Upload
brent-atkins
View
231
Download
0
Tags:
Embed Size (px)
Citation preview
General Systems InformationALEPH v20.01
Library Staff Training
© South Dakota Library Network, 2013©Ex Libris (USA), 2011Modified for SDLNVersion 20.01
General Systems Information for ALEPH
• Libraries in ALEPH• Libraries needed for specific activities• Staff privileges• ALEPHADM module – pc files (ini files)• ALEPHADM module – tables• Services• Task Manager
2
Libraries in ALEPH
XXX50 ADM Library – includes circulation, items, acquisitions/serialsXXX40 ILL LibraryXXX30 Course Reserves LibrarySYS01 Bibliographic LibrarySYS10 Authorities LibrarySYS60 Holding LibrarySYS00 User/Password Library
3
Circulation users: Course Reserves users:XXX50 XXX50 XXX30
Cataloging users: Acquisitions/Serials users:XXX50 XXX50 SYS00 SYS01SYS01 SYS10 SYS10 SYS60 SYS60
4
Libraries needed for specific activities
ILL users: Supervisors in functional areas:XXX50 XXX50XXX40 SYS00SYS00 SYS01 SYS10 SYS60 XXX40
5
Libraries needed for specific activities
Staff Privileges InterfaceTo access staff privileges:Right click on the key in the lower right corner of the circulation, acquisitions/serials, cataloging,ILL modules
NOTE: staff privileges are NOT accessible via theALEPHADM module
6
Staff Privileges Interface• The privileges have been grouped into tabs, with each tab listing
actions that are relevant to a single module
• Another Common tab lists actions that are not module specific
• Within each tab the actions are arranged in groups so that each group contains actions that make up a specific workflow, such as Ordering or Loan Management
• The group may be expanded to display all the actions included
• In addition, each group’s All Unspecified Subfunctions action enables implicitly allowing all of the group’s actions that have not been explicitly denied
7
Staff Privileges Interface
8
Staff Privileges Interface
9
Staff Privileges Interface
10
Make sure to assignBudgets and Order Unitsif you use them in Acquisitions
Staff Privileges for Custom Reports
11
The custom reports may be managed under the Common tab
Staff Privileges for Custom Reports
12
Click + to open Private Services
There are three options:•Circ Custom Services•Cat Custom Services•Acq/Ser Custom Services
Staff Privileges for Custom Reports
13
Allow or deny privileges according to staff user policies
NOTE: Permission to run Cataloging Custom Reports must be added to SYS01 rather than the XXX50 library
ALEPHADM module – pc files
14
The Configuration menu in the ALEPHADM module allows access to several files which control the look and functionality of the ALEPH client
NOTE: these files may also be accessed from the hard drive of the individual pc
ALEPHADM module – pc files
15
The Libraries Manager controls which libraries the pc may access
At a minimum, here is what should be in the Permitted Libraries file:XXX30 – ADM Course Reserves (if used by ADM)XXX40 – ILL libraryXXX50 – ADM librarySYS01 – SDLN Bibliographic librarySYS10 – SDLN Authority recordsSYS60 – SDLN HOL recordsPCVER – version check libraryEXT01 – used for external connections such as LOC and GPO (optional)
ALEPHADM module – pc files
16
ALEPHADM module – pc files
17
If you are missing any of the libraries, you may add them to your list.
Go to the Libraries tab, click the add new line icon:
ALEPHADM module – pc files
18
You will get a new line to fill in, fill in the library you need, click Apply
ALEPHADM module – pc files
19
To activate the library, go to the Permitted Libraries tab, double click in the box under the function you need, then click Apply
NOTE: you will need to close ALEPH and reopen it to have the changes take effect.
ALEPHADM module – tables
20
The Tables menu in the ALEPHADM module allows access to several tables which control the functionality of the entire ADM library.
ALEPHADM module – tables
21
The Tables Navigator has three sections:
Tables Libraries Command Buttons
ALEPHADM module – tables
22
To update a table, follow these steps:
Double-click the name of the file containing the table you want to update. You are asked if you want to check out the file in order to be able to edit it. Click Yes to proceed to editing mode. (You may also be asked if you wish to see the latest copy of the table).
Edit the table. Save your changes.
After you have modified the table, go to the Tables Navigator and click Check In. This sends the table back to the server and overwrites the previous version of the table file.
23
Edit the table
ALEPHADM module – tables
24
You may choose between three different table views:
Table view
Form view
Source view
ALEPHADM module – tables
25
There are three kinds of help available to explain details of an open table:HintA hint pops up when the cursor rests for several seconds on the column heading in Table view and on the field label in Form view. The hint disappears after a few seconds.
Column-specific HelpRight-click the column heading in table view and the field label in form view to open the column-specific help. The Escape key closes the column-specific help window. (NOTE: not all tables and/or columns have column specific help)
General HelpGeneral help for an open table will pop up in a window when pressing F1 or after clicking the icon. The Escape key closes the general help window.
ALEPHADM module – tables
26
Hint
Column specific help
General help
ALEPHADM module – tables
27
The final option for on-line help is through viewing the table’s source information. When viewing a table in Source mode, the table will open in a separate window using Notepad. Additional explanations will be given for the various fields of the table.
This option is usually the most comprehensive source of on-line assistance.
Services
28
Services are processes generated in ALEPH that may: •Manipulate the database in a certain way (e.g. build indexes)•Produce reports of data (e.g. circulation statistics)•Produce correspondence (e.g. overdue notices)
To access services, go to the Services option on the menu bar in the Circulation, Cataloging, ILL or Acquisitions client.
Services
29
Once you’ve selected a service, a window will be displayed prompting you for variables that will impact the report. For example, this is the General Circulation Statistics (cir-30) form:
Services
30
To fill out the form, use only lower case letters and no spaces inthe output file field, select other options from available fields:
When you have filled out the form, click Submit
Task Manager
31
The Task Manager is found in the Admin tab of the module you are working in:
Task Manager
32
The File List displays the finished jobs that have printable results.
Task Manager
33
To print, highlight your report name and click print:
Task Manager
34
If you wish to save your report to your computer, double-click on the report name, click OK.
Task Manager
35
The report name will appear in the upper pane and you can print from there.