26
Wind - Oil/Gas - On/Offshore - Certificate Welding - Manpower

Full Company Brochure

Embed Size (px)

DESCRIPTION

World Wide Workers A/S

Citation preview

  • Wind - Oil/Gas - On/Oshore - Certicate Welding - Manpower

  • CERTIFICATE WELDING

    The core of World Wide Workers is our years of experience with certified welding assignments for the onshore and offshore industries.

  • World Wide Workers can provide design, third-party approval, pro- duction and documentation within a long range of maritime, energy and offshore equipment.

    We can offer production in our modern workshop, but one of our strengths is onsite welding to minimize downtime for our customers. Our skilled welders are all certi-fied, third-party approved and using our state of the art welding equipment.

    Regardless of size and complexity we can take on all kinds of welding assignments based upon your needs and requirements. We can handle alle processes for smaller construction or equipment from design to documentation inhouse in our state of the art work-shop. With the addition of the facilities of Lind Indus-trial Park we can also take on largescale assignments.

    Our experienced and certified welders can also func-tion on manpower basis, for onsite welding tasks this goes for both regular welding assignments and assignments with high documentation requirements.

    Possibility of documentation for all processes in workshop and on site meeting ISO 3834-2 & EN 1090-2 Ex3DNV approved inhouse WPQR for: - Carbon steel - Stainless steel - Duplex - SuperduplexProduction meeting offshore standards: - NORSOK - MOTS12 - DNV 2.7-1/EN 12079-1 - DNV OS-C401

    For further information and contact, please visit our website: www.worldwideworkers.dk

    Office: Kystvejen 100 B 1. Sal, kontor 8, 5330 Munkebo, DenmarkWorkshop: Garbksvej 2, 5330 Munkebo, DenmarkPhone: + 45 63 817 817

    CERTIFICATE WELDING

    STANDARDS DOCUMENTATION

  • OIL & GAS

    World Wide Workers has a broad knowhow from the oil & gas market and offers trained manpower and manu-facturing of products to the on- & offshore industries.

  • With a vast knowledge from assignments in the international off-shore industry, World Wide Workers can accommodate a wide range of onsite fabrication and welding services.

    World Wide Workers can handle all processes spanning from design to documenta-tion within the production of offshore equipment in all materials and with a wide selection of different coating systems.

    Our experienced and certified personnel can also func-tion on a manpower basis for assignments on both on- and offshore sites. Our staff has a wide range of skills in welding, shipbuilding, pipe and construction.

    Along with the specilized and certified welding skills our employees are trained by wellknown suppliers in a wide range of offshore courses to ensure high levels in HSE and Quality in these challenging work environments.

    On the production side we offer production processes based on the highest offshore standards including, but not limited to; DNV OS-C401, DNV 2.7-1/EN 12079-1, MOTS12, & NORSOK.

    Certificate Welding - ISO 3834-2 Piping structuresOffshore trained personnelSkids & spoolsLifting appliances and frames for HPUHandling equipmentDNV approved inhouse WPQR for: - Carbon steel - Stainless steel - Duplex - Superduplex

    For further information and contact, please visit our website: www.worldwideworkers.dk

    Office: Kystvejen 100 B 1. Sal, kontor 8, 5330 Munkebo, DenmarkWorkshop: Garbksvej 2, 5330 Munkebo, DenmarkPhone: + 45 63 817 817

    OIL & GAS

    SKILLS & PRODUCTS MANPOWER & WELDING

  • WIND POWER

    At World Wide Workers, we offer trained and experi-enced technicians and service teams with a wide range of skills for the international Wind power industry.

  • For the last three years, World Wide Workers has been part of Siemens Wind Powers major project in England.

    Our trained and certified wind turbine technicians join the existing service teams and perform a long range of welding, repair, troubleshooting and retrofit assign-ments in some of the biggest wind farms in the world.

    To maintain high levels of quality we have designed a special, third-party approved training program for the employees joining our wind turbine crew.

    Furthermore wellknown suppliers, such as Maersk Training and Falck Safety Services, train our wind tur-bine crew to all required Global Wind Organisation standards, and we continue to train them regularly.

    Our turbine crew have full GWOs consisting of Work-ing at Height, First Aid, Sea survival, Manual Handling & Fire awareness and are wellrounded an experi-enced with the offshore turbine work.

    Siemens Wind Power Training level 2, 3 & 4

    Full GWO

    Certificate Welding

    Repair & troubleshooting

    Service & retrofit

    Confined Spaces

    Rope Access

    Banksman Slinger Course

    For further information and contact, please visit our website: www.worldwideworkers.dk

    Office: Kystvejen 100 B 1. Sal, kontor 8, 5330 Munkebo, DenmarkWorkshop: Garbksvej 2, 5330 Munkebo, DenmarkPhone: + 45 63 817 817

    WIND POWER

    TRAINING & SKILLS OUR WIND TURBINE CREW

  • MANPOWER

    For almost 10 years World Wide Workers has been supplying the international steel and offshore industry with skilled and trained manpower for a wide range of welding, and construc-tion assignments.

  • We have a wide range of skilled craftsmen, who can all function on a manpower basis for both longterm and time-limited assignments.

    Our employees have experience from various construction sites in the Danish and international steel industry, and they can join existing service teams as well as solve tasks on an individual basis. They have extensive knowhow from jobs in the mari-time, offshore and energy sector and all the relevant courses to continuously be available for similar tasks.

    At World Wide Workers, we only employ craftsmen with do-cumented and proven skills, and we maintain and broaden their skills through training and more courses. We take responsibility for the training and continuous certification of our employees.

    We work in potentially hazardous environments, so it is important for us that our employees are trained to avoid incidents and accidents and conduct them-selves in a safe, healty and ethically sound way. All new employees have a mandatory introductory QHSE course, followed by a yearly brush-up course. All em-ployees receive an Employee Handbook informing about World Wide Workers QHSE areas and behav-ioural guidelines they are expected to uphold.

    Certificate welders

    Wind turbine technicians

    Offshore trained personnel

    Industrial service teams

    Skilled blacksmiths

    Shipbuilders

    Pipe fitters

    Plumbers

    Assembly teams

    For further information and contact, please visit our website: www.worldwideworkers.dk

    Office: Kystvejen 100 B 1. Sal, kontor 8, 5330 Munkebo, DenmarkWorkshop: Garbksvej 2, 5330 Munkebo, DenmarkPhone: + 45 63 817 817

    MANPOWER

    OUR EMPLOYEES QHSE-TRAINING

  • PRODUCTION FACILITIES

    World Wide Workers can provide design, third-party approval, production and documentation within a long range of maritime, energy and offshore equipment.

  • In our state of the art workshop we can handle all processes, from design to documentation, related to the manufacturing of structures and products for the offshore industry.

    We offer production processes based on the highest onshore and offshore stand-ards including, but not limited to; ISO 3834-2, EN 1090-2 Ex3, DNV 2.7-1/EN 12079-1, MOTS12 & NORSOK

    At our ISO 9001 & ISO 3834-2 certified workshop in Munkebo on Funen our certified welders can take on manufacturing of various products for the maritime, energy and offshore sector. In august of 2014 we joined Lind Industrial Park just one kilometre away from our workshop, this increased our capacity dra-matically, and we can now take on the manufacturing of larger structures and amounts.

    We can work on docked ships or handle the process of prefabricated structures from workshop to onsite assembly all the way to the quay. In line with the mari-time, offshore and energy sectors high pace, we offer quick response and delivery time.

    400 m2 of dynamic workshop space + includable surrounding areas - ISO 9001Inhouse welding coordinator - ISO 3834-2DNV approved inhouse WPQR

    Production halls up to 12.444 m2 6.4 million m2 of industry & port areaIndustrial port 11 m. deep with 11 x 60 m. naviga-tion channel4400 m. of industrial quay with crane coverage + mobile cranesLifting capacity up to 1000 tons

    Lind Industrial Park:

    Our Workshop:

    For further information and contact, please visit our website: www.worldwideworkers.dk

    Office: Kystvejen 100 B 1. Sal, kontor 8, 5330 Munkebo, DenmarkWorkshop: Garbksvej 2, 5330 Munkebo, DenmarkPhone: + 45 63 817 817

    PRODUCTION FACILITIES

    CAPACITY EXPERIENCE

  • QUALITY MANAGEMENT

    World Wide Workers has an ISO 9001 approved quality management system that facilitates and monitors all processes in the company.

  • World Wide Workers has a thoroughly tested quality management system, which factors in Quality, Health, Safety and Environment ar-eas for a wellrounded and highly userfriendly structure.

    Our quality management system maintains the consistency in the services we pro-vide corresponding with our internal quality politics and ensures a constant focus on improvement through a series of control and optimization processes.

    All employees are introduced to our quality man-agement system upon their employment. Through a mandatory safety and quality course, they are intro-duced to the system and get an insight into how their work areas are regulated and should be performed in accordance to the system. All employees are ex-pected to uphold the processes and quality politics embedded in their daily assignments and take part in the on-going improvement of the system. Our re-lationship with subcontractors and suppliers is also regulated within the system. All subcontractors are assessed, approved and monitored through Q&A, log-ging of problems and variations on projects and gene-ral QHSE levels.

    ISO 9001:2008 certification of our quality manage-ment system.

    ISO 3834-2 certification of the quality require-ments for welding.

    EN 1090-2 Certification for Execution Class 3 and CE labelling of structural steel.

    Full Achilles JQS prequalifying us as supplier for the oil & gas industry.

    Sellihca prequalifying us as supplier for the wind power and utilities sector.

    QUALITY IMPROVEMENT

    QUALITY CONTROL

    QUALITY ASSURANCE

    QUALITY PLANNING

    CUSTOMER

    PROJECT MANAGER

    PROJECT COORDINATOR

    EMPLOYEE EMPLOYEE

    CUSTOMER

    INCOMING PROJECT

    PLANNING.IDENTIFICATION

    OF NEED &DEMANDS.

    ALLOCATION OFRESSOURCES

    INFORMING & PREPARING EMPLOYEES

    EXECUTION + ON-GOING CONTROL &

    EVALUATION

    COMPLETION OF PROJECT

    DELIVERY TO CUSTOMER. EVALUATION

    WITH CUSTOMER

    IMPROVEMENTS

    FOR SYSTEM

    For further information and contact, please visit our website: www.worldwideworkers.dk

    Office: Kystvejen 100 B 1. Sal, kontor 8, 5330 Munkebo, DenmarkWorkshop: Garbksvej 2, 5330 Munkebo, DenmarkPhone: + 45 63 817 817

    QUALITY MANAGEMENT

    CURRENT & FUTURE CERTIFICATIONS QUALITY

  • HSE

    At World Wide Workers, we take pride in training our employees in creating a healthy, safe and environmen-tally friendly work situation benefitting themselves and their surroundings.

  • At World Wide Workers, we base our HSE strategy on high levels of knowledge, training and information to ensure a healthy, safe and ethically sound workplace.

    We are aiming for a working environment free from injuries, accidents and overload of our staff and the environment, and we are in a constant and constructive dialogue with our partners and employees to find ways of improving in the HSE areas.

    Our goals in HSE are very clear: - Zero accidents! - Reduce impact on environment! - Take interest in the general health of all employees!

    This means caring for our employees on and of work to make sure they are healthy, safe and knowledge-able. Our employees work in potentially hazardous environments, so it is important for us that they pos-sess the necessary knowledge, education and train-ing in order to avoid incidents and accidents. Along with an introductory safety and quality course all new employees receive an Employee Handbook inform-ing about QHSE areas, behavioural guidelines, politics and company goals.

    Quality management system, which actively fac-tors in HSE areas Mandatory introductory safety & quality training for new employeesMandatory yearly safety training for all employeesInternal audit system9 point green plan for reducing impact on the environmentEmployee commitee working on improvement of HSEEmployee handbookFree health checks for all employees

    For further information and contact, please visit our website: www.worldwideworkers.dk

    Office: Kystvejen 100 B 1. Sal, kontor 8, 5330 Munkebo, DenmarkWorkshop: Garbksvej 2, 5330 Munkebo, DenmarkPhone: + 45 63 817 817

    HSE

    HSE AREAS EMPLOYEE HANDBOOK

  • STRONG HYDRAULIC KNOWHOW

    We offer technical support and service solu-tions for hydraulic assignments for a wide vari-ety of industries.

  • World Wide Workers has many years of in-house knowledge and ex-perience with design and manufacturing of hydraulic systems as well as onsite installation and service.

    We can offer production in our state of the art workshop, delivering systems and solutions for a wide range of machinery, vessels and rigs in both onshore, offshore and maritime industries.

    We handle in-house design and engineering of hy-draulic systems with full documentation for all pro-cesses. To be able to deliver high quality construction is carried out in our ISO 3834-2 certified workshop by our skilled fitters and welders. All procurement, ma-nufacturing and testing is handled within our ISO 9001 certified quality management system and over-seen by an experienced hydraulics project manager.Our experienced service team can handle installa-tion of all types of units and systems, completing satisfactory onsite testing while focusing on minimal downtime and reducing disturbance to the ongoing operations and maximum installation flexibility and performance.

    Design and production of hydraulic power packs and similar units.

    Service and overhaul of various hydraulic units for example hydraulic cylinders and power packs.

    Onsite installation and assembly of complete units, components and parts and piping for hy-draulic systems including flushing referenced to ISO 4406/NAS 1638.

    Upgrade and retrofit assignments including ser-vice and improvement of hydraulic installations.

    For further information and contact, please visit our website: www.worldwideworkers.dk

    Office: Kystvejen 100 B 1. Sal, kontor 8, 5330 Munkebo, DenmarkWorkshop: Garbksvej 2, 5330 Munkebo, DenmarkPhone: + 45 63 817 817

    STRONG HYDRAULIC KNOWHOW

    WE OFFER OUR PROCESS

  • PIPE CONSTRUCTION & INDUSTRIAL SERVICE

    At World Wide Workers, we have built up exten-sive knowhow in working on existing installa-tions and producing new pipe constructions.

  • World Wide Workers has extensive knowhow from many years in pipe construction, and we are able to deliver a long range of products and skilled service teams to perform the fitting.

    We can assume both the overall main contract with responsibility for all processes and manning or function as subcontractor with our specialized skills in welding, construction and assembly.

    We have experience with a wide range of pipe con-struction tasks spanning from industry service en-tailing maintenance and repair, to construction of new pipe structures all performed to the highest industry standards. We have worked at CHPs, pow-er plants and nuclear power plants all over Scandi-navia.

    In our state of the art workshop, our experienced staff can produce skids, spools, pipes and lifting equipment for onshore and offshore use. We offer production processes based on the highest stan-dards and work in accordance with ISO 9001:2008

    PED Prefabrication AssemblyShutdownCertificate WeldingDNV approved inhouse WPQR for: - Carbon steel - Stainless steel - Duplex - Superduplex

    For further information and contact, please visit our website: www.worldwideworkers.dk

    Office: Kystvejen 100 B 1. Sal, kontor 8, 5330 Munkebo, DenmarkWorkshop: Garbksvej 2, 5330 Munkebo, DenmarkPhone: + 45 63 817 817

    PIPE CONSTRUCTION & INDUSTRIAL SERVICE

    SKILLS EXPERIENCE

  • STEEL CONSTRUCTION

    World Wide Workers supplies the international steel industry with manpower for a wide range of welding and construction assignments.

  • Participation in various, large construction assignments has given World Wide Workers comprehensive and valuable experience with the Danish and international steel industry.

    At World Wide Workers, we can cooperate with our customers on many different levels and partake in all processes on the construction site in cooperation with archi-tects, engineers and contractors.

    Main contract: As the main contractor we can assume the overall responsibility for consultancy, manpower, timely execution and approval within a ISO 9001 certi-fied project management system.Subcontractor: We can also act as a subcontractor with our specialized skills in welding, construction and assembly on a project or hourly basis. Total solutions: We can undertake assignments in manufacturing with one point of contract for the en-tire process. In our ISO 3834-3 certified workshop in Munkebo, we can take on the responsibility for all processes from design to documentation of smaller steel solutions with full documentation, and with the addition of the facilities of Lind Industrial Park we are capable of taking on large scale construction as well.

    Production in accordance with EN 1090-2 Execu-tion Class 3 & CE labelling of structural steel

    Walkways & handrails

    Large assembly projects

    Bridge construction

    Balcony & terrace

    Doors & entrance structures

    Production in ISO 3834-2 approved workshop fa-cilities.

    Production in industrial heavy duty facilities with crane and quay facilities.

    For further information and contact, please visit our website: www.worldwideworkers.dk

    Office: Kystvejen 100 B 1. Sal, kontor 8, 5330 Munkebo, DenmarkWorkshop: Garbksvej 2, 5330 Munkebo, DenmarkPhone: + 45 63 817 817

    STEEL CONSTRUCTION

    PRODUCTS SKILLS

  • MARITIME SERVICE & REPAIR

    World Wide Workers offers a wide range of services in ship and vessel repair based on our extensive experience from the Danish and international maritime industry.

  • World Wide Workers can provide design, third-party approval, pro-duction and documentation within a longe range of maritime and off-shore equipment.

    We can offer production in our state of the art workshop, but one of our strengths is onsite welding to minimize downtime for our customers. World Wide Workers ac-comodates a wide range of onsite fabrication and welding services for the maritime industry.

    We can perform new build, maintenance, repair and emergency breakdown work on everything from smaller sailing boats to large container ships. We work on shipyards all over Denmark and we also undetake work on ships sailing in route all over the world.

    All equipment can be designed and fabricated in car-bon steel and aluminium, and we can provide a wide selection of different coating systems based upon your specification.

    We offer design based on the latest offshore stand-ards including, but not limited to; DNV 2.7-1/EN 12079-1 & NORSOK, as well as MOTS12.

    Certificate Welding

    Piping

    Sea Fastning, walk ways & masts

    Lifting appliances

    Skids & spools

    Hydraulics

    Motor installation and repair

    Handling equipment

    For further information and contact, please visit our website: www.worldwideworkers.dk

    Office: Kystvejen 100 B 1. Sal, kontor 8, 5330 Munkebo, DenmarkWorkshop: Garbksvej 2, 5330 Munkebo, DenmarkPhone: + 45 63 817 817

    MARITIME SERVICE & REPAIR

    SKILLS & PRODUCTS MARITIME WORK

  • BALLAST WATER TREATMENT INSTALLATION

    World Wide Workers can undertake full engineering, documentation for all processes and complete installa-tion and retrofitting of ballast water treatmant tanks on

    ships in dock and in route.

  • World Wide Workers can provide full measuring, prefabrication, in-stallation, service and full documentation for all processes within bal-last water treatment facilities on board a variety of ships and vessels.

    World Wide Workers cooperates closely with GEA in the installation of the Trojan Marinex Ballast Water Treatment and we solve both simple and complicated instal-lations of this DNV IMO Type Approved unit.

    From the beginning of the process World Wide Workers un-dertakes onsite manual or 3D measurements on ships in dock as well as in route with minimal disturbance to the on-going operations.We can deliver in-house engineering or work with selected engineering partners to construct the optimal ballast water tretmant facility for the specific vessel.To be able to deliver robust and high quality construction, prefabrication is carried out in our ISO 9001 and ISO 3834-2 certified workshop by our skilled welders and fitters to minimize time spent on onboard installation. This in turn is carried out by our experienced maritime service division, securing a high quality turnkey solution with minimal down-time and maximum installation flexibility.

    Purpose-built and customdesigned system for the ma-rine environment with dual technology integration - Fil-tration and UV in one unit.

    32 micron filter elements, designed for ballast water treatment and tested in all three salinity varieties.

    One housing Module - All active components in the units are fitted within the same housing.

    The TrojanUV Solo Lamp combines the best features of high efficiency, long lamp life and high UV output in a lab and field tested proprietary one unit technology.

    GEA BallastMaster marineX powered by Trojan Marinex

    C

    M

    Y

    CM

    MY

    CY

    CMY

    K

    For further information and contact, please visit our website: www.worldwideworkers.dk

    Office: Kystvejen 100 B 1. Sal, kontor 8, 5330 Munkebo, DenmarkWorkshop: Garbksvej 2, 5330 Munkebo, DenmarkPhone: + 45 63 817 817

    BALLAST WATER TREATMENT

    TROJAN MARINEX OUR PROCESS

  • WORLD WIDE WORKERS

    Sales & OceKystvejen 100 B5330 MunkeboDenmark

    WorkshopGarbksvej 25330 MunkeboDenmark

    Contacttlf +45 63 817 817fax +45 63 817 818worldwideworkers.dk

    forside brochure issuuCertificate Weldingforside certifcate weldingbagside certificate welding

    Oil & gasforside certifcate weldingbagside certificate welding

    Wind Powerforside wind powerbagside wind power

    Manpowerforside manpowerbagside manpower

    Production Facilitiesforside production facilities2bagside production facilities2

    Quality Managementforside quality managementbagside quality management

    HSEHydraulicforside hydraulicbagside strong hydraulic knowhow

    Pipe Construction & Industry Serviceforside pipe construction & industry servicebagside pipe construction & industry service safety1

    Steel Constructionforside steel constructionbagside steel construction

    Martime Service & Repairforside maritime service & repairbagside maritime service & repair

    Ballast Water Treatment Installationforside ballast water treatmentbagside ballast water treatment

    bagside brochure issuu