ProjectSub Sea FRP Mud Mats Location Aberdeenshire ClientTalisman Energy ContractorTechnip MarketSubsea PXPSCCH175 (Completed FRP Mud Mat awaiting delivery to site) Pipex px GRATING AND FLOORING SYSTEMS Pipex px SAFPLANK and SAFDECK This document is Pipex px V1. Sarah Gill August 2012 Scope of WorkPipex px supplied and fabricated 2 sections of FibreReinforced Polymer (FRP) deck for the purpose ofstabilisingsubseapipework145mbelowsealevel. These mud mats consisted of internal FRP box section beamswhichweresandwichedbetweentwoexternal FRPplates,2400mmlongx1829mmwidex121mm thick, and coated in Yellow Ral 1004 Vinylester Resin. Thematsweredesignedtosupportsub-seavalve equipmentonsoftundulatingseabedconditionsin the North Sea. Date of InstallationJune 2010 Unique Selling Points Pipex px Mud Mats require no cathodic protection Pipex px FRP structures are lightweight, with adensity of approx. 2. This makes FRP structuressimplerandsafertohandleanddeployoffshore, through the wavezone or sub sea The mud mats are easily handled using soft stropsFlood holes were provided to maximise stability while being positioned sub sea PXPSCCH175 (Lightweight deck during fabrication at Plymouth Factory)