Gdt Glossary

Home

About ETI

Demos

Blog

Newsletter

Support

Contact Us

Why Choose ETI?

Software

Products

Engineering Services

Web-Based Training

On-Site Training

Public Workshops

Live Web Training

GD&T Resources

What is GD&T?

Search

GD&T Glossary

GD&T (per ASME Y14.5M-1994) is an international language that is used on engineering drawings to accurately describe the size, form, orientation, and location of part features. It is also a design-dimensioning philosophy that encourages designers to define a part based on how it functions in the final product or assembly.

GD&T is an exact language that enables design engineers to "say what they mean" on a drawing, thus improving product designs and lowering cost. Process engineers and manufacturing use the language to interpret the design intent and to determine the best manufacturing approach. Quality control and inspection use the GD&T language to determine proper set-up and part verification.

By providing company-wide uniformity in the drawing specifications and interpretation, GD&T reduces controversy, guesswork, and assumptions throughout the design, manufacturing and inspection process.

Understanding how to apply and interpret GD&T correctly will help you:

� Create clear, concise drawings

� Improve product design

� Create drawings that reduce controversy, guesswork, and assumptions throughout the

manufacturing process

� Effectively communicate or interpret design requirements for suppliers and manufacturing

However, because GD&T is such a precise language, it involves a great many symbols and terms. Here is a list of some of the topics involved in geometric dimensioning and tolerancing

fundamentals and a short definition of each.

Actual Local Size - The value of any individual distance at any cross section of a feature of size.

Actual Mating Envelope of an External Feature of Size - A similar perfect feature counterpart of the smallest size that can be circumscribed about the feature so that it just contacts the

surfaces at the highest points.

Actual Mating Envelope of an Internal Feature of Size - A similar perfect feature counterpart of the largest size that can be inscribed within the feature so that it just contacts the surfaces at

their highest points.

Angularity Control - A geometric tolerance that limits the amount a surface, axis, or centerplane

is permitted to vary from its specified angle.

ASME Y14.5M-1994 - The national standard for dimensioning and tolerancing in the United States. ASME stands for American Society of Mechanical Engineers. The Y14.5 is the standard number. "M" is to indicate the standard is metric, and 1994 is the date the standard was officially

approved.

Axis Theory - The axis (or centerplane) of a feature of size must be within the tolerance zone.

All-Around Symbol - A circle placed on the bend of the leader line of a profile

control.

Angularity - The condition of a surface, centerplane or axis being exactly at a

specified angle

Basic Dimension - A numerical value used to describe the theoretically exact size,

true profile, orientation, or location of a feature or datum target.

Page 1 of 6GD&T Free Resource: Geometric Dimensioning and Tolerancing (GD&T) Glossary o...

19/03/2013http://www.etinews.com/gdt_glossary.html

Bi-Directional Control - Where the location of a hole is controlled to a different tolerance value

in two directions.

Bilateral Tolerance - A tolerance that allows the dimension to vary in both the plus and minus

directions.

Bonus Tolerance - An additional tolerance for a geometric control. Whenever a geometric tolerance is applied to a feature of size, and it contains an MMC (or LMC) modifier in the

tolerance portion of the feature control frame, a bonus tolerance is permissible.

Boundary - The word "BOUNDARY" is placed beneath the feature control frames to invoke a

boundary control.

Cartoon Gage - A sketch of a functional gage. A cartoon gage defines the same part limits that a functional gage would, but it does not represent the actual gage construction of a functional

gage.

Circularity Control - A geometric tolerance that limits the amount of circularity on a part surface.

Circular Runout - A composite control that affects the form, orientation, and location of circular

elements of a part feature relative to a datum axis.

Circular Runout Control - A geometric tolerance that limits the amount of circular runout of a

part surface.

Coaxial Datum Features - When coaxial diameters are used to establish a datum axis.

Coaxial Diameters - Two (or more) diameters that are shown on the drawing as being on the

same centerline (axis).

Learn more about our GD&T training software

Composite Control - Controls the form, location, and orientation of a part feature simultaneously

(in a single gage reading).

Concentricity Control - A geometric tolerance that limits the concentricity error of a part feature.

Coordinate Tolerancing - A dimensioning system where a part feature is located (or defined) by

means of rectangular dimensions with given tolerances.

Coplanar Datum Features - Two or more datum features that are on the same plane.

Coplanar Surfaces - Two or more surfaces that are on the same plane.

Cylindrical Feature of Size - Contains one feature: the cylindrical surface.

Cylindricity Control - A geometric tolerance that limits the amount of cylindricity error permitted

on a part surface.

Between Symbol - A double ended arrow that indicates the tolerance zone

extends to include multiple surfaces.

Circularity - A condition where all points of a surface of revolution, at any section

perpendicular to a common axis, are equidistant from that axis.

Concentricity - The condition where the median points of all diametrically opposed elements of a cylinder (or a surface of revolution) are congruent with the axis of a

datum feature.

Controlled Radius - A radius with no flats or reversals allowed. The symbol for a

controlled radius is "CR."

Cylindricity - A condition of a surface of revolution in which all points of the surface

are equidistant from a common axis.



Datum - A theoretically exact plane, point or axis from which a dimensional measurement is

made.

Datum Feature Simulator - The inspection equipment (or gage surfaces) used to establish a

datum.

Datum Reference Frame - A set of three mutually perpendicular datum planes.

Datum Shift - The allowable movement, or looseness, between the part datum feature and the

gage.

Datum System - A set of symbols and rules that communicate to the drawing user how

dimensional measurements are to be made.

Dimension - A numerical value expressed in appropriate units of measure and used to define

the size, location, orientation, form, or other geometric characteristics of a part.

Engineering Drawing - A document that communicates a precise description of a part. This

description consists of pictures, words, numbers, and symbols.

Equal Bilateral Tolerance - A tolerance where the allowable variation from the nominal value is

the same in both directions.

Feature - A general term applied to a physical portion of a part, such as a surface, hole, or slot.

Feature of Size - One cylindrical or spherical surface, or a set of two opposed elements or

opposed parallel surfaces, associated with a size dimension.

Feature of Size Dimension - A dimension that is associated with a feature of size.

Fixed Fastener Assembly - Where the fastener is held in place (restrained) into one of the

components of the assembly.

Fixed Fastener Formula - H = F + 2T or T =

Where:

T = position tolerance diameter

H = MMC of the clearance hole

F = MMC of the fastener

Flatness Control - A geometric tolerance that limits the amount of flatness error a surface is

allowed.

Floating Fastener Assembly - Where two (or more) components are held together with

fasteners (such as bolts and nuts), and both components have clearance holes for the fasteners.

Floating Fastener Formula - T = H - F

Where:

T = position tolerance diameter (for each part)

H = MMC of the clearance hole

F= MMC of the fastener

Functional Dimensioning - A dimensioning philosophy that defines a part based on how it

functions in the final product.

Functional Gage - A gage that verifies functional requirements of part features as defined by the

geometric tolerances.

Fundamental Dimensioning Rules - A set of general rules defined by ASME for dimensioning

and interpreting drawings.

Geometric Characteristic Symbols (14) - The symbols are divided into five categories: form,

profile, orientation, location, and runout.

Geometric Dimensioning and Tolerancing (GD&T) - A set of fourteen symbols used in the language of GD&T. It consists of well-defined of symbols, rules, definitions and conventions, used on engineering drawings to accurately describe a part. GD&T is a precise mathematical

Datum Feature - A part feature that contacts a datum.

Datum Target - A symbol that describes the shape, size, and location of

gage elements that are used to establish datum planes or axes.

Click on any link below to learn more about our products

SoftwareVideo Training

Web-Based Training

Digital Instructor Kits

ReferenceBooks & Materials

Textbooks WorkbooksReferenceCharts

MiscellaneousProducts

Free Resources

Feature Control Frame - A rectangular box that is divided into compartments within which the geometric characteristic symbol, tolerance value, modifiers, and datum references

are placed.

Flatness - The condition of a surface having all of its elements in one plane.



language that can be used to describe the size, form, orientation, and location of part features.

GD&T is also a design philosophy on how to design and dimension parts.

Go Gage - A gage that is intended to fit into (for an internal feature of size) or fit over (for an

external feature of size) the feature of size.

Great Myth of GD&T - The misconception that geometric tolerancing raises product costs.

Implied Basic 90° Angles -A 90° basic angle applies where centerlines of features in a pattern (or surfaces shown at right angles on a drawing) are located and defined by basic dimensions,

and no angle is specified.

Implied Basic Zero Dimension - Where a centerline or centerplane of a feature of size is shown in line with a datum axis or centerplane, the distance between the centerlines or centerplanes is

an implied basic zero.

Implied Datum - An assumed plane, axis, or point from which a dimensional measurement is

made.

Inclined Datum Feature - A datum feature that is at an angle other than 90o, relative to the

other datum features.

Inner Boundary (IB) - A worst-case boundary generated by the smallest feature of size minus

the stated geometric tolerance (and any additional tolerance, if applicable).

International Standards Organization (ISO) - The organization that published an associated

series of standards on dimensioning and tolerancing.

Limit Tolerance - When a dimension has its high and low limits stated. In a limit tolerance, the

high value is placed on top, and the low value is placed on the bottom.

Median Point - The mid-point of a two-point measurement.

Modifiers (8) - Communicate additional information about the drawing or tolerancing of a part.

Multiple Single-Segment Profile Control - When two or more profile controls are tolerancing a surface relative to different datums.

Multiple Single-Segment Tolerance of Position Control - When two (or more) single segment tolerance of position callouts are used to define the location, spacing, and orientation of a pattern

of feature of size.

No-Go Gage - A gage that is not intended to fit into or over a feature of size. A No-Go gage is

made to the LMC limit of the feature of size.

Non-Feature of Size Dimension - A dimension that is not associated with a feature of size.

Outer Boundary (OB) - A worst-case boundary generated by the largest feature of size plus the

stated geometric tolerance (and any additional tolerance, if applicable).

Parallelism Control - A geometric tolerance that limits the amount a surface, axis, or

centerplane is permitted to vary from being parallel to the datum.

Perpendicularity Control - A geometric tolerance that limits the amount a surface, axis, or

centerplane is permitted to vary from being perpendicular to the datum.

Planar Datum - The true geometric counterpart of a planar datum feature.

Planar Feature of Size - A feature of size that contains two features: the two parallel plane

surfaces.

Plus-minus Tolerance - The nominal or target value of the dimension is given first, followed by a

plus-minus expression of a tolerance.

Primary Datum - The first datum plane that the part contacts in a dimensional measurement.

Least Material Condition - The condition in which a feature of size contains the

least amount of material everywhere within the stated limits of size.

Maximum Material Condition - The condition in which a feature of size contains

the maximum amount of material everywhere within the stated limits of size.

DO YOU NEED GD&T TRAINING? TEST YOUR SKILLS TODAY

Do you know how to use stacks to determine part distances or assembly conditions? Do

you understand design analysis using

geometric tolerances in stacks?

Take our Stacks Skills Survey today.

How well do you know GD&T? Do you know the symbols, requirements, tolerance

zones, and limitations?

Take the GD&T Skills Survey today.

Parallelism - The condition that results when a surface, axis or centerplane is

exactly parallel to a datum.

Perpendicularity - The condition that results when a surface, axis, or centerplane

is exactly 90° to a datum.



Profile- The outline of a part feature in a given plane.

Profile Control - A geometric tolerance that specifies a uniform boundary along the true profile

that the elements of the surface must lie within.

Regardless of Feature Size - The term that indicates a geometric tolerance applies at any

increment of size of the feature, within its size tolerance.

Rule #1 - Where only a tolerance of size is specified, the limits of size of an individual feature

prescribe the extent to which variations in its form--as well as in its size--are allowed.

Rule #2 - RFS applies, with respect to the individual tolerance, datum reference, or both, where

no modifying symbol is specified.

Secondary Datum - The second datum plane that the part contacts in a dimensional

measurement

Simulated Datum - The plane (or axis) established by the datum feature simulator.

Simultaneous Engineering - A process where design is a result of input from marketing,

engineering, manufacturing, inspection, assembly, and service.

Special-Case Feature of Size Datum - When a feature of size datum feature is referenced at

MMC, but simulated in the gage at a boundary other than MMC.

Straightness of a Line Element - The condition where each line element (or axis or

centerplane) is a straight line.

Straightness Control (Feature of Size) - A geometric tolerance that, when applied to a feature

of size, limits the amount of straightness error allowed in the axis or centerplane.

Straightness Control (Surface) - A geometric tolerance that, when directed to a surface, limits

the amount of straightness error allowed in each surface line element.

Symmetry Control - A geometric tolerance that limits the symmetry error of a part feature.

Tertiary Datum - The third datum plane that the part contacts in a dimensional measurement.

3-2-1 Rule - Defines the minimum number of points of contact required for a part datum feature

with its primary, secondary, and tertiary datum planes.

Tolerance - The total amount that features of the part are permitted to vary from the specified

dimension.

Tolerance Analysis Chart - A means of graphically displaying the limits of a part as defined by

the print specifications

Tolerance of Position Control - A geometric tolerance that defines the location tolerance of a

feature of size from its true position.

Tolerance Stack - A calculation used to find the extreme max. or min. distance on a part.

Total Runout Control - A geometric tolerance that limits the amount of total runout of a surface.

Profile of a Line Control - A geometric tolerance that limits the amount of error for

line elements relative to their true profile.

Profile of a Surface Control - A geometric tolerance that limits the amount of error

a surface can have relative to its true profile.

Projected Tolerance Zone - A tolerance zone that is projected above the part

surface.

Radius - A straight line extending from the center of an arc or circle to its surface.

Click on any link below to learn more about our products

SoftwareVideo

TrainingWeb-Based Training

Digital Instructor Kits

ReferenceBooks & Materials

Textbooks WorkbooksReferenceCharts

MiscellaneousProducts

Free Resources

Straightness (Axis or Centerplane) - The condition where an axis is a straight

line (or, in the case of a centerplane, each line element is a straight line).

Symmetry - The condition where the median points of all opposed elements of two or more feature surfaces are congruent with the axis or centerplane of a datum

feature.

Total Runout - A composite control affecting the form, orientation, and location of

all surface elements of a diameter (or surface) relative to a datum axis.



True Geometric Counterpart - The theoretical perfect boundary or best fit tangent plane of a

specified datum feature.

True Position - The theoretically exact location of a feature of size as defined by basic

dimensions.

True Profile - The exact profile of a part feature as described by basic dimensions.

Unequal Bilateral Tolerance - A tolerance where the allowable variation is from the target value,

and the variation is not the same in both directions.

Unilateral Tolerance - A tolerance where the allowable variation from the target value is all in

one direction and zero in the other direction.

Variable Gage - A gage capable of providing a numerical reading of a part parameter.

Virtual Condition (VC) - A worst-case boundary generated by the collective effects of a feature

of size specified at MMC or at LMC and the geometric tolerance for that material condition.

Virtual Condition Boundary Theory - A theoretical boundary limits the location of the surfaces

of a feature of size.

Worst-case Boundary (WCB) - A general term to refer to the extreme boundary of a feature of size that is the worst-case for assembly. Depending upon the part dimensioning, a worst-case

boundary can be a virtual condition, inner boundary, or outer boundary.

Zero Tolerance at MMC - A method of tolerancing part features that includes the tolerance geometric value with the feature of size tolerance and states a zero at MMC in the feature control

frame.

Truly the Ultimate Pocket Guide on GD&T, this informative guide is the perfect on-the-job pocket reference for your GD&T needs. It's an economical reference tool you can’t afford to be without and a must for anyone who uses engineering drawings. It’s a must for anyone who uses engineering drawings. Order one for each member of your team!

The Ultimate Pocket Guide on Geometric Dimensioning and Tolerancing is a handy reference tool in one convenient pocket-sized package. Carry it with you on the job and have a resource to all your GD&T questions at your fingertips. More info

ETI will bring the training to you. Take a look at our onsite workshops

Home | News | Solutions | Alex Krulikowski | History | Testimonials | ETImail | Why Choose ETI?Products | Blog | Downloads | On-Site Training | Public Workshops | Live Web Training | Engineering Services | Discussion Board

Tech Papers | Online Training | Tip of the Month | GD&T Certification | What is GD&T? | GD&T GlossaryHTML Catalog | Catalog | ISO GD&T Glossary | GD&T Savings Calculator | Links | Maps | Media Page | Contact ETI

Reprint Policy

Copyright © 1997 - 2012 Effective Training Inc. All rights reserved.

This file last modified 01/07/09



Documents

Gdt Glossary