Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Commonwealth of Australia Gazette
No.TC17/25, Wednesday, 7 June 2017 Published by the Commonwealth of Australia
TARIFF CONCESSIONS
CONTENTS
TCO Applications ....................................................................................................... 2
TCO Applications Refused ........................................................................................ 7
TCOs Made.................................................................................................................. 8
Local Manufacturer Initiated - TCO Revocation Requests .................................. 11
Local Manufacturer Initiated - TCO Revocation Requests Refused ................... 12
Comptroller-General of Customs Initiated - Intention to Revoke Cancelled ..... 13
Local Manufacturer Initiated - TCOs Revoked ...................................................... 14
Local Manufacturer Initiated - TCOs Revoked and Re-Issued ............................ 16
Intention to Revoke TCOs not used in over 2 years ............................................. 18
TCOs Revoked - Unused for over 2 years ............................................................. 21
The Commonwealth of Australia Tariff Concessions Gazette (the Tariff Concessions Gazette) is free of charge on the DIBP
internet site at: http://www.border.gov.au/Busi/domestic-manufacturers-and-importers
The Tariff Concessions Administration Section is located at 5 Constitution Ave Canberra City 2601 Contact details: General Email Inquiries:……………………………[email protected] General Inquiries: ...............................................................(02) 6229 3567 TAPIN help desk: ................................................................(02) 6275 6534
Cat. No.
ISSN 0813-8389
©Commonwealth of Australia, 2017
http://www.border.gov.au/Busi/domestic-manufacturers-and-importers
2 TCO Applications Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
TCO Applications
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269K(1) - APPLICATIONS MADE FOR TARIFF CONCESSION ORDERS
Applications have been lodged for Tariff Concession Orders for the goods described in the following TABLE.
Australian manufacturers who wish to contest the granting of a Tariff Concession Order for the goods described
are invited to lodge a submission in writing in an approved form. Submissions must be lodged within 50 days
of the date of publication of this Notice.
The operative date (Op.) and TC reference number follow the description of goods.
Objections to the making of TCO submission forms are available at
http://www.border.gov.au/Forms/Documents/b444.pdf
Contact: Email [email protected]
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
5907.00.00 FABRICS, ASPHALT REINFORCEMENT GRID-COMPOSITE, bituminous
coated having NOT less than 60% bitumen, being EITHER of the
following:
(a) asphalt reinforced grid-composite, being knitted modulus
polyester yarns, having ALL of the following;
(i) tensile strength NOT LESS than 50 kN/m in machine
direction AND cross-machine direction;
(ii) residual strength NOT less than 80% of the
minimum tensile strength;
(iii) maximum elongation NOT greater than 12% at breaking
point;
(iv) aperture size 40 mm x 40 mm;
(v) non-woven polypropylene layer,
(b) asphalt reinforcement grid-composite, being knitted high
modulus polyvinyl-alcohol yarns, having ALL of the
following;
(i) tensile strength NOT less than 50 kN/m in machine
direction AND cross-machine direction;
(ii) residual strength NOT less than 80% of the minimum
tensile strength;
(iii) maximum elongation NOT greater than 6% at breaking
point;
(iv) aperture size 40 mm x 40 mm;
(v) polypropylene non-woven layer
Op. 26.04.17 - TC 1743607
Stated Use:
Reinforcement between or under layers of asphalt on roads,
runways and carparks to reduce reflective cracking
Applicant: HUESKER AUSTRALIA PTY LTD
50
5%
8421.99.90 PARTS, FILTER PRESS, being plates AND/OR frames
Op. 04.05.17 - TC 1745904
Stated Use:
Particulate removal from bio-plasma blood product suspension
Applicant: CSL BEHRING (AUSTRALIA) PTY LTD
50
5%
http://www.border.gov.au/Forms/Documents/b444.pdf
3 TCO Applications Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
8422.30.90 BOTTLE RINSING AND FILLING AND SEALING AND LABELLING MACHINES,
including ALL of the following:
(a) mono block rinsers;
(b) fillers;
(c) cappers AND/OR corkers;
(d) labellers
Op. 04.05.17 - TC 1746327
Stated Use:
To bottle whisky and also whisky cream (liquer)
Applicant: TRANSITAINER (VIC) PTY LTD
50
5%
8422.30.90 MEDICAL PLASTIC SATCHEL FILLING, SEALING AND LABELLING MACHINES,
incorporating a printer, with OR without pill, ampoule, bottle
OR medical kit feeders
Op. 09.05.17 - TC 1747551
Stated Use:
To package pills, ampoules, bottles or medical kits in small
plastic satchels and print identification, alert and advice
information labels
Applicant: METROTUBE AUSTRALIA PTY LTD
50
5%
8428.39.00 CROSS CHAIN CONVEYORS, programmable logic controlled, with OR
without guiding fences, having ALL of the following:
(a) width NOT greater than 16 m;
(b) length NOT greater than 17.2 m;
(c) motor power NOT greater than 9 kW
Op. 08.05.17 - TC 1747418
Stated Use:
Movement and handling of panels and billets as part
of a cross laminated timber panel production process
Applicant: XLAM AUSTRALIA PTY LTD
50
5%
8428.90.00 PALLETISE AND DEPALLETISE HANDLING SYSTEM, SORT AND PICK, GAS
CYLINDER, programmable logic controlled, including ALL of the
following:
(a) 6-axis robot cell;
(b) gas cylinder transfer gantry robot including ALL of the
following:
(i) bridge unit;
(ii) vertical module;
(iii) gantry structure,
(c) robot grippers;
(d) robot controls;
(e) pallet AND/OR palletised gas cylinder turntables;
(f) gas cylinder pallets;
(g) fences AND doors AND safety barriers;
(h) electrical cabling AND cabinets
Op. 04.05.17 - TC 1746323
Stated Use:
The function of the automated, robotic handling plant is to
sort, pick, palletise and depalletise gas cylinders
Applicant: BOC LTD
50
5%
4 TCO Applications Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
8428.90.00 STORAGE AND RETRIEVAL MACHINES, REEL AND/OR TRAY, having BOTH
of the following:
(a) barcode scanners;
(b) record keeping software
Op. 04.05.17 - TC 1746332
Stated Use:
Buffer storage unit used to record and store surface mount
device (SMD) reels and trays
Applicant: HW TECHNOLOGIES
50
5%
8428.90.00 ROTARY TABLES AND CONVEYOR BELTS, programmable logic controlled,
incorporating conveyed goods holding rails
Op. 10.05.17 - TC 1747838
Stated Use:
To transport goods in production lines such as transporting
pharmaceutical vials away from the vial filling and closing
machines for packing
Applicant: CSL BEHRING (AUSTRALIA) PTY LTD
50
5%
8477.59.00 EXPANDABLE POLYSTYRENE SHAPE MOULDING PLANT, including ALL of
the following:
(a) shape moulders;
(b) moulds;
(c) pre-expander;
(d) fluid bed;
(e) loading screw;
(f) granulator;
(g) deduster;
(h) hoppers;
(i) electrical controls;
(j) condensers;
(k) valves;
(l) filler guns;
(m) tanks;
(n) cooling fan;
(o) conveyors;
(p) pipes;
(q) hoists;
(r) unloaders;
(s) safety fences AND gates
Op. 03.05.17 - TC 1745727
Stated Use:
Manufacturing of 'waffle pods' used in concrete slab
construction from expandable polystyrene
Applicant: WAFFLE POD PTY LTD
50
5%
8479.89.90 CUTTING MACHINES, MEDICINE BLISTER PACK SHEET
Op. 09.05.17 - TC 1747765
Stated Use:
To cut medical pill blister pack sheets into uniform lengths
Applicant: METROTUBE AUSTRALIA PTY LTD
50
5%
5 TCO Applications Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
8479.89.90 NAPPY CORE MACHINES, having ALL of the following:
(a) filtration unit;
(b) powder meters AND conveyors;
(c) core forming drum
Op. 11.05.17 - TC 1748671
Stated Use:
Nappy manufacturing
Applicant: ONTEX MANUFACTURING PTY LTD
50
5%
8479.89.90 CORE WRAPPING AND CUTTING MACHINES, NAPPY, having ALL of the
following:
(a) core wrap unwinding AND splicing module;
(b) acquisition layer unwinding AND splicing module;
(c) combined acquisition layer applicator AND core cutting
module, including gluing module
Op. 11.05.17 - TC 1748674
Stated Use:
Nappy manufacturing
Applicant: ONTEX MANUFACTURING PTY LTD
50
5%
8479.89.90 NAPPY EAR FABRICATION AND APPLICATION MACHINE, having ALL of the
following:
(a) integrated nappy back ear unwinding AND splicing AND
shaping module;
(b) integrated nappy front ear unwinding and splicing module;
(c) integrated front ear transport AND application AND cutting
module, including gluing module;
(d) nappy back ear bonding unit;
(e) front ear shaping AND cutting unit;
(f) back ear shaping AND cutting unit;
(g) back ear transport AND application AND cutting unit,
including gluing module
Op. 11.05.17 - TC 1748678
Stated Use:
Nappy manufacturing
Applicant: ONTEX MANUFACTURING PTY LTD
50
5%
8479.89.90 FOLDING AND CUTTING MACHINES, NAPPY
Op. 11.05.17 - TC 1748686
Stated Use:
Nappy manufacturing
Applicant: ONTEX MANUFACTURING PTY LTD
50
5%
8479.89.90 TOP AND BACK SHEET MACHINES, NAPPY, having ALL of the
following:
(a) back sheet unwinding AND splicing unit;
(b) elastic unwinders;
(c) top sheet unwinding AND splicing unit;
(d) frontal tape unwinders AND splicing unit;
(e) frontal tape application AND cutting unit, including
gluing module
Op. 11.05.17 - TC 1748690
Stated Use:
Nappy manufacturing
Applicant: ONTEX MANUFACTURING PTY LTD
50
5%
6 TCO Applications Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
8479.89.90 PULL AND PRESS MACHINES, NAPPY
Op. 11.05.17 - TC 1748694
Stated Use:
Nappy manufacturing
Applicant: ONTEX MANUFACTURING PTY LTD
50
5%
8479.89.90 MAKE UP CLAMPS, RISER CONNECTION, OIL AND/OR GAS WELL, hydraulic
rollers
Op. 15.05.17 - TC 1749304
Stated Use:
Pressurised connection on large diameter riser pipes in the oil
and gas industry
Applicant: SHELL AUSTRALIA PTY LTD
50
5%
8503.00.00 PARTS, ACTUATOR, electric, multi-turn, being a housing sub-
assembly consisting of ALL of the following:
(a) declutch lever;
(b) encoder;
(c) encoder drive cartridge;
(d) control panel;
(e) control module;
(f) terminal block;
(g) power board;
(h) main board;
(i) gear case AND electronics covers
Op. 04.05.17 - TC 1746334
Stated Use:
Parts for Valve Actuators to open and close valves which control
the flow of liquids
Applicant: ACRODYNE PTY LTD
50
5%
8536.50.99 SWITCHES, MICROPROCESSOR ADDRESSABLE, with OR without wiring,
having BOTH of the following:
(a) electric current rating NOT less than 60 mA and NOT
greater than 275 mA;
(b) voltage rating NOT less than 50 V and NOT greater
than 600 V
Op. 09.05.17 - TC 1747425
Stated Use:
To limit inadvertent detonations in mining operations
Applicant: SCHLUMBERGER AUSTRALIA PTY LTD
50
5%
8709.11.00 TROLLEYS, self-propelled, electro-hydraulic, remote controlled,
including ALL of the following:
(a) rated load capacity NOT greater than 75 metric tonnes;
(b) platform width NOT greater than 3 metres;
(c) platform length NOT less than 8 metres
Op. 11.05.17 - TC 1748669
Stated Use:
Movement of heavy goods within a restricted space
Applicant: SHELL AUSTRALIA PTY LTD
50
5%
7 TCO Applications Refused Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
TCO Applications R efused
CUSTOMS ACT 1901
NOTICE PURSUANT TO SECTION 269R(1) - APPLICATIONS FOR TARIFF CONCESSION ORDERS REFUSED
The application for the Tariff Concession Order for the goods described in the following TABLE has been
refused.
Contact: Email [email protected]
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification
8438.80.00 MIXERS, programmable logic controlled, including ALL of the
following:
(a) mixing chamber volume capacity NOT less than 1 000 L;
(b) mixer motor;
(c) heating AND cooling jacket;
(d) agitator;
(e) vacuum pump;
(f) bin elevator;
(g) discharge pump
Op. 30.11.16 - TC 1674249
Reason for refusal:
Substitutable goods produced in Australia in the ordinary course
of business by Inox Fabrications Australia Pty Ltd, Epping, Vic
50
8 TCOs Made Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
TCOs M ade
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269R(1) - TARIFF CONCESSION ORDERS MADE
Tariff Concession Orders have been made for the goods described in the following TABLE.
The operative date (Op.) and TC reference No. follow the description of goods. Local manufacturers of
substitutable goods may request the revocation of TCOs at any time.
Contact: Email [email protected]
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification
3506.91.90 TAPE, double side adhesive, having ALL of the following:
(a) tissue paper backing;
(b) polyethylene liner paper;
(c) acrylic OR rubber base glue
Op. 28.02.17 Dec. date 31.05.17 - TC 1724280
50
3926.90.90 BAGS, BIOREACTOR, having connection tubes
Op. 28.02.17 Dec. date 31.05.17 - TC 1724490
50
7302.10.00 RAIL TRACK SYSTEM, PAPERBOARD TRANSFER CAR, including ALL of the
following:
(a) rails with mounting brackets;
(b) bearing plates;
(c) stoppers
Op. 15.02.17 Dec. date 30.05.17 - TC 1721412
50
7326.90.90 FLUE GAS DUCTS, RECUPERATOR, GAS RECOVERY SYSTEM, including ALL
of the following:
(a) modules;
(b) flanges;
(c) adapters;
(d) plates;
(e) shims;
(f) compensator
Op. 02.03.17 Dec. date 02.06.17 - TC 1725296
50
7326.90.90 PALLET INLOADERS, with OR without ANY of the following:
(a) stabiliser with OR without braces;
(b) safety pins;
(c) stanchions AND/OR struts;
(d) supports, metal AND/OR wood AND/OR rubber;
(e) document compartment
Op. 14.03.17 Dec. date 02.06.17 - TC 1728231
50
8412.90.90 PARTS, HYDRAULIC MOTOR, downhole, being lower assemblies
including ALL of the following:
(a) transmission;
(b) fixed bend housing;
(c) driveshaft sub-assembly including ALL of the following:
(i) bearings;
(ii) catch;
(iii) spacers,
(d) stator adaptor housing
Op. 03.03.17 Dec. date 02.06.17 - TC 1725509
50
8421.29.90 WASTE WATER AND SLURRY FILTRATION AND SEPARATOR MACHINES,
including ALL of the following:
(a) vibrating screen;
(b) water spray bars;
(c) screen mats;
(d) sump;
(e) pump;
(f) hydrocyclone;
(g) dewatering screen
Op. 08.03.17 Dec. date 31.05.17 - TC 1726837
50
9 TCOs Made Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification
8421.39.90 CONTAMINATION ABATEMENT GAS TREATMENT PLANT, including ALL of
the following:
(a) inorganic pollutant AND gas scrubbers with ejectors;
(b) trichlorosilane scrubber;
(c) adsorber;
(d) valves;
(e) pH AND flow analysers;
(f) pumps;
(g) pressure AND flow AND filling controls;
(h) regenerative thermal oxidiser
Op. 23.02.17 Dec. date 31.05.17 - TC 1723162
50
8427.10.00 TRANSFER TRUCKS, HOSPITAL BED, battery powered
Op. 14.03.17 Dec. date 31.05.17 - TC 1728222
50
8428.90.00 SUBSEA PIPELINE REPAIR MACHINES, being EITHER of the following:
(a) pipeline tool pushing AND pulling machines;
(b) pipeline alignment AND/OR lifting frames, hydraulically
operated, having ALL of the following:
(i) remotely operated vehicle interface panel;
(ii) hydraulic cylinders;
(iii) claw pipe grapple;
(iv) skirted foundation box;
(v) mud securing steel mats, with OR without hydraulic
actuated rails;
(vi) pipe spool deployment guides
Op. 23.02.17 Dec. date 31.05.17 - TC 1723159
50
8428.90.00 TURNSTILES, STEEL COIL STORAGE
Op. 08.03.17 Dec. date 31.05.17 - TC 1726838
50
8428.90.00 BRIDGE STACKERS, STEEL COIL, having a maximum lifting capacity
of 5 000 kg per coil
Op. 14.03.17 Dec. date 02.06.17 - TC 1728217
50
8428.90.00 COIL CARS, STEEL SLITTING LINE, being ANY of the following:
(a) flexible coil storage cars;
(b) fixed coil storage saddle cars;
(c) entry coil cars;
(d) exit coil cars
Op. 16.03.17 Dec. date 02.06.17 - TC 1729043
50
8431.39.00 PARTS, ARMOURED FACE MINING CONVEYOR, being dumbbell shaped
connector assemblies, consisting of ALL of the following:
(a) dumbbell shaped connector;
(b) linchpins;
(c) retainers
Op. 23.02.17 Dec. date 31.05.17 - TC 1723052
50
8438.20.00 CHOCOLATE MANUFACTURING LINE, having ALL of the following:
(a) raw material handling AND transfer AND storage AND
pigging stations;
(b) storage vessels;
(c) mixers;
(d) blending AND dosing station;
(e) chocolate refiners AND conches stations;
(f) transfer pumps;
(g) storage tanks;
(h) piping
Op. 07.03.17 Dec. date 02.06.17 - TC 1726515
50
10 TCOs Made Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification
8474.10.00 PULSATING JIG ASSEMBLIES, MINERAL ORE PROCESSING PLANT,
including ALL of the following:
(a) jig sumps;
(b) screens;
(c) control panel;
(d) screen vibrators;
(e) jig frame;
(f) sprayers;
(g) pumps
Op. 06.03.17 Dec. date 31.05.17 - TC 1726088
50
8479.89.90 WASTE SEPARATION MACHINES, including ALL the following:
(a) vacuum OR blower;
(b) diesel OR hydraulic OR electric powered fan;
(c) vacuum OR blower head connector,
with OR without hoses
Op. 23.02.17 Dec. date 31.05.17 - TC 1723302
50
8479.89.90 SHOCK ABSORBERS, VISCOELASTIC VIBRATION DAMPING, including BOTH
of the following:
(a) viscous fluid, being ANY of the following:
(i) bitumen;
(ii) polybutene;
(iii) silicone based,
(b) top plate mounted piston
Op. 08.03.17 Dec. date 31.05.17 - TC 1726836
50
8483.40.90 PUMP DRIVES, PROGRESSIVE CAVITY PUMPING, top mount, electric
AND/OR hydraulic, complying with International Standard 15136-2
(ISO 15136-2), being belt OR gear driven, having ANY of the
following:
(a) motor;
(b) stuffing box;
(c) fittings;
(d) adapter plates AND flex couplings;
(e) low stuffing box pressure switch;
(f) tachometer;
(g) stand;
(h) polished rod hold down hook;
(i) mechanical AND/OR hydraulic braking
Op. 15.02.17 Dec. date 31.05.17 - TC 1721331
50
8504.40.90 CHARGERS, COMPUTER TABLETS, electromagnetic induction
Op. 24.02.17 Dec. date 31.05.17 - TC 1723470
50
9028.20.10 WATER METERS, TURBINE, nominal size DN being ANY of the
following:
(a) 40;
(b) 50;
(c) 65;
(d) 80;
(e) 100;
(f) 150
Op. 02.03.17 Dec. date 31.05.17 - TC 1725016
50
11 Local Manufacturer Initiated - TCO Revocation Requests Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
Local M anufac tur er Initiated - TC O R evocation R equests
NOTIFICATION OF AN AUSTRALIAN INDUSTRY REVOCATION REQUEST - SECTION 269SC(1A) CUSTOMS ACT
An application has been lodged for revocation of the Tariff Concession Order set out in the following TABLE.
The Lodgement Request Date shown in the table below is the intended revocation date for the Tariff Concession
Order which will take effect should the application for revocation be successful.
Importations not covered by in-transit provisions may be subject to post action as any decision to revoke an
order is backdated to the date of request for revocation.
Contact: Email [email protected]
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Lodgement Request Date
8705.90.00 TRUCKS, incorporating ALL of the following:
(a) compression ignition engine;
(b) view cameras;
(c) spray bars;
(d) brushes;
(e) water blasting machine
Op. 23.01.17 Dec. date 18.04.17 - TC 1708451
50
26.05.17
12 Local Manufacturer Initiated - TCO Revocation Requests Refused Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
Local M anufac tur er Initiated - TC O R evocation R equests Refused
CUSTOMS ACT 1901
NOTICE PURSUANT TO SECTION 269SE(1) - REFUSAL TO REVOKE A TARIFF CONCESSION ORDER CUSTOMS ACT 1901
The Request for revocation of Tariff Concession Orders for goods described in the following TABLE have been
refused.
Contact: Email [email protected]
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification
8402.90.00 PARTS, STEAM GENERATION WATER-TUBE BOILER, ALUMINA PLANT, being
ANY of the following:
(a) buckstays;
(b) downcomers;
(c) headers;
(d) tubes or pipes, cut to shape;
(e) inner casings;
(f) pipe assemblies, being ANY of the following:
(i) roofs;
(ii) floors;
(iii) noses;
(iv) panels
Op. 13.01.09 - TC 0900688
50
8402.90.00 PARTS, STEAM GENERATOR, POWER GENERATION PLANT, being ANY of the
following:
(a) inlet transition duct unit;
(b) inlet plenum;
(c) exhaust hood unit;
(d) stack adapter;
(e) exhaust stack unit;
(f) once through steam generator AND ducting erection joint
assembly kits, consisting of BOTH of the following:
(i) sheet metal sealing strips AND fastenings;
(ii) insulation,
(g) piping, valves AND instrumentation consisting of ALL of
the following:
(i) high pressure AND low pressure vent stack;
(ii) high pressure steam outlet piping;
(iii) low pressure steam outlet piping;
(iv) pilot-operated relief valve piping;
(v) high pressure feedwater inlet piping;
(vi) low pressure feed water inlet piping
Op. 06.01.16 - TC 1600940
50
8403.90.00 PARTS, INDUSTRIAL GLASSHOUSE WETBACK BOILER, being ANY of the
following:
(a) tanks;
(b) shell and crown rings;
(c) spray tubes;
(d) overflows;
(e) manholes
Op. 23.08.10 - TC 1038767
50
8404.10.00 AUXILIARY PLANT, STEAM BOILER, being superheater attemperators
with supports
Op. 04.01.11 - TC 1100392
50
13 Local Manufacturer Initiated - TCO Revocation Requests Refused and
Comptroller-General of Customs Initiated - Intention to Revoke
Cancelled
Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification
8404.90.00 PARTS, STEAM GENERATION BOILER AUXILIARY PLANT, being ANY of the
following:
(a) plates;
(b) chock liners;
(c) supports;
(d) fluid accumulators;
(e) junction boxes (non-electrical);
(f) control devices
Op. 18.02.08 - TC 0802705
50
Comptroller-Gener al of C ustoms Initi ated - Intention to R evoke C ancelled
CUSTOMS ACT 1901
CANCELLATION OF THE INTENTION TO REVOKE
The Request for revocation of the Tariff Concession Order for goods described in the following TABLE has been
cancelled.
Contact: Email [email protected]
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification
3926.90.90 PACKERS, GROUT HOLE, expandable pressurised injection
Op. 30.09.05 Dec. date 23.12.05 - TC 0513347
50
14 Local Manufacturer Initiated - TCOs Revoked Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
Local M anufac tur er Initiated - TC Os R evoked
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269SE(1) - AUSTRALIAN INDUSTRY INITIATED - TARIFF CONCESSION
ORDERS REVOKED
The Tariff Concession Orders for the goods described in the following TABLE have been revoked.
Contact: Email [email protected]
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
8402.12.00 BOILERS, WATERTUBE, STEAM, solid fuel, having BOTH of the
following:
(a) heat output NOT greater than 5 000 kW;
(b) mechanical stoker
Op. 20.03.09 Dec. date 05.06.09 - TC 0909455
Substitutable goods produced in Australia in the ordinary
course of business by W. Simons & Sons (Aust) Pty Ltd,
Alexandria, NSW. In transit provisions apply
50
04.04.17
8402.19.00 VAPOUR GENERATORS, CONCRETE CURING, having ALL of the following:
(a) generator output NOT greater than 450 kW;
(b) water cooled combustion chamber;
(c) water cooled pre-mix burner;
(d) temperature sensors AND controllers;
(e) noise insulated enclosure
Op. 19.01.16 Dec. date 11.04.16 - TC 1602954
Substitutable goods produced in Australia in the ordinary
course of business by W. Simons & Sons (Aust) Pty Ltd,
Alexandria, NSW. In transit provisions apply
50
17.04.17
8402.20.00 BOILERS, STEAM, SUPERHEATED, HIGH PRESSURE
Op. 29.09.06 Dec. date 15.12.06 - TC 0615151
Substitutable goods produced in Australia in the ordinary
course of business by W. Simons & Sons (Aust) Pty Ltd,
Alexandria, NSW. In transit provisions apply
50
17.04.17
8403.10.00 BOILERS, HOT WATER, STOKER FED SOLID FUEL, having ALL of the
following:
(a) heat output NOT greater than 300 kW;
(b) mechanical stoker and hearth access;
(c) adjustable heating surface area
Op. 21.02.08 Dec. date 16.05.08 - TC 0803012
Substitutable goods produced in Australia in the ordinary
course of business by W. Simons & Sons (Aust) Pty Ltd,
Alexandria, NSW. In transit provisions apply
50
04.04.17
8403.10.00 BOILERS, HOT WATER, solid fuel, having ALL of the following:
(a) power NOT greater than 1 000 kW;
(b) stoker;
(c) tube cleaner;
(d) ash remover
Op. 19.11.09 Dec. date 05.02.10 - TC 0943670
Substitutable goods produced in Australia in the ordinary
course of business by W. Simons & Sons (Aust) Pty Ltd,
Alexandria, NSW. In transit provisions apply
50
04.04.17
15 Local Manufacturer Initiated - TCOs Revoked Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
8403.10.00 GREENHOUSE CENTRAL HEATING BOILERS, diesel, having ALL of the
following:
(a) heating capacity NOT less than 25 000 square metres;
(b) chimney;
(c) pipes;
(d) control panels;
(e) water pumps
Op. 13.01.12 Dec. date 02.04.12 - TC 1201625
Substitutable goods produced in Australia in the ordinary
course of business by W. Simons & Sons (Aust) Pty Ltd,
Alexandria, NSW. In transit provisions apply
50
04.04.17
8403.10.00 HYDRONIC HOT WATER HEATING PLANT, biomass solid fuel,
programmable logic controlled, including ALL of the following:
(a) conveyors;
(b) furnace;
(c) fans;
(d) de-ashing boiler module;
(e) boilers;
(f) combustion pre-heater;
(g) emission control module;
(h) flues
Op. 21.11.13 Dec. date 10.02.14 - TC 1338996
Substitutable goods produced in Australia in the ordinary
course of business by W. Simons & Sons (Aust) Pty Ltd,
Alexandria, NSW. In transit provisions apply
50
04.04.17
16 Local Manufacturer Initiated - TCOs Revoked and Re-Issued Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
Local M anufac tur er Initiated - TC Os R evoked and Re-Issued
CUSTOMS ACT 1901
NOTICE PURSUANT TO SECTION 269SE(1)&(2) - TARIFF CONCESSION ORDERS REVOKED AND NEW TARIFF CONCESSION ORDERS
MADE
Tariff Concession Orders for the goods described in the following TABLE have been revoked and new Tariff
Concession Orders have been made in respect of the goods described below.
The operative date (Op.), decision date (Dec. date) and TC reference number follow the description of goods.
In-transit provisions apply.
Contact: Email [email protected]
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
TCO REVOKED
8402.19.00 GENERATORS, PURE STEAM, including ALL of the following:
(a) separator columns;
(b) valves;
(c) sensors
Op. 11.04.12 Dec. date 02.07.12 - TC 1211650
Substitutable goods produced in Australia in the ordinary
course of business by W. Simons & Son (Aust) Pty Ltd,
Alexandria, NSW. TCO 1211650 revoked and reissued as TC
1757420. In transit provisions apply
50
04.04.17
TCO REISSUED
8402.19.00 GENERATORS, PURE STEAM, stainless steel construction, including
ALL of the following:
(a) separator columns;
(b) valves;
(c) sensors
Op. 05.04.17 Dec. date 02.06.17 - TC 1757420
50
TCO REVOKED
8404.10.00 AUXILIARY PLANT, STEAM GENERATION BOILER, comprising ANY of the
following:
(a) windboxes;
(b) furnace walls, being water or convection;
(c) superheaters, preheaters or airheaters;
(d) sootblowers;
(e) ash handlers;
(f) deaerators;
(g) coal bunkers;
(h) steam drums;
(i) tanks, being flash, pressure or blowdown vessels;
(j) attemperators
Op. 10.06.10 Dec. date 05.08.10 - TC 1034450
Substitutable goods produced in Australia in the ordinary
course of business by W. Simons & Sons (Aust) Pty Ltd,
Alexandria, NSW.TCO 1034450 revoked and reissued as TC 1757417.
In transit provisions apply
50
04.04.17
mailto:[email protected]
17 TCOs Revoked - Unused for over 2 years Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
TCO REISSUED
8404.10.00 AUXILIARY PLANT, STEAM GENERATION BOILER, comprising ANY of the
following:
(a) windboxes;
(b) superheaters, preheaters or airheaters;
(c) sootblowers;
(d) attemperators
(e) ash handlers;
(f) deaerators;
(g) coal bunkers
Op. 05.04.17 Dec. date 02.06.17 - TC 1757417
50
18 Intention to Revoke TCOs not used in over 2 years Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
Intention to Revoke TC Os not used i n over 2 years
TARIFF CONCESSION ORDERS (TCOs) NOT USED IN THE PREVIOUS 2 YEARS
The Comptroller-General of Customs is satisfied that the TCOs listed in the table below are no longer required
because, in the 2 years preceding the day of this notice, they have not been quoted in an import declaration
to secure a concessional rate of duty.
From Thursday, 6 July 2017, it is intended to take action to revoke these Orders under subsection 269SD (1A)
of the Customs Act 1901. In accordance with subsection 269SG (2) of the Customs Act 1901, in transit
provisions shall apply. If revoked, the expected date of effect will be 5 July 2017.
Interested parties are invited to provide, by close of business, Wednesday 5 July 2017, written reasons why an
Order should NOT be revoked.
Please advise if any of the Orders listed below have been quoted on an import declaration.
If a request is made to retain an Order used for the granting of a Determination, please specify the
Determination and the linked Item number to enable mapping to the Order and its scope.
THE TABLE
______________________________________________________________________________________________________________
Tariff
Classification Description Concession Number
______________________________________________________________________________________________________________
3926.90.90 WALL DECORATIONS, SILHOUETTE, depicting cartoon characters
Op. 28.02.02 Dec. date 24.05.02 - TC 0201801
3926.90.90 WALL HOOKS, plastic, incorporating children’s cartoon character
Op. 06.01.03 Dec. date 14.03.03 - TC 0300133
5907.00.00 FABRIC, cotton OR polyester base cloth, flock coated on one side,
consisting of an embossed flock finish of rayon pile of 0.8 to
1.0 denier (both inclusive)
Op. 02.08.01 Dec. date 28.12.01 - TC 0106712
5911.90.90 PAPER DRYER FABRIC, synthetic, unfinished, having ALL of the
following:
(a) warp density NOT less than 110 yarn/dm but NOT exceeding
350 yarn/dm;
(b) pick count of NOT less than 40 yarn/50 mm but NOT exceeding
120 yarn/50 mm;
(c) monofilament having a cross section diameter of NOT less than
0.40 mm but NOT exceeding 1.00 mm
Op. 15.11.97 Dec. date 12.06.02 - TC 0204922
6006.31.00 FABRIC, knitted, 0.1 denier fibre
Op. 01.01.02 Dec. date 14.01.02 - TC 0108354
6305.32.00 CONTAINERS, FLEXIBLE INTERMEDIATE BULK, compliant with
AS 3668 1989, and the Australian Code for the transport
of dangerous goods by road and rail, comprising ALL of the
following:
(a) single point lift with a double sewn protective sleeve;
(b) container body U.V. treated circular woven polypropylene;
(c) open top;
(d) container having star sewn closed bottom;
(e) low density polyethylene bottleneck type suspended liner
with breather patches and holes;
(f) safe working load of NOT less than 1 200 kg
Op. 19.12.03 Dec. date 31.03.04 - TC 0315793
19 Intention to Revoke TCOs not used in over 2 years Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
6815.99.00 LADLE SIDE INJECTION DEVICES, refractory gas or reagent, having four
or more treatment ports, with or without injection lances
Op. 28.10.93 Dec. date 04.02.94 - TC 9312650
7323.93.00 COFFEE PERCOLATORS, stovetop, complete with 18/8 grade stainless
steel pump and basket
Op. 29.10.93 Dec. date 04.02.94 - TC 9312673
8413.50.10 PUMPS, TRIPLE PLUNGER (TRIPLEX), having ALL of the following:
(a) output flow greater than 500 litres/minute;
(b) working pressure greater than 30 000 kPa (300 bar);
(c) plunger stroke greater than 125.0 mm
Op. 06.02.03 Dec. date 02.05.03 - TC 0301206
8439.99.00 HEAD BOX TURBULENCE FLOW SHEETS, of graphite composite OR
poly-carbonate
Op. 06.06.01 Dec. date 24.08.01 - TC 0104646
8451.80.00 HEAT SETTING LINE, CARPET YARN, comprising ALL of the following:
(a) yarn creel;
(b) yarn prefeeder;
(c) heat setting chamber;
(d) yarn dryer;
(e) yarn accumulator;
(f) friezing machine
Op. 19.05.00 Dec. date 28.07.00 - TC 0004873
8474.39.00 MIXERS, COUNTER CURRENT, comprising ALL of the following:
(a) inclined counter rotating mixing pan with an outside diameter
NOT less than 2.5 metre/s and height NOT less than 1 metre/s;
(b) self-cleaning, having wall and bottom scrapers;
(c) self-discharging;
(d) rotating mixing tool with a speed NOT less than 300 rpm;
(e) mixing tool drive motor greater than 150 kw;
(f) mixing cycle time NOT greater than 3 minutes at 1.5 tonnes
per batch
Op. 04.12.03 Dec. date 15.04.04 - TC 0315321
8477.59.00 CAPSULE MAKER, BOTTLE
Op. 30.04.03 Dec. date 25.07.03 - TC 0305028
8479.89.90 WHEEL AND TYRE MOUNTING LINES, computer controlled
Op. 12.08.02 Dec. date 25.10.02 - TC 0207215
8481.80.90 VALVES, BLAST FURNACE, being ANY of the following:
(a) hot blast valves;
(b) waste OR mixed gas shut off valves;
(c) cold blast shut off valves;
(d) cold blast valves
Op. 27.06.01 Dec. date 07.09.01 - TC 0105142
8481.80.90 SLIDING GATE MACHINES, STEEL LADLE
Op. 15.02.02 Dec. date 10.05.02 - TC 0201393
8481.80.90 CHRISTMAS TREES, HORIZONTAL, SUBSEA WELL
Op. 18.06.02 Dec. date 06.09.02 - TC 0205188
3926.90.90 TRANSPARENCIES, COMPUTER PRINTER OR PRINTER-PLOTTER
Op. 22.02.00 Dec. date 12.05.00 - TC 0001947
20 Intention to Revoke TCOs not used in over 2 years Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
8483.90.00 PARTS, STEEL STRIP ROLLING MILL ROLL END COUPLINGS, being ANY of
the following:
(a) roll end casings;
(b) drive end casings;
(c) lip or glyd seal retainer housings;
(d) spindles;
(e) gear rings;
(f) hub gears;
(g) thrust buttons;
(h) buffer rings;
(i) spring stops
Op. 14.03.01 Dec. date 25.05.01 - TC 0102346
8483.90.00 PARTS, STEEL STRIP ROLLING MILL ROLL END COUPLINGS, being ANY of
the following:
(a) thrust plates;
(b) spring guides;
(c) drive end ring gears;
(d) seal retainers and seal housings;
(e) spherical bushings and spherical rings;
(f) end plates,
but NOT including ANY parts for couplings with a motor power
rating of less than 4 100 kilowatts
Op. 22.05.01 Dec. date 23.10.01 - TC 0104261
8501.53.00 MOTORS, AC, MULTIPHASE, SQUIRREL CAGE, purged and pressurised,
having an output exceeding 500kW
Op. 11.02.00 Dec. date 28.04.00 - TC 0001649
8516.29.00 HEATERS, FLOOR STANDING, domestic, comprising ALL of the following:
(a) height NOT greater than 36 cms;
(b) width NOT greater than 24 cms;
(c) power consumption NOT greater than 1 700 watts;
(d) gross weight NOT greater than 3.5 kgs;
(e) ceramic elements
Op. 17.04.03 Dec. date 11.07.03 - TC 0304251
9001.10.00 FIBRES, OPTICAL, non-zero dispersion shifted, conforming
to ITU-T G.655
Op. 13.09.02 Dec. date 13.12.02 - TC 0208495
9506.99.90 GAME OR SPORT STANDARDS, being posts, with ratchet tensioning reel
Op. 03.04.02 Dec. date 21.06.02 - TC 0202734
9603.90.00 SWEEPERS, FLOOR, with electrostatic cloth covers of non-woven
polyester fibre
Op. 23.04.01 Dec. date 29.06.01 - TC 0103429
21 TCOs Revoked - Unused for over 2 years Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
TCOs R evoked - U nused for over 2 years
CUSTOMS ACT 1901
NOTICE PURSUANT TO SECTION 269SE(2) - TARIFF CONCESSION ORDER REVOCATION AT THE INITIATIVE OF THE COMPTROLLER-
GENERAL OF CUSTOMS
The Tariff Concession Orders listed in THE TABLE below have has not been used for at least 2 years and have
been revoked under Section 269SD(1A). In transit provisions apply.
The intention to revoke these orders was notified in Gazette TC17/19 dated 26 April 2017.
Contact: Email [email protected]
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
3920.99.00 TAPE, SWELLING, acrylate polymers in rolls
Op. 22.12.05 Dec. date 22.03.06 - TC 0605481
2 Years non use. In transit provisions apply
50
23.05.17
3926.90.90 LINERS, CONCRETE, HIGH DENSITY POLYETHYLENE OR POLYPROPYLENE,
THERMOPLASTIC, having BOTH of the following:
(a) conical anchor studs on one side;
(b) thickness NOT less than 2.0 mm and NOT greater than 10 mm
Op. 17.03.06 Dec. date 09.06.06 - TC 0605450
2 Years non use. In transit provisions apply
50
23.05.17
4016.99.00 BELLOWS, FUME EXHAUST, PICKLE LINE TANK
Op. 24.04.06 Dec. date 14.07.06 - TC 0607300
2 Years non use. In transit provisions apply
50
23.05.17
5603.12.00 FABRIC, comprising BOTH non-woven polypropylene AND
polypropylene microhook film
Op. 16.02.06 Dec. date 21.04.06 - TC 0603913
2 Years non use. In transit provisions apply
50
23.05.17
8417.10.00 FURNACES, SLAG, comprising ALL of the following:
(a) sootblowers;
(b) heat exchangers;
(c) waste heat boilers;
(d) condensers;
(e) coal mills;
(f) recuperators;
(g) cooling towers;
(h) blowers;
(i) dewatering bins;
(j) ladles;
(k) crane;
(l) dust collectors;
(m) rotary kilns;
(n) refractories;
(o) scrubbers;
(p) coolers;
(q) thickeners;
(r) cyclones;
(s) grinding mills
Op. 08.02.06 Dec. date 28.04.06 - TC 0603545
2 Years non use. In transit provisions apply
50
23.05.17
22 TCOs Revoked - Unused for over 2 years Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
8417.80.00 OVENS, FINISH, CONTINUOUS PAINT LINE, having ALL of the
following:
(a) NOT less than three heating zones;
(b) metal throughput greater than 33 000 kg/hour;
(c) natural gas fired
Op. 21.03.06 Dec. date 02.06.06 - TC 0605458
2 Years non use. In transit provisions apply
50
23.05.17
8417.80.00 OVENS, PRIME, CONTINUOUS PAINT LINE, having ALL of the following:
(a) four heating zones;
(b) metal throughput NOT less than 33 000 kg/hour;
(c) maximum solvent load NOT greater than 300 litres/hour;
(d) recirculation flow NOT less than 160 000 cubic metres/hour;
(e) natural gas fired
Op. 03.05.06 Dec. date 21.07.06 - TC 0607779
2 Years non use. In transit provisions apply
50
23.05.17
8417.90.00 PARTS, FINISH OVENS, CONTINUOUS PAINT LINE, being ANY of the
following:
(a) flashings;
(b) ducts;
(c) bases;
(d) air and/or distribution boxes;
(e) filler plates;
(f) lifting lugs;
(g) gaskets;
(h) rail guard supports;
(i) quench partitions
Op. 06.04.06 Dec. date 30.06.06 - TC 0606245
2 Years non use. In transit provisions apply
50
23.05.17
8417.90.00 PARTS, PRIME OVENS, CONTINUOUS PAINT LINE, being ANY of the
following:
(a) insulated panels;
(b) ducts;
(c) frames;
(d) burner supports;
(e) insulation;
(f) inside roof flashes and/or floor flashes;
(g) exhausts
Op. 03.05.06 Dec. date 28.07.06 - TC 0607776
2 Years non use. In transit provisions apply
50
23.05.17
8419.50.90 NIOBIUM SHELL AND TUBE HEAT EXCHANGERS, PICKLE LINE
Op. 13.02.06 Dec. date 28.04.06 - TC 0603729
2 Years non use. In transit provisions apply
50
23.05.17
8428.90.00 LOADING AND/OR UNLOADING STATIONS, ANODISING LINE
Op. 08.02.06 Dec. date 21.04.06 - TC 0603549
2 Years non use. In transit provisions apply
50
23.05.17
8428.90.00 FEEDERS AND WEIGHERS, bentonite
Op. 11.04.06 Dec. date 07.07.06 - TC 0606865
2 Years non use. In transit provisions apply
50
23.05.17
8479.50.90 ROBOTICS, LABORATORY, MICRO ORGANISM PICKERS, having BOTH of the
following:
(a) image analyser;
(b) single picking head containing NOT less than 96 picking pins
Op. 01.03.06 Dec. date 19.05.06 - TC 0604625
2 Years non use. In transit provisions apply
50
23.05.17
23 TCOs Revoked - Unused for over 2 years Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
8479.89.90 TRAPS, MAGNETIC, PULP MAKING OR RECONSTITUTING
Op. 15.03.06 Dec. date 02.06.06 - TC 0605330
2 Years non use. In transit provisions apply
50
23.05.17
8479.89.90 CIRCULATORS, OIL, STEAM TURBINE, comprising ALL of the following:
(a) storage tank;
(b) centrifugal pumps;
(c) control valves;
(f) oil filters;
(e) oil cooler
Op. 23.03.06 Dec. date 16.06.06 - TC 0605621
2 Years non use. In transit provisions apply
50
23.05.17
8479.89.90 SETTERS AND CAPPERS, PLUG, AUTOMOTIVE BATTERY, programmable
logic control
Op. 28.03.06 Dec. date 23.06.06 - TC 0605754
2 Years non use. In transit provisions apply
50
23.05.17
8479.89.90 PARTS, CONTINUOUS PAINT LINE, STEEL STRIP, being ANY of the
following:
(a) uncoilers with hold down roll;
(b) recoilers;
(c) accumulator and accumulator columns;
(d) outboard bearings
Op. 07.04.06 Dec. date 30.06.06 - TC 0606252
2 Years non use. In transit provisions apply
50
23.05.17
8479.89.90 CARTS, ROLL, SCISSOR TYPE, CONTINUOUS STEEL STRIP PAINT LINE
Op. 03.05.06 Dec. date 21.07.06 - TC 0607766
2 Years non use. In transit provisions apply
50
23.05.17
8481.80.90 DAMPERS, MOTORISED, PRIME AND/OR FINISH OVEN, CONTINUOUS PAINT
LINE
Op. 21.03.06 Dec. date 02.06.06 - TC 0605340
2 Years non use. In transit provisions apply
50
23.05.17
8481.80.90 VALVES, RECIRCULATION, PICKLE LINE TANK, being ANY of the
following:
(a) pressure gauge isolation ball valves and/or pressure
transmitter isolation ball valves;
(b) acid drain ball valves;
(c) shut-off valves
Op. 24.04.06 Dec. date 14.07.06 - TC 0607299
2 Years non use. In transit provisions apply
50
23.05.17
8481.90.90 BODIES, VALVE, HOT BLAST
Op. 01.05.06 Dec. date 21.07.06 - TC 0607588
2 Years non use. In transit provisions apply
50
23.05.17
8483.60.90 DRIVE SHAFTS, CHARGE ROLLER TABLE, WALKING BEAM FURNACE, having
BOTH of the following:
(a) length NOT less than 600 mm;
(b) diameter NOT less than 220 mm
Op. 06.04.06 Dec. date 30.06.06 - TC 0606251
2 Years non use. In transit provisions apply
50
23.05.17
24 TCOs Revoked - Unused for over 2 years Commonwealth of Australia Gazette
No TC17/25, Wednesday, 07 Jun 2017
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
8484.20.00 SEAL SETS, OIL FILM BEARING, consisting of All of the following:
(a) neck seal with band;
(b) seal end plate;
(c) seal inner ring;
(d) deflector ring;
(e) coolant seal;
(f) screws;
(g) round body ring;
(h) bumper
Op. 10.03.06 Dec. date 26.05.06 - TC 0605044
2 Years non use. In transit provisions apply
50
23.05.17
8705.90.00 CONVEYORS, MATERIAL, VEHICLE MOUNTED
Op. 13.04.06 Dec. date 30.06.06 - TC 0606993
2 Years non use. In transit provisions apply
50
23.05.17