G

UCTT

MAKING

COMMUNICATIONS

BETTER

•

•

•

•

POWERFUL NEXT GENERATION BASE STATION TESTER

Sage Instruments240 Airport BoulevardFreedom CA 95019-2614

PHONE 831.761.1000FAX 831.761.1008WEB www.sageinst.com

SPECTRUM ANALYZER

continued

UCTT Specifications

Rugged Water Resistant per MIL-STD-810Super Bright 10.4" SVGA with Touch ScreenLoaded 5.4 kg/12 lb

Next Generation Test Solution for 3G and 4G wireless networks

Most versatile one-box test solution for BTS, RN, or Node B

Most durable, withstands harsh environments per MIL-STD-810

Measurement performance rivals laboratory instruments

• Range: 698 MHz to 2.7 GHz • Trace Update Time: Min 50 ms, Max 150 ms • Frequency Span: 10 KHz to 600 MHz • Resolution Bandwidth: 100 Hz to 5 MHz • Sweep Trigger: Free run, Single, External • Sample Averaging: 1 to 100 • Windowing: Uniform, Kaiser, Hanning, Hamming, Gaus • Reference Level Range: -100 dBm to +60 dBm (Ref Level = 0 dB) • Measurement Range: -144 dBm to + 30 dBm • Input Attenuation: 0 to 55 dB automatically selected • Preamp: +20 dB (Manual) • Absolute Amplitude Accuracy: +/- 1 dB • DANL – 143 dBm 698 to 1 GHz• DANL – 143 dBm 1.1 to 2.2 GHz• DANL – 141 dBm 2.2 to 2.7 GHz

• Simultaneous Dynamic Range: 90 dB • SSB Phase Noise: -90 dBc/Hz max at 30 kHz offset • Spurious Responses: Residual (input terminated in 50 ohms): < -130 dBmSignal Related (2-tones, -26 dBm, 100 kHz spacing (Preamp OFF): > 70 dBc • Displayed Average Noise Level: -144 dBm (DANL in 100 Hz RBW, preamp on) • RF Input VSWR: 1.8:1 typical • Display Range: -200 dBm to + 60 dBm 1 to 15 dB/div in 1 dB steps. Ten divisions displayed

GSM

Wi MaxLTELTE

2G 3G 4GG GG

EDGEEDGE

CDMACDMA EVDO

WCDMA

HSDPA

CDMA2000

CABLE AND ANTENNA ANALYZER• Frequency Range: 698 MHz to 2.7 GHz • Frequency Resolution: 125 kHz • Data Points: 1024 • Interference Immunity: On-Channel: +20 dBm On-Frequency: 0 dBm (RF Out) +30 dBc RF in • Insertion Loss: Range: > 100 dB Accuracy: +/- 1 dB • Distance-to-Fault: Range: 200 M Data Points: 1024 Accuracy:Typical +/- 15 cm Measurement Speed: 200 ms • Return Loss: Range: 0 to 100 dB Resolution: 0.01 dB • VSWR: Range: 1 to 3.5 Resolution: 0.01 dB

POWER METER • Frequency Range: 698 MHz to 2.7 GHz • Display Range: -80 dBm to +80 dBm • Measurement Range: -60 dBm to +30 dBm Offset Range: 0 to +60 dB • Accuracy: +/- 1 dB • VSWR: < 1.8:1 typical • Maximum Power: +30 dBm (1W) without external attenuator

INTERFERENCE ANALYZER • Strength of the Interferer: Locate the Interferer • RSSI: Collect data up to 100 hours • Spectrogram: Collect data upto 100 hours

CHANNEL SCANNER/ADJACENT CHANNEL POWER • Frequency Range: 698 MHz to 2.7 GHz • Measurement Range: +30 dBm to -144 dBm • Channel Power Accuracy: ±1.0 dB • Adjacent Channel Power Accuracy: ±0.50 dBc • Occupied Bandwidth Accuracy: ±100 kHz

GSM/GPRS/EDGE RF MEASUREMENTS GSMK Modulation Quality • RMS Phase Measurement Accuracy: ±1 deg • Peak Phase Measurement Accuracy: ±1 deg • Residual Error (GSMK): 1 deg • Frequency Offset Accuracy: ±1 Hz • TSC: 0-7 • SBC: 0-2 • Burst Type Capture: Frequency Correction, Dummy, Normal, Synchronization, Access 8PSK Modulation Quality

• (EVM) Measurement Accuracy: ±1.5% • Residual Error (8PSK): 2.5% • Frequency Offset Accuracy: ±1 Hz GSM/EDGE MODULATION ANALYZER • IQ Diagram • Burst Type Decode • Frame Number Decode • BSIC Number Decode

GSM/EDGE BURST ANALYZER TimeSlot Mask per 3GPP-TS-05.05

GSM/EDGE RF MASK ANALYZER Support for all Mask Templates per Annex B • Reference Power Level: -90 dBm to +58 dBm

GSM ABIS MONITOR • Codec Type: GSM, AMR, ACELP • TRAU FRAME Decode • LAPD Decode

WCDMA/HSDPA RF MEASUREMENTS • Frequency Ranges: 698 MHz to 2.7 GHz • RF Channel Power: ±0.5 dB typical • Occupied Bandwidth Accuracy: ±100 kHz

POWERFUL NEXT GENERATION BASE STATION TESTER

UCTT

Sage Instruments240 Airport BoulevardFreedom CA 95019-2614

PHONE 831.761.1000FAX 831.761.1008WEB www.sageinst.com

POWERFUL NEXT GENERATION BASE STATION TESTER

UCTT• Residual Adjacent Channel • Leakage Ratio (ACLR) -55 dB typical at 5 MHz offset -60 dB typical at 10 MHz offset • Leakage Ratio (ACLR): -55 dB typical at 5 MHz offset -60 dB typical at 10 MHz offset • ACLR Accuracy (Single Channel Active): -45 dB at 5 MHz offset ±0.5 dB for ACLR -50 dB at 10 MHz offset • Frequency Error: ±1 Hz + Time Base Error

WCDMA DEMODULATION AND WCDMA/HSDPA

Demodulator • EVM Accuracy: (3GPP Test Model 4) ±2.5%; EVM 25% (3GPP Test Model 5) ±2.5%; EVM 20% • EVM Accuracy2: ±2.5% for 6 EVM 20% • Residual EVM: 2.5% typical • Code Domain Power: ±0.5 dB for code channel power >-25 dB 16, 32, 64 DCPH (test model 1) 16, 32 DCPH (test model 2, 3) • CPICH (dBm) Accuracy: ±0.5 dB typical • Scrambling Code: 3 seconds

T1/E1 Analyzer, Fractional T1/E1 and Sub-channels • Line Coding: AMI, B8ZS • Framing Modes: D4 (Superframe), ESF (Extended Superframe) • Connection Configurations: Terminate (100 Ω) Bridge (100K Ω) Monitor (100 Ω) Drop&Insert (100 Ω) • Receiver Sensitivity: Terminate +6 dB to -36 dB Bridge +6 dB to -36 dB Monitor 20 dB flat gain Drop&Insert +6 dB to -36 dB

• Transmit Level: 0 dB, -7.5 dB, and -15 dB • Clock Sources: External Bits clock • Internal: 1.544 Mb/s ±5 ppm / 2.048 Mb/s / ±5 ppm• Pulse Shapes: Conform to ANSI T1.403 and ITU G.703• Pattern Generation and Detection: • PRBS: 2-9, 2-11, 2-15, 2-20, 2-23 Inverted and non-inverted QRSS, 1-in-8 (1-in-7), 2-in-8, 3-in-24, All ones, All zeros, T1-Daly, User defined (128 bits) • Circuit Status Reports: Carrier present, Frame ID and Sync., Pattern ID and Sync. • Alarm Detection: AIS, RAI • Error Detection: Frame Bits, Bit, BER, BPV, CRC, Error Sec • Error Insertion: Bit, BPV, Framing Bits, RAI, AIS • Loopback Modes: Self loop, CSU, NIU, User defined, In-band or Data Link • Level Measurements: Vp-p (±5%), can also display in dBdsx • Data Log: Continuous, up to 48 hrs • T1 Frequency Measurement: ±5 ppm • DS0 Channel Access Testing: Tone Generator Frequency: 100 Hz to 3000 Hz • Level: -30 to 0 dBm, with 1 dB steps • VF Measurement: Frequency: 100 Hz to 3000 Hz, ±1 Hz Level: -40.0 to +3.0 dBm, ±0.2 dBm • Audio Monitor: Manually select channel 1 to 24 • ITU G.826 Analysis & G.821 Error Reporting: Errored seconds, error free seconds, severely errored seconds, unavailable seconds, available seconds, degraded minutes

MAKING

COMMUNICATIONS

BETTER

MAKING

COMMUNICATIONS

BETTER

Sage Instruments240 Airport BoulevardFreedom CA 95019-2614

PHONE 831.786.3387FAX 831.761.1008WEB www.sageinst.com

POWERFUL NEXT GENERATION BASE STATION TESTER

UCTTPOWERFUL NEXT GENERATION BASE STATION TESTER

ETHERNET ANALYZER• Physical Layer 10/100/1000 Base T• RFC 2544 Testing (Throughput, Latency & Packet Loss Rate) Cable Testing (TDR)

ARBITRARY RF SIGNAL GENERATOR• Frequency Range: 698 MHz to 2.7 GHz• Power Output: 0 dBm, ± 5%• Phase Noise: 85 dBc• Waveforms: AMPS, TDMA, GSM, CDMA, WDCMA

GENERAL SPECIFICATIONS

• Uplink/Downlink Channel Plans: AMPS, 850CDMA, 1900CDMA, GSM850, GSM900, GSM1800, GSM1900, UMTS1700, UMT2100• Maximum Continuous Input: +30 dBm• Maximum Continuous Input without Damage: +33 dBm• Turning Resolution: 1 Hz• Frequency Accuracy: Internal Time Base Accuracy: ±0.1 ppm after warm up Internal Time Base Aging: ±0.1 ppm/year GPS Lock: +/- 12.5 ppb (25° C)• Frequency and Time Reference: Internal: Ovenized Crystal Reference, GPS derived 1 pps External: One Pulse Per Second, Even Second Clock Multiples of 1 MHz to 20 MHz Multiples of 1.2288 MHz to 19.6608 MHz 2.048 MHz

• Interfaces: RF Out Port: Type-N F (50Ω) RF In Port: Type-N F (50Ω) Ext Ref/Trig: BNC Even Sec: BNC GPS Antenna: SMB Dual E1/T1: RJ-45 Dual 10/100/1000: RJ-45 10/100 Base T Ethernet: RJ-45 Ext DC Input: MIL-57D Circular SVGA: MIL-STD Circular (Acc) Audio: MIL-STD Circular (Acc) USB Slave: Type-A USB Host: Type-B

• Environmental: MIL-STD-810-F Operating: -10-C to 55-C, humidity 85% Storage: -51-C to 71° C Altitude: 5000 • Safety: EN 61010-1, portable equipment• Electromagnetic Compatibility: CE• Size: 300 x 216 x 114 mm (13.0 x 8.5 x 4.5 in.)• Weight: 5.4 kg/12.0 lbs (loaded – one bat.) 6.1 kg/13.5 lbs (loaded – two bat.)