12
See page Statement of Line 5.2 Planning 5.3 Overview 5.3 Product Information 5.4 Filing Capacities 5.5 Locking Information 5.6 Pricing 5.7 Lateral Files 5.7 Overfiles 5.9 Storage Cabinets 5.9 Accessories 5.10 Surface Materials 5.11 Paint 5.11 Price List Effective Dates: Pricing 03.02.20 Revision 02.17.20 Metal Filing FUNDAMENTAL ® Table of Contents Page 5.1 Fundamental Kimball Surfaces & Storage

FUNDAMENTAL Table of Contents Metal Filing · FUNDAMENTAL® Overview O Planning Metal Filing Fundamental Kimball Surfaces & Storage Page 5.3 Drawer Pull Options: Three drawer pulls

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: FUNDAMENTAL Table of Contents Metal Filing · FUNDAMENTAL® Overview O Planning Metal Filing Fundamental Kimball Surfaces & Storage Page 5.3 Drawer Pull Options: Three drawer pulls

➤See page

Statement of Line 5.2

Planning 5.3

Overview 5.3

Product Information 5.4

Filing Capacities 5.5

Locking Information 5.6

Pricing 5.7

Lateral Files 5.7

Overfiles 5.9

Storage Cabinets 5.9

Accessories 5.10

Surface Materials 5.11

Paint 5.11

Price List Effective Dates:Pricing 03.02.20Revision 02.17.20

Metal Filing

FUNDAMENTAL® Table of Contents

Page 5.1 FundamentalKimball Surfaces & Storage

Page 2: FUNDAMENTAL Table of Contents Metal Filing · FUNDAMENTAL® Overview O Planning Metal Filing Fundamental Kimball Surfaces & Storage Page 5.3 Drawer Pull Options: Three drawer pulls

Metal Files and Cabinets Statement of LineIMPORTANT: All dimensions shownbelow are nominal and have beenrounded to the nearest inch. Referthe appropriate pricing pages foractual dimensions.

FundamentalKimball Surfaces & Storage

Page 5.2

2-High Lateral Files➤See page 5.7 to specify.

30"W 36"W 42"W

27"H • • •

3-High Lateral Files➤See page 5.7 to specify.

30"W 36"W 42"W

39"H • • •

4-High Lateral Files➤See page 5.7 to specify.

30"W 36"W 42"W

51"H • • •

5-High Lateral Files Available with five drawers, four drawers and fixed shelf with lift door, ADA-compliant models, or five drawers and posting shelf.➤See page 5.8 to specify.

30"W 36"W 42"W

65"H • • •

Overfiles➤See page 5.9 to specify

30"W 36"W 42"W

29"H • • •

Storage Cabinets➤See page 5.9 to specify.

30"W 36"W 42"W

27"H • • •39"H • • •51"H • • •65"H • • •

Counterweight Kits➤See page 5.10 to specify.

Overfile/Storage Cabinet Shelvesand Wardrobe Kits➤See page 5.10 to specify.

File Bars and Drawer Dividers➤See page 5.10 to specify.

FUNDAMENTAL®

Metal Filing

Page 3: FUNDAMENTAL Table of Contents Metal Filing · FUNDAMENTAL® Overview O Planning Metal Filing Fundamental Kimball Surfaces & Storage Page 5.3 Drawer Pull Options: Three drawer pulls

Overview O PlanningFUNDAMENTAL®

Metal Filing

FundamentalKimball Surfaces & Storage

Page 5.3

Drawer Pull Options:

Three drawer pulls are available onFundamental files.

Extended is recessed along the fullfront edge.

Rail*

Arc*

*Suitable for ADA applications.

Statement of Line ➤See page 5.2

Planning 5.3

Pricing 5.7

Surface Materials 5.11

Top is finished so the file can be usedas a stand alone unit.

Knockouts are standard for gangingside-by-side or for securing to a wall.

Counterweight kit, specified sepa-rately, is required for all individual free-standing units. Kits includecounterweight and bracket, packagedindividually.

Four glides, standard, provide 3⁄4"adjustability and allow for sturdy, four-point loading.

Fixed shelf with lift door on appli-cable five-high lateral files replacestop drawer and accommodatesstanding binders up to 12"H.

Locking is standard. Select key random or key specific.Note: Lock cores must be specifiedseparately for key specific option.

Integrated drawer slide and singleinterlock mechanism are part of theslide design, providing for quieterdrawer operation and ensuring onlyone drawer may be opened at a time.

Built-in anti-rebound catch pre-vents drawer from accidently rollingopen.

Full ball-bearing drawer suspen-sion allows both the drawer and suspension to extend together.

Side-to-side file bars are standard;two per drawer.

Front-to-back file bars are availableseparately for easy field installation.

Label holder is standard with ex-tended pull; one per drawer.

Replacement drawer fronts can befield installed.

Page 4: FUNDAMENTAL Table of Contents Metal Filing · FUNDAMENTAL® Overview O Planning Metal Filing Fundamental Kimball Surfaces & Storage Page 5.3 Drawer Pull Options: Three drawer pulls

Details

Lateral file construction featurescoach seam welds. Right angle bendof the coach seam makes thestrongest use of formed metal andpresents a clean exterior with no exposed welds.

Progressive slide suspension pro-vides smooth drawer operation.

Steel drawer interiors are pre-painted cinder.

ADA compliant lateral files featurethe choice of rail or arc pull. The lockis placed at 385⁄8"H (above the thirddrawer), making it accessible from aseated position.

Posting shelf, available on five-highlateral file, includes magnetic springlatch to open and close. Posting shelfis located above the third drawer andis 13⁄8"H.

Drawer fronts and lift doors in thetop position on five-high lateralfiles are 19⁄16" taller than the otherdrawer fronts to accommodate the re-ceding lift-door application.Exception: Drawer fronts on modelswith posting shelf are all the sameheight. Posting shelf is 13⁄8"H.

Letter, legal and A4 filing is accom-modated with conventional or hangingfolders.➤See page 5.5 for filing capacities.

Side-to-side legal or letter filingcan be accommodated with file barsthat ship standard in file.

Front-to-back filing can be accom-modated by ordering the appropriatenumber of front-to-back file bars separately.

Overfiles and storage cabinetsfeature hinged doors.

IMPORTANT: Shelves and wardrobekits are specified separately for fieldinstallation. Shelves are adjustable at2" increments.

Four adjustable glides are stan-dard, providing 1" adjustability.

Connections

Knockouts are standard in all filesand cabinets for ganging side-by-side.

Overfile can be used independentlyor in addition to any appropriate widthFundamental file or storage cabinet.

Related Products

Counterweight kit, specified sepa-rately, is required for all individual free-standing units.➤See page 5.10.

Laminate file tops for use Fundamental and LF Series areavailable to provide a continuousworksurface over one or more files.➤See the laminate file tops page inthe Footprint Worksurfaces & Supportchapter in the Kimball Surfaces &Storage Price List.

Paper management accessoriesare available.➤See page 5.10.

Product Information P PlanningFUNDAMENTAL®

Metal Filing

Statement of Line ➤See page 5.2

Planning 5.3

Pricing 5.7

Surface Materials 5.11

FundamentalKimball Surfaces & Storage

Page 5.4

Page 5: FUNDAMENTAL Table of Contents Metal Filing · FUNDAMENTAL® Overview O Planning Metal Filing Fundamental Kimball Surfaces & Storage Page 5.3 Drawer Pull Options: Three drawer pulls

Filing Hardware:Heavier lines in the illustrations atright indicate filing hardware.

Front-to-back file bars can be specified separately.➤See the Perks chapter in the Kimball Desks & Accessories Price List.

Side-to-side file bar is standard; one per drawer.

Drawer divider can be specifiedseparately.➤See page 5.10.

Inside InsideDescription Depth Width Height Filing Arrangements

18"D x 30"W lateral 147⁄8" 267⁄8" 93⁄8"

295⁄8" letter 251⁄4" legal 2613⁄16" letter 2613⁄16" legal Front-to-back file bars (2) Front-to-back file bar (1) Side-to-side file bars (2) Side-to-side file bars (2) Side-to-side file bars (2) Side-to-side file bars (2)

18"D x 36"W lateral 147⁄8" 327⁄8" 93⁄8"

295⁄8" letter 295⁄8" legal 3213⁄16" letter 3213⁄16" legal Front-to-back file bars (2) Front-to-back file bars (2) Side-to-side file bars (2) Side-to-side file bars (2) Side-to-side file bars (2) Side-to-side file bars (2)

18"D x 42"W lateral 147⁄8" 387⁄8" 93⁄8"

447⁄16" letter 355⁄8" legal 3813⁄16" letter 3813⁄16" legal Front-to-back file bar (2) Front-to-back file bars (2) Side-to-side file bars (2) Side-to-side file bars (2) Side-to-side file bars (2) Side-to-side file bars (2)

Filing Capacities PlanningFUNDAMENTAL®

Metal Filing

Statement of Line ➤See page 5.2

Planning 5.3

Pricing 5.7

Surface Materials 5.11

FundamentalKimball Surfaces & Storage

Page 5.5

Page 6: FUNDAMENTAL Table of Contents Metal Filing · FUNDAMENTAL® Overview O Planning Metal Filing Fundamental Kimball Surfaces & Storage Page 5.3 Drawer Pull Options: Three drawer pulls

Fundamental

FUNDAMENTAL®

Metal Filing

FundamentalKimball Surfaces & Storage

Page 5.6

Locking Information

Model/Key Range Price

Black Lock Core withBlack Hinged Key KSCD001 to KSCD300 $ 27

Change Key KCCB1CK $ 9

Master Key KC2GMK $ 15

How to Specify! Specify exact key number for

lock cores as the model numberor model number for change ormaster key

Locking units can be specified as:• Key random with a black lock core

and black hinged key (KRB); or• Key specific (KS)

Black lock cores with black hingedkeys are identical to the ones usedwith other casegoods and systemsproducts.

Key Random Option:When key random option is selected,key numbers will be assigned arbitrar-ily at the factory with key numbersranging from KSCD001 to KSCD300.

Randomly numbered lock core(s) willship standard along with your orderfor field installation.

With random keying, different furnitureunits may or may not have the samekey number. If you must have all lockskeyed differently or all locks keyed thesame, choose the key specific option.

Key Specific Option:When key specific option is selected,the storage unit will be pre-drilled toaccept a lock core; however, no lockcores will be shipped standard withthe unit. If lock cores are standard onthe unit, the price of the unit is re-duced by the price of the lock core orcores.

You must specify lock core(s) sepa-rately for key specific option; specifyany key number from KSCD001 toKSCD300.

To key all the furniture units in a work -station or department alike, choosethe key specific option and order thequantity of locks needed for your in-stallation.

Standard key that ships with the lockcore can be used for the initial installa-tion of the lock core in the field.

Change key model KCCB1CK al-lows removal of lock cores for keynumbers ranging from KSCD001 toKSCD300.

IMPORTANT: A change key, specifiedseparately, is required to remove lockcores in the field.

Master key model KC2GMK will un-lock any lock with key numbers rang-ing from KSCD001 to KSCD300.KSCD001 KSCD101 KSCD025

KSCD001 KSCD223

KSCD001 KSCD198

KSCD005

KSCD005

KSCD005

Statement of Line ➤See page 5.2

Planning 5.3

Pricing 5.7

Surface Materials 5.11

Planning

Page 7: FUNDAMENTAL Table of Contents Metal Filing · FUNDAMENTAL® Overview O Planning Metal Filing Fundamental Kimball Surfaces & Storage Page 5.3 Drawer Pull Options: Three drawer pulls

Standard Includes

• 2, 3, or 4 drawers • Lock: black• Two side-to-side file bar per drawer• Floor glides; adjustable to 3⁄4"

How to Specify! Model2 Pull option: R = Rail, textured black E = Extended, same paint as file ARC462 = Arc, Cinder ARC485 = Arc, Dark Chocolate ARC501 = Arc, Platinum Metallic ARC503 = Arc, Satin Nickel ARC505 = Arc, Bronze Metallic ARC514 = Arc, Carbon Metallic3 Lock option: KRB = Key random KSB = Key specific (-$ 27 ;

specify lock core separately)4 Finish price group: STD = Group 1

STDM = Group M (+10%)5 Finish designator

D W H Model Price

2-High Lateral Files 18" 30" 271⁄4" FND18302 $ 1015

36" FND18362 1104

42" FND18422 1190

3-High Lateral Files 18" 30" 393⁄16" FND18303 $ 1188

36" FND18363 1349

42" FND18423 1464

4-High Lateral Files 18" 30" 511⁄8" FND18304 $ 1441

36" FND18364 1623

42" FND18424 1831

FundamentalKimball Surfaces & Storage

Page 5.7

2-, 3-, and 4-High Lateral Files T PricingFUNDAMENTAL®

Metal Filing

Statement of Line ➤See page 5.2

Planning 5.3

Pricing 5.7

Surface Materials 5.11

IMPORTANT: Counterweight kit,specified separately, is required forall freestanding lateral files.➤See page 5.10.

Front-to-Back File Bars➤See the Perks chapter in the Kimball Desks & Accessories Price List.

Laminate File Tops➤See Footprint Worksurfaces & Support chapter in the Kimball Surfaces & Storage Price List.

GSA SIN 711-3

Page 8: FUNDAMENTAL Table of Contents Metal Filing · FUNDAMENTAL® Overview O Planning Metal Filing Fundamental Kimball Surfaces & Storage Page 5.3 Drawer Pull Options: Three drawer pulls

D W H Model Price

5-High Lateral Files 18" 30" 641⁄2" FND18305 $ 1931

36" FND18365 2114

42" FND18425 2312

5-High Lateral Files with Fixed Shelf and Lift Door 18" 30" 641⁄2" FND18305LD $ 2018

36" FND18365LD 2200

42" FND18425LD 2395

5-High Lateral Files, ADA Compliant 18" 30" 641⁄2" FND18305ADA $ 2114

36" FND18365ADA 2293

42" FND18425ADA 2493

5-High Lateral Files with Posting Shelf 18" 30" 641⁄2" FND18305PS $ 2120

36" FND18365PS 2304

42" FND18425PS 2503

5-High Lateral Files F PricingFUNDAMENTAL®

Metal Filing

FundamentalKimball Surfaces & Storage

Page 5.8

Standard Includes

• Five lateral file drawers (four draw-ers and fixed shelf and lift door onapplicable models)

• Lock: black• Two side-to-side file bar per drawer• Floor glides; adjustable to 3⁄4"

How to Specify! Model2 Pull option: R = Rail, textured black E = Extended, same paint as file

(not available on ADA Compliantmodels)

ARC462 = Arc, Cinder ARC485 = Arc, Dark Chocolate ARC501 = Arc, Platinum Metallic ARC503 = Arc, Satin Nickel ARC505 = Arc, Bronze Metallic ARC514 = Arc, Carbon Metallic3 Lock option: KRB = Key random KSB = Key specific (-$ 27 );

specify lock core separately4 Finish price group: STD = Group 1

STDM = Group M (+10%)5 Finish designator

Statement of Line ➤See page 5.2

Planning 5.3

Pricing 5.7

Surface Materials 5.11

IMPORTANT: Counterweight kit,specified separately, is required forall freestanding lateral files.➤See page 5.10.

Front-to-Back File Bars➤See the Perks chapter in the Kimball Desks & Accessories Price List.

GSA SIN 711-3

Page 9: FUNDAMENTAL Table of Contents Metal Filing · FUNDAMENTAL® Overview O Planning Metal Filing Fundamental Kimball Surfaces & Storage Page 5.3 Drawer Pull Options: Three drawer pulls

D W H Model Price

Overfiles 18" 30" 291⁄4" FND1830OF $ 902

36" FND1836OF 945

42" FND1842OF 1023

Storage Cabinets2 High

18" 30" 271⁄4" FND18302SC $ 1055

36" FND18362SC 1115

42" FND18422SC 1247

3 High

18" 30" 393⁄16" FND18303SC $ 1115

36" FND18363SC 1168

42" FND18423SC 1301

4 High

18" 30" 511⁄8" FND18304SC $ 1168

36" FND18364SC 1238

42" FND18424SC 1370

5 High

18" 30" 641⁄2" FND18305SC $ 1233

36" FND18365SC 1311

42" FND18425SC 1441

Fundamental

Overfiles and Storage Cabinets PricingFUNDAMENTAL®

Metal Filing

FundamentalKimball Surfaces & Storage

Page 5.9

Standard Includes

• Lock: black• Floor glides on storage cabinets;

adjustable to 3⁄4"

How to Specify! Model2 Keying option: KRB = Key random KSB = Key specific (-$ 27 ;

specify lock core separately)3 Finish price group: STD = Group 1

STDM = Group M (+10%)4 Finish designator

Statement of Line ➤See page 5.2

Planning 5.3

Pricing 5.7

Surface Materials 5.11

IMPORTANT: Shelves andwardrobe kits are specified sepa-rately for field installation. Shelvesare adjustable at 2" increments.➤See page 5.10.

Laminate File Tops➤See Footprint Worksurfaces & Support chapter in the Kimball Surfaces & Storage Price List.

GSA SIN 711-3

Page 10: FUNDAMENTAL Table of Contents Metal Filing · FUNDAMENTAL® Overview O Planning Metal Filing Fundamental Kimball Surfaces & Storage Page 5.3 Drawer Pull Options: Three drawer pulls

FundamentalD W H For use with Model Price

Counterweight Kits 11⁄8" 231⁄4" 115⁄8" Any width file FNDACW $ 223

Overfile/Storage Cabinet Shelves 161⁄8" 281⁄2" 1" 30"W unit FND1830LFSHP $ 97

341⁄2" 36"W unit FND1836LFSHP 101

401⁄2" 42"W unit FND1842LFSHP 105

Wardrobe Kits 23⁄4" 291⁄2" 33⁄4" 30"W unit FND1830WB $ 85

351⁄2" 36"W unit FND1836WB 94

411⁄2" 42"W unit FND1842WB 97

Side-to-Side File Bars 30"W file KFD30SS $ 67

36"W file KFD36SS 72

42"W file KFD42SS 77

Drawer Divider 1011⁄16" 31⁄16" 71⁄2" KFDPM $ 43

Accessories PricingFUNDAMENTAL®

Metal Filing

FundamentalKimball Surfaces & Storage

Page 5.10

Standard Includes

• Wardrobe kit: galvanized finish• Side-to-side file bars: galvanized

finish• Drawer divider: galvanized finish

How to Specify

Counterweight Kit, File Bars,Drawer Dividers! Model

Shelf! Model2 Finish price group: STD = Group 1

STDM = Group M (+10%)3 Finish designator

Statement of Line ➤See page 5.2

Planning 5.3

Pricing 5.7

Surface Materials 5.11

IMPORTANT: Counterweight kit,specified separately, is required forall freestanding lateral files.

Shelves and wardrobe kits are specified separately for field installa-tion. Shelves are adjustable at 2" increments.

IMPORTANT: Drawer divider hookson back of drawer body and canbe used in any file.

GSA SIN 711-3

Page 11: FUNDAMENTAL Table of Contents Metal Filing · FUNDAMENTAL® Overview O Planning Metal Filing Fundamental Kimball Surfaces & Storage Page 5.3 Drawer Pull Options: Three drawer pulls

FundamentalKimball Surfaces & Storage

Statement of Line ➤See page 5.2

Planning 5.3

Pricing 5.7

Surface Materials 5.11

Surface Materials

Page 5.11

FUNDAMENTAL®

Metal FilingPaint

Paint

Price Group 1480 Antique White427 Barley437 Cement403 Chamois462 Cinder440 Cloud485 Dark Chocolate405 Designer White453 Environmental Grey459 Featherstone450 Fog488 Frosty White461 Graphite445 Moon Beam416 Putty420 Sandstone425 Shadow465 Smoke460 Storm429 Tantalum419 Wallaby

Price Group M514 Carbon Metallic507 Patina Metallic501 Platinum Metallic505 Satin Bronze Metallic504 Taupe Metallic

Applies to:• Lateral files• Overfiles• Storage cabinets

Applies to:• Arc pulls

462 Cinder485 Dark Chocolate

514 Carbon Metallic501 Platinum Metallic505 Satin Bronze Metallic503 Satin Nickel Metallic544 Silver Pearl

➤See the Surface Materials Reference Guide at www.kimball.comfor a complete overview of the Kimballmaterials program, including:• Characteristics of wood• Special wood finishes• Customer-specified laminate (CSL)• Customer-specified paint (CSP)• Fabric application and colorways• Customer’s own material (COM)

overview• Alliance program • TB133 process

Customer-specified paint (CSP) is available.➤See the Surface Materials Reference Guide.

Page 12: FUNDAMENTAL Table of Contents Metal Filing · FUNDAMENTAL® Overview O Planning Metal Filing Fundamental Kimball Surfaces & Storage Page 5.3 Drawer Pull Options: Three drawer pulls

FundamentalKimball Surfaces & Storage

Page 5.12

FUNDAMENTAL®

Metal FilingNotes