Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
117
Geberit Monolith
6.1 Sanitary modules for WCs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
System overview Geberit Monolith for wall-hung washbasin . . . . . . . . . . . . . . .118
6.1.1 For wall-hung WCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
6.1.2 For floor-standing WCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122
6.1.3 For Geberit AquaClean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
6.1.4 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
6.2 Sanitary modules for washbasins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
6.2.1 For wall-mounted taps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
6.2.2 For deck-mounted taps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
6.2.3 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
6.3 Sanitary modules for bidets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
6.3.1 For wall-hung and floor-standing bidets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
6. Geberit Monolith
Geberit MonolithSanitary modules for WCs For wall-hung WCs
118
6.1 Sanitary modules for WCs
Wall-mounted tap Counter top tap
Mixer right
bore holes: 10 cm
Mixer left
bore holes: 8 cm
Service opening with openings
for flexible hoses
Mixer / Specification
815
732
104
1145
13−45
8−16
0−2310
≥ 30
R½
815
732
104
1145
13−45
8−16
0−238
≥ 30
R½
815
732
1145
13−45
8−16
0−23
≥ 30
R½
Tap producerHansGrohe / Axor
Hansa / KWC Dornbracht / V&B
Vola all
Drawer left 131.040.xx.1 131.044.xx.1 131.048.xx.1
Drawer right 131.041.xx.1 131.045.xx.1 131.049.xx.1
Drawer left & right 131.042.xx.1 131.046.xx.1 131.050.xx.1
Without drawers 131.043.xx.1 131.047.xx.1 131.051.xx.1
6.1.1 For wall-hung WCs
0
908
485R½
101
18/23
25
47 413 4 13 4
106
43
0
Application purposes• For renovations, conversions and new buildings• For wall inlets with inlet height > 23 cm• For replacing wall-hung WCs with close-coupled exposed
cisterns• For connecting Geberit AquaClean Sela• For connecting Geberit AquaClean Mera• For mounting on finished floors• For installation in front of solid walls
Characteristics• Dual flush• Compensation of dimensional tolerances possible• Front cladding made of glass (ESG)• Fastening height WC ceramic appliance 35 ± 1 cm• Cistern fully insulated against condensation• Side cladding made of aluminium brushed• Self-supporting• Adjustable flush volume• Side connection possible• Water supply connection on the bottom
Technical data
Flow pressure 0.1-10 bar
Flush volume factory setting 6 and 3 l
Flush volume large adjustment range 4.5 / 6 l
Flush volume small 3 l
Scope of delivery• Water supply connection set with 2 angle stop valves, 1/2“• Flush bend 90° made of ABS, ø 50/44 mm, 23 x 23 cm• Sleeve made of EPDM, ø 44/55 mm• Straight connector made of PE-HD, ø 90 mm• Adapter socket made of PE-HD, ø 90/110 mm• 2 threaded rods M12• Sound insulation set• Fastening material for solid wall
Art. no. Colour / Surface
131.021.SI.1 white glass
131.021.SJ.1 black glass
131.021.SL.1 mint glass
131.021.SQ.1 umber glass
Geberit Monolith sanitary module for wall-hung WC, 101 cm, with straight connector, water supply connection at the bottom
System overview Geberit Monolith for wall-hung washbasin
Geberit MonolithSanitary modules for WCsFor wall-hung WCs
119
0
485
908R½
45 ±2
25 ±1
13 ±413 ±4
33
38
101 ±1
R½
18/23
106
0
43 ±2
Application purposes• For renovations, conversions and new buildings• For wall inlets with inlet height > 23 cm• For replacing wall-hung WCs with close-coupled exposed
cisterns• For connecting Geberit AquaClean Sela• For connecting Geberit AquaClean Mera• For mounting on finished floors• For installation in front of solid walls
Characteristics• Dual flush• Compensation of dimensional tolerances possible• Front cladding made of glass (ESG)• Fastening height WC ceramic appliance 35 ± 1 cm• Cistern fully insulated against condensation• Side cladding made of aluminium brushed• Self-supporting• Adjustable flush volume• Side connection possible• Water supply connection on the bottom• Soft-touch buttons for flush actuation and odour extraction• Orientation light and odour extraction activated when a user
approaches• Orientation light can be set in seven colours• Day/night detection can be set for orientation light• Odour extraction unit with filtration, integrated in the concealed
cistern• Odour extraction unit automatically switches off after a
predefined running time• Operation with extra-low voltage, no mains voltage in cistern
Technical data
Protection class I
Protection degree IPX4
Nominal voltage 100-240 V AC
Mains frequency 50-60 Hz
Operating voltage 4.1 V DC
Power consumption 5 W
Flow pressure 0.1-10 bar
Flush volume factory setting 6 and 3 l
Flush volume large adjustment range 4.5 / 6 l
Flush volume small 3 l
Scope of delivery• Water supply connection set with 2 angle stop valves, 1/2“• Flush bend 90° made of ABS, ø 50/44 mm, 23 x 23 cm• Sleeve made of EPDM, ø 44/55 mm• Straight connector made of PE-HD, ø 90 mm• Adapter socket made of PE-HD, ø 90/110 mm• 2 threaded rods M12• Sound insulation set• Female socket for mains connection• Power supply unit• Fastening material for solid wall
Art. no. Colour / Surface
131.221.SI.1 white glass
131.221.SJ.1 black glass
131.221.SQ.1 umber glass
Accessories• Geberit outlet mounting box → p. 280
Geberit Monolith Plus sanitary module for wall-hung WC, 101 cm, with straight connector, water supply connection at the bottom
Geberit MonolithSanitary modules for WCs For wall-hung WCs
120
0
505
1145
25
R½
18
30
92−102
104
106
43
0
109
Application purposes• For renovations, conversions and new buildings• For wall inlets with inlet height > 23 cm• For replacing wall-hung WCs with close-coupled exposed
cisterns• For replacing wall-hung WCs with pressure flushing valve• For replacing wall-hung WCs with concealed cistern with
maximum service opening height < 109 cm• For connecting Geberit AquaClean Sela• For connecting Geberit AquaClean Mera• For mounting on finished floors• For installation in front of solid walls
Characteristics• Dual flush• Compensation of dimensional tolerances possible• Front cladding made of glass (ESG)• Fastening height WC ceramic appliance 35 ± 1 cm• Cistern fully insulated against condensation• Side cladding made of aluminium brushed• Self-supporting• Adjustable flush volume• Water supply connection at the rear centre• Side connection possible• Bottom connection possible
Technical data
Flow pressure 0.1-10 bar
Flush volume factory setting 6 and 3 l
Flush volume large adjustment range 4.5 / 6 l
Flush volume small 3 l
Scope of delivery• Water supply connection set with 2 angle stop valves, 1/2“• Flush bend 90° made of ABS, ø 50/44 mm, 23 x 23 cm• Sleeve made of EPDM, ø 44/55 mm• Straight connector made of PE-HD, ø 90 mm• Adapter socket made of PE-HD, ø 90/110 mm• 2 threaded rods M12• Sound insulation set• Fastening material for solid wall
Art. no. Colour / Surface
131.031.SI.1 white glass
131.031.SJ.1 black glass
131.031.SQ.1 umber glass
Accessories• Water supply connection set, bottom, for Geberit Monolith
sanitary module for WC, 114 cm → p. 130• Geberit set straight connector for wall-hung WC, stepped by
3 cm → p. 130• Set of leg supports for Geberit Monolith sanitary module for WC
→ p. 131
Geberit Monolith sanitary module for wall-hung WC, 114 cm, with straight connector, water supply connection at the rear centre
Geberit MonolithSanitary modules for WCsFor wall-hung WCs
121
0
505
25 ±1
1145 ±1
18
45 ±213 ±413 ±4
33
38
R½
12
92–102
102
6
106
0
109
43 ±2
Application purposes• For renovations, conversions and new buildings• For wall inlets with inlet height > 23 cm• For replacing wall-hung WCs with close-coupled exposed
cisterns• For replacing wall-hung WCs with pressure flushing valve with
additional water supply connection set• For replacing wall-hung WCs with concealed cistern with
maximum service opening height < 109 cm• For connecting Geberit AquaClean Sela• For connecting Geberit AquaClean Mera• For mounting on finished floors• For installation in front of solid walls
Characteristics• Dual flush• Compensation of dimensional tolerances possible• Front cladding made of glass (ESG)• Fastening height WC ceramic appliance 35 ± 1 cm• Cistern fully insulated against condensation• Side cladding made of aluminium brushed• Self-supporting• Adjustable flush volume• Water supply connection at the rear centre• Side connection possible• Bottom connection possible• Soft-touch buttons for flush actuation and odour extraction• Orientation light and odour extraction activated when a user
approaches• Orientation light can be set in seven colours• Day/night detection can be set for orientation light• Odour extraction unit with filtration, integrated in the concealed
cistern• Odour extraction unit automatically switches off after a
predefined running time• Operation with extra-low voltage, no mains voltage in cistern
Technical data
Protection class I
Protection degree IPX4
Nominal voltage 100-240 V AC
Mains frequency 50-60 Hz
Operating voltage 4.1 V DC
Power consumption 5 W
Flow pressure 0.1-10 bar
Flush volume factory setting 6 and 3 l
Flush volume large adjustment range 4.5 / 6 l
Flush volume small 3 l
Scope of delivery• Water supply connection set with 2 angle stop valves, 1/2“• Flush bend 90° made of ABS, ø 50/44 mm, 23 x 23 cm• Sleeve made of EPDM, ø 44/55 mm• Straight connector made of PE-HD, ø 90 mm• Adapter socket made of PE-HD, ø 90/110 mm• 2 threaded rods M12• Sound insulation set• Female socket for mains connection• Power supply unit• Fastening material for solid wall
Art. no. Colour / Surface
131.231.SI.1 white glass
131.231.SJ.1 black glass
131.231.SQ.1 umber glass
Accessories• Water supply connection set, bottom, for Geberit Monolith
sanitary module for WC, 114 cm → p. 130• Geberit outlet mounting box → p. 280
Geberit Monolith Plus sanitary module for wall-hung WC, 114 cm, with straight connector, water supply connection at the rear centre
Geberit MonolithSanitary modules for WCs For floor-standing WCs
122
6.1.2 For floor-standing WCs
485
0
908R½
13 ±413 ±4
18 ±1
32–36
47 ±4
101 ±1
106
0
Application purposes• For floor inlets• For renovations, conversions and new buildings• For wall inlets with an inlet height of 18 cm• For floor-standing WCs with P-bend and flush water inlet height
32–36 cm above the floor (EN 33)• For replacing low-level exposed cisterns• For replacing floor-standing WCs with close-coupled exposed
cistern• For mounting on finished floors• For installation in front of solid walls
Characteristics• Dual flush• Compensation of dimensional tolerances possible• Front cladding made of glass (ESG)• Cistern fully insulated against condensation• Side cladding made of aluminium brushed• Self-supporting• Adjustable flush volume• Side connection possible• Water supply connection on the bottom
Technical data
Flow pressure 0.1-10 bar
Flush volume factory setting 6 and 3 l
Flush volume large adjustment range 4.5 / 6 l
Flush volume small 3 l
Scope of delivery• Water supply connection set with 2 angle stop valves, 1/2“• Flush bend 90° made of ABS, ø 50/44 mm, 23 x 23 cm• Sleeve made of EPDM, ø 44/55 mm• Straight connector made of PE-HD, ø 90 mm• Adapter socket made of PE-HD, ø 90/110 mm• Fastening material for solid wall
Art. no. Colour / Surface
131.001.SI.1 white glass
131.001.SJ.1 black glass
131.001.SL.1 mint glass
131.001.SQ.1 umber glass
Geberit Monolith sanitary module for floor-standing WC, 101 cm, with connection bend 90°, water supply connection at the bottom
Geberit MonolithSanitary modules for WCsFor floor-standing WCs
123
0
485
908R½
45 ±2
18 ±1
13 ±413 ±4
33
38
101 ±1
R½
32–36
106
0
Application purposes• For floor inlets• For renovations, conversions and new buildings• For wall inlets with an inlet height of 18 cm• For floor-standing WCs with P-bend and flush water inlet height
32–36 cm above the floor (EN 33)• For replacing low-level exposed cisterns• For replacing floor-standing WCs with close-coupled exposed
cistern• For mounting on finished floors• For installation in front of solid walls
Characteristics• Dual flush• Compensation of dimensional tolerances possible• Front cladding made of glass (ESG)• Cistern fully insulated against condensation• Side cladding made of aluminium brushed• Self-supporting• Adjustable flush volume• Side connection possible• Water supply connection on the bottom• Soft-touch buttons for flush actuation and odour extraction• Orientation light and odour extraction activated when a user
approaches• Orientation light can be set in seven colours• Day/night detection can be set for orientation light• Odour extraction unit with filtration, integrated in the concealed
cistern• Odour extraction unit automatically switches off after a
predefined running time• Operation with extra-low voltage, no mains voltage in cistern
Technical data
Protection class I
Protection degree IPX4
Nominal voltage 100-240 V AC
Mains frequency 50-60 Hz
Operating voltage 4.1 V DC
Power consumption 5 W
Flow pressure 0.1-10 bar
Flush volume factory setting 6 and 3 l
Flush volume large adjustment range 4.5 / 6 l
Flush volume small 3 l
Scope of delivery• Water supply connection set with 2 angle stop valves, 1/2“• Flush bend 90° made of ABS, ø 50/44 mm, 23 x 23 cm• Sleeve made of EPDM, ø 44/55 mm• Straight connector made of PE-HD, ø 90 mm• Adapter socket made of PE-HD, ø 90/110 mm• Female socket for mains connection• Power supply unit• Fastening material for solid wall
Art. no. Colour / Surface
131.201.SI.1 white glass
131.201.SJ.1 black glass
131.201.SQ.1 umber glass
Accessories• Geberit outlet mounting box → p. 280
Geberit Monolith Plus sanitary module for floor-standing WC, 101 cm, with connection bend 90°, water supply connection at the bottom
Geberit MonolithSanitary modules for WCs For floor-standing WCs
124
0
505
104
R½
30
1145 ±1
32–36
92–102
18 ±1
106
0
109
Application purposes• For floor inlets• For renovations, conversions and new buildings• For wall inlets with an inlet height of 18 cm• For replacing floor-standing WCs with concealed cistern with
maximum service opening height < 109 cm• For replacing half-high level exposed cisterns• For replacing floor-standing WCs with close-coupled exposed
cistern• For replacing pressure flushing valves• For mounting on finished floors• For installation in front of solid walls
Characteristics• Dual flush• Compensation of dimensional tolerances possible• Front cladding made of glass (ESG)• Cistern fully insulated against condensation• Side cladding made of aluminium brushed• Self-supporting• Adjustable flush volume• Water supply connection at the rear centre• Side connection possible• Bottom connection possible
Technical data
Flow pressure 0.1-10 bar
Flush volume factory setting 6 and 3 l
Flush volume large adjustment range 4.5 / 6 l
Flush volume small 3 l
Scope of delivery• Water supply connection set with 2 angle stop valves, 1/2“• Flush bend 90° made of ABS, ø 50/44 mm, 23 x 23 cm• Connection bend made of PP, ø 90 mm• Sleeve made of EPDM, ø 44/55 mm• Adapter socket made of PE-HD, ø 90/110 mm• Fastening material for solid wall
Art. no. Colour / Surface
131.033.SI.1 white glass
131.033.SJ.1 black glass
131.033.SQ.1 umber glass
Accessories• Water supply connection set, bottom, for Geberit Monolith
sanitary module for WC, 114 cm → p. 130
Geberit Monolith sanitary module for floor-standing WC, 114 cm, with P-bend, water supply connection at the rear centre
Geberit MonolithSanitary modules for WCsFor floor-standing WCs
125
0
505
R½18 ±1
45 ±2 13 ±413 ±4 1145 ±1
33
38
32–36
12
92–102
102
6
106
0
109
Application purposes• For floor inlets• For renovations, conversions and new buildings• For wall inlets with an inlet height of 18 cm• For replacing floor-standing WCs with concealed cistern with
maximum service opening height < 109 cm• For replacing half-high level exposed cisterns• For replacing floor-standing WCs with close-coupled exposed
cistern• For replacing pressure flushing valves• For mounting on finished floors• For installation in front of solid walls
Characteristics• Dual flush• Compensation of dimensional tolerances possible• Front cladding made of glass (ESG)• Cistern fully insulated against condensation• Side cladding made of aluminium brushed• Self-supporting• Adjustable flush volume• Water supply connection at the rear centre• Side connection possible• Bottom connection possible• Soft-touch buttons for flush actuation and odour extraction• Orientation light and odour extraction activated when a user
approaches• Orientation light can be set in seven colours• Day/night detection can be set for orientation light• Odour extraction unit with filtration, integrated in the concealed
cistern• Odour extraction unit automatically switches off after a
predefined running time• Operation with extra-low voltage, no mains voltage in cistern
Technical data
Protection class I
Protection degree IPX4
Nominal voltage 100-240 V AC
Mains frequency 50-60 Hz
Operating voltage 4.1 V DC
Power consumption 5 W
Flow pressure 0.1-10 bar
Flush volume factory setting 6 and 3 l
Flush volume large adjustment range 4.5 / 6 l
Flush volume small 3 l
Scope of delivery• Water supply connection set with 2 angle stop valves, 1/2“• Flush bend 90° made of ABS, ø 50/44 mm, 23 x 23 cm• Connection bend made of PP, ø 90 mm• Sleeve made of EPDM, ø 44/55 mm• Adapter socket made of PE-HD, ø 90/110 mm• Female socket for mains connection• Power supply unit• Fastening material for solid wall
Art. no. Colour / Surface
131.233.SI.1 white glass
131.233.SJ.1 black glass
131.233.SQ.1 umber glass
Accessories• Water supply connection set, bottom, for Geberit Monolith
sanitary module for WC, 114 cm → p. 130• Geberit outlet mounting box → p. 280
Geberit Monolith Plus sanitary module for floor-standing WC, 114 cm, with P-bend, water supply connection at the rear centre
Geberit MonolithSanitary modules for WCs For Geberit AquaClean
126
6.1.3 For Geberit AquaClean
0
908
485R½
101
25
15
2818
13 4 13 447 4
106
455
0
25
Application purposes• For renovations, conversions and new buildings• For wall inlets with inlet height > 23 cm• For replacing wall-hung WCs with close-coupled exposed
cisterns• For mounting on finished floors• For installation in front of solid walls
Characteristics• Dual flush• Compensation of dimensional tolerances possible• Front cladding made of glass (ESG)• Fastening height WC ceramic appliance 35 ± 1 cm• Cistern fully insulated against condensation• Side cladding made of aluminium brushed• Self-supporting• Adjustable flush volume• Side connection possible• Water supply connection on the bottom
Technical data
Flow pressure 0.1-10 bar
Flush volume factory setting 6 and 3 l
Flush volume large adjustment range 4.5 / 6 l
Flush volume small 3 l
Scope of delivery• Water supply connection set with 2 angle stop valves, 1/2“• Flush bend 90° made of ABS, ø 50/44 mm, 23 x 23 cm• Sleeve made of EPDM, ø 44/55 mm• Straight connector made of PE-HD, ø 90 mm• Adapter socket made of PE-HD, ø 90/110 mm• 2 threaded rods M12• Sound insulation set• Fastening material for solid wall
Art. no. Colour / Surface
131.024.SI.1 white glass
131.024.SJ.1 black glass
131.024.SQ.1 umber glass
Geberit Monolith sanitary module for Geberit AquaClean 8000 / 8000plus, 101 cm, with straight connector, water supply connection at the bottom
Geberit MonolithSanitary modules for WCsFor Geberit AquaClean
127
28
15
180
485
908R½
45 ±2101 ±1
25 ±1
13 ±413 ±4
106
455
0
25
Application purposes• For renovations, conversions and new buildings• For wall inlets with inlet height > 23 cm• For replacing wall-hung WCs with close-coupled exposed
cisterns• For mounting on finished floors• For installation in front of solid walls
Characteristics• Dual flush• Compensation of dimensional tolerances possible• Front cladding made of glass (ESG)• Fastening height WC ceramic appliance 35 ± 1 cm• Cistern fully insulated against condensation• Side cladding made of aluminium brushed• Self-supporting• Adjustable flush volume• Side connection possible• Water supply connection on the bottom• Soft-touch buttons for flush actuation and odour extraction• Orientation light and odour extraction activated when a user
approaches• Orientation light can be set in seven colours• Day/night detection can be set for orientation light• Odour extraction unit with filtration, integrated in the concealed
cistern• Odour extraction unit automatically switches off after a
predefined running time• Operation with extra-low voltage, no mains voltage in cistern
Technical data
Protection class I
Protection degree IPX4
Nominal voltage 100-240 V AC
Mains frequency 50-60 Hz
Operating voltage 4.1 V DC
Power consumption 5 W
Flow pressure 0.1-10 bar
Flush volume factory setting 6 and 3 l
Flush volume large adjustment range 4.5 / 6 l
Flush volume small 3 l
Scope of delivery• Water supply connection set with 2 angle stop valves, 1/2“• Flush bend 90° made of ABS, ø 50/44 mm, 23 x 23 cm• Sleeve made of EPDM, ø 44/55 mm• Straight connector made of PE-HD, ø 90 mm• Adapter socket made of PE-HD, ø 90/110 mm• 2 threaded rods M12• Sound insulation set• Female socket for mains connection• Power supply unit• Fastening material for solid wall
Art. no. Colour / Surface
131.224.SI.1 white glass
131.224.SJ.1 black glass
131.224.SQ.1 umber glass
Accessories• Geberit set straight connector for wall-hung WC, stepped by
3 cm → p. 130• Set of leg supports for Geberit Monolith sanitary module for WC
→ p. 131• Geberit outlet mounting box → p. 280
Geberit Monolith Plus sanitary module for Geberit AquaClean 8000 / 8000plus, 101 cm, with straight connector, water supply connection at the bottom
Geberit MonolithSanitary modules for WCs For Geberit AquaClean
128
0
505
R½
18
30
25
15
28
92−102
104
1145
106
455
25
0
109
Application purposes• For renovations, conversions and new buildings• For wall inlets with inlet height > 23 cm• For replacing wall-hung WCs with close-coupled exposed
cisterns• For replacing wall-hung WCs with pressure flushing valve• For replacing wall-hung WCs with concealed cistern with
maximum service opening height < 109 cm• For mounting on finished floors• For installation in front of solid walls
Characteristics• Dual flush• Compensation of dimensional tolerances possible• Front cladding made of glass (ESG)• Fastening height WC ceramic appliance 35 ± 1 cm• Cistern fully insulated against condensation• Side cladding made of aluminium brushed• Self-supporting• Adjustable flush volume• Water supply connection at the rear centre• Side connection possible• Bottom connection possible
Technical data
Flow pressure 0.1-10 bar
Flush volume factory setting 6 and 3 l
Flush volume large adjustment range 4.5 / 6 l
Flush volume small 3 l
Scope of delivery• Water supply connection set with angle stop valve R 1/2• Flush bend 90° made of ABS, ø 50/44 mm, 23 x 23 cm• Sleeve made of EPDM, ø 44/55 mm• Straight connector made of PE-HD, ø 90 mm• Adapter socket made of PE-HD, ø 90/110 mm• 2 threaded rods M12• Sound insulation set• Fastening material for solid wall
Art. no. Colour / Surface
131.032.SI.1 white glass
131.032.SJ.1 black glass
131.032.SQ.1 umber glass
Accessories• Water supply connection set, bottom, for Geberit Monolith
sanitary module for WC, 114 cm → p. 130• Geberit set straight connector for wall-hung WC, stepped by
3 cm → p. 130• Set of leg supports for Geberit Monolith sanitary module for WC
→ p. 131
Geberit Monolith sanitary module for Geberit AquaClean 8000 / 8000plus, 114 cm, with straight connector, water supply connection at the rear centre
Geberit MonolithSanitary modules for WCsFor Geberit AquaClean
129
0
505
R½
15
28
25 ±1
1145 ±1
18
45 ±213 ±413 ±4
12
92–102
102
6
106
109
455
25
0
Application purposes• For renovations, conversions and new buildings• For wall inlets with inlet height > 23 cm• For replacing wall-hung WCs with close-coupled exposed
cisterns• For replacing wall-hung WCs with pressure flushing valve with
additional water supply connection set• For replacing wall-hung WCs with concealed cistern with
maximum service opening height < 109 cm• For mounting on finished floors• For installation in front of solid walls
Characteristics• Dual flush• Compensation of dimensional tolerances possible• Front cladding made of glass (ESG)• Fastening height WC ceramic appliance 35 ± 1 cm• Cistern fully insulated against condensation• Side cladding made of aluminium brushed• Self-supporting• Adjustable flush volume• Water supply connection at the rear centre• Side connection possible• Bottom connection possible• Soft-touch buttons for flush actuation and odour extraction• Orientation light and odour extraction activated when a user
approaches• Orientation light can be set in seven colours• Day/night detection can be set for orientation light• Odour extraction unit with filtration, integrated in the concealed
cistern• Odour extraction unit automatically switches off after a
predefined running time• Operation with extra-low voltage, no mains voltage in cistern
Technical data
Protection class I
Protection degree IPX4
Nominal voltage 100-240 V AC
Mains frequency 50-60 Hz
Operating voltage 4.1 V DC
Power consumption 5 W
Flow pressure 0.1-10 bar
Flush volume factory setting 6 and 3 l
Flush volume large adjustment range 4.5 / 6 l
Flush volume small 3 l
Scope of delivery• Water supply connection set with angle stop valve R 1/2• Flush bend 90° made of ABS, ø 50/44 mm, 23 x 23 cm• Sleeve made of EPDM, ø 44/55 mm• Straight connector made of PE-HD, ø 90 mm• Adapter socket made of PE-HD, ø 90/110 mm• 2 threaded rods M12• Sound insulation set• Female socket for mains connection• Power supply unit• Fastening material for solid wall
Art. no. Colour / Surface
131.232.SI.1 white glass
131.232.SJ.1 black glass
131.232.SQ.1 umber glass
Accessories• Geberit outlet mounting box → p. 280• Water supply connection set, bottom, for Geberit Monolith
sanitary module for WC, 114 cm → p. 130
Geberit Monolith Plus sanitary module for Geberit AquaClean 8000 / 8000plus, 114 cm, with straight connector, water supply connection at the rear centre
Geberit MonolithSanitary modules for WCs Accessories
130
6.1.4 Accessories
Scope of delivery• Angle stop valve, 1/2“• Reinforced braided hose, 3/8“• Fitting piece• Collar, chrome-plated• Connecting bend made of copper, chrome-plated• 2 cone screw fittings• Connecting nipple, offset
Art. no. Colour / Surface
131.071.21.1 bright chrome-plated
Water supply connection set, left/right, for Geberit Monolith sanitary module for WC
Scope of delivery• Reinforced braided hose, 1/2“• Reducer, 1/2“–3/8“
Art. no.
131.138.00.1
Water supply connection set, bottom, for Geberit Monolith sanitary module for WC, 114 cm
L
d
l
102±5
Application purposes• For connecting floor-standing WCs to wall drains
Scope of delivery• Sleeve made of EPDM• Straight connector made of PE-HD, ø 90 mm
Art. no. d, ø [mm]
L [cm]
l [cm]
131.083.16.1 90 30 26.5
Geberit set straight connector for floor-standing WC
Application purposes• For compensating the offset between WC connections and wall
drains
Scope of delivery• Straight connector made of PP, ø 90 mm, stepped by 3 cm• Sleeve made of EPDM
Art. no. Colour / Surface
131.085.11.1 white alpine
Geberit set straight connector for wall-hung WC, stepped by 3 cm
Application purposes• For compensating the offset between WC connections and wall
drains• For converting of floor-standing WCs with wall inlet to Geberit
Monolith sanitary modules with wall-hung WC• For laying wall inlets from 18 cm to 25 cm above finished floor
Scope of delivery• 2 sleeves made of EPDM• Straight connector made of PP, ø 90 mm, stepped by 7 cm
Art. no. Colour / Surface
131.108.11.1 white alpine
Geberit set straight connector for wall-hung WC, stepped by 7 cm
Application purposes• For connecting floor-standing WCs to floor drains• For floor drains with wall distance < 15 cm
Scope of delivery• Sleeve made of EPDM• Straight connector made of PE-HD, ø 90 mm• Adapter socket made of PE-HD, ø 90/110 mm• Fastening material
Art. no.
131.082.16.1
Geberit set connection bend 90° for floor-standing WC
Geberit MonolithSanitary modules for WCsAccessories
131
105
263
2
15
Application purposes• For connecting floor-standing WCs to floor drains• For floor drains with wall distance > 15 cm
Scope of delivery• Sleeve made of EPDM• Connection bend made of PP, ø 90 mm• Adapter socket made of PE-HD, ø 90/110 mm• Fastening material
Art. no. Colour / Surface
131.081.11.1 white alpine
Geberit set P-bend for floor-standing WC
Application purposes• For connecting wall-hung WCs to floor drains
Scope of delivery• Straight connector made of PE-HD, ø 90 mm• S-bend made of PVC, ø 90 mm• Pipe bracket• Sleeve made of EPDM• Tangit PVC-U special adhesive
Art. no. Colour / Surface
131.088.29.1 grey
Geberit Monolith set S-bend for wall-hung WC
Application purposes• For supporting Geberit Monolith sanitary modules in drywall
construction and autoclaved aerated concrete
Scope of delivery• Fastening material
Art. no.
131.104.00.1
Set of leg supports for Geberit Monolith sanitary module for WC
Scope of delivery• Set of 2 pieces
Art. no.
131.105.00.1
Support brackets for WC ceramic appliances with small contact surfaces, for Monolith sanitary module for wall-hung WC
Application purposes• For Geberit Monolith sanitary modules for wall-hung WC• For Geberit Monolith sanitary modules for floor-standing WCs
Characteristics• Reduces the large flush volume to 4.5 l
Scope of delivery• Set of 2 pieces
Art. no.
131.161.00.1
Cup for flush volume 4.5 / 3 litres
Geberit MonolithSanitary modules for washbasins For wall-mounted taps
132
6.2 Sanitary modules for washbasins
6.2.1 For wall-mounted taps
815
732
104
1145
13−45
8−16
0−2310
≥ 30
R½45−60
545−685
0
39
85−235
50−65R½
87
109
60
30
55
64
Application purposes• For renovations, conversions and new buildings• For concealed taps by Dornbracht, Hansa, Hansgrohe, KWC and
Villeroy & Boch• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl asymmetrical, with a width of up
to 64 cm, with double towel rail• For wall-hung washbasins, bowl symmetrical, with a width of up
to 55 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors
Characteristics• Service opening for trap, height-adjustable• Connection to drinking water supply integrated• Compensation of dimensional tolerances possible• Fastening distance for washbasin 13–31 cm, expandable
to 45 cm• Front cladding made of glass (ESG)• Integrated fastening rail for attaching washbasin and double
towel rail• Side cladding made of aluminium brushed• Drawers that can be pulled out at the sides, with mechanical
opening support• Self-supporting• Trap replaceable• Trap hidden and easily accessible• Pre-drilled for concealed tap for two-hole wall-mounted tap
Technical data
Flow pressure 1-10 bar
Maximum thermal disinfection 80 °C
Scope of delivery• Washbasin element with front and side cladding• 2 drawers (left and right) with telescopic slide• Cover profile for fastening rail• Water supply connection set with 3 reinforced braided hoses,
2 connection bends 90° Rp 1/2 and G 3/8 and 2 angle stop valves, 1/2“
• Trap with straight connector and union nut G 1 1/4• Straight connector made of ASA, ø 32 mm• Straight connector made of ASA, ø 40 mm• Set of seals• Fastening plate for mixer for two-hole wall-mounted tap• Fastening material for solid wall
Art. no. Colour / Surface
131.042.SI.1 white glass
131.042.SJ.1 black glass
131.042.SQ.1 umber glass
Geberit Monolith sanitary module for washbasin, 114 cm, two-hole wall-mounted tap, gauge 10 cm, mixer right, drawers left and right
Geberit MonolithSanitary modules for washbasinsFor wall-mounted taps
133
815
732
104
1145
13−45
8−16
0−2310
≥ 30
R½45−60
545−685
0
39
85−235
50−65R½
87
109
60
30
55
64
Application purposes• For renovations, conversions and new buildings• For concealed taps by Dornbracht, Hansa, Hansgrohe, KWC and
Villeroy & Boch• For wall inlets• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl asymmetrical, with a width of up
to 64 cm, with double towel rail• For wall-hung washbasins, bowl symmetrical, with a width of up
to 55 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors
Characteristics• Service opening for trap, height-adjustable• Connection to drinking water supply integrated• Compensation of dimensional tolerances possible• Fastening distance for washbasin 13–31 cm, expandable
to 45 cm• Front cladding made of glass (ESG)• Integrated fastening rail for attaching washbasin and double
towel rail• Side cladding made of aluminium brushed• Drawers that can be pulled out at the sides, with mechanical
opening support• Self-supporting• Trap replaceable• Trap hidden and easily accessible• Pre-drilled for concealed tap for two-hole wall-mounted tap
Technical data
Flow pressure 1-10 bar
Maximum thermal disinfection 80 °C
Scope of delivery• Washbasin element with front and side cladding• Drawer, left, with telescopic slide• Cover profile for fastening rail• Water supply connection set with 3 reinforced braided hoses,
2 connection bends 90° Rp 1/2 and G 3/8 and 2 angle stop valves, 1/2“
• Trap with straight connector and union nut G 1 1/4• Straight connector made of ASA, ø 32 mm• Straight connector made of ASA, ø 40 mm• Set of seals• Fastening plate for mixer for two-hole wall-mounted tap• Fastening material for solid wall
Art. no. Colour / Surface
131.040.SI.1 white glass
131.040.SJ.1 black glass
131.040.SQ.1 umber glass
Geberit Monolith sanitary module for washbasin, 114 cm, two-hole wall-mounted tap, gauge 10 cm, mixer right, drawer left
Geberit MonolithSanitary modules for washbasins For wall-mounted taps
134
815
732
104
1145
13−45
8−16
0−2310
≥ 30
R½45−60
545−685
0
39
85−235
50−65R½
87
109
60
30
55
64
Application purposes• For renovations, conversions and new buildings• For concealed taps by Dornbracht, Hansa, Hansgrohe, KWC and
Villeroy & Boch• For wall inlets• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl asymmetrical, with a width of up
to 64 cm, with double towel rail• For wall-hung washbasins, bowl symmetrical, with a width of up
to 55 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors
Characteristics• Service opening for trap, height-adjustable• Connection to drinking water supply integrated• Compensation of dimensional tolerances possible• Fastening distance for washbasin 13–31 cm, expandable
to 45 cm• Front cladding made of glass (ESG)• Integrated fastening rail for attaching washbasin and double
towel rail• Side cladding made of aluminium brushed• Drawers that can be pulled out at the sides, with mechanical
opening support• Self-supporting• Trap replaceable• Trap hidden and easily accessible• Pre-drilled for concealed tap for two-hole wall-mounted tap
Technical data
Flow pressure 1-10 bar
Maximum thermal disinfection 80 °C
Scope of delivery• Washbasin element with front and side cladding• Drawer, right, with telescopic slide• Cover profile for fastening rail• Water supply connection set with 3 reinforced braided hoses,
2 connection bends 90° Rp 1/2 and G 3/8 and 2 angle stop valves, 1/2“
• Trap with straight connector and union nut G 1 1/4• Straight connector made of ASA, ø 32 mm• Straight connector made of ASA, ø 40 mm• Set of seals• Fastening plate for mixer for two-hole wall-mounted tap• Fastening material for solid wall
Art. no. Colour / Surface
131.041.SI.1 white glass
131.041.SJ.1 black glass
131.041.SQ.1 umber glass
Geberit Monolith sanitary module for washbasin, 114 cm, two-hole wall-mounted tap, gauge 10 cm, mixer right, drawer right
Geberit MonolithSanitary modules for washbasinsFor wall-mounted taps
135
815
732
104
1145
13−45
8−16
10
R½45−60
545−685
0
39
85−235
50−65R½
87
109
60
30
55
64
Application purposes• For renovations, conversions and new buildings• For concealed taps by Dornbracht, Hansa, Hansgrohe, KWC and
Villeroy & Boch• For wall inlets• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl asymmetrical, with a width of up
to 64 cm, with double towel rail• For wall-hung washbasins, bowl symmetrical, with a width of up
to 55 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors
Characteristics• Service opening for trap, height-adjustable• Connection to drinking water supply integrated• Compensation of dimensional tolerances possible• Fastening distance for washbasin 13–31 cm, expandable
to 45 cm• Front cladding made of glass (ESG)• Integrated fastening rail for attaching washbasin and double
towel rail• Side cladding made of aluminium brushed• Self-supporting• Trap replaceable• Trap hidden and easily accessible• Pre-drilled for concealed tap for two-hole wall-mounted tap
Technical data
Flow pressure 1-10 bar
Maximum thermal disinfection 80 °C
Scope of delivery• Washbasin element with front and side cladding• Cover profile for fastening rail• Water supply connection set with 3 reinforced braided hoses,
2 connection bends 90° Rp 1/2 and G 3/8 and 2 angle stop valves, 1/2“
• Trap with straight connector and union nut G 1 1/4• Straight connector made of ASA, ø 32 mm• Straight connector made of ASA, ø 40 mm• Set of seals• Fastening plate for mixer for two-hole wall-mounted tap• Fastening material for solid wall
Art. no. Colour / Surface
131.043.SI.1 white glass
131.043.SJ.1 black glass
131.043.SQ.1 umber glass
Geberit Monolith sanitary module for washbasin, 114 cm, two-hole wall-mounted tap, gauge 10 cm, mixer right, without drawer
Geberit MonolithSanitary modules for washbasins For wall-mounted taps
136
815
732
104
1145
13−45
8−16
0−238
≥ 30
R½45−60
545−685
0
39
85−235
50−65R½
87
109
60
30
55
64
Application purposes• For renovations, conversions and new buildings• For concealed taps by Vola• For wall inlets• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl asymmetrical, with a width of up
to 64 cm, with double towel rail• For wall-hung washbasins, bowl symmetrical, with a width of up
to 55 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors
Characteristics• Service opening for trap, height-adjustable• Connection to drinking water supply integrated• Compensation of dimensional tolerances possible• Fastening distance for washbasin 13–31 cm, expandable
to 45 cm• Front cladding made of glass (ESG)• Integrated fastening rail for attaching washbasin and double
towel rail• Side cladding made of aluminium brushed• Drawers that can be pulled out at the sides, with mechanical
opening support• Self-supporting• Trap replaceable• Trap hidden and easily accessible• Pre-drilled for concealed tap for two-hole wall-mounted tap
Technical data
Flow pressure 1-10 bar
Maximum thermal disinfection 80 °C
Scope of delivery• Washbasin element with front and side cladding• 2 drawers (left and right) with telescopic slide• Cover profile for fastening rail• Water supply connection set with 3 reinforced braided hoses,
2 connection bends 90° Rp 1/2 and G 3/8 and 2 angle stop valves, 1/2“
• Trap with straight connector and union nut G 1 1/4• Straight connector made of ASA, ø 32 mm• Straight connector made of ASA, ø 40 mm• Set of seals• Fastening plate for mixer for two-hole wall-mounted tap• Fastening material for solid wall
Art. no. Colour / Surface
131.046.SI.1 white glass
131.046.SJ.1 black glass
131.046.SQ.1 umber glass
Geberit Monolith sanitary module for washbasin, 114 cm, two-hole wall-mounted tap, gauge 8 cm, mixer left, drawers left and right
Geberit MonolithSanitary modules for washbasinsFor wall-mounted taps
137
815
732
104
1145
13−45
8−16
0−238
≥ 30
R½45−60
545−685
0
39
85−235
50−65R½
87
109
60
30
55
64
Application purposes• For renovations, conversions and new buildings• For concealed taps by Vola• For wall inlets• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl asymmetrical, with a width of up
to 64 cm, with double towel rail• For wall-hung washbasins, bowl symmetrical, with a width of up
to 55 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors
Characteristics• Service opening for trap, height-adjustable• Connection to drinking water supply integrated• Compensation of dimensional tolerances possible• Fastening distance for washbasin 13–31 cm, expandable
to 45 cm• Front cladding made of glass (ESG)• Integrated fastening rail for attaching washbasin and double
towel rail• Side cladding made of aluminium brushed• Drawers that can be pulled out at the sides, with mechanical
opening support• Self-supporting• Trap replaceable• Trap hidden and easily accessible• Pre-drilled for concealed tap for two-hole wall-mounted tap
Technical data
Flow pressure 1-10 bar
Maximum thermal disinfection 80 °C
Scope of delivery• Washbasin element with front and side cladding• Drawer, left, with telescopic slide• Cover profile for fastening rail• Water supply connection set with 3 reinforced braided hoses,
2 connection bends 90° Rp 1/2 and G 3/8 and 2 angle stop valves, 1/2“
• Trap with straight connector and union nut G 1 1/4• Straight connector made of ASA, ø 32 mm• Straight connector made of ASA, ø 40 mm• Set of seals• Fastening plate for mixer for two-hole wall-mounted tap• Fastening material for solid wall
Art. no. Colour / Surface
131.044.SI.1 white glass
131.044.SJ.1 black glass
131.044.SQ.1 umber glass
Geberit Monolith sanitary module for washbasin, 114 cm, two-hole wall-mounted tap, gauge 8 cm, mixer left, drawer left
Geberit MonolithSanitary modules for washbasins For wall-mounted taps
138
815
732
104
1145
13−45
8−16
0−23
≥ 30
8
R½45−60
545−685
0
39
85−235
50−65R½
87
109
60
30
55
64
Application purposes• For renovations, conversions and new buildings• For concealed taps by Vola• For wall inlets• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl asymmetrical, with a width of up
to 64 cm, with double towel rail• For wall-hung washbasins, bowl symmetrical, with a width of up
to 55 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors
Characteristics• Service opening for trap, height-adjustable• Connection to drinking water supply integrated• Compensation of dimensional tolerances possible• Fastening distance for washbasin 13–31 cm, expandable
to 45 cm• Front cladding made of glass (ESG)• Integrated fastening rail for attaching washbasin and double
towel rail• Side cladding made of aluminium brushed• Drawers that can be pulled out at the sides, with mechanical
opening support• Self-supporting• Trap replaceable• Trap hidden and easily accessible• Pre-drilled for concealed tap for two-hole wall-mounted tap
Technical data
Flow pressure 1-10 bar
Maximum thermal disinfection 80 °C
Scope of delivery• Washbasin element with front and side cladding• Drawer, right, with telescopic slide• Cover profile for fastening rail• Water supply connection set with 3 reinforced braided hoses,
2 connection bends 90° Rp 1/2 and G 3/8 and 2 angle stop valves, 1/2“
• Trap with straight connector and union nut G 1 1/4• Straight connector made of ASA, ø 32 mm• Straight connector made of ASA, ø 40 mm• Set of seals• Fastening plate for mixer for two-hole wall-mounted tap• Fastening material for solid wall
Art. no. Colour / Surface
131.045.SI.1 white glass
131.045.SJ.1 black glass
131.045.SQ.1 umber glass
Geberit Monolith sanitary module for washbasin, 114 cm, two-hole wall-mounted tap, gauge 8 cm, mixer left, drawer right
Geberit MonolithSanitary modules for washbasinsFor wall-mounted taps
139
815
732
104
1145
13−45
8−16
8
R½45−60
545−685
0
39
85−235
50−65R½
87
109
60
30
55
64
Application purposes• For renovations, conversions and new buildings• For concealed taps by Vola• For wall inlets• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl asymmetrical, with a width of up
to 64 cm, with double towel rail• For wall-hung washbasins, bowl symmetrical, with a width of up
to 55 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors
Characteristics• Service opening for trap, height-adjustable• Connection to drinking water supply integrated• Compensation of dimensional tolerances possible• Fastening distance for washbasin 13–31 cm, expandable
to 45 cm• Front cladding made of glass (ESG)• Integrated fastening rail for attaching washbasin and double
towel rail• Side cladding made of aluminium brushed• Self-supporting• Trap replaceable• Trap hidden and easily accessible• Pre-drilled for concealed tap for two-hole wall-mounted tap
Technical data
Flow pressure 1-10 bar
Maximum thermal disinfection 80 °C
Scope of delivery• Washbasin element with front and side cladding• Cover profile for fastening rail• Water supply connection set with 3 reinforced braided hoses,
2 connection bends 90° Rp 1/2 and G 3/8 and 2 angle stop valves, 1/2“
• Trap with straight connector and union nut G 1 1/4• Straight connector made of ASA, ø 32 mm• Straight connector made of ASA, ø 40 mm• Set of seals• Fastening plate for mixer for two-hole wall-mounted tap• Fastening material for solid wall
Art. no. Colour / Surface
131.047.SI.1 white glass
131.047.SJ.1 black glass
131.047.SQ.1 umber glass
Geberit Monolith sanitary module for washbasin, 114 cm, two-hole wall-mounted tap, gauge 8 cm, mixer left, without drawer
Geberit MonolithSanitary modules for washbasins For deck-mounted taps
140
6.2.2 For deck-mounted taps
815
732
1145
13−45
8−16
0−23
≥ 30
R½45−53
545−615
39
85−235
50−65R½
0
87
109
60
30
55
64
Application purposes• For renovations, conversions and new buildings• For deck-mounted taps• For wall inlets• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl asymmetrical, with a width of up
to 64 cm, with double towel rail• For wall-hung washbasins, bowl symmetrical, with a width of up
to 55 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors
Characteristics• Service opening for trap, height-adjustable• Connection to drinking water supply integrated• Compensation of dimensional tolerances possible• Fastening distance for washbasin 13–31 cm, expandable
to 45 cm• Front cladding made of glass (ESG)• Integrated fastening rail for attaching washbasin and double
towel rail• Side cladding made of aluminium brushed• Drawers that can be pulled out at the sides, with mechanical
opening support• Self-supporting• Trap replaceable• Trap hidden and easily accessible
Technical data
Flow pressure 1-10 bar
Maximum thermal disinfection 80 °C
Scope of delivery• Washbasin element with front and side cladding• 2 drawers (left and right) with telescopic slide• Cover profile for fastening rail• 2 angle stop valves, 1/2“• Trap with straight connector and union nut G 1 1/4• Straight connector made of ASA, ø 32 mm• Straight connector made of ASA, ø 40 mm• Set of seals• Valve extension• Fastening material for solid wall
Art. no. Colour / Surface
131.050.SI.1 white glass
131.050.SJ.1 black glass
131.050.SQ.1 umber glass
Geberit Monolith sanitary module for washbasin, 114 cm, for deck-mounted tap, drawers left and right
Geberit MonolithSanitary modules for washbasinsFor deck-mounted taps
141
815
732
1145
13−45
8−16
0−23
≥ 30
R½45−53
545−615
39
85−235
50−65R½
0
87
109
60
30
55
64
Application purposes• For renovations, conversions and new buildings• For deck-mounted taps• For wall inlets• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl asymmetrical, with a width of up
to 64 cm, with double towel rail• For wall-hung washbasins, bowl symmetrical, with a width of up
to 55 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors
Characteristics• Service opening for trap, height-adjustable• Connection to drinking water supply integrated• Compensation of dimensional tolerances possible• Fastening distance for washbasin 13–31 cm, expandable
to 45 cm• Front cladding made of glass (ESG)• Integrated fastening rail for attaching washbasin and double
towel rail• Side cladding made of aluminium brushed• Drawers that can be pulled out at the sides, with mechanical
opening support• Self-supporting• Trap replaceable• Trap hidden and easily accessible
Technical data
Flow pressure 1-10 bar
Maximum thermal disinfection 80 °C
Scope of delivery• Washbasin element with front and side cladding• Drawer, left, with telescopic slide• Cover profile for fastening rail• 2 angle stop valves, 1/2“• Trap with straight connector and union nut G 1 1/4• Straight connector made of ASA, ø 32 mm• Straight connector made of ASA, ø 40 mm• Set of seals• Valve extension• Fastening material for solid wall
Art. no. Colour / Surface
131.048.SI.1 white glass
131.048.SJ.1 black glass
131.048.SQ.1 umber glass
Geberit Monolith sanitary module for washbasin, 114 cm, for deck-mounted tap, drawer left
Geberit MonolithSanitary modules for washbasins For deck-mounted taps
142
815
732
1145
13−45
8−16
0−23
≥ 30
R½45−53
545−615
39
85−235
50−65R½
0
87
109
60
30
55
64
Application purposes• For renovations, conversions and new buildings• For deck-mounted taps• For wall inlets• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl asymmetrical, with a width of up
to 64 cm, with double towel rail• For wall-hung washbasins, bowl symmetrical, with a width of up
to 55 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors
Characteristics• Service opening for trap, height-adjustable• Connection to drinking water supply integrated• Compensation of dimensional tolerances possible• Fastening distance for washbasin 13–31 cm, expandable
to 45 cm• Front cladding made of glass (ESG)• Integrated fastening rail for attaching washbasin and double
towel rail• Side cladding made of aluminium brushed• Drawers that can be pulled out at the sides, with mechanical
opening support• Self-supporting• Trap replaceable• Trap hidden and easily accessible
Technical data
Flow pressure 1-10 bar
Maximum thermal disinfection 80 °C
Scope of delivery• Washbasin element with front and side cladding• Drawer, right, with telescopic slide• Cover profile for fastening rail• 2 angle stop valves, 1/2“• Trap with straight connector and union nut G 1 1/4• Straight connector made of ASA, ø 32 mm• Straight connector made of ASA, ø 40 mm• Set of seals• Valve extension• Fastening material for solid wall
Art. no. Colour / Surface
131.049.SI.1 white glass
131.049.SJ.1 black glass
131.049.SQ.1 umber glass
Geberit Monolith sanitary module for washbasin, 114 cm, for deck-mounted tap, drawer right
Geberit MonolithSanitary modules for washbasinsFor deck-mounted taps
143
815
732
1145
13−45
8−16
R½
45−53545−615
39
85−235
50−65R½
0
87
109
60
30
55
64
Application purposes• For renovations, conversions and new buildings• For deck-mounted taps• For wall inlets• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl asymmetrical, with a width of up
to 64 cm, with double towel rail• For wall-hung washbasins, bowl symmetrical, with a width of up
to 55 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors
Characteristics• Service opening for trap, height-adjustable• Connection to drinking water supply integrated• Compensation of dimensional tolerances possible• Fastening distance for washbasin 13–31 cm, expandable
to 45 cm• Front cladding made of glass (ESG)• Integrated fastening rail for attaching washbasin and double
towel rail• Side cladding made of aluminium brushed• Self-supporting• Trap replaceable• Trap hidden and easily accessible
Technical data
Flow pressure 1-10 bar
Maximum thermal disinfection 80 °C
Scope of delivery• Washbasin element with front and side cladding• Cover profile for fastening rail• 2 angle stop valves, 1/2“• Trap with straight connector and union nut G 1 1/4• Straight connector made of ASA, ø 32 mm• Straight connector made of ASA, ø 40 mm• Set of seals• Valve extension• Fastening material for solid wall
Art. no. Colour / Surface
131.051.SI.1 white glass
131.051.SJ.1 black glass
131.051.SQ.1 umber glass
Geberit Monolith sanitary module for washbasin, 114 cm, for deck-mounted tap, without drawer
Geberit MonolithSanitary modules for washbasins Accessories
144
6.2.3 Accessories
Characteristics• Towel rail, Emco Loft series• Chrome-plated
Scope of delivery• Fastening material
Art. no. Colour / Surface L [cm]
131.109.21.1 bright chrome-plated 34
131.110.21.1 bright chrome-plated 44
Double towel rail for Geberit Monolith sanitary module for washbasin
L
B
Application purposes• For Geberit Monolith sanitary modules for washbasin with
drawer• For top, short drawer compartment• For long drawer compartments, bottom
Characteristics• Fastening in drawer with magnetic tape
Art. no. Colour / Surface B [cm]
L [cm]
131.129.94.1 iron grey RAL 7011 3.2 22
131.137.94.1 iron grey RAL 7011 3.2 15.9
Rail for Geberit Monolith sanitary module for washbasin
81112
159
Application purposes• For Geberit Monolith sanitary modules for washbasin with
drawer
Characteristics• Fastening in drawer with magnetic tape
Art. no.
131.119.00.1
Soap dispenser for Geberit Monolith sanitary module for washbasin with drawers
Application purposes• For Geberit Monolith sanitary modules for washbasin
Scope of delivery• Set of 2 pieces
Art. no.
131.099.00.1
Fastening set for Geberit Monolith sanitary module for washbasin, for installation with existing hanger bolts
Geberit MonolithSanitary modules for bidetsFor wall-hung and floor-standing bidets
145
6.3 Sanitary modules for bidets
6.3.1 For wall-hung and floor-standing bidets
0
485
10118
106
0
Application purposes• For renovations, conversions and new buildings• For floor-standing and wall-hung bidets• For deck-mounted taps• For wall inlets• For water supply connections at the bottom• For replacing wall-hung and floor-standing bidets• For mounting on finished floors
Characteristics• Compensation of dimensional tolerances possible• Fastening distance for wall-hung bidet 18 cm• Front cladding made of glass (ESG)• Wall inlet height 8–21 cm from finished floor• Fastening height wall-hung bidet 35 ± 1 cm• Side cladding made of aluminium brushed• Self-supporting• Water supply connection on the bottom
Technical data
Maximum operating pressure 10 bar
Maximum thermal disinfection 80 °C
Scope of delivery• Element for bidet with front and side cladding• Water supply connection set• Trap• Fastening material for solid wall
Art. no. Colour / Surface
131.030.SI.1 white glass
131.030.SJ.1 black glass
131.030.SQ.1 umber glass
Geberit Monolith sanitary module for bidet, 101 cm
GEBERIT_Catalog complet Sisteme Sanitare 2015 2016.pdf1.1Installation elements1.1.1Elements for WCsAccessory overview: Geberit Kombifix elements for WCs1.1.2Elements for washbasins1.1.3Elements for bidets1.1.4Elements for urinalsAccessory overview: Geberit Kombifix elements for urinals
1.1.5Elements for showers
1.2Accessories1.2.1For fastenings
2.1Installation elements2.1.1Elements for WCsAccessory overview: Geberit Duofix elements for WCs2.1.2Elements for washbasinsAccessory overview: Geberit Duofix elements for washbasins
2.1.3Elements for bidets2.1.4Elements for urinalsAccessory overview: Geberit Duofix elements for urinals
2.1.5Elements for showers, with wall drain2.1.6Elements for showers and bathtubsAccessory overview: Geberit Duofix elements for showers and bathtubs
2.1.7Elements for loads
2.2Accessories2.2.1For installation elements
3.1System walls3.1.1Support systems3.1.2Accessories for prefabrication3.1.3Panellings
3.2Installation elements3.2.1Elements for WCsAccessory overview: Geberit GIS elements for WCs
3.2.2Elements for washbasins3.2.3Elements for bidets3.2.4Elements for urinalsAccessory overview: Geberit GIS elements for urinals
3.2.5Elements for taps and devices3.2.6Elements for loads3.2.7Accessories
3.3Accessories3.3.1For system walls3.3.2For supply systems3.3.3For drainage systems
4.1Sigma concealed cisterns4.2Omega concealed cisterns4.3Delta concealed cisterns4.4Flush pipes4.5Accessories
5.1Actuator plates5.1.1For Sigma concealed cisternsAssortment overview: Geberit actuator plates of the Sigma series for concealed cisternsOverview: Range of colours
5.1.2For Omega concealed cisternsAssortment overview: Geberit actuator plates of the Omega series for concealed cisterns
5.1.3For Delta concealed cisternsAssortment overview: Geberit actuator plates of the Delta series for concealed cisterns
5.1.4Accessories
5.2WC flush controls with electronic flush actuationAssortment overview: Geberit WC flush controls with electronic flush actuation, touchlessAssortment overview: Geberit WC flush controls with electronic flush actuation, manual
5.2.1For mains operation, for Geberit Sigma concealed cisterns 12 cm5.2.2For mains operation, for Geberit Sigma concealed cisterns 8 cm5.2.3For battery operation, for Geberit Sigma concealed cisterns 12 cm
5.3WC flush controls with pneumatic flush actuationSystem overview: pneumatie flush actuators5.3.1For dual flush5.3.2For single flush
5.4Accessories for flush controls5.4.1Accessories
6.1Sanitary modules for WCsSystem overview Geberit Monolith for wall-hung washbasin6.1.1For wall-hung WCs6.1.2For floor-standing WCs6.1.3For Geberit AquaClean6.1.4Accessories
6.2Sanitary modules for washbasins6.2.1For wall-mounted taps6.2.2For deck-mounted taps6.2.3Accessories
6.3Sanitary modules for bidets6.3.1For wall-hung and floor-standing bidets
7.1Exposed cisterns for WCs7.1.1Close-coupled7.1.2High-level7.1.3Low and half-high level
7.2Flush pipes7.2.1For exposed cisterns
7.3Accessories7.3.1Connections7.3.2Angle valves7.3.3Sleeves
8.1With pneumatic flush actuation9.1Fill valves9.1.1Fill valves for concealed cisterns9.1.2Fill valves for ceramic cisterns9.1.3Fill valves for flushing cisterns Universal
9.2Flush valves9.2.1Dual flush
9.3Mechanisms9.3.1Dual flush
10.1Urinal flush controlsAssortment overview: Geberit urinal flush controlsSystem overview urinal flush controls10.1.1With electronic flush actuation, mains operation10.1.2With electronic flush actuation, battery operation10.1.3With pneumatic flush actuation
10.2Urinal divisions10.2.1Urinal divisions, square10.2.2Urinal divisions, oval
10.3Accessories10.3.1Installation sets and replacement sets10.3.2Flush pipes, flush bends and adapters
11.1Deck-mounted tapsAssortment overview: Geberit deck-mounted taps for washbasins, touchless11.1.1With electronic flush actuation, mains operation11.1.2With electronic flush actuation, battery operation11.1.3With electronic flush actuation, generator operation11.1.4Self-closing taps
11.2Wall-mounted taps11.2.1With electronic flush actuation, mains operation
11.3AccessoriesAccessory overview: Geberit wall-mounted taps for washbasins, touchless11.3.1Power supply units and battery chargers11.3.2Tap aerators11.3.3Installation, conversion and mounting sets
System Overview: Shower drains12.1Floor drainage for showers12.1.1Wall drains12.1.2Accessories for wall drains12.1.3Shower channels12.1.4Drains for floor-even showers12.1.5Accessories for drains for floor-even showers
13.1Drain assemblies for bathtubs, d52Assortment overview: Geberit bathtub drains13.1.1With turn handle actuation13.1.2Ready-to-fit sets for turn handle actuation13.1.3With turn handle actuation and inlet13.1.4Ready-to-fit sets for turn handle actuation and inlet13.1.5With pushbutton actuation13.1.6Ready-to-fit sets for pushbutton actuation PushControl13.1.7With waste plugs
13.2Drain assemblies for bathtubs, d9013.2.1With turn handle actuation13.2.2Ready-to-fit-sets for turn handle actuation13.2.3With turn handle actuation and inlet13.2.4Ready-to-fit-sets for turn handle actuation and inlet
13.3Accessories for drain assemblies, for bathtubs13.3.1Connection sets13.3.2Pipe interruptors for concealed installation13.3.3T-pieces13.3.4Elbow tap connectors
13.4Drain assemblies for shower trays, d52Assortment overview: Geberit shower drains13.4.1Without drain covers13.4.2Drain covers
13.5Drain assemblies for shower trays, d6213.5.1Without drain covers13.5.2Drain covers
13.6Drain assemblies for shower trays, d9013.6.1Without drain covers13.6.2Drain covers
13.7Drain assemblies for washbasins and bidets13.7.1P-traps13.7.2Tubular traps, space-saving models13.7.3Dip tube traps forwashbasins13.7.4Concealed traps13.7.5Connection bends13.7.6Covers13.7.7Seals13.7.8Extensions
13.8Drain assemblies for urinals13.8.1Urinal traps13.8.2Suction traps13.8.3Concealed traps13.8.4P-traps13.8.5Flush pipe and flush bend extensions13.8.6Straight connectors13.8.7Connection bends
13.9Drain assemblies for washbasins and sinks13.9.1Traps13.9.2Connection bends13.9.3Straight connectors13.9.4Connection sets13.9.5Flush bend extensions13.9.6Waste couplings made of PVC13.9.7Sleeves and cover caps13.9.8Adapters and connectingpieces
13.10Drain assemblies for kitchen sinks13.10.1P-traps13.10.2Waste couplings for kitchen sink13.10.3Straight connectors13.10.4Accessories
13.11Drain assemblies for devices13.11.1P-traps13.11.2Concealed traps13.11.3Surface-mounted traps13.11.4Connections13.11.5Accessories
13.12Drain assemblies for sinks13.12.1Traps13.12.2Straight connectors13.12.3Drain valves13.12.4Accessories
14.1System overview Geberit AquaClean14.2WC enhancement solutions14.3WC complete solutions14.3.1Wall-hung WCs for concealed cisterns14.3.2Floor-standing WCs for concealed cisterns14.3.3Wall-hung WCs with exposed cisterns14.3.4Floor-standing WCs with exposed cisterns
14.4AccessoriesAccessory overview: Water supply and electrical connection for Geberit concealed cisterns14.4.1For WC enhancement solutions14.4.2For WC complete solutions14.4.3For WC enhancement solutions and WC complete solutions14.4.4Consumables
15.1System overview Geberit Monolith15.2Design and environmental awards
15.2.1WELL label and EPD
15.3Abbreviations15.4International sales and delivery conditions15.5Index