Full List of Glass Related Standards

8/6/2019 Full List of Glass Related Standards

1/3

List of standards 484

List of standards

34

The following standards are relevant to glass and glazing:

BS EN ISO 140 Acoustics

Measurement of sound insulation in buildings and of building elements.BS EN 12758: 2002 Glass in building. Glazing and airborne sound insulation.

Product descriptions and determination of propertiesBS EN ISO 717 Part 1:1997 Acoustic-rating of sound insulation in buildings,

building elements - airbourne sound insulationBS 5821 Part 3:1984 Methods for rating the sound insulation of buildings and

of building elementsBS 8233: 1999 Code of practice for sound insulation and noise reduction for buildings

Noise control

BS 476 Fire tests on building materials and structures(These are test and performance specifications and are not specific to glass)Various parts of the Building Regulations affect design in terms ofconservation of fuel and power, fire safety and means of escape

BS EN 13501 Fire classification of construction products and building elementsBS EN 1363: 1999 Fire resistance testsBS EN 14600: 2005 Doorsets and openable windows with fire resisting and/or smoke

control characteristics. Requirements and classificationBS 5588 Fire precautions in the design, construction and use of buildingsBS EN 357: 2004 Glass in building.

Fire resistant glazed elements with transparent or translucent glass productsClassification of fire resistance

Fire resistance

BS EN 572 Glass in building - Basic soda lime silicate glass productsPart 1: 2004 Definitions and general physical and mechanical propertiesPart 2: 2004 Float glassPart 3: 2004 Polished wired glass

Part 4: 2004 Drawn sheet glassPart 5: 2004 Patterened glassPart 6: 2004 Wired patterened glassPart 7: 2004 Wired or unwired channel shaped glassPart 8: 2004 Supplied and final cut sizesPart 9: 2004 Evaluation of comformity / product standards

BS 952 Glass for glazingPart 1: 1995 ClassificationPart 2: 1980 Terminology for work on glass

BS EN 1036: 1999 Glass in building. Mirrors from silver-coated float glass for internal use

General


2/3

Standards and regulations

List of standards

485 List of standards

34

BS 6206: 1981 Specification for impact performance requirements for flat safety glass andsafety plastics for use in buildings

BS 6262: 1982 Code of practice for glazings for buildingsPart 4: 2005 Safety relating to human impact

BS 6180: 1999 Code of practice - Barriers in and about buildingsBS 5516: 2004 Code of practice for design and installation of sloping and vertical patent glazingBS EN 1063: 2000 Glass in building. Security glazing.

Testing and classification of resistance against bullet attackBS 5357: 1995 Code of practice for installation and security glazingBS EN 356: 2000 Glass in building. Security glazing.

Testing and classification of resistance against manual attackBS EN 13541:2000 Glass in building. Security glazing.

Testing and classification of resistance against explosion pressureBS 6399 Loading for buildings

Part 1: 1996 Code of practice for dead and imposed loadsPart 2: 1997 Code of practice for wind-loadsPart 3: 1988 Code of practice for imposed roof loads

BS 7376: 2004 Specification for inclusion of glass in the construction of tables or trolleysBS 7449: 1991 Specification for inclusion of glass in the construction of furniture,

other than tables or trolleys, including cabinets, shelving systems andwall-hung or free-standing mirrors

BS 8213: 2004 Part 1: Windows, doors and rooflightsCode of practice for safety in use and during cleaning of windows and doors

BS EN 12150 Glass in building. Thermally toughened soda lime silicate safety glassPart 1: 2000 Definition and descriptionPart 2: 2004 Evaluation of conformity/Product standard

BS EN 12600: 2002 Glass in building. Pendulum test.

Impact test method and classification for flat glassBS EN ISO 12543: 1998 Glass in building. Laminated glass and laminated safety glassBS EN 1863 Glass in buildings. Heat strengthened soda lime silicate glass

Part 1: 2000 Definition and descriptionPart 2: 2004 Evaluation of conformity. Product standard

BS EN 14179: 2005 Glass in building. Heat-soaked thermally-toughened soda lime silicate safety glassBS EN 14449: 2005 Glass in building. Laminated glass and laminated safety glass

Evaluation of conformity/product standardBS 8000 Workmanship on building sites

Par 7:1990 Code of Practice for glazingBS EN 14072:2003 Glass in furniture. Test methods

Workplace Regulation 14 Windows, transparent or truslucent doors, gates and walls

Safety, security, design and installation

(Health & Safetyand Welfare)Regulation (1992)


3/3

The Building Regulations Part A: 2004 StructurePart B: 2002 Fire safetyPart E: 2003 Resistance to the passage of soundPart F: 2006 VentilationPart K: 1998 Protection from falling collision and impactPart L1: 2006 Conservation of fuel and power: DwellingsPart L2: 2006 Conservation of fuel and power: Buildings other than dwellings

Part N: 1998 GlazingThe Building (Scotland) Section 0 - General

Section 1 - StructureSection 2 - FireSection 3 - EnvironmentSection 4 - SafetySection 5 - NoiseSection 6 - Energy

The Building Regulations Part D: StructurePart E: Fire safety

Part F: Conservation of fuel and powerPart G: Sound insulation of dwellingsPart H: Stairs, ramps, guarding and protection from impactPark K: VentilationPart V: Glazing

List of standards 486

List of standards

34

It is the responsibility of the purchaseror specifier to ensure that the productordered is appropriate to itsapplication and that its use complieswith all local and national legislation,Building Regulations, standards, codesof practice and any other requirement.

BS EN 1096 Part 1: 1999 Definitions and classificationPart 2: 2001 Requirements and tests method for class A, B and S coatings

Part 3: 2001 Requirements and test methods for class C and D coatingsPart 4: 2004 Evaluation of conformity/Product standard

BS EN 12898: 2001 Glass in building, determination of the emissivityBS EN 1279 Part 1: 2004 Generalities and dimensional tolerances

Part 2: 2002 Long-term testmethod and requirements on moisture vapour penetrationPart 3: 2002 Initial type testing on gas-filled insulating glass units:gas concentration and gas leakage ratePart 4: 2002 Methods of test for the physical attributes of edge sealsPart 5: 2005 Evaluation of conformity/Product standardPart 6: 2002 Factory production control

BS EN 410: 1998 Glass in building. Determination of luminous and solar characteristics of glazingBS EN 673: 1998 Glass in building.

Determination of thermal transmittance ( value). Calculation methodBS EN ISO 12567 Part 1: 2000 Thermal performance of windows and doors.

Determination of thermal transmittance by hot box method.Complete windows and doors.Part 2: 2005 Thermal performance of windows and doors.Determination of thermal transmittance by hot box method. Roof windowsand other projecting windows

BS EN ISO 14438: 2002 Glass in building. Determination of energy balance value. Calculation method

Solar control and thermal insulation

Coated glass

Insulating glass units

(England and Wales)

Regulations 2004Schedules 5 & 6

(Northern Ireland)

Safety, security, design and installation

With active representation on theEuropean Committee for Standardisation,SAINT-GOBAIN GLASS is ideally placedto advise you of developments and toexplain new legislation.

Documents

Full List of Glass Related Standards