Specifications Dimensions

Performance

FT Series

Temperature

ture TEM

PERA

TUR

E

FT Size Size L x W x H FT38 3/8 inch 60mm x 20mm x 24mm FT12 1/2 inch 70mm x 22mm x 27.5mm FT34 3/4 inch 85mm x 29mm x 34mm

FT100 1 inch 96mm x 37mm x 42mm

specification sensor temperature range1 10 °C to 90 °C (50°F to 194°F)6 applicable chemistry virtual any chemistry maximal working pressure2 check out max. pressure for specific temperature and sensor size in pressure graph

specification sensing element measuring range1 ±0°C to 150°C (32°F to 302°F)

(PT100, PT1000) accuracy3 ±0.25°C (±0.45°F) @ 90°C (194°F) standard | up to ±0.075°C (±0.135°F) on request interchangeability3 ±0.13°C (±0.234°F) @ 20°C (68°F) standard | up to ±0.04°C (±0.072°F) on request long term stability @ 150°C less than 0.04%

element response time T50 T63 in water stream (v = 0.4m/s) 0.05 sec 0.08 sec

sensor rise time3 T63 T904 < 0.6 sec < 1.0 sec @ 1m/s (purified water)

wetted material thermal conduction element Al2O3 (99.99987% purity) body virgin PTFE optional body (only on request) PFA

material - no media contact

top and bottom cover PVDF sensing element platinum thin film element fixing elements stainless steel screws (A4 grade) cable 4 line shielded litz wire FEP insulation sealing Perfluorelastomer FFKM (ultra pure)

fluid connection available size5 for 3/8" to 1" tube size (e.g. Pillar Fitting®, Flaretek®, Swagelok® and more)

pressure drop coefficient

3/8" Cv = 7.73 [US gpm] | Kv = 6.68 [m3/h] 1/2" Cv = 30.08 [US gpm] | Kv = 26.03 [m3/h] 3/4" Cv = 248 [US gpm] | Kv = 213.3 [m3/h] 1" Cv = 525 [US gpm] | Kv = 451.5 [m3/h]

1 higher temperature on request | 2 higher pressure on request | 3class F0.1 DIN standard (higher on request) | 4 time to reach 63% 90% of final value for whole sensor assembly | 5 customized size on request | 6HF49% limited to 80°C (176°F)

The FT series thermo sensors made out of fluorocarbon plastic like PTFE or PFA are specially designed for monitoring the temperature of ultrapure water, chemicals and gases for the semiconductor, photovoltaic or other related industries. Due to the innovative sealing and used sapphire sensing technology, no contamination, liquid entrapping or rapid aging effects takes place. The monitoring of aggressive ultra pure fluids or gases without sensing drifts over long periods are guaranteed. Patent granted.

§ Measuring characteristics as per DIN EN 60751

§ Best accuracy, repeatability and stability

§ Ultra fast response time

§ Made out of ultra pure and chemical inert materials

§ PT100 or PT1000 measuring technology

§ Useable with a broad range of connection technologies (Pillar®, Flaretek®, Swagelok® and many more)

PTFE

Performance

1 FT_REV2.5

Maximum pressure vs. tube size

Note: Information presented enclosed is subject to change as product enhancements are made on a regular basis.

* all sizes standardized at 1m/s water flow velocity

TEMPER

ATU

RE

Technical Data Sensing Elements (PT100 / PT1000)*

Type: Platin thin film element (thin film technology)

Specification: DIN EN 60751:2009-05

Standard temperature range: -0°C to +150°C (32°F to +302°F)*

Standard temperature coefficient: PT100 (PT1000) | TCR = 0.00385!!! * Standard tolerance class: standard: F0.1 | optional: 1/5 DIN B, 1/10 DIN B* Recommended applied current: 1mA @ 100Ω (0.3mA @ 1000Ω)

*other tolerance classes, temperature ranges, temperature coefficients or ohmic values on request

Technical Data Cable

Type: 4 wire cable / shielded / FEP insolation

Specifications: MIL-C-27500, MIL-W-16878 and ASTM-B-298

Temperature range: -200°C to +200°C (-328°F to +392°F)

Insulation class: ET+ (up to 250V AC eff) Type litz wire: silver plated copper wire

Connection Plan

Optional: Contact manufacturer for specific fitting assembly, different cable length or different class/type of sensor element.

Model Max.depth[mm]

FT38 23FT12 28FT34 38FT100 42

2 FT_REV2.5

Pressure drop coefficient Cv

Note: don’t connect wires which are not used, it will effect accuracy!

Sensor labeling according DIN EN 60751:2009-05 Example: ---------------------------------- 1xPt100/F0.1/4/+10/+90----------------------------------

Scope of delivery

• Cable length: 2 meters • PTFE (PFA) housing • Tube ends / no fittings

Use of proper flare tool Orientation and flow direction

! Measuring characteristics as per DIN EN 60751

! Best accuracy, repeatability and stability

! Fast response time

! Highest thermo-chemical resistance while maintaining ultra pure performance

! PT100 or PT1000 measuring technology

! Useable with a broad range of connection technologies (Pillar®,

Flaretek®, Swagelok® and many more)

Specifications

Maximum pressure vs. tube size

Dimensions

TEMPER

ATUR

E

1 FC_REV2.2

Performance

FC Series Data Sheet

FC Series:::....

FC series size

Fitting size L x W x H

FC38 3/8 inch 60mm x 20mm x 24mm

FC12 1/2 inch 70mm x 22mm x 27.5mm x

FC34 3/4 inch 85mm x 29mm x 34mm

FC100 1 inch 96mm x 37mm x 42mm

specification sensor

temperature range1 10 °C to 130 °C (50°F to 266°F)

applicable chemistry virtual any chemistry

maximal working pressure2 check out max. pressure for specific temperature and sensor size in pressure graph

specification sensing element (PT100, PT1000)

measuring range1 ±0°C to 150°C (32°F to 302°F) accuracy3 ±0.25°C (±0.45°F) @ 90°C (194°F) standard | up to ±0.075°C (±0.135°F) on request interchangeability3 ±0.13°C (±0.234°F) @ 20°C (68°F) standard | up to ±0.04°C (±0.072°F) on request long term stability @ 150°C less than 0.04% element response time T50 T63 in water stream (v = 0.4m/s) 0.05 sec 0.08 sec

sensor rise time3 T63 T904 < 0.7 sec < 1.1 sec @ 1m/s (purified water)

wetted material thermal conduction element C (vitreous carbon) body virgin PTFE optional body -

material - no media contact

top and bottom cover PVDF sensing element platinum thin film element fixing elements stainless steel screws (A4 grade) cable 4 line shielded litz wire FEP insulation sealing Perfluorelastomer FFKM (ultra pure)

fluid connection available size5 for 1/4" to 1" tube size (e.g. Pillar Fitting®, Flaretek®, Swagelok® and more)

Pressure drop coefficient

3/8“ Cv = 7.73 [US gpm] | Kv = 6.68 [m3/h] 1/2“ Cv = 30.08 [US gpm] | Kv = 26.03 [m3/h] 3/4“ Cv = 248 [US gpm] | Kv = 213.3 [m3/h] 1“ Cv = 525 [US gpm] | Kv = 451.5 [m3/h]

1 higher temperature on request | 2 higher pressure on request | 3 class F0.1 DIN standard (higher on request) | 4 time to reach 63% 90% of final value for whole sensor assembly | 5 customized size on request Note: Information presented enclosed is subject to change as product enhancements are made on a regular basis

The FC series thermo sensors made out of fluorocarbon plastic (PTFE) are specially designed for monitoring the temperature of ultrapure water, chemicals and gases for the semiconductor, photovoltaic or related industries. Due to the innovative sealing and used carbon sensing technology, no contamination, liquid entrapping or rapid aging effects takes place. The monitoring of aggressive ultra pure fluids or gases in high temperature environments without sensing drifts over long periods are guaranteed. Patent granted.

>> Highest thermo-chemical resistance <<

TEMPER

ATUR

E

FC_REV2.2 2

FC series Data Sheet

Technical Data Sensing Elements (PT100 / PT1000)*

Type: Platin thin film element (thin film technology)

Specification: DIN EN 60751:2009-05

Standard temperature range: -0°C to +150°C (32°F to +302°F)*

Standard temperature coefficient: PT100 (PT1000) | TCR = 0.00385!"# * Standard tolerance class: standard: F0.1 | optional: 1/5 DIN B, 1/10 DIN B* Recommended applied current: 1mA @ 100Ω (0.3mA @ 1000Ω)

*other tolerance classes, temperature ranges, temperature coefficients or ohmic values on request

Technical Data Cable

Type: 4 wire cable / shielded / FEP insolation

Specifications: MIL-C-27500, MIL-W-16878 and ASTM-B-298

Temperature range: -200°C to +200°C (-328°F to +392°F)

Insulation class: ET+ (up to 250V AC eff) Type litz wire: silver coated copper wire

Connection Plan

Optional: Contact manufacturer for specific fitting assembly, different cable length or different class/type of sensor element. .

Model Max. depth [mm] FT38 23 FT12 28 FT34 38

FT100 42

Pressure drop coefficient Cv:

Note: don’t connect wires which are not used, it will effect accuracy! Scope of delivery

• Cable length: 2 meters • PTFE (PFA) housing • Tube ends / no fittings

Use of proper flare tool

Sensor labeling according DIN EN 60751:2009-05 Example: ---------------------------------- 1 x Pt100/F0.1/4/+10/+90 ----------------------------------

Specifications

Dimensions!!

TEM

PE

RA

TUR

E

FT Immersion:....

specification sensor

temperature range1 max. 100°C (212°F)1

applicable chemistry! virtual any chemistry

working pressure2 atmospheric pressure2

specification sensing element

measuring range -50°C to 150°C (-58°F to 302°F)

accuracy 3 ±0.08°C @ 100°C (212°F)3 interchangeability3 ±0.0425°C @ 25°C (77°F)3

repeatability / stability less than ±0.05°C

element response time T50 T63 in water stream (v = 0.4m/s) 0.05 sec 0.08 sec sensor rise time3 T63 T904 ~0.6 sec 1 sec @ 1m/s (purified water)

wetted material

thermal conduction element Al2O3 (99.99987% purity)

body virgin PTFE (PFA on request) sealing Perfluorelastomer FFKM (ultra pure)

material - no media contact

outlet fitting cable PVDF (Viton sealing)

sensing element platinum thin film element cable 4 line shielded litz wire with PTFE insulation (FEP on request)

size5 check dimensions above

1 higher temperature on request | 2 higher pressure on request | 3 class 1/10 DIN | 4 time to reach 63% 90% of final value for whole sensor assembly | 5 customized size on request

The FT Immersion thermo sensors made out of fluorocarbon plastic like PTFE or NEW PFA are specially designed for measuring bath temperatures of ultrapure water, chemicals and gases for the semiconductor, photovoltaic or other related industries. Due to the innovative sealing and used sapphire sensing technology, no contamination, liquid entrapping or rapid aging effects takes place. The monitoring of aggressive ultra pure fluids or gases without sensing drifts over long periods are guaranteed. Patent pending.

! Measuring characteristics as per DIN EN 60751

! Best accuracy, repeatability and stability

! Ultra fast response time

! Made out of ultra pure and chemical inert materials

! PT1000 measuring technology

FasTemp size

Fitting size

L x D1 x D2 mm

!Immersion N.A. 110 x 20 x 15

!

DEC!2014!1

TEM

PE

RA

TUR

E

Technical Data Sensing Element

Type: Platin thin film element (Thin film technology)

Specification: DIN EN 60751:2009-01

Standard temperature range: -50°C to +150°C (-58°F to +302°F)*

Standard temperature Coefficient: TCR = 0.00385!!! * Standard tolerance Class AA (1/3 DIN B)*

*other tolerance classes, temperature ranges or temperature coefficients on request

Technical Data Cable

Type: 4 wire cable / shielded / FEP insolation

Specifications: MIL-C-27500, MIL-W-16878 and ASTM-B-298

Temperature range: -200°C to +200°C (-328°F to +392°F)

Insulation Class ET+ (up to 250V AC eff) Type litz wire: silver coated copper wire

Connection Plan Sensor labeling according DIN EN 60751:2009-01 Example: !!!!!!!!!!!!))))))))))))))))))))))))))))))))))! 1"x"Pt1000/AA/4/*50/+150"!!!!!!!!!!!!!))))))))))))))))))))))))))))))))))!

Scope of delivery

• Cable length: 2 meters • 1/3 DIN B temperature sensor element

Optional: Different cable length or different class/type of sensor element.

DEC!2014! 2