6
Platform Highlights • Robust, handheld design for field environments • High resoluon, 5” TFT color touch-screen for easy viewing • Intuive display, simple funcon keys and touch-screen for fast navigaon and easy operaon • Internal data storage with expandable SD card • Micro-USB OTG interface for flash drives, fiber inspecon probe connecon and test data transfer • Rechargeable Lithium Polymer baery with capacity indicator, low voltage alarm and Auto-off funcon • > 9 hours connuous operaon without recharging baeries • Built-in WiFi opon to perform soſtware upgrades • Built-in Bluetooth opon for pairing Mobile devices Key Features • Table View, Spectrum View and Channel Driſt Analysis • Precise Wavelength, Signal Level and OSNR required to confirm DWDM network service quality • Built-in wavelength reference • Sweep me < 5 seconds • Simultaneous measurements of up to 96 channels @ 50 GHz • DWDM channel spacing down to 50 GHz • Generate and save test results in HTML file format • Single or Connuous Repeat Sweep • High wavelength accuracy: ± 50 pm • Dynamic Measurement range: ≥ 65 dB • *OSNR measurement range: 10-25 dB • **Special noise filter (iOSNR) for improved noise measurement • Low Polarizaon Dependent Loss (PDL): < 0.3 dB • DWDM Opcal Rejecon Rao: > 40 dB @ 200 GHz • Oponal universal interface with interchangeable adaptors • OSNR measurements per IEC 61280-2-9 • CWDM channel measurements per ITU-T G.694.1 grid • DWDM C-Band channel measurements per ITU-T G.694.1 grid *OSNR values depend on source level, modulaon and channel spacing. **Applying noise filter can improve OSNR results up to 3-5 dB @ 100 GHz and up to 10-15 dB @ 50 GHz Micro Optical Spectrum Analyzer for CWDM or DWDM Fiber Network Testing Available in two test configuraons, CWDM or DWDM C-band, the FX180 measures key parameters such as wavelength, channel power, driſt and OSNR. This compact, robust, lightweight tester supports Spectrum view and an optional Fiber Scope for checking connectors. FX180 micro OSA

FX180 micro OSA - Heynen

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Platform Highlights

• Robust,handhelddesignforfieldenvironments• Highresolution,5”TFTcolortouch-screenforeasyviewing• Intuitivedisplay,simplefunctionkeysandtouch-screenforfast

navigationandeasyoperation• InternaldatastoragewithexpandableSDcard• Micro-USBOTGinterfaceforflashdrives,fiberinspectionprobe

connectionandtestdatatransfer• RechargeableLithiumPolymerbatterywithcapacityindicator,

lowvoltagealarmandAuto-offfunction• >9hourscontinuousoperationwithoutrechargingbatteries• Built-inWiFioptiontoperformsoftwareupgrades• Built-inBluetoothoptionforpairingMobiledevices

Key Features

• TableView,SpectrumViewandChannelDriftAnalysis• PreciseWavelength,SignalLevelandOSNRrequiredtoconfirm

DWDMnetworkservicequality• Built-inwavelengthreference• Sweeptime<5seconds• Simultaneousmeasurementsofupto96channels@50GHz• DWDMchannelspacingdownto50GHz• GenerateandsavetestresultsinHTMLfileformat• SingleorContinuousRepeatSweep• Highwavelengthaccuracy:±50pm• DynamicMeasurementrange:≥65dB• *OSNRmeasurementrange:10-25dB• **Specialnoisefilter(iOSNR)forimprovednoisemeasurement• LowPolarizationDependentLoss(PDL):<0.3dB• DWDMOpticalRejectionRatio:>40dB@200GHz• Optionaluniversalinterfacewithinterchangeableadaptors• OSNRmeasurementsperIEC61280-2-9• CWDMchannelmeasurementsperITU-TG.694.1grid• DWDMC-BandchannelmeasurementsperITU-TG.694.1grid

*OSNR values depend on source level, modulation and channel spacing.**Applying noise filter can improve OSNR results up to 3-5 dB @ 100 GHz and up to 10-15 dB @ 50 GHz

Micro Optical Spectrum Analyzer for CWDM orDWDM Fiber Network TestingAvailableintwotestconfigurations,CWDMorDWDMC-band, the FX180measures key parameters suchaswavelength, channelpower, driftandOSNR. Thiscompact,robust,lightweighttestersupportsSpectrumview and an optional Fiber Scope for checkingconnectors.

FX180 micro OSA

2FX180 micro OSA

Testing CWDM NetworksTest parameters in a CWDM network are normally lessstringentcomparedtoDWDMsystems–dueinparttomorelenientlaserwavelengthtolerancesandwidepass-bandfiltersbeingused.SincetherearenoactivecomponentslikeErbiumDopedFibreAmplifiers (EDFA) to createnoise in aCWDMnetwork,usinga complexandexpensiveOSAwouldbeanoverkill and inappropriate forfield testing. ThemicroOSAquicklydetermines thepresence/absenceofeachof the16wavelengthsandcheckstheirpowerlevelsaccurately.Thankstoexcellentsensitivityandalargepowerinputrangeof65dBdynamicrange,themicroOSAcanbeconnectedtoa20dBmonitoringtapontheOADM,makingitidealfornon-intrusivechannelanalysis.SophisticatedMEMStuningtechnologyhasnomovingpartsprovidingaruggedtoolthatallowstheunittomakefastermeasurementsenablingquicktroubleshootingofaCWDMnetwork.

APPLICATIONSApplications

TheFX180microOSAisaruggedized,handheld,easy-to-usemeasurement tool for CWDMandDWDMfibernetworks.Withinlessthan5secondsofconnectingtothenetwork,thetestsetwillsimultaneouslydisplayallchannelsinhistogram,verticalbarsortabularformat.

CWDM Technology CoarseWavelengthMultiplexing (CWDM) technology isusedfrequentlyinenterpriseormetronetworkstoincreasebandwidthcapacityeconomically.CWDMtransmissionsystemscantransportupto16channels(wavelengths)inthe1271nmto1611nmspectrumwitha20nmchannelspacing.Thewidthofeachchannelis13nmwiththeremaining7nmdesignedtobetheguardbandtoseparatefromthenextchannel.Duetothe20nmchannelspacing,cost-effectiveun-cooledlaserscanbeused.

CWDMtechnologyisoftenusedtotransportdifferenttypesofservices,e.g.Ethernet,SDH/SONET,andFibreChannel(FC)butithaslimitationsinthedistanceoverwhichthetrafficistransportedandalsointhetotalchannelcount.

DWDM TechnologyDWDM technology is particularly suitable for long-haultransmissionsystemsbecauseitssupportsErbiumDopedFiberAmplification (EDFA). The ITU-TG.694.1 recommendationdefinesthewavelengthsfoundintheC-band(1527-1567nm)andL-band(1565-1620nm)withchannelspacingat50GHz(0.4nm),100GHz(0.8nm)or200GHz(1.6nm).Denselypackedchannelsaren’twithouttheirlimitationsespeciallyasprecisionlasersmustkeepchannelsexactlyontarget.

Testing DWDM Networks Boasting impressive specifications, themicroOSAprovideperformancesuitableforlabsbutisruggedenoughforharshfieldenvironments.Anathermaldesignassurescalibration isvalidoveralltemperaturerangesresultinginaccuratepowerandwavelengthmeasurementinadverseorcontrolledconditions.ThemicroOSAsupports FullbandorC-bandmeasurementswithsuperiorwavelengthandchannelresolution.Theunitisanindispensabletoolforcheckingcriticalparametersresponsiblefortransmissionfaults.

Critical DWDM Parameters • Channelwavelengthorfrequencystability• Channelwavelengthandfrequencydriftdeltavs.ITUgrid• Levelisstableorabovethreshold• OpticalSignal-to-NoiseRatio(OSNR)belowlimits• Excessivenoiselevelperchannelbandwidth

3FX180 micro OSA

TheRepeatSweepallows theuser todrilldownspecificallyinto a single channel view tomonitor continuous channelperformanceincludingsignallevel,laserdriftandOSNR.Theusercanmovethecursortogobackintimetoreverifysignalanomaliesthatrecentlyoccurred.

Select any channel in thehistogramview toget adetailedchanneltestviewincluding:signallevel,wavelengthfrequency,driftfromITU-channel,OSNR,3dBand20dBbandwidths.

FEATURESFeaturesFast Startup The FX180microOSApowers up and is ready toperformmeasurementsinlessthan60seconds,makingitoneofthefastestunitsintheindustry.Technicianscanstarttoworkalmostimmediatelytocheckthenetworkanddeterminetheeffectsofprovisioningnewservicesontheexistingnetwork.

Fast Scan ThemicroOSAhasascansweeptime<5seconds.Usersmaychooseasinglesweeptestoracontinuousrepeatsweeptestmodewhichallowsuserstomonitorchangesthatmayoccurovertime.

Histogram ViewTheHistogramviewshowsagraphicalrepresentationofallin-Servicechannelsononescreen.ThisDisplaymodeallowstheusertoeasilycomparesignallevelsofallchannels.Itcanalsobeusedtoviewiftheadd/dropchannelimpactsoverallsystemsignallevels.Goodchannelsaredisplayedasagreenbar.Anychannelthatisbelowthethresholdwillbered.

Channel Table ViewViewallchannelssimultaneouslyintabularformat.UserdefinedAlarmthresholdsareusedtohighlightissuesinred.

HTML Test Report Save test resultsusingautoor customfilename inHTMLfileformat.

Simple Software UpgradesFirmwareupgrades areperformedeasily via themicroUSBportconnectedviaanOTGtoaUSBmemorystick.Updatesareavailableatnochargeforregisteredusers.

Extended Battery OperationThemicroOSAprovidesover9hoursofoperationonasinglecharge.Alowvoltageindicatorwarnstheuserwhenthedevicepowerreachescriticallevels.

4FX180 micro OSA

Fiberscope Option

An optional Fibermicroscope can be used to assess thecleanlinessoftheopticalconnector’ssurfaceandisperfectlysuitedforbulkheadadapterormaleconnectorinspection.Theprobeconnectsdirectlytotheunit’smicro-USBOTGporttoobtainitspowerandtotransferimages.Singlefingerfocusingwithanautomaticimagefocusandcapturefeaturesimplifiesoperation.

Theprobefeaturesinter-changeableheadsandissuppliedwithbulkheadadaptertipsforFC/PC,SC/PC,andLC/PCconnectorstyle,includingmaleconnectoradapters.

Softwareforviewingconnectorend-faceimageswhichhavebeentransferredandsavedonaWindows®PCisavailableasanoption.

OptionalsoftwareautomaticallycapturesthefocusedimageandanalyzestheconnectorconditionandprovidesareportwithPass/FailcriteriaaccordingtotheIEC61300-3-35Sect5.4standard.

Spectrum View

SpectrumViewenhances theversatilityof theunit and is apowerful feature formore advanced signal analysis. Signalpropertiessuchaschanneloverlap, spuriousnoiseand four-wavemixingcanbeanalyzedasmorechannelsareaddedtothenetwork.

IntheSpectrumview,themicroOSAallowstheusertozoominforbetterviewingofthatspecificchannelwhentroubleshooting.

FEATURES

5FX180 micro OSA

SPECIFICATIONS

Parameters Unit CWDM DWDM C Band2

WavelengthRange nm 1260-1650 1527-15672

NumberofChannels # upto20 upto96

ChannelSpacing GHz/nm 20nm 50GHzInputPowerRange dBm -50to+15MaximumInputPower dBm 30

WavelengthResolution(FWHM) nm 3.54 0.18(22.5GHz)

AbsoluteWavelengthAccuracy3 pm ±300 ±50

WavelengthRepeatability3 pm ±100 ±10

AbsoluteChannelPowerAccuracy3,5 dB ±1.0 ±0.5RelativePowerAccuracy3,5 dB ±0.8 ±0.4

PowerMeasurementRepeatability5 dB ±0.1

OSNRRange3 dB N/A 10to25

OSNRAccuracy3 dB N/A ±1.5

PolarizationDependentLoss(PDL) dB <0.5 <0.3

NoiseFloor dBm -65 -55

OpticalRejectionRatio(ORR)-At50GHzoffset-At200GHzoffset

dBN/AN/A

>30>40

WavelengthReadout pm 10 1

OpticalReturnLoss dB >30

SweepTime sec <5

OpticalInterface FixedorUniversalbasewithinterchangeableadapters

Optical Specifications1

Notes:1.Unlessnoted,allspecificationsarevalidat23°C±2°C(73.4°F±3.6°F)usingFC/UPCconnectors.2.Specificationsguaranteedforchannelspacing≥42GHz,OSNR≥10dBandadjacentchannellevelvariation≤6dB.OSNRvalues

dependonsourcelevel,modulationandchannelspacing(i.e.source>0dBmNRZ@100GHzcanshowOSNRapproximately40dB).3.Specificationsguaranteedforinputpowerrangefrom-40to-10dBm.4.TypicalCWDMFWHMis3.2nm.5.DoesnotincludePDL.

VeEX Inc.2827 Lakeview CourtFremont, CA 94538 USATel: +1.510.651.0500Fax: [email protected]

© 2017 VeEX Inc. All rights reserved. VeEX is a registered trademark of VeEX Inc. The information contained in this document is accurate. However, we reserve the right to change any contents at any time without notice. We accept no responsibility for any errors or omissions. In case of discrepancy, the web version takes precedence over any printed literature. D05-00-130P B00 2017/11

The Ver i f icat ion Experts

Ordering Information

General Specifications

Dimensions 150x150x70mmWeight 0.7kgnominalBattery LithiumPolymerbattery,10Ahwithlowvoltage

indicationBatteryAutonomy >9hourscontinuousoperationOperatingTemperature 0˚Cto50˚C(32˚Fto122˚F)StorageTemperature -40˚Cto60˚C(-40˚Fto140˚F)Humidity 5%to80%,non-condensingDisplay 5”highresolutionTFTcolortouchscreenLCDInterfaces Micro-USBwithOnTheGo(OTG)supportACAdaptor Input:100-240VAC(50/60Hz),1.5Amax Output:12VDCMemory Internal8GbytemicroSDcardConnectivity WiFi802.11b/g/n(optional),Bluetooth(optional)Languages English(othersavailableondemand)Certifications CE&ROHScompliantSafetyStandards ACadaptor-IEC61010-1,ClassII(GOST12.2.091)

Handheld Optical Channel Analyzer ModelsDescriptionCWDMmicroOSA(1260to1650nm)DWDMCBandmicroOSA(1527to1567nm)

Additional Options

Bluetooth+WiFiOption

FiberScopeOptionOTGUSBCable

GENERAL