-
Custom Printed Designer 2 Dispensers
1
Dispenser Options (minimum 25,000 units):• Choose 1" single
(TFD2D1) or 1/2" duo (TFD2D2) dispenser.
• Choose from several standard flag color options or custom
flag colors available.
• Available as clear dispenser with White back card or
completely
customize back card.
• Available as Opaque White dispenser (no back card
imprint).
• Packaged 25 units per intermediate, 250/case. Special
packaging available, call for quote.
Custom Imprint Options (minimum 25,000 units):• Imprint back
card in up to 4-colors. (Flood coats may bleed.
See next page for imprint areas.)
• Imprint 1" flag (TFD2D1) in up to 2-colors.
• Imprint dispenser top in up to 4-colors. (Also available
at
catalog quantities, visit www.3M.com/promote for details.)
Restrictions:• Exact color match on back cards cannot be
guaranteed. For special
mixes, fluorescent and metallic inks, call for quote.
• Copy change not available.
• Flag printing on 1/2" duo (TFD2D2) not available.
Please call for production time and quote.
Imprint flags and inside
of dispensers (on back card)
in up to 4-Colors!
—25,000 quantity and greater—
Imprint visiblethrough
dispenser top!
Add more impact with flag imprint!
Bold color!Full customization!
Full Customization!
TFD2D1
TFD2D2
See Menu on page 3
for Colors
Custom Printed Designer 2 Dispensers
-
2
View 1, Start Position View 2, End Position
Flag pad shifts from side to side
as flags are dispensed, alternately
exposing imprint on each end —
great opportunity to double the
impact of a single Post-it® Brand
Designer 2 Dispenser!
View 1 View 2
Custom Printed Back Card Example
Please call for production time and quote.
Minimum order:
25,000
Custom Printed Designer 2 Dispensers
-
Custom Printed Designer 2 Dispensers
33M and Post-it are trademarks of 3M. © 3M 2010.
Clear dispenser top and white back card Opaque white
dispenser
1/2" Duo Green/Yellow 1/2" D
uo Gre
en/Yel
low
1/2" Duo Red/Blue
1" Red
1" Yellow
1" Green
1" Blue
Imprint areas on back cards
Imprint areas for dispenser top
Flag Colors and Options
Standard Ink Imprint Colors for Dispenser Top and 1" FlagsNOTE:
Not all colors provide high contrast on dispenser.
Burgundy PMS 215
Brown PMS 168
Blue PMS 300
Black Purple PMS 527
Teal PMS 320
Green PMS 347
White Not available
for all products.
Silver Metallic PMS 877
Gold Metallic PMS 872
Yellow Process
Red PMS 185
Imprint Inside of Dispenser (on back card) in 1–4 Colors!
Visit www.3M.com/promote for dispenser top imprint areas.
TFD2D1 — 1" Single
Two Imprint Areas on Dispenser Top: (denoted by black dotted
line)
.875" x .375" each (critical copy)No Bleeds
TFD2D1 — 1" Single
Two Imprint Areas on Back Card: (denoted by black dotted
line)
.875" x .375" each (critical copy)Bleeds/flood coat allowed.
TFD2D2 — 1/2" Duo
Four Imprint Areas on Back Card: (denoted by black dotted
line)
.375" x .375" each (critical copy)Bleeds/flood coat allowed.
TFD2D2 — 1/2" Duo
Four Imprint Areas on Dispenser Top: (denoted by black dotted
line)
.3125" x .5625" each (critical copy)No Bleeds
1" Flag Imprint — up to 2-colors!
Two Imprint Areas on Flag: (denoted by black dotted line) Top:
.875" x .375" No BleedsBottom/Adhesive Area: .937" x .375"
No Bleeds
copy
copy (adhesive)
1˝ Flag
1" Re
d
1" Bl
ue
1" Gr
een
1" Ye
llow
1/2" D
uo Re
d/Blue
Please call for production time and quote.
