FS Schneidwerkzeuge GB - STIHL B.Net⌀350-3 40007134100 ⌀350-3 41107134100 ⌀270-2 40007133903 ... Not approved for FR 106, 108 Deflector for AUS, NZ see illustration marked "AUS,

Cutting Attachments, Parts andAccessories 2015-03

Contents

Cutting Attachments.........................................................................................................................................................................1. Mowing Heads 4.........................................................................................................................................................................2. Grass Cutting Blades 5.........................................................................................................................................................................3. Brush Knife 5-6.........................................................................................................................................................................4. Circular Saw Blades 6.........................................................................................................................................................................5. Shredder Blade 6

Reference Table for Current Models.........................................................................................................................................................................Cutting Attachments - Brushcutters 8-14

Cutting Attachments - Mounting.........................................................................................................................................................................FE 55 15.........................................................................................................................................................................FR 85, 85 T (a), 106, 108 16-18.........................................................................................................................................................................FR 85, 130 T, + FSB-KM (a) 19.........................................................................................................................................................................FR 130 T (a), 220, 350, 410, 450, 460, 480 20-22.........................................................................................................................................................................FS 25-4, 44, 55 (a), 55 T (b) 23-25.........................................................................................................................................................................FS 36, 40 (a), 72, 75 26.........................................................................................................................................................................FS 38, 40 (a), 45, 50 (a) 27.........................................................................................................................................................................FS 48, 50 (a), 51, 52, 56 (b), 62 28.........................................................................................................................................................................FS 55 (a), 56 (b), 70 29-30.........................................................................................................................................................................FS 65, 80 (a), 90 (a) 31-32.........................................................................................................................................................................FS 65-4, 80 (a), 85, 85 T (b), 87, 90 (c), 100 (d), 110 33-35.........................................................................................................................................................................FS 66, 74, 76, 81, 86 (a), 88, 106, 108 36-38.........................................................................................................................................................................FS 86 (a), 96 39-41.........................................................................................................................................................................FS 94 42-43.........................................................................................................................................................................FS 100 RX 44.........................................................................................................................................................................FS 120, 130, 200 (a), 240, 250, 260 R (b), 460 R (c) 45-47.........................................................................................................................................................................FS 150, 151, 200 (a), 202, 353, 410 (b) 48-49.........................................................................................................................................................................FS 160, 220, 280, 290, 300, 310, 350, 380, 400, 450, 480 50-53.........................................................................................................................................................................FS 160, 180, 220, 280, 300, 350, 400, 450 54-57.........................................................................................................................................................................FS 260 (a), 360 (b), 410 (b, c), 460 (a, c), 490 (c) 58-60.........................................................................................................................................................................FS 360 (a), 420 61-62.........................................................................................................................................................................FS 410 K (a, b), 460 K (b, c), 490 K (b) 63-64.........................................................................................................................................................................FS 500, 550 65-68.........................................................................................................................................................................FS 510, 560 69-70.........................................................................................................................................................................FSA 65, 85 71.........................................................................................................................................................................FSA 90 72.........................................................................................................................................................................FSE 31, 41 73.........................................................................................................................................................................FSE 52 74.........................................................................................................................................................................FSE 60, 71, 81 75.........................................................................................................................................................................FSE 65 76.........................................................................................................................................................................KA 85, 120, 250, KR 85 + FS (a) 77-78.........................................................................................................................................................................KM 55, 56, + FS-KM (a) 79-83.........................................................................................................................................................................KM 55, 56, + FSB-KM (a) 84.........................................................................................................................................................................KM 85, 90, 94, 100, 110, 130, + FS-KM (a) 85-90.........................................................................................................................................................................KM 85, 90, 94, 100, 110, + FSB-KM (a) 91.........................................................................................................................................................................MM 55 + FS-MM (a) 92

Spare Parts and Accessories.........................................................................................................................................................................Polymatic 30-2 93.........................................................................................................................................................................Polymatic 40-2 93.........................................................................................................................................................................TrimCut 30-2 94-95.........................................................................................................................................................................TrimCut 31-2 95-96.........................................................................................................................................................................TrimCut 40-2 97-98.........................................................................................................................................................................TrimCut 41-2 98-99.........................................................................................................................................................................TrimCut 50-2 100-101.........................................................................................................................................................................TrimCut 51-2 101-102.........................................................................................................................................................................AutoCut 2-2 103.........................................................................................................................................................................AutoCut C 4-2 103.........................................................................................................................................................................AutoCut 5-2 104.........................................................................................................................................................................AutoCut C 5-2 104.........................................................................................................................................................................AutoCut 10-2 105

1

Contents.........................................................................................................................................................................AutoCut 11-2 105-106.........................................................................................................................................................................AutoCut 20-2 106-107.........................................................................................................................................................................AutoCut 21-2 107-108.........................................................................................................................................................................AutoCut 25-2 108-109.........................................................................................................................................................................AutoCut C 25-2 110.........................................................................................................................................................................AutoCut 30-2 111.........................................................................................................................................................................AutoCut 40-2 112.........................................................................................................................................................................AutoCut 40-4 113.........................................................................................................................................................................STIHL SuperCut 10-1 114.........................................................................................................................................................................STIHL SuperCut 20-1 114.........................................................................................................................................................................STIHL SuperCut 20-2 115.........................................................................................................................................................................STIHL SuperCut 2-1 115-116.........................................................................................................................................................................STIHL SuperCut 2-2 116-117.........................................................................................................................................................................STIHL SuperCut 40-2 117-118.........................................................................................................................................................................STIHL PolyCut 5-3 118.........................................................................................................................................................................STIHL PolyCut 6-3 119.........................................................................................................................................................................STIHL PolyCut 10-3 119.........................................................................................................................................................................STIHL PolyCut 20-3 120.........................................................................................................................................................................STIHL PolyCut 40-3 120.........................................................................................................................................................................STIHL PolyCut 41-3 121.........................................................................................................................................................................STIHL DuroCut 5-2 121-122.........................................................................................................................................................................STIHL DuroCut 20-2 123-124.........................................................................................................................................................................STIHL DuroCut 40-4 124-125.........................................................................................................................................................................FixCut 5-2 126.........................................................................................................................................................................FixCut 25-2 126-127.........................................................................................................................................................................Round nylon line 128-129.........................................................................................................................................................................Round, quiet nylon line 129.........................................................................................................................................................................Square section nylon line 130.........................................................................................................................................................................Pentagonal nylon line 131.........................................................................................................................................................................Pre-cut round section nylon line 131.........................................................................................................................................................................Pre-cut pentagonal section nylon line 132.........................................................................................................................................................................Pre-cut Serrated Line 132.........................................................................................................................................................................Balancer, Sharpening Instructions and Sharpening Tools 133-136.........................................................................................................................................................................Transport guard for metal cutting blades 137-138

STIHL KombiSystem.........................................................................................................................................................................STIHL KombiSystem Attachments 140-141.........................................................................................................................................................................KombiTools for Models with Split Drive Tube 142-143

STIHL Tools and Attachments.........................................................................................................................................................................Gearbox attachments for STIHL Power Tools 144-146

STIHL MultiSystem.........................................................................................................................................................................MultiTools for STIHL MM 55 147-148

2

3

Cutting Attachments

1. Mowing Heads

STIHL SuperCut

Automatic nylon line head; no need for manual adjustment of line length. For lawnedging, trimming small areas of grass and around obstacles.

AutoCut

Semi-automatic nylon line head; "bump" line feed. For lawn edging, trimming smallareas of grass and around obstacles.

681K

T493 K

N

TrimCut

Manual nylon line head. For lawn edging, trimming small to medium-sized areas ofgrass and around obstacles.

STIHL PolyCut

Can be used with thermoplastic blades for higher cutting capacity. All-round tool forcutting weeds, trimming around obstacles and small fields. Can be equipped with nylonline for cutting grass.

68

1K

T8

32

KN

DuroCut

Uses precut lengths of nylon line. Each DuroCut version may be equipped withdifferent types and diameters of nylon line. For mowing low-growing grass and aroundsolid obstacles.

681K

T671 K

N

FixCut

Uses precut lengths of nylon line. For mowing lawn edges, small areas of grass andaround obstacles.

4

Cutting Attachments

2. Grass Cutting Blades

68

1K

T0

71

KN

Grass Cutting Blade with 2 Teeth

Robust; high cutting capacity, particularly in weeds and heavy growth; very goodacceleration.


Robust, for large areas, high cutting capacity in dense growth, such as grass andweeds.


Robust, suitable for clearing growth with low cutting resistance. High capacity in sparsegrowth as well as hard and dry grass, fern, stinging nettles and reed.

681K

T935 K

N

Special Grass Cutting Blade

Equipped with carbide-tipped teeth, very suitable for heavy-duty operating conditions.Long edge life. For mowing tough grass.

68

1K

T8

73

KN

Low Impact Grass Cutting Blade

Recommended in areas where there is a risk of damage to property from foreignobjects being caught and flung. For mowing grass.

3. Brush Knife

Brush Knife with 3 Teeth

For heavy-duty cutting and thinning thicket, scrub and bushes; also for cutting tough,matted grass. Can be equipped with special shredding deflector for shreddingapplications.

5

Cutting Attachments

3. Brush Knife

Special Brush Knife with 2 Teeth

Made of special wear resistant steel: For heavy-duty cutting and thinning thicket, scruband bushes; also for cutting tough, matted grass. Can be equipped with specialshredding deflector for shredding applications.

Special Brush Knife with 3 Teeth

For heavy-duty cutting and thinning thicket, scrub and bushes; also for cutting tough,matted grass. Can be equipped with special shredding deflector for shreddingapplications.

4. Circular Saw Blades

Chisel Tooth Circular Saw Blade

Same applications as scratcher blade, but produces smoother and softer cut.

Scratcher Tooth Circular Saw Blade

Used for cutting knotty bushes, brush, woody scrub, hedges and saplings, particularlygood cutting capacity.

Carbide Tipped Circular Saw Blade

Very good cutting capacity; also suitable for hedges.

5. Shredder Blade

681K

T932 K

N

Shredder Blade with 2 Teeth

Made of special wear resistant steel: Specially contoured blade combined withshredding deflector is ideal for shredding, thinning and clearing heavy growth, such aswild shrubs, hedges, etc.

6

7

Reference Table for Current Models Cutting Attachments - Brushcutters

FR13

0T

+FS

-KM

,FR

220

FR13

0T

+FS

B-KM

FR41

0,45

0,46

0,48

0

FS38

,40

➃,4

5,50

➃

FS55

,56

➃,7

0

FS55

R,5

6R

➃,7

0R

FS80

➄,8

5,87

,90

➅

FS80

R➄

,85

R,8

7R

➆,9

0R

➅

FS94

FS94

R

FS10

0,11

0

FS10

0R

,110

R➆

FS10

0R

X

FS12

0,25

0

FS13

0

FS13

0R

FS16

0,22

0,26

0

SuperCut 20-2 4002 710 2162 ● ● ● ● ● ● ● ● ● ● ● ● ● ●

SuperCut 40-2 4003 710 2140 ●

681K

T931 K

N

AutoCut 2-2 4008 710 2100

681K

T732 K

N

AutoCut C 4-2 4006 710 2121

AutoCut 5-2 4006 710 2100 ●

AutoCut C 5-2 4006 710 2105 ●

AutoCut 11-2 4004 710 2105 ●

AutoCut 25-2 4002 710 2108 ● ● ● ● ● ● ● ● ● ● ● ● ● ●

AutoCut C 25-2 4002 710 2137 ● ● ● ● ● ● ● ● ● ● ●

AutoCut 30-2 4002 710 2107 ● ● ● ●

AutoCut 40-2 4003 710 2125 ●

AutoCut 40-4 ➀ 4005 710 2100

TrimCut 31-2 4002 710 2152 ● ● ● ● ● ● ● ● ● ● ● ●

TrimCut 41-2 ➁ 4003 710 2104 ●

TrimCut 51-2 ➂ 4005 710 2103

PolyCut 5-3 4004 710 2131 ●

PolyCut 6-3 4006 710 2110 ●

PolyCut 20-3 4002 710 2130 ● ● ● ● ● ● ● ● ● ● ➊ ● ● ●

68

1K

T4

93

KN

8

Reference Table for Current ModelsCutting Attachments - Brushcutters

FS24

0

FS24

0R

,260

R,4

60R

FS25

0R

FS28

0,29

0,45

0,46

0,49

0

FS31

0

FS36

0➇

,400

,410

FS41

0K,

460

K,4

90K

FS51

0,56

0

FSA

65,8

5

FSA

90

FSA

90R

FSE

52

FSE

60,7

1,81

FT10

0

FT25

0

KA85

R+

FS

KM55

R+

FS-K

M

KM56

R+

FS-K

M

KM55

R,5

6R

,+FS

B-KM

KM85

R,9

0R

,94

R,1

00R

,110

R,+

FS-K

M

KM85

R,9

0R

,94

R,1

00R

,110

R,+

FSB-

KM

KM13

0+

FS-K

M

KM13

0R

+FS

-KM

MM

55+

FS-M

M

● ● ● ● ● ● ● ● ● ● ● ●

● ● ●

●

●

●

●

● ●

● ● ● ● ● ● ● ● ● ● ● ●

● ● ● ● ● ● ●

● ● ● ● ●

● ● ●

● ●

● ● ● ● ● ● ● ● ● ●

● ● ●

●

● ●

● ● ● ● ● ● ● ● ● ● ● ●

9


FR13

0T

+FS

-KM

,FR

220

FR13

0T

+FS

B-KM

FR41

0,45

0,46

0,48

0

FS38

,40

➃,4

5,50

➃

FS55

,56

➃,7

0

FS55

R,5

6R

➃,7

0R

FS80

➄,8

5,87

,90

➅

FS80

R➄

,85

R,8

7R

➆,9

0R

➅

FS94

FS94

R

FS10

0,11

0

FS10

0R

,110

R➆

FS10

0R

X

FS12

0,25

0

FS13

0

FS13

0R

FS16

0,22

0,26

0

68

1K

T7

41

KN

PolyCut 41-3 4003 710 2113 ●

681K

T831 K

N

DuroCut 5-2 4006 710 2125 ●

68

1K

T8

32

KN

DuroCut 20-2 4002 710 2167 ● ● ● ● ● ● ● ● ● ● ● ● ● ●

681K

T833 K

N

DuroCut 40-4 ➀ 4005 710 2106 ➋

FixCut 5-2 4006 710 2117 ●

FixCut 25-2 4002 710 2157 ● ● ● ● ● ● ● ● ● ● ●

681K

T071 K

N

⌀ 230-2 4001 713 3805 (●) (●) ● (●) ● (●) ● (●) ● (●) ● ● (●)

⌀ 230-4 4000 713 3801 ●

⌀ 230-4 4001 713 3801 (●) (●) ● (●) ● (●) ● (●) ● (●) ● ● (●)

⌀ 230-8 4001 713 3803 (●) (●) ● (●) ● (●) ● (●) ● (●) ● ● (●)

⌀ 255-8 4000 713 3802 ●

⌀ 250-40 4000 713 3806 ●

⌀ 250-40 4001 713 3806 (●) (●) ● (●) ● (●) ● ● (●)

⌀ 250-44 4000 713 3811 ●

⌀ 250-44 4001 713 3811 (●) (●) ● (●) ● (●) ● ● (●)

⌀ 305-2 4000 713 4103

68

1K

T8

73

KN

68

1K

T9

35

KN

681K

T671 K

N

10


FS24

0

FS24

0R

,260

R,4

60R

FS25

0R

FS28

0,29

0,45

0,46

0,49

0

FS31

0

FS36

0➇

,400

,410

FS41

0K,

460

K,4

90K

FS51

0,56

0

FSA

65,8

5

FSA

90

FSA

90R

FSE

52

FSE

60,7

1,81

FT10

0

FT25

0

KA85

R+

FS

KM55

R+

FS-K

M

KM56

R+

FS-K

M

KM55

R,5

6R

,+FS

B-KM

KM85

R,9

0R

,94

R,1

00R

,110

R,+

FS-K

M

KM85

R,9

0R

,94

R,1

00R

,110

R,+

FSB-

KM

KM13

0+

FS-K

M

KM13

0R

+FS

-KM

MM

55+

FS-M

M

● ● ● ●

● ● ● ● ● ● ● ● ● ● ●

➋ ● ● ●

● ● ● ●

● (●) ➌ ● (●) (●) (●) (●) (●) ● (●)

● ● ●

● (●) ➌ ● (●) (●) (●) (●) (●) ● (●)

● (●) ➌ ● (●) (●) (●) (●) (●) ● (●)

● ● ● ●

● ● ● ●

● (●) ➌ (●) (●) (●) ● (●)

● ● ● ● ●

● (●) ➌ (●) (●) (●) ● (●)

● ● ● ● ●

11


FR13

0T

+FS

-KM

,FR

220

FR13

0T

+FS

B-KM

FR41

0,45

0,46

0,48

0

FS38

,40

➃,4

5,50

➃

FS55

,56

➃,7

0

FS55

R,5

6R

➃,7

0R

FS80

➄,8

5,87

,90

➅

FS80

R➄

,85

R,8

7R

➆,9

0R

➅

FS94

FS94

R

FS10

0,11

0

FS10

0R

,110

R➆

FS10

0R

X

FS12

0,25

0

FS13

0

FS13

0R

FS16

0,22

0,26

0

⌀ 250-3 4112 713 4100 (●) (●) ● (●) ● (●) ● ● (●)

⌀ 300-3 4119 713 4100 ●

⌀ 350-3 4000 713 4100

⌀ 350-3 4110 713 4100

⌀ 270-2 4000 713 3903 ➋

⌀ 320-2 4000 713 3902

⌀ 200-44 4000 713 4200 ●

⌀ 200-80 4112 713 4201 ● ● ● ●

⌀ 225-48 4000 713 4205 ●

⌀ 250-50 4104 713 4200

⌀ 200-22 4112 713 4203 ● ● ● ●

⌀ 200-22 4119 713 4200 ●

⌀ 225-24 4000 713 4201 ●

⌀ 225-24 4110 713 4204 ●

68

1K

T9

35

KN

⌀ 225-36 4000 713 4211 ●

681K

T932 K

N

12


FS24

0

FS24

0R

,260

R,4

60R

FS25

0R

FS28

0,29

0,45

0,46

0,49

0

FS31

0

FS36

0➇

,400

,410

FS41

0K,

460

K,4

90K

FS51

0,56

0

FSA

65,8

5

FSA

90

FSA

90R

FSE

52

FSE

60,7

1,81

FT10

0

FT25

0

KA85

R+

FS

KM55

R+

FS-K

M

KM56

R+

FS-K

M

KM55

R,5

6R

,+FS

B-KM

KM85

R,9

0R

,94

R,1

00R

,110

R,+

FS-K

M

KM85

R,9

0R

,94

R,1

00R

,110

R,+

FSB-

KM

KM13

0+

FS-K

M

KM13

0R

+FS

-KM

MM

55+

FS-M

M

● (●) ➌ (●) (●) ● (●)

● ● ● ●

●

●

➋ ● ●

●

● ● ● ●

● ● ●

● ● ● ●

●

● ● ●

● ● ● ●

● ● ● ●

● ● ● ●

● ● ● ●

13


Note:See following pages for information oncutting attachments for older models.

Key to symbols:□ = including item No.● = approved(●) = approved only for loop handle (R) with

barrier bar and deflector— = not approved(A) = not illustrated(B) = option(C) = no longer available from factory(D) = not available as separate itemØ = diameter

Remarks:① for M12 and M14 threads② for M12 thread③ for M14 thread④ from 2008⑤ from 1996⑥ from 2006⑦ approvals for FS 85 RX and 110 RX see

page 34⑧ from 2010➊ see page 44➋ approved on FS 160, 220, 280 only with

series 4128 gearbox➌ not approved in EU, approved outside

the EU only for loop handle with barrierbar

14

Cutting Attachments - MountingFE 55

681K

T568 K

N

➀ Part is included with deflector

4803 713 4100

➂ 4803 710 8106➁ 4130 713 4501

➁ Not approved in EU

➃ 4004 710 4304➃ 4004 710 2105

Mowing headAutoCut 11-2

➃ Use quiet nylon line

➀ 4130 713 4100

➂ Part mandatory in EU

681K

T661 K

N

15

Cutting Attachments - Mounting FR 85, 85 T (a), 106, 108

681K

T854 K

N

➀ 4133 007 1007 ➊ 4119 710 8103

4002 710 2152Mowing headTrimCut 31-2

➌ 4119 710 6000➋ 4119 716 3203

➂ 4002 710 2130Mowing headPolyCut 20-3

➂ 4002 710 2167Mowing headDuroCut 20-2

➀ Approved in AUS, NZ only: 4133 007 1008

➁ 4133 713 4110

➁ Part is included with deflector

4002 710 2108Mowing headAutoCut 25-2

4002 710 2162Mowing headSuperCut 20-2

➊ + ➋ + ➌ = 4119 007 1027

➂ Not approved for FR 106, 108

68

1K

T8

56

KN

➊ 4119 710 8103

4130 713 16004126 713 1600

4126 642 7600

➌ 4119 710 6000

➀ 4133 007 1007


4001 713 2100 ➁Trimming head

4001 710 2101 ➁➄Mowing headFixCut 25-2

4002 710 2157 ➄Mowing headFixCut 25-2

➁ No longer available

➋ 4119 716 3203

➂ 4133 713 4110

➊ + ➋ + ➌ = 4119 007 1027➂ Part is included with deflector

4111 710 2100 ➁➃Mowing headPolyCut 40-3

➃ Not approved for FR 85, 85 T

➄ Not approved for FR 106, 108➅ For 4001 713 2100, 4001 710 2101, 4002 710 2157➆ For 4111 710 2100

➅➆

(a) + FS-KM

16

Cutting Attachments - MountingFR 85, 85 T (a), 106, 108

681K

T857 K

N

4001 713 3805 ➀➂Grass cutting blade

230-2 / 9''-2


230-4 / 9''-4

4001 713 3806 ➀➁➂Grass cutting blade

250-40 / 10''-40 Spezial


230-8 / 9''-8

4112 713 4100 ➀➂Brush knife

250-3 / 10''-3

➃ 4119 710 8103

4126 713 1600

4126 713 3100

4126 642 7600

4130 713 1600

➂ Barrier bar required on Series 4130 loop handle➁ Not approved for FR 106, 108 ➃ Deflector for AUS, NZ see illustration marked "AUS, NZ"➀ Transport guard required for metal cutting attachments

68

1K

T5

82

KN

4001 713 3805 ➀➁Grass cutting blade

230-2 / 9''-2


230-4 / 9''-4

4001 713 3806 ➀➁➃Grass cutting blade

250-40 / 10''-40 Spezial


230-8 / 9''-8

4126 713 1600

4126 713 3100

4126 642 7600

4130 713 1600

➁ Barrier bar required on loop handle➃ Not approved for FR 106, 108

➀ Transport guard required for metal cutting attachments

4133 007 1008

➂ 4133 713 4110

➂ Part is included with deflector

(a) + FS-KM

17

Cutting Attachments - Mounting FR 85, 85 T (a), 106, 108

68

1K

T8

58

KN

4112 713 4203 ➀➁➂➃Circular saw blade200-22, chisel tooth

4112 713 4201 ➀➁➂➃Circular saw blade

200-80, scratcher tooth

4126 713 1600 4130 713 1600

4126 713 3100

4126 642 7600

➊ 4117 710 8200

➂ Not approved for FR 85, FR 85 T➁ Barrier bar required on Series 4130 loop handle➀ Transport guard required for metal cutting attachments

➊ + Transport guard = 4126 007 1002➃ Approved only for limbing and lopping standing timber

681K

T661 K

N

(a) + FS-KM

18

Cutting Attachments - MountingFR 85, 130 T, + FSB-KM (a)

68

1K

T9

22

KN

4130 713 4501

4130 713 4100

4130 713 1501 ➀

4004 710 2131Mowing headPolyCut 5-3


➀ 9210 260 1400

➀ Part supplied with mowing head

681K

T661 K

N

(a) KombiTool

19

Cutting Attachments - Mounting FR 130 T (a), 220, 350, 410, 450, 460, 480

68

1K

T9

25

KN

➊ 4119 710 8103


➌ 4119 710 6000


➀ 4133 007 1007


4002 710 2167 ➂Mowing headDuroCut 20-2


➋ 4119 716 3203

➁ 4133 713 4110


➊ + ➋ + ➌ = 4119 007 1027➁ Part is included with deflector

➂ Part not available in Brazil

68

1K

T9

26

KN

➀ 4133 007 1007 ➊ 4119 710 8103

➌ 4119 710 6000➋ 4119 716 3203

4002 710 2122 ➂Mowing headTrimCut 30-2


➁ 4133 713 4110


4002 710 2137Mowing head

AutoCut C 25-2

➊ + ➋ + ➌ = 4119 007 1027 ➄ Part not available in Brazil

➂ No longer available➃ Not approved for FR 130 T

4002 710 2107 ➃➄Mowing headAutoCut 30-2

(a) + FS-KM

20

Cutting Attachments - MountingFR 130 T (a), 220, 350, 410, 450, 460, 480

681K

T911 K

N

➊ 4119 710 8103

4130 713 1600

4126 642 7600

➌ 4119 710 6000

➀ 4133 007 1007

4001 713 2100 ➁➃Trimming head


4001 710 2101 ➁➃Mowing headFixCut 25-2

4002 710 2157Mowing headFixCut 25-2


➋ 4119 716 3203

➂ 4133 713 4110

➊ + ➋ + ➌ = 4119 007 1027

➂ Part is included with deflector➃ Not approved for FR 410, 460

68

1K

T9

16

KN


230-2 / 9''-2


230-4 / 9''-4


250-40 / 10''-40 Spezial


230-8 / 9''-8

4112 713 4100 ➀➁Brush knife

250-3 / 10''-3

4119 710 8103

4126 713 3100

4126 642 7600

4130 713 1600

➁ Barrier bar required on loop handle➀ Transport guard required for metal cutting attachments

(a) + FS-KM

21

Cutting Attachments - Mounting FR 130 T (a), 220, 350, 410, 450, 460, 480

68

1K

T9

21

KN


230-2 / 9''-2


230-4 / 9''-4


250-40 / 10''-40 Spezial


230-8 / 9''-8

4126 713 3100

4126 642 7600

4130 713 1600


4133 007 1008

➂ 4133 713 4110


681K

T661 K

N

(a) + FS-KM

22

Cutting Attachments - MountingFS 25-4, 44, 55 (a), 55 T (b)

68

1K

T8

04

KN

➀ 4133 007 1007 ➊ 4119 710 8103

➌ 4119 710 6000➋ 4119 716 3203


FS 55➁ 4133 713 4110




AutoCut C 25-2

4002 710 2113 ➂Mowing headAutoCut 21-2



➊ + ➋ + ➌ = 4119 007 1027

➂ No longer available

68

1K

T8

47

KN

➀ 4133 007 1007 ➊ 4119 710 8103

➌ 4119 710 6000➋ 4119 716 3203

4112 713 8500 ➂

4126 713 1600

4130 713 1600


FS 55➁ 4133 713 4110



4002 710 2120 ➃Mowing head

Polymatic 30-2


➊ + ➋ + ➌ = 4119 007 1027

➂ Special accessory➃ No longer available

4002 710 2167Mowing headDuroCut 20-2

(a) up to 03/2014 (b) + FS-KM

23

Cutting Attachments - Mounting FS 25-4, 44, 55 (a), 55 T (b)

681K

T792 K

N

➊ 4119 710 8103

4130 713 1600 4126 713 1600

➌ 4119 710 6000

4130 713 1600

4126 642 7600

➀ 4133 007 1007



4001 710 2101 ➁Mowing headFixCut 25-2

FS 55



➋ 4119 716 3203

➂ 4133 713 4110

➊ + ➋ + ➌ = 4119 007 1027


681K

T510 K

N

4001 713 3804 ➀➂➄4001 713 3805 ➀➂Grass cutting blade


230-4 / 9''-4


230-8 / 9''-8

4112 713 4100 ➀➁➂Brush knife

250-3 / 10''-3

➃ 4119 710 8103

4126 713 1600

4126 713 3100

4126 642 7600

4130 713 1600

FS 55

➄ No longer available

➂ Barrier bar required on loop handle➁ Not approved for FS 44, 55, 55 T ➃ Deflector for AUS, NZ see illustration marked "AUS, NZ"➀ Transport guard required for metal cutting attachments

(a) up to 03/2014 (b) + FS-KM

24

Cutting Attachments - MountingFS 25-4, 44, 55 (a), 55 T (b)

68

1K

T8

62

KN


230-2 / 9''-2


230-4 / 9''-4


230-8 / 9''-8

4126 713 1600

4126 713 3100

4126 642 7600

4130 713 1600

FS 55


4133 007 1008

➂ 4133 713 4110


681K

T661 K

N

(a) up to 03/2014 (b) + FS-KM

25

Cutting Attachments - Mounting FS 36, 40 (a), 72, 75

681K

T567 K

N

4130 713 4501

4130 713 4100

4130 713 1501 ➂ 4130 713 1501

➀➁ 4004 710 2130Mowing headPolyCut 10-3



➂ 9210 260 1400

➀ Not approved for FS 36

➂ Part supplied with mowing head➁ No longer available

681K

T661 K

N

(a) up to 1999

26

Cutting Attachments - MountingFS 38, 40 (a), 45, 50 (a)

681K

T803 K

N

FS 38, 40

➀ 4130 713 4100

➃ 4140 713 1501

4006 713 6800 ➂

4006 713 6801 ➂

4130 713 1600 ➂

4006 710 2117➁ 4006 710 2109

Mowing headFixCut 5-2




4006 710 2105Mowing headAutoCut C 5-2

4140 710 8100

➀ Part is included with deflector➁ No longer available➂ Part supplied with mowing head

➃ Part supplied with PolyCut 6-3 and FixCut 5-2 mowing heads

681K

T848 K

N

FS 45, 50

➀ 4130 713 4100

➃ 4140 713 1501

4006 713 6800 ➂

4006 713 6801 ➂

4130 713 1600 ➂

4006 710 2117➁ 4006 710 2109

Mowing head




4006 710 2105Mowing headAutoCut C 5-2

4140 710 8101

➀ Part is included with deflector➁ No longer available➂ Part supplied with mowing head

➃ Part supplied with PolyCut 6-3 and FixCut 5-2 mowing heads

(a) from 2008

27

Cutting Attachments - Mounting FS 48, 50 (a), 51, 52, 56 (b), 62

68

1K

T9

50

KN


➀ 4002 710 2113Mowing headAutoCut 21-2

➀➃ 4002 710 2120Mowing head

Polymatic 30-2

➀ 4002 710 2122Mowing headTrimCut 30-2

➀ 4125 710 8120➀ 4125 713 4100

➁ 4112 713 8500

➀ 4112 713 1601

➁ 4125 713 6600 4125 713 6605

➀ No longer available➁ Special accessory

➂

➂ Only required for FS 50, 51

➃ Not approved for FS 48

681K

T661 K

N

(a) up to 1984 (b) up to 1995

28

Cutting Attachments - MountingFS 55 (a), 56 (b), 70

681K

T793 K

N

➀ 4133 713 4110





4144 710 81174144 710 8113 ➁


FS 55


681K

T849 K

N

➁ 4133 713 4110


AutoCut C 25-2

4002 710 2122 ➀Mowing headTrimCut 30-2



4144 710 81174144 710 8113 ➀


FS 55


(a) from 04/2014 (b) from 2008

29

Cutting Attachments - Mounting FS 55 (a), 56 (b), 70

681K

T794 K

N

➂ Transport guard required for metal cutting attachments

➀ No longer available

4144 710 81164144 710 8111 ➀

4001 713 3805 ➁➂Grass cutting blade

230-2 / 9''-2


230-4 / 9''-4


230-8 / 9''-8

4130 713 1600

4126 713 3100

4126 642 7600

➁ Barrier bar required on loop handle

FS 55

681K

T661 K

N

(a) from 04/2014 (b) from 2008

30

Cutting Attachments - MountingFS 65, 80 (a), 90 (a)

68

1K

T9

49

KN

➀➂ 4112 710 8101➁➂ 4114 710 8102

4112 713 8500 ➃

4112 713 1601 ➂4125 713 6600 ➃4125 713 6605 ➄

4002 710 2120 ➂Mowing head

Polymatic 30-2


➀ For FS 80, 90➁ For FS 65➂ No longer available

➃ Special accessory for Polymatic 30-2➄ Special accessory for TrimCut 30-2

68

1K

T5

15

KN

➂ 4112 713 1601

➂ 4112 713 3103

4112 641 3501

4001 713 3805 ➃➄Grass cutting blade

230-2 / 9''-2


230-4 / 9''-4


230-8 / 9''-8

4112 713 4100 ➃➄Brush knife

250-3 / 10''-3

➀➂ 4112 710 8101➁➂ 4114 710 8102

➀ For FS 80, 90 ➁ For FS 65 ➂ No longer available➃ Not approved on machines with loop handle➄ Transport guard required for metal cutting attachments

(a) up to 1986

31

Cutting Attachments - Mounting FS 65, 80 (a), 90 (a)

68

1K

T5

16

KN

➂ 4112 713 1601

4112 641 3501

➀ For FS 80, 90

➀➂ 4112 710 8101➊➁ 4117 710 8200

➁ For FS 65, 90 ➂ No longer available➃ Not approved on machines with loop handle➄ Transport guard required for metal cutting attachments in some countries

➃➄ 4112 713 4203Circular saw blade200-22, chisel tooth

➃➄ 4112 713 4201Circular saw blade


➊ + Transport guard = 4126 007 1002

68

1K

T5

17

KN

4600 710 1500 ➀➁➂Cultivator BC 30

➀ For FS 65, FS 80 from serial No. X 5 168 100, FS 90

➂ No longer available➁ Not approved on machines with loop handle

(a) up to 1986

32

Cutting Attachments - MountingFS 65-4, 80 (a), 85, 85 T (b), 87, 90 (c), 100 (d), 110

68

1K

T5

65

KN

➀ 4133 007 1007 ➊ 4119 710 8103

➌ 4119 710 6000


➋ 4119 716 3203




➁ 4133 713 4110




➊ + ➋ + ➌ = 4119 007 1027

68

1K

T8

50

KN

➀ 4133 007 1007 ➊ 4119 710 8103

➌ 4119 710 6000➋ 4119 716 3203

4002 710 2120 ➂Mowing head

Polymatic 30-2



4002 710 2140 ➂Mowing headSuperCut 2-2

➁ 4133 713 4110




AutoCut C 25-2

➊ + ➋ + ➌ = 4119 007 1027


4130 713 1600

➃ 4112 713 8500

4126 713 1600

➃ Special accessory

(a) from 1996 (b) +FS-KM (c) from 2006 (d) FS 100 RX: page 44

33

Cutting Attachments - Mounting FS 65-4, 80 (a), 85, 85 T (b), 87, 90 (c), 100 (d), 110

68

1K

T5

69

KN

➊ 4119 710 8103

➂ 4133 713 4110

4130 713 16004126 713 1600

4126 642 7600

➌ 4119 710 6000

➀ 4133 007 1007






➋ 4119 716 3203

➊ + ➋ + ➌ = 4119 007 1027


681K

T851 K

N

4001 713 3804 ➀➁➃➄4001 713 3805 ➀➁➂Grass cutting blade

230-2 / 9''-2


230-4 / 9''-4

4001 713 3806 ➀➁➂➃Grass cutting blade

250-40 / 10''-40 Spezial


230-8 / 9''-8

4112 713 4100 ➀➁➂Brush knife

250-3 / 10''-3

➅ 4119 710 8103

4126 713 1600

4126 713 3100

4126 642 7600

4130 713 1600

➄ No longer available➁ Barrier bar required on loop handle➂ Not approved for FS 85 RX, 100 RX, 110 RX➃ Not approved for FS 65-4 ➅ Deflector for AUS, NZ see illustration marked "AUS, NZ"



34

Cutting Attachments - MountingFS 65-4, 80 (a), 85, 85 T (b), 87, 90 (c), 100 (d), 110

68

1K

T8

63

KN

4001 713 3805 ➀➁➄Grass cutting blade

230-2 / 9''-2


230-4 / 9''-4


230-8 / 9''-8

4126 713 1600

4126 713 3100

4126 642 7600

4130 713 1600

➁ Barrier bar required on loop handle➄ Not approved for FS 85 RX, 100 RX, 110 RX

➃ Not approved for FS 65-4➀ Transport guard required for metal cutting attachments

4133 007 1008

➂ 4133 713 4110


4001 713 3806 ➀➁➃➄Grass cutting blade

250-40 / 10''-40 Spezial

681K

T570 K

N

4112 713 4203 ➀➁➂Circular saw blade200-22, chisel tooth

4112 713 4201 ➀➁➂Circular saw blade


4126 713 1600 4130 713 1600

4126 713 3100

4126 642 7600

➊ 4117 710 8200

➂ Not approved for FS 85 RX, 100 RX, 110 RX➁ Not approved on machines with loop handle➀ Transport guard required for metal cutting attachments



35

Cutting Attachments - Mounting FS 66, 74, 76, 81, 86 (a), 88, 106, 108

68

1K

T8

02

KN

➀ 4133 007 1007 ➊ 4119 710 8103

➌ 4119 710 6000➋ 4119 716 3203



➁ 4133 713 4110

4002 710 2113 ➂➃Mowing headAutoCut 21-2


➁ Part is included with deflector➊ + ➋ + ➌ = 4119 007 1027




➃ Not approved for FS 81, 86, 88, 106, 108

68

1K

T8

53

KN

➀ 4133 007 1007 ➊ 4119 710 8103

➌ 4119 710 6000➋ 4119 716 3203

4002 710 2120 ➂Mowing head

Polymatic 30-2



➁ 4133 713 4110

4002 710 2130 ➄Mowing headPolyCut 20-3

➁ Part is included with deflector➊ + ➋ + ➌ = 4119 007 1027➂ No longer available

4130 713 1600➃ 4112 713 8500

4126 713 1600


➄ Not approved for FS 86, 88, 106, 108

4002 710 2107 ➅Mowing headAutoCut 30-2

➅ Not approved for FS 66, 74, 76, 81

(a) from serial No. X 14 821 681

36

Cutting Attachments - MountingFS 66, 74, 76, 81, 86 (a), 88, 106, 108

68

1K

T5

19

KN

➊ 4119 710 8103

4130 713 16004126 713 1600

4126 642 7600

➌ 4119 710 6000

➀ 4133 007 1007




4002 710 2157 ➄Mowing headFixCut 25-2


➋ 4119 716 3203

➂ 4133 713 4110

➊ + ➋ + ➌ = 4119 007 1027


4111 710 2100 ➁➃Mowing headPolyCut 40-3

➃ Not approved for FS 66, 74, 76, 81➄ Not approved for FS 66, 81, 86, 88, 106, 108

68

1K

T5

20

KN


230-2 / 9''-2


230-4 / 9''-4


230-8 / 9''-8

4112 713 4100 ➀➁Brush knife

250-3 / 10''-3

➂ 4119 710 8103

4126 713 1600

4126 713 3100

4126 642 7600

4130 713 1600

➁ Barrier bar required on loop handle➂ Deflector for AUS, NZ see illustration marked "AUS, NZ"



37

Cutting Attachments - Mounting FS 66, 74, 76, 81, 86 (a), 88, 106, 108

68

1K

T8

64

KN


230-2 / 9''-2


230-4 / 9''-4


230-8 / 9''-8

4126 713 1600

4126 713 3100

4126 642 7600

4130 713 1600

➁ Barrier bar required on loop handle➀ Transport guard required for metal cutting attachments in some countries

4133 007 1008

➂ 4133 713 4110


681K

T521 K

N

4112 713 4203 ➀➁Circular saw blade200-22, chisel tooth

4112 713 4201 ➀➁Circular saw blade


4126 713 1600 4130 713 1600

4126 713 3100

4126 642 7600

➊ 4117 710 8200

➃ Not approved for FS 76, 81, 86, 88, 106, 108➂ Not approved for FS 66➁ Not approved on machines with loop handle➀ Transport guard required for metal cutting attachments


4600 710 1502 ➂➄Cultivator BC 35

4600 710 1500 ➃➄Cultivator BC 30

➄ No longer available


38

Cutting Attachments - MountingFS 86 (a), 96

681K

T951 K

N


➊ 4119 710 8103

4002 710 2120 ➀Mowing head

Polymatic 30-2

4002 710 2122 ➀Mowing headTrimCut 30-2

➌ 4119 710 6000


4133 007 1007 ➁

➋ 4119 716 3203➂ 4133 713 4110

4117 713 4500 ➀

4117 710 2900

➊ + ➋ + ➌ = 4119 007 1027

4117 716 3200 ➀

4112 713 8500 ➃4117 713 1600 ➀

4125 713 6600 ➃

4125 713 6605 ➃4125 713 6605 ➃

➀ No longer available➁ Approved in AUS, NZ only: 4133 007 1008➂ Part is included with deflector


681K

T523 K

N

➊ 4119 710 8103

➌ 4119 710 6000

4133 007 1007 ➁

➋ 4119 716 3203➂ 4133 713 4110

4117 713 4500 ➀

➊ + ➋ + ➌ = 4119 007 1027

4117 710 2900

➀ No longer available➁ Approved in AUS, NZ only: 4133 007 1008➂ Part is included with deflector

4111 710 2100 ➀Mowing headPolyCut 40-3

4001 713 2100 ➀Trimming head

➀ 4117 713 1600

4112 641 3501

➃ For 4001 713 2100➄ For 4111 710 2100

➃ ➄

(a) up to serial No. X 14 821 680

39

Cutting Attachments - Mounting FS 86 (a), 96

681K

T524 K

N

➃ 4119 710 8103

➁ Barrier bar required on loop handle➃ Deflector for AUS, NZ see illustration marked "AUS, NZ"


➂ 4117 713 4500

➂ 4117 713 1600

4112 641 3501

➂ 4112 713 3103


230-2 / 9''-2


230-4 / 9''-4


230-8 / 9''-8

4112 713 4100 ➀➁Brush knife

250-3 / 10''-3


68

1K

T5

35

KN


230-2 / 9''-2


230-4 / 9''-4


230-8 / 9''-8


4133 007 1008

➂ 4133 713 4110


➃ 4117 713 1600

4112 641 3501

➃ 4112 713 3103

➃ No longer available


40


681K

T525 K

N




➂ 4117 713 1600

➂ 4112 713 3103

➊ 4117 710 8200

➁ Not approved on machines with loop handle➀ Transport guard required for metal cutting attachments


4112 641 3501

4600 710 1500 ➂Cultivator BC 30


681K

T661 K

N


41

Cutting Attachments - Mounting FS 94

68

1K

T9

07

KN

➀ 4133 007 1007 ➊ 4119 710 8103

➌ 4119 710 6000➋ 4119 716 3203




➁ 4133 713 4110




➊ + ➋ + ➌ = 4119 007 1027

681K

T908 K

N


230-2 / 9''-2


230-4 / 9''-4


230-8 / 9''-8

➂ 4119 710 8103

4126 713 3100

4126 642 7600

4130 713 1600



42

Cutting Attachments - MountingFS 94

68

1K

T9

09

KN


230-2 / 9''-2


230-4 / 9''-4


230-8 / 9''-8

4126 713 3100

4126 642 7600

4130 713 1600


4133 007 1008

➂ 4133 713 4110


681K

T661 K

N

43

Cutting Attachments - Mounting FS 100 RX

68

1K

T5

86

KN

➀ 4133 713 4110

4180 710 8100


4002 710 2130 ➁Mowing headPolyCut 20-3




➁

➁ Only version with part No. "2149 A" is approved

681K

T861 K

N

➀ 4133 713 4110

4180 710 8100



AutoCut C 25-2


4002 710 2122 ➁Mowing headTrimCut 30-2



4001 710 9400 ➂➃

➁ No longer available➂ Special accessory

➃ Part supplied with mowing head

44

Cutting Attachments - MountingFS 120, 130, 200 (a), 240, 250, 260 R (b), 460 R (c)

68

1K

T7

97

KN

➀ 4133 007 1007 ➊ 4119 710 8103

➌ 4119 710 6000


➋ 4119 716 3203



➀ Approved in AUS, NZL only: 4133 007 1008

➁ 4133 713 4110




➊ + ➋ + ➌ = 4119 007 1027

68

1K

T8

52

KN

➀ 4133 007 1007 ➊ 4119 710 8103

➌ 4119 710 6000➋ 4119 716 3203




➁ 4133 713 4110


4002 710 2137 ➃Mowing head

AutoCut C 25-2

➊ + ➋ + ➌ = 4119 007 1027

➂ No longer available➃ Not approved for FS 120, 200, 250, 260 R, 460 R


(a) from 1997 (b) FS 260 with bike handle: page 58 (c) from 2010

45

Cutting Attachments - Mounting FS 120, 130, 200 (a), 240, 250, 260 R (b), 460 R (c)

681K

T572 K

N

➊ 4119 710 8103

4130 713 1600

4126 642 7600

➌ 4119 710 6000

➀ 4133 007 1007

4001 713 2100 ➁➃Trimming head


4001 710 2101 ➁➃Mowing headFixCut 25-2

4002 710 2157 ➃Mowing headFixCut 25-2


➋ 4119 716 3203

➂ 4133 713 4110

➊ + ➋ + ➌ = 4119 007 1027

➂ Part is included with deflector➃ Not approved for FS 240, 240 R, 260 R, 460 R

68

1K

T5

73

KN


230-2 / 9''-2


230-4 / 9''-4


250-40 / 10''-40 Spezial


230-8 / 9''-8

4112 713 4100 ➀➁➂Brush knife

250-3 / 10''-3

➃ 4119 710 8103

4126 713 3100

4126 642 7600

4130 713 1600

➁ Not approved for FS 200 R, 250 R in EU➂ Barrier bar required on loop handle

➃ Deflector for AUS, NZ see illustration marked "AUS, NZ"➀ Transport guard required for metal cutting attachments


46

Cutting Attachments - MountingFS 120, 130, 200 (a), 240, 250, 260 R (b), 460 R (c)

68

1K

T5

81

KN


230-2 / 9''-2


230-4 / 9''-4


250-40 / 10''-40 Spezial


230-8 / 9''-8

4126 713 3100

4126 642 7600

4130 713 1600


4133 007 1008

➂ 4133 713 4110


681K

T574 K

N




4130 713 1600

4126 713 3100

4126 642 7600

➊ 4117 710 8200




47

Cutting Attachments - Mounting FS 150, 151, 200 (a), 202, 353, 410 (b)

681K

T527 K

N

4116 007 1007 ➁

4110 713 8500 ➁

4110 713 1600 ➁

➁ 4110 713 16009214 320 1470

4003 710 2100 ➁Mowing head

Polymatic 40-2




25 mm

➀

➀ For TrimCut 40-2, TrimCut 41-2➁ No longer available

➁ 4110 710 7001

681K

T866 K

N

4116 007 1007 ➀

➀ 4110 713 1600

9214 320 1470

60 mm

➀ 4110 710 7001

4126 713 3100

4110 713 4100 ➁Brush knife

350-3 / 14''-3

➀ No longer available➁ Transport guard required for metal cutting attachments

(a) up to 1988 (b) up to 1986

48

Cutting Attachments - MountingFS 150, 151, 200 (a), 202, 353, 410 (b)

68

1K

T5

28

KN

➀ 4110 713 1600 ➀ 4110 713 1600

9214 320 1470 9214 320 1470

➊ 4116 710 8201➀ 4116 710 8200

➋ 4116 710 8206➀ 4116 710 8205

➀ No longer available➁ Transport guard required for metal cutting attachments

4104 713 4200 ➁Circular saw blade




4110 713 4204 ➁Circular saw blade225-24, chisel tooth


➋ + Transport guard = 4116 710 1018

681K

T661 K

N

(a) up to 1988 (b) up to 1986

49

Cutting Attachments - Mounting FS 160, 220, 280, 290, 300, 310, 350, 380, 400, 450, 480

68

1K

T5

75

KN

4128➀ 4133 007 1007

➊ 4119 710 8103

➁ 4133 713 4110

➋ 4119 716 3203

➌ 4119 710 6000

A 4128 717 2701B 4128 717 2704

4128 710 3800

4119 717 2800






➂ 4005 710 2100Mowing headAutoCut 40-4

➊ + ➋ + ➌ = 4119 007 1027

➂ Not approved for FS 160, 220, 300, 310, 350, 400

68

1K

T8

67

KN

4128➀ 4133 007 1007

➊ 4119 710 8103

➁ 4133 713 4110

➋ 4119 716 3203

➌ 4119 710 6000

A 4128 717 2701B 4128 717 2704

4128 710 3800

4119 717 2800



➁ Part is included with deflector➊ + ➋ + ➌ = 4119 007 1027




50

Cutting Attachments - MountingFS 160, 220, 280, 290, 300, 310, 350, 380, 400, 450, 480

4128

68

1K

T8

07

KN

➊ 4119 710 8103

➋ 4119 716 3203

A 4128 717 2701B 4128 717 2704

4128 710 3800

4119 717 2800

➊ + ➋ = 4119 007 1027

4111 710 2100 ➀Mowing head

4128 713 16004119 642 7600


4128

681K

T576 K

N

4119 710 8103 ➀

A 4128 717 2701B 4128 717 2704

4128 710 3800

4119 717 2800

4128 713 1600

4119 713 3100

4119 642 7600


250-40 / 10''-40 Spezial

➁ Not approved on machines with loop handle

4000 713 4103 ➁➂Brush knife

305-2 / 12''-2 Spezial

4119 713 4100 ➁➂Brush knife

300-3 / 12''-3

➀ Deflector for AUS, NZ see illustration marked "AUS, NZ"


255-8 / 10''-8



230-4 / 9''-4

51

Cutting Attachments - Mounting FS 160, 220, 280, 290, 300, 310, 350, 380, 400, 450, 480

68

1K

T8

65

KN

4128

A 4128 717 2701B 4128 717 2704

4128 710 3800

4119 717 2800

4128 713 1600

4119 713 3100

4119 642 7600



250-40 / 10''-40 Spezial


255-8 / 10''-8


230-4 / 9''-4


4133 007 1008

➀ 4133 713 4110


68

1K

T5

77

KN

4128

A 4128 717 2706B 4128 717 2707

4128 710 3800

4128 713 1600

4116 713 3100

4119 642 7600


➊ 4117 710 8200






52

Cutting Attachments - MountingFS 160, 220, 280, 290, 300, 310, 350, 380, 400, 450, 480

68

1K

T8

68

KN

4128

A 4128 717 2706B 4128 717 2707

4128 710 3800

4128 713 1600

4116 713 3100

4119 642 7600


➊ 4000 713 3300








225-36, carbide

➂ Not approved for FS 310

68

1K

T5

78

KN

4128

A 4128 717 2701B 4128 717 2704

4128 710 3800

4119 717 2800

4128 713 1600

4116 713 3100

4119 642 7600

➁ Not approved on machines with loop handle➂ Transport guard required for metal cutting attachments

4000 713 3903 ➁➂➃➋Shredder blade270-2 / 10.6''-2

4116 717 2700 ➀4116 717 2702 ➌

4128 710 8100 ➀➊4128 713 4500 ➀


4600 710 1501 ➀➁Cultivator BC 40

➃ Approved for FS 160 from serial No. 3 50 609 048

➊ + ➌ = 4128 007 1007➊ + ➋ + ➌ = 4128 007 1008

53

Cutting Attachments - Mounting FS 160, 180, 220, 280, 300, 350, 400, 450

68

1K

T5

29

KN

4119➊ 4119 710 8103

➋ 4119 716 3203

➌ 4119 710 6000







➊ + ➋ + ➌ = 4119 007 1027➂ Not approved for FS 160, 180, 220, 300, 350, 400

➀ 4133 007 1007

➁ 4133 713 4110

➍➃ 4119 717 2806

➃ 4119 717 3100

4116 710 3800

➎ 4119 717 2800

➃ Only for gearhead with screw-fitted guard ring

➍ + ➎ = 4119 007 1021

68

1K

T8

69

KN

4119➀ 4133 007 1007➊ 4119 710 8103

➁ 4133 713 4110➋ 4119 716 3203

➌ 4119 710 6000



➁ Part is included with deflector ➊ + ➋ + ➌ = 4119 007 1027➂ No longer available


➍➃ 4119 717 2806

➃ 4119 717 3100

4116 710 3800

➎ 4119 717 2800


➍ + ➎ = 4119 007 1021

54

Cutting Attachments - MountingFS 160, 180, 220, 280, 300, 350, 400, 450

4119

68

1K

T5

12

KN

➊ 4119 710 8103

➋ 4119 716 3203

➊ + ➋ = 4119 007 1027

➌➀ 4119 717 2806

➀ 4119 717 3100

4116 710 3800

➍ 4119 717 2800

➀ Only for gearhead with screw-fitted guard ring

4116 713 16004119 642 7600

➌ + ➍ = 4119 007 1021



68

1K

T5

30

KN

4119

4119 710 8103 ➀

4116 713 16004119 713 3100

4119 642 7600


4000 713 3806 ➁➂➄Grass cutting blade

250-40 / 10''-40 Spezial

4000 713 4103 ➁➂➄Brush knife

305-2 / 12''-2 Spezial

4119 713 4100 ➁➂Brush knife

300-3 / 12''-3

➀ Deflector for AUS, NZ see illustration marked "AUS, NZ"


255-8 / 10''-8



230-4 / 9''-4

➊➃ 4119 717 2806

➃ 4119 717 3100

4116 710 3800

➋ 4119 717 2800


➊ + ➋ = 4119 007 1021➄ Not approved for FS 180

55

Cutting Attachments - Mounting FS 160, 180, 220, 280, 300, 350, 400, 450

681K

T583 K

N

4119

4116 713 1600

4119 713 3100

4119 642 7600


250-40 / 10''-40 Spezial



255-8 / 10''-8


230-4 / 9''-4


➀ 4133 713 4110


➊➃ 4119 717 2806

➃ 4119 717 3100

4116 710 3800

➋ 4119 717 2800


➊ + ➋ = 4119 007 1021

4133 007 1008

4119

68

1K

T5

31

KN

4116 713 1600

4116 713 3100

4119 642 7600

➊ 4117 710 8200







4119 717 2807

4119 717 3100

4116 710 3800

56

Cutting Attachments - MountingFS 160, 180, 220, 280, 300, 350, 400, 450

68

1K

T8

70

KN

4119

4116 713 1600

4116 713 3100

4119 642 7600

➊ 4000 713 3300



4119 717 2807

➂ Not approved for FS 300, 350

4119 717 3100



4116 710 3800




225-36, carbide

➃ Approved in Brazil from 2014

681K

T661 K

N

57

Cutting Attachments - Mounting FS 260 (a), 360 (b), 410 (b, c), 460 (a, c), 490 (c)

68

1K

T8

08

KN

4128 717 2704

4147 710 3800

4119 717 2800

4133 713 4110 ➀



➁ 4005 710 2100Mowing headAutoCut 40-4

4147 710 8100

➀ Part is included with deflector➁ Not approved for FS 260, 360, 410

68

1K

T8

71

KN

4128 717 2704

4147 710 3800

4119 717 2800

4133 713 4110 ➀


4147 710 8100




(a) FS 260 R, 460 R: Seite 45 (b) ab 2010 (c) FS 410 K, 460 K, 490 K: page 63

58

Cutting Attachments - MountingFS 260 (a), 360 (b), 410 (b, c), 460 (a, c), 490 (c)

681K

T809 K

N

4128 717 2704

4147 710 3800

4119 717 2800

4119 713 3100

➋ 4119 642 7600

➀ Not approved on machines with loop handle


250-40 / 10''-40 Spezial

4000 713 4103 ➀➁Brush knife

305-2 / 12''-2 Spezial

4119 713 4100 ➀➁Brush knife

300-3 / 12''-3


255-8 / 10''-8


230-4 / 9''-4

➁ Transport guard required for metal cutting attachments

4147 710 8101

➊ 4128 713 1600

➊ + ➋ = 4147 007 1014

68

1K

T8

10

KN

➊ 4147 710 8200

➋ 4147 717 2701

4147 710 3800

➌ 4128 713 1600

4116 713 3100

➍ 4119 642 7600

➀➁ 4119 713 4200Circular saw blade200-22, chisel tooth

➀➁ 4000 713 4200Circular saw blade


➀ Not approved on machines with loop handle➁ Transport guard required for metal cutting attachments➊ + ➋ + Transport guard = 4147 007 1008 ➌ + ➍ = 4147 007 1014


59

Cutting Attachments - Mounting FS 260 (a), 360 (b), 410 (b, c), 460 (a, c), 490 (c)

68

1K

T8

72

KN

➊ 4147 710 8200

➋ 4147 717 2701

4147 710 3800

➌ 4128 713 1600

4116 713 3100

➍ 4119 642 7600

➀ Not approved on machines with loop handle➁ Transport guard required for metal cutting attachments➊ + ➋ + Transport guard = 4147 007 1009






225-36, carbide

➌ + ➍ = 4147 007 1014

68

1K

T8

11

KN

4128 717 2704

4147 710 3800

4119 717 2800

➍ 4116 717 2702

➎ 4119 642 7600

➌ 4128 713 1600

4000 713 3903 ➋Shredder blade270-2 / 10.6''-2

➊ 4147 710 8102

➊ + ➋ + ➍ = 4147 007 1011➌ + ➎ = 4147 007 1014


60


681K

T533 K

N

25 mm

4110 710 7001 ➀

➀ 4116 713 4501➊ 4116 710 8101

➋ 4119 716 3203

➌ 4119 710 6000

4116 710 380060 mm ➁

➀ 4116 007 10074116 007 1023

4003 710 2113 (M12, M14)Mowing headPolyCut 41-3

4005 710 2103 (M14) ➂➄Mowing headTrimCut 51-2

4005 710 2100 (M12, M14) ➄Mowing headAutoCut 40-4

➀ No longer available➁ Diameter

M12 / M14

M12 / M14

4005 710 2110 (M14) ➀➃➄Mowing headTrimCut 50-2

➃ For M12: 4003 710 2101 TrimCut 40-2➄ Use quiet nylon line in EU

➂ For M12: 4003 710 2104 TrimCut 41-2 ➊ + ➋ + ➌ = 4116 007 1016

4116 710 381065 mm ➁

68

1K

T8

14

KN

25 mm➀ 4110 710 7001

➀ 4116 713 4501➊ 4116 710 8101

M12 / M14 M12 / M14

4116 710 3810 / 65 mm ➁ 4116 710 3800 / 60 mm ➁

4119 642 7600 (M12) 4116 642 7601 (M14)

4116 007 1007 ➀4116 007 1023

➋ 4119 716 3203

4116 713 1600 / 60 mm ➁

4111 710 2100 ➀Mowing headPolyCut 40-3

➀ No longer available➁ Diameter➊ + ➋ = 4116 007 1016

(a) up to 1987

61

Cutting Attachments - Mounting FS 360 (a), 420

68

1K

T5

34

KN

60 mm

M12 / M14 M12 / M14

➀ 4110 710 70014116 710 8101

4116 713 1600 / 60 mm ➁

4116 710 3800 / 60 mm ➁

4116 007 1007 ➀4116 007 1023

4000 713 3802 ➂Grass cutting blade255-8 / 10''-8

➂ 4110 713 4100Brush knife

350-3 / 14''-3

4119 642 7600 (M12) 4116 642 7601 (M14)

4119 713 3100

➃ 4116 717 2700 4116 717 2702


4116 710 3810 / 65 mm ➁

4116 710 3800 / 60 mm ➁

4116 713 1600 / 60 mm ➁

4116 713 1601 / 70 mm ➁

➀ No longer available➁ Diameter

681K

T815 K

N

➊ 4116 710 8201 ➋ 4116 710 8206

➀ 4104 713 4200Circular saw blade


➀ 4000 713 4201➀ 4110 713 4204Circular saw blade225-24, chisel tooth



4116 713 1600 / 60 mm ➁

➌ 4116 713 3100

4119 642 7600 (M12)4116 642 7601 (M14)

4116 717 2702

M12 / M14 M12 / M14


225-36, carbide

➊ + ➌ + Transport guard = 4116 007 1019➋ + ➌ + Transport guard = 4116 007 1018➀ Transport guard required for metal cutting attachments

➁ Diameter

(a) up to 1987

62

Cutting Attachments - MountingFS 410 K (a, b), 460 K (b, c), 490 K (b)

68

1K

T8

13

KN

4147 710 8106

4128 717 2704

4147 710 3800

4119 717 2800

4128 713 1600

4119 713 31004119 642 7600

4119 713 4100 ➀Brush knife300-3 / 12''-3

➀ 4000 713 4103Brush knife

305-2 / 12''-2 Spezial


68

1K

T5

13

KN

➀ 4119 713 4200Circular saw blade200-22, chisel tooth



4147 710 8210

4147 717 2701

4147 710 3800

4128 713 1600

4116 713 3100

4119 642 7600


(a) ab 2010 (b) FS 410, 460, 490: Seite 58 (c) FS 460 R: page 45

63

Cutting Attachments - Mounting FS 410 K (a, b), 460 K (b, c), 490 K (b)

68

1K

T9

02

KN

4147 710 8211

4147 717 2701

4147 710 3800

4128 713 1600

4116 713 3100

4119 642 7600






225-36, carbide


681K

T661 K

N

(a) ab 2010 (b) FS 410, 460, 490: Seite 58 (c) FS 460 R: page 45

64

Cutting Attachments - MountingFS 500, 550

68

1K

T5

66

KN

37,5 mm

A 2,5 mmB 3,8 mm

4116 713 4502 ➊4116 710 8102 ➊

4119 710 6000 ➌

4116 710 381065 mm ➀

4116 710 380060 mm ➀

A ➁ 4116 007 1007A, B 4116 007 1023

4003 710 2113 (M12 / M14)Mowing headPolyCut 41-3

4119 716 3203 ➋

4005 710 2103 (M14) ➂Mowing headTrimCut 51-2

4003 710 2120 (M12) ➁➂4005 710 2100 (M12 / M14) ➂

Mowing headAutoCut 40-4

➂ Use quiet nylon line in EU

4005 710 2110 (M14) ➁➂Mowing headTrimCut 50-2

➀ Diameter➁ No longer available➊ + ➋ + ➌ = 4116 007 1020

M12 / 14

68

1K

T8

16

KN

37,5 mm

A 2,5 mmB 3,8 mm

4116 713 4502 ➊4116 710 8102 ➊

4119 710 6000 ➌

4116 710 381065 mm ➀

4116 710 380060 mm ➀

4119 642 7600 (M12)4116 642 7601 (M14)

A ➁ 4116 007 1007A, B 4116 007 1023

4119 716 3203 ➋

4116 713 160060 mm ➀


➄ Use quiet nylon line in EU

➂ ➃

4005 710 2106 ➄Mowing headDuroCut 40-4


➂ For DuroCut 40-4➃ For PolyCut 40-3

M12 / 14

65

Cutting Attachments - Mounting FS 500, 550

681K

T817 K

N

35,5 mm

A 2,5 mmB 3,8 mm

4116 713 4501 ➊4116 710 8101 ➊

4119 710 6000 ➌

4003 710 2113 (M12 / M14)Mowing headPolyCut 41-3

4116 710 381065 mm ➀

4116 710 380060 mm ➀

4005 710 2103 (M14) ➂➄Mowing headTrimCut 51-2

4005 710 2100 (M12 / M14) ➄Mowing headAutoCut 40-4

A ➁ 4116 007 1007 A, B 4116 007 1023

4119 716 3203 ➋

4005 710 2110 (M14) ➁➃➄Mowing headTrimCut 50-2

➃ For M12: 4003 710 2101 TrimCut 40-2➄ Use quiet nylon line in EU

➂ For M12: 4003 710 2104 TrimCut 41-2

➀ Diameter➁ No longer available

➊ + ➋ + ➌ = 4116 710 1016

M12 / 14

68

1K

T8

18

KN

35,5 mm

A 2,5 mmB 3,8 mm

4116 713 4501 ➊4116 710 8101 ➊

4119 710 6000 ➌

4116 710 381065 mm ➀

4116 710 380060 mm ➀

4119 642 7600 (M12)4116 642 7601 (M14)

A ➁ 4116 007 1007A, B 4116 007 1023

4119 716 3203 ➋

4116 713 160060 mm ➀


➄ Use quiet nylon line in EU

➂ ➃

4005 710 2106 ➄Mowing headDuroCut 40-4


➂ For DuroCut 40-4➃ For PolyCut 40-3

M12 / 14

66


68

1K

T9

03

KN

35,5 mm 37,5 mm

A 2,5 mmB 3,8 mm

M12 / 14

4116 713 45024116 710 8102

4116 713 45014116 710 8101

4116 710 380060 mm ➀

4116 713 1600 / 60 mm ➀

4116 007 1007 A ➁4116 007 1023 A, B

4000 713 3806 ➂Grass cutting blade

250-40 / 10''-40 Spezial

➂ 4000 713 3802Grass cutting blade

255-8 / 10''-8

4119 642 7600 (M12) 4116 642 7601 (M14)

4119 713 3100



68

1K

T5

79

KN

35,5 mm 37,5 mm

A 2,5 mmB 3,8 mm

M12 / M14

4116 713 45024116 710 8102

4116 713 45014116 710 8101

4000 713 3802 ➂Grass cutting blade

255-8 / 10''-8

➂ 4110 713 4100Brush knife

350-3 / 14''-3

4119 642 7600 (M12) 4116 642 7601 (M14)

➁ 4116 717 2700 4116 717 2702


4116 710 3800 / 60 mm ➀


4116 710 3810 / 65 mm ➀

4116 713 1601 / 70 mm ➀4116 713 1600 / 60 mm ➀

67


681K

T819 K

N

➊ 4116 710 8201M12 / 14

➋ 4116 710 8206M12 / 14

4104 713 4200 ➀Circular saw blade


4000 713 4201 ➀4110 713 4204 ➀Circular saw blade225-24, chisel tooth



4116 713 1600 / 60 mm ➁

➌ 4116 713 3100

4119 642 7600 (M12)4116 642 7601 (M14)

4116 717 2700 ➂4116 717 2702


225-36, carbide

➊ + ➌ + Transport guard = 4116 007 1019➋ + ➌ + Transport guard = 4116 007 1018➀ Transport guard required for metal cutting attachments

➁ Diameter➂ No longer available

681K

T580 K

N

4116 710 8103

M12 / 14

4116 717 2702

4000 713 3902 ➁Shredder blade320-2 / 12.6''-2

➀ Diameter➁ Transport guard required for metal cutting attachments

4116 713 1601 / 70 mm ➀

4116 710 3810 / 65 mm ➀

4119 642 7600 (M12)4116 642 7601 (M14)

68


68

1K

T8

20

KN

➊ 4147 710 81004133 713 4110 ➀

4116 710 381065 mm ➁

➋ 4116 710 380060 mm ➁

➌ 4148 007 1028





➀ Part is included with deflector➁ Diameter➊ + ➋ + ➌ = 4148 007 1027

68

1K

T8

21

KN

➋ 4116 710 380060 mm ➀

4148 007 1028 ➌

➊ 4148 710 8101

➁ 4000 713 3802Grass cutting blade

255-8 / 10''-8

4000 713 3806 ➁Grass cutting blade

250-40 / 10''-40 Spezial

4116 642 7601

4119 713 3100 ➍

4116 713 1600 / 60 mm ➀

➀ Diameter

➊ + ➋ + ➌ + ➍ = 4148 007 1024➁ Transport guard required for metal cutting attachments

69


68

1K

T9

06

KN

4116 710 3810 / 65 mm ➀

4148 710 8101

➁ 4000 713 4100Brush knife

350-3 / 14''-3 DuroSpezial➁ 4110 713 4100

Brush knife350-3 / 14''-3

4116 642 7601

4116 717 2702

4116 713 1601 / 70 mm ➀

4000 713 4103 ➁Brush knife

305-2 / 12''-2 Spezial

➀ Diameter➁ Transport guard required for metal cutting attachments

68

1K

T8

22

KN




➌ 4116 713 1600 / 60 mm ➀

➍ 4116 713 3100

➎ 4116 642 7601

➊ 4148 710 8201

➋ 4116 710 3810 / 65 mm ➀



225-36, carbide

➁ Transport guard required for metal cutting attachments➀ Diameter

➊ + ➋ + ➌ + ➍ + ➎ + Transport guard = 4148 007 1022

70

Cutting Attachments - MountingFSA 65, 85

681K

T806 K

N

➀ For FSA 65➁ For FSA 85

➀ 4852 710 8100➁ 4852 710 8101

➂ 4852 710 8101

4006 710 2121Mowing head AutoCut C 4-2


681K

T661 K

N

71

Cutting Attachments - Mounting FSA 90

68

1K

T9

88

KN




4863 710 8120➀ 4133 713 4110


68

1K

T9

89

KN

➀➁ 4001 713 3812Grass cutting blade

260-2 / 9''-2


230-4 / 9''-4


230-8 / 9''-8

4863 710 8100

4130 713 1600

4126 713 3100

4126 642 7600


230-2 / 9''-2

➀ Barrier bar required on loop handle➁ Transport guard required for metal cutting attachments

72

Cutting Attachments - MountingFSE 31, 41

681K

T791 K

N

➀ 4815 710 8101 ➁ 4815 710 8102

➀ 6421 710 4300 ➁ 6235 710 4305

➀ For FSE 31➁ For FSE 41

FSE 31 FSE 41

681K

T661 K

N

73

Cutting Attachments - Mounting FSE 52

681K

T796 K

N

4816 710 8100

➀ 4130 713 4100

9455 621 0570

4008 710 2100Mowing head AutoCut 2-2


681K

T661 K

N

74

Cutting Attachments - MountingFSE 60, 71, 81

681K

T859 K

N

4809 710 8100➀ 4809 710 8101


➁ 4130 713 4100


➂ 4006 710 2105Mowing headAutoCut C 5-2


➂ Use quiet nylon line

681K

T661 K

N

75

Cutting Attachments - Mounting FSE 65

68

1K

T5

84

KN

➊ 4119 710 8103

➋ 4119 716 3203

➌ 4119 710 6000


➊ + ➋ + ➌ = 4119 007 1027

68

1K

T5

85

KN

4001 713 3805 ➀Grass cutting blade

230-2 / 9''-2

4130 713 1600

4126 713 3100

4126 642 7600

4119 710 8103


76

Cutting Attachments - MountingKA 85, 120, 250, KR 85 + FS (a)

68

1K

T9

99

KN

4133 007 1007➊ 4119 710 8103


➌ 4119 710 6000➋ 4119 716 3203


➀ 4133 713 4110




➊ + ➋ + ➌ = 4119 007 1027

4002 710 2107 ➁Mowing headAutoCut 30-2

➁ Not approved for KA 85, KR 85

68

1K

T1

00

0 K

N

➊ 4119 710 8103

4130 713 1600

4126 642 7600

➌ 4119 710 6000

4133 007 1007



4002 710 2157 ➂Mowing headFixCut 25-2


AutoCut C 25-2


➋ 4119 716 3203

➀ 4133 713 4110

➊ + ➋ + ➌ = 4119 007 1027➀ Part is included with deflector


(a) Interchangeable attachment

77

Cutting Attachments - Mounting KA 85, 120, 250, KR 85 + FS (a)

68

1K

T1

00

1 K

N


230-2 / 9''-2


230-4 / 9''-4


250-40 / 10''-40 Spezial


230-8 / 9''-8

4112 713 4100 ➀➁Brush knife

250-3 / 10''-3

4119 710 8103

4126 713 3100

4126 642 7600

4130 713 1600



68

1K

T1

00

2 K

N




4130 713 1600

4126 713 3100

4126 642 7600

➊ 4117 710 8200


➊ + Transportschutz = 4126 007 1002

(a) Interchangeable attachment

78

Cutting Attachments - MountingKM 55, 56, + FS-KM (a)

681K

T990 K

N

41804180 007 1030 ➊ 4180 710 8106

➌ 4180 713 4110➋ 4180 716 3200



4133 713 4110 ➀




➊ + ➋ + ➌ = 4180 007 1028

681K

T991 K

N

41804180 007 1030 ➊ 4180 710 8106

➌ 4180 713 4110➋ 4180 716 3200


4002 710 2113 ➁Mowing headAutoCut 21-2

4133 713 4110 ➀



AutoCut C 25-2

➊ + ➋ + ➌ = 4180 007 1028➁ No longer available


(a) KombiTool

79

Cutting Attachments - Mounting KM 55, 56, + FS-KM (a)

681K

T992 K

N

41804180 007 1030

4130 713 1600

➊ 4180 710 8106

➌ 4180 713 4110➋ 4180 716 3200

4126 642 7600



4133 713 4110 ➀


➁ No longer available➊ + ➋ + ➌ = 4180 007 1028


681K

T99

3 K

N

4180


230-2 / 9''-2


230-4 / 9''-4


250-40 / 10''-40 Spezial


230-8 / 9''-8

4180 710 8106

4126 713 3100

4126 642 7600

4130 713 1600


➂ Nicht zugelassen für KM 56

(a) KombiTool

80


68

1K

T8

05

KN

4137➀ 4133 007 1007 ➊ 4119 710 8103

➌ 4119 710 6000➋ 4119 716 3203




➁ 4133 713 4110




➊ + ➋ + ➌ = 4119 007 1027

68

1K

T9

27

KN

4137➀ 4133 007 1007 ➊ 4119 710 8103

➌ 4119 710 6000➋ 4119 716 3203




➁ 4133 713 4110



AutoCut C 25-2

➊ + ➋ + ➌ = 4119 007 1027



(a) KombiTool

81

Cutting Attachments - Mounting KM 55, 56, + FS-KM (a)

68

1K

T9

13

KN

4137➊ 4119 710 8103

4130 713 1600

4126 642 7600

➌ 4119 710 6000

➀ 4133 007 1007






➋ 4119 716 3203

➂ 4133 713 4110

➊ + ➋ + ➌ = 4119 007 1027


681K

T79

8 K

N

4137


230-2 / 9''-2


230-4 / 9''-4

4001 713 3806 ➀➁➃Grass cutting blade

250-40 / 10''-40 Spezial


230-8 / 9''-8

➂ 4119 710 8103

4126 713 3100

4126 642 7600

4130 713 1600



➃ Not approved for KM 56

(a) KombiTool

82


68

1K

T9

28

KN

4137


230-2 / 9''-2


230-4 / 9''-4


250-40 / 10''-40 Spezial


230-8 / 9''-8

4126 713 3100

4126 642 7600

4130 713 1600


4133 007 1008

➂ 4133 713 4110


681K

T661 K

N

(a) KombiTool

83

Cutting Attachments - Mounting KM 55, 56, + FSB-KM (a)

68

1K

T9

23

KN

4130 713 4501

4130 713 4100

4130 713 1501 ➀



➀ 9210 260 1400


681K

T661 K

N

(a) KombiTool

84

Cutting Attachments - MountingKM 85, 90, 94, 100, 110, 130, + FS-KM (a)

68

1K

T9

94

KN

41804180 007 1030 ➊ 4180 710 8106

➌ 4180 713 4110➋ 4180 716 3200

4002 710 2167 ➀Mowing headDuroCut 20-2

4133 713 4110 ➁




➊ + ➋ + ➌ = 4180 007 1028➀ Teil ist in Brasilien nicht erhältlich



➂ Not approved for KM 130

68

1K

T9

95

KN

41804180 007 1030 ➊ 4180 710 8106

➌ 4180 713 4110➋ 4180 716 3200

4133 713 4110 ➁

➁ Part is included with deflector➊ + ➋ + ➌ = 4180 007 1028➀ Part not available in Brazil

➂ Approved for KM 130 only




AutoCut C 25-2

4002 710 2107 ➀➂Mowing headAutoCut 30-2

(a) KombiTool

85

Cutting Attachments - Mounting KM 85, 90, 94, 100, 110, 130, + FS-KM (a)

68

1K

T9

96

KN

41804180 007 1030 ➊ 4180 710 8106

4130 713 1600

➌ 4180 713 4110➋ 4180 716 3200

4126 642 7600



4133 713 4110 ➀


➁ No longer available➊ + ➋ + ➌ = 4180 007 1028


68

1K

T9

97

KN

4180


230-2 / 9''-2


230-4 / 9''-4


250-40 / 10''-40 Spezial


230-8 / 9''-8

4112 713 4100 ➀➁Brush knife

250-3 / 10''-3

4180 710 8106

4126 713 3100

4126 642 7600

4130 713 1600


(a) KombiTool

86


681K

T998 K

N

4180




4130 713 1600

4126 713 3100

4126 642 7600

4180 710 8201


681K

T661 K

N

(a) KombiTool

87


68

1K

T9

15

KN

4137➀ 4133 007 1007 ➊ 4119 710 8103

➌ 4119 710 6000➋ 4119 716 3203


4002 710 2167 ➃Mowing headDuroCut 20-2

➁ 4133 713 4110




➊ + ➋ + ➌ = 4119 007 1027➃ Part not available in Brazil



➂ Not approved for KM 130

68

1K

T9

30

KN

4137➀ 4133 007 1007 ➊ 4119 710 8103

➌ 4119 710 6000➋ 4119 716 3203


➁ 4133 713 4110

➁ Part is included with deflector ➊ + ➋ + ➌ = 4119 007 1027➃ Part not available in Brazil

➂ Approved for KM 130 only




AutoCut C 25-2

4002 710 2107 ➂➃Mowing headAutoCut 30-2

(a) KombiTool

88


681K

T914 K

N

4137➊ 4119 710 8103

4130 713 1600

4126 642 7600

4119 710 6000 ➌

➀ 4133 007 1007






➋ 4119 716 3203

➂ 4133 713 4110

➊ + ➋ + ➌ = 4119 007 1027


68

1K

T9

18

KN

4137


230-2 / 9''-2


230-4 / 9''-4


250-40 / 10''-40 Spezial


230-8 / 9''-8

4112 713 4100 ➀➁Brush knife

250-3 / 10''-3

4119 710 8103

4126 713 3100

4126 642 7600

4130 713 1600


(a) KombiTool

89


68

1K

T9

29

KN

4137


230-2 / 9''-2


230-4 / 9''-4


250-40 / 10''-40 Spezial


230-8 / 9''-8

4126 713 3100

4126 642 7600

4130 713 1600


4133 007 1008

➂ 4133 713 4110


681K

T920 K

N

4137




4130 713 1600

4126 713 3100

4126 642 7600

➊ 4117 710 8200



(a) KombiTool

90

Cutting Attachments - MountingKM 85, 90, 94, 100, 110, + FSB-KM (a)

68

1K

T9

24

KN

4130 713 4501

4130 713 4100

4130 713 1501 ➀



➀ 9210 260 1400


681K

T661 K

N

(a) KombiTool

91

Cutting Attachments - Mounting MM 55 + FS-MM (a)

681K

T933 K

N

➀ 4133 713 4110

4144 710 8117






681K

T934 K

N

➀ 4133 713 4110

4144 710 8117


AutoCut C 25-2




(a) MultiTool

92

Spare Parts and Accessories

Polymatic 30-2

7

1

681K

T681 S

C

2

33

4

56

8

9

No. Part No. Quan-tity

Part Name

4002 710 2120 1 Mowing headPolymatic 30-2 (C)☐ 1 - 8

1 4126 713 6500 1 Collar screw2 4110 713 3600 1 Spool housing3 4110 713 8300 2 Sleeve4 4110 713 3000 1 Spool insert5 0000 997 2300 1 Compression spring6 4110 713 6801 1 Star nut l/h thread7 4112 713 8500 1 Washer8 2 Mowing line, Ø 2.4 mm x 2.5 m, round

section (D)0000 930 2338 1 Mowing line, Ø 2.4 mm x 14.6 m, round

section (A,B)0000 930 2528 1 Mowing line, Ø 2.4 mm x 15 m, round

section (A,B)9 2 Quiet mowing line, Ø 2.4 mm x 2.5 m,

round section (B)0000 930 2419 1 Quiet mowing line, Ø 2.4 mm x 14.6 m,

round section (A,B)

Polymatic 40-2

1

681K

T682 S

C

2

33

4

56

7

8


Part Name

4003 710 2100 1 Mowing headPolymatic 40-2 (C)☐ 1 - 8

1 4003 713 6500 1 Collar screw2 4110 713 3600 1 Spool housing3 4110 713 8300 2 Sleeve4 4110 713 3000 1 Spool insert5 0000 997 2300 1 Compression spring6 4110 713 6801 1 Star nut l/h thread7 2 Mowing line, Ø 2.4 mm x 2.5 m, round





round section (A,B)

93


TrimCut 30-2

1

3

2

5

6

7

34

8,9,10

11,12

13,14,15

16,17,18

19,206

81

KT

67

2 S

C


Part Name

4002 710 2122 1 Mowing headTrimCut 30-2 (C)☐ 1 - 7, 11

1 4002 710 3600 1 Spool housing ☐ 2, 32 0000 967 3706 1 Warning pictogram3 4002 713 8302 2 Sleeve4 4002 713 6502 1 Collar screw5 4002 713 3016 1 Spool insert6 0000 997 3800 1 Compression spring7 4002 740 6700 1 Star nut l/h thread8 2 Mowing line,

Ø 2.4 mm x 3.5 m, round section (B)0000 930 2338 1 Mowing line, Ø 2.4 mm x 14.6 m, round

section (A,B)9 2 Mowing line, Ø 2.7 mm x 3.5 m, round

section (B)0000 930 2341 1 Mowing line, Ø 2.7 mm x 9.8 m, round

section (A,B)10 2 Mowing line, Ø 3 mm x 2.5 m, round

section (B)0000 930 2344 1 Mowing line, Ø 3 mm x 55 m, round

section (A,B)11 2 Quiet mowing line, Ø 2.4 mm x 5 m, round

section0000 930 2419 1 Quiet mowing line, Ø 2.4 mm x 14.6 m,

round section (A,B)12 2 Quiet mowing line, Ø 2.7 mm x 3.5 m,


round section (A,B)13 2 Mowing line, Ø 2.4 mm x 5 m, square

section (A,B)0000 930 2640 1 Mowing line, Ø 2.4 mm x 43 m, square

section (A,B)14 2 Mowing line, Ø 2.7 mm x 3.5 m, square

section (B)0000 930 2642 1 Mowing line, Ø 2.7 mm x 34 m, square

section (A,B)15 2 Mowing line, Ø 3 mm x 2.5 m, square

section (B)0000 930 2644 1 Mowing line, Ø 3 mm x 55 m, square

section (A,B)16 2 Mowing line, Ø 2.4 mm x 8 m, pentagonal

section (B)0000 930 3340 1 Mowing line, Ø 2.4 mm x 50 m, pentagonal

section (A,B)17 2 Mowing line, Ø 2.7 mm x 3.5 m,

pentagonal section (A,B)0000 930 3343 1 Mowing line, Ø 2.7 mm x 80 m, pentagonal

section (A,B)18 2 Mowing line, Ø 3 mm x 2.5 m, pentagonal

section (A,B)0000 930 3344 1 Mowing line, Ø 3 mm x 60 m, pentagonal

section (A,B)

94


TrimCut 30-2

1

3

2

5

6

7

34

8,9,10

11,12

13,14,15

16,17,18

19,20

681K

T672 S

C


Part Name


19 2 Mowing line, Ø 2.4 mm x 5 m, X-section (B)

0000 930 3410 1 Mowing line, Ø 2.4 mm x 86 m,X-section (A,B)USA

20 2 Mowing line, Ø 2.7 mm x 3.5 m,X-section (A,B)


TrimCut 31-2

8,9,10

11,12

13,14,15

16,17,18

19,20

3

2

5

6

7

3

4

1

681K

T725

SC


Part Name

4002 710 2152 1 Mowing headTrimCut 31-2☐ 1 - 7, 11

1 4002 713 3602 1 Spool housing2 4002 967 4617 1 Instruction label3 4002 713 8302 2 Sleeve4 4002 713 6502 1 Collar screw

4002 710 4314 1 Spool ☐ 5, 115 4002 713 3004 1 Spool insert6 0000 997 3800 1 Compression spring7 4002 740 6701 1 Star nut l/h thread8 2 Mowing line, Ø 2.4 mm x 8 m, round


section (A,B)9 2 Mowing line, Ø 2.7 mm x 6 m, round


section (A,B)10 2 Mowing line, Ø 3 mm x 5 m, round


section (A,B)

95


TrimCut 31-2

8,9,10

11,12

13,14,15

16,17,18

19,20

3

2

5

6

7

3

4

1

681K

T725

SC


Part Name


11 2 Quiet mowing line, Ø 2.4 mm x 8 m, roundsection (D)

0000 930 2419 1 Quiet mowing line, Ø 2.4 mm x 14.6 m,round section (A,B)

12 2 Quiet mowing line, Ø 2.7 mm x 6 m, roundsection (B)


13 2 Mowing line, Ø 2.4 mm x 8 m, squaresection (A,B)

0000 930 2640 1 Mowing line, Ø 2.4 mm x 43 m, squaresection (A,B)

14 2 Mowing line, Ø 2.7 mm x 6 m, squaresection (B)


15 2 Mowing line, Ø 3 mm x 5 m, squaresection (B)

0000 930 2644 1 Mowing line, Ø 3 mm x 55 m, squaresection (A,B)

16 2 Mowing line, Ø 2.4 mm x 8 m, pentagonalsection (B)

0000 930 3340 1 Mowing line, Ø 2.4 mm x 50 m, pentagonalsection (A,B)

17 2 Mowing line, Ø 2.7 mm x 6 m, pentagonalsection (A,B)


18 2 Mowing line, Ø 3 mm x 5 m, pentagonalsection (A,B)

0000 930 3344 1 Mowing line, Ø 3 mm x 60 m, pentagonalsection (A,B)



20 2 Mowing line, Ø 2.7 mm x 6 m,X-section (A,B)


96


TrimCut 40-2

1

3

8

2

5

6

7

3

4

9,10,11

12,13

14,15,16

17,18,19

20,21

681K

T674 S

C


Part Name


1 4002 710 3600 1 Spool housing ☐ 2, 32 0000 967 3706 1 Warning pictogram3 4002 713 8302 2 Sleeve4 4003 713 6501 1 Collar screw M12x1.5 l/h thread5 4002 713 3016 1 Spool insert6 0000 997 3800 1 Compression spring7 4002 740 6700 1 Star nut l/h thread8 4111 716 9300 1 Ring9 2 Mowing line, Ø 2.4 mm x 5 m, round







section (B)0000 930 2419 1 Quiet mowing line, Ø 2.4 mm x 14.6 m,


round section (D)0000 930 2422 1 Quiet mowing line, Ø 2.7 mm x 9.8 m,










pentagonal section (B)0000 930 3343 1 Mowing line, Ø 2.7 mm x 80 m, pentagonal


section (B)0000 930 3344 1 Mowing line, Ø 3 mm x 60 m, pentagonal

section (A,B)

97


TrimCut 40-2

1

3

8

2

5

6

7

3

4

9,10,11

12,13

14,15,16

17,18,19

20,216

81

KT

67

4 S

C


Part Name




21 2 Mowing line, Ø 2.7 mm x 3.5 m,X-section (B)


TrimCut 41-2

9,10,11

12,13

14,15,16

17,18,19

20,21

3

2

5

6

7

3

4

1

8

681K

T726

SC


Part Name


1 4002 713 3602 1 Spool housing2 4003 967 4607 1 Instruction label3 4002 713 8302 2 Sleeve4 4003 713 6501 1 Collar screw M12x1.5 l/h thread

4003 710 4306 1 Spool ☐ 5, 135 4002 713 3004 1 Spool insert6 0000 997 3800 1 Compression spring7 4002 740 6701 1 Star nut l/h thread8 4111 716 9300 1 Ring9 2 Mowing line, Ø 2.4 mm x 8 m, round





section (B)

98


TrimCut 41-2

9,10,11

12,13

14,15,16

17,18,19

20,21

3

2

5

6

7

3

4

1

8

681K

T726

SC


Part Name


0000 930 2344 1 Mowing line, Ø 3 mm x 55 m, roundsection (A,B)



13 2 Quiet mowing line, Ø 2.7 mm x 6 m, roundsection












19 2 Mowing line, Ø 3 mm x 5 m, pentagonalsection (B)






99


TrimCut 50-2

1

3

8

2

5

6

7

34

9,10,11

12,13

14,15,16

17,18,19,20

21,226

81

KT

67

6 S

C


Part Name


1 4002 710 3600 1 Spool housing ☐ 2, 32 0000 967 3706 1 Warning pictogram3 4002 713 8302 2 Sleeve4 4005 713 6500 1 Collar screw M14x1.5 l/h thread5 4002 713 3016 1 Spool insert6 0000 997 3800 1 Compression spring7 4002 740 6700 1 Star nut l/h thread8 4111 716 9300 1 Ring9 2 Mowing line, Ø 2.4 mm x 5 m, round









round section (D)0000 930 2422 1 Quiet mowing line, Ø 2.7 mm x 9.8 m,










pentagonal section (A,B)0000 930 3343 1 Mowing line, Ø 2.7 mm x 80 m, pentagonal



section (A,B)

100


TrimCut 50-2

1

3

8

2

5

6

7

34

9,10,11

12,13

14,15,16

17,18,19,20

21,22

681K

T676 S

C


Part Name








TrimCut 51-2

9,10,11

12,13

14,15,16

17,18,19,20

21,22

3

2

5

6

7

3

4

1

8

681K

T727

SC


Part Name


1 4002 713 3602 1 Spool housing2 4005 967 4603 1 Instruction label3 4002 713 8302 2 Sleeve4 4005 713 6500 1 Collar screw M14x1.5 l/h thread

4003 710 4306 1 Spool ☐ 5, 135 4002 713 3004 1 Spool insert6 0000 997 3800 1 Compression spring7 4002 740 6701 1 Star nut l/h thread8 4111 716 9300 1 Ring9 2 Mowing line, Ø 2.4 mm x 8 m, round





section (B)

101


TrimCut 51-2

9,10,11

12,13

14,15,16

17,18,19,20

21,22

3

2

5

6

7

3

4

1

8

681K

T727

SC


Part Name





13 2 Quiet mowing line, Ø 2.7 mm x 6 m, roundsection (D)










18 2 Mowing line, Ø 2.7 mm x 6 m, pentagonalsection (A,B)


19 2 Mowing line, Ø 3 mm x 5 m, pentagonalsection (B)








102


AutoCut 2-2

4

6

3

21

5

681K

T801

SC


Part Name

4008 710 2100 1 Mowing head AutoCut 2-2☐ 1 - 9

1 4008 710 3600 1 Spool housing2 9455 621 0570 1 Circlip 8x0.83 6235 997 2200 1 Spring4 4008 710 4300 1 Spool ☐ 55 2 Quiet mowing line,

Ø 1.6 mm x 4 m, round section (D)0000 930 2415 1 Quiet mowing line,

Ø 1.6 mm x 20 m, round section (A,B)6 4008 713 7000 1 Cover

AutoCut C 4-2

681K

T728

SC

9

2

5

7

6

4

8

21

3


Part Name

4006 710 2121 1 Mowing head AutoCut C 4-2☐ 1 - 9

1 4006 713 3201 1 Housing, top2 4004 713 8300 2 Sleeve3 0000 967 4048 1 Warning pictogram4 4006 713 3701 1 Housing, bottom5 9074 478 3025 4 Pan head self-tapping screw IS-P4x166 0000 997 2015 1 Compression spring7 4006 713 3000 1 Spool insert8 4006 710 4001 1 Cap9 2 Quiet mowing line,

Ø 2 mm x 2.5 m, round section (D)0000 930 2416 1 Quiet mowing line, Ø 2 mm x 15.3 m,

round section (A,B)

103


AutoCut 5-2

2

1

4

6

5

3

2

7

8

68

1K

T5

49

SC


Part Name

4006 710 2100 1 Mowing headAutoCut 5-2☐ 1 - 7

1 4006 710 3600 1 Spool housing ☐ 22 4004 713 8300 2 Sleeve3 0000 997 3100 1 Compression spring

4004 710 4300 1 Spool with nylon line ☐ 4, 74 4004 713 3000 1 Spool insert5 4006 710 4000 1 Cap ☐ 66 9465 620 2771 1 Snap ring 227 2 Mowing line, Ø 2 mm x 3 m, round

section (A,B)0000 930 2335 1 Mowing line, Ø 2 mm x 15.3 m, round

section (A,B)8 2 Quiet mowing line, Ø 2 mm x 3 m, round

section0000 930 2416 1 Quiet mowing line, Ø 2 mm x 15.3 m,

round section (A,B)

AutoCut C 5-2

2

1

3

4

56

7

681K

T547 S

C


Part Name

4006 710 2105 1 Mowing headAutoCut C 5-2☐ 1 - 5, 7

1 1 Spool housing (D)2 4006 713 3000 1 Spool insert3 0000 997 2015 1 Compression spring4 4006 710 4001 1 Cap5 0000 967 3706 1 Warning pictogram6 2 Mowing line,

Ø 2 mm x 2.5 m, round section (B)0000 930 2335 1 Mowing line, Ø 2 mm x 15.3 m, round

section (A,B)7 2 Quiet mowing line,

Ø 2 mm x 2.5 m, round section0000 930 2416 1 Quiet mowing line, Ø 2 mm x 15.3 m,

round section (A,B)

104


AutoCut 10-2

2

1

4

7

6

5

3

2

8

9

681K

T587 S

C


Part Name

4004 710 2100 1 Mowing headAutoCut 10-2 (C)☐ 1 - 8


4004 710 4300 1 Spool with nylon line ☐ 4, 84 4004 713 3000 1 Spool insert5 4004 710 4000 1 Cap ☐ 6, 76 9210 260 1400 1 Hexagon nut M127 9465 620 2771 1 Snap ring 228 2 Mowing line, Ø 2 mm x 3 m, round

section (D)0000 930 2335 1 Mowing line, Ø 2 mm x 15.3 m, round


section (B)0000 930 2416 1 Quiet mowing line, Ø 2 mm x 15.3 m,

round section (A,B)

AutoCut 11-2

2

1

4

7

65

3

2

8,9

10,11

681K

T588 S

C


Part Name

4004 710 2105 1 Mowing headAutoCut 11-2☐ 1 - 7,10


4004 710 4304 1 Spool with nylon line ☐ 4, 104 4004 713 3000 1 Spool insert5 4004 710 4000 1 Cap ☐ 6, 76 9210 260 1400 1 Hexagon nut M127 9465 620 2771 1 Snap ring 228 2 Mowing line, Ø 2 mm x 3 m, round

section (B)0000 930 2335 1 Mowing line, Ø 2 mm x 15.3 m, round




section0000 930 2416 1 Quiet mowing line, Ø 2 mm x 15.3 m,

round section (A,B)

105


AutoCut 11-2

2

1

4

7

65

3

2

8,9

10,11

681K

T588 S

C


Part Name

4004 710 2105 1 Mowing headAutoCut 11-2☐ 1 - 7,10

11 2 Quiet mowing line, Ø 2.4 mm x 2.5 m,round section (B)


AutoCut 20-2

2

4

1

8

765

3

2

9,10

11,12

68

1K

T5

89

SC


Part Name

4002 710 2106 1 Mowing headAutoCut 20-2 (C)☐ 1 - 8, 10


4002 710 4307 1 Spool with nylon line ☐ 4, 104 4002 713 3007 1 Spool insert5 4002 710 4000 1 Cap ☐ 6, 76 9210 260 1410 1 Hexagon nut M 127 9465 620 2771 1 Snap ring 228 4002 713 6501 1 Collar screw9 2 Mowing line, Ø 2 mm x 3 m, round

section (A,B)0000 930 2335 1 Mowing line, Ø 2 mm x 15.3 m, round




section (A,B)

106


AutoCut 20-2

2

4

1

8

765

3

2

9,10

11,12

681K

T589 S

C


Part Name


11 2 Quiet mowing line, Ø 2 mm x 3 m, roundsection (B)

0000 930 2416 1 Quiet mowing line, Ø 2 mm x 15.3 m,round section (A,B)



AutoCut 21-2

2

4

1

8

765

3

2

9,10

11,12

681K

T590 S

C


Part Name



4002 710 4307 1 Spool with nylon line ☐ 4, 104 4002 713 3007 1 Spool insert5 4002 710 4000 1 Cap ☐ 6, 76 9210 260 1410 1 Hexagon nut M 127 9465 620 2771 1 Snap ring 228 4002 713 6501 1 Collar screw9 2 Mowing line, Ø 2 mm x 3 m, round





section (B)

107


AutoCut 21-2

2

4

1

8

765

3

2

9,10

11,12

68

1K

T5

90

SC


Part Name





AutoCut 25-2

7,81

4

35

6

9,10

11,12

13,14

15,16

2

4

68

1K

T5

91

SC


Part Name

4002 710 2108 1 Mowing headAutoCut 25-2☐ 1 - 6, 9

1 4002 713 9608 1 Top2 4002 713 6801 1 Collar nut M10x1 l/h thread3 0000 997 1501 1 Helical spring4 4003 713 8301 2 Sleeve

4002 710 4313 1 Spool with nylon line ☐ 5, 95 4002 713 3017 1 Spool insert6 4002 713 9708 1 Base7 2 Mowing line,

Ø 2.4 mm x 3.5 m, round section (B)0000 930 2338 1 Mowing line, Ø 2.4 mm x 14.6 m, round





round section (A,B)

108


AutoCut 25-2

7,81

4

35

6

9,10

11,12

13,14

15,16

2

4

681K

T591 S

C


Part Name






12 2 Mowing line, Ø 2.7 mm x 3.5 m, squaresection (B)




14 2 Mowing line, Ø 2.7 mm x 3.5 m,pentagonal section (A,B)






109


AutoCut C 25-2

8

9

10

11

12

2

1

7

5

6

4

3

68

1K

T5

48

SC


Part Name

4002 710 2137 1 Mowing headAutoCut C 25-2☐ 1 - 7, 9

1 4002 713 9601 1 Top2 4002 713 8301 2 Sleeve3 4002 967 4608 1 Instruction label4 4002 713 6801 1 Collar nut M10x1 l/h thread

4002 710 4301 1 Spool with nylon line ☐ 5, 95 4002 713 3003 1 Spool insert6 0000 997 1501 1 Helical spring7 4002 713 9701 1 Base8 2 Mowing line, Ø 2.4 mm x 4 m, round








section (A,B)12 2 Mowing line, Ø 2.4 mm x 4 m, X-section (B

)0000 930 3410 1 Mowing line, Ø 2.4 mm x 86 m,

X-section (A,B)USA

110


AutoCut 30-2

7,8

1

2

46

5

9,10

11,12

13,14

15,16

3

2

681K

T592 S

C


Part Name


1 4003 713 9605 1 Top2 4003 713 8301 2 Sleeve3 4002 713 6801 1 Collar nut M10x1 l/h thread4 0000 997 1601 1 Compression spring5 4003 713 9705 1 Base

4003 710 4303 1 Spool with nylon line ☐ 6, 86 4003 713 3011 1 Spool insert7 1 Mowing line, Ø 2.4 mm x 7.5 m, round






round section (A,B)10 2 Quiet mowing line, Ø 2.7 mm x 6 m, round


round section (A,B)11 2 Mowing line, Ø 2.4 mm x 7.5 m, square









X-section (B)0000 930 3410 1 Mowing line, Ø 2.4 mm x 86 m,

X-section (A,B)USA



111


AutoCut 40-2

8,9

17

2

45

6

10

11,12

13,14

15

3

2

68

1K

T5

93

SC


Part Name

4003 710 2125 1 Mowing headAutoCut 40-2☐ 1 - 8

1 4003 713 9605 1 Top2 4003 713 8301 2 Sleeve3 4003 713 6800 1 Collar nut M12x1.5 l/h thread4 0000 997 1601 1 Compression spring

4003 710 4303 1 Spool with nylon line ☐ 5, 85 4003 713 3011 1 Spool insert6 4003 713 9705 1 Base7 4111 716 9300 1 Ring8 2 Mowing line, Ø 2.7 mm x 6 m, round














section (A,B)15 2 Mowing line, Ø 2.7 mm x 6 m, X-section (B

)0000 930 3411 1 Mowing line, Ø 2.7 mm x 68 m,

X-section (A,B)USA

112


AutoCut 40-4

18

2

56

7

9,10

11,12

13,14

15,16

3,42

681K

T766

SC


Part Name

4005 710 2100 1 Mowing headAutoCut 40-4☐ 1 - 3, 5, - 8, 10

1 4005 710 9600 1 Top2 4003 713 8301 4 Sleeve3 4005 713 6800 1 Collar nut M14x1.5 l/h thread4 4003 713 6801 1 Collar nut M12x1.5 l/h thread5 0000 997 1601 1 Compression spring

4003 710 4305 1 Spool with nylon line ☐ 6, 106 4003 713 3012 1 Spool insert7 4003 713 9705 1 Base8 4111 716 9300 1 Ring9 4 Quiet mowing line, Ø 2.4 mm x 2.5 m,


round section (A,B)10 4 Quiet mowing line, Ø 2.7 mm x 2 m, round


round section (A,B)11 4 Mowing line, Ø 2.4 mm x 2.5 m, square


section (A,B)12 4 Mowing line, Ø 2.7 mm x 2 m, square







X-section (B)0000 930 3410 1 Mowing line, Ø 2.4 mm x 86 m,

X-section (A,B)USA

16 4 Mowing line, Ø 2.7 mm x 2 m,X-section (A,B)


113


STIHL SuperCut 10-1

2

4

6

8

7

1

5

2

3

68

1K

T5

95

SC


Part Name

4004 710 2110 1 Mowing head SuperCut 10-1 (C)☐ 1 - 7

1 4004 710 9600 1 Top2 4002 713 8310 2 Sleeve3 4002 713 3400 1 Bow

4004 710 4302 1 Spool with nylon line ☐ 4, 74 4002 713 3010 1 Spool insert5 4004 713 6800 1 Collar nut M126 4002 713 9710 1 Base7 1 Mowing line, Ø 2.4 mm x 5 m, round

section0000 930 2338 1 Mowing line, Ø 2.4 mm x 14.6 m, round



round section (A,B)

STIHL SuperCut 20-1

2

4

6

8

7

3

1

52

68

1K

T5

96

SC


Part Name


1 4002 710 9605 1 Top2 4002 713 8310 2 Sleeve3 4002 713 3400 1 Bow

4002 710 4304 1 Spool with nylon line ☐ 4, 74 4002 713 3010 1 Spool insert5 4002 713 6804 1 Collar nut M10x1 l/h thread6 4002 713 9710 1 Base7 1 Mowing line, Ø 2.4 mm x 5 m, round




round section (A,B)

114


STIHL SuperCut 20-2

5

76

3

9

8

4

2

1

4

5

681K

T597 S

C


Part Name

4002 710 2162 1 Mowing headSuperCut 20-2☐ 1 - 8

1 4002 710 9615 1 Top2 4002 713 7315 1 Index plate3 4002 713 9715 1 Base4 4002 713 3400 2 Bow5 4002 713 8310 2 Sleeve6 4002 713 6805 1 Collar nut M10x1 l/h thread

4002 710 4309 1 Spool with nylon line ☐ 7, 87 4002 713 3015 1 Spool insert8 2 Mowing line, Ø 2.4 mm x 3 m, round




round section (A,B)

STIHL SuperCut 2-1

10

11

15

13

14

1

6

2

127

8

9

17

165

6

43

681K

T598 S

C


Part Name


1 4002 713 9605 1 Top2 4002 713 6802 2 Collar nut3 0000 958 0516 2 Washer4 4002 713 7205 2 Pawl5 4002 713 6500 2 Collar screw6 4002 713 8305 2 Sleeve7 4002 713 7300 1 Index plate8 4002 713 6905 1 Synchronizer ring9 4002 998 4000 1 Torsion spring

10 4002 713 6900 1 Adjusting ring11 4002 713 6910 1 Gear ring12 4002 713 6801 1 Collar nut M10x1 l/h thread13 4002 713 9704 1 Base14 4002 893 1300 1 Special wrench



section (A,B)

115


STIHL SuperCut 2-1

10

11

15

13

14

1

6

2

127

8

9

17

165

6

43

68

1K

T5

98

SC


Part Name




STIHL SuperCut 2-2

10

11

15

13

14

1

6

2

127

8

9

17

16

5

6

43

68

1K

T5

99

SC


Part Name

4002 710 2140 1 Mowing headSuperCut 2-2 (C)☐ 1 - 16


10 4002 713 6900 1 Adjusting ring11 4002 713 6910 1 Gear ring12 4002 713 6801 1 Collar nut M10x1 l/h thread13 4003 713 9700 1 Base14 4002 893 1300 1 Special wrench


section

116


STIHL SuperCut 2-2

10

11

15

13

14

1

6

2

127

8

9

17

16

5

6

43

681K

T599 S

C


Part Name

4002 710 2140 1 Mowing headSuperCut 2-2 (C)☐ 1 - 16

0000 930 2338 1 Mowing line, Ø 2.4 mm x 14.6 m, roundsection (A,B)



STIHL SuperCut 40-2

10

11

16

13

15

1

6

14

127

8

9

18

17

5

62

43

681K

T600 S

C


Part Name



10 4002 713 6900 1 Adjusting ring11 4002 713 6910 1 Gear ring12 4003 713 6800 1 Collar nut M12x1.5 l/h thread13 4003 713 9700 1 Base14 4111 716 9300 1 Ring15 4002 893 1300 1 Special wrench

4002 710 4300 1 Spool with nylon line ☐ 16, 1716 4002 713 3005 1 Spool insert

117


STIHL SuperCut 40-2

10

11

16

13

15

1

6

14

127

8

9

18

17

5

62

43

68

1K

T6

00

SC


Part Name


17 2 Mowing line, Ø 2.4 mm x 3.75 m, roundsection


0000 930 2528 1 Mowing line, Ø 2.4 mm x 15 m, roundsection (A,B)



STIHL PolyCut 5-3

5

4 3

71

6

2

68

1K

T6

01

SC


Part Name

4004 710 2131 1 Mowing headPolyCut 5-3☐ 1 - 7

1 4004 713 9601 1 Top2 4004 713 6600 3 Pin3 4111 007 1001 3 Replacement blades (pack of 12)4 4004 713 9701 1 Base5 9211 260 1400 1 Hexagon nut M126 4130 713 1501 1 Thrust plate7 4130 893 7800 1 Locking pin

118


STIHL PolyCut 6-3

2

1

34

5

6

7

681K

T602 K

N


Part Name


1 4004 713 9601 1 Top2 4004 713 6600 3 Pin3 4111 007 1001 3 Replacement blades (pack of 12)4 4004 713 9701 1 Base5 4006 713 6800 1 Collar nut6 4140 713 1501 1 Thrust plate7 4130 893 7800 1 Locking pin

STIHL PolyCut 10-3

5

1

3

2

4

6

3

681K

T603 S

C


Part Name

4004 710 2130 1 Mowing headPolyCut 10-3 (C)☐ 1 - 7

1 4004 710 9610 1 Top2 4002 713 9700 1 Base3 4002 713 8300 2 Sleeve4 4111 710 8700 3 Collar screw5 9210 319 0900 3 Hexagon nut M66 4111 007 1001 1 Replacement blades (pack of 12)

119


STIHL PolyCut 20-3

5

1

3

2

4

6

36

81

KT

65

7 S

C


Part Name


1 4002 710 9601 1 Top2 4002 713 9700 1 Base3 4002 713 8300 2 Sleeve4 4111 710 8700 3 Collar screw5 9210 319 0900 3 Hexagon nut M66 4111 007 1001 1 Replacement blades (pack of 12)

STIHL PolyCut 40-3

46

1

27

5

3

68

1K

T6

58

SC


Part Name

4111 710 2100 1 Mowing headPolyCut 40-3 (C)☐ 1 - 7

1 4111 713 9601 1 Top2 4111 713 9701 1 Base3 4002 713 8300 2 Sleeve4 4111 716 9300 1 Ring5 4111 710 8700 3 Collar screw6 9210 319 0900 3 Hexagon nut M67 4111 007 1001 1 Replacement blades (pack of 12)

120


STIHL PolyCut 41-3

68

1K

T7

35

SC

2

81

4

3

75,6

9


Part Name


1 4003 713 9602 1 Top2 0000 967 3730 1 Warning pictogram3 4111 713 9701 1 Base4 4002 713 8300 2 Sleeve5 4003 713 6801 1 Collar nut M12x1.5 l/h thread6 4005 713 6800 1 Collar nut M14x1.5 l/h thread7 4111 710 8700 3 Collar screw8 9210 319 0900 3 Hexagon nut M69 4111 007 1001 1 Replacement blades (pack of 12)

STIHL DuroCut 5-2

9

10,11,12

13,14

15

17

16 4

334

6

7

1 8

2

5

681K

T842

AM


Part Name

4006 710 2125 1 Mowing headDuroCut 5-2☐ 1 - 9

1 4006 710 9600 1 Top2 4006 967 4604 1 Instruction label3 4002 710 4500 2 Support4 4006 713 8301 2 Sleeve5 4006 713 9702 1 Base6 9074 477 4135 4 Pan head self-tapping screw IS-P5x207 4006 713 9702 1 Base8 4130 893 7800 1 Locking pin9 0000 930 3503 2 Serrated mowing line Ø 2x195 mm

48 pieces10 2 Mowing line, Ø 1.6x195 mm, round

section (B)0000 930 2334 1 Mowing line, Ø 1.6 mm x 20 m, round

section (A,B)11 2 Mowing line, Ø 2x195 mm, round


section (A,B)12 2 Mowing line, Ø 2.4x195 mm, round

section (B)

121


STIHL DuroCut 5-2

9

10,11,12

13,14

15

17

16 4

334

6

7

1 8

2

568

1KT8

42 A

M


Part Name

4006 710 2125 1 Mowing headDuroCut 5-2☐ 1 - 9


13 2 Quiet mowing line, Ø 2x185 mm, roundsection (B)


14 2 Quiet mowing line, Ø 2.4x195 mm, roundsection (B)


15 2 Mowing line, Ø 2.4x195 mm, squaresection (B)


16 2 Mowing line, Ø 2,4x195 mm, pentagonalsection (B)


17 2 Mowing line, Ø 2.4x195 mm,X-section (B)


122


STIHL DuroCut 20-2

10,11

12,13,14

15,16,17

18,19

22,23

20,21

43

34

6

7

1

2

5

8

9

681K

T840

AM


Part Name

4002 710 2167 1 Mowing headDuroCut 20-2☐ 1 - 7, 11

1 4002 713 9607 1 Top2 4002 967 4618 1 Instruction label3 4002 710 4500 2 Support4 4002 713 8304 2 Sleeve5 4002 713 9703 2 Base6 4002 713 6801 1 Collar nut M10x1 l/h thread7 9074 477 4135 4 Pan head self-tapping screw IS-P5x20

4005 007 1001 1 Guard kit (B) ☐ 8, 98 4005 713 4500 1 Guard (B)9 9074 478 3005 4 Pan head self-tapping screw

IS-P4x14 (B)10 0000 930 3503 2 Serrated mowing line Ø 2x195 mm (B)

48 pieces11 0000 930 3504 2 Serrated mowing line Ø 3x185 mm

48 pieces12 2 Mowing line, Ø 2x185 mm, round






section (A,B)15 2 Quiet mowing line, Ø 2x185 mm, round

section (B)0000 930 2416 1 Quiet mowing line, Ø 2 mm x 15.3 m,

round section (A,B)16 2 Quiet mowing line, Ø 2.4x185 mm, round


round section (A,B)17 2 Quiet mowing line, Ø 2.7x185 mm, round


round section (A,B)18 2 Mowing line, Ø 2.4x185 mm, square


section (A,B)19 2 Mowing line, Ø 2.7x185 mm, square


section (A,B)20 2 Mowing line, Ø 2,4x185 mm, pentagonal


section (A,B)

123


STIHL DuroCut 20-2

10,11

12,13,14

15,16,17

18,19

22,23

20,21

43

34

6

7

1

2

5

8

9

681K

T840

AM


Part Name








STIHL DuroCut 40-4

17

11,12

13,14,15,16

18,19,20

24

21,22,23

43

3

46,7

8

1

2

5

9

10

68

1K

T8

38

AM


Part Name


1 4003 713 9603 1 Top2 4005 967 4604 1 Instruction label3 4005 710 4500 4 Support4 4005 713 8301 4 Sleeve5 4005 713 9700 1 Base6 4003 713 6801 1 Collar nut M12x1.5 l/h thread7 4005 713 6800 1 Collar nut M14x1.5 l/h thread8 9074 477 4135 4 Pan head self-tapping screw IS-P5x209 4005 713 4500 1 Guard

10 9074 478 2970 4 Pan head self-tapping screw IS-P4x1011 0000 930 3504 4 Serrated mowing line Ø 3x185 mm (B)

48 pieces12 0000 930 3505 4 Serrated mowing line Ø 4x215 mm

48 pieces13 4 Mowing line, Ø 2.7x185 mm, round


section (A,B)

124


STIHL DuroCut 40-4

17

11,12

13,14,15,16

18,19,20

24

21,22,23

43

3

46,7

8

1

2

5

9

10

681K

T838 A

M


Part Name


14 4 Mowing line, Ø 3x215 mm, roundsection (B)


15 4 Mowing line, Ø 3.3x215 mm, roundsection (B)


16 4 Mowing line, Ø 4x215 mm, roundsection (B)

0000 930 3605 4 Mowing line, Ø 4x215 mm, roundsection (A,B)48 pieces


17 4 Quiet mowing line, Ø 4x215 mm, roundsection (B)

0000 930 3708 Quiet mowing line, Ø 4 mm x 28 m, roundsection (A,B)



19 4 Mowing line, Ø 3x215 mm, squaresection (B)






22 4 Mowing line, Ø 3x215 mm, pentagonalsection (B)


23 4 Mowing line, Ø 3.3x215 mm, pentagonalsection (B)




125


FixCut 5-2

10

11

8

1

435

2

6

7

9

681K

T767

SC


Part Name

4006 710 2117 1 Mowing headFixCut 5-2☐ 2 - 8, 10

1 1 Top (D)2 4002 713 9702 1 Base3 4001 713 7200 2 Pawl4 4001 998 0400 2 Torsion spring5 4001 713 8300 2 Sleeve6 4130 713 1600 1 Thrust washer7 4006 713 6801 1 Collar nut M88 4140 713 1501 1 Thrust plate9 2 Mowing line, Ø 2.4x203 mm, round

section (D)0000 930 2310 1 Mowing line, Ø 2.4x203mm, round

section (A,B)50 pieces

10 Quiet mowing line, Ø 2.4x203 mm, roundsection (D)


11 0000 930 3340 1 Mowing line, Ø 2.4 mm x 50 m, pentagonalsection (B)

FixCut 25-2

8,9

10,11

12,13

1

546

3

2

7

68

1K

T6

60

SC


Part Name


1 1 Top (D)2 9211 260 1350 1 Hexagon nut M10x1 l/h thread3 4002 713 9702 1 Base4 4001 713 7200 2 Pawl5 4001 998 0400 2 Torsion spring6 4001 713 8300 2 Sleeve7 4001 710 9400 1 Thrust piece

USA, CDN8 2 Mowing line, Ø 2.4x203 mm, round

section (D)0000 930 2310 1 Mowing line, Ø 2.4x203mm, round

section (A,B)50 pieces

9 0000 930 2312 1 Mowing line, Ø 3.3x203mm, roundsection (B)50 pieces USA, CDN

10 1 Quiet mowing line, Ø 2.4x203 mm, roundsection (D)

126


FixCut 25-2

8,9

10,11

12,13

1

546

3

2

7

681K

T660 S

C


Part Name



11 0000 930 2422 1 Quiet mowing line, Ø 2.7 mm x 9.8 m,round section (A,B)

12 0000 930 3340 1 Mowing line, Ø 2.4 mm x 50 m, pentagonalsection (B)

13 0000 930 3344 1 Mowing line, Ø 3 mm x 60 m, pentagonalsection (B)

127

128


Round nylon line

Dimension Colour Part No. Part Name

Ø 1,4 mm Translucent16 m 0000 930 2284 Mowing line, Ø 1.4 mm x 16 m, round section

Ø 1,6 mm Blue20 m 0000 930 2334 Mowing line, Ø 1.6 mm x 20 m, round section

Ø 2,0 mm Green15,3 m 0000 930 2335 Mowing line, Ø 2 mm x 15.3 m, round section15,2 m ➀ 0000 930 2300 Mowing line, Ø 2 mm x 15.2 m, round section

62 m 0000 930 2336 Mowing line, Ø 2 mm x 62 m, round section123 m ➀ 0000 930 2301 Mowing line, Ø 2 mm x 123 m, round section

123 m 0000 930 2337 Mowing line, Ø 2 mm x 123 m, round section372 m 0000 930 2263 Mowing line, Ø 2 mm x 372 m, round section609 m 0000 930 2264 Mowing line, Ø 2 mm x 609 m, round section

1544 m 0000 930 2575 Mowing line, Ø 2 mm x 1544 m, round section

Ø 2,4 mm Orange14,6 m 0000 930 2338 Mowing line, Ø 2.4 mm x 14.6 m, round section15,2 m ➀ 0000 930 2302 Mowing line, Ø 2.4 mm x 15.2 m, round section

43 m 0000 930 2339 Mowing line, Ø 2.4 mm x 43 m, round section86 m 0000 930 2340 Mowing line, Ø 2.4 mm x 86 m, round section87 m ➀ 0000 930 2303 Mowing line, Ø 2.4 mm x 87 m, round section

261 m 0000 930 2246 Mowing line, Ø 2.4 mm x 261 m, round section261 m ➀ 0000 930 2304 Mowing line, Ø 2.4 mm x 261 m, round section


1086 m 0000 930 2573 Mowing line, Ø 2.4 mm x 1086 m, round section

Ø 2,7 mm Red9,8 m 0000 930 2341 Mowing line, Ø 2.7 mm x 9.8 m, round section

10,9 m ➀ 0000 930 2305 Mowing line, Ø 2.7 mm x 10.9 m, round section

34 m 0000 930 2342 Mowing line, Ø 2.7 mm x 34 m, round section68 m 0000 930 2343 Mowing line, Ø 2.7 mm x 68 m, round section72 m ➀ 0000 930 2306 Mowing line, Ø 2.7 mm x 72 m, round section



896 m 0000 930 2571 Mowing line, Ø 2.7 mm x 896 m, round section

For Brazil only①

129


Round nylon line

Ø 3,0 mm Yellow55 m 0000 930 2344 Mowing line, Ø 3 mm x 55 m, round section

168 m 0000 930 2542 Mowing line, Ø 3 mm x 168 m, round section280 m 0000 930 2543 Mowing line, Ø 3 mm x 280 m, round section300 m ➀ 0000 930 2320 Mowing line, Ø 3 mm x 300 m, round section

Ø 3,3 mm Black6,8 m 0000 930 2345 Mowing line, Ø 3.3 mm x 6.8 m, round section20 m 0000 930 2346 Mowing line, Ø 3.3 mm x 20 m, round section40 m 0000 930 2347 Mowing line, Ø 3.3 mm x 40 m, round section

142 m 0000 930 2287 Mowing line, Ø 3.3 mm x 142 m, round section236 m 0000 930 2290 Mowing line, Ø 3.3 mm x 236 m, round section591 m 0000 930 2569 Mowing line, Ø 3.3 mm x 591 m, round section

Ø 4,0 mm Dark green28 m 0000 930 3607 Mowing line, Ø 4 mm x 28 m, round section

For Brazil only①

Round, quiet nylon line


Ø 2,0 mm Green15,3 0000 930 2416 Quiet mowing line, Ø 2 mm x 15.3 m, round section62 m 0000 930 2418 Quiet mowing line, Ø 2 mm x 62 m, round section

123 m 0000 930 2424 Quiet mowing line, Ø 2 mm x 123 m, round section

Ø 2,4 mm Orange14,6 m 0000 930 2419 Quiet mowing line, Ø 2.4 mm x 14.6 m, round section

43 m 0000 930 2420 Quiet mowing line, Ø 2.4 mm x 43 m, round section86 m 0000 930 2421 Quiet mowing line, Ø 2.4 mm x 86 m, round section

261 m 0000 930 2535 Quiet mowing line, Ø 2.4 mm x 261 m, round section

Ø 2,7 mm Red9,8 m 0000 930 2422 Quiet mowing line, Ø 2.7 mm x 9.8 m, round section68 m 0000 930 2423 Quiet mowing line, Ø 2.7 mm x 68 m, round section

Ø 4 mm Dark green28 m 0000 930 3708 Quiet mowing line, Ø 4 mm x 28 m, round section

130


Square section nylon line


Ø 2,4 mm Orange43 m 0000 930 2640 Mowing line, Ø 2.4 mm x 43 m, square section86 m 0000 930 2641 Mowing line, Ø 2.4 mm x 86 m, square section

264 m 0000 930 2612 Mowing line, Ø 2.4 mm x 261 m, square section441 m 0000 930 2613 Mowing line, Ø 2.4 mm x 441 m, square section

Ø 2,7 mm Red34 m 0000 930 2642 Mowing line, Ø 2.7 mm x 34 m, square section68 m 0000 930 2643 Mowing line, Ø 2.7 mm x 68 m, square section


Ø 3,0 mm Yellow55 m 0000 930 2644 Mowing line, Ø 3 mm x 55 m, square section

169 m 0000 930 2619 Mowing line, Ø 3 mm x 169 m, square section282 m 0000 930 2620 Mowing line, Ø 3 mm x 282 m, square section312 m ➀ 0000 930 2633 Mowing line, Ø 3 mm x 312 m, square section

Ø 3,3 mm Black40 m 0000 930 2645 Mowing line, Ø 3.3 mm x 40 m, square section


For Brazil only①

131


Pentagonal nylon line


Ø 2,4 mm Orange50 m 0000 930 3340 Mowing line, Ø 2.4 mm x 50 m, pentagonal section

100 m 0000 930 3341 Mowing line, Ø 2.4 mm x 100 m, pentagonal section0000 930 3339 Mowing line, Ø 2.4 mm x 300 m, pentagonal section

Ø 2,7 mm Red40 m 0000 930 3342 Mowing line, Ø 2.7 mm x 40 m, pentagonal section80 m 0000 930 3343 Mowing line, Ø 2.7 mm x 80 m, pentagonal section

240 m 0000 930 3303 Mowing line, Ø 2.7 mm x 240 m, pentagonal section

Ø 3,0 mm Yellow60 m 0000 930 3344 Mowing line, Ø 3 mm x 60 m, pentagonal section

200 m 0000 930 3305 Mowing line, Ø 3 mm x 200 m, pentagonal section320 m 0000 930 3306 Mowing line, Ø 3 mm x 320 m, pentagonal section

Ø 3,3 mm Black24 m 0000 930 3345 Mowing line, Ø 3.3 mm x 24 m, pentagonal section48 m 0000 930 3346 Mowing line, Ø 3.3 mm x 48 m, pentagonal section

Pre-cut round section nylon line


Ø 2,4 mm Orange50 0000 930 2315 Mowing line, Ø 2.4x203 mm, round section

100 0000 930 2317 Mowing line, Ø 2.4x203 mm, round section

Ø 3,3 mm Black50 0000 930 2312 Mowing line, Ø 3.3x203mm, round section

100 0000 930 2313 Mowing line, Ø 3.3x203mm, round section

Ø 4,0 mm Dark green48 0000 930 3605 Mowing line, Ø 4x215 mm, round section

681K

T27

5 K

N

132


Pre-cut pentagonal section nylon line


Ø 2,4 mm Orange50 0000 930 3316 Mowing line, Ø 2.4x203 mm, pentagonal section

100 0000 930 3317 Mowing line, Ø 2.4x203 mm, pentagonal section

Ø 3,0 mm Yellow50 0000 930 3318 Mowing line, Ø 3x203 mm, pentagonal section

100 0000 930 3319 Mowing line, Ø 3x203 mm, pentagonal section

681K

T27

9 K

N

Pre-cut Serrated Line


Ø 2,0 mm Bronze48 0000 930 3503 Serrated mowing line Ø 2x195 mm

Ø 3,0 mm Silver48 0000 930 3504 Serrated mowing line Ø 3x185 mm

Ø 4,0 mm Gold48 0000 930 3505 Serrated mowing line Ø 4x215 mm

68

1K

T87

4 K

N

133


Balancer, Sharpening Instructions and Sharpening ToolsNo. Part No. Quan-

tityPart Name

68

1K

T9

38

KN

1

1 5910 850 2600 1 Balancer (B)


Part Name

681K

T937 K

N

1,2,3

4

5

1 0457 342 2629 1 Sharpening template for Brush knife250-3 (B)



4 4020 890 5500 1 Sharpening template 250-3, 300-3,350-3 (B)

5 4020 890 5501 1 Sharpening template 305-2 (B)

134



tityPart Name

681K

T942 K

N

1

2

1 0814 212 3310 1 Taper square file 200-3


2 0711 490 7860 1 File handle A100


Part Name

681K

T939 K

N

1

3

2

1 0814 252 3356 1 Taper square file 150x16x2.7



3 0811 490 7860 1 File handle A100

135



tityPart Name

68

1K

T9

40

KN

1

2

1 5605 772 5506 1 Round file Ø 5.5x200 mm

2 0811 490 7860 1 File handle A100


Part Name

3

2

2

68

1K

T9

41

KN

1 4

5

6

3

1 5605 750 4343 1 File holder for chisel-tooth circular sawblades ☐ 2 - 5

2 5605 752 8300 2 Bow

3 5605 752 7700 2 Nut

4 5605 772 5506 1 Round file Ø 5.5x200 mm

5 0811 490 7860 1 File handle A100

6 4020 893 5000 1 Saw set

136



tityPart Name

681K

T943 K

N

1

2

1 0811 421 8971 1 Triangular file

2 0811 490 7860 1 File handle A100

137


Transport guard for metal cutting bladesNo. Part No. Quan-

tityPart Name

1

2

68

1K

T7

08

KN

1 4116 790 3901 1 Transport guard Ø 350 ☐ 2

2 4116 792 4300 1 Clamping wire


Part Name

1

2

68

1K

T7

09

KN


2 4119 792 4305 1 Clamping wire

138


Transport guard for metal cutting bladesNo. Part No. Quan-

tityPart Name

2

1681K

T702 K

N


2 4119 792 4300 1 Clamping wire


Part Name

681K

T982 K

N

1

1 0000 790 3901 1 Transport guard

139

STIHL KombiSystem KM 55, 56, 85, 90, 94, 100, 110, 130

STIHL KombiSystem Attachments

681K

T945 K

N

➅

➂

➄➃

➇➊

➆

➇

➇

➇➀ ➁

BC-KMBF-

KM

HL-KM

(30°

)HL-

KM (1

35°)

FH-K

M (135

°)

SP-KM

HL-KM

(0-9

0°)

HL-KM

(0°)

FH-K

M (0-9

0°)

HT-KM

BG-KM

FBD-K

M

FCS-K

MFC

B-KM

FS-K

M

FS-K

M

FSB-KM

KB-KM (4

601)

KW-K

M (460

1)

140

STIHL KombiSystemKM 55, 56, 85, 90, 94, 100, 110, 130

STIHL KombiSystem Attachments

① with grass cutting blade or brush knife② with mowing head③ drive tube extension (carbon fiber, 1 m): approved for HT-KM and HL-KM④ drive tube extension (steel, 1 m): approved for HT-KM⑤ drive tube extension (steel, 0.5 m): approved for HT-KM, HL-KM and SP-KM⑥ angle drive: approved for HT-KM and HL-KM 0°⑦ only the FCS-KM with flexible drive shaft is approved for the KM 130 R with paper air filter and a cut-off speed of 9,500 rpm⑧ no longer available⑨ original sales designation➊ FBD-KM is approved only for the KM 130 R with paper air filter and a cut-off speed of 9,500 rpm

BC-KM

FH-KM0..90°

HL-KM30°

0-90°

KW-KM(4602)

FS-KM①

FS-KM②

FSB-KM

BF-KM

BG-KM

FCB-KM

FCS-KM

FH-KM

135°

HL-KM0°

HL-KM

135°

HT-KM

KB-KM

KW-KM

(4601)

SP-KM

FBD-KM

KM 55 ● ● o ● o o o ● — o — — — — —KM 56 ● ● o ● o o o ● — o — — — — —KM 85 ● ● o ● o o o ● — o — — — — —KM 90 ● ● o ● o o o ● — o — — — — —

KM 100 ● ● o ● o o o ● — o — — — — —KM 110 ● ● o ● o o o ● — o — — — — —KM 130 ● ● — ● o o o ● — o — — — — —

KM 55 R ● ● ● ● ● ● ● ● ● ● ● ● ● ● —KM 56 R ● ● ● ● ● ● ● ● ● ● ● ● ● ● —KM 85 R ● ● ● ● ● ● ● ● ● ● ● ● ● ● —KM 90 R ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

KM 94 R ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●KM 100 R ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●KM 110 R ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●KM 130 R ● ● — ● ● ● ● ● ● ● ● ● ● — ➊

002B

A00

3 K

002B

A00

1 K

● = approvedo = limited ergonomic

suitability— = not approved

(C)

141

STIHL KombiSystem FS 55 T, 85 T, FR 85 T, 130 T

KombiTools for Models with Split Drive Tube

681K

T946 K

N

➅

➆

➂ ➃➄

➇

➇➈

➇➈ ➇➈

➇➈➇➈

➇➇➈

➇➇➈

➇

➀

➁

BC-KM

BF-KM

HL 30

°HL-

KM 1

35°

HL-KM

30°

FH-K

M 135

°

SP-KM

FH-K

M (0...

90°)

HL (0

-90°

)HL-

KM 0°

HL 0°

HTHL-KM

(0-9

0°)

FH

HT-KM

BG-KM

FCS-K

MFC

SFC

B-KM

FCB (F

C)

FS-K

M

FS-K

M

FSB-KM

KB-KM (4

601)

KW-K

M (460

1)

142

STIHL KombiSystemFS 55 T, 85 T, FR 85 T, 130 T

KombiTools for Models with Split Drive Tube

① with grass cutting blade or brush knife② with mowing head③ drive tube extension (carbon fiber, 1 m): approved for HT-KM and HL-KM④ drive tube extension (steel, 1 m): approved for HT-KM⑤ drive tube extension (steel, 0.5 m): approved for HT-KM, HL-KM and SP-KM⑥ angle drive: approved for HT-KM and HL-KM 0°⑦ only the FCS-KM with flexible drive shaft is approved for the KM 130 R with paper air filter and a cut-off speed of 9,500 rpm⑧ no longer available⑨ original sales designation➊ FBD-KM is approved only for the KM 130 R with paper air filter and a cut-off speed of 9,500 rpm

FCS (FC)FCB

FH HL 0° HL30°

0..90°

HT KW(4602)

BC-KM FH-KM0..90°

HL-KM30°

0..90°

KW-KM

(4602)

FS-KM①

FS-KM②

FSB-KM

BF-KM

BG-KM

FCS-KM

FCB-KM

FH-KM

135°

HL-KM0°

HL-KM

135°

HT-KM

KB-KM

KW-KM

(4601)

SP-KM

FS 55 T ● ● o ● o o o ● — o — — — —FS 85 T ● ● o ● o o o ● — o — — — —FS 55 RT — ● ● — ● ● ● — ● — ● ● ● ●FS 85 RT — ● ● — ● ● ● — ● — ● ● ● ●

FR 85 RT — ● ● — ● ● ● — o — ● — — —FR 130 T — ● ● ● ● ● ● ● o ● ● — — —FS 55 RT ● ● ● ● ● ● ● ● ● ● ● ● ● ●FS 85 RT ● ● ● ● ● ● ● ● ● ● ● ● ● ●

FR 85 RT ● ● ● ● ● ● ● ● o ● ● — — —FR 130 T ● ● ● ● ● ● ● ● o ● ● — — —

002B

A00

3 K

002B

A00

2 K

002B

A00

1 K

STIHL KombiTool● = approvedo = limited ergonomic suitability— = not approved

STIHL KombiTool(C)

Original sales designation:Interchangeable attachment(C)

143

STIHL Tools and Attachments

Gearbox attachments for STIHL Power Tools

68

1K

T9

47

KN

HL 135°

HL 30°

HL 0-90°

FH 0-90°

FH 135°

HL 0°

HT

SP 10

SP

BF

➂

➁

➄

➄

➄

➀

➄➅ KW (4602)

FS FS

FCS BC 35; BC

Original salesdesignation:Interchangeableattachment

BC 35(BC)

FH(0-90°)

HL(0°)

HL30°

HL(0-90°)

KW(4602)

BF FCS FH(135°)

HL0°

HL135°

FS➀

FS➁

HT SP SP 10

FS 85 ➃ ● o ● — o o ● ● — — — —FS 90 ● o ● — o o ● ● — — — —FS 100, 110 ● o ● — o o ● ● — — — —

FS 120, 200 ● — — — — — ● ● — — — —FS 130 ● — — — — — ● ● — — — —FS 240, 250 ● — — — — — ● ● — — — —

002B

A00

1 K

STIHL Gearbox Attachments● = approvedo = limited ergonomic suitability— = not approved

144



BC 35(BC)

FH(0-90°)

HL(0°)

HL(30°)

HL(0-90°)

KW(4602)

BF FCS FH(135°)

HL 0° HL 135° FS➀

FS➁

HT SP SP 10

FC 95, 110 ● ● ● ● ● ● ● ● — ● ● ●

FH 75 ● — ● ● ● ● — — — ● ➊ ●FR 85 ● ● ● ● ● ● ● ● ● — ➊ ●FR 350, 410, 450 ● — — — — — ● ● — — — —FR 460, 480 ● — — — — — ● ● — — — —

FS 85 R ● ● ● ● ● ● ● ● ● ● ➊ ●FS 90 R ● ● ● ● ● ● ● ● ● ● ● ●FS 100 R, 110 R ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋FS 120 R, 200 R ● — — — — — ● ● — — — —

FS 130 R ● — — — — ● ● ● ● — ● —FS 240 R, 250 R ● — — — — — ● ● — — — —FT 100 — — — — — — — — ● — — —HL 75 ● ● ● ● ● ● — — ● ● ➊ ●

HL 75 K — — — ● ● ● — — — — ➊ ●HL 95, 100 ● ● ● ● ● ● — — ● ● ● ●HL 95 K, 100 K — — — ● ● ● — — — — ● ●

KA 85 R ● ● ● ● ● ● ● ● ● ● ➊ ●KR 85 ● ● ● ● ● ● ● ● ● — ➊ ●KW 85 ● — ● ● ● ● — — — ● — —SP 81 ● — ● ● ● ● — ● — ● ● ●

FC 95, 110 ● ● ● ● ● ● — ● — ● ● ●FH 75 ● — ● ● ● ● — — — ● ➊ ●FR 85 ● ● ● ● ● ● — ● ● — ● ●FR 350, 410, 450 ● — — — — — — ● — — — —

FR 460, 480 ● — — — — — — ● — — — —FS 85 R ● ● ● ● ● ● — ● ● ● ➊ ●FS 90 R ● ● ● ● ● ● — ● ● ● ➊ ●

FS 100 R, 110 R ➋ ➋ ➋ ➋ ➋ ➋ — ➋ ➋ ➋ ➋ ➋FS 120 R, 200 R ● — — — — — — ● — — — —FS 130 R ● — — — — ● — ● ● — ● —FS 240 R, 250 R ● — — — — — — ● — — — —

FT 100 — — — — — — — — ● — — —HL 75 ● ● ● ● ● ● — — ● ● ➊ ●HL 75 K — — — ● ● ● — — — — ➊ ●HL 95, 100 ● ● ● ● ● ● — — ● ● ● ●

HL 95 K, 100 K — — — ● ● ● — — — — ● ●KA 85 R ● ● ● ● ● ● — ● ● ● ➊ ●KR 85 ● ● ● ● ● ● — ● ● — ➊ ●KW 85 ● — ● ● ● ● — — — ● ➊ ●

SP 81 ● — ● ● ● ● — ● — ● ● ●

002B

A00

2 K

002B

A00

3 K



145



BC 35(BC)

FH(0-90°)

HL(0°)

HL(30°)

HL(0-90°)

KW(4602)

BF FCS FH(135°)

HL 0° HL 135° FS➀

FS➁

HT SP SP 10

HL 75 — — — ● — — — — ● — ➊ ●

HL 75 K — — — ● — — — — — — ➊ ●HL 95, 100 — — — ● — — — — ● — ● ●HL 95 K, 100 K — — — ● — — — — — — ● ●HT 70 — — — — — — — — ● — ➊ ●

HT 75 — — — ● — — — — ● — — —HT 100 — — — ● — — — — ● — ● ●HT 130 — — — ➋ — — — — ● — ● —HT 101, 131 — — — — — — — — ● — — —

SP 90 — — — — — — — — — — ● ●SP 92 — — — — — — — — — — ● ●SP 81

002B

A02

3 K

N

— — — — — — — — — — ➊ ●

002B

A13

1 K

N



① with grass cutting blade or brush knife② with mowing head③ angle drive: Approved for HT and HL 0° only④ Not approved for FS 85 from serial No. 1 49 709 301 to 1 53 148 868 and FS 85 RX⑤ No longer available⑥ Original sales designation➊ approved only from serial No. 1 62 850 000, 2 63 970 000, 3 60 420 000➋ Not approved for FS 100 RX, 110 RX

146

STIHL MultiSystem

MultiTools for STIHL MM 55

681K

T948 K

N

BF-MM RL-MM

BK-MMFC-MM

KW-MMKB-MM MF-MM

FS-MM

MM 55

BF-MM BK-MM FC-MM FS-MM MF-MM RL-MM KB-MM KW-MM

● ● ● — ● ● — —

— — — — — — ● ●

— — — ● — — — —

Gearboxorientationdependent onMultiTool

● = approvedo = limited ergonomic suitability— = not approved

147

STIHL MultiSystem

MultiTools for STIHL MM 55BF-MM BK-MM FC-MM FS-MM MF-MM RL-MM KB-MM KW-MM

4601 713 4500

● ● ● — — ● — ●

681K

T438 K

N

4601 710 8100

● ● ● — — ● — ●

4601 007 1009

— — — — ● — ● ●

681K

T883 K

N

4144 710 8117

— — — ● — — — —

Use of deflectordependent onMultiTool

● = approvedo = limited ergonomic suitability— = not approved

148

Notes

Key to symbols:□ = including item No.● = approved(●) = approved only for loop handle (R) with barrier bar and deflector— = not approved(A) = not illustrated(B) = option(C) = no longer available from factory(D) = not available as separate itemØ = diameter

English

0456 681 0101Printed on Recycled Paper

Documents

FS Schneidwerkzeuge GB - STIHL B.Net⌀350-3 40007134100 ⌀350-3 41107134100 ⌀270-2 40007133903 ... Not approved for FR 106, 108 Deflector for AUS, NZ see illustration marked "AUS,