Fx1N series Fx1N-22MRT - ChinaPlcCenter Store-LOLLETTE Brand · Positioning command: ABS, ZRN, PLSV, DRVI, DRVA. Clock operation: TCMP, TZCP, TADD, TSUB, TRD, TWR, HOUR. Supports

JingBiao Automation Co., Ltd.

Email : [email protected] Yahoo IM : arcozhang Skype : arcozhang.cn

Fx1N series Fx1N-22MRT

This product uses military-grade KB material PCB board.

32-bit chips, all support 32-bit instructions.

We have imported placement machine, the board 95% are patch,more stable than plug-in manual welding.

12 channel X isolated input port

X0 ~ X5 can do high-speed counter, frequency default is 12K. Can be accessed by the encoder. Specific

applications please refer to the manual Mitsubishi FX1N

8 channels Y isolated outputs, 2 channel transistor outputs

a.relay output using HF46F-24-HS1, the maximum load is: 250V5A.

b.Y0, Y1 transistor output mainly high pulse output (PLSY, PWM, PLSR, PLSV, DRVI, DRVA high pulse

command output port,Default 12K,transistor output use Darlington TIP122 power transistors,Per channel

inhalation instantaneous current,4A,normal operation is 2A.

Support 232 and RS485 communication (optional), you can connect the computer, text or touch screen

PC.

need one channel 24V supply voltage (many similar products require two independent power supply)

Super Encryption: Just after the keyword is equal to 12345678, the ladder diagram of the board inside will

not be able to read and crack.



Figure 1

Figure 2



Figure 3



Figure 4

Figure 5

Figure 6



Figure 7



Board Supports instruction

Special device:

M8000(Operation monitoring contacts)，M8001(operation monitoring Anti-contacts).

M8002(Initialization pulse contact),M8003(initialize pulse anti -contact).

M8004(Wrong indication contacts).

M8011(10 millisecond clock pulses), M8012 (100 millisecond clock pulses), M8013 (1-second clock pulse),

M8014 (1 minute clock pulse).

M8020 (zero position mark), M8021 (borrow flag will), M8022 (carry flag).

M8029 (instruction execution completion flag).

M8033 (memory keep contacts).

M8034 (disable output contacts).

More reference FX1N series.

II: The product currently supports command set

Basic instructions: LD, LDI, AND, ANI, OR, ORI, OUT, (OUTT, OUTC), SET, RST, ANB, ORB, MPS, MRD,

MPP, INV, LDP, LDF, ANDP, ANDF, ORP, ORF, RET, OUTM, SETM, RSTM, OUTS, SETS,

RSTS, PLS, PLF, MC, MCR, PI, END.

Step instructions: STL: support up to eightchannel parallel branches, different state numbers can have a double

coil.

Contact comparison instructions: LD> =, LD <=, LD>, LD <, LD <>, LD =, AND> =, AND <=, AND>, AND <, AND



<>, AND =, OR> =, OR <=, OR>, OR <, OR <>, OR =.

Transmission and comparison instructions: MOV, CML, XCH, BCD, BIN, CMP, ZCP, FMOV.SMOV.BMOV.

Four arithmetic instructions: ADD, SUB, MUL, DIV, INC, DEC, WAND, WOR, WXOR, NEG.

Rotate Instructions: SFTR, SFTL, SFWR, SFRD.

Data processing instructions: ZRST, DECO, ENCO.

Program flow instructions: CJ, CALL, SRET, IRET, EI, DI, FEND, WDT, FOR, NEXT.

Easy instructions: IST, ABSD, INCD, ALT, RAMP,

High speed processing instructions: REF, REFF, MTR, HSCS, HSCR, SPD, PLSY, PWM, PLSR (two pulse

outputs, Y0, Y1 mouth).

Peripheral I / O ports: DSW, SEGL, FROM, TO.

Peripherals SER instruction: RS, PRUN, ASCI, HEX, CCD, VRRD, VRSC, PID.

Positioning command: ABS, ZRN, PLSV, DRVI, DRVA.

Clock operation: TCMP, TZCP, TADD, TSUB, TRD, TWR, HOUR.

Supports 32-bit instructions.



Fx1N-22MRT Wiring diagrams and dimension drawing

Documents

Fx1N series Fx1N-22MRT - ChinaPlcCenter Store-LOLLETTE Brand · Positioning command: ABS, ZRN, PLSV, DRVI, DRVA. Clock operation: TCMP, TZCP, TADD, TSUB, TRD, TWR, HOUR. Supports