311 Abbe Rd. Sheffield Lake, Ohio 44054 Phone: 440-949-2400 Fax: 440-949-2900 Email: sales@fsinorth.com

Visit us on the web at www.fsinorth.com

FSI® DAT® AL Series® “Quick Erect” Aluminum Frame Shelters

01/16V

FSI®DAT®AL SERIES®

FSI® PROUDLY OFFERS THE THICKEST, TOUGHEST, MOST DURABLE ALUMINUM FRAMED SHELTER SYSTEM ON THE MARKET. THE OCTAGONAL FRAME SHELTER

‘LEGS’ OFFER A 43MM CROSS SECTION WITH A 2MM WALL THICKNESS OF ALUMINUM “ALLOY 6060T6” IN A ‘FRICTION PROOF’ SHELTER SET UP/TEAR DOWN DESIGN.

CORNERS

The tent roof corners and all points of contact with aluminum frame reinforced with PVC components.

PROTECTED

Rubber covers of support structure protect the canopy during transport, storage, or use.

PLASTIC SLIDES

Telescopic legs PVC protected for less friction and fewer scratches when extended.

ROUNDED FLANGE FASTENERS

Flanges on fasteners rounded to prevent scratching when setting up or taking down shelter.

SECURE CANOPY

Hardware connects the roof to the aluminum frame and ensures that the canopy is situated correctly when opened.

HOOK AND LOOP VELCRO FASTENERS

Extra-wide hook and loop fastening strips enable canopy side walls to be attached and removed in seconds

PUSHBUTTON LATCH RELEASE

Latch release system to facilitate opening and closing of frame.

TENSIONER SEAL

PVC tensioners ensure canopy is properly stretched.

FRAME INDENTIFICATION

All parts of aluminum frame tagged with a part number. For ease of parts replacement.

100% STRUCTURAL ALUMINUM COMPONENTS

All connecting components made of 100% aluminum “alloy 6060T6”

311 Abbe Rd. Sheffield Lake, Ohio 44054 Phone: 440-949-2400 Fax: 440-949-2900 Email: sales@fsinorth.com

Visit us on the web at www.fsinorth.com

FSI® AL-SERIES

APPROX. WEIGHTS AND DIMENSIONS

55 mph wind resistance!* Roof load 2,200 lbs.—20 + lbs/sq ft.* GENERAL SPECIFICATIONS

Canopy: heavy duty 100% nylon twill (3/5) w. PU white pigment inner coating, ABT.0 23mm X 57/58. Wt. AB1.230GR/Sq. M - UV/chemical resistant/fire retardant - UV resistant and water repellent w. a hydrostatic resistance of 250 psi + - Mildew resistant to meet and exceed US Fed. Test MIL.STD.810E 508 - Fire resistance meets and exceeds CPAI 84 SECTION 5 1995, US Fed. Test CFR.1610, meets NFPA701 Flammability Test method 1 (2004), NFPA 702 w. ‘A’ burn scale rating. Inner Canopy: If applicable - of 100% NYLON 210T ANTRON W/R, POLYURETHANE COATED 57/58”, Color: White - Flame Retardant to meet “NFPA-701 TM-1; Anti-fungus/Anti-mildew, opaque

Floor: 1,000 denier Nylon coated w. PU, tensile strength: 2545N/2360, Tear Strength: 106/102N, weight: 490 g/yd. Frame/Hub: Patent pending 43mm cross section, 2mm thick, aluminum “ ALLOY 6060T6” high density ‘friction proof’ PVC corners, slides, and tensioners/seals, minimum tear strength of 215 Mps (31,200 psi).

Standard color is a blue color designated as FSI Blue® exterior. Green, White, and Tan/Sand exterior canopy color also available at no extra cost. Other colors available P.O.A.

All Shelters have full privacy zipper closure slip in and out dirty entry/clean exit doors, tie down ropes/guide straps, manual, shelter sleeve, stake kit, and a hammer. All canopy walls are attached to the frame. Units can attach to a second DAT AL® shelter. Simply unfold/pop up the unit and commence use in less than 5 minutes (size of shelter dependent).

All DAT® AL series™ shelters available with cross and center divider curtains, side doors, extra windows, skylights, HVAC/clothing ducts with ties, etc. as offered in published FSI price lists and at www.fsinorth.com Multiple optional accessories available inclusive of air heaters, air coolers, elevation grids, waste water pumps, etc. available.

*When properly staked or anchored to the ground. *This data is estimated based on material properties.

©Copyright 2015, All rights reserved. FSI® FSI North America®, Fire Safety International, Inc.®, DAT®, The color BLUE which FSI designates as FSI Blue®, FSI Holdings, LLC®, DAT®’QE Series’®, DAT®AL®, Transporter® are all registered trademarks of FSI®. All rights will be protected.

09/15V

FSI Part

Number DATAL55 DATAL510 DATAL100 DATAL1015 DATAL1020 DATAL1313 DATAL1320 DATAL1326 DATAL1717

Dimensions 5' X 5' 5' X 10' 10' X 10' 10' X 15' 10' X 20' 13' X 13' 13' X 20' 13' X 26' 17' X 17'

Head

Clearance 6'7"/200 cm 6'7"/200 cm 6'7"/200 cm 6'7"/200 cm 6'7"/200 cm 7'1"/215 cm 7'1"/215 cm 7'1"/215 cm 8'2"/248 cm

Peak Height 8'2"/248 cm 10'3"/312 cm 10'7"/322 cm 10'7"/322 cm 10'7"/322 cm 12'7"/383 cm 12'7"/383 cm 12'7"/383 cm 15'/457 cm

Packed

Dimensions

12" x 12" x 62" / 31cm x 31cm x

157cm

16" x 12" x 62" / 41cm x 31cm x

157cm

16" x 16" x 62" / 41cm x 41cm x

157cm

18" x 24" x 62" / 45cm x 61cm x

157cm

27" x 16" x 62" / 68cm x 41cm x

157cm

16" x 16" x 80" / 41cm x 41cm x

203cm

21" x 16" x 80" / 53cm x 41cm x

203cm

28" x 16" x 80" / 71cm x 41cm x

203cm

18" x 18" x 103" / 45cm x 45cm x

262cm

Weight 40 lbs / 18 kg 50 lbs / 23 kg 97 lbs / 44 kg 110 lbs / 50 kg 145 lbs / 66 kg 115 lbs / 52 kg 135 lbs / 61 kg 180 lbs / 82 kg 130 lbs / 59 kg

Windows (clear PVC w. Velcro

Full

Closure)

2 2 2 2 4 4 4 4 4

HVAC Ducts 2 2 2 2 2 2 2 2 2

Doors (Zipper

closure) 2 2 2 2 2 2 2 2 2