Please

share with

your colleagues.

DISTRIBUTORS AND MANUFACTURERS’ REPRESENTATIVES FOR MARKET LEADING, INNOVATIVE ENVIRONMENTAL EQUIPMENT

www.indachem.com

Better

performance,

at a lower

operational cost

The Exclusive Canadian Distributor of the PolyBlend Product Line.

416.743.3751 indachem.com

Still the leader. Indachem is proud to continue to provide Canada’s water and wastewater industry with PolyBlend® – the market leader in polymer makedown and feed systems.

Designed to overcome the weaknesses of conventional polymer wetting technologies, the PolyBlend system simply performs. Based on a keen understanding of polymer hydration chemistry, the system provides a fully hydrated, concentrated polymer solution without agglomerations and with only minimal mixing required for maximum polymer effectiveness. The result, less polymer consumption, better process performance, and lower operational cost – all with the smallest footprint in the industry.

With old technology being repackaged today, it is easy to be fooled.

Stick with the PolyBlend system and the trusted experience and service offered by Indachem.

Now there is a reliable option to Chlorine Gas and Bulk Sodium Hypochlorite.

Utilizing 150 plus years of combined experience selling, designing, manufacturing, installing and servicing onsite hypochlorite generation equipment, the team at PSI have implemented innovations to ensure equipment reliability matches the operational benefits of switching to an OSHG system.

Making Bleach Made Easy

• Low Cost Hypochlorite

• Safe

• Vertical V-Ray Cell Design

• Immediate Hydrogen Removal

• Enhance System Performance

• Reduce Scaling

• Small Footprint

• Low Maintenance

• 24 Hour Service

The Tank Shark optimizes water chemistry and quality within reservoirs and elevated storage tanks.

Large water reservoirs are prone to water quality problems as they are typically stagnant with as little as one to two percent turnover per day. This lack of turnover allows for biological re-growth, nitrification, and temperature stratification. These factors can all compound to produce a poor or even unhealthy water quality leading to consumer complaints and related water quality issues within the distribution system.

The Tank Shark process has four major functions:

1. Mixing in order to achieve a homogenous solution.

2. Mixing to eliminate temperature stratification.

3. Sampling of mixed water for chlorine residual analysis.

4. Chemical injection directly within the flowing, mixed water to allow for re-chlorination and improved water quality.

Dry Makedown & Feed SystemsThe IPM system is used to store, feed, dissolve, and deliver chemical to the desired process point. They are used in many applications for municipal and industrial water and wastewater treatment.

Typical applications include:

• Hydrated & Quick Lime Systems

• PAC/GAC Systems

• Soda Ash Systems

• Any Other Dry Chemical Feed Systems

Each system is custom engineered to your specifications with multiple options available. These systems normally include Storage Silo, Pneumatic silo fill pipe assembly with NEMA 4X operator station, Dust collection system, caged ladder & hand rail for roof access , level devices, Bin Activator or Vibrators, Volumetric screw feeder, Slurry make down/storage tank with mixer, and level devices, Slurry feed pumps, all required piping and valves, and local control system with programmable logic controller (PLC).

Steltec manufactures high quality, engineered ORP and pH analyzers and controllers.

Designed for recirculating and once through systems, the proprietary control algorithm is ideal for applications with long lag times, variable flow conditions, and demand fluctuations that standard control algorithms have difficulty with. Applications include wastewater treatment plants chlorination/dechlorination, cooling towers, vegetable and meat processing, and many other applications.

FRP Panel Type Water TanksFTC manufactures NSF 61 Annex G certified premium quality water tanks of the highest specification and hygiene standards in sizes from 1 m3 to 10,000 m3. The 1 m wide panels are available in 1 m, 1.5 m, and 2 m heights and are easily assembled on site. Find out what makes FTC tanks superior to concrete, steel and bolted glass-lined tanks.

Decanter Centrifuges for Sludge

Dewatering and ThickeningGEA Westfalia is a leading provider of decanters for sludge dewatering and thickening. We offer the widest range of centrifuge capacities from 20 to 5,600 litres per minute. Benefits include high G-forces, a positive drive system to reduce energy consumption, Varipond® for on-the-fly adjusting of the pond depth, a patented drive for high solids yield despite variations in feed conditions and advanced control technology for simplicity and safety.

MEDIA G2® FOR ARSENIC REMOVAL

For highly efficient, cost-effective arsenic removal treatment for drinking water, ADI’s patented water treatment technology is capable of reducing arsenic levels to less than 2 ppb, even from concentrations as high as 1200 ppb. ADI’s highly efficient, cost effective arsenic removal system consists of pressure vessels containing MEDIA G2®. Although the MEDIA G2® water treatment system was developed for adsorbing arsenic, it will also remove iron, manganese, chromium, uranium and other dissolved metals. ADI’s MEDIA G2® is a natural compound, not a synthetic compound. The media is either replaced or regenerated in-situ. Unlike other iron-based adsorbents, MEDIA G2® adsorption media can be regenerated 4 to 5 times, in a process which takes only a few hours. MEDIA G2® was the first adsorbent of its type to be certified by NSF International to Standard 61. It also complies with FDA regulations, and has been performance-verified by ETV Canada.

Muddy River Technologies is actively involved in the research and development of innovative water and wastewater treatment methods and equipment.

Muddy River uses proprietary technologies sold under the following brand names:

• Vertical Gravity Separators (VGS)

• Oil/Water Separators

• Liquid Skimmer

• Inline Swirl Generator (ISG) Hydrocyclones

• Liquid/Liquid and Solid/Liquid

• Micro Air Separation Systems (MASS)

Water Champ Chemical Induction SystemThe Water Champ FX Chemical Induction System features an innovative design and superior mixing characteristics.

The Water Champ’s ability to provide the mixing intensity needed to maximize chemical reaction while using less energy is second-to-none. The FX Series is configured for mounting in open-channel applications and can be easily retrofitted to existing basins and tanks. Provides gas feed up to 4,500 kg/day and liquid feed up to 230 LPM.

Emergency Toxic Gas Valve Closure SystemsThe Halogen Valve System is designed to automatically close valves on toxic gas containers to between 40 - 50 ft-lbs during an emergency. By minimizing the gas leak, the process can be back in operation quickly while maximizing safety for operators and the community. With a system fully compliant with the design recommendations of the Chlorine Institute and backed by a 3 year warranty, reliability matches safety with this highly engineered, cost effective solution.

Contact Nick Pecoskie Ontario Sales Manager

nick.pecoskie@indachem.com

1040 Martin Grove Road, Unit # 3 Toronto, ON M9W 4W4 Phone: (416) 743-3751 Fax: (416) 743-2038

www.indachem.com

What’s new?New WebsiteIndachem has launched a new website highlighting our full range of product lines available for the water and wastewater markets. The website is a great tool as a first step introduction to any one of our products and to highlight how Indachem can service our customers needs. Let us know what you think.

www.indachem.com

Polymer LaboratoryIndachem has opened a laboratory dedicated to polymer makedown optimization. We are now able to service design engineers by providing valuable information regarding polymer makedown including polymer concentration, polymer solution viscosity, mix time, and water temperature impact. All testing is summarized with a comprehensive report to enhance polymer makedown system design.

Please contact us at 416-743-3751 to learn more.

28 years and going strongIndachem is entering its 28th year in the water and wastewater equipment supply business. We want to take this time to thank all of our customers and suppliers who have played such a large part in the success of Indachem. We are always striving to exceed our customers’ expectations, learning more and improving along the way. We look forward to many more years servicing this great industry.