GD2AR2” Gravity LED Adjustable

ELECTRICAL DATA

LED Light Engine Nominal Delivered Lumens* System Wattage**

L1L2L3

850lm @ 3000K / 82CRI1200lm @ 3000K / 82CRI1500lm @ 3000K / 82CRI

10 Watts15 Watts20 Watts

* Delivered Lumens will vary depending on CCT, CRI, optic and reflector finish.** System Wattage includes driver and LED Module consumption.

Housing Part Number: (Example: GD2ARNCL1279DIMSP)Housing Installation Type Wattage CCT / CRI Dimming Voltage Optic Options

GD2AR NCNIC1

NAIC1

RC

(New Cons Non-IC)(New Cons IC-Rated)(New Cons Air-Tight IC)(Remodel Non-IC)

L1L2L3

(10W)(15W)(20W)

27279303093535940409

(2700K / 82CRI)(2700K / 92CRI)(3000K / 82CRI)(3000K / 92CRI)(3500K / 82CRI)(3500K / 92CRI)(4000K / 82CRI)(4000K / 92CRI)

DIM2

D101ED10V11,3

ED10V011,3

LUT1,3

LUT21,2,3

(Phase Dimming)(0-10V Dimming 1%)(eldoLED 0-10V 1%)(eldoLED 0-10V 0.1%)(Lutron® LDE1 EcoSystem 1%)(Lutron® LTEA2W 2-Wire 1%)

blank27

(120V)(277V)

NS4

SPNFFLWFVF

(7° NSP)(16° SP)(24° NFL)(36° FL)(48° WFL)(60° VFL)

EM71,3,5 (7W Emergency BackupIOTA part #ILB-CP07-A)

Reflector Part Number: (Example: IRRT200W-SF)

Reflector Reflector Finish Trim

IRRT200IRRL2006

(5/8” Regress Trim)(5/8” Regress Trimless)

WB7

HZWHT7

(White)(Black)(Haze)(Wheat)

-SFblank6

(Self Flanged)(Trimless)

Trimmed Reflectors

Trimless Reflectors

Trimless Mud Flanged:Perforated collar for seamless and trimless mounting. Must be ordered separately and can only be used in conjunction with trimless trims.

3-5/16”2-1/2”

2-5/8”

5/8”1/32” Trim Thickness

IRRT200

Optional Accessory

GD2R-MR6 Round Trimless Mud Ring

Filter Media

PFL2-45PFL4-45

Hex LouverSoft Focus Film

White Black

Available Trim Finishes

Haze Wheat

Notes: 1. Not available with L32. Available in 120V only3. Remote driver box required for eldoLED, Lutron and EM back

up. Compatible with IC and AIC rated housings only.4. 7° Narrow spot not available in L3, 4000K or 82CRI5. Emergency backup available with IC and AIC housings only6. Trimless options are for use with mud ring accessory only7. Consult factory for lead times

FEATURES ■ Dedicated High performance 7° Narrow Spot ■ Field changeable 16° to 60° Optics ■ Integral field changeable accessory holder ■ Toolless adjustability with 360° of rotation & 45° of tilt ■ In-field adjustable module height accommodates 1/2” to 1-1/4” ceiling thickness

LED LIGHT ENGINE ■ 10W, 15W & 20W ■ 7° Optic: 3 SDCM, 92CRI in 2700K, 3000K & 3500K ■ 16° to 60° Optics: 2 SDCM, 82/92CRI in 2700K, 3000K, 3500K & 4000K ■ Rated life of >50,000 hours L70 based on LED testing per LM-80-08 and projected values using IESNA TM21-11

OPTICS ■ Dedicated 7° Narrow Spot ■ Field changeable 16° Spot, 24° Narrow Flood, 36° Flood, 48° Wide Flood and 60° Very Wide Flood ■ Accepts (2) field changeable filter media

ELECTRICAL SYSTEM ■ 120V/277V input; Power factor >.9, 50/60Hz ■ This product complies with IEEE C62.41 for surge endurance up to 2.5KV. Additional surge protection recommended. Damage from power surge is not covered by warranty.

HOUSING ■ Heavy duty black powder coated 18 gauge steel frame

■ Accommodates 1/2” to 1-1/4” Ceilings ■ Integral driver compartment with below ceiling access

EMERGENCY BACKUP ■ Remote test switch included. External Battery operates LED load @ 7-25 nominal delivered Lumens. Servicing requires above ceiling access. ■ Available with IC and AIC housings only.

INSTALLATION ■ IC and Non-IC Rated housing types, must specify. (Remodel housings are Non-IC only) Non-IC rated housings must be kept at a minimum of 3” away from insulation

■ Remodel housings requres 5-1/2” of plenum space for installtion and serviceing. ■ Adjustable (10-3/4” to 25”) joist/grid ceiling bar hangers included (Hanger bars does not allow for height adjustments)

REFLECTOR ■ Specification grade 1.0mm spun aluminum reflector

■ Shallow cone option for maximum flexibility and 45° of adjustability

■ Reflector available in black, white, haze and wheat finishes (Consult factory for other finishes)

■ Architectural, discrete polished self flange (Note: Not available with trimless trims)

DIMMING ■ Phase dimming, Forward 1% & Reversed 5% (120V only)

■ 0-10V 1% Dimming 1% ■ EldoLED SOLOdrive 0-10V 0.1% ■ EldoLED ECOdrive 0-10V 1% ■ Lutron® LDE1 Hi-Lume 1% EcoSystem LED driver with Soft-on, Fade-to-Black dimming technology

■ Lutron® LTEA2W Hi-lume 1% 2-Wire LED driver (120V forward phase only)

REMOTE BOX ■ Remote box included when required by specification (eldoLED or Lutron dimming option). Available with IC and AIC housings only.

■ Above ceiling access required for servicing

■ Galvanized steel construction with separate line voltage and low voltage wiring compartments

■ 50ft remote distance maximum

LISTING / WARRANTY ■ 5-Year Intense LED Limited Warranty ■ ETL Listed to US and Canadian standards for damp locations ■ (-IC / -AIC Only) ETL listed for direct contact w/insulation ■ (-AIC Only) Air-Tight Certified ASTM E283. ■ (-AIC Only) Can be used to comply with Title 24, Part 6, JA8 high efficacy LED light source requirements

2-5/8”

5/8”IRRL200

5-1/8”

Ceiling Cutout: 2-7/8”

Ceiling Cutout: 2-7/8”

JOB NAME

CATALOG NUMBER

NOTES TYPE

GRAVITY L/M-0430:20 P-1

Intense Lighting3340 E La Palma Ave, Anaheim, CA 92806 | tel 714 630-9877 | fax 714 630-9883©2020 Intense Lighting, LLC. All rights reserved. Subject to change without notice.

OpticsDedicated 7° Narrow Spot with Field changeable 16° to 60° Optics

IP-OP45NSIP-OP45SPIP-OP45NFIP-OP45FLIP-OP45WFIP-OP45VF

(7° Narrow Spot)(16° Spot)(24° Narrow Flood)(36° Flood)(48° Wide Flood(60° Very Wide Flood)

AccessoriesPFL2-45PFL4-45

Hex LouverSoft Focus Film

Accessory Holder

Hex Louver

Soft Focus Film

Optic

New Construction Dimension (IC & Non-IC):

Ceiling Cutout: 2-7/8” Ceiling Cutout: 2-7/8”

5”

2-11/16”14-5/8”

4-9/16”8-5/8”

(IC Rated)

GD2R-MR(Mud Flange)

GD2R-MR(Mud Flange)

(Non-IC Rated)

Remodel Dimension (Non-IC):Remodel housings requres 5-1/2” of plenum space for installtion and serviceing.

4-9/16”

4-7/16”

3-3/4”2-11/16”

(Non-IC Rated)

5-1/8” 5-1/8”

7-1/2”

6” 1-11/16”

3-3/8”Remote Driver Box For Dimming Options

eldoLED 0-10V 1%eldoLED 0-10V 0.1%Lutron® LDE1 EcoSystem 1%Lutron® LTEA2W 2-Wire 1%

Note: Wires for class 2 LED driver require a minimum of 18 awg wire at a maximum of 50 feet length per local and national electrical regulations.

Remote Mounted Driver (For use with IC/AIC housings with eldoLED or Lutron dimming option)

■ Remote box included when required by specification (eldoLED or Lutron dimming option). Available with IC and AIC housings only. ■ Above ceiling access required for servicing ■ Galvanized steel construction with separate line voltage and low voltage wiring compartments ■ 50ft remote distance maximum

GD2AR2” Gravity LED Adjustable

JOB NAME

CATALOG NUMBER

NOTES TYPE

GRAVITY L/M-0430:20 P-2

Intense Lighting3340 E La Palma Ave, Anaheim, CA 92806 | tel 714 630-9877 | fax 714 630-9883©2020 Intense Lighting, LLC. All rights reserved. Subject to change without notice.

GD2AR2” Gravity LED Adjustable

IRRT200WL2Report #: ILL-20190114-1 (7)

LED PACKAGE MULTIPLIERS: IRAT200WL1 (x 0.84)

IRRT200 (5/8” REGRESS)Trim Multiplier (x 0.99)

CCT MULTIPLIERS: 82CRI2700K (x 0.93)3000K (x 1.00)3500K (x 1.00)

0.7’

1.0’

1.2’

1.5’

Intensity

Degree0°5°15°25°35°45°

CBCP26577643937468167

Watts: 16Lumens: 679

LPW: 42.4 CCT: 3000K

185fc

266fc

415fc

738fc

Beam Diameter

Foot-candlesat Nadir

12’

10’

8’

6’

Throw Distance

7° Narrow Spot

WL

FC

D

FC

D

LC W

L

W

D

C

D

L

W

C

L

W

CD0° HORIZONTAL 35° HORIZONTAL 35° VERTICAL

D FC W L D C FC W L D C FC W L

IRRT200WL2WL23000K

7° Spot

6’8’

10’12’

738415266185

0.730.981.221.46

0.730.981.221.46

6’8’

10’12’

4.25.67

8.4

406228146101

1.091.461.822.19

0.891.191.491.79

3’4’5’6’

4.35.77.18.6

557313201139

0.50.70.81

0.91.21.51.8

APPLICATION DATA:

W and L are the outer points where the candle power drops to 50% of maximum. FC are the initial foot candles at the center of the beam.

W Beam widthL Beam lengthC Distance to center of beamD DistanceFC Foot-candles

Illuminated width & length are based upon point at which illuminance falls to 50% of center illuminance. Recommended spacing is based upon uniform illuminance aiming angle is the angle between the lamp axis and the perpendicular to the illuminated plane.

WL

FC

D

FC

D

LC W

L

W

D

C

D

L

W

C

L

W

CD

WL

FC

D

FC

D

LC W

L

W

D

C

D

L

W

C

L

W

CD

35°

35°

JOB NAME

CATALOG NUMBER

NOTES TYPE

GRAVITY L/M-0430:20 P-3

Intense Lighting3340 E La Palma Ave, Anaheim, CA 92806 | tel 714 630-9877 | fax 714 630-9883©2020 Intense Lighting, LLC. All rights reserved. Subject to change without notice.

WL

FC

D

FC

D

LC W

L

W

D

C

D

L

W

C

L

W

CD0° HORIZONTAL 35° HORIZONTAL 35° VERTICAL

D FC W L D C FC W L D C FC W L

IRAT200WL2WL33000K

16° Spot

6’8’

10’12’

442248159110

1.72.22.83.3

1.72.22.83.3

6’8’

10’12’

4.25.67

8.4

2431368760

2.43.34.14.9

22.63.34

3’4’5’6’

4.25.77.18.5

33318712083

1.41.92.32.8

2.63.44.35.2

IRAT200WL2WL33000K

24° Narrow Flood

6’8’

10’12’

175986349

2.63.54.45.3

2.63.54.45.3

6’8’

10’12’

4.25.67

8.4

96543424

45.36.78

3.24.35.36.4

3’4’5’6’

4.25.77.18.5

132744733

2.33

3.84.6

4.45.97.48.9

IRAT200WL2WL33000K

36° Flood

6’8’

10’12’

116654129

3.44.65.76.9

3.44.65.76.9

6’8’

10’12’

4.25.67

8.4

64362316

5.37.18.910.6

4.25.67

8.4

3’4’5’6’

4.25.77.18.5

88493122

3456

6.28.310.412.5

IRAT200WL2WL33000K

48° Wide Flood

6’8’

10’12’

62352215

4.96.68.29.9

4.96.68.29.9

6’8’

10’12’

4.25.67

8.4

3419128

8.010.713.316.0

681012

3’4’5’6’

4.25.77.18.5

47271611

4.35.77.18.6

11.415.219

22.9

IRAT200WL2WL33000K

60° Very Wide Flood

6’8’

10’12’

39221410

6.99.211.513.8

6.99.211.513.8

6’8’

10’12’

4.25.67

8.4

211275

12.216.320.424.5

8.411.214

16.8

3’4’5’6’

4.25.77.18.5

3016107

681012

32.142.954.664.3

APPLICATION DATA:

W and L are the outer points where the candle power drops to 50% of maximum. FC are the initial foot candles at the center of the beam.

W: Beam widthL: Beam lengthC: Distance to center of beamD: DistanceFC: Foot-candles

Illuminated width & length are based upon point at which illuminance falls to 50% of center illuminance. Recommended spacing is based upon uniform illuminance aiming angle is the angle between the lamp axis and the perpendicular to the illuminated plane.

WL

FC

D

FC

D

LC W

L

W

D

C

D

L

W

C

L

W

CD

WL

FC

D

FC

D

LC W

L

W

D

C

D

L

W

C

L

W

CD

35°

35°

IRAT200WL3Report #: ILL-20190114-1 (16) ILL-20190114-1 (24) ILL-20190114-1 (36) ILL-20190114-1 (48) ILL-20190114-1 (60)

LED PACKAGE MULTIPLIERS: IRAT200WL1 (x 0.58)IRAT200WL2 (x 0.82)

IRRT200 (5/8” REGRESS)Trim Multiplier (x 0.99)

CCT MULTIPLIERS: 82CRI 92CRI2700K (x 0.93) (x 0.76)3000K (x 1.00) (x 0.87)3500K (x 1.00) (x 0.87)4000K (x 1.00) (x 0.87)

1.7’

2.2’

2.8’

3.3’

Intensity

Degree0°5°15°25°35°45°

CBCP159141301914982764413

Watts: 20Lumens: 1589

LPW: 79.4 CCT: 3000K

110fc

159fc

248fc

442fc

Beam Diameter

Foot-candlesat Nadir

12’

10’

8’

6’

Throw Distance

16° Spot

2.6’

3.5’

4.4’

5.3’

Intensity

Degree0°5°15°25°35°45°

CBCP63245589237460714825

Watts: 20Lumens: 1527

LPW: 76 CCT: 3000K

49fc

63fc

98fc

175fc

Foot-candlesat Nadir

24° Narrow Flood

Intensity

Degree0°5°15°25°35°45°

CBCP41993903227478923344

Watts: 20Lumens: 1497

LPW: 74 CCT: 3000K

29fc

41fc

65fc

116fc 3.4’

4.6’

5.7’

6.9’

Foot-candlesat Nadir

36° Flood

Intensity

Degree0°5°15°25°35°45°

CBCP224621661676924385103

Watts: 20Lumens: 1390

LPW: 69 CCT: 3000K

15fc

22fc

35fc

62fc 4.9’

6.6’

8.2’

9.9’

Foot-candlesat Nadir

48° Wide Flood

Intensity

Degree0°5°15°25°35°45°

CBCP143513931242921504170

Watts: 20Lumens: 1333

LPW: 66 CCT: 3000K

10fc

14fc

22fc

39fc 6.9’

9.2’

11.5’

13.8’

Foot-candlesat Nadir

60° Very Wide Flood

GD2AR2” Gravity LED Adjustable

JOB NAME

CATALOG NUMBER

NOTES TYPE

GRAVITY L/M-0430:20 P-4

Intense Lighting3340 E La Palma Ave, Anaheim, CA 92806 | tel 714 630-9877 | fax 714 630-9883©2020 Intense Lighting, LLC. All rights reserved. Subject to change without notice.