GEMÜ R629 eSyLite

further informationwebcode: GW-R629

GEMÜ R629 eSyLiteMotorized diaphragm valve

Features• Optional flow direction and installation position• Low space requirement due to compact design• Motorized alternative for applications without compressed air

supply• Optische Stellungsanzeige serienmäßig integriert• Insensitive to particulate media• Integrated emergency power supply module (optional)• Simple diaphragm replacement• Hermetic separation between medium and actuator• Installation for optimized draining is possible• Open/close function• Electric linear actuator

DescriptionThe GEMÜ R629 eSyLite 2/2-way diaphragm valve is motorized. It is available as an OPEN/CLOSE version. An integral opticalposition indicator is standard.

Technical specifications• Media temperature: 14 to 176 °F• Ambient temperature: 14 to 122 °F• Operating pressure: 0 to 90 psi• Nominal sizes: 1/2''“ (DN 12) to 2''“ (DN 50)• Body configurations: 2/2-way body• Connection standards: ANSI l ASTM l BS l DIN l EN l ISO l JIS• Body materials: ABS l Inliner PP-H, grey / outliner PP, reinforced l Inliner PP-H, natural / Outliner PP, reinforced l Inliner PVDF/

outliner PP, reinforced l PP, reinforced l PP-H, natural l PVC-U, grey l PVDF• Diaphragm materials: EPDM l FKM l NBR l PTFE/EPDM• Supply voltage: 24 V DC• Actuating speed: Max. 2 mm/s• Protection class: IP 65Technical data depends on the respective configuration

www.gemu-group.com2 / 29GEMÜ R629

Product description

Construction1

2

3

45

6

Item Name Materials

1 Optical position indicator PA 12

2 Manual override

3 Motorized actuator Polyamide 50% glass fibre

4 Diaphragm EPDM, FKM, NBR, PTFE / EPDM

5 Valve body Inliner PP-H, grey / outliner PP, reinforced | Inliner PP-H,natural / outliner PP, reinforced | Inliner PVDF / outlinerPP, reinforced | PVC-U, grey | ABS | PP | PP, reinforced |PP-H, natural | PVDF

6 Electrical connection

Product description

GEMÜ R629www.gemu-group.com 3 / 29

Availability

Availability of valve bodiesUnion end

Connection types code1)

7 7R 33 3M 3T 78

Material code 2) 5, 20, N5 1, 4, 71, 75 1 1, 4 1 1 5, 20, N5 71, 75

MG DN

10 DN 15 X X - X X - X -

20 DN 15 - X X X X X - X

DN 20 - X X X X X - X

DN 25 - X X X X X - X

25 32 - X X X X X - X

40 40 - X X X X X - X

50 - X X X X X - X

MG = diaphragm sizeX = Standard

1) Connection typeCode 7: Union end with insert (socket) – DINCode 7R: Union end with insert (Rp threaded socket) - DINCode 33: Union end with inch insert - BS (socket)Code 3M: Union end with inch insert – ASTM (socket)Code 3T: Union end with JIS insert (socket)Code 78: Union end with insert (for IR butt welding) – DIN

2) Valve body materialCode 1: PVC-U, greyCode 4: ABSCode 5: PP, reinforcedCode 20: PVDFCode 71: Inliner PP-H, grey, outliner PP, reinforcedCode 75: Inliner PVDF/outliner PP, reinforcedCode N5: PP-H, natural

Availability


Spigot

Connection types code 1) 0 20 28 30

Material code 2) 1, 71, 75 71, 75 20 1, 4

MG DN

10 DN 15 - - X -

20 DN 15 X X - X

DN 20 X X - X

DN 25 X X - X

25 32 X X - X

40 40 X X - X

50 X X - X


1) Connection typeCode 0: Spigot DINCode 20: Spigot for IR butt weldingCode 28: Spigot for IR butt welding, BCFCode 30: Imperial butt weld spigot

2) Valve body materialCode 1: PVC-U, greyCode 4: ABSCode 20: PVDFCode 71: Inliner PP-H, grey, outliner PP, reinforcedCode 75: Inliner PVDF/outliner PP, reinforced

Availability


Flange

Connection types code 1) 4 39

Material code 2) 1, 71, 75 1, 71, 75

MG DN

20 DN 15 X X

DN 20 X X

DN 25 X X

25 32 X X

40 40 X X

50 X X


1) Connection typeCode 4: Flange EN 1092, PN 10, form B, face-to-face dimension FTF EN 558 series 1, ISO 5752, basic series 1Code 39: Flange ANSI Class 125/150 RF, length only for body configuration D acc. to EN 558 series 1, ISO 5752, basic series 1

2) Valve body materialCode 1: PVC-U, greyCode 71: Inliner PP-H, grey, outliner PP, reinforcedCode 75: Inliner PVDF/outliner PP, reinforced

Flare

Connection types code 1) 75

Material code 2) N5

MG DN

10 12 -

15 X

20 X


1) Connection typeCode 75: Flare connection with PVDF union nut

2) Valve body materialCode N5: PP-H, natural

Threaded socket


Material code 2) 1, 5, 20

MG DN

10 12 X

15 -

20 -


1) Connection typeCode 1: Threaded socket DIN ISO 228

2) Valve body materialCode 1: PVC-U, greyCode 5: PP, reinforcedCode 20: PVDF

Availability


Solvent cement socket


Material code 2) 1

MG DN

10 12 X

15 -

20 -


1) Connection typeCode 2: Solvent cement socket DIN

2) Valve body materialCode 1: PVC-U, grey

Availability of mounting plateMaterial code 1)

MG DN

10 12 X

15 X

20 X

1) Valve body materialCode 20: PVDFCode N5: PP-H, natural

Availability

Order data

Order codesThe order data provide an overview of standard configurations.

Please check the availability before ordering. Other configurations available on request.

1 Type Code

Diaphragm valve, motorized,plastic diaphragm valve

R629

2 DN Code

DN 12 12

DN 15 15

DN 20 20

DN 25 25

DN 32 32

DN 40 40

DN 50 50

3 Body configuration Code

2/2-way body D

4 Connection type Code

Spigot DIN 0

Threaded socket DIN ISO 228 1

Solvent cement socket DIN 2

Flange EN 1092, PN 10, form B,face-to-face dimension FTF EN 558 series 1, ISO5752, basic series 1

4

Union end with insert (socket) – DIN 7

Union end with insert (Rp threaded socket) - DIN 7R

Spigot for IR butt welding 20

Spigot for IR butt welding, BCF 28

Imperial butt weld spigot 30

Union end with inch insert - BS (socket) 33

Flange ANSI Class 125/150 RF,length only for body configuration D acc. to EN 558series 1,ISO 5752, basic series 1

39

Union end with inch insert – ASTM (socket) 3M

Union end with JIS insert (socket) 3T

Flare connection with PVDF union nut 75

Union end with insert (for IR butt welding) – DIN 78

5 Valve body material Code

PVC-U, grey 1

ABS 4

PP, reinforced 5

PVDF 20

Inliner PP-H, grey,outliner PP, reinforced

71

Inliner PVDF/outliner PP, reinforced 75

5 Continuation of Valve body material Code

PP-H, natural N5

6 Diaphragm material Code

NBR 2

FKM 4

EPDM 29

PTFE/EPDM one-piece 54

7 Voltage/Frequency Code

24 V DC C1

8 Control module Code

Open/Close control (economy) A0

Open/Close control (economy)with emergency power supply module (NC)

A1

Open/Close control (economy)with emergency power supply module (NO)

A2

9 Actuator version Code

Actuator size 1diaphragm size 10

1C


1E


1F


3H

10 Mounting plate Code

With mounting plate M

Without mounting plate O

Standard

Order data


Order exampleOrder option Code Description

1 Type R629 Diaphragm valve, motorized,plastic diaphragm valve

2 DN 25 DN 25

3 Body configuration D 2/2-way body

4 Connection type 7 Union end with insert (socket) – DIN

5 Valve body material 1 PVC-U, grey

6 Diaphragm material 29 EPDM

7 Voltage/Frequency C1 24 V DC

8 Control module A0 Open/Close control (economy)

9 Actuator version 1E Actuator size 1diaphragm size 20

10 Mounting plate Standard

Order data



Technical data

MediumWorking medium: Corrosive, inert, gaseous and liquid media which have no negative impact on the physical and

chemical properties of the body and diaphragm material.The valve will seal in both flow directions up to full operating pressure (gauge pressure).

TemperatureMedia temperature: Valve body material Media temperature

PVC-U, grey (code 1) 50 — 140 °F

ABS (code 4) 14 — 140 °F

PP, reinforced (code 5) 41 — 176 °F

PVDF (code 20) 14 — 176 °F

Inliner PP-H grey / outliner PP, reinforced (code71)

41 — 176 °F

Inliner PVDF / outliner PP, reinforced (code 75) 14 — 176 °F

PP-H, natural (code N5) 41 — 176 °F

Ambient temperature: Valve body material Ambient temperature

PVC-U, grey (code 1) 50 — 122 °F

ABS (code 4) 14 — 122 °F

PP, reinforced (code 5) 41 — 122 °F

PVDF (code 20) 32 — 122 °F

Inliner PP-H grey / outliner PP, reinforced (code71)

41 — 122 °F

Inliner PVDF / outliner PP, reinforced (code 75) 23 — 122 °F

PP-H, natural (code N5) 41 — 122 °F

If the emergency power module is used (control module code A1, A2), the maximum ambient tem-perature is reduced to 104 °F.

PressureOperating pressure: 0 — 90 psi

All pressures are psi - gauge pressures. Operating pressure values were determined with static operating pres-sure applied on one side of a closed valve. Sealing at the valve seat and atmospheric sealing is ensured for thegiven values.Information on operating pressures applied on both sides and for high purity media on request.

The operating pressures apply at room temperature. In case of deviating temperatures, observe thepressure / temperature correlation.

Pressure rating: MG 10 PN 6MG 20 - 40 PN 10

Technical data


Pressure/temperature correlation:

Pressure/temperature correlation PN 6

Valve bodymaterial

Temperature in °F (valve body)

Material Code -10 ±0 5 10 20 25 30 40 50 60 70 80

PVC-U 1 - - - 87.02 87.02 87.02 69.62 52.21 30.46 13.05 - -

ABS 4 87.02 87.02 87.02 87.02 87.02 87.02 69.62 52.21 30.81 17.40 - -

PP 5 - - 87.02 87.02 87.02 87.02 87.02 87.02 79.77 58.02 39.16 21.76

PP-H 71 - - 87.02 87.02 87.02 87.02 87.02 87.02 79.77 58.02 39.16 21.76

PVDF 20 87.02 87.02 87.02 87.02 87.02 87.02 78.32 69.62 62.37 55.11 46.41 40.61

PVDF 75 87.02 87.02 87.02 87.02 87.02 87.02 87.02 87.02 87.02 87.02 78.32 68.17

PP-natu-ral

N5 - - 87.02 87.02 87.02 87.02 73.97 60.92 47.86 30.81 23.21 13.05

Pressure/temperature correlation PN 10

Valve bodymaterial

Temperature in °F (valve body)

Material Code -10 ±0 5 10 20 25 30 40 50 60 70 80

PVC-U 1 - - - 145.04

145.04

145.04

116.03

87.02 50.76 21.76 - -

ABS 4 145.04

145.04

145.04

145.04

145.04

145.04

116.03

87.02 58.02 29.01 - -

PP 5 - - 145.04

145.04

145.04

145.04

123.28

101.53

79.77 58.02 39.16 21.76

PP-H 71 - - 145.04

145.04

145.04

145.04

123.28

101.53

79.77 58.02 39.16 21.76

PVDF 20 145.04

145.04

145.04

145.04

145.04

145.04

130.53

116.03

101.53

91.37 78.32 68.17

PVDF 75 145.04

145.04

145.04

145.04

145.04

145.04

130.53

116.03

102.98

91.37 78.32 68.17

PP-natu-ral

N5 - - 145.04

145.04

145.04

145.04

123.28

101.53

79.77 58.02 39.16 21.76

The pressure rating (PN) depends on the diaphragm size.Data for extended temperature ranges on request. Please note that the ambient temperature and media temper-ature generate a combined temperature at the valve body which must not exceed the above values.

Technical data


Kv values: MG Nominal size Kv value

MG 10 DN 12 3.28

DN 15 4.10

DN 20 4.10

MG 20 DN 15 7.02

DN 20 11.70

DN 25 14.04

MG 25 DN 32 23.40

MG 40 DN 40 49.14

DN 50 53.82

Cv values in gpmMG = diaphragm sizeKv values determined acc.to DIN EN 60534 standard, inlet pressure 5 bar, Δp 1 bar, PVC-U valve body and softelastomer diaphragm.The Kv values for other product configurations (e.g. other diaphragm or body materials) may differ. In general,all diaphragms are subject to the influences of pressure, temperature, the process and their tightening torques.Therefore the Kv values may exceed the tolerance limits of the standard.The Kv value curve (Kv value dependent on valve stroke) can vary depending on the diaphragm material and du-ration of use.

Product complianceMachinery Directive: 2006/42/EC

Pressure Equipment Di-rective:

2014/68/EU

EMC Directive: 2014/30/EUTechnical standards used:Interference emission: DIN EN 61800-3Interference resistance: DIN EN 61326-1 (industrial processes)

DIN EN 61800-3

Food: FDA*USP* Class VI* depending on version and/or operating parameters

MaterialsMaterials: Diaphragm material O-ring material

PTFE FPM

NBR EPDM

FPM FPM

EPDM EPDM

Technical data


Mechanical dataProtection class: IP 65 acc. to EN 60529

Actuating speed: Max. 2 mm/s

Flow direction: Optional

Installation position: Optional

Weight: ActuatorMG 10: 1.76 lbMG 20: 1.94 lbMG 25: 2.07 lbMG 40: 3.09 lb

Body

Connectiontypes

Code 1)

0, 30 20 28 7, 7R 33 3M,3T

78 4, 39 1 75 2

MG DN

10 12 - - - - - - - - 0.18 - 0.13

15 - - 0.29 0.40 0.29 - - - - 0.18 -

20 - - - - - - - - - 0.28 -

20 15 0.12 0.10 - 0.17 0.24 0.26 0.27 0.67 - - -

20 0.13 0.12 - 0.21 0.28 0.30 0.36 0.84 - - -

25 0.16 0.14 - 0.26 0.33 0.38 0.37 1.28 - - -

25 32 0.22 0.18 - 0.40 0.70 0.73 0.63 1.89 - - -

40 40 0.50 0.40 - 0.73 0.83 0.93 1.13 2.36 - - -

50 0.57 0.47 - 1.00 1.40 1.50 1.60 3.08 - - -

Weight in lb

1) Connection typeCode 0: Spigot DINCode 1: Threaded socket DIN ISO 228Code 2: Solvent cement socket DINCode 3M: Union end with inch insert – ASTM (socket)Code 3T: Union end with JIS insert (socket)Code 4: Flange EN 1092, PN 10, form B, face-to-face dimension FTF EN 558 series 1, ISO 5752, basic series1Code 7: Union end with insert (socket) – DINCode 7R: Union end with insert (Rp threaded socket) - DINCode 20: Spigot for IR butt weldingCode 28: Spigot for IR butt welding, BCFCode 30: Imperial butt weld spigotCode 33: Union end with inch insert - BS (socket)Code 39: Flange ANSI Class 125/150 RF, length only for body configuration D acc. to EN 558 series 1, ISO5752, basic series 1Code 75: Flare connection with PVDF union nutCode 78: Union end with insert (for IR butt welding) – DIN

Duty cycle and service lifeService life: Class A acc. to EN 15714-2

Minimum 50,000 switching cycles at room temperature and permissible duty cycle.

Duty cycle: max. 30% duty

Technical data


Electrical dataSupply voltage: 24 V DC

Tolerance ± 10 %

Operating time: MG 10: 2.5 sMG 20: 3.5 sMG 25: 4.0 sMG 40: 4.5 s

Close tight current / ratedcurrent:

MG 10: 0.9 AMG 20: 1.4 AMG 25: 2.0 AMG 40: 2.3 A

Starting current / maxi-mum current:

MG 10: approx. 2.8 AMG 20: approx. 2.8 AMG 25: approx. 2.8 AMG 40: approx. 5.6 A

Standby current con-sumption:

approx. 10 mA

Digital input signalsInput voltage: max. 30 V DC

High level: ≥ 18 V DC

Low level: ≤ 5 V DC

Emergency power supply moduleCharging current: MG 10, MG 20, MG 25: max. 0.16 A

MG 40: 0.32 A

Charging time: approx. 13 min

Service life: Guide value at 25 °C ambient temperature, approx. 3 years

Technical data


Dimensions

Actuator dimensions

B2

A

A1

B1

B3

B

MG A A1 B B1 B2 B3

10 75.59 24.80 23.43 52.95 45.28 32.28

20 76.77 25.98 23.43 52.95 45.28 32.28

25 80.31 29.53 23.43 52.95 45.28 32.28

40 89.76 35.83 31.50 65.75 58.07 37.20

Dimensions in inchMG = diaphragm size* CT = A + H1 (see body dimensions)

Dimensions


Body dimensionsSpigot DIN / inch (code 0, 30)

L

c

Ød H

1

H

Connection type spigot DIN (Code 0) 1), body material PVC-U (Code 1), Inliner/Outliner (Code 71, 75) 2)

MG DN NPS c ød H H1 L

Material Material

1 71, 75 1 71, 75

20 15 1/2" 6.3 7.09 7.87 14.17 14.17 3.94 48.82

20 3/4" 7.48 7.48 9.84 14.96 14.96 4.72 56.69

25 1" 8.66 8.66 12.6 15.35 15.35 5.12 60.63

25 32 1¼" 12.6 12.6 15.75 16.14 16.14 5.91 68.5

40 40 1½" 13.78 10.24 19.69 24.88 24.88 9.13 76.38

50 2" 14.96 12.99 24.8 24.88 24.88 9.13 88.19

Connection type spigot inch (Code 30) 1), body material PVC-U (Code 1), ABS (Code 4) 2)

MG DN NPS c ød H H1 L

20 15 1/2" 9.45 8.43 14.17 3.94 55.51

20 3/4" 10.63 10.51 14.96 4.72 56.69

25 1" 11.81 13.23 15.35 5.12 60.63

25 32 1¼" 12.99 16.61 16.14 5.91 68.5

40 40 1½" 13.78 19.02 24.88 9.13 76.38

50 2" 15.75 23.74 24.88 9.13 88.19

Dimensions in inchMG = diaphragm size

1) Connection typeCode 0: Spigot DINCode 30: Imperial butt weld spigot

2) Valve body materialCode 1: PVC-U, greyCode 4: ABSCode 5: PP, reinforcedCode 20: PVDFCode 71: Inliner PP-H, grey, outliner PP, reinforcedCode 75: Inliner PVDF/outliner PP, reinforced

Dimensions


Spigot IR (code 20)

L

c

Ød H

1

H

s

Connection type spigot IR (Code 20) 1), body material Inliner/Outliner (Code 71, 75) 2)

MG DN NPS c ød H H1 L s

Material

71 75

20 15 1/2" 12.99 7.87 14.17 3.94 60.63 0.75 0.75

20 3/4" 12.99 9.84 14.96 4.72 60.63 0.91 0.75

25 1" 12.99 12.6 15.35 5.12 60.63 1.14 0.94

25 32 1¼" 12.99 15.75 16.14 5.91 76.38 1.46 0.94

40 40 1½" 12.99 19.69 24.88 9.13 76.38 1.81 1.18

50 2" 12.99 24.8 24.88 9.13 88.19 2.28 1.18


1) Connection typeCode 20: Spigot for IR butt welding

2) Valve body materialCode 71: Inliner PP-H, grey, outliner PP, reinforcedCode 75: Inliner PVDF/outliner PP, reinforced

Dimensions


Spigot (Code 28)

c1L

ød

H1

H

c

3

s

Connection type spigot (code 28) 1), body material PVDF (code 20) 2)

MG DN NPS c c1 ød H H1 L s

10 15 1/2'' 1.22 1.46 0.79 1.61 0.63 5.28 0.75


1) Connection typeCode 28: Spigot for IR butt welding, BCF

2) Valve body materialCode 20: PVDF

Dimensions


Union end DIN (Code 7)

L1

H1

H

L2

R

ØD

Ød

Connection type union end DIN (code 7) 1), body material PVC-U (code 1), PP (code 5). PVDF (code 20), PP-H (code N5), di-aphragm size 10 2)

MG DN NPS ød øD H H1 L1 L2 R

Material Material Material

1, 20 5, N5 1, 20 5, N5 1, 20 5, N5

10 15 1/2" 0.79 1.69 1.18 1.61 0.59 0.63 3.54 5.04 4.92 G 1

Connection type union end DIN (Code 7) 1), body material PVC (Code 1), ABS (Code 4), Inline/Outliner (Code 71, 75) 2),diaphragm size 20 – 40


Material

1 4 71 75

20 15 1/2" 7.87 16.93 14.17 3.94 42.52 57.48 59.06 56.3 57.48 G 1

20 3/4" 9.84 20.87 14.96 4.72 42.52 59.84 61.42 57.48 59.06 G 1¼

25 1" 12.6 23.62 15.35 5.12 45.67 65.35 66.93 62.2 63.78 G 1½

25 32 1¼" 15.75 29.13 16.14 5.91 52.76 75.59 77.17 71.26 72.44 G 2

40 40 1½" 19.69 32.68 24.88 9.13 60.63 87.4 87.4 81.5 82.68 G 2¼

50 2" 24.8 40.55 24.88 9.13 72.44 104.72 104.72 96.46 97.64 G 2¾


1) Connection typeCode 7: Union end with insert (socket) – DIN

2) Valve body materialCode 1: PVC-U, greyCode 4: ABSCode 5: PP, reinforcedCode 20: PVDFCode 71: Inliner PP-H, grey, outliner PP, reinforcedCode 75: Inliner PVDF/outliner PP, reinforcedCode N5: PP-H, natural

Dimensions


Union end inch (Code 33, 3M, 3T)

L1

H1

H

L2

R

ØD

Ød

Connection type Union end inch (Code 33) 1), body material PVC-U (Code 1) 2), diaphragm size 10


10 15 1/2'' 8.43 1.69 1.18 0.59 3.54 5.04 G1

Connection type Union end inch (Code 33, 3M, 3T) 1), body material PVC-U (Code 1) 2), diaphragm size 20 - 40


Connection type Connection type

33 3M 3T 33 3M 3T

20 15 1/2" 8.43 8.43 8.66 16.93 14.17 3.94 42.52 57.48 62.2 59.84 G 1

20 3/4" 10.55 10.51 10.24 20.87 14.96 4.72 42.52 59.84 64.57 59.84 G 1¼

25 1" 13.23 13.19 12.6 23.62 15.35 5.12 45.67 65.35 70.87 65.35 G 1½

25 32 1¼" 16.65 16.61 14.96 29.13 16.14 5.91 52.76 75.59 80.31 75.59 G 2

40 40 1½" 19.02 19.02 18.9 32.68 24.88 9.13 60.63 87.4 90.55 87.4 G 2¼

50 2" 23.78 23.78 23.62 40.55 24.88 9.13 72.44 103.94 104.72 104.72 G 2¾

Connection type BS (Code 33) 1), body material PVC-U (Code 4) 2)


20 15 1/2" 8.43 16.93 14.17 3.94 42.52 59.06 G 1

20 3/4" 10.55 20.87 14.96 4.72 42.52 61.42 G 1¼

25 1" 13.23 23.62 15.35 5.12 45.67 66.93 G 1½

25 32 1¼" 16.65 29.13 16.14 5.91 52.76 77.95 G 2

40 40 1½" 19.02 32.68 24.88 9.13 60.63 86.61 G 2¼

50 2" 23.78 40.55 24.88 9.13 72.44 103.94 G 2¾


1) Connection typeCode 33: Union end with inch insert - BS (socket)Code 3M: Union end with inch insert – ASTM (socket)Code 3T: Union end with JIS insert (socket)

2) Valve body materialCode 1: PVC-U, greyCode 4: ABS

Dimensions


Union end DIN, IR butt welding (Code 78)

ØD

Ød

L2

H H

1

R

L1

S

C

Connection type union end DIN, IR butt welding (code 78) 1), body materials PP (code 5), PVDF (code 20), PP-H (code N5) 2)

MG DN NPS c ød øD H H1 L1 L2 R s

Material Material

5 20, N5 5 20, N5

10 15 1/2" 1.42 0.79 1.65 1.18 1.61 0.59 0.63 3.54 7.72 0.04 0.75

Connection type union end DIN, IR butt welding (Code 78) 1), body material Inliner/Outliner (Code 71, 75) 2)

MG DN NPS c ød øD H H1 L1 L2 R s

Material

71 75

20 15 1/2" 36.0 20.0 16.93 14.17 3.94 42.52 214.0 G 1 1.9 1.9

20 3/4" 37.0 25.0 20.87 14.96 4.72 42.52 220.0 G 1¼ 2.3 1.9

25 1" 39.0 32.0 23.62 15.35 5.12 45.67 234.0 G 1½ 2.9 2.4

25 32 1¼" 39.0 40.0 29.13 16.14 5.91 52.76 258.0 G 2 3.7 2.4

40 40 1½" 43.0 50.0 32.68 24.88 9.13 60.63 284.0 G 2¼ 4.6 3.0

50 2" 43.0 63.0 40.55 24.88 9.13 72.44 320.0 G 2¾ 5.8 3.0


1) Connection typeCode 78: Union end with insert (for IR butt welding) – DIN

2) Valve body materialCode 5: PP, reinforcedCode 20: PVDFCode 71: Inliner PP-H, grey, outliner PP, reinforcedCode 75: Inliner PVDF/outliner PP, reinforcedCode N5: PP-H, natural

Dimensions


Union end Rp (code 7R)

D

L1

L2

R H

1 H

Rp

Connection type union end Rp (Code 7R) 1), body material PVC (Code 1) 2)

MG DN NPS øD H H1 L1 L2 R Rp

20 15 1/2" 16.93 14.17 3.94 42.52 146.0 G 1 1/2

20 3/4" 20.87 14.96 4.72 42.52 152.0 G 1¼ 3/4

25 1" 23.62 15.35 5.12 45.67 166.0 G 1½ 1

25 32 1¼" 29.13 16.14 5.91 52.76 192.0 G 2 1¼

40 40 1½" 32.68 24.88 9.13 60.63 222.0 G 2¼ 1½

50 2" 40.55 24.88 9.13 72.44 266.0 G 2¾ 2


1) Connection typeCode 7R: Union end with insert (Rp threaded socket) - DIN


Dimensions


Threaded socket (Code 1)

Lt

H

H1

R

Threaded socket (Code 1) 1), body material PVC-U (Code 1), PP (Code 5), PVDF (Code 20) 2)

MG DN NPS H H1 L R t

Material

1, 5 20

10 12 1/2" 10.83 12.4 4.92 2.17 G3/8 0.51


1) Connection typeCode 1: Threaded socket DIN ISO 228

2) Valve body materialCode 1: PVC-U, greyCode 5: PP, reinforcedCode 20: PVDF

Solvent cement socket (Code 2)

Lt

H

H1

øD

Connection type solvent cement socket (code 2) 1), body material PVC-U (code 1) 2)

MG DN NPS ø D H H1 L t

10 12 1/2" 0.63 10.83 4.92 21.65 0.51


1) Connection typeCode 2: Solvent cement socket DIN


Dimensions


Flange EN (code 4)

H1

H

FTF

ØD

Øk

Ød

ØL

Connection type Flange EN (Code 4) 1), body material PVC-U (Code 1) 2)

MG DN NPS ød øD FTF H H1 øk øL n

20 15 1/2" 17.72 37.4 51.18 14.17 3.94 25.59 5.51 4

20 3/4" 22.83 41.34 59.06 14.96 4.72 29.53 5.51 4

25 1" 26.77 45.28 62.99 15.35 5.12 33.46 5.51 4

25 32 1¼" 30.71 55.12 70.87 16.14 5.91 39.37 7.09 4

40 40 1½" 34.65 59.06 78.74 24.88 9.13 43.31 7.09 4

50 2" 40.16 64.96 90.55 24.88 9.13 49.21 7.09 4

Connection type Flange EN (Code 4) 1), body material Inliner/Outliner (Code 71, 75) 2)


20 15 1/2" 17.72 37.4 51.18 14.17 3.94 25.59 5.51 4

20 3/4" 22.83 41.34 59.06 14.96 4.72 29.53 5.51 4

25 1" 26.77 45.28 62.99 15.35 5.12 33.46 5.51 4

25 32 1¼" 30.71 55.12 70.87 16.14 5.91 39.37 7.09 4

40 40 2" 34.65 59.06 78.74 24.88 9.13 43.31 7.09 4

50 2" 40.16 64.96 90.55 24.88 9.13 49.21 7.09 4

Dimensions in inchMG = diaphragm sizen = number of bolts

1) Connection typeCode 4: Flange EN 1092, PN 10, form B, face-to-face dimension FTF EN 558 series 1, ISO 5752, basic series 1

2) Valve body materialCode 1: PVC-U, greyCode 5: PP, reinforcedCode 20: PVDFCode 71: Inliner PP-H, grey, outliner PP, reinforcedCode 75: Inliner PVDF/outliner PP, reinforced

Dimensions


Flange ANSI (Code 39)

H1

H

FTF

ØD

Øk

Ød

ØL

Connection type Flange ANSI (Code 39) 1), body material PVC-U (Code 1) 2)


20 15 1/2" 17.72 37.4 51.18 14.17 3.94 23.62 6.3 4

20 3/4" 21.26 41.34 59.06 14.96 4.72 27.56 6.3 4

25 1" 24.8 45.28 62.99 15.35 5.12 31.1 6.3 4

25 32 1¼" 28.74 55.12 70.87 16.14 5.91 35.04 6.3 4

40 40 1½" 32.28 59.06 78.74 24.88 9.13 38.58 6.3 4

50 2" 40.16 64.96 90.55 24.88 9.13 47.64 7.48 4

Connection type Flange ANSI (Code 39) 1), body material Inliner/Outliner (Code 71, 75) 2)


20 15 1/2" 17.72 37.4 51.18 14.17 3.94 23.62 6.3 4

20 3/4" 21.26 41.34 59.06 14.96 4.72 27.56 6.3 4

25 1" 24.8 45.28 62.99 15.35 5.12 31.1 6.3 4

25 32 1¼" 28.74 55.12 70.87 16.14 5.91 35.04 6.3 4

40 40 1½" 32.28 59.06 78.74 24.88 9.13 38.58 6.3 4

50 2" 40.16 64.96 90.55 24.88 9.13 47.64 7.48 4

Dimensions in inchMG = diaphragm sizen = number of bolts

1) Connection typeCode 39: Flange ANSI Class 125/150 RF, length only for body configuration D acc. to EN 558 series 1, ISO 5752, basic series 1

2) Valve body materialCode 1: PVC-U, greyCode 5: PP, reinforcedCode 20: PVDFCode 71: Inliner PP-H, grey, outliner PP, reinforcedCode 75: Inliner PVDF/outliner PP, reinforced

Dimensions


Flare (Code 75)

L

D H1

H

N2

N1

N3

Connection type Flare (code 75) 1), body material PP-H (code N5) 2)

MG DN NPS øD H H1 L N1 N2 øN3

10 15 1/2'' 10.43 15.00 3.94 51.97 15.75 24.41 2.17

20 3/4'' 10.43 17.52 5.91 52.76 15.75 24.41 2.17


1) Connection typeCode 75: Flare connection with PVDF union nut

2) Valve body materialCode N5: PP-H, natural

Valve body mounting

M

f

M

60

M

ff

MG 20, MG 25, MG 40MG 10

M M

f

f

Diaphragm size Nominal size M f

MG 10 DN 10 - 20 M5 35.0

MG 20 DN 15 - 25 M6 25.0

MG 25 DN 32 M6 25.0

MG 40 DN 40, DN 50 M8 44.5

Dimensions in inch

Dimensions


Mounting plate

HM

62

40

ø5,5

MG DN HM

10 12 5.0

15 4.5

20 4.5


Dimensions


Electrical connection

Electrical connection of actuatorPosition of the connectors

X1

Electrical connectionConnection X1

13 2

654

7-pin plug, Binder, type 693

Pin Signal name

1 24 V supply voltage

2 GND

3 Digital input OPEN

4 Digital input CLOSED

5 n. c.

6 n. c.

7 n. c.

Electrical connection


AccessoriesGEMÜ 1041

Mounting and compensating plateGEMÜ 1041 is a mounting and compensating plate which serves to mount and align GEMÜ plastic di-aphragm valves with union ends.

GEMÜ 1218

The GEMÜ 1218 is a connector (cable socket / cable plug), 7-pin. Straight and/or 90° angled plug type.

Ordering information

GEMÜ 1218 Binder connector

Connection X1 – supply voltage, relay outputs

Binder plug Mating connector 468/eSy series

Terminal compartment/screws,7-pin

88220649

Terminal compartment/screws,7-pin, 90°

88377714 1)

1) provided in the scope of delivery

Accessories

GEMÜ Gebr. Müller Apparatebau GmbH & Co. KGFritz-Müller-Straße 6-8, 74653 Ingelfingen-Criesbach, GermanyTel. +49 (0)7940 123-0 · [email protected]

| 03.

2021

| 88

6611

95

mailto:[email protected]

http://www.gemu-group.com

Documents

GEMÜ R629 eSyLite