General Procedures Roadway Inventory

General General ProceduresProcedures

Roadway Roadway InventoryInventory



OverviewOverviewThese procedures are intended to instruct personnel in the general duties and field methods used in performing Roadway Inventory. It cannot supply answers to all questions that may arise nor does it address every situation that exists in the field, but it will give personnel an understanding of their principal duties.

Some ingenuity may be required of the field and office personnel in dealing with unique situations which cannot receive specific attention in these guidelines. Supervision should be consulted as soon as practicable on doubtful issues.

Purpose of Roadway Purpose of Roadway InventoryInventory• Roadway Inventory is conducted to Roadway Inventory is conducted to

collect descriptive and statistical collect descriptive and statistical data on all roadway systems.data on all roadway systems.

• The collected data is used for The collected data is used for various reporting within the various reporting within the Department and in all certification Department and in all certification of Public roadway mileage.of Public roadway mileage.

Extent of InventoryExtent of Inventory

• The inventory will cover every road, street and The inventory will cover every road, street and alley throughout the State which is open to the alley throughout the State which is open to the public and regularly used by motor vehicles.public and regularly used by motor vehicles.

• Exceptions will be primitive or overgrown Exceptions will be primitive or overgrown roads or trails, which do not connect places or roads or trails, which do not connect places or residence, business, industry or recreation.residence, business, industry or recreation.

• The purpose of the exceptions is to exclude The purpose of the exceptions is to exclude the numerous inconsequential roads and trails the numerous inconsequential roads and trails which exist in some municipalities.which exist in some municipalities.

Method of InventoryMethod of Inventory• The inventory will be taken by driving a motor The inventory will be taken by driving a motor

vehicle over the road to be inventoried and vehicle over the road to be inventoried and recording the location of items to be inventoried recording the location of items to be inventoried in relation to the beginning point of the road.in relation to the beginning point of the road.

• The recorded locations will be supplemented by The recorded locations will be supplemented by descriptive data as necessary.descriptive data as necessary.

• Recording will be conducted using automated Recording will be conducted using automated roadway inventory / data collection software and roadway inventory / data collection software and devices that have been approved or prepared devices that have been approved or prepared forms.forms.

Details are described in these procedures.Details are described in these procedures.

Order of InventoryOrder of Inventory• The Supervisor of the inventory project will determine in The Supervisor of the inventory project will determine in

advance which roads receive priority for the inventory process.advance which roads receive priority for the inventory process.

• Typically, road inventory is performed by the route hierarchy Typically, road inventory is performed by the route hierarchy

system:system: – InterstateInterstate

– USUS

– NJNJ

– 500 System500 System

– 600 System600 System

– and then at the municipal road level.and then at the municipal road level.

Direction of SurveyDirection of Survey• All route systems will be inventoried in the All route systems will be inventoried in the

roadway’s primary direction starting at the roadway’s primary direction starting at the southerly or westerly most point and southerly or westerly most point and continue in the northerly or easterly continue in the northerly or easterly direction.direction.

• A comparison of the existing roadway A comparison of the existing roadway inventory notes, if available, will be inventory notes, if available, will be consulted to determine if the roadway’s consulted to determine if the roadway’s primary direction is currently established.primary direction is currently established.

Numbering of Roadway Numbering of Roadway SystemsSystems

• All roadways inventoried will be assigned a unique All roadways inventoried will be assigned a unique Standard Route IdentificationStandard Route Identification number (SRI). number (SRI).

• Currently, local roadways in each municipality are Currently, local roadways in each municipality are assigned a assigned a four (4) digit numberfour (4) digit number. This number . This number will be incorporated into the new SRI in order to will be incorporated into the new SRI in order to avoid renumbering the existing inventory sheets.avoid renumbering the existing inventory sheets.

• The method of assigning and deriving SRI numbers The method of assigning and deriving SRI numbers is detailed in the information package.is detailed in the information package.


• All roads and streets will be classified into one or more of All roads and streets will be classified into one or more of the following route systems:the following route systems:

1.1. Interstate RoutesInterstate Routes

22 .. U. S. numbered RoutesU. S. numbered Routes

33 .. New Jersey State HighwaysNew Jersey State Highways

44 .. “500” Routes“500” Routes

55 .. County RoadsCounty Roads

66 .. Municipal streets and selected private Municipal streets and selected private roadsroads

and …….and …….


7.7. Authority roads - this includes:Authority roads - this includes:

• New Jersey TurnpikeNew Jersey Turnpike

• Garden State ParkwayGarden State Parkway

• Atlantic City ExpresswayAtlantic City Expressway

• Palisades Interstate ParkwayPalisades Interstate Parkway

which may be inventoried when directed.which may be inventoried when directed.

Roadway InventoryRoadway InventoryPrior to inventory, data will be supplied that has been Prior to inventory, data will be supplied that has been recorded on recorded on Roadway Inventory SheetRoadway Inventory Sheet (PT-B-21) revised or (PT-B-21) revised or contained in electronic database format. contained in electronic database format.

This data will include, but is not limited to:This data will include, but is not limited to:

• Mileage with respect to the beginning of the routeMileage with respect to the beginning of the route

• Length of sectionLength of section

• Cross sectionCross section

• Pavement surface typePavement surface type

• Number of lanesNumber of lanes

• Location of structures, etc.Location of structures, etc.

Roadway InventoryRoadway InventoryDuring normal inventory, the accuracy of the data will be During normal inventory, the accuracy of the data will be verified. All new roadways not previously inventoried will have verified. All new roadways not previously inventoried will have the above features recorded electronically and new inventory the above features recorded electronically and new inventory sheets will be prepared if required. In cases of disagreement the sheets will be prepared if required. In cases of disagreement the new data will be recorded and the previous data will be struck new data will be recorded and the previous data will be struck out but out but NOTNOT obliterated.obliterated.

In addition, data not previously recorded on existing data sheets In addition, data not previously recorded on existing data sheets will be collected. Data may include:will be collected. Data may include:

• Width and type of shouldersWidth and type of shoulders

• Presence of curbingPresence of curbing

• Parking regulations as noted by signingParking regulations as noted by signing

• Location of signalized intersectionsLocation of signalized intersections

Roadway InventoryRoadway Inventory

Following the completing of Roadway Following the completing of Roadway Inventory in each municipality, a Inventory in each municipality, a database containing raw data in an database containing raw data in an approved electronic format and the approved electronic format and the field notes will be made available.field notes will be made available.

Roadway InventoryRoadway InventoryRoads that have an official route number (i.e. 505, Roads that have an official route number (i.e. 505, 605, 705, etc.) will be identified by that number in the 605, 705, etc.) will be identified by that number in the SRISRI when being inventoried. when being inventoried.

Municipal roads should be numbered consecutively, Municipal roads should be numbered consecutively, beginning with number 1001 as the last four numbers beginning with number 1001 as the last four numbers of the assigned of the assigned SRISRI number in each municipality. number in each municipality.

Roadway InventoryRoadway InventoryLocal roads which cross municipal boundaries will be inventoried Local roads which cross municipal boundaries will be inventoried starting in the municipality in which the roadway originates and is starting in the municipality in which the roadway originates and is to continue in the primary direction until the point of the roadway’s to continue in the primary direction until the point of the roadway’s termination.termination.

The portion of the roadway that deviate outside of the starting The portion of the roadway that deviate outside of the starting municipality will be cross-referenced in the adjacent municipality’s municipality will be cross-referenced in the adjacent municipality’s notes.notes.

There is to be no overlapping of There is to be no overlapping of inventoried roads.inventoried roads.

Roadway InventoryRoadway InventoryCounty and Corporate Line roads will be logged at the time the County and Corporate Line roads will be logged at the time the County in which they appear is being inventoried. The jurisdiction County in which they appear is being inventoried. The jurisdiction of these roads will be determined by the office personnel.of these roads will be determined by the office personnel.

Except when otherwise directed, all roads usually open for the Except when otherwise directed, all roads usually open for the use of the public in State and Federal reservations will be use of the public in State and Federal reservations will be inventoried. inventoried.

When maps for there areas are available, they will be supplied to When maps for there areas are available, they will be supplied to the field personnel.the field personnel.

Classification of Surface Classification of Surface TypesTypes

Each section of road will be classified by inspection and Each section of road will be classified by inspection and recorded in the appropriate data field under one of the recorded in the appropriate data field under one of the following types:following types:

• Type G Type G Low Type Bituminous RoadLow Type Bituminous Road• A mixed bituminous or bituminous penetration road, with a surface A mixed bituminous or bituminous penetration road, with a surface

course of course of one inch or moreone inch or more of compacted thickness, consisting of: of compacted thickness, consisting of:– GravelGravel– StoneStone– Sand or similar materialSand or similar material

mixed with bituminous material under partial mixed with bituminous material under partial control as to control as to grading and proportions.grading and proportions.


• Type I Type I High Type Bituminous RoadHigh Type Bituminous Road• A road which has been constructed of a surface of A road which has been constructed of a surface of one one

inch or moreinch or more in compacted thickness consisting of: in compacted thickness consisting of:– Bituminous concrete or sheet asphalt, prepared in accordance Bituminous concrete or sheet asphalt, prepared in accordance

with precise specifications controlling graduation, proportions with precise specifications controlling graduation, proportions and consistency of compositionand consistency of compositionor ofor of

– Rock asphaltRock asphalt

The surface course may consist of combinations of The surface course may consist of combinations of two or more layerstwo or more layers such as a bottom and top such as a bottom and top course, or a binder and a wearing surface.course, or a binder and a wearing surface.


• Type J Type J Portland Cement Concrete RoadPortland Cement Concrete Road• A road consisting of:A road consisting of:

– Portland Cement concrete surfacesPortland Cement concrete surfaces

• Type K Type K Brick RoadBrick Road• A road consisting of a:A road consisting of a:

– Paving brick surfacePaving brick surface

• Type L Type L Block RoadBlock Road• A road consisting of:A road consisting of:

– Stone blockStone block– Wood blockWood block– Asphalt block or other form of block, Asphalt block or other form of block, exceptexcept paving paving

brick.brick.


• Other types:Other types:

– WoodWood

– Steel plateSteel plate

– Open gridOpen grid

will be considered as roadway surface will be considered as roadway surface type only when present on type only when present on BRIDGESBRIDGES of of lengths of lengths of 500 feet or more.500 feet or more.

Roadway Inventory Data Roadway Inventory Data CollectionCollection

The following is a summary of the data The following is a summary of the data needed to be collected for each section of needed to be collected for each section of roadway inventoried. Data will be collected roadway inventoried. Data will be collected in an electronic format using approved in an electronic format using approved roadway inventory/data collection software roadway inventory/data collection software and devices.and devices.

Roadway Inventory Data Roadway Inventory Data CollectionCollectionA A Roadway Inventory SheetRoadway Inventory Sheet shall be generated for shall be generated for each roadway if required:each roadway if required:

1. Record the County and Municipality in which the portion of 1. Record the County and Municipality in which the portion of inventoried road is located. If a corporate line is inventoried road is located. If a corporate line is crossedcrossed or is along or is along the the centercenter of the road, identify of the road, identify bothboth municipalities in the heading. municipalities in the heading.

2.2. All inventoried roads will be identified by their official route All inventoried roads will be identified by their official route numbers and by numbers and by SRISRI numbers. Roads or sections of roads which numbers. Roads or sections of roads which are on two or more route systems, will be identified by are on two or more route systems, will be identified by allall the route the route numbersnumbers applicable.applicable.


3. Identify jurisdiction (ownership) as one of the 3. Identify jurisdiction (ownership) as one of the following:following:

a. Statea. State

b. Countyb. County

c. Municipalc. Municipal

d. State Forest, Park or Authorityd. State Forest, Park or Authority

e. Federal Forest, Park or Authoritye. Federal Forest, Park or Authority

f. County Park or Authorityf. County Park or Authority

g. Municipal Park or Authorityg. Municipal Park or Authority

h. Municipal Alleyh. Municipal Alley

i. Toll or other Agency (Identify official name)i. Toll or other Agency (Identify official name)

j. Privatej. Private


4. Record the posted street name. If not posted but available from 4. Record the posted street name. If not posted but available from maps, maps, record the map namerecord the map name, followed by , followed by “from map “from map source”.source”.

5.5. Record the license number of the vehicle used to conduct the Record the license number of the vehicle used to conduct the inventory.inventory.

6.6. Record the predetermined correction constant for the vehicle Record the predetermined correction constant for the vehicle involved.involved.

7.7. Show the first initial and last name of the Party Chief and Show the first initial and last name of the Party Chief and Recorder.Recorder.

8.8. Record the date of inventory. Record the date of inventory.


9.9. The straight line diagram (SLD) is presumed to be along the The straight line diagram (SLD) is presumed to be along the center linecenter line of the inventoried road on of the inventoried road on contiguous or contiguous or uniformly divided highwaysuniformly divided highways. At times it will be necessary . At times it will be necessary to conduct inventory in to conduct inventory in bothboth directionsdirections..

Examples of this are widely separated roadways on different Examples of this are widely separated roadways on different alignments or on different levels, complex interchanges and alignments or on different levels, complex interchanges and road where visibility is restricted because of road geometrics.road where visibility is restricted because of road geometrics.

Items are to be recorded in the appropriate data field on the Items are to be recorded in the appropriate data field on the right and/or left of the center line at the mile post in the right and/or left of the center line at the mile post in the direction of the survey.direction of the survey.


10.10. Intersecting streets and ramps will be shown by single Intersecting streets and ramps will be shown by single straight lines approximating the actual angles of intersection with straight lines approximating the actual angles of intersection with the road being inventoried.the road being inventoried.

Streets will be identified by their name and number.Streets will be identified by their name and number.

The direction of traffic will be shown for all ramps and one way The direction of traffic will be shown for all ramps and one way streets that intersect the road being inventoried.streets that intersect the road being inventoried.

11.11. Railroad grade crossings will be shown the same as streets, Railroad grade crossings will be shown the same as streets, but the but the railroad symbol railroad symbol will be used instead of lines. A will be used instead of lines. A single single symbolsymbol will be used regardless of the number of tracks and the will be used regardless of the number of tracks and the mile point location of the center of the track shall be recorded.mile point location of the center of the track shall be recorded.


12.12. All bridges and other structures carrying the road and having All bridges and other structures carrying the road and having a a total opening of total opening of over 20 feetover 20 feet as measured in the as measured in the direction of direction of inventoryinventory will be recorded in the appropriate data field. will be recorded in the appropriate data field.

All culverts, pipes and multiples of each for which the aggregate All culverts, pipes and multiples of each for which the aggregate length of spans or diameters plus the intervening separations, length of spans or diameters plus the intervening separations, piers or fill material is piers or fill material is more than 20 feetmore than 20 feet as measured along the as measured along the center linecenter line of the road shall also be shown as a bridge structure. of the road shall also be shown as a bridge structure.

EXCEPTION:EXCEPTION: Such multiple culverts or pipes shall be considered separate structures Such multiple culverts or pipes shall be considered separate structures if the fill between adjacent openings is greater than one half the smaller opening, if the fill between adjacent openings is greater than one half the smaller opening, then each structure must meet the then each structure must meet the 20 foot20 foot requirement to qualify as a bridge. requirement to qualify as a bridge. Visible stream crossings of the inventoried road will be recorded in the appropriate Visible stream crossings of the inventoried road will be recorded in the appropriate data field.data field.


13.13. All structures passing over the road will be All structures passing over the road will be recorded in the appropriate data field.recorded in the appropriate data field.

Included among these are: Included among these are: bridges, viaducts, bridges, viaducts, pedestrian overpasses pedestrian overpasses andand pipes. pipes.

14.14. The location of county and municipal The location of county and municipal boundaries will be recorded in the appropriate boundaries will be recorded in the appropriate data field and shown by a data field and shown by a dot-dash linedot-dash line on the on the inventory sheets.inventory sheets.

The names of the municipalities should also be The names of the municipalities should also be shown in their proper positions. When these shown in their proper positions. When these boundaries cannot be determined physically, they boundaries cannot be determined physically, they should be scaled from available maps, and should be scaled from available maps, and marked marked “scaled from map”.“scaled from map”.


15.15. The primary direction of the roadway The primary direction of the roadway should be recorded.should be recorded.

Primary direction is either:Primary direction is either:

South - NorthSouth - North

oror

West - EastWest - East

16.16. The recording of road alignment data The recording of road alignment data such as such as deflection anglesdeflection angles and and beginning beginning and ending of curvesand ending of curves shall be recorded at shall be recorded at their their estimatedestimated locations. locations.


17.17. The location of all intersections or intersecting The location of all intersections or intersecting

streets will be recorded. Intersections controlled by streets will be recorded. Intersections controlled by

traffic signals shall be noted by a traffic signal symbol traffic signals shall be noted by a traffic signal symbol

TCS TCS ..

Flashing beacons and other warning devices which do Flashing beacons and other warning devices which do

notnot have provisions for have provisions for redred, , amberamber and and greengreen lights lights

and which and which cannotcannot be adapted to the control of traffic be adapted to the control of traffic

shall shall notnot be recorded. be recorded.


18.18. The descriptive items that relate to the The descriptive items that relate to the roadway between the outer edges of shoulder or roadway between the outer edges of shoulder or pavement will be recorded in the appropriate data pavement will be recorded in the appropriate data field or on the inventory sheet in the columns field or on the inventory sheet in the columns provided as they appear in the field.provided as they appear in the field.

Whenever a change occurs in Whenever a change occurs in one or moreone or more of the of the items and continues for a significant distance, items and continues for a significant distance, 500 500 feet or morefeet or more, the complete roadway section shall , the complete roadway section shall be recorded along with the mile point reading in be recorded along with the mile point reading in the appropriate data field.the appropriate data field.

Cross sections of contiguous roads shall be Cross sections of contiguous roads shall be recorded in the appropriate data field or entirely recorded in the appropriate data field or entirely on the right side of the inventory sheet.on the right side of the inventory sheet.

Roadway Inventory Data Roadway Inventory Data CollectionCollectionThe cross sections of reverse runs will be The cross sections of reverse runs will be recorded in the appropriate data field or on recorded in the appropriate data field or on their respective sides of the inventory sheet their respective sides of the inventory sheet since it would appear that way in the field.since it would appear that way in the field.

The recording of road data should be kept The recording of road data should be kept clear of any diagrams and descriptive data clear of any diagrams and descriptive data fields at all times to maintain clarity in the fields at all times to maintain clarity in the notes.notes.

Roadway Inventory Data Roadway Inventory Data CollectionCollectionSpecific items and the manner of recording are as Specific items and the manner of recording are as follows:follows:

a.a. Record the measured Record the measured widthwidth and the alphabetical symbol for the and the alphabetical symbol for the surface type in the appropriate data field. surface type in the appropriate data field. When recording the When recording the width of composite roadways show every surface type present in width of composite roadways show every surface type present in the roadway in addition to all shoulders if they are present.the roadway in addition to all shoulders if they are present.

b.b. Show the Show the minimum number of lanesminimum number of lanes available to traffic during a available to traffic during a 24 hour period24 hour period. The number of lanes shall be recorded . The number of lanes shall be recorded individuallyindividually for each roadway. for each roadway.

When lanes are not marked:When lanes are not marked:

14 feet shall be considered the minimum width required 14 feet shall be considered the minimum width required for for two (2) lanes of traffictwo (2) lanes of traffic

3 lanes must be lined3 lanes must be lined


4 lanes must either be lined or at least 40 feet in width.4 lanes must either be lined or at least 40 feet in width.

For 5 lanes or more, an allowance of 10 feet in width is For 5 lanes or more, an allowance of 10 feet in width is required for required for each additionaleach additional lane. lane.

While these criteria will serve as a guide, actual usage shall be While these criteria will serve as a guide, actual usage shall be the primary consideration in determining the number of lanes.the primary consideration in determining the number of lanes.

c.c. Shoulder measured width and surface type shall be recorded in Shoulder measured width and surface type shall be recorded in the same manner as the roadway. the same manner as the roadway. The width to be considered The width to be considered refers to that portion that is usable and within the roadway refers to that portion that is usable and within the roadway limits.limits.

d.d. Parking shall be recorded as follows:Parking shall be recorded as follows:

U - Parking is permitted and obviously possible so that U - Parking is permitted and obviously possible so that the the roadway or shoulder is subject to parking all or roadway or shoulder is subject to parking all or some of some of the time.the time.

M - M - MeteredMetered

P - P - Parking prohibited at all timesParking prohibited at all times


e.e. The presence of The presence of curb and guttercurb and gutter shall be recorded when such shall be recorded when such curbs define any side of the roadbed, pavement or median curbs define any side of the roadbed, pavement or median and are present for a minimal continuous length and are present for a minimal continuous length approximating approximating 500 feet.500 feet.

f.f. The types and measured widths of The types and measured widths of medians and lane medians and lane separatorsseparators shall be recorded when present for length shall be recorded when present for length approximately approximately 500 feet or more.500 feet or more.

Measured widths shall be recorded to the nearest lowest foot.Measured widths shall be recorded to the nearest lowest foot.

When widths are When widths are not uniformnot uniform, the points of change shall be , the points of change shall be located and the measured widths at these points shall be located and the measured widths at these points shall be recorded.recorded.

Average widths shall not be recorded.Average widths shall not be recorded.

The type of median normally has reference to the surface The type of median normally has reference to the surface covering and is recorded as one of the roadway surface types.covering and is recorded as one of the roadway surface types.

Roadway Inventory Data Roadway Inventory Data CollectionCollection““Parkland”Parkland” or or “Business”“Business” shall be substituted for the surface shall be substituted for the surface type when the median is used for either of these purposes.type when the median is used for either of these purposes.

The heights of barrier curbs are measured to the nearest inch.The heights of barrier curbs are measured to the nearest inch.

These measurements are critical, especially when recording These measurements are critical, especially when recording heights that approach heights that approach 16”, 24” and 36”.16”, 24” and 36”. Barriers and guide Barriers and guide rail in the median shall be recorded. rail in the median shall be recorded. The recording of heights of The recording of heights of guide rail is not required.guide rail is not required.

g.g. All openings in the median, which are used for the passage of All openings in the median, which are used for the passage of vehicles shall be recorded in the appropriate data field. The vehicles shall be recorded in the appropriate data field. The recordings shall clearly indicate the direction of passage recordings shall clearly indicate the direction of passage through the openings. Openings which are reserved for the through the openings. Openings which are reserved for the passage of official vehicles - passage of official vehicles - police, fire, rescue, etc.police, fire, rescue, etc. - shall - shall also be recorded but clearly distinguished from all others. also be recorded but clearly distinguished from all others. Openings which allow the passage of vehicles at street Openings which allow the passage of vehicles at street intersections shall be recorded in such a manner as to clearly intersections shall be recorded in such a manner as to clearly indicate directions and turning movements available to vehicles.indicate directions and turning movements available to vehicles.


19.19. The roadway’s The roadway’s Functional ClassificationFunctional Classification and and Urban/RuralUrban/Rural designation shall be identified by either field designation shall be identified by either field or office personnel. or office personnel.

The Highway Functional Classification codes are as The Highway Functional Classification codes are as follows:follows:

CODECODE FUNCTIONAL CLASS NAMEFUNCTIONAL CLASS NAME

0101 Rural InterstateRural Interstate0202 Rural Principal Arterial (other)Rural Principal Arterial (other)0606 Rural Minor ArterialRural Minor Arterial0707 Rural Major CollectorRural Major Collector0808 Rural Minor CollectorRural Minor Collector0909 Rural LocalRural Local1111 Urban InterstateUrban Interstate1212 Urban Freeway / ExpresswayUrban Freeway / Expressway1414 Urban Principal Arterial (other)Urban Principal Arterial (other)1616 Urban Minor ArterialUrban Minor Arterial1717 Urban CollectorUrban Collector1919 Urban LocalUrban Local


The Rural / Urban Area codes are as follows:The Rural / Urban Area codes are as follows:CODECODE AREA NAMEAREA NAME

00 Rural AreaRural Area11 NY/NE New Jersey Urbanized AreaNY/NE New Jersey Urbanized Area44 Philadelphia Urbanized AreaPhiladelphia Urbanized Area6363 Wilmington Urbanized AreaWilmington Urbanized Area6868 Allentown/Bethlehem Urbanized Allentown/Bethlehem Urbanized

AreaArea6969 Trenton Urbanized AreaTrenton Urbanized Area128128 Atlantic City Urbanized AreaAtlantic City Urbanized Area233233 Vineland/Milleville Urbanized AreaVineland/Milleville Urbanized Area999999 Small Urban AreasSmall Urban Areas


20. The (21) County and Municipal codes shall be determined by 20. The (21) County and Municipal codes shall be determined by the following:the following:

COUNTYCOUNTY CODECODE COUNTYCOUNTY CODECODE

AtlanticAtlantic 0101 MercerMercer 1111

BergenBergen 0202 MiddlesexMiddlesex 1212

BurlingtonBurlington 0303 MonmouthMonmouth 1313

CamdenCamden 0404 MorrisMorris 1414

Cape MayCape May 0505 OceanOcean 1515

CumberlandCumberland 0606 PassaicPassaic 1616

EssexEssex 0707 SalemSalem 1717

GloucesterGloucester 0808 SomersetSomerset 1818

HudsonHudson 0909 SussexSussex 1919

HunterdonHunterdon 1010 UnionUnion 2020

WarrenWarren 2121



End of PresentationEnd of Presentation

Documents

General Procedures Roadway Inventory