General CAL

8/3/2019 General CAL

1/4

TEST&

MEASUREMENTS

eurotron

EasyCal

UniCal

MicroCal

The most complete line ofprocess and laboratory calibrators

Bulletin 08-01.3 E

VoltageCurrentFrequencyThermocoupleResistanceThermometerPressureTemperature

CalpMan 2000Software to documentyour calibration and totest activities incompliance with ISO9000

MicroCal P/P2

UniCal MMX2

UniCal

MicroCal PM200 System

MicroCal 2+

MicroCal Pzero

Eurotron - One of the world leaders in high technology equipments: portable flue gas analysers - high accuracy calibrators - non-contact IR thermometers.

See otherProducts inside


2/4

EasyCal is a complete family of

rugged, compact, accurate, simulators

for the most common process signals.

This series includes five different

models:: 0/22mA current loop

simulator (built in 24Vdc power

supply).

: 24Vcc current loop

power supply.

A rugged 23positions rotative

switch select the

simulation value. All

instruments are

supplied complete

with a calibration

certificate.

No other instrument is easier to be

used ! !

EasyCal mA

EasyCal pH

EasyCal PS

EasyCal Tc

EasyCal Rtd

: Thermocouple

simulators.Available for Tc type K, J or T.

: Resistance

thermometer simulators Pt100

( =0.00385). Models with -200 to

800C and -10 to 250C ranges.: Glass electrode

simulator from 0 to 14pH with high

impendence 1000M test.

a

W

UniCal V, mA, Tc, Rtdand are

instruments designed to meet the

needs of instrumentation and

engineers and managers both in

laboratory and in field work. The

ranges are the most common used to

check and calibrate process

instruments.The UniCal is accurate, rugged and

easy to use. These instruments havefive operational mode: Generator,

Simulator, Indicator, Indicator on

powered circuits, Current loop

power supply.

Quality

24 Vdc

is a palm-top

multimeter-calibrator with 15 functions

in one rugged and compact 2 channels

unit.Simultaneous simulation and measure

indication. It include a standard

AC+DC multimeter and a calibrator for

Voltage, Current and frequency.

UniCal MMX2

A complete system for testing,

measuring and calibrating on a single,

compact, portable unit. You can select

between 14 type of thermocouple,

Pt100, Ni100 and Ni120, mV, V, mA,

Ohm.

1 or 2 simultaneouschannels calibrator for processsignals (mA and V).

multifunction calibratorfor thermocouples, resistancethermometers, mV and mA. Itsbasic accuracy is 0.03% of reading.

, Similar characteristicsof MicroCal 1+ but with intrinsicsafety EEx ia IIC T6 approval.

high accuracy calibrator(0.02% of rdg). Two insulatedchannels for simultaneoussimulation and measure on TRXcalibration.

high accuracy calibratorwith a basic accuracy of 0.01% of

rdg (mV range).

MicroCal 1+ MAV,

MicroCal 1+ ,

MicroCal 1 I.S.

MicroCal 2+,

MicroCal 10+,

COMPACT

SIMULATORS

SINGLE

FUNCTION

PALM-TOP

MULTIFUNCTION

PALM-TOP

FOR MORE CONVENIENCE

EasyCal UniCal MicroCal

0.1% No With 23 position0.1% No manual selector 0.04% No0.05% No Ramp, Cycle &0.1% No Sequence0.04% No0.04% No0.03% No AC Measurements

Available I.S. ver.

Calibration procedures

0.02% Opt0.03% No Available I.S. ver.

0.03% No0.02% Std 2 rows display0.02% No0.02% Std Calibration procedures0.01% Std0.005% Std High Accuracy

Signal Calibrators

Best 2 channelModel Simulation Measure Accuracy mA & V Note

mA mV V Tc Rtd Ohm Hz mA mV V Tc Rtd Ohm Hz bar % rdg

EasyCal mAEasyCal TcEasyCal RtdUniCal mAUniCal VUniCal TcUniCal RtdUniCal MMX2MicroCal 1+ MAVMicroCal 1+

MicroCal 1+ RtdMicroCal 2+MicroCal 10MicroCal 200MicroCal 200+MicroCal 2000+

Opt.

Opt.

Opt.

(See dedicated bulletins for more characteristics)

TEST&MEASUREMENTS


3/4

MicroCal multifunction calibrators are

the instruments to keep your test and

process equipment adequately

calibrated for ISO9000 compliance.They are portable very high accuracy,

with 2 independent and insulated

simultaneous channels. Compact,

rugged, easy to use and expandible,

they allow you to simulate and

measure: mV, V, mA (active and

passive loop), ohm, thermocouples,

resistance thermometers, frequency

and pulse.All 3 models can be connected to the

pressure module MicroCal PM200 to

add them the pressure generation

and measure capability. Using the

PC software and the

MicroCal T temperature calibrators, it

is possible to have a true calibration

and certification system for

thermocouple and resistance

thermometers. The 3 models aredifferent for their accuracy and for the

available accessories.

CalpMan Plus

MULTIFUNCTION

HIGH ACCURACY

MULTIFUNCTION

PRESSURE

MicroCal PM200

MicroCal PM200

MicroCal PM200 System

is a true universal

signal & pressure calibrator with built-

in pump. This pressure module

designed to expand the MicroCal

200/200+ and MicroCal 2000+

calibrators. Connecting this module to

the signal calibrator you are able to

measure and generate gauge,

differential, vacuum, and absolute

pressure simultaneously with signal

measurements.The portable

calibration System is the most

advanced, powerful and user friendly

indicator-simulator available.To simplify your calibration activity and

for more accuracy, the module can be

furnished with 2 internal pressure

sensors (2 and 20 bar f.s.), Internal

hand pump, ventilation valve and fine

adjustment. One external sensor can

be connected for high pressure

measurements.is the ideal

calibrator to inspect, calibrate all

process instruments and in particular

the pressure and signal transmitters. An important feature is the internalpower supply (24 Vdc)able to connect itdirectly to a passive current loop.

MicroCal PZero: It uses an integrated

sensor made in stainless steel andcan be used to measure all AISI316compatible fluids. The MicroCalPzero includes an auxiliary Voltageand current input for in fieldtransmitters calibration. Internalprocedure for pressostat cheks andleak test are standard features.

MicroCal P

MicroCal P2

is a rugged instrument andcan measure static and differentialpressure of air and inert gaseswithin the range from vacuum to 20bar. Flexibility is assured byinterchangeable pressure modulesfrom 20 mbar up to 20 bar f.s.. Thisallow you the best accuracy andresolution in each range in a singleinstrument. Internal procedure forpressostat cheks and leak test areincluded.

has the samespecifications as MicroCal P but

with additional signal input fortransmitter signals (0 - 20V and 0 -22mA) reading.

A wide range of manual pump areavailable to generate vacuum andpressure up to 700 bar.

MicroCal 200/200+ & 2000+ MicroCal Pzero / P & P2

UNIVERSAL

AND PRESSURE

MicroCal PM200

PALM-TOP

PRESSURE

BestModel Simulation Measuring Accuracy mA & V Note

mA mV V Tc Rtd Pressure mA mV V Tc R td Pressure

2 channel

Signal Calibrators

MicroCal P100MicroCal PzeroMicroCal PMicroCal PM200

0.05% f.s. No Sensor AISI3160.05% f.s. Std Sensor AISI3160.05%rdg Opt Pressure Modules0.025%rdg StdOpt. Int.

Opt. Ext.

Opt. Ext.Opt. Ext.(1)

(1)(1)

(2)

(1) With EasyCal mA current simulator

(2) With UniCal mA current Calibrator

TEST&MEASUREMENTS


4/4

S

pec

ifica

tions

may

changew

ithou

tn

otice

.

Temperature represents the mostimportant parameter to be monitoredwhen we have to satisfy requirements,such as Quality, operating safety, andindustrial process reliability. Whenbeing installed in a process,thermocouples, resistancethermometers, and every other kind oftemperature sensors, are subjected tomechanical, chemical and thermicstresses, which accelerate theirageing. So, it is better to verify andcertify every sensor at regular timeintervals.

A wide range of standard and specialmetallic inserts is available to satisfyall calibration requirements.

DRY BLOCK

TEMPERATURE

MicroCal T100 / T500 & T1100

Companies Quality managers andsupervisors ask for drawing up, filing,and analyzing results, and a trace ofverifying activity and periodiccalibrations as regards process andlaboratory instrumentation.In this view, has realized

a Windows 95software package. iscompatible with all Eurotron signal,temperature and pressure Calibrators(UniCal and MicroCal series), andunifies in one software the laboratorycalibrations management.Software main characteristics are:

Standard and laboratoryinstrumentation managementCalibrations instruments ticklerPrinting a detailed andpersonalized calibration report asISO9000 rules requirementFiling test data on hard disk inorder to have them available in anymoment

Possibility of calibrating in anautomatic way (RS232), using allEurotron calibrators, in semi-automatic way if the instrument tobe calibrated is a transmitter ormultimeter, etc.Very simple to use, to program andto connect

This software simplifies, speeds andminimize mistakes in preparingverifying documents, so it is a goodinstrument for calibration laboratory.It is a Windows 95/98/NT and Y2Kcompatible program

EurotronCalpman 2000

Calpman 2000

TM

!

!

!

!

!

!

SOFTWARE

TO CALIBRATE

CalpMan 2000

TEMPERATUREAND SOFTWARE

MicroCal P100

MicroCal P100

MicroCal P100IS

EEx ia

IIC T5

has been designedfor industrial world requirements, inwhich characteristics such ascompactness, ruggedness andreliability, are very important, as wellas accuracy, linearity, and stability.

is composed by avery compact digital indicator using astainless steel 17-4 sensor and oneintegrated pump for generatingpressure.

has similar

specification as MicroCal P100, and it

is certified for Intrinsic Safety

applications.

The available ranges are:0-2 bar, 0-50 bar, 0-100 bar, 0-250bar and 0-350 bar. Ranges up to1000bar are available on request.

MicroCal P100/100IS

Model Range Stability Uniformity Buit-in 0.01Cindication

Radial AxialMicroCal T100 -30 to 125C (opt 150C) 0.03C 0.1C @ 100C 0.2C @ 80mm YESMicroCal T500 Tamb to 550C 0.05C @ 450C 0.2C @ 450C 0.8C @ 80mm YESMicroCal T1100 200 to 1100C 0.3C @ 1000C 0.2C @ 800C 0.3C @ 100mm NO

(opt 600C)

EUROTRON Italiana S.r.l.

V.le F.lli Casiraghi 409/413I 20099 Sesto S. Giovanni (MI)Tel.: +39-02 248820.1Fax: +39-02 2440286

Distributed by:

eurotronw w w . e u r o t r o n . c o m

Signal Calibrators

TEST&MEASUREMENTS

Documents

General CAL