Fusion FH/FHR-145 Remote Pan and Tilt Heads

Vinten Radamec™A Vitec Group brand

Fusion FH/FHR-145 Rem

ote Pan and Tilt Heads

Technical Datasheet

260

mm

(10.

2”)

30 m

m (1

.2”)

90 m

m (3

.5”)

90 m

m (3

.5”)

10.5 mm (0.413”)40 mm (1.575”)

436 mm (17.2”) 195 mm (7.6”)

94.5 mm (3.7”)

490

mm

(19.

3”)

375.

15 m

m (1

4.8”

)

Adju

stab

le 2

49 m

m to

537

mm

(9.

8” to

21.

1”)

319.3 mm (12.6”)

235 mm (9.3”)

1

2

3

4

5

8 6

6

7

9

9

10

11

12

14

13

Technical Datasheet

Key:1. Tilt Lock2. Communication Status 3. Genlock Status4. Fuse Holder 250V AC T3.15A5. Tilt Auto / Manual select (FH-145 only) 6. Drag adjustment (FH-145 only)7. Pan Auto / Manual select (FH-145 only)8. Power Switch9. Mains (inlet and outlet)10. Network11. Aux Port12. Lens control port13. Mitchell Adaptor Slot14. Mounting Holes 4 x 3/8" BSW on

111 mm / 4.375" PCD

Fusion FH/FHR-145 Rem

ote Pan and Tilt Heads

Technical Datasheet

Technical Specification

FH-145 FHR-145

Part number V4101-0001 V4102-0001

Dimensions H: 490 mm L: 436 mm W: 260 mm / H: 19.3 in L: 17.2 in W: 10.2 in

including cradle - W: 260 mm / 10.2 in

Weight 28.4 kg / 62.6 lbs 24.3 kg / 53.5 lbs

Pan range 720º

Tilt range ±90º

Payload 65 kg / 145 lbs

Rated load inertia 7.5 kgm2 / 178 lb f2

Speed 0.01 to 60º / sec

Max. acceleration 120º / sec2

Accuracy 60 arc sec

Positional Resolution 22-bit, 4.194mil counts per 360º

Temp range

Operating 5-50ºC, 90% humidity non condensing

Storage -40 to +60ºC

Compatible controllers Vinten Radamec VRC, CP4 and LCS Vinten Radamec VRC, CP4 and LCS

Robotic / Manual mode Yes No (Robotic only)

Changeover Pan and tilt changeover controls n/a

Drag 5 fluid drag settings, plus zero n/a

Tilt axis lock Yes

Cable restraint Small and large brackets supplied

Mounting Vinten 4-bolt and Quickfix mountings

Mitchell mounting (adaptor required)

Power

Rating 100-240V AC Autoranging, 50/60Hz, 175W

Switch Illuminated push button, dimmable

Connectivity Neutrik powerCON TRUE1 inlet and outlet

Lens control Full-servo Canon and Fujinon lenses

Aux port

Serial port 1x RS232 / 422

Power 12V DC, 30W

GPIO 4 DIO lines, individually assignable as input or output

Connectivity Female HDB26 socket

Network IP Ethernet, RJ45

Genlock Black burst / tri-level, BNC

CCU control Option

VR tracking data output Option, Ethernet UDP or Serial RS232 / 422

Vinten RadamecWilliam Vinten Building, Western Way, Bury St EdmundsSuffolk IP33 3TB United Kingdom

T: +44 (0)1284 776700 (UK) T: +1 845 268 0100 (USA)

VRFH-145TeLit14

www.vintenradamec.comVinten Radamec™A Vitec Group brand

Technical specifications are subject to change without notice.Vinten Radamec reserves the right, without notice, to make changesin equipment design or performance as progress in engineering,manufacturing or technology may warrant.