ČKD Blansko SMALL HYDRO, s.r.o. is a member of JSC Tyazhmash group

COMPANY PRESENTATION

COMPANY HEADQUARTERSGellhornova 1, 678 18 Blansko, Czech Republic

www.ckdsh.cz

HISTORY

www.ckdsh.cz

ČKD Blansko is ranked among most traditional Czech engineering companies.

1698 – Origins of engineering manufacture1904 – Origins of water turbines manufacture1985 – New Hydraulic Laboratory has been put into operation2007 – ČKD Blansko Small Hydro foundation2010 – Integration to the JSC Tyazhmash Group

COMPANY ORGANIZATION CHART

www.ckdsh.cz

BASIC INFORMATION

www.ckdsh.cz

Number of Employees by 2013

Technical and Commercial Employees 32

Basic Design Dpt. 6

Detail Design Dpt. 9

Sales & Project Management Dpt. 7

Shop Workers 54

Total 86

Financial Indicators [EUR]

[2009] [2010] [2011] [2012] [2013]

Turnover 4.9 mil. 3.4 mil. 8.5 mil. 13.8 mil. 12.8 mil.

Contracted Amount 4.5 mil. 11.8 mil. 20.2 mil. 2.6 mil. 4.4 mil.

DESIGN DEPARTMENT

www.ckdsh.cz

STRUCTURE OF TECHNICAL SECTION• Managing and Administration• Development and Design of Water Turbines • Development and Design of Closing Valves• Development and Design of Governors• FEM Computation• Production Technology• Special Technology• Jigs Design Department

INTERNAL SUPPORT• Basic Design Department • Research and Development of Water Turbines• Hydraulic Laboratory

SOFTWARE - SolidWorks• 3D Design SolidWorks Professional

SolidWorks Premium SolidWorks DWGeditor

• FEM Computation SolidWorks Simulation • CNC Machinery SolidCAM • Data management SolidWorks Enterprise PDM

DEPARTMENT OF APPLIED MECHANICS

www.ckdsh.cz

Strength, stiffness and fatigue structural calculations (water turbines, valves, hydromechanical structures).

Finite Element Method (SolidWorks SimulationPremium) is used to determine structural stress and strain.

Methods of fracture mechanics are used for evaluation of strength and fatigue life.

WATER MACHINERY RESEARCH INSTITUT

www.ckdsh.cz

Development of turbine hydraulic profiles

Hydraulic testing laboratory

Calibration of flow meters

TESTING LABORATORY

www.ckdsh.cz

Q/H DIAGRAM

www.ckdsh.cz

KAPLAN TURBINES

www.ckdsh.cz

Head: 2 – 40 [m]

Output: 200 – 10 000+ [kW]

Diameter: 500 – 3 000+ [mm]

FRANCIS TURBINES

www.ckdsh.cz

Head: 10 – 300 [m]

Output: 200 – 40 000+ [kW]

Diameter: 400 – 1 700+ [mm]

PELTON TURBINES

www.ckdsh.cz

Head: 70 – 800 [m]

Output: 300 – 40 000+ [kW]

Diameter: 500 – 1 500+ [mm]

HYDRO-MECHANICAL EQUIPMENT

www.ckdsh.cz

INVESTMENTS IN TECHNOLOGY

www.ckdsh.cz

In operation: February 2011

Machine: CNC Floor Type Machining Centre FU – 150

CNC Floor Type Machining Center FU-150

www.ckdsh.cz

Technical Parameters:Working travel

x: 7 000 [mm]y: 1 500 [mm]z: 3 000 [mm]

Clamping Surface 3 400 x 4180 [mm]Capacity 25 000 [kg]

MANUFACTURE

www.ckdsh.cz

WELDING SHOP

ASSEMBLY AND SHOP TESTS

www.ckdsh.cz

SITE ERECTION

www.ckdsh.cz

FRONHAS HEPPCountry: PortugalCommissioned: 2008Type of Turbine: Horizontal FrancisTotal Output: 1 x 750 kW

Country: IndonesiaCommissioned: 2009Type of Turbine: Horizontal FrancisTotal Output: 2 x 1 500 kW

RANTE BALLA HEPP

AMPELGADING HEPPCountry: IndonesiaCommissioned: 2010Type of Turbine: Vertical FrancisTotal Output: 2 x 5 000 kW

www.ckdsh.cz

PATIKARI HEPPCountry: IndiaCommissioned: 2007Type of Turbine: Horizontal PeltonTotal Output: 2 x 9 459 kW

Country: PeruCommissioned: 2009Type of Turbine: Horizontal „S“ KaplanTotal Output: 2 x 5 000 kW

POECHOS 2 HEPP

ČESKÉ ÚDOLÍ HEPPCountry: Czech RepublicCommissioned: 2012Type of Turbine: Horizontal „S“ KaplanTotal Output: 1 x 233 kW

www.ckdsh.cz

LABSKÁ HEPPCountry: Czech RepublicCommissioned: 2009Type of Turbine: Vertical KaplanTotal Output: 1 x 500 kW

Country: ArmeniaCommissioned: 2011Type of Turbine: Horizontal PeltonTotal Output: 2 x 3 082 kW

TRGI 2 HEPP

ARCO IRIS HEPPCountry: MexicoCommissioned: 2013Type of Turbine: Vertical PeltonTotal Output: 2 x 4 700 kW

www.ckdsh.cz

CABULIG HEPPCountry: PhilippinesCommissioned: 2012Type of Turbine: Horizontal FrancisTotal Output: 2 x 4 700 kW

Country: SlovakiaCommissioned: (2013)Type of Turbine: Horizontal „PIT“ KaplanTotal Output: 1 x 995 kW

TEKOV HEPP

ORTACAG HEPPCountry: TurkeyCommissioned: 2013Type of Turbine: Vertical PeltonTotal Output: 1 x 13 280 kW

www.ckdsh.cz

TAHTAKORPU HEPPCountry: AzerbaijanCommissioned: (2013)Type of Turbine: Horizontal FrancisTotal Output: 3 x 10 627 kW

Country: TurkeyCommissioned: (2014)Type of Turbine: Vertical FrancisTotal Output: 2 x 5 661 kW

KAVSAKBENDI HEPP

KANDIL-1 HEPPCountry: TurkeyCommissioned: 2013Type of Turbine: Horizontal FrancisTotal Output: 1 x 4 719 kW

www.ckdsh.cz

ARAKLI-4 HEPPCountry: TurkeyCommissioned: 2013Type of Turbine: Horizontal PeltonTotal Output: 2 x 4 564 kW

Country: GreeceCommissioned: (2013)Type of Turbine: Horizontal FrancisTotal Output: 1 x 4 200 kW

ILARION HEPP

CUCUMACAYAN HEPPCountry: El SalvadorCommissioned: (2013)Type of Turbine: Vertical FrancisTotal Output: 2 x 2 940 kW

MAIN SUB-SUPPLIERS

www.ckdsh.cz

Inlet Equipment – Main Inlet Valves

Hydraulic Governing and Lube-Oil Units

Generators

Czech Republic Czech Republic

Spain Czech Republic Brazil, India

Czech Republic Czech Republic Czech Republic

Germany Hungary

www.ckdsh.cz

THANK YOUFOR YOUR ATTENTION

ČKD Blansko SMALL HYDRO, s.r.o.Gellhornova 1

678 18 BlanskoCzech Republic

E-mail: smallhydro@ckdblansko.czTel.: +420 516 402 724