DISPENSING FUEL HSE CONSIDERATIONS1

FUEL TANKERSRoad tankers which refuel vehicle, mobile andstatic plant shall be subject to inspection and approval by ClientThe following will be verified: the road condition and equipment of the Tanker the integrity of the fuel pumping / transfer system the earth bonding system the registration of the vehicle the drivers license2

REFUELING The refueling location will be safe by position Refueling activities will not take place on site roads Refueling will not take place within 30 meter's of hot work Engines will be switched off before refueling Earth bonding will be hooked up before every refueling No smoking shall be permitted during refueling DCP Fire extinguishers will be available3

CONNECTING AND DISPENSINGEnsure that any plant/equipment into which you aregoing to dispense fuel is switched off.

Connect up your Earth Bonding Line - Ensure positive Metal to Metal contact.

If your Fuel Hose has been changed out, confirm thatnew fuel hose is anti-static type before connecting up.

Connect up your Fuel Hose - Handle carefully to avoid spillage in case any residual fuel is in the line from its last usage.

Switch on your Pump.

Monitor the delivery and record as required. Do not leaveyour Tanker during pumping operations. Ensure no Spillage.4

DISCONNECTING AFTER DISPENSINGSwitch off your Pump.

Disconnect your Fuel Line - Ensure that no residual fuelremains in the line - Ensure no spillage.

Stow your Fuel Line correctly in the designated place on your vehicle.

Disconnect your Earth Bonding line.

NOTE THAT THAT LAST THING YOU DO IS TO DISCONNECT THE EARTH BONDING LINE

5

STATIC ELECTRICITYAll materials flowing through pipes generate StaticElectricity.

All Vehicles travelling along the road generate Static Electricity.

Static Electricity builds up and must be dissipated toearth.

Static is built up EVERY time you travel and EVERYtime you receive or dispense fuel.

The purpose of your Earth Bonding Line is to ensurethat Static Electricity which had built up in and on yourtanker has a safe and continuous path to earth.

6

STATIC ELECTRICITYFilling HoleFilling NozzleFuel LineEnsure Metal to Metalcontact between FillingNozzle and Rim of FillingHole7

STATIC ELECTRICITYFilling HoleFilling NozzleFuel LineIf there is a gap between filling nozzle and the rim of filling hole, static electricity will arc across thegap in the form of sparks. These sparks are hotenough to ignite the fuel vapors/air mixture which exists around the filling hole.8

HEALTH9Diesel and Petrol are De-fatting Agents.

Avoid excessive Skin Contact with Petroland Diesel.

After dispensing fuel, wash Hands before Eating or Drinking.

Dont wear Overalls which are contaminated byPetrol or Diesel.

Wash any splashes off the Skin.

ENVIRONMENTAL PRESERVATION10Prevent Spillage of Petrol and Diesel.

Check connections for Leakage.

Spillage should be cleaned up promptly.

Dispose of Oil Lift as Contaminated Waste.

Dispose of Cleaning Cloths as ContaminatedWaste.

Spillage of Petrol or Diesel is harmful to Plantsand Animals.