Stake Pockets • Electric Breakaway Kit w/ Charger • Removable Tread-plate Steel Fenders • Expanded Metal Tool Tray In Tongue • 11 Degree Tilt Angle • Hydraulic Cushion Cylinder w/ Reservoir

• 5" Channel Tongue • 5” x 2” Steel Tube Frame • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 81" x 13’ Tilting Deck • 81" Between Fenders • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • Knife Edge Tail • 4 Recessed D-rings & 1 Center D-ring • Bull Nose Bumper • Mitered Front Corners • 5 year Dexter Axle Warranty

Bumper Pull Tongue Length (5').


$363.00


T 1 J 1 3 7 1 B D T K T1J1371BDTK 13' Single Axle HD Tilt $3,984.00

T1J1671BDTK 16' Single Axle HD Tilt $4,256.00


Single Axle HD Tilt (T1) Options


71SD (1) 7,000# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Drop Axle

$559.00

91SD (1) 7,000# w/14 Ply LR-G Tires (Dexter) Surge Hydraulic Drum [Surge Coupler] / Drop Axle

$717.00

71BD * (1) 7,000# (Dexter) Electric / Drop Axle Included

91BD (1) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Drop Axle

Tail Options: Tilt Deck

3 Upgrade to Single 10k Jack (Bumper Pull) $142.60 4 Plate for Winch $155.25 B Solar Battery Charger $140.30 C 12"oc Crossmembers $205.85 E Rough Oak Floor $20.13 / ft M Mount Only for Spare Tire $36.80 P 11ga(1/8")DP Steel Floor w/ 4 Flushmount D-Rings &

16"oc $48.30 / ft

Q Front Toolbox (Bumper Pull & Pintle) $205.85 T Spare Tire and Mount (Bumper Pull) $213.90 Z Roller on Front of Deck for Winch Cable $165.60 -BWPF Blackwood Pro Full Deck $32.78 / ft -BWPO Blackwood Pro Outer Deck $20.99 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55 -DR07 7 Pair D-Rings $302.45 -FE05 Weld on Fenders $72.45 -RT01 1 Pair Weld-On Strap Ratchets $66.70 -TB04 Full Size Divided Toolbox Upgrade (BP Only) $292.10 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $95.45 -WN95 Smittybilt Winch 9.5k w/ Plate, Btry, & Frt Tbx $1,104.00 -WP03 Winch Plate w/ Welded Receiver Hitch $238.05



(763) 434-2277 5" Channel Tilt Carhauler (T5)

T 5 J 1 6 5 2 E S T K T5J1652ESTK 16' x 5" Channel Tilt Carhauler $5,129.00

T5J1852ESTK 18' x 5" Channel Tilt Carhauler $5,169.00 T5J2052ESTK 20' x 5" Channel Tilt Carhauler $5,208.00 T5J2252ESTK 22' x 5" Channel Tilt Carhauler $5,248.00

Standard Features

Coupler Options: J* BP 2 5/16" Adjustable Incl. P 3" Pintle Eye - Channel-mount


Powder Coat Color Options: Black (k) * Incl.

Primer + Red (Texas) (1) $319.00 Desert Tan (t) Primer + Desert Tan (Texas) (8) $363.00

Primer + Grey (Texas) (6) $417.00

• 10,000 lb. G.V.W.R. • 5,200 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Top Wind Drop-Leg Jack (8,000 lb.) • 2 Dexter E-Z lube Brake Axles (5,200 lb) • 4 Leaf Double-eye Spring Suspension • 4 - 15" White Spoke Wheels • 4 - 225/75R15 Radial Tires • Stake Pockets & Rubrail • Electric Breakaway Kit w/ Charger

• 9" x 72" Treadplate Removable Steel Fenders • 11 Degree Tilt Pitch • 5" Channel Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 83" Wide Deck • 75" Wide Tiltable Deck • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • DOT Approved Flushmount Lifetime LED Lights • 5 year Dexter Axle Warranty

Bumper Pull Tongue Length (5' 6"). *** GN coupler options include Spare Tire & Mount***

Primer + Tractor Orange (Texas) (5) Tractor Orange (n) $383.00

1 2 3 4 5 6 7 8 9 10 11 Other

$0.00 No Paint No Primer (Texas) (z) $0.00

Grey (g) Red (r)

$68.00

White (w) Primer + Black (Texas) (0) $148.00


5" Channel Tilt Carhauler (T5) Options


Tail Options:

S 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings &

16"oc $28.46 / ft

T* Tilt Deck Incl. T Mount Only for Spare Tire $36.80

V Spare Tire and Mount $140.30

Z Roller on Front of Deck for Winch Cable $165.60 -BWPF Blackwood Pro Full Deck $32.78 / ft

-BWPO Blackwood Pro Outer Deck $20.99 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55

-DR01 1 Pair D-Rings $42.55 -TB01 Front Toolbox $204.70


52CS (2) 5,200# (Dexter) One Electric / Spring ($170.00) 3 10k Jack (Bumper Pull) $142.60 52ES * (2) 5,200# (Dexter) Electric / Spring Included 4 Plate for Winch $155.25

52SS (2) 5,200# (Dexter) $875.00

Surge Hydraulic Drum [Surge Coupler] / Spring²

5 Upgrade to 235/80 R16 on 52k Axles $132.25 F Steel Diamond Plate Fenders $0.00



(763) 434-2277 6" Channel Equipment Tilt (T6)

T 6 J 1 6 7 2 B T T K T6J1672BTTK 16' x 6" Channel Equipment Tilt $5,682.00

T6J1872BTTK 18' x 6" Channel Equipment Tilt $5,831.00 T6J2072BTTK 20' x 6" Channel Equipment Tilt $5,979.00 T6J2272BTTK 22' x 6" Channel Equipment Tilt $6,127.00 T6J2472BTTK 24' x 6" Channel Equipment Tilt $6,276.00

Standard Features

Coupler Options: J* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $94.00 P 3" Pintle Eye - Channel-mount $0.00


R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,104.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,104.00 T BP 2 5/16" Adj. Cplr w/HD 6 hole Chn Brkt (20k) $59.00



$319.00


• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • Torsion Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Stake Pockets & Rubrail • Electric Breakaway Kit w/ Charger • 9" x 72" Treadplate Removable Steel Fenders • Tool Tray In Tongue

• 11 Degree Tilt Pitch • 3" x 16" Cylinder • 6" Channel Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 74" Wide Tiltable Deck • 82" Between Fenders • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 10 year Dexter Torflex Axle Warranty

*** 8" I-beam on Goosenecks. *** Triple Axle Available on 22' and Longer

*** MAX GVWR 15,680 with Tandem 7k Axle Option and Gooseneck Option . *** *** Tilting Deck Length is 17' 2" ***

Bumper Pull Tongue Length (5' 1"), Gooseneck Length (8' 7"). *** GN coupler options include Spare Tire & Mount***


$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


6" Channel Equipment Tilt (T6) Options



Axle Options: Other Options: 72BT * (2) 7,000# (Dexter) Electric / Torsion Included 4 Plate for Winch $155.25

72ST (2) 7,000# (Dexter)

Surge Hydraulic Drum [Surge Coupler] / Torsion² $1,119.00 6 6" Taller GN Riser $165.60 9 9,990 G.V.W.R. $0.00 B Solar Battery Charger $140.30 73BT (3) 7,000# (Dexter) Electric / Torsion² $1,217.00

92BT (2) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Torsion $316.00 C 12"oc Crossmembers $205.85

93BT (3) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Torsion² $1,689.00

G 2nd Jack (Bumper Pull) $213.90

Tail Options: H

K Power up Power down Tilt Power Up/Down & Gravity Down

$742.90 $944.15

T* 16' Tilt Deck Incl. M Mount Only for Spare Tire $36.80

P 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings & 12"oc

$50.03 / ft

Q Front Toolbox (Bumper Pull & Pintle) $205.85 T Spare Tire and Mount (Bumper Pull) $213.90 X Bulldog 2-speed Jacks (12,000 lb.) $204.70 Z Roller on Front of Deck for Winch Cable $165.60 -BWPF Blackwood Pro Full Deck $32.78 / ft -BWPO Blackwood Pro Outer Deck $20.99 / ft -CH05 GN Lockable Chain Holder $154.10 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55 -FR01 Fork Rack (18' and Longer) $285.20 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,797.45 -JA06 2 Hydraulic Monster Jacks™ $2,045.85 -LT10 Light Bar w/4 Lights $357.65 -RT01 1 Pair Weld-On Strap Ratchets $66.70 -TB03 Top Riser Toolbox $500.25 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $95.45



(763) 434-2277 HD Equipment Tilt 6" Channel (TJ)

T J T 1 6 8 2 B T T K TJT1682BTTK 16' HD Equipment Tilt 6" Channel $8,370.00

TJT1882BTTK 18' HD Equipment Tilt 6" Channel $8,528.00 TJT2082BTTK 20' HD Equipment Tilt 6" Channel $8,686.00 TJT2282BTTK 22' HD Equipment Tilt 6" Channel $8,844.00 TJT2482BTTK 24' HD Equipment Tilt 6" Channel $9,001.00

Standard Features

Coupler Options: T* BP 2 5/16" Adj. Cplr w/HD 6 hole Chn Brkt (20k) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $37.00 C Rigid Mount Pintle Eye- Face-mount (25,000) $94.00


P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,047.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,047.00 V BP 2 5/16" Adj. (14,000 lb.) w/8 Hole Chan Bracket $0.00 W 3" Pintle Eye Chan Mnt (20k lb.) w/8 Hole Ch Brckt $0.00 X BP 2 5/16" Adj. Cplr w/8 Hole Chn Brckt (20k) $37.00


$319.00


Tractor Orange (n) $383.00 Grey (g) Primer + Grey (Texas) (6)

• 16,000 lb. G.V.W.R. • 8,000 lb. x 2 G.A.W.R. • HD 2 5/16" Adjustable 3 Bolt Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (8,000 lb.) • Dexter Torflex® Torsion Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 14 Ply Radial Tires (4,080 lb) • Stake Pockets & Rubrail • Electric Breakaway Kit w/ Charger • 10" x 72" Treadplate Removable Steel Fenders • Tool Tray In Tongue

• 12 Degree Tilt Pitch • 3" x 16" Cylinder • 6" Channel Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 82" Wide Tiltable Deck • 81.5" Between Fenders • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 10 year Dexter Torflex Axle Warranty

*** 8" I-beam on Goosenecks. *** Triple Axle Available on 22' and Longer

*** MAX GVWR 15,680 with Tandem 7k Axle Option and Gooseneck Option . *** *** Tilting Deck Length is 17' 2" ***


$363.00

$417.00

1 2 3 4 5 6 7 8 9 10 11 Other


HD Equipment Tilt 6" Channel (TJ) Options


(2) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Torsion ($1,013.00)

(2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter)

Electric / Torsion Included

Tail Options:

72BT (2) 7,000# (Dexter) Electric / Torsion ($1,504.00)

(2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter) Electric / Torsion

(2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter)Electric / Torsion

T* 16' Tilt Deck Incl.

92BT

82BT *

4 Plate for Winch $155.25 6 6" Taller GN Riser $165.60 9 9,990 G.V.W.R. $0.00 B Solar Battery Charger $140.30 C 12"oc Crossmembers $205.85 E Rough Oak Floor $20.13 / ft G 2nd Jack (Bumper Pull) $213.90 H Power up Power down Tilt $742.90 K Power Up/Down & Gravity Down $944.15 M Mount Only for Spare Tire $36.80 P 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings &

12"oc $50.03 / ft

Q Front Toolbox (Bumper Pull & Pintle) $205.85 T Spare Tire and Mount (Bumper Pull) $213.90 X Bulldog 2-speed Jacks (12,000 lb.) $204.70 Z Roller on Front of Deck for Winch Cable $165.60 -BWPF Blackwood Pro Full Deck $32.78 / ft -BWPO Blackwood Pro Outer Deck $20.99 / ft -CH05 GN Lockable Chain Holder $154.10 -DON1 Removable Deck on the Neck (102" Wide 96" Long) $778.55 -DR01 1 Pair D-Rings $42.55 -FR01 Fork Rack (20' and Longer) $285.20 -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $55.20 -JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks $324.30 -LT10 GN Light Bar w/4 Lights (GN Only) $357.65 -TB03 Top Riser Toolbox $500.25 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $95.45



(763) 434-2277 Powered Full Tilt (TF)

T F J 1 8 7 2 B T T K TFJ1872BTTK 18' Powered Full Tilt $6,722.00

TFJ2072BTTK 20' Powered Full Tilt $6,876.00 TFJ2272BTTK 22' Powered Full Tilt $7,031.00 TFJ2472BTTK 24' Powered Full Tilt $7,771.00

Standard Features

Coupler Options: J* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $94.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,104.00


S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,104.00 T BP 2 5/16" Adj. Cplr w/HD 6 hole Chn Brkt (20k) $51.00



$319.00


• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • Torsion Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Stake Pockets & Rubrail • Electric Breakaway Kit w/ Charger • 9" x 72" Treadplate Removable Steel Fenders • Lockable Toolbox In Tongue • 6" Channel Frame & Tongue • 3" Channel Crossmembers 16" on Center

• 2" Treated Pine Lumber Deck • 74" Wide Tiltable Deck • 82" Between Fenders • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • Hydraulic Power Up & Down • Twin 3" X 16" Cylinders • Interstate (TM) Deep Cycle Battery • 110V Integrated Trickle Charger • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 3"x 16" w/o 8"ch. & 3" x 25" w/8"ch or 24' lengths • 10 year Dexter Torflex Axle Warranty

*** 24' has 8" Channel frame & 12" I-beam Neck. *** See T6 For Gravity Tilt.

*** MAX GVWR 15,680 with Tandem 7k Axle Option and Gooseneck Option . *** Bumper Pull Tongue Length (5' 3"), Gooseneck Length (8' 6").



$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


72ST

Powered Full Tilt (TF) Options


(2) 7,000# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Torsion² $1,119.00

73BT (3) 7,000# (Dexter) Electric / Torsion $1,217.00 (2) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Torsion $316.00

Tail Options:


72BT * (2) 7,000# (Dexter) Electric / Torsion Included

T* Tilt Deck Incl.

92BT

4 Plate for Winch $155.25 5 Solar Battery Charger $140.30 6 6" Taller GN Riser $165.60 9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $205.85 E Rough Oak Floor $20.13 / ft G 2nd Jack (Bumper Pull) $215.05 M Mount Only for Spare Tire $36.80 N Diamond Plate Running Boards $10.06 / ft P 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings &

12"oc $50.03 / ft

T Spare Tire and Mount (Bumper Pull) $215.05 X Bulldog 2-speed Jacks (12,000 lb.) $204.70 Z Roller on Front of Deck for Winch Cable $146.05 -BWPF Blackwood Pro Full Deck $32.78 / ft -BWPO Blackwood Pro Outer Deck $20.99 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55 -HY05 Power Up/Down & Gravity Down Upgrade $179.40 -LT10 Light Bar w/4 Lights $357.65 -RT01 1 Pair Weld-On Strap Ratchets $66.70 -TB03 Top Riser Toolbox $500.25 -TB04 Full Size Divided Toolbox Upgrade (BP Only) $89.70 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $95.45



(763) 434-2277 6" Channel Super-Wide Tilt (TS)

T S J 1 8 7 2 B T T K TSJ1872BTTK 18' x 6" Channel Super-Wide Tilt $7,051.00

TSJ2072BTTK 20' x 6" Channel Super-Wide Tilt $7,196.00 TSJ2272BTTK 22' x 6" Channel Super-Wide Tilt $7,342.00 TSJ2472BTTK 24' x 6" Channel Super-Wide Tilt $7,487.00

Standard Features

Coupler Options: J* BP 2 5/16" Adjustable Incl. P 3" Pintle Eye - Channel-mount (21,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,104.00





$319.00


• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • Torsion Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb.) • Stake Pockets & Rubrail • Electric Breakaway Kit w/ Charger • Drive Over DP Steel Fenders

• 11 Degree Tilt Pitch • 3" x 16" Cylinder • 6" Channel Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 102" Wide Tiltable Deck • 80½" Between Fenders • DOT Approved Flushmount Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • 10 year Dexter Torflex Axle Warranty

*** 8" I-beam on Goosenecks. *** *** MAX GVWR 15,680 with Tandem 7k Axle Option and Gooseneck Option . ***



$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


6" Channel Super-Wide Tilt (TS) Options


(2) 7,000# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Torsion² $1,119.00

Tail Options:



(2) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Torsion


72ST

4 Plate for Winch $155.25 6 6" Taller GN Riser $165.60 9 9,990 G.V.W.R. $0.00 A Battery Charger $82.80 B Solar Battery Charger $140.30 C 12"oc Crossmembers $205.85 E Rough Oak Floor $20.13 / ft G 2nd Jack (Bumper Pull) $213.90 H Power up Power down Tilt $742.90 K Power Up/Down & Gravity Down $944.15 M Mount Only for Spare Tire $36.80 P 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings &

12"oc $50.03 / ft

Q Front Toolbox (Bumper Pull & Pintle) $205.85 T Spare Tire and Mount (Bumper Pull) $213.90 X Bulldog 2-speed Jacks (12,000 lb.) $204.70 Z Roller on Front of Deck for Winch Cable $165.60 -BWPF Blackwood Pro Full Deck $32.78 / ft -BWPO Blackwood Pro Outer Deck $20.99 / ft -CH05 GN Lockable Chain Holder $154.10 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55 -FR01 Fork Rack (18' and Longer) $285.20 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,797.45 -JA06 2 Hydraulic Monster Jacks™ $2,045.85 -LT10 Light Bar w/4 Lights $357.65 -RT01 1 Pair Weld-On Strap Ratchets $66.70 -TB03 Top Riser Toolbox $500.25 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $95.45



(763) 434-2277 8" Channel Tilt (T7)

T 7 J 1 6 7 2 B T T K T7J1672BTTK 16' x 8" Channel Tilt $6,293.00

T7J1872BTTK 18' x 8" Channel Tilt $6,495.00 T7J2072BTTK 20' x 8" Channel Tilt $6,696.00 T7J2272BTTK 22' x 8" Channel Tilt $6,898.00 T7J2472BTTK 24' x 8" Channel Tilt $7,100.00 T7J2672BTTK 26' x 8" Channel Tilt $7,302.00 T7J2872BTTK 28' x 8" Channel Tilt $7,504.00 T7J3072BTTK 30' x 8" Channel Tilt $7,706.00 T7J3272BTTK 32' x 8" Channel Tilt $7,907.00 T7J3472BTTK 34' x 8" Channel Tilt $8,109.00 T7J3672BTTK 36' x 8" Channel Tilt $8,311.00 T7J3872BTTK 38' x 8" Channel Tilt $8,513.00 T7J4072BTTK 40' x 8" Channel Tilt $8,715.00

Standard Features

Coupler Options: J* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $94.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00





$319.00


• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • Torsion Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Stake Pockets & Rubrail • Electric Breakaway Kit w/ Charger • 9" x 72" Treadplate Removable Steel Fenders • Tool Tray In Tongue


*** 24' and up has 12" I-beam Neck. *** Triple Axle available on 22' and longer.

*** MAX GVWR 21,000 with Triple 7k Axles and 21k+ Rated Coupler. *** Bumper Pull Tongue Length (5' 2"), Gooseneck Length (8' 7").



$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


8" Channel Tilt (T7) Options


73BT (3) 7,000# (Dexter) Electric / Torsion $1,217.00

Tail Options:



(2) 7,000# w/215/75R17.5 LR-H Singles (Dexter) Electric / Torsion²


4 Plate for Winch $155.25 6 6" Taller GN Riser $165.60 9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $205.85 E Rough Oak Floor $20.13 / ft G 2nd Jack (Bumper Pull) $213.90 M Mount Only for Spare Tire $36.80 P 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings &

12"oc $50.03 / ft

Q Front Toolbox (Bumper Pull & Pintle) $205.85 T Spare Tire and Mount (Bumper Pull) $213.90 X Bulldog 2-speed Jacks (12,000 lb.) $204.70 Z Roller on Front of Deck for Winch Cable $165.60 -BWPF Blackwood Pro Full Deck $32.78 / ft -BWPO Blackwood Pro Outer Deck $20.99 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55 -RT01 1 Pair Weld-On Strap Ratchets $66.70 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $95.45



(763) 434-2277 HD Equipment Tilt 8" Channel (TK)

T K T 1 6 8 2 B T T K TKT1682BTTK 16' HD Equipment Tilt 8" Channel $8,580.00

TKT1882BTTK 18' HD Equipment Tilt 8" Channel $8,803.00 TKT2082BTTK 20' HD Equipment Tilt 8" Channel $9,026.00 TKT2282BTTK 22' HD Equipment Tilt 8" Channel $9,249.00 TKT2482BTTK 24' HD Equipment Tilt 8" Channel $9,473.00 TKT2682BTTK 26' HD Equipment Tilt 8" Channel $9,696.00 TKT2882BTTK 28' HD Equipment Tilt 8" Channel $9,919.00 TKT3082BTTK 30' HD Equipment Tilt 8" Channel $10,142.00 TKT3282BTTK 32' HD Equipment Tilt 8" Channel $10,365.00 TKT3482BTTK 34' HD Equipment Tilt 8" Channel $10,588.00 TKT3682BTTK 36' HD Equipment Tilt 8" Channel $10,811.00 TKT3882BTTK 38' HD Equipment Tilt 8" Channel $11,034.00 TKT4082BTTK 40' HD Equipment Tilt 8" Channel $11,257.00

Standard Features

Coupler Options: T* BP 2 5/16" Adj. Cplr w/HD 6 hole Chn Brkt (20k) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $37.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00


R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,047.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,047.00 V BP 2 5/16" Adj. (14,000 lb.) w/8 Hole Chan Bracket $0.00 W 3" Pintle Eye Chan Mnt (20k lb.) w/8 Hole Ch Brckt $0.00 X BP 2 5/16" Adj. Cplr w/8 Hole Chn Brckt (20k) $37.00


Primer + Red (Texas) (1) Red (r) Desert Tan (t) Primer + Desert Tan (Texas) (8) Primer + White (Texas) (3) White (w) Primer + Tractor Orange (Texas) (5) Tractor Orange (n)

$319.00

$383.00

• 16,000 lb. G.V.W.R. • 8,000 lb. x 2 G.A.W.R. • HD 2 5/16" Adjustable 3 Bolt Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (8,000 lb.) • Dexter Torflex® Torsion Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 14 Ply Radial Tires (4,080 lb) • Stake Pockets & Rubrail • Electric Breakaway Kit w/ Charger • 10" x 72" Treadplate Removable Steel Fenders • Tool Tray In Tongue



$363.00


1 2 3 4 5 6 7 8 9 10 11 Other


HD Equipment Tilt 8" Channel (TK) Options


(3) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Torsion ($408.00)

(2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter) Electric / Torsion ($368.00)

82BT * (2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Electric / Torsion (2) 8,000# Oil Bath w/215/75R17.5 LR-H

Included

K2BT Singles(Dexter) Electric / Torsion

$761.00

Tail Options:

73BT (3) 7,000# (Dexter) Electric / Torsion ($1,042.00)

(3) 7,000# w/215/75R17.5 LR-H Singles (Dexter) Electric / Torsion


93BT

B2BT

4 Plate for Winch $155.25 5 Solar Battery Charger $140.30 6 6" Taller GN Riser $165.60 9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $205.85 E Rough Oak Floor $20.13 / ft G 2nd Jack (Bumper Pull) $213.90 M Mount Only for Spare Tire $36.80 P 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings &

12"oc $50.03 / ft

Q Front Toolbox (Bumper Pull & Pintle) $205.85 T Spare Tire and Mount (Bumper Pull) $213.90 X Bulldog 2-speed Jacks (12,000 lb.) $204.70 Z Roller on Front of Deck for Winch Cable $165.60 -BWPF Blackwood Pro Full Deck $32.78 / ft -BWPO Blackwood Pro Outer Deck $20.99 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55 -FR01 Fork Rack (20' and Longer) $285.20 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,797.45 -JA06 2 Hydraulic Monster Jacks™ $2,045.85 -TB03 Top Riser Toolbox $500.25



(763) 434-2277 Deckover Tilt (T8)

T 8 J 2 2 7 2 B S T K T8J2272BSTK 22' Deckover Tilt $7,252.00

T8J2472BSTK 24' Deckover Tilt $7,565.00 T8J2672BSTK 26' Deckover Tilt $7,877.00 T8J2872BSTK 28' Deckover Tilt $8,190.00

Standard Features






$319.00


• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Tool Tray & Lockable Toolbox In Tongue • 8" x 10 lb. I-Beam Tongue • 8" x 10 lb. I-Beam Main Frame • 22' Tilt Portion w/ 15 Degree Tilt Pitch

• 3" Channel Crossmembers 16" on Center • 2 x 6 x 1/8" Square Tubing Outer Deck Frame • 2" Treated Pine Lumber Deck • 96" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • 12VDC Hydraulic Pump • 2 - 3" x 16" Hyd. Cylinders • 12' Control Cable • Sand Blasted, Acid Washed, Powder Coated • Interstate (TM) Deep Cycle Battery • 110V Integrated Trickle Charger • GN Option Equipped with 2 Jacks • GN Equipped with Front Toolbox • GN Equipped with Chain Holder • 5 year Dexter Axle Warranty

28' or more must include Frame Bridge option. 8k axle options must include 102" wide option (R).

*** MAX GVWR 16,500 with 8k Axle Option and 16.5k+ Rated Coupler. *** Bumper Pull Tongue Length (6' 3"), Gooseneck Length (8' 9").



$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


Deckover Tilt (T8) Options


72BT (2) 7,000# (Dexter) Electric / Torsion² $308.00


72HT (2) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Torsion²

3 Solar Battery Charger $140.30

(2) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Torsion $622.00



$1,950.00


B2BS (2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter) $1,463.00 Electric / Spring² R 102" Deck Width $215.05

S Scissor Lift w/Cylinder $487.60

82BS (2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Electric / Spring² $1,781.00


X Bulldog 2-speed Jacks (12,000 lb.) $204.70

82BT (2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) $2,602.00 Electric / Torsion²

Y Spare Tire & Mount (Bumper Pull) G Rated $287.50

(2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $3,361.00

82HT (2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Torsion² (2) 8,000# Oil Bath w/215/75R17.5 LR-H

$4,183.00

K2BS

K2BT

K2HS

K2HT

Singles(Dexter) Electric / Spring² (2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter) Electric / Torsion² (2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² (2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Torsion²

$2,543.00

$3,364.00

$4,124.00

$4,945.00

Tail Options:


72BS * (2) 7,000# (Dexter) Electric / Spring Included 2 Monster Steps on Both Sides $73.60

(2) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Spring² C 12"oc Crossmembers $205.85

E

H

Rough Oak Floor 2nd Jack (Bumper Pull)Under Frame Tie Down Flat

$23.00 / ft

$3.16 / ft

K M

4" Ratchets every 4ft w/ Slide Track Mount Only for Spare Tire

$29.90 / ft $36.80

Roller on Front of Deck for Winch Cable -BWPF Blackwood Pro Full Deck

$38.24 / ft

T* 22' Tilt Incl.

92BT

82HS

-ST05 Spare Tire and Mount (BP) 215/75/R17.5 $465.75 -TB03 Top Riser Toolbox $415.15 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $95.45

-BWPO Blackwood Pro Outer Deck $24.44 / ft -CP08 Upgrade to 8 Hole Channel Adjustable Coupler $36.80 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55 -JA06 2 Hydraulic Monster Jacks™ $1,148.85 -LT10 Light Bar w/4 Lights $357.65 -PUGD Power Up/Down & Gravity Down Upgrade $179.40 -RT01 1 Pair Weld-On Strap Ratchets $66.70 -SP01 Under Frame Spare Tire & Mnt.(Not Comp.w/17.5

T/W) $349.60

$1,632.00 4 Plate for Winch $155.25 6 6" Taller GN Riser $165.60

$1,940.00 9 9,990 G.V.W.R. $0.00

B Frame Bridge $221.95



(763) 434-2277 HD Deckover Tilt (T9)

T 9 R 2 4 7 2 B S T K T9R2472BSTK 24' HD Deckover Tilt $9,795.00

T9R2672BSTK 26' HD Deckover Tilt $10,109.00 T9R2872BSTK 28' HD Deckover Tilt $10,420.00 T9R3072BSTK 30' HD Deckover Tilt $10,733.00 T9R3272BSTK 32' HD Deckover Tilt $11,046.00 T9R3472BSTK 34' HD Deckover Tilt $11,359.00 T9R3672BSTK 36' HD Deckover Tilt $11,671.00

Standard Features

Coupler Options: R* GN 2 5/16" Round (25,000 lb.) w/ Toolbox Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $0.00 P 3" Pintle Eye - Face-mount (36,000 lb.) $0.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $0.00


Powder Coat Color Options: Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00 Primer + Black (Texas) (0) $148.00 Primer + Red (Texas) (1) Red (r) $319.00 Desert Tan (t) Primer + Desert Tan (Texas) (8) Primer + White (Texas) (3) White (w) Primer + Tractor Orange (Texas) (5) Tractor Orange (n) $383.00

• 15,680 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • GN 2 5/16" Ball Bulldog Coupler 25,000 lb • Safety Chains • 2 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Monster Steps on Both Sides • 24' Tilt Portion w/ 17 Degree Tilt Pitch • 3" Channel Crossmembers 16" on Center • 2 x 6 x 1/8" Square Tubing Outer Deck Frame

• 2" Treated Pine Lumber Deck • 12" x 14 lb. I-Beam Main Frame, Riser & Neck • 102" Wide Deck • 5" x 10.5" Hyd. Cylinder w/Scissor Lift • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • 12VDC Hydraulic Pump • 12' Control Cable • Sand Blasted, Acid Washed, Powder Coated • 110V Integrated Trickle Charger • Interstate (TM) Deep Cycle Battery • GN Option Equipped with 2 Jacks • GN Equipped with Front Toolbox • GN Equipped with Chain Holder • 5 year Dexter Axle Warranty • Spare Tire & Mount

Triple Axle Requires 30' and up. *** MAX GVWR 24,000 with Triple 8k Axles. ***

Gooseneck Length (8' 10").


$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


72SS

HD Deckover Tilt (T9) Options


72BT (2) 7,000# (Dexter) Electric / Torsion² $308.00



4 Plate for Winch $155.25

(2) 7,000# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Spring² $1,851.00

73BS (3) 7,000# (Dexter) Electric / Spring $1,063.00 73BT (3) 7,000# (Dexter) Electric / Torsion $1,523.00

E Rough Oak Floor $23.00 / ft H Under Frame Tie Down Flat $3.16 / ft K 4" Ratchets every 4ft w/ Slide Track $29.90 / ft P 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 12"oc $49.74 / ft


92BS (2) 7,000# w/14 Ply LR-G Tires (Dexter)

$3,970.00 X Bulldog 2-speed Jacks (12,000 lb.) $204.70 Z Roller on Front of Deck for Winch Cable $165.60

Electric / Spring² $315.00 -BWPF Blackwood Pro Full Deck $38.24 / ft

92BT (2) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Torsion


$622.00

-BWPO Blackwood Pro Outer Deck $24.44 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55

Elec/Hyd Disc (1,600 PSI Pump) / Spring² $1,950.00 -JA06 2 Hydraulic Monster Jacks™ $2,045.85

92HT (2) 7,000# w/14 Ply LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Torsion²


$2,257.00 -LT10 Light Bar w/4 Lights $357.65


B2BS (2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter) Electric / Spring²

B2BT (2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter)

$1,463.00 -S101 1 Side-mount Toolbox 30"x14" $412.85

-S501 1 Side-mount Toolbox 72"x14" $678.50

Electric / Torsion² $2,283.00 -SM02 2 Extra Side Marker Lights, 1 Per Side $72.45

82BS (2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Electric / Spring²

82BT (2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter)

$1,781.00

-TB03 Top Riser Toolbox $415.15 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $95.45

Electric / Torsion² $2,602.00 Notes:

82HS (2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring²

82HT (2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter)

$3,361.00

² Special Order Option: Requires additional confirmation lead-time.


K2BS (2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter) Electric / Spring²

$2,543.00

Tail Options:

72BS * (2) 7,000# (Dexter) Electric / Spring Included 3 Solar Battery Charger $140.30

(2) 7,000# (Dexter) Surge Disc [Surge Coupler] / Spring² C 12"oc Crossmembers $205.85

(3) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Electric / Spring

T* 24' Tilt Incl.

-MD01 Mud Flaps Single Wheel Deckover -RT01 1 Pair Weld-On Strap Ratchets

$1,632.00 6 6" Taller GN Riser $165.60 8 Full Size Divided Toolbox Upgrade (BP Only) $89.70

$1,940.00 9 9,990 G.V.W.R. $0.00 $2,374.00

B Frame Bridge

$221.95



(763) 434-2277 Tandem Dual Tilt (TD)

T D R 2 4 A 2 B T S K TDR24A2BTSK 24' Tandem Dual Tilt $15,756.00

TDR26A2BTSK 26' Tandem Dual Tilt $15,994.00 TDR28A2BTSK 28' Tandem Dual Tilt $16,231.00 TDR30A2BTSK 30' Tandem Dual Tilt $16,469.00 TDR32A2BTSK 32' Tandem Dual Tilt $16,706.00 TDR34A2BTSK 34' Tandem Dual Tilt $16,944.00 TDR36A2BTSK 36' Tandem Dual Tilt $17,181.00 TDR38A2BTSK 38' Tandem Dual Tilt $17,418.00 TDR40A2BTSK 40' Tandem Dual Tilt $17,656.00

Standard Features

Coupler Options: R* GN 2 5/16" Round (25,000 lb.) w/ Toolbox Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) w/Tbx $0.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $379.00


H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $237.00 P 3" Pintle Eye - Face-mount (36,000 lb.) w/Tbx $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $237.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $0.00



$319.00


• 25,000 lb. G.V.W.R. • 10,000 lb. x 2 G.A.W.R • GN 2 5/16" Ball Bulldog Coupler 25,000 lb • Safety Chains • 2 - Dropleg Jacks (10,000 lb.) • 2 - Dexter Oil Bath Axles (10,000 lb.) • Torsion Suspension • 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern • 8 - 16" 235/80R16 Radial Tires (3,090 lb) • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Monster Steps on Both Sides • Lockable Front Toolbox w/Chain Holder • Self-rising Bumper • 24' Tilt Portion w/ 15 Degree Tilt Pitch • 12VDC Hydraulic Pump

• Scissor Lift • 12" x 19 lb. I-Beam Main Frame, Riser & Neck • 8" x 15 lb. I-lb. Deck Frame • 3" Channel Crossmembers 16" on Center • 2 x 6 x 1/8" Square Tubing Outer Deck Frame • Frame Bridging on 30' and Longer • 2" Treated Pine Lumber Deck • 102" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • 110V Integrated Trickle Charger • Interstate (TM) Deep Cycle Battery • 5" x 17" Hyd. Cylinder w/Scissor Lift • 10 year Dexter Torflex Axle Warranty • Spare Tire & Mount

*** MAX GVWR 28,000 with 12k Axles and 28k+ Rated Coupler. ***


$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


Tandem Dual Tilt (TD) Options


1 Hutch susp. H9700-Underslung Tandem Axle $1,193.70 4 Plate for Winch $155.25 6 6” Taller GN Riser $165.60 9 Under Frame Tie Down Flat $3.16 / ft B 22 lb. I-Beam Main Frame, Riser & Neck $19.84 / ft C 12” oc Crossmembers $205.85 E Rough Oak Floor $23.00 / ft P 11ga (1/8”) DP Steel Floor w/4 D-Rings & 12” oc $52.90 / ft R Frame Bridging $223.10 X Bulldog 2-speed Jacks (12,000 lb.) $204.70 Z Roller on Front of Deck for Winch Cable $165.60 -BWPF Blackwood Pro Full Deck $38.24 / ft -BWPO Blacwood Pro Outer Deck $24.44 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55 -JA01 HD 25k Jost 2x Jacks $614.10 -JA06 2 Hydraulic Monster JacksTM $2,045.85 -LT10 Light Bar w/4 Lights $357.65 -RT01 1 Pair Weld-On Strap Ratchets $66.70 -SLCH Solar Battery Charger $140.30 -TB03 Top Riser Toolbox $415.15 -TRA1 ½ x ½ Square Traction Bars on Rear of Deck $111.55 Notes: 2 Special Order Option: Requires additional confirmation lead-time.

S2BS


$1,078.00



$2,470.00



$3,405.00

Elec/Hyd Disc (1,600 PSI Pump) / Spring² A2BA (2) 10,000# Axles (Dexter) Electric / Air Ride² $2,709.00 A2BS (2) 10,000# Axles (Dexter) Electric / Spring $0.00 A2BT * (2) 10,000# Axles (Dexter) Electric / Torsion Included A2HA (2) 10,000# Axles (Dexter) Elec/Hyd Disc $6,427.00 (1,600 PSI Pump) / Air Ride2 A2HS (2) 10,000# Axles (Dexter) Elec/Hyd Disc $937.00 (1,600 PSI Pump) / Spring2 T2BS (2) 10,000# w/14 Ply LR-G Dual T&W (Dexter) $518.00 Electric/Spring2

T2BT (2) 10,000# w/14 Ply LR-G Dual T&W (Dexter) $516.00 Electric/Torsion2 C2BS (2) 12,000# Axles (Dexter) Electric / Spring $1,717.00 C2HA (2) 12,000# Axles (Dexter) Elec/Hyd Disc $7,665.00 (1,600 PSI Pump) / Air Ride2 C2HS (2) 12,000# Axles (Dexter) Elec/Hyd Disc $3,683.00 (1,600 PSI Pump) / Spring D2BS (2) 12,000# w/14 Ply LR-G Dual T&W (Dexter) $2,236.00 Electric / Spring2 D2HS (2) 12,000# w/14 Ply LR-G Dual T&W (Dexter) $4,200.00 Elec/Hyd Disc (1,600 PSI Pump) / Spring Tail Options: S* 24” Tilt Deck Incl.



(763) 434-2277 4" Channel Carhauler (C4)

C 4 2 1 4 3 2 C S S K C421432CSSK 14' x 4" Channel Carhauler $2,598.00

C421632CSSK 16' x 4" Channel Carhauler $2,643.00 C421832CSSK 18' x 4" Channel Carhauler $2,689.00 C422032CSSK 20' x 4" Channel Carhauler $2,734.00

Standard Features

Coupler Options: 2* BP 2" A-Frame Incl. A BP 2 5/16" A-Frame $35.00 D BP 2" Adjustable $114.00


J BP 2 5/16" Adjustable $114.00 M BP 2" Atwood Style A-Frame Coupler $0.00 N BP 2 5/16" Atwood Style A-Frame Coupler $35.00 P 3" Pintle Eye - Channel-Mount $114.00


Red (r) Tractor Orange (n) White (w)

$68.00

• 7,000 G.V.W.R. • 7,000 G.A.W.R. • 2" Ball Demco EZ Latch Coupler • Safety Chains • 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.) • 2 Dexter E-Z lube Axles, Idler & Brake (3,500 lb) • 4 Leaf Double-Eye Spring Suspension • 4 - NEW 15" White Spoke Wheels • 4 - ST205/75R15 Radial Tires (1,820 lb) • Stake Pockets

• 9" x 33" Treadplate Removable Alum Fenders • 4" Channel Frame & Tongue • 2 1/2" x 2 1/2" x 3/16" Angle Crossmembers • 2" Treated Pine Lumber Deck • 83" Wide Deck • Flushmount 6” Oval Lifetime LED Tail Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • 5 year Dexter Axle Warranty

*** MAX GVWR 7,000 *** Bumper Pull Tongue Length (3' 9").

1 2 3 4 5 6 7 8 9 10 11 Other


4" Channel Carhauler (C4) Options


32CS * (2) 3,500# (Dexter) One Electric / Spring Included 4 Plate for Winch $155.25 32ES (2) 3,500# (Dexter) Electric / Spring $189.00 7 Upgrade to 7k Jack $95.45

F Steel Diamond Plate Fenders $0.00 Tail Options: J LED Light Upgrade Clearance/Marker $48.30 S* Straight Deck w/ 5' Slide-in Ramps Incl. Q Rubrail $5.46 / ft 2 2' Dovetail w/ 5' Slide-in Ramps $51.00 T Mount Only for Spare Tire $36.80 A 2' Dovetail w/ 2 Fold-up Ramps $102.00 U Rear Trailer Support Jacks $113.85


X 16"oc Crossmembers $204.70 -BWPF Blackwood Pro Full Deck $32.78 / ft -BWPO Blackwood Pro Outer Deck $20.99 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55



(763) 434-2277 5" Channel Carhauler (C5)

C 5 2 1 6 3 2 C S S K C521632CSSK 16' x 5" Channel Carhauler $2,878.00

C521832CSSK 18' x 5" Channel Carhauler $2,924.00 C522032CSSK 20' x 5" Channel Carhauler $2,969.00 C522232CSSK 22' x 5" Channel Carhauler $3,015.00

Standard Features

Coupler Options: 2* BP 2" A-Frame Incl. A BP 2 5/16" A-Frame $35.00 J BP 2 5/16" Adjustable (14,000 lb.) $114.00 P 3" Pintle Eye - Channel-mount (14,000 lb.) $114.00

Powder Coat Color Options: Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00 Desert Tan (t) Grey (g)



$68.00

Primer + Black (Texas) (0) $148.00 Primer + Red (Texas) (1) $319.00 Primer + Desert Tan (Texas) (8) Primer + White (Texas) (3) $363.00 Primer + Tractor Orange (Texas) (5) $383.00 Primer + Grey (Texas) (6) $417.00

• 7,000 lb. G.V.W.R. • 3,500 lb. x 2 G.A.W.R. • 2" Ball Demco EZ Latch Coupler • Safety Chains • 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.) • 2- Dexter E-Z lube Axles, Idler & Brake (3,500 lb) • 4 Leaf Double-eye Spring Suspension • 4 - NEW 15" White Spoke Wheels • 4 - ST205/75R15 Radial Tires (1,820 lb) • Stake Pockets • Electric Breakaway Kit w/ Charger • 9" x 33" Treadplate Removable Alum Fenders

• 5' Channel Ramps w/ Holder • 5" Channel Frame & Tongue • 3" Channel Crossmembers 24" on Center • 2" Treated Pine Lumber Deck • 83" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty

1 2 3 4 5 6 7 8 9 10 11 Other


5" Channel Carhauler (C5) Options

Axle Options: Other Options: 32CS * (2) 3,500# (Dexter) One Electric / Spring Included 2 Upgrade to 225/75 R15 on 3.5k Axles $95.45 32ES (2) 3,500# (Dexter) Electric / Spring $189.00 3 10k Jack (Bumper Pull) $142.60

4 Plate for Winch $155.25 Tail Options: 7 Upgrade to 7k Jack $95.45 S* Straight Deck w/ 5' Slide-in Ramps Incl. 8 2 Stake Pockets In Front of Trailer $12.65 2 2' Dovetail w/ 5' Slide-in Ramps $51.00 9 4ft Expanded Metal Sides (Removable) $51.46 / ft 4 4' Dovetail w/ 5' Slide-in Ramps $51.00 A Side Mount ATV Ramps (12ft or Longer) $102.35 A 2' Dovetail w/ 2 Fold-up Ramps $102.00 B 12"oc Crossmembers $412.85 N 2' Dovetail w/ 5' Rear Slide-in Ramps $161.00 E Rough Oak Floor (Paris and Ohio Only) $16.96 / ft P 4' Dovetail w/ 5' Rear Slide-in Ramps $233.00 F Steel Diamond Plate Fenders $0.00 R Straight Deck w/ Rear Slide-in Ramps $109.00 K Expanded Metal Chain Tray $80.50

N Diamond Plate Running Boards (Paris ONLY) $10.06 / ft

P 2" Pipetop Siderails (Removable) $24.73 / ft Q Rubrail $5.46 / ft S 11ga(1/8") DP Steel Floor w/ 4 Flushmount D-Rings &

16"oc $31.34 / ft

T Mount Only for Spare Tire $36.80 U Rear Trailer Support Jacks $113.85 V Spare Tire and Mount $140.30 X 16"oc Crossmembers $204.70 Z 22" Solid Metal Sides w/ 2" pipe-top (Removable) $34.79 / ft -BWPF Blackwood Pro Full Deck $32.78 / ft -BWPO Blackwood Pro Outer Deck $20.99 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55 -TB01 Front Toolbox (Includes 7k jack upgrade) $297.85



(763) 434-2277 5" Channel Equipment (CE)

C E J 1 6 5 2 E S S K CEJ1452ESSK 14' x 5" Channel Equipment $3,546.00

CEJ1652ESSK 16' x 5" Channel Equipment $3,547.00 CEJ1852ESSK 18' x 5" Channel Equipment $3,592.00 CEJ2052ESSK 20' x 5" Channel Equipment $3,637.00 CEJ2252ESSK 22' x 5" Channel Equipment $3,683.00

Standard Features

Coupler Options: J* BP 2 5/16" Adjustable (14,000 lb.) Incl. A BP 2 5/16" A-Frame $0.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 V BP 2 5/16" Adj. (14,000 lb.) w/8 Hole Chan Bracket $71.00


W 3" Pintle Eye Chan Mnt (20k lb.) w/8 Hole Ch Brckt $71.00



$68.00


• 9,899 lb. G.V.W.R. • 5,200 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Drop Leg Jack (8,000 lb.) • 2 - Dexter E- Z lube Brake Axle (5,200 lb.) • 6 Leaf Slipper Spring Suspension • 4 -15" White Spoke Wheels • 4 - 225/75R15 Radial Tires • Stake Pockets • Electric Breakaway Kit w/ Charger • 9" x 72" Treadplate Removable Steel Fenders

• 5' Channel Ramps w/ Holder • Dual Bulldog Rear Support Jacks • 5" Channel Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 83" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • • 5 year Dexter Axle Warranty

Tongue Length (3' 5"). ***8k Drop Leg Jack Is Welded Onto Texas/Ohio Units***

***Rear support jacks standard on 16' or longer w/5200# axles or larger and also including ramps without support legs. Support legs only come standard on foldup ramps and HD gate options***


1 2 3 4 5 6 7 8 9 10 11 Other


S* Straight deck w/ 5' Slide-in Ramps Incl. 8 2 Stake Pockets In Front of Trailer $12.65 2 2' Dovetail w/ 5' Slide-in Ramps $51.00 B 12"oc Crossmembers $205.85 A 2' Dovetail w/ 2 Fold-up Ramps $102.00 E Rough Oak Floor (Texas and Ohio Only) $16.96 / ft C Straight Deck w/ 2 Fold-up Ramps $51.00 J Receiver Hitch $81.65 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $389.00 K Expanded Metal Chain Tray $80.50 K 2' Dovetail w/ Split Heavy Duty Gate $475.00 N Diamond Plate Running Boards (Texas Only) $10.06 / ft N 2' Dovetail w/ 5' Rear Slide-in Ramps $161.00 P 2" Pipetop Siderails (Removable) $24.73 / ft P 4' Dovetail w/ 5' Rear Slide-in Ramps $233.00 Q Rubrail $5.46 / ft R Straight Deck w/ Rear Slide-in Ramps $109.00 S 11ga(1/8") DP Steel Floor w/ 4 Flushmount D-Rings $50.03 / ft

T Mount Only for Spare Tire $36.80

V Spare Tire and Mount $140.30 Z 22" Solid Metal Sides w/ 2" pipe-top (Removable) $34.79 / ft -BWPF Blackwood Pro Full Deck $32.78 / ft -BWPO Blackwood Pro Outer Deck $20.99 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55 -FE05 Weld on Fenders $72.45 -TB01 Front Toolbox $203.55

5" Channel Equipment (CE) Options

Axle Options:

Other Options:

52ES * (2) 5,200# (Dexter) Electric / Spring Included 3 10k Jack (Bumper Pull) $142.60

4 Plate for Winch $155.25 Tail Options: 5 Upgrade to 235/80 R16 on 52k Axles $132.25



(763) 434-2277 6" Channel Equipment (CC)

C C J 1 6 7 2 B S S K CCJ1472BSSK 14' x 6" Channel Equipment $4,160.00

CCJ1672BSSK 16' x 6" Channel Equipment $4,160.00 CCJ1872BSSK 18' x 6" Channel Equipment $4,252.00 CCJ2072BSSK 20' x 6" Channel Equipment $4,354.00 CCJ2272BSSK 22' x 6" Channel Equipment $4,463.00 CCJ2472BSSK 24' x 6" Channel Equipment $4,581.00

Standard Features

Coupler Options: J* BP 2 5/16" Adjustable (14,000 lb.) Incl. P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,104.00





$319.00


• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Stake Pockets • Electric Breakaway Kit w/ Charger • 9" x 72" Treadplate Removable Steel Fenders • 5' Channel Ramps w/ Holder

• Dual Bulldog Rear Support Jacks • 6" Channel Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 83" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • Tool Tray In Tongue • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty

*** 8" I-beam on Goosenecks *** *** MAX GVWR Rating 24,000 with Triple 8k Axle Option and 24k+ Rated Coupler. *** Trailer will have 80" Frame with 8k, 7k Hydraulic Disc Brake, Torsion and Drop Axles.

Bumper Pull Tongue Length (4' 7"), Gooseneck Length (8' 4"). ***Rear support jacks standard on 16' or longer w/5200# axles or larger and also including ramps without support legs. Support legs only come standard on

foldup ramps and HD gate options***


$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


6" Channel Equipment (CC) Options

Axle Options:

72BD (2) 7,000# (Dexter) Electric / Drop Axle² $173.00 72BS * (2) 7,000# (Dexter) Electric / Spring Included 72BT (2) 7,000# (Dexter) Electric / Torsion $308.00

(2) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $1,632.00

Tail Options: S* Straight deck w/ 5' Slide-in Ramps Incl. 5 3.5' Dovetail w/2 Monster Ramps $606.00 A 2' Dovetail w/ 5' Slide-in Ramps $60.00 B 2' Dovetail w/ 5' Fold-up Ramps $120.00 C Straight deck w/ 5' Fold-up Ramps $60.00


72SS (2) 7,000# (Dexter)

$2,225.00

Surge Hydraulic Drum [Surge Coupler] / Spring² $1,119.00

(3) 7,000# (Dexter) Electric / Torsion Fenders Not Removable $1,523.00

(2) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Spring $315.00

K 2' Dovetail w/ Split Heavy Duty Gate $484.00 M 2' Dovetail w/ 5' Dbl Hinge Fold-up Ramps $174.00 N 2' Dovetail w/ 5' Rear Slide-in Ramps $170.00 R Straight Deck w/ Rear Slide-in Ramps $109.00 T Straight deck w/ 31x66 HD Fold-up Ramps $568.00

Other Options:

92BT (2) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Torsion


$622.00

Elec/Hyd Disc (1,600 PSI Pump) / Spring² $1,950.00

(3) 7,000# w/14 Ply LR-G Tires (Dexter)

6 6" Taller GN Riser $165.60 B Rubrail $5.46 / ft

93BS

93BT

Electric / Spring Fenders Not Removable (3) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Torsion Fenders Not Removable

$1,534.00

$1,995.00

C 12"oc Crossmembers $205.85 E Rough Oak Floor $16.96 / ft H Receiver Hitch $81.65 M 2 3/8" Pipetop on Siderails (Removable) $24.73 / ft N Diamond Plate Running Boards $10.06 / ft P 11ga(1/8") DP Steel Floor w/4 Flushmount D-Rings &

12"oc $50.03 / ft

(2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter) Electric / Spring² $1,463.00

Q Front Toolbox (Bumper Pull) $205.85 T Spare Tire and Mount (Bumper Pull) $213.90 V Rear Trailer Support Jacks $113.85 X Bulldog 2-speed Jacks (12,000 lb.) $204.70 Z 3" X 3" Square Tubing Top Rail (Removable) $24.73 / ft -BW03 Add BlackWood Pro to Dovetail $338.10

83BS

(3) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Electric / Spring² Fenders Not Removable

$3,734.00

-BWPO Blackwood Pro Outer Deck $20.99 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55 -FR01 Fork Rack $285.20 -JA06 2 Hydraulic Monster Jacks™ $2,045.85



-RT01 1 Pair Weld-On Strap Ratchets $66.70

(3) 7,000# (Dexter) Electric / Spring Fenders Not Removable

(3) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² Fenders Not Removable

(3) 7,000# w/14 Ply LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² Fenders Not Removable

(2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² (2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter)Electric / Spring²

(2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Electric / Torsion²

(2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter)Electric / Torsion²

D F

2' Dovetail w/ 31x66 HD Fold-up Ramps 4' Dovetail w/ 5' Fold-up Ramps

H J

Straight Deck w/ 4' Heavy Duty Fold-up Gate 2' Dovetail w/ 4' Heavy Duty Fold-up Gate

2 4

2nd Jack (Bumper Pull) Plate for Winch


72HS

73BT

92BS

B2BS



(763) 434-2277 8" Channel Equipment (C8)

C8A2072BSSK 20' x 8" Channel Equipment $5,119.00





Standard Features


Coupler Options: A* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $94.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00


R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,104.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,104.00



$319.00


18' x 8" Channel Equipment $5,119.00

C 8 A 2 0 7 2 B S S K






• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Stake Pockets • Electric Breakaway Kit w/ Charger • 9" x 72" Treadplate Removable Steel Fenders • 5' Channel Ramps w/ Holder

• Dual Bulldog Rear Support Jacks • 8" Channel Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 83" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • Tool Tray In Tongue • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty

*** 24' and up has 12" I-beam Neck. *** *** MAX GVWR Rating 24,000 with Triple 8k Axle Option and 24k+ Rated Coupler. *** Trailer will have 80" Frame with 8k, 7k Hydraulic Disc Brake, Torsion and Drop Axles.

Bumper Pull Tongue Length (4' 9"), Gooseneck Length ( 8' 4"). ***Rear support jacks standard on 16' or longer w/5200# axles or larger and also including ramps without support legs. Support legs only come standard on

foldup ramps and HD gate options*** *** GN coupler options include Spare Tire & Mount***


$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


8" Channel Equipment (C8) Options

Axle Options:

72BS * (2) 7,000# (Dexter) Electric / Spring Included 72BT (2) 7,000# (Dexter) Electric / Torsion $308.00

(3) 7,000# (Dexter) Electric / Spring Fenders Not Removable $1,063.00

Tail Options: S* Straight deck w/ 5' Slide-in Ramps Incl. 5 3.5' Dovetail w/2 Monster Ramps $606.00 A 2' Dovetail w/ 5' Slide-in Ramps $60.00 B 2' Dovetail w/ 5' Fold-up Ramps $120.00

D 2' Dovetail w/31x66 HD Fold-up Ramps $628.00


$315.00 E 4' Dovetail w/ 5' Slide-in Ramps $60.00

(3) 7,000# w/14 Ply LR-G Tires (Dexter) F 4' Dovetail w/ 5' Fold-up Ramps $120.00

93BS Electric / Spring² $1,534.00 M 2' Dovetail w/ 5' Dbl Hinge Fold-up Ramps $174.00

Fenders Not Removable N 2' Dovetail w/ 5' with Rear Slide-in Ramps $170.00 (2) 8,000# Oil Bath Axles, 235/80 LR-E Tires B2BS (Dexter)

Electric / Spring² $1,463.00

Other Options:


4 Plate for Winch $155.25 6 6" Taller GN Riser $165.60 9 9,990 G.V.W.R. $0.00

C 12"oc Crossmembers $205.85

H Receiver Hitch $81.65

N Diamond Plate Running Boards $10.06 / ft

Q Front Toolbox (Bumper Pull) $205.85




-DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55

-JA06 2 Hydraulic Monster Jacks™ $2,045.85



73BD (3) 7,000# (Dexter) Electric / Drop Axle² Fenders Not Removable

C Straight deck w/ 5' Fold-up Ramps $60.00

2 2nd Jack (Bumper Pull) $213.90

B Rubrail $5.46 / ft


M 2 3/8" Pipetop on Siderails (Removable) $24.73 / ft

11ga(1/8") DP Steel Floor w/4 Flushmount D-Rings & 12"oc

$50.03 / ft

S Mount Only for Spare Tire $36.80

V Rear Trailer Support Jacks $113.85

Z 3" X 3" Square Tubing Top Rail (Removable) $24.73 / ft

-BWPO Blackwood Pro Outer Deck $20.99 / ft


-ST05 Spare Tire and Mount (BP) 215/75/R17.5 $465.75

(2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring²

73BS

82BS



(763) 434-2277 8" Pro-Beam Equipment (H4)

H 4 T 2 0 8 2 B S S K H4T2082BSSK 20' x 8" Pro-Beam Equipment $6,645.00

H4T2282BSSK 22' x 8" Pro-Beam Equipment $6,817.00 H4T2482BSSK 24' x 8" Pro-Beam Equipment $6,991.00 H4T2682BSSK 26' x 8" Pro-Beam Equipment $7,163.00 H4T2882BSSK 28' x 8" Pro-Beam Equipment $7,336.00

Standard Features

Coupler Options: T* BP 2 5/16" Adj. Cplr w/HD 6 hole Chn Brkt (20k) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $37.00 C Rigid Mount Pintle Eye- Face-mount $94.00


P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,047.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,047.00 W 3" Pintle Eye Chan Mnt (20k lb.) w/8 Hole Ch Brckt $0.00



$319.00


• 16,000 lb. G.V.W.R. • 8,000 lb. x 2 G.A.W.R. • HD 2 5/16" Adjustable 3 Bolt Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (8,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 14 Ply Radial Trs (4,080 lb) • Rubrail w/Stake Pockets • Electric Breakaway Kit w/ Charger • 9" x 72" Treadplate Removable Steel Fenders • 5' Channel Ramps w/ Holder

• Dual Bulldog Rear Support Jacks • 8" x 10 lb. I-Beam Main Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 82" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • Tool Tray In Tongue • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty



$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


Rough Oak Floor $16.96 / ft

8" Pro-Beam Equipment (H4) Options

Axle Options: Other Options: 82BS * (2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter)

Electric / Spring Included 2 2nd Jack (Bumper Pull) $213.90 4 Plate for Winch $155.25 5 Solar Battery Charger $140.30 6 6" Taller GN Riser $165.60 C 12"oc Crossmembers $205.85

K2BS

(2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter)

$761.00

Electric / Spring Tail Options:

S* Straight Deck w/ 5' Rear Slide-in Ramps Incl. H Receiver Hitch $81.65 5 3.5' Dovetail w/2 Monster Ramps $606.00 M 2 3/8" Pipetop on Siderails (Removable) $24.73 / ft D 2' Dovetail w/ 31x66 HD Fold-up Ramps $628.00 P 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 12"oc $50.03 / ft

Q Front Toolbox (Bumper Pull) $205.85 S Mount Only for Spare Tire $36.80 V Rear Trailer Support Jacks $113.85 X Bulldog 2-speed Jacks (12,000 lb.) $204.70 -BW03 Add BlackWood Pro to Dovetail $338.10 -BWPF Blackwood Pro Full Deck $32.78 / ft -BWPO Blackwood Pro Outer Deck $20.99 / ft -CP08 Upgrade to 8 Hole Channel Adjustable Coupler $36.80 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DON1 Removable Deck on the Neck (102" Wide 96" Long) $778.55 -DP01 Add 11ga Diamond Plate to Top of Slide in Ramps $173.65 -DR01 1 Pair D-Rings $42.55 -DS05 3/16" DP Steel Floor w/4 Flushmount D-Rings &

12"oc $60.09 / ft

-EL01 Add 7-Way RV Plug to Rear Bumper $112.70 -FE05 Weld on Fenders $72.45 -FE06 1/4" DP HD Weld on Fenders Tandem Axle $357.65 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,797.45 -JA06 2 Hydraulic Monster Jacks™ $2,045.85 -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $55.20 -JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks $324.30 -LT05 Add LED Reverse Lights $155.25 -LT10 Light Bar w/4 Lights $357.65 -NF01 No Flooring - $3.45 / ft -PS00 No Pin Striping $0.00 -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $465.75 -ST06 Spare Tire & Mount (Bumper Pull) G Rated $287.50 -TB03 Top Riser Toolbox $500.25 -TB04 Full Size Divided Toolbox Upgrade (BP Only) $292.10 -TBTL Locking Lid Over Tongue $209.30 -WN12 Smittybilt Winch 12K w/Plate & Battery $1,647.95 -WN18 Smittybilt Winch 17.5K w/HD Plate & Battery $2,075.75 -WN95 Smittybilt Winch 9.5k w/ Plate, Btry, & Frt Tbx $1,104.00



(763) 434-2277 10" Pro-Beam Equipment (H5)

H 5 P 2 0 S 2 B T S K H5P20S2BTSK 20' x 10" Pro-Beam Equipment $8,556.00

H5P22S2BTSK 22' x 10" Pro-Beam Equipment $8,756.00 H5P24S2BTSK 24' x 10" Pro-Beam Equipment $8,955.00 H5P26S2BTSK 26' x 10" Pro-Beam Equipment $9,154.00 H5P28S2BTSK 28' x 10" Pro-Beam Equipment $9,353.00 H5P30S2BTSK 30' x 10" Pro-Beam Equipment $9,552.00 H5P32S2BTSK 32' x 10" Pro-Beam Equipment $9,751.00

Standard Features

Coupler Options: P* 3" Pintle Eye - Face-mount (36,000 lb.) Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,047.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,047.00



• 20,000 lb. G.V.W.R. • 10,000 lb. x 2 G.A.W.R. • 3" Pintle Eye Face Mount Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter Oil Bath Axles (10,000 lb.) • Torsion Suspension • 4 - 17.5" Grey Wheels • 235/75/R17.5 LR-J 8-hole SINGLE • Rubrail w/ Stake Pockets • Electric Breakaway Kit w/ Charger • 9" x 81" Treadplate Removable Steel Fenders • 5' Channel Ramps w/ Holder

• Dual Bulldog Rear Support Jacks • 10" x 19 lb. I-Beam Main Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 82" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • Tool Tray In Tongue • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty • Spare Tire & Mount


$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


10" Pro-Beam Equipment (H5) Options


Tail Options:

S* Straight Deck w/ 5' Rear Slide-in Ramps Incl. 5 3.5' Dovetail w/2 Monster Ramps $606.00 D 2' Dovetail w/ 31x66 HD Fold-up Ramps $628.00

(2) 10,000# w/235/75R17.5" LR-J Single T&W S2BT * (Dexter)

Electric / Torsion

2 2nd Jack (Bumper Pull) $213.90 4 Plate for Winch $155.25 5 Solar Battery Charger $140.30 6 6" Taller GN Riser $165.60 C 12"oc Crossmembers $205.85 E Rough Oak Floor $16.96 / ft H Receiver Hitch $81.65 M 2 3/8" Pipetop on Siderails (Removable) $24.73 / ft P 11ga(1/8") DP Steel Floor w/4 Flushmount D-Rings &

12"oc $50.03 / ft

Q Front Toolbox (Bumper Pull) $205.85 V Rear Trailer Support Jacks $113.85 X Bulldog 2-speed Jacks (12,000 lb.) $204.70 -BW03 Add BlackWood Pro to Dovetail $338.10 -BWPF Blackwood Pro Full Deck $32.78 / ft -BWPO Blackwood Pro Outer Deck $20.99 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DON1 Removable Deck on the Neck (102" Wide 96" Long) $778.55 -DP01 Add 11ga Diamond Plate to Top of Slide in Ramps $173.65 -DR01 1 Pair D-Rings $42.55 -DS05 3/16" DP Steel Floor w/4 Flushmount D-Rings & 12"oc $60.09 / ft -EL01 Add 7-Way RV Plug to Rear Bumper $112.70 -FE05 Weld on Fenders $72.45 -FE06 1/4" DP HD Weld on Fenders Tandem Axle $357.65 -JA01 HD 25k Jost 2x Jacks $614.10 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,797.45 -JA06 2 Hydraulic Monster Jacks™ $2,045.85 -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $55.20 -JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks $324.30 -JABG Upgrade to BULLDOG 10k Jacks (Gooseneck Only) $110.40 -LT05 Add LED Reverse Lights $155.25 -LT10 Light Bar w/4 Lights $357.65 -NF01 No Flooring - $3.45 / ft -PS00 No Pin Striping $0.00 -RM30 No Ramps No Ramp Pockets -$86.25 -SL04 4 Side Marker 3/4" Bullet Lights, 2 Per Side $142.60 -TB03 Top Riser Toolbox $500.25 -TB04 Full Size Divided Toolbox Upgrade (BP Only) $292.10 -WN12 Smittybilt Winch 12K w/Plate & Battery $1,647.95 -WN18 Smittybilt Winch 17.5K w/HD Plate & Battery $2,075.75 -WN95 Smittybilt Winch 9.5k w/ Plate, Btry, & Frt Tbx $1,104.00 -WP04 HD GN Winch Plate (Rec. for 18k Winches) $198.95



(763) 434-2277 8" Pro-Beam Super-Wide Equip (H6)

H 6 T 2 0 8 2 B S S K H6T2082BSSK 20' x 8" Pro-Beam Super-Wide Equip $7,044.00

H6T2282BSSK 22' x 8" Pro-Beam Super-Wide Equip $7,243.00 H6T2482BSSK 24' x 8" Pro-Beam Super-Wide Equip $7,442.00 H6T2682BSSK 26' x 8" Pro-Beam Super-Wide Equip $7,641.00 H6T2882BSSK 28' x 8" Pro-Beam Super-Wide Equip $7,840.00 H6T3082BSSK 30' x 8" Pro-Beam Super-Wide Equip $8,038.00

Standard Features

Coupler Options: T* BP 2 5/16" Adj. Cplr w/HD 6 hole Chn Brkt (20k) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $37.00 C Rigid Mount Pintle Eye- Face-mount (25,000) $94.00


P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,047.00 W 3" Pintle Eye Chan Mnt (20k lb.) w/8 Hole Ch Brckt $0.00



$319.00


• 16,000 lb. G.V.W.R. • 8,000 lb. x 2 G.A.W.R. • HD 2 5/16" Adjustable 3 Bolt Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (8,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 14 Ply Radial Trs (4,080 lb) • Rubrail w/Stake Pockets • Electric Breakaway Kit w/ Charger • HD Drive Over 1/4" Diamond Plate Fenders

• 5' Channel Ramps w/ Holder • 8" x 10 lb. I-Beam Main Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 102" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • Tool Tray In Tongue • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty



$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


Rough Oak Floor $16.96 / ft

8" Pro-Beam Super-Wide Equip (H6) Options

Axle Options: Other Options: 82BS * (2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter)

Electric / Spring Included 2 2nd Jack (Bumper Pull) $213.90 4 Plate for Winch $155.25 5 Solar Battery Charger $140.30 6 6" Taller GN Riser $165.60 C 12"oc Crossmembers $205.85

K2BS

(2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter)

$761.00

Electric / Spring Tail Options:

S* Straight Deck w/ 5' Rear Slide-in Ramps Incl. H Receiver Hitch $81.65 5 3.5' Dovetail w/2 Monster Ramps $741.00 P 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 12"oc $50.03 / ft D 2' Dovetail w/ 31x66 HD Fold-up Ramps $641.00 Q Front Toolbox (Bumper Pull) $205.85

S Mount Only for Spare Tire $36.80 V Rear Trailer Support Jacks $113.85 X Bulldog 2-speed Jacks (12,000 lb.) $204.70 -BW03 Add BlackWood Pro to Dovetail $338.10 -BWPF Blackwood Pro Full Deck $32.78 / ft -BWPO Blackwood Pro Outer Deck $20.99 / ft -CP08 Upgrade to 8 Hole Channel Adjustable Coupler $36.80 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DON1 Removable Deck on the Neck (102" Wide 96" Long) $778.55 -DP01 Add 11ga Diamond Plate to Top of Slide in Ramps $173.65 -DR01 1 Pair D-Rings $42.55 -DS05 3/16" DP Steel Floor w/4 Flushmount D-Rings &

12"oc $60.09 / ft

-EL01 Add 7-Way RV Plug to Rear Bumper $112.70 -FE05 Weld on Fenders $72.45 -FE06 1/4" DP HD Weld on Fenders Tandem Axle $357.65 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,797.45 -JA06 2 Hydraulic Monster Jacks™ $2,045.85 -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $55.20 -JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks $324.30 -LT05 Add LED Reverse Lights $155.25 -NF01 No Flooring - $3.45 / ft -PS00 No Pin Striping $0.00 -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $465.75 -ST06 Spare Tire & Mount (Bumper Pull) G Rated $287.50 -TB03 Top Riser Toolbox $500.25 -TB04 Full Size Divided Toolbox Upgrade (BP Only) $292.10 -WN12 Smittybilt Winch 12K w/Plate & Battery $1,647.95 -WN18 Smittybilt Winch 17.5K w/HD Plate & Battery $2,075.75 -WN95 Smittybilt Winch 9.5k w/ Plate, Btry, & Frt Tbx $1,104.00


H7P24S2BTSK 24' x 10" Pro-Beam Super-Wide Equip $9,407.00






(763) 434-2277 10" Pro-Beam Super-Wide Equip (H7)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features






Coupler Options: P* 3" Pintle Eye - Face-mount (36,000 lb.) Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,047.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,047.00



20' x 10" Pro-Beam Super-Wide Equip $8,955.00

H 7 P 2 0 S 2 B T S K

• 20,000 lb. G.V.W.R. • 10,000 lb. x 2 G.A.W.R. • 3" Pintle Eye Face Mount Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter Oil Bath Axles (10,000 lb.) • Torsion Suspension • 4 - 17.5" Grey Wheels • 235/75/R17.5 LR-J 8-hole SINGLE • Rubrail w/ Stake Pockets • Electric Breakaway Kit w/ Charger • HD Drive Over 1/4" Diamond Plate Fenders • 5' Channel Ramps w/ Holder

• Dual Bulldog Rear Support Jacks • 10" x 19 lb. I-Beam Main Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 102" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • Tool Tray In Tongue • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty • Spare Tire & Mount


$363.00


10" Pro-Beam Super-Wide Equip (H7) Options


Tail Options:

S* Straight Deck w/ 5' Rear Slide-in Ramps Incl. 5 3.5' Dovetail w/2 Monster Ramps $741.00 D 2' Dovetail w/ 31x66 HD Fold-up Ramps $641.00

(2) 10,000# w/235/75R17.5" LR-J Single T&W S2BT * (Dexter)

Electric / Torsion

2 2nd Jack (Bumper Pull) $213.90 4 Plate for Winch $155.25 5 Solar Battery Charger $274.85 6 6" Taller GN Riser $165.60 C 12"oc Crossmembers $205.85 E Rough Oak Floor $16.96 / ft H Receiver Hitch $81.65 P 11ga(1/8") DP Steel Floor w/4 Flushmount D-Rings &

12"oc $50.03 / ft

Q Front Toolbox (Bumper Pull) $205.85 V Rear Trailer Support Jacks $113.85 X Bulldog 2-speed Jacks (12,000 lb.) $204.70 -BW03 Add BlackWood Pro to Dovetail $338.10 -BWPF Blackwood Pro Full Deck $32.78 / ft -BWPO Blackwood Pro Outer Deck $20.99 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DON1 Removable Deck on the Neck (102" Wide 96" Long) $778.55 -DP01 Add 11ga Diamond Plate to Top of Slide in Ramps $173.65 -DR01 1 Pair D-Rings $42.55 -DS05 3/16" DP Steel Floor w/4 Flushmount D-Rings & 12"oc $60.09 / ft -EL01 Add 7-Way RV Plug to Rear Bumper $112.70 -FE05 Weld on Fenders $72.45 -FE06 1/4" DP HD Weld on Fenders Tandem Axle $357.65 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,797.45 -JA06 2 Hydraulic Monster Jacks™ $2,045.85 -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $55.20 -JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks $324.30 -JABG Upgrade to BULLDOG 10k Jacks (Gooseneck Only) $110.40 -LT05 Add LED Reverse Lights $155.25 -LT10 Light Bar w/4 Lights $357.65 -NF01 No Flooring - $3.45 / ft -PS00 No Pin Striping $0.00 -RM30 No Ramps No Ramp Pockets -$86.25 -SL04 4 Side Marker 3/4" Bullet Lights, 2 Per Side $142.60 -TB03 Top Riser Toolbox $500.25 -TB04 Full Size Divided Toolbox Upgrade (BP Only) $292.10 -WN12 Smittybilt Winch 12K w/Plate & Battery $1,647.95 -WN18 Smittybilt Winch 17.5K w/HD Plate & Battery $2,075.75 -WN95 Smittybilt Winch 9.5k w/ Plate, Btry, & Frt Tbx $1,104.00 -WP04 HD GN Winch Plate (Rec. for 18k Winches) $198.95



(763) 434-2277 Angle Pipetop Trailer (P8)

P 8 J 1 6 7 2 B S S K P8J1672BSSK 16' Angle Pipetop Trailer $4,395.00

P8J1872BSSK 18' Angle Pipetop Trailer $4,443.00 P8J2072BSSK 20' Angle Pipetop Trailer $4,491.00 P8J2272BSSK 22' Angle Pipetop Trailer $4,584.00 P8J2472BSSK 24' Angle Pipetop Trailer $4,679.00 P8J2672BSSK 26' Angle Pipetop Trailer $4,727.00

Standard Features



R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,104.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,104.00



$319.00


• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Jack (7,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Dual Bulldog Rear Support Jacks • Electric Breakaway Kit w/ Charger • 5' Channel Ramps w/ Holder

• 2x3 Angle Upright • 2 7/8 Pipe Top Rail • 5" Channel Tongue & 3" x 5" Angle Frame • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty

Trailer will have 80" Frame with 8k, 7k Hydraulic Disc Brake, Torsion and Drop Axles. *** MAX GVWR 16,000 with 8k axles and 16k+ Rated Coupler. ***

Bumper Pull Tongue Length (3' 9"), Gooseneck Length (8' 5"). ***Rear support jacks standard on 16' or longer w/5200# axles or larger and also including ramps without support legs. Support legs only come standard on



$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


Angle Pipetop Trailer (P8) Options


72BS * (2) 7,000# (Dexter) Electric / Spring Included

72HS (2) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring $1,469.00

72SS (2) 7,000# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Spri ng² $1,119.00

92BS (2) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Spring $315.00

Tail O ptions:

S* Straight deck w/ 5' Slide-in Ramps Incl. A 2' Dovetail w/ 5' Slide-in Ramps $95.00 B 2' Dovetail w/ 5' Fold-up Ramps $146.00 C Straight deck w/ 5' Fold-up Ramps $51.00 K 2' Dovetaill w/ Split Heavy Duty Gate $520.00


72BD (2) 7,000# (Dexter) Electric / Drop Axle $154.00 3 10k Jack (Bumper Pull) $142.60 6 6" Taller GN Riser $165.60 A Upgrade to 3" X 3 $0.00 4 Plate for Winch $155.25 C 12"oc Crossmembers $205.85 E Rough Oak Floor $20.13 / ft H Receiver Hitch $81.65 P 11ga(1/8") DP Steel Floor w/4 Flushmount D-Rings &

12"oc $50.03 / ft

Q Front Toolbox (Bumper Pull) $205.85 S Mount Only for Spare Tire $36.80 T Spare Tire and Mount $213.90 V Rear Trailer Support Jacks $113.85 -BWPF Blackwood Pro Full Deck $32.78 / ft -BWPO Blackwood Pro Outer Deck $20.99 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55 -EL01 Add 7-Way RV Plug to Rear Bumper $112.70 -LT10 Light Bar w/4 Lights $357.65 -TB03 Top Riser Toolbox $500.25



(763) 434-2277 5" Channel Buggy Hauler (B5)

B 5 2 1 6 3 2 C S S K B521632CSSK 16' x 5" Channel Buggy Hauler $3,426.00

B521832CSSK 18' x 5" Channel Buggy Hauler $3,471.00 B522032CSSK 20' x 5" Channel Buggy Hauler $3,516.00 B522232CSSK 22' x 5" Channel Buggy Hauler $3,560.00

Standard Features

Coupler Options: 2* BP 2" A-Frame Incl. A BP 2 5/16" A-Frame $35.00 J BP 2 5/16" Adjustable $114.00 P 3" Pintle Eye - Channel-mount (14,000 lb.) $114.00




$68.00


• 7,000 lb. G.V.W.R. • 3,500 lb. x 2 G.A.W.R. • 2" Ball Demco EZ Latch Coupler • Safety Chains • 1 - Top Wind Drop-Leg Jack (8,000 lb.) • 2 Dexter E-Z lube Axles, Idler & Brake (3,500 lb) • 4 Leaf Double-eye Spring Suspension • 4 - NEW 15" White Spoke Wheels • 4 -ST205/75R15 Radial Tires (1,820 lb) • Electric Breakaway Kit w/ Charger • Rubrail & Stake Pockets

• 9" High Drive Over DP Steel Fenders • 5' Channel Ramps w/ Holder • 5" Channel Frame & Tongue • 3" Channel Crossmembers 24" on Center • 2" Treated Pine Lumber Deck • 102" Wide Deck • DOT Approved Flushmount LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • 82 1/2 " Between the Fenders • 5 year Dexter Axle Warranty

*** MAX GVWR 10,400 with 5200 lb Axle Option. *** Bumper Pull Tongue Length (3' 10").

***16"oc crossmembers on 16' and longer with 5200# axle option*** ***Rear support jacks standard on 16' or longer w/5200# axles or larger and also including ramps without support legs. Support legs only come standard on


1 2 3 4 5 6 7 8 9 10 11 Other


5" Channel Buggy Hauler (B5) Options


Surge Hydraulic Drum [Surge Coupler] / Spri

Tail Options:

X 16"oc Crossmembers $204.70 -BWPF Blackwood Pro Full Deck $32.78 / ft -BWPO Blackwood Pro Outer Deck $20.99 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55



32CS * (2) 3,500# (Dexter) One Electric / Spring Included 3 10k Jack (Bumper Pull) $142.60 32ES (2) 3,500# (Dexter) Electric / Spring $189.00 4 Plate for Winch $155.25

32SS (2) 3,500# (Dexter) $992.00 Surge Hydraulic Drum [Surge Coupler] / Spring²

C 12" oc Crossmembers $412.85 S 11ga(1/8) DP Steel Floor w/4 Flushmount D-Rings & $50.03 / ft

16"oc T Mount Only for Spare Tire $36.80 U Rear Trailer Support Jacks $113.85

52CS (2) 5,200# (Dexter) One Electric / Spring $322.00 52ES (2) 5,200# (Dexter) Electric / Spring $574.00

52SS (2) 5,200# (Dexter) g² $1,515.00

S* Straight Deck w/ 5' Slide-in Ramps Incl. 2 2' Dovetail w/ 5' Slide-in Ramps $64.00 A 2' Dovetail w/ 2 Fold-up Ramps $131.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $446.00 N 2' Dovetail w/ 5' Rear Slide-in Ramps $175.00 R Straight Deck w/ Rear Slide-in Ramps $109.00



(763) 434-2277 6" Channel Super-Wide (B6)

B 6 J 2 0 7 2 B S S K B6J1872BSSK 18' x 6" Channel Super-Wide $5,586.00

B6J2072BSSK 20' x 6" Channel Super-Wide $5,586.00 B6J2272BSSK 22' x 6" Channel Super-Wide $5,658.00 B6J2472BSSK 24' x 6" Channel Super-Wide $5,728.00

Standard Features






$319.00


• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Electric Breakaway Kit w/ Charger • 5' Channel Ramps w/ Holder • Dual Bulldog Rear Support Jacks • 6" Channel Frame & Tongue

• 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 102 Wide Deck • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • Fender Rating: 4,000 lbs/ea • Rubrail w/Stake Pockets • Tool Tray In Tongue • DOT Approved Flushmount Lifetime LED Lights • GN Option Equipped with 2 Jacks • 82 1/2 " Between the Fenders • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty

*** 8" I-beam on Goosenecks. *** Triple Axle Option Available on 20' and longer.

Trailer is 81" wide between the fenders. Trailer will have 80" between fenders with 8k, 7k Hydraulic Disc Brake, Torsion and Drop Axles.

*** MAX GVWR 16,500 with 8k Axle Option and 16.5k+ Rated Coupler. *** Bumper Pull Tongue Length (4' 7").




$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


6" Channel Super-Wide (B6) Options


(2) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $1,632.00


Tail Options:

S* Straight deck w/ 5' Slide-in Ramps Incl. A 2' Dovetail w/ 5' Slide-in Ramps $74.00 B 2' Dovetail w/ 5' Fold-up Ramps $146.00 C Straight deck w/ 5' Fold-up Ramps $74.00 D 2' Dovetail w/ 31x66 HD Fold-up Ramps $641.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $454.00 K 2' Dovetail w/ Split Heavy Duty Gate $539.00 L 3.5' Dovetail w/2 Monster Ramps $741.00 N 2' Dovetail w/ 5' Rear Slide-in Ramps $183.00 P 4' Dovetail w/ 5' Rear Slide-in Ramps $256.00 R Straight Deck w/ Rear Slide-in Ramps $109.00 T Straight deck w/ 31x66 HD Fold-up Ramps $567.00



(2) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Spring²

72HS

82BS

2 2nd Jack (Bumper Pull) $213.90 4 Plate for Winch $155.25 6 6" Taller GN Riser $165.60 9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $205.85 E Rough Oak Floor $23.00 / ft H Receiver Hitch $81.65 M 2 3/8" Pipetop Siderails (Removable) $24.73 / ft P 11ga(1/8")DP Steel Floor w/ 4 Flushmount D-Rings &

12"oc $50.03 / ft

Q Front Toolbox (Bumper Pull) $205.85 S Mount Only for Spare Tire $36.80 T Spare Tire and Mount (Bumper Pull) $213.90 V Rear Trailer Support Jacks $113.85 X Bulldog 2-speed Jacks (12,000 lb.) $204.70 -BWPF Blackwood Pro Full Deck $32.78 / ft -BWPO Blackwood Pro Outer Deck $20.99 / ft -CP08 Upgrade to 8 Hole Channel Adjustable Coupler $36.80 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55 -EL01 Add 7-Way RV Plug to Rear Bumper $112.70 -LT10 Light Bar w/4 Lights $357.65 -OD01 1 Pair Flushmount D-Rings on Steel Outer Deck $42.55 -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $465.75 -TB03 Top Riser Toolbox $500.25



(763) 434-2277 8" Channel Super-Wide (B8)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features

B8J2272BSSK 22' x 8" Channel Super-Wide $6,211.00










$319.00


20' x 8" Channel Super-Wide $5,991.00

B 8 J 2 0 7 2 B S S K





• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Electric Breakaway Kit w/ Charger • 5' Channel Ramps w/ Holder • Dual Bulldog Rear Support Jacks

• 8" Channel Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • Rubrail w/Stake Pockets • Tool Tray In Tongue • 81" Between the Fenders • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty

*** 24' and up has 12" I-beam Neck. *** Trailer will have 80" between fenders with 8k, 7k Hydraulic Disc Brake, Torsion and Drop Axles.

*** MAX GVWR 24,000 with Triple 8k Axles and 24k+ Rated Coupler. *** Bumper Pull Tongue Length (5').





$363.00


8" Channel Super-Wide (B8) Options

Axle Options:

72BS * (2) 7,000# (Dexter) Electric / Spring Included 72BT (2) 7,000# (Dexter) Electric / Torsion² $308.00 73BS (3) 7,000# (Dexter) Electric / Spring $1,491.00

(3) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Spring² $1,534.00

Tail Options: S* Straight deck w/ 5' Slide-in Ramps Incl. A 2' Dovetail w/ 5' Slide-in Ramps $74.00 B 2' Dovetail w/ 5' Fold-up Ramps $146.00 E 4' Dovetail w/ 5' Slide-in Ramps $74.00


Other Options:


(2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter) Electric / Spring²

2 2nd Jack (Bumper Pull) $213.90 4 Plate for Winch $155.25 6 6" Taller GN Riser $165.60 C 12"oc Crossmembers $205.85 E Rough Oak Floor $23.00 / ft H Receiver Hitch $81.65 P 11ga(1/8") DP Steel Floor w/4 Flushmount D-Rings &

12"oc $50.03 / ft

Q Front Toolbox (Bumper Pull) $205.85 S Mount Only for Spare Tire $36.80 T Spare Tire and Mount (Bumper Pull) $213.90 V Rear Trailer Support Jacks $113.85 X Bulldog 2-speed Jacks (12,000 lb.) $204.70 -BW03 Add BlackWood Pro to Dovetail $338.10 -BWPF Blackwood Pro Full Deck $32.78 / ft -BWPO Blackwood Pro Outer Deck $20.99 / ft -CP08 Upgrade to 8 Hole Channel Adjustable Coupler $36.80 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $42.55 -DR01 1 Pair D-Rings $42.55 -JA06 2 Hydraulic Monster Jacks™ $2,045.85 -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $465.75 -SM02 2 Extra Side Marker Lights, 1 Per Side $72.45 -TB03 Top Riser Toolbox $500.25

93BS

82BS

L 3.5' Dovetail w/2 Monster Ramps $741.00 N 2' Dovetail w/ 5' Rear Slide-in Ramps $183.00 P 4' Dovetail w/ 5' Rear Slide-in Ramps $256.00 R Straight Deck w/ Rear Slide-in Ramps $109.00



(763) 434-2277 60" Utility Dump (D5)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features

Coupler Options: A* 2" A-Frame (7,000 lb.) Incl. D BP 2 5/16" Adjustable (14,000 lb.) $135.00 P 3" Pintle Eye - Channel-mount (21,000 lb.) $135.00




• 5,200 lb. G.V.W.R. • 5,200 lb. x 1 G.A.W.R. • 2" Ball Bulldog Coupler • Safety Chains • 1 - Drop Leg Jack (7,000 lb.) • 1 - Dexter E- Z lube Brake Axle (5,200 lb.) • 6 Leaf Double-eye Spring Suspension • 2 - 15" White Spoke Wheels • 2 - ST225/75B15 (2540 lb) • Electric Breakaway Kit w/ Charger • 1/8" Treadplate Steel Fenders • Lockable Toolbox (Houses Battery and Pump) • Barn Door Gate w/ Camlatch • 4 - D-Rings • 40° Dump Pitch • 12VDC Hydraulic Pump

• 3" x 30" Hyd. Cylinder • 12' Control Cable • 4" Channel Main Frame & Tongue • 2" x 4" x 11ga. Tubing Bed Frame • 3" Channel Crossmembers 16"oc • Mounting Brackets for Roll-up Tarp • 10ga. Steel Bed • 5' Wide Bed • 10ga. Steel Sides • 18" High Sides • DOT Approved Flushmount Lifetime LED Lights • Double Insulated Harness w/Cold Weather Cord 7-way • Sand Blasted, Acid Washed, Powder Coated • Interstate (TM) Deep Cycle Battery • 110V Integrated Trickle Charger • 5 year Dexter Axle Warranty

***Spreader Gate Option Non-compatible on 8' Lengths w/Tandem axle*** 8' has 2.22 cubic yards capacity. 10' has 2.77 cubic yards capacity.

*** MAX GVWR 10,400 with 5200 lb Axle Option and 10,400+ Rated Coupler. *** Bumper Pull Tongue Length (4' 1").


$363.00


D 5 A 0 8 5 1 B S S K D5A0851BSSK 8' x 60" Utility Dump $3,610.00

D5A1051BSSK 10' x 60" Utility Dump $3,809.00


32SS

51SS

52SS

60" Utility Dump (D5) Options


(2) 3,500# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Spring² $1,427.00

51BS * (1) 5,200# (Dexter) Electric / Spring Included (1) 5,200# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Spring² $528.00

52BS (2) 5,200# (Dexter) Electric / Spring $1,121.00 (2) 5,200# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Spring² $2,062.00

Tail Options:

P Tarp kit (Pull Bar) 5 x14ft $149.50 R Ramps $238.05 T Spare Tire and Mount $213.90 V 18" Side Extensions (Expanded Metal) $479.55


32BS (2) 3,500# (Dexter) Electric / Spring $559.00 5 Solar Battery Charger $140.30 6 C M

Upgrade to 235/80 R16 on 52k Axles (Tandem Only) 12"oc Crossmembers Mount Only for Spare Tire

$36.80

18" Side Extensions -DR01 1 Pair D-Rings

$42.55

S* Split Gate Incl. T Split / Spreader Gate $288.00



(763) 434-2277 72" Tandem Axle Dump (D3)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features

Coupler Options: A* BP 2 5/16" A-Frame (12,500lb.) Incl. D BP 2 5/16" Adjustable (14,000 lb.) $132.00 P 3" Pintle Eye - Channel-mount (21,000 lb.) $132.00




• 9,900 lb. G.V.W.R. • 5,200 lb. x 2 G.A.W.R. • 2 5/16" A Frame Coupler • Safety Chains • 1 - Drop Leg Jack (7,000 lb.) • 2 - Dexter E- Z lube Brake Axle (5,200 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 15" White Spoke Wheels • 4 - 225/75R15 Radial Tires ( lb.) • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Treadplate Steel Fenders • Toolbox • Barn Door Gate • 40° Dump Pitch

• 12VDC Hydraulic Pump • 5" x 30" Hyd. Cylinder • 12' Control Cable • 5" Channel Main Frame & Tongue • 16" On Center 3" Channel Crossmembers • 10ga. Steel Bed • 72" Wide Bed • 20" 10ga Steel Sides • DOT Approved Flushmount Lifetime LED Lights • Double Insulated Harness w/Cold Weather Cord 7-way • Sand Blasted, Acid Washed, Powder Coated • Interstate (TM) Deep Cycle Battery • 110V Integrated Trickle Charger • 5 year Dexter Axle Warranty • Mounting Brackets for Roll-up Tarp


$363.00


D 3 A 1 0 5 2 B S S K D3A1052BSSK 10' x 72" Tandem Axle Dump $5,567.00

D3A1252BSSK 12' x 72" Tandem Axle Dump $5,743.00


72" Tandem Axle Dump (D3) Options


(2) 5,200# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Spring² $942.00

Tail Options:

-NTBX No Tarp Mounting Brackets $0.00



S* Split Gate Incl. T Split / Spreader Gate $367.00

-RS01 Rear Support Stands $93.15

52SS

1 Upgrade to 235/80 R16 on 52k Axles $132.25 3 Upgrade to Single 10k Jack (Bumper Pull) $142.60 5 Solar Battery Charger $140.30 C 12"oc Crossmembers $140.30 E Power Up/Down & Gravity Down Upgrade $179.40 M Mount Only for Spare Tire $36.80 P Tarp kit (Pull Bar) 6 x 14ft $207.00 R Ramps w 4 D-Rings $198.95 T Spare Tire and Mount (Bumper Pull) $215.05 -DR01 1 Pair D-Rings $42.55 -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $198.95



(763) 434-2277 83" Low Pro Dump (DL)

D L A 1 2 7 2 B S S K DLA1272BSSK 12' x 83" Low Pro Dump $7,555.00

DLA1472BSSK 14' x 83" Low Pro Dump $7,752.00 DLA1672BSSK 16' x 83" Low Pro Dump $8,256.00

Standard Features

Coupler Options: A* BP 2 5/16" Adjustable (14,000 lb.) Incl. E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,483.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00


R GN 2 5/16" Round (25,000 lb.) $1,104.00 S GN 2 5/16" Square (25,000 lb.) $1,104.00 T BP 2 5/16" Adj. Cplr w/HD 6 hole Chn Brkt (20k) $59.00



$319.00


• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Drop Leg Jack (7,000 lb.) • 2 - Dexter E- Z lube Brake Axle (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • 1/8" Treadplate Steel Fenders • Lockable Toolbox (Houses Battery and Pump) • 2 - Way Gate (Barn Doors & Spread Gate) • 6' 6" Slide In Channel Ramps • 4 - D-Rings (Welded inside the Box) • 40° Dump Pitch • 12VDC Hydraulic Pump • 5"x17" Hyd.Cylinder w/Scissor & 5"x 21" on 16'

• Scissor Lift • 12' Control Cable • Tarp Kit • 8" x 10 lb. I-Beam Frame & Tongue • 3" Channel Crossmembers 16" on Center • 10ga. Steel Bed • 83" Wide Bed • 10ga. Steel Sides • 24" High Sides • DOT Approved Flushmount Lifetime LED Lights • Double Insulated Harness w/Cold Weather Cord 7-way • Stake Pockets • Sand Blasted, Acid Washed, Powder Coated • Interstate (TM) Deep Cycle Battery • Ultra Low 24"- 28" Deck Height • 110V Integrated Trickle Charger • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty

***Triple Axle Options Only on 16'Length*** *** 6x21 Cylinder Included on Triple Axle Options***

Bumper Pull Tongue Length (4' 10"), Gooseneck Length (9' 2"). ***8k axle will raise deck height on this model by 1” *** *** GN coupler options include Spare Tire & Mount***


$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


83" Low Pro Dump (DL) Options





$488.00


(2) 7,000# w/215/75R17.5 LR-H Singles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring $2,713.00

82BS (2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Electric / Spring²

Tail Options:

$1,781.00


72BD (2) 7,000# (Dexter) Electric / Drop Axle $173.00

(2) 7,000# w/215/75R17.5 LR-H Singles (Dexter) Electric / Spring

S* Split / Spreader Gate Incl.

Y2HS

3 Upgrade to Single 10k Jack (Bumper Pull) $0.00 5 Solar Battery Charger $140.30 6 6" Taller GN Riser $165.60 8 Full Size Divided Toolbox Upgrade (BP Only) $89.70 9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $140.30 E Power Up/Down & Gravity Down Upgrade $179.40 H HD 24" Side Extensions 10ga $1,176.45 M Mount Only for Spare Tire $0.00 T Spare Tire and Mount (Bumper Pull) $177.10 V 24" Side Extensions (Expanded Metal) $683.10 X Bulldog 2-speed Jacks (12,000 lb.) $204.70 Y 24" Side Extensions (Solid) $609.50 -BTRY 1 Extra Battery $242.65 -DON1 Removable Deck on the Neck (102" Wide 96" Long) $778.55 -DR01 1 Pair D-Rings $42.55 -FR01 Fork Rack $285.20 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $747.50 -RS01 Rear Support Stands $93.15 -SP02 Spare Tire & Mount (Bumper Pull) G Rated $250.70 -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $428.95 -SW07 7 Gauge Solid Metal Sides & Floor $331.20 -TB03 Top Riser Toolbox $500.25


14' x 83” Low Pro Telescopic Dump $8,039.00

D T A 1 2 7 2 B S S K


(763) 434-2277 83” Low Pro Telescopic Dump (DT)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features

Coupler Options: A* BP 2 5/16" Adjustable (14,000 lb.) Incl. P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 T BP 2 5/16" Adj. Cplr w/HD 6 hole Chn Brkt (20k) $59.00




• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Drop Leg Jack (7,000 lb.) • 2 - Dexter E- Z lube Brake Axle (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • 1/8" Treadplate Steel Fenders • Lockable Toolbox (Houses Battery and Pump) • 2 - Way Gate (Barn Doors & Spread Gate) • 6' 6" Slide In Channel Ramps • 4 - D-Rings • 40° Dump Pitch • Power Up/Gravity Down • Telescopic Cylinder • 12' Control Cable

• Tarp Kit • 8" x 13 lb. I-Beam Frame & Tongue • 10ga. Fabricated Bed Frame • 3" Channel Crossmembers 16" on Center • 2" x 6" x 11ga. Tubing Outer Bed Frame • 10ga. Steel Bed • 83" Wide Bed • 10ga. Steel Sides • 24" High Sides • DOT Approved Flushmount Lifetime LED Lights • Double Insulated Harness w/Cold Weather Cord 7-way • Sand Blasted, Acid Washed, Powder Coated • Interstate (TM) Deep Cycle Battery • Stake Pockets • 110V Integrated Trickle Charger • Ultra Low 24"- 28" Deck Height • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty


$363.00



(2) 7,000# w/215/75R17.5 LR-H Singles (Dexter) Electric / Spring M Mount Only for Spare Tire $0.00

Power Up/Down & Gravity Down Upgrade

6 9

6" Taller GN Riser 9,990 G.V.W.R.

83” Low Pro Telescopic Dump (DT) Options


72BD (2) 7,000# (Dexter) Electric / Drop Axle $173.00 3 Upgrade to Single 10k Jack (Bumper Pull) $0.00 72BS * (2) 7,000# (Dexter) Electric / Spring Included 5 Solar Battery Charger $140.30



$488.00


Y2HS (2) 7,000# w/215/75R17.5 LR-H Singles (Dexter)

Elec/Hyd Disc (1,600 PSI Pump) / Spring $2,713.00

T Spare Tire and Mount (Bumper Pull) $177.10 X Bulldog 2-speed Jacks (12,000 lb.) $204.70

82BS (2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) $1,781.00 Electric / Spring² -DR01 1 Pair D-Rings $42.55

(2) 8,000# Oil Bath w/215/ 75R17.5 LR-H -TB03 Top Riser Toolbox $500.25

K2BS Singles(Dexter) Electric / Spring²

$2,543.00 Notes: ² Special Order Option: Requires additional confirmation lead-time.

Tail Options:


C 12"oc Crossmembers



(763) 434-2277

83" Low Pro High Side Dump (DM)

D M A 1 2 7 2 B S S K DMA1272BSSK 12' x 83" Low Pro High Side Dump $8,278.00

DMA1472BSSK 14' x 83" Low Pro High Side Dump $8,476.00 DMA1672BSSK 16' x 83" Low Pro High Side Dump $9,135.00

Standard Features

Coupler Options: A* BP 2 5/16" Adjustable (14,000 lb.) Incl. E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,483.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00


R GN 2 5/16" Round (25,000 lb.) $1,104.00 S GN 2 5/16" Square (25,000 lb.) $1,104.00 T BP 2 5/16" Adj. Cplr w/HD 6 hole Chn Brkt (20k) $59.00



$319.00


• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Drop Leg Jack (7,000 lb.) • 2 - Dexter E- Z lube Brake Axle (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • 1/8" Treadplate Steel Fenders • Lockable Toolbox (Houses Battery and Pump) • 2 - Way Gate (Barn Doors & Spread Gate) • 6' 6" Slide In Channel Ramps • 4 - D-Rings (Welded inside the Box) • 40° Dump Pitch • 12VDC Hydraulic Pump • 5"x17" Hyd.Cylinder w/Scissor & 5"x 21" on 16'

• Scissor Lift • 12' Control Cable • Tarp Kit • 8" x 10 lb. I-Beam Frame & Tongue • 3" Channel Crossmembers 16" on Center • 10ga. Steel Bed • 83" Wide Bed • 10ga. Steel Sides • 48" High Sides • DOT Approved Flushmount Lifetime LED Lights • Double Insulated Harness w/Cold Weather Cord 7-way • Stake Pockets • Sand Blasted, Acid Washed, Powder Coated • Interstate (TM) Deep Cycle Battery • Ultra Low 24"- 28" Deck Height • 110V Integrated Trickle Charger • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty

***Triple Axle Options Only on 16'Length*** *** 6x21 Cylinder Included on Triple Axle Options***

*** MAX GVWR 16,000 with 8k Axle Option and 16k+ Rated Coupler. *** Bumper Pull Tongue Length (4' 10"), Gooseneck Length (9' 2").

***8k axle will raise deck height on this model by 1” *** *** GN coupler options include Spare Tire & Mount***


$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


83" Low Pro High Side Dump (DM) Options


72BD (2) 7,000# (Dexter) Electric / Drop Axle $173.00 3 Upgrade to Single 10k Jack (Bumper Pull) $0.00 72BS * (2) 7,000# (Dexter) Electric / Spring Included 5 Solar Battery Charger $140.30

72HS. (2) 7,000# (Dexter) $1,632.00 6 6" Taller GN Riser $165.60

Elec/Hyd Disc (1,600 PSI Pump) / Spring² 8 Full Size Divided Toolbox Upgrade (BP Only) $89.70

92BD (2) 7,000# w/14 Ply LR-G Tires (Dexter)

Electric / Drop Axle $488.00

9 9,990 G.V.W.R. $0.00

C 12"oc Crossmembers $140.30

(2) 7,000# w/14 Ply LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $1,950.00

Y2BS (2) 7,000# w/215/75R17.5 LR-H Singles (Dexter) Electric / Spring

Y2HS (2) 7,000# w/215/75R17.5 LR-H Singles (Dexter)

$1,080.00


Elec/Hyd Disc (1,600 PSI Pump) / Spring $2,713.00 Y 24" Side Extensions (Solid) $609.50

82BS (2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Electric / Spring² (2) 8,000# Oil Bath w/215/75R17.5 LR-H

$1,781.00

-BTRY 1 Extra Battery $242.65 -DR01 1 Pair D-Rings $42.55

K2BS Singles(Dexter) Electric / Spring²

$2,543.00

Tail Options:

-JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $198.95

-JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks (GN Only)

$110.40

-SW03 3ft Tall Sides -$230.00


E Power Up/Down & Gravity Down Upgrade $179.40

-RS01 Rear Support Stands $93.15


(2) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Spring

H M T

HD 24" Side Extensions 10ga Mount Only for Spare Tire Spare Tire and Mount (Bumper Pull)


92HS

-FR01 Fork Rack $285.20 -JA01 HD 25k Jost 2x Jacks $614.10 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $747.50 -JA06 2 Hydraulic Monster Jacks™ $1,148.85


16' HD Low-Pro Dump $11,730.00

D E B 1 6 S 2 B T S K


(763) 434-2277 HD Low-Pro Dump (DE)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features

Coupler Options: R GN 2 5/16" Round (25,000 lb.) $0.00


Powder Coat Color Options: Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00 Primer + Black (Texas) (0) $126.00 Primer + Red (Texas) (1) Red (r) $273.00


• 20,000 lb. G.V.W.R. • 10,000 lb. x 2 G.A.W.R. • Adj. Rigid 2 5/16" Ball Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter Oil Bath Axles (10,000 lb.) • Torsion Suspension • 4 - 17.5" Grey Wheels • 235/75/R17.5 LR-J 8-hole SINGLE • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • 1/8" Treadplate Steel Fenders • Lockable Toolbox (Houses Battery and Pump) • 2 - Way Gate (Barn Doors & Spread Gate) • 6' 6" Slide In Channel Ramps • 4 - D-Rings (Welded inside the Box) • 40° Dump Pitch • 12VDC Hydraulic Pump • 6" x 21" Hyd. Cylinder w/Scissor Lift

• Scissor Lift • 12' Control Cable • Tarp Kit • 10" x 19 lb. I-Beam Main Frame & Tongue • 3" Channel Crossmembers 16" on Center • 7ga. Steel Bed • 83" Wide Bed • 7ga. Steel Sides • 36" High Sides • DOT Approved Flushmount Lifetime LED Lights • Double Insulated Harness w/Cold Weather Cord 7-way • Stake Pockets • Sand Blasted, Acid Washed, Powder Coated • Interstate (TM) Deep Cycle Battery • 110V Integrated Trickle Charger • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 10 year Dexter Axle Warranty • Spare Tire & Mount


$311.00



HD Low-Pro Dump (DE) Options


Tail Options:

S2BT * (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) Electric / Torsion


4 Plate for Winch $133.40 5 Solar Battery Charger $119.60 6 6" Taller GN Riser $141.45 C 12"oc Crossmembers $119.60 E Power Up/Down & Gravity Down Upgrade $152.95 H HD 24" Side Extensions 10ga $1,005.10 V 24" Side Extensions (Expanded Metal) $584.20 X Bulldog 2-speed Jacks (12,000 lb.) $174.80 Y 24" Side Extensions (Solid) $520.95 -BTRY 1 Extra Battery $207.00 -DON1 Removable Deck on the Neck (102" Wide 96" Long) $690.00 -DR01 1 Pair D-Rings $36.80 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $747.50 -JA06 2 Hydraulic Monster Jacks™ Includes Front Toolbox $1,148.85 -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $169.05 -JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks (GN

Only) $94.30

-RM30 No Ramps No Ramp Pockets -$109.25 -RS01 Rear Support Stands $79.35 -RS12 12" Taller GN Riser $281.75 -TB03 Top Riser Toolbox $431.25



(763) 434-2277 96" Deckover Dump (D8)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features

Coupler Options: A* BP 2 5/16" Adjustable (14,000 lb.) Incl. H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,341.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00


R GN 2 5/16" Round (25,000 lb.) $1,104.00 S GN 2 5/16" Square (25,000 lb.) $1,104.00



$319.00


• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Coupler • Safety Chains • 1 - Drop Leg Jack (7,000 lb.) • 2 - Dexter E- Z lube Brake Axle (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Lockable Toolbox (Houses Battery and Pump) • 2 - Way Gate (Barn Doors & Spread Gate) • 80" Slide In Channel Ramps • 4 - D-Rings • 40° Dump Pitch • 12VDC Hydraulic Pump • 5" x 17" Hyd. Cylinder w/Scissor Lift

• 12' Control Cable • 8" I-Beam Main Frame & Tongue • Mounting Brackets for Roll-up Tarp • 11ga. Fabricated Bed Frame • 3" Channel Crossmembers 16" on Center • 2" x 6" x 11ga. Tubing Outer Bed Frame • 10ga. Steel Bed • 96" Wide Bed • 12ga. Steel Sides • 19" High Fold Down Sides • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • Interstate (TM) Deep Cycle Battery • 110V Integrated Trickle Charger • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty

***Must be 16' for triple axle options*** 14' has 6.22 cubic yards capacity.

*** MAX GVWR 16,000 with 8k Axle Option and 16k+ Rated Coupler. *** Bumper Pull Tongue Length (4' 4").



$363.00

D 8 A 1 4 7 2 B S S K D8A1472BSSK 14' x 96" Deckover Dump $8,068.00

D8A1672BSSK 16' x 96" Deckover Dump $8,339.00


6 9

6" Taller GN Riser 9,990 G.V.W.R.

96" Deckover Dump (D8) Options

Axle Options:

Other Options: 72BS * (2) 7,000# (Dexter) Electric / Spring Included 3 Upgrade to Single 10k Jack (Bumper Pull) $142.60 73BS (3) 7,000# (Dexter) Electric / Spring $1,062.00 5 Solar Battery Charger $140.30

92BS (2) 7,000# w/14 Ply LR-G Tires (Dexter) Electric / Spring


$315.00


(3) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Electric / Spring $3,734.00 (2) 8,000# Oil Bath w/215/75R17.5 LR-H

K2BS Singles(Dexter) Electric / Spring

$2,543.00

Tail Options: -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $747.50 -LT10 Light Bar w/4 Lights (GN Only) $357.65 -TB03 Top Riser Toolbox $500.25

(2) 8,000# Oil Bath w/14 Ply LR-G Tires (Dexter) Electric / Spring M Mount Only for Spare Tire (Under Frame) $36.80

Power Up/Down & Gravity Down Upgrade

C 12"oc Crossmembers



83BS P Tarp kit (Pull Bar) 8 x 18ft $295.55 T Spare Tire and Mount (Bumper Pull) (Under

Frame) $230.00




(763) 434-2277 Tandem Dual Dump (DD)

D D R 1 6 A 2 B S S K DDR16A2BSSK 16' Tandem Dual Dump $15,577.00

DDR18A2BSSK 18' Tandem Dual Dump $15,896.00 DDR20A2BSSK 20' Tandem Dual Dump $16,215.00

Standard Features

Coupler Options: R* GN 2 5/16" Round (25,000 lb.) Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) w/Tbx $0.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $379.00


H GN 2 5/16" Round (30,000 lb.) $237.00 P 3" Pintle Eye - Face-mount (36,000 lb.) w/Tbx $0.00 Q GN 2 5/16" Square (30,000 lb.) $237.00 S GN 2 5/16" Square (25,000 lb.) $0.00



$319.00


• 25,000 lb. G.V.W.R. • 10,000 lb. x 2 G.A.W.R. • GN 2 5/16" Ball Bulldog Coupler 25,000 lb • Safety Chains • 2 - Drop Leg Jacks (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (10,000 lb.) • 5 Leaf Slipper Spring Suspension • 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern • 8 - 16" 235/80R16 Radial Tires (3,090 lb) • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Ladder on Right Side • Lockable Front Toolbox w/ Chain Holder • 2 - Way Gate (Barn Doors & Spread Gate) • 70" Ramps w/ Holders • 4 Flushmount D-Rings • 45° Dump Pitch

• 12VDC Hydraulic Pump • 10 Ton Scissor Lift • 12" x 19 lb. I-Beam Main Frame, Riser & Neck • 2 x 6 x 1/8" Square Tubing Outer Deck Frame • 3" Channel Crossmembers 16 • 10ga. Steel Bed • 96" Wide Bed • 12ga. Steel Sides • 36" High Removable Sides • DOT Approved Flushmount Lifetime LED Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • Interstate (TM) Deep Cycle Battery • 110V Integrated Trickle Charger • Dual 5" x 25½" Hyd. Cylinder w/Hoist • 5 year Dexter Axle Warranty • Spare Tire & Mount

16' has 14.22 cubic yards capacity. 18' has 16.00 cubic yards capacity. 20' has 17.78 cubic yards capacity.

*** MAX GVWR 28,000 with 12k Axle Option and 28k+ Rated Coupler. *** Gooseneck Length (9' 1").


$363.00

1 2 3 4 5 6 7 8 9 10 11 Other


Tandem Dual Dump (DD) Options

Axle Options:

Other Options: A2BS * (2) 10,000# Axles (Dexter) Electric / Spring Included 5 Solar Battery Charger $140.30

T2BS (2) 10,000# w/14 Ply LR-G Dual T&W(Dexter)


6 6" Taller GN Riser $165.60 9 Under Frame Tie Down Flat $3.16 / ft B 4ft Removable Sides $535.90


(2) 12,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring $3,683.00

C 12"oc Crossmembers $205.85 E Power Up/Down & Gravity Down Upgrade $179.40

S* Split / Spreader Gate Incl. N 22 lb. I-Beam Main Frame, Riser & Neck $19.84 / ft B Barn Doors $0.00 P Tarp Kit 100" (Uninstalled) $917.70


Z Grain Chute $328.90


(2) 12,000# w/14 Ply LR-G Dual T&W (Dexter)

C2HS

Electric / Spring

H 6ft Removable Sides $1,606.55

Tail Options:



(763) 434-2277 60" Sngl Axle Channel Utility (U6)

U 6 2 0 8 3 1 D S S K U620831DSSK 8' x 60" Sngl Axle Channel Utility $1,381.00

U621031DSSK 10' x 60" Sngl Axle Channel Utility $1,430.00 U621231DSSK 12' x 60" Sngl Axle Channel Utility $1,478.00 U621431DSSK 14' x 60" Sngl Axle Channel Utility $1,527.00

Standard Features

Coupler Options: 2* BP 2" A-Frame Incl. A BP 2 5/16" A-Frame $36.00 J BP 2 5/16" Adjustable $119.00


P 3" Pintle Eye - Channel-mount $119.00



$71.00

• 2,990 lb. G.V.W.R. • 3,500 lb. x 1 G.A.W.R. • 2" Ball Demco EZ Latch Coupler • Safety Chains • 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.) • 1 - Dexter E- Z lube Idler Axle (3,500 lb.) • 4 Leaf Double-eye Spring Suspension • 2 - NEW 15" White Spoke Wheels • 2 - ST205/75R15 Radial Tires (1,820 lb) • Stake Pockets • 9" x 33" Treadplate Removable Alum Fenders

• 4" Channel Frame & Tongue • 2 1/2" x 2 1/2" x 3/16" Angle Crossmembers • 2" x 2" Removable Side Rail • 2" x 2" Top Rail • 2" Treated Pine Lumber Deck • 60" Wide Deck • Flushmount 6” Oval Lifetime LED Tail Lights • Sealed Wire Harness • Sand Blasted, Acid Washed, Powder Coated • 5 year Dexter Axle Warranty

Bumper Pull Tongue Length (3' 4").

1 2 3 4 5 6 7 8 9 10 11 Other


60" Sngl Axle Channel Utility (U6) Options


31DS * (1) 3,500# (Dexter) Idler / Spring Included 2 2ft Expanded Metal Sides $32.70 / ft 31ES (1) 3,500# (Dexter) Electric / Spring $194.00 3 Upgrade to 225/75 R15 on 3.5k Axles $99.60 51DS (1) 5,200# (Dexter) Idler / Spring $285.00 4 4ft Expanded Metal Sides $45.00 / ft 51ES (1) 5,200# (Dexter) Electric / Spring $480.00 5 Regular Sides w/Solid Metal $16.80 / ft

6 Regular Sides w/Expanded Metal $16.80 / ft Tail Options: 7 Upgrade to 7k Jack $99.60 S* Straight Deck Incl. 8 2 Stake Pockets In Front of Trailer $13.20 B Dovetail w/ 4' Fold-up Gate $247.00 A Side Mount ATV Ramps (12ft or Longer) $106.80 F Straight Deck with Fold In Gate $193.00 C Landscape Toolbox (Must Have Siderails) $306.00 G Straight Deck w/ 4' Fold-up Gate $193.00 F Steel Diamond Plate Fenders $0.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $325.00 G 4ft Side Gate (14ft or longer) $193.20 J Dovetail w/ 4' Heavy Duty Fold-up Gate $378.00 J LED Light Upgrade Clearance/Marker $50.40 K Straight Deck w/ Bi-Fold Gate $284.00 M Expanded Metal Floor $17.40 / ft M Dovetail w/ Bi-Fold Gate $337.00 P 2" Pipetop Removable Siderails $110.40 R Straight Deck w/ 5' Slide-in Ramps $222.00 Q Rubrail $5.70 / ft

S 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 16"oc $32.70 / ft

T Mount Only for Spare Tire $38.40 U Rear Trailer Support Jacks $118.80 V Spare Tire and Mount $146.40 W 12" oc Crossmembers $103.20 X 16"oc Crossmembers $44.40 Z 22" Solid Metal Sides w/ 2" pipe-top $32.70 / ft -BWPF Blackwood Pro Full Deck $34.20 / ft -BWPO Blackwood Pro Outer Deck $21.90 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $44.40 -DR01 1 Pair D-Rings $44.40 -GT10 Ramp Gate Transition Lip $75.60 -TB01 Front Toolbox (Includes 7k jack upgrade) $290.40 -TD01 1 Set of Cargo Tie Down (2) Loops $13.20 -TW05 Upgrade to 235/80 R16 on 5.2 Axles $138.00



(763) 434-2277 60" Tndm Axle Channel Utility (UC)

U C 2 1 0 3 2 C S S K UC21032CSSK 10' x 60" Tndm Axle Channel Utility $2,257.00

UC21232CSSK 12' x 60" Tndm Axle Channel Utility $2,306.00 UC21432CSSK 14' x 60" Tndm Axle Channel Utility $2,354.00 UC21632CSSK 16' x 60" Tndm Axle Channel Utility $2,403.00

Standard Features






$71.00

• 7,000 lb. G.V.W.R. • 3,500. x 2 G.A.W.R. • 2" Ball Demco EZ Latch Coupler • Safety Chains • 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.) • (2) 3,500# (Dexter) One Electric (Spring) • 4 Leaf Double-eye Spring Suspension • 4 - NEW 15" White Spoke Wheels • 4 - ST205/75R15 Radial Tires (1,820 lb) • Stake Pockets • 9" x 33" Treadplate Removable Alum Fenders

• 4" Channel Frame & Tongue • 2 1/2" x 2 1/2" x 3/16" Angle Crossmembers • 2" x 2" Removable Side Rail • 2" x 2" Top Rail • 2" Treated Pine Lumber Deck • 60" Wide Deck • Flushmount 6” Oval Lifetime LED Tail Lights • All-Weather Wiring Harness (7-way RV) • Sand Blasted, Acid Washed, Powder Coated • 5 year Dexter Axle Warranty

*** 5,200 lb axles come with 16'. *** ***Dovetail Option - 14’ And Shorter Get a 16” Dove And 16’ And Longer Get a 2’ Dove***


1 2 3 4 5 6 7 8 9 10 11 Other


60" Tndm Axle Channel Utility (UC) Options


32CS * (2) 3,500# (Dexter) One Electric / Spring Included 2 2ft Expanded Metal Sides $32.70 / ft 32DS (2) 3,500# (Dexter) Idler / Spring ($172.00) 3 Upgrade to 225/75 R15 on 3.5k Axles $99.60 32ES (2) 3,500# (Dexter) Electric / Spring $197.00 4 4ft Expanded Metal Sides $45.00 / ft 52CS (2) 5,200# (Dexter) One Electric / Spring $439.00 5 Regular Sides w/Solid Metal $16.80 / ft 52ES (2) 5,200# (Dexter) Electric / Spring $684.00 6 Regular Sides w/Expanded Metal $16.80 / ft

7 Upgrade to 7k Jack $99.60 Tail Options: 8 2 Stake Pockets In Front of Trailer $13.20 S* Straight Deck Incl. A Side Mount ATV Ramps (12ft or Longer) $106.80 B Dovetail w/ 4' Fold-up Gate $247.00 C Landscape Toolbox (Must Have Siderails) $306.00 F Straight Deck with Fold In Gate $193.00 F Steel Diamond Plate Fenders $0.00 G Straight Deck w/ 4' Fold-up Gate $193.00 G 4ft Side Gate (14ft or longer) $193.20 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $325.00 J LED Light Upgrade Clearance/Marker $50.40 J Dovetail w/ 4' Heavy Duty Fold-up Gate $378.00 M Expanded Metal Floor $17.40 / ft K Straight Deck w/ Bi-Fold Gate $284.00 P 2" Pipetop Removable Siderails $110.40 M Dovetail w/ Bi-Fold Gate $337.00 Q Rubrail $5.70 / ft R Straight Deck w/ 5' Slide-in Ramps $222.00 S 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 16"oc $32.70 / ft Y Dovetail w/ 3' Fold-up Gate $247.00 T Mount Only for Spare Tire $38.40

U Rear Trailer Support Jacks $118.80 V Spare Tire and Mount $146.40 W 12" oc Crossmembers $103.20 X 16"oc Crossmembers $44.40 Z 22" Solid Metal Sides w/ 2" pipe-top $32.70 / ft -BWPF Blackwood Pro Full Deck $34.20 / ft -BWPO Blackwood Pro Outer Deck $21.90 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $43.20 -DR01 1 Pair D-Rings $44.40 -GT10 Ramp Gate Transition Lip $75.60 -TB01 Front Toolbox (Includes 7k jack upgrade) $290.40 -TD01 1 Set of Cargo Tie Down (2) Loops $13.20 -TD05 5 Sets of Cargo Tie Down (10) Loops $75.60



(763) 434-2277 77" Tndm Axle Channel Utility (UK)

U K 2 0 8 3 2 C S S K UK21032CSSK 10' x 77" Tndm Axle Channel Utility $2,291.00

UK21232CSSK 12' x 77" Tndm Axle Channel Utility $2,348.00 UK21432CSSK 14' x 77" Tndm Axle Channel Utility $2,405.00 UK21632CSSK 16' x 77" Tndm Axle Channel Utility $2,462.00 UK21832CSSK 18' x 77" Tndm Axle Channel Utility $2,521.00 UK22032CSSK 20' x 77" Tndm Axle Channel Utility $2,578.00 UK22232CSSK 22' x 77" Tndm Axle Channel Utility $2,635.00

Standard Features






$71.00

• 7,000 G.V.W.R. • 3,500 x 2 G.A.W.R. • 2" Ball Demco EZ Latch Coupler • Safety Chains • 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.) • (2) 3,500# (Dexter) One Electric (Spring) • 4 Leaf Double-eye Spring Suspension • 4 - NEW 15" White Spoke Wheels • 4 - ST205/75R15 Radial Tires (1,820 lb) • Stake Pockets • 9" x 33" Treadplate Removable Alum Fenders


*** 5,200 lb axles come with 16" on center cross members. *** Bumper Pull Tongue Length (3' 5").

***Dovetail Option - 14’ And Shorter Get a 16” Dove And 16’ And Longer Get a 2’ Dove*** ***Rear support jacks standard on 16' or longer w/5200# axles or larger and also including ramps without support legs. Support legs only come standard on


1 2 3 4 5 6 7 8 9 10 11 Other


77" Tndm Axle Channel Utility (UK) Options



7 Upgrade to 7k Jack $99.60 Tail Options: 8 2 Stake Pockets In Front of Trailer $13.20 S* Straight Deck Incl. A Side Mount ATV Ramps (12ft or Longer) $106.80 B Dovetail w/ 4' Fold-up Gate $247.00 C Landscape Toolbox (Must Have Siderails) $306.00 F Straight Deck with Fold In Gate $209.00 F Steel Diamond Plate Fenders $0.00 G Straight Deck w/ 4' Fold-up Gate $209.00 G 4ft Side Gate (14ft or longer) $193.20 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $338.00 J LED Light Upgrade Clearance/Marker $50.40 J Dovetail w/ 4' Heavy Duty Fold-up Gate $392.00 M Expanded Metal Floor $17.40 / ft K Straight Deck w/ Bi-Fold Gate $298.00 P 2" Pipetop Removable Siderails $110.40 M Dovetail w/ Bi-Fold Gate $352.00 Q Rubrail $5.70 / ft Q Straight Deck w/ Split Heavy Duty Gate $443.00 S Steel Floor w/ 4 D-Rings & 16"oc $32.70 / ft R Straight Deck w/ 5' Slide-in Ramps $222.00 T Mount Only for Spare Tire $38.40 X Dovetail w/ Split Heavy Duty Gate $481.00 U Rear Trailer Support Jacks $118.80 Y Dovetail w/ 3' Fold-up Gate $247.00 V Spare Tire and Mount $146.40

W 12" oc Crossmembers $103.20 X 16" oc Crossmembers $44.40 Z 22" Solid Metal Sides w/ 2" Pipe Top $32.70 / ft -BWPF Blackwood Pro Full Deck $34.20 / ft -BWPO Blackwood Pro Outer Deck $21.90 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $44.40 -DR01 1 Pair D-Rings $44.40 -GT10 Ramp Gate Transition Lip $75.60 -TB01 Front Toolbox (Includes 7k jack upgrade) $290.40 -TD01 1 Set of Cargo Tie Down (2) Loops $13.20 -TD05 5 Sets of Cargo Tie Down (10) Loops $74.40






Standard Features






$71.00

• 2,990 G.V.W.R. • 3,500 x 1 G.A.W.R. • 2" Ball Demco EZ Latch Coupler • Safety Chains • 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.) • 1 - Dexter E- Z lube Idler Axle (3,500 lb.) • 4 Leaf Double-eye Spring Suspension • 2 - NEW 15" White Spoke Wheels • 2 - ST205/75R15 Radial Tires (1,820 lb) • Stake Pockets • 9" x 33" Treadplate Removable Alum Fenders



1 2 3 4 5 6 7 8 9 10 11 Other





6 Regular Sides w/Expanded Metal $16.80 / ft Tail Options: 7 Upgrade to 7k Jack $99.60 S* Straight Deck Incl. 8 2 Stake Pockets In Front of Trailer $13.20 B Dovetail w/ 4' Fold-up Gate $247.00 A Side Mount ATV Ramps (12ft or Longer) $106.80 F Straight Deck with Fold In Gate $209.00 B 4ft Solid Metal Sides $45.00 / ft G Straight Deck w/ 4' Fold-up Gate $209.00 C Landscape Toolbox (Must Have Siderails) $306.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $338.00 F Steel Diamond Plate Fenders $0.00 J Dovetail w/ 4' Heavy Duty Fold-up Gate $392.00 G 4ft Side Gate (14ft or longer) $193.20 K Straight Deck w/ Bi-Fold Gate $298.00 J LED Light Upgrade Clearance/Marker $50.40 M Dovetail w/ Bi-Fold Gate $352.00 M Expanded Metal Floor $17.40 / ft R Straight Deck w/ 5' Slide-in Ramps $222.00 P 2" Pipetop Removable Siderails $110.40 X Dovetail w/ Split Heavy Duty Gate $481.00 Q Rubrail $5.70 / ft

S Steel Floor w/ 4 D-Rings & 16"oc $32.70 / ft T Mount Only for Spare Tire $38.40 U Rear Trailer Support Jacks $118.80 V Spare Tire and Mount $146.40 W 12" oc Crossmembers $103.20 X 16" oc Crossmembers $44.40 Z 22" Solid Metal Sides w/ 2" Pipe Top $32.70 / ft -BWPF Blackwood Pro Full Deck $34.20 / ft -BWPO Blackwood Pro Outer Deck $21.90 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $44.40 -DR01 1 Pair D-Rings $44.40 -GT10 Ramp Gate Transition Lip $75.60 -TB01 Front Toolbox (Includes 7k jack upgrade) $290.40 -TD01 1 Set of Cargo Tie Down (2) Loops $13.20 -TW05 Upgrade to 235/80 R16 on 5.2 Axles $138.00 -WP01 Plate for Winch $162.00






Standard Features

Coupler Options: 2* BP 2" A-Frame Incl. A BP 2 5/16" A-Frame $36.00 J BP 2 5/16" Adjustable $119.00 P 3" Pintle Eye - Channel-mount $119.00

Powder Coat Color Options: Black (k) * Incl. No Paint (z) $0.00 Desert Tan (t) Grey (g)



$71.00

• 2,990 G.V.W.R. • 3,500 x 1 G.A.W.R. • 2" Ball Demco EZ Latch Coupler • Safety Chains • 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.) • 1 - Dexter E- Z lube Idler Axle (3,500 lb.) • 4 Leaf Double-eye Spring Suspension • 2 - NEW 15" White Spoke Wheels • 2 - ST205/75R15 Radial Tires (1,820 lb) • Stake Pockets • 9" x 33" Treadplate Removable Alum Fenders



1 2 3 4 5 6 7 8 9 10 11 Other





6 Regular Sides w/Expanded Metal $16.80 / ft Tail Options: 7 Upgrade to 7k Jack $99.60 S* Straight Deck Incl. A Side Mount ATV Ramps (12ft or Longer) $106.80 B Dovetail w/ 4' Fold-up Gate $247.00 B 4ft Solid Metal Sides $45.00 / ft F Straight Deck with Fold In Gate $224.00 C Landscape Toolbox (Must Have Siderails) $306.00 G Straight Deck w/ 4' Fold-up Gate $224.00 F Steel Diamond Plate Fenders $0.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $353.00 G 4ft Side Gate (14ft or longer) $193.20 J Dovetail w/ 4' Heavy Duty Fold-up Gate $406.00 J LED Light Upgrade Clearance/Marker $50.40 K Straight Deck w/ Bi-Fold Gate $311.00 M Expanded Metal Floor $17.40 / ft M Dovetail w/ Bi-Fold Gate $367.00 P 2" Pipetop Removable Siderails $110.40 R Straight Deck w/ 5' Slide-in Ramps $222.00 S 11ga DP Steel Floor w/4 D-Rings & 16"oc $32.70 / ft X Dovetail w/ Split Heavy Duty Gate $496.00 T Spare Tire Mount $38.40

U Rear Trailer Support Jacks $118.80 V Spare Tire and Mount $146.40 W 12" oc Crossmembers $103.20 X 16"oc Crossmembers $44.40 Z 22" Solid Metal Sides w/ 2" pipe-top $32.70 / ft -BWPF Blackwood Pro Full Deck $34.20 / ft -BWPO Blackwood Pro Outer Deck $21.90 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $44.40 -DR01 1 Pair D-Rings $44.40 -GT10 Ramp Gate Transition Lip $75.60 -TB01 Front Toolbox (Includes 7k jack upgrade) $290.40 -TD01 1 Set of Cargo Tie Down (2) Loops $13.20 -TW05 Upgrade to 235/80 R16 on 5.2 Axles $138.00



(763) 434-2277 83" Tndm Axle Channel Utility (UL)

U L 2 1 0 3 2 C S S K UL21032CSSK 10' x 83" Tndm Axle Channel Utility $2,304.00

UL21232CSSK 12' x 83" Tndm Axle Channel Utility $2,361.00 UL21432CSSK 14' x 83" Tndm Axle Channel Utility $2,418.00 UL21632CSSK 16' x 83" Tndm Axle Channel Utility $2,476.00 UL21832CSSK 18' x 83" Tndm Axle Channel Utility $2,533.00 UL22032CSSK 20' x 83" Tndm Axle Channel Utility $2,590.00 UL22232CSSK 22' x 83" Tndm Axle Channel Utility $2,647.00

Standard Features






$71.00

• 7,000 G.V.W.R. • 3,500 x 2 G.A.W.R. • 2" Ball Demco EZ Latch Coupler • Safety Chains • 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.) • (2) 3,500# (Dexter) One Electric (Spring) • 4 Leaf Double-eye Spring Suspension • 4 - NEW 15" White Spoke Wheels • 4 - ST205/75R15 Radial Tires (1,820 lb) • Stake Pockets • 9" x 33" Treadplate Removable Alum Fenders


*** 5,200 lb axles come with 16" on center cross members. *** Bumper Pull Tongue Length (3' 7").

***Dovetail Option - 14’ And Shorter Get a 16” Dove And 16’ And Longer Get a 2’ Dove*** ***Rear support jacks standard on 16' or longer w/5200# axles or larger and also including ramps without support legs. Support legs only come standard on


1 2 3 4 5 6 7 8 9 10 11 Other


83" Tndm Axle Channel Utility (UL) Options



7 Upgrade to 7k Jack $99.60 Tail Options: 8 2 Stake Pockets In Front of Trailer $13.20 S* Straight Deck Incl. A Side Mount ATV Ramps (12ft or Longer) $106.80 B Dovetail w/ 4' Fold-up Gate $247.00 C Landscape Toolbox (Must Have Siderails) $306.00 F Straight Deck with Fold In Gate $224.00 F Steel Diamond Plate Fenders $0.00 G Straight Deck w/ 4' Fold-up Gate $224.00 G 4ft Side Gate (14ft or longer) $193.20 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $353.00 J LED Light Upgrade Clearance/Marker $50.40 J Dovetail w/ 4' Heavy Duty Fold-up Gate $406.00 M Expanded Metal Floor $17.40 / ft K Straight Deck w/ Bi-Fold Gate $311.00 P 2" Pipetop Removable Siderails $110.40 M Dovetail w/ Bi-Fold Gate $367.00 Q Rubrail $5.70 / ft Q Straight Deck w/ Split Heavy Duty Gate $443.00 S 11ga DP Steel Floor w/4 D-Rings & 16"oc $32.70 / ft R Straight Deck w/ 5' Slide-in Ramps $222.00 T Spare Tire Mount $38.40 W Straight Deck w/ 3' Fold-up Gate $194.00 U Rear Trailer Support Jacks $118.80 X Dovetail w/ Split Heavy Duty Gate $496.00 V Spare Tire and Mount $146.40 Y Dovetail w/ 3' Fold-up Gate $247.00 W 12" oc Crossmembers $103.20

X 16"oc Crossmembers $44.40

Z 22" Solid Metal Sides w/ 2" pipe-top $32.70 / ft -BWPF Blackwood Pro Full Deck $34.20 / ft -BWPO Blackwood Pro Outer Deck $21.90 / ft -DR01 1 Pair D-Rings $44.40 -GT10 Ramp Gate Transition Lip $75.60 -TB01 Front Toolbox (Includes 7k jack upgrade) $290.40

-TD01 1 Set of Cargo Tie Down (2) Loops $13.20 -TD05 5 Sets of Cargo Tie Down (10) Loops $74.40

PRODUCT SPECIFICATION GUIDE

Product Code

Trailer Model

Deck Length Deck

Height Deck

Width* Width Inside

Fenders No. of Axles

Axle Sizes (lbs)

Std. Tire Size

A6 60” All Steel Utility 8’ & 10’ 21” 60” 60” 1 3500 205/75/R15 B5 5” Channel Buggy Hauler 18’ & 20’ 22” 102” 83” 2 3500, 5200 205/75/R15 B6 6” Channel Super-Wide 16’ - 24’ 26” 102” 81.5” 2 5200, 7000 235/80/R16 B8 8” Channel Super-Wide 20’ - 44’ 28” 102” 81.5” 2 or 3 7000 235/80/R16 C1 Single Axle HD Carhauler 10’-16’ 21” 83” 83” 1 7000 235/80/R16 C4 4” Channel Carhauler 14’, 16’, & 18’ 21” 83” 83” 2 3500 205/75/R15 C5 5” Channel Carhualer 14’ - 20’ 22” 83” 83” 2 3500 205/75/R15 C8 8” Channel Equipment 20’ - 40’ 27” 83” 83” 2 or 3 7000, 8000 235/80/R16 CC 6” Channel Equipment 16’ - 24’ 25” 83” 83” 2 or 3 5200, 7000, 8000 235/80/R16 CE 5” Channel Equipment 12’-22’ 22” 83” 83” 2 5200 225/75/R15 D2 78” Medium Duty Dump 10’ & 12’ 28” 78” 78” 2 3500, 5200 225/75/R15 D3 72” Tandem Axle Dump 10’-12’ 28” 72” 72” 2 5200, 7000 225/75/R15 D5 60” Utility Dump 8’ & 10’ 26” 60” 60” 1 or 2 3500, 5200 225/75/B15 D7 83” Tandem Axle Dump 10’ - 14’ 32” 83” 83” 2 5200, 7000 235/80/R16 D8 96” Deckover Dump 14’ 34” 96” N/A 2 7000, 8000 235/80/R16 D9 83” XL Dump 16’ 32” 83” 83” 2 7000 235/80/R16 DC 83” XL High Side Dump 16’ 32” 83” 83” 2 or 3 7000 235/80/R16 DD Tandem Dual Dump 16’ - 20’ 39” 94” N/A 2 10000, 12000 235/80/R16 DH 83” High Side Dumpx 10’-14’ 32” 83” 83” 2 7000 235/80/R16 DJ 83” Low Pro XL Dump 16’ 24” 83” 83” 2 or 3 7000 235/80/R16 DK 83” Low Pro XL High Side Dump 16’ 24” 83” 83” 2 or 3 7000, 8000 235/80/R16 DL 83” Low-Pro Dump 12’ & 14’ 24” 83” 83” 2 7000 235/80/R16 DM 83” Low Pro High Side Dump 12’ & 14’ 24” 83” 83” 2 7000, 8000 235/80/R16 DN 84” Deckover Dump 10’, 12’, & 14’ 32” 84” N/A 2 5200, 7000 235/80/R16 DR Rollster™ Roll Off Dump 14’ 32” 83” N/A 2 7000, 8000 235/80/R16 DS 16’ Deckover Dump 16’ 38” 91” N/A 2 7000, 8000 235/80/R16 DT 10” I-Beam Deckover Dump 14’, 16’ 34” 96” N/A 2 7000, 8000 235/80/R16 F8 8” I-beam Deckover 16’ - 30’ 33” 96” N/A 2 or 3 5200, 7000 , 8000 235/80/R16 FD Classic Flatdeck with Dual 20’ - 40’ 38” 102” N/A 2 or 3 10000, 12000, 16000 235/80/R16 FS Classic Flatdeck with Singles 20’ - 40’ 36” 102” N/A 2 or 3 7000, 8000 235/80/R16 FY Flatdeck with Hydraulic Dovetail 30’ - 40’ 37” 102” N/A 2 or 3 10000, 12000, 16000 235/80/R16 L3 14” I-Beam Low-Pro with Duals 20’- 42’ 36” 102” N/A 2 or 3 10000, 12000, 16000 235/80/r16 L5 Light Duty Deckover 16’ - 20’ 30” 102” N/A 2 3500 225/75/R15 L6 Medium Duty Deckover 16’ - 20’ 33” 102” N/A 2 5200 225/75/R15 LD Low-Pro with Duals 20’ - 40’ 33” 102” N/A 2 or 3 10000, 12000 235/80/R16 LS Low-Pro Flatdeck with Singles 20’-44’ 33” 102” N/A 2 or 3 7000, 8000 235/80/R16 LY Low-Pro with Hydraulic Dovetail 30’ - 40’ 33” 102” N/A 2 or 3 10000, 12000 235/80/R16 P6 Angle Pipetop Trailer 14’ - 20’ 19” 83” 83” 2 3500 205/75/R15 P7 Angle Pipetop Trailer 16’, 18’, & 20’ 21” 83” 83” 2 5200 225/75/R15 P8 Angle Pipetop Trailer 16’, 18’, & 20’ 23” 83” 83” 2 7000 235/80/R16 PD Classic Pintle with Duals 20’ - 40’ 38” 102” N/A 2 or 3 10000, 12000, 15000 235/80/R16 PL Low-Pro Pintle with Duals 20’ - 40’ 33” 102” N/A 2 or 3 10000, 12000, 15000 235/80/R16 PT Pipe Hauler 40’ 35” 84” N/A 2 or 3 7000 235/80/R16 SD Step Deck Trailer 41’ - 53’ (total) 38” 102” N/A 2 or 3 12000, 15000, 16000 235/80/R16 SY Flatdeck with Singles Hydr Dove 32’ - 40’ 36” 102” N/A 3 7000, 8000 235/80/R16 T1 Single Axle HD Tilt 13’, 16’ 21” 81” 81” 1 7000 235/80/R16 T5 5” Channel Tilt 16’ & 20’ 24” 83” 83” 2 3500, 5200 225/75/R15 T6 6” Channel Tilt 16’, 20’, 22’, & 24’ 21” 83” 82” 2 or 3 7000 235/80/R16 T7 8” Channel Tilt 16’ - 40’ 24” 83” 82” 2 or 3 7000, 8000 235/80/R16 T8 Deckover Tilt 22’ & 26’ 32” 96” N/A 2 7000, 8000 235/80/R16 T9 HD Deckover Tilt 24’, 26’, 28’, & 30’ 36” 102” N/A 2 7000, 8000 235/80/R16 TD Tandem Dual Tilt 24’ - 40’ 37” 102” N/A 2 10000, 12000 235/80/R16 TF Powered Full Tilt 18’ - 24’ 22” 83” 82” 2 5200, 7000 235/80/R16 TH 83” Hydraulic Quick Tilt 16’ - 20’ 24” 83” 83” 2 3500, 5200 205/75/R15 TJ 6” Channel HD Equipment Tilt 16’ - 24’ 23” 82” 82” 2 or 3 7000, 8000 235/85/R16 TK 8” Channel HD Equipment Tilt 16’ - 44’ 23” 82” 82” 2 or 3 7000, 8000 235/85/R16 TM 83” Manual Tilt 16’, 18’, & 20’ 23” 83” 83” 2 3500, 5200 205/75/R15 U2 72” Channel Utility 8’ - 14’ 21” 72” 72” 1 3500, 5200 205/75/R15 U6 60” Channel Utility 8’ - 20’ 21” 60” 60” 1 3500, 5200 205/75/R15 U7 77” Channel Utility 8’ - 20’ 21” 77” 77” 1 3500, 5200 205/75/R15 U8 83” Channel Utility 8’ - 20’ 21” 83” 83” 1 3500, 5200 205/75/R15 UC 60” Tandem Channel Utility 10’ - 20’ 21” 60” 60” 2 3500, 5200 205/75/R15 UJ 72” Tandem Channel Utility 10’ - 22’ 21” 72” 72” 2 3500, 5200 205/75/R15 UK 77” Tandem Channel Utility 10’ - 22’ 21” 77” 77” 2 3500, 5200 205/75/R15 UL 83” Tandem Channel Utility 10’ - 22’ 21” 83” 83” 2 3500, 5200 205/75/R15

* Deck width measured from rub rail to rub rail where applicable.

Documents

General Vendor Information - dot.state.mn.us