Embed Size (px)
Citation preview
FRONTLINE
www.vallfirest.com
HONDA MOTOR 9CV
mod. AR1064 50 bar/105 L.min
mod. AR813 40 bar/76 L.min
13CV OTHEROPTIONS
HIGH-PRESSURE PUMP
KITS WITH STRUCTUREThese vehicles are even more effective because of the tool carrying structure accompanying the motor pump kits with hand tools, drip torches, chainsaws, waterpacks, firefighting backpacks, etc.Everything is well-organized in the equipment box and on the equipment carrying tray.
The tanks are made to order to adapt to your pick-up and towing vehicles
These multifunctional fire extinction Kits are designed for pickup vehicles. They fit all makes and models. The kit measurements are universal. Easy assembly.
TECHNICAL FEATURES OF THE FIRE EXTINCTION KIT
Epis box with two side doors and locksEquipment carrying tray
Dynamic upper tool structureWeight: 72 Kg
SLIP ON UNITS
HIGH PRESSURE PUMP
· Motor 9 o 13 HP.· High-pressure 4-membrane pump with 40 o 50 bar.· Quick-attack winder with 70 meters rubber hose to 80 bar. *Not included· T-form 450 liters tank, made of 2 mm stainless steel, with two breakwalls inside. · Pressure controller with a barometer and shutoff valve.· Color to be indicated or stainless steel color.· High pressure nozzle with jet or vain flow functions. *Included.· 5 m protective absorption sleeve. *Included· Upper loading nozzle for feed vehicles.· Weight: 157 Kg.
www.vallfirest.com
9CV 13CV
mod. RD/501314 bar/200 L
mod. RD/501316 bar/248 L
SLIP ON UNITS
LOW-PRESSURE PUMPThese multifunctional fire extinction Kits are designed for pickup vehicles. They fit all makes and models. The kit measurements are universal. Easy assembly.
· Motor 9 o 13 HP.· Low-pressure 4-membrane pump with 14 or 16 bar. with 248l/min.· Quick-attack winder with 50 meters rubber hose to 25mm. *Rubber hose not included· T-form 450 liters tank, made of 2 mm stainless steel, with two breakwalls inside. · Pressure controller with a barometer and shutoff valve.· Color to be indicated or stainless steel color.· 5 m protective absorption sleeve. *Included· Upper loading nozzle for feed vehicles.· Low pressure nozzle with jet or vain flow functions. *Nozzle not included.· Weight: 157 Kg.
KITS WITH STRUCTUREThese vehicles are even more effective because of the tool carrying structure accompanying the motor pump kits with hand tools, drip torches, chainsaws, waterpacks, firefighting backpacks, etc. Everything is well-organized in the equipment box and on the equipment carrying tray.
The tanks are made to order to adapt to your pick-up and towing vehicles
Epis box with two side doors and locksEquipment carrying tray
Dynamic upper tool structureWeight: 72 Kg
TECHNICAL FEATURES OF THE FIRE EXTINCTION KIT
HONDA MOTOR OTHEROPTIONS
LOW-PRESSURE PUMP
9CV 13CV
mod. RD/501314 bar/200 L
mod. RD/501316 bar/248 L
LOW-PRESSURE PUMP WITH FOAM SYSTEM These multifunctional fire extinction Kits are designed for pickup vehicles. They fit all makes and models. The kit measurements are universal. Easy assembly.
SLIP ON UNITS (FOAM SYSTEM)
KITS WITH STRUCTUREThese vehicles are even more effective because of the tool carrying structure accompanying the motor pump kits with hand tools, drip torches, chainsaws, waterpacks, firefighting backpacks, etc. Everything is well-organized in the equipment box and on the equipment carrying tray.
The tanks are made to order to adapt to your pick-up and towing vehicles
Epis box with two side doors and locksEquipment carrying tray
Dynamic upper tool structureWeight: 72 Kg
· Motor 9 o 13 HP.· Low-pressure 4-membrane pump with 14 or 16 bar. with 248l/min.· Quick-attack winder with 50 meters rubber hose to 25mm. *Rubber hose not included· T-form 450 liters tank, made of 2 mm stainless steel, with two breakwalls inside. · Pressure controller with a barometer and shutoff valve.· Color to be indicated or stainless steel color.· 5 m protective absorption sleeve. *Included· Upper loading nozzle for feed vehicles.· Viper Foam PVB1560. *Included.· Foam Kit KUGEEL 100Its 3%.*Included.· Weight: 157 Kg.
TECHNICAL FEATURES OF THE FIRE EXTINCTION KIT
HONDA MOTOR OTHEROPTIONS
LOW-PRESSURE PUMP
www.vallfirest.com
SLIP ON UNITS
SAMPLE: LOW PRESSURE FIRE PUMP OVER NISSAN NAVARA
[email protected] The colors and details of Vallfirest products may vary, always due to improvements and our efforts to innovate.
EXTINCTION KIT IN A TOW
Tank`s capacity is from 450 to 600 Liters of water. Other capacities can be manufactured upon request. Tank is made of Inox. Water entry port and water output port for fire pump supply. Visible tube controlling water level.
TECHNICAL FEATURES (OTHER CONFIGURATIONS ARE ABAILABLE UPON REQUEST)
Motor pump of high pressure of manual startPump Honda 9HP, model GX 2702,9 hours autonomous mode6 liters tank capacity2-turbine pump under work pressure of 10 barFlow of 40 l/m and water output of 50mm x 25mm x 25mmSystem of fire Chemicals with a beater inside the tankAbsorption Kit: 45 mm entry port with 7,5 m hose and a drain valve.Quick-attack rotary joint with 100 meters hose of 25 mm. diameter, GOMDUR - 4-K, in roll of 20 meters, break pressure of 90 barWeight: 157 kg.
www.vallfirest.com
218 cm
100 cm
30º20º
84 cm
16 cm
116
cm
VF DRONSTER V3.2
VF DRONSTER is a machine specially designed to perform indirect forest fire attacks.VF Dronster offers an opportunity for better forest management as far as cleaning forest, forest fire prevention, prescribed burns and wildland firefighting all while minimizing any harm to protected species due to its flexibility and cost reduction.
VF DRONSTER
CREATING LINES REMOTE OPERATION CONTROL
NUMEROUS APPLICATIONS
DESIGNED FOR WILDLAND FIREFIGHTING
VF Dronster is provided with a hydraulic platform with possibility to fix various tools according to the features and needs of the terrain, as for example snow blade, front loades bucket, sprayer, trencher, forks, etc. Also can be provided with a weather station, gps, càmeras, etc.
MAIN TOOLS
OTHER TOOLS
FORESTRY HEAD WITH ROTARY HAMMER
LENGTH 80 CMWEIGHT 155 KGPRESSURE 250 BARDISCHARGE 18 CC/REV 2.700 RPM 48 L/MINPOWER 25 HP
MOTION BY BELTFRONT OPENING DOOR BY REMOTE CONTROLSECURITY CHAIN AGAINST EJECTED PRODUCTSCAN ATTACK FUEL WITH A DIAMETER OF OVER 8 CMWORKING ON ROTHERMEL 3, 4, 5, 6 AND 7 OF FUELS
LAND BLADE
For thick fuelsof 10h, 100h and 1000h serves to put aside and drag the rests of the fuel, this way crea-ting the line of defence.
PICKUP TRUCK | VAN | HELICOPTER
TRANSPORTING | ACCESSIBILTY
Allows access to areas which are not prepared for people as well as for work in the majority of difficult to access areas.
FUEL MODELS OF ROTHERMEL
The main aim of this machine if to increase safety for those people who work with fires, give provide support for fire prevention fire prevention and extinction maneuvers which are performed nowadays using hands tools and heavy equipment. VF Dronster enables quick work for higher productivity level, which ensures great forest fires control efficiency.
The great variety of terrain in this sector is a real challenge for any machine. VF Dronster is provided with dimensions adjusted to the needs of these terrains. It functions at inclinations of more than 30º. It can work at a 20º inclination angle of frontal attack and the 16 cm over the ground means it overcomes obstacles such as stones, trunks and small steps.
MODEL 3 MODEL 4 MODEL 5
MODEL 7MODEL 6
The colors and details of Vallfirest products may vary, always due to improvements and our efforts to innovate.
www.vallfirest.com
This model`s water drops are lightweight and their diameter is smaller in order to reach greater heat absorption.
When the water passes through the coupling and the stainless steel cylinder, it hits against the frontal cycloid-shaped shield, so that the small slot between the cylinder and the shield allow the stream to pour out, creating a protective shade of water.
The volume of water poured out and the formation of the shade of water depend directly on the water pressure. In this case, as we are working with a high-pressure and low-consumption nozzle, the optimal working pressure is between 20 and 22 bar with the consumption of 120 l/m.
Cycloid-shaped shield: diameter of 25, maximum working pressure up to 35 bar.Barcelona coupling UNE 23400.Y-shaped particle filter with stainless steel mesh.Semicircular yellow reflecting high visibility sticker.
Instructions for use:The nozzle should be connected to a hose and placed on flat ground.It should work under the range of pressure as indicated above.The water is poured out to create a half-moon-shaped shade of water.
Material: Stainless steelDimensions: 10 x 12 x 20 cm.Weight: 900 grCoupling: Barcelona (ѕ “) male thread UNE 23.400 (aluminum).Filter: Brass 3/4 with stainless steel mesh.
SELF-PROTECTION NOZZLE
Optimal conditions of use:Working Pressure: 20-22 BarHose: 10-20 m of 25 mm connector Barcelona UNE 23.400Consumption: 120 l / mScreen width: 11mScreen height: 4 m (screen dimensions, liters per minute and optimal drop size for added pro-tection and heat absorption in a self-defense maneuver are given based on these conditions).Warranty 5 years.
If trapped in a forest fire, the possibilities of surviving the thermal shock of the fire depend on the safety protocols carried out and the equipment available.
At Vallfirest, we’ve developed a fireproof blanket kit which is adaptable to light vehicles and trucks used for fire extinguishing. The purpose of this product is to provide thermal insulation inside cabins while trapped.It is most highly effective with external sprinkler systems to prevent window glass from being destroyed and the use of assisted breathing devices inside the vehicles.
The blanket kits are designed and custom-created for each vehicle model. They are easy to assemble and can be moved from one vehicle to another in the event of substitution.
Three Layer Blankets: Exterior Layer: Aluminum Middle Layer: Fiberglass Interior Layer: TECSTAR Thermal shock > 300ºC Ignition at 435ºC in 100% O2,
Max. continuous operating temperature 260ºCCE Standards (Levels: A1, B1, C4)UNE - EN ISO9151:1995UNE - EN ISO11612:2010UNE - EN ISO6942:2002
TECHNICAL FEATURES
VF FIRE BARRIER CURTAINS
www.vallfirest.com
FIRE PUMP
WICK 4200 FIRE PUMPOptions
WICK 4200 13H· 4-stroke 13 HP.· Pressure: 10 Bar - 240 L/min 20 Bar - 85 L/min 25 Bar - 22 L/min
WICK 4200 18BS·4-stroke 18 HP.·Pressure: 10 Bar - 355 L/min 20 Bar - 215 L/min 25 Bar - 140 L/min
WICK 4200 23BS· 4-stroke 23 HP.· Pressure: 10 Bar - 363 L/min 20 Bar - 240 L/min 25 Bar - 170 L/min
Heliskid is an all-new maneuvering tool combined for helicopters used for forest fire work. It is a compact and versatile fire extinguishing kit that can be transported by ground or air for easier direct attack water line maneuvers in remote areas that cannot be accessed with today’s extinguishing systems using trucks or pick-ups with standard kits.
It is designed to equip a light pick up vehicle with high-performing water and fire pump features. Because of their speed and flexibility, pick up vehicles offer immense forest fire-fighting possibilities yet with very small loads. The Heliskid gives a pick up truck the possibility of deploying a kit with a capacity for 2000 liters and a high-performing motor pump.
The tank is unique in that it can be supplied using aerial resources, thereby considerably reducing the time needed by standard trucks which use other trucks to load their water tanks.
PURPOSEThe Heliskid can be helitransported to remote areas pick up trucks can’t go so a tank can be located in a strategic point for extinguishing work. The purpose is to quickly deploy the structure/deposit wherever needed to be filled with water from a helicopter in inaccessible areas and pressure-feed the water from the tank through the fire pump and hoses.
COMPONENTSThe Heliskid is comprised of a light aluminum structure that is capable of bearing the load of up to 2000L of water. It features 4 telescopic legs to support the Heliskid on the ground when full without affecting the pick up vehicle.It has a fold-down canvas tank with a capacity for 2000 liters and a 4-phase fire pump with a four-stroke engine and independent fuel tank. In addition, it includes 3-4 hose-carrying packs to create a total of 240-320 meters of hose.
TELESCOPICSTRUCTURE
STAND WITH A BALL JOINTAND ANTI-SLIP BASE
MAIN ALUMINUMSTRUCTURE
12L FUEL TANK
HELISKID
4 LIFTINGPOINTS
2000L FOLD-DOWN TANK
The colors and details of Vallfirest products may vary, always due to improvements and our efforts to innovate.
ASSEMBLY SEQUENCE TO WORK
1. FOLDED HELISKID: compact for transport with any pick up model. Also is possible to carry 2 heliskid more by tow.
2. SUPPORT: 4 telescopic legs must to be assembled to adapt skid unit to the ground, get the vehicle free and be ready to load water.
4. DEPLOYMENT TO WORK: Canvas tank must be deployed to let helicopters fill it by water discharge. After that
3. (OPTIONAL) ELEVATION: Heliskid can be transported by helicopter to innaccesible areas where vehicles can’t arrive.
www.vallfirest.com
1300 mm
1300 mm
830
mm
The colors and details of Vallfirest products may vary, always due to improvements and our efforts to innovate.
TECHNICAL CHARACTERISTICS · Compact Aluminum structure. Folded size: 130x130x83cm· Telescopic tubular legs for terrain adapt.· 2000 liter canvas fold-down tank and detachable structure for transportation.· Equipped with 3-4 hose paks for a total of 240-320 hose meters.· Portable two stage, high pressure fire pump Wick 4200, options (13HP - 18HP - 23 HP).· 12 L fuel tank.· 4 lifting points for helitransport.· Personnel recommended for assembly and use: a minimum of 2 people.· Weight: 350 kg without water / 2350 kg with a full tank.
PICK UP ADAPTATIONThe kit dimensions are adjusted for adaptation to most pickups such as the double-cab Nissan Navara. It occupies all of the back of the vehicle for more volume capacity as a water tank.
FOLDED VIEW DEPLOYED VIEW
HELISKID
SOCIAL MEDIA CERTIFICATIONS
QUALITY POLICYThe VALLFIREST TECNOLOGIAS FORESTALES S.L quality policy, adopted by the company management, aims to satisfy our customers’ needs, expectations and requirements as well as to reach efficient com-pany operation in order to strengthen our competitiveness.
In order to earn the complete confidence of our customers and to meet their requirements, the com-pany engages the most competent manpower and technical experts, following applicable regulatory requirements. So, the company’s organization meets the requirements of ISO 9001:2008, and encoura-ges the use of planning techniques, control and prevention in order to ensure quality when performing services.
The company values the permanent involvement of all its staff, and considers it to be its most valuable asset. We support the continuing professional development of our staff and promote their communica-tion and teamwork to encourage their active participation in the implementation of new processes and problem solving in order to achieve continuous improvements in quality and productivity.
The company also considers its suppliers’ and subcontractors’ most loyal cooperation of utmost im-portance and this requires the same degree of commitment and quality in business competition and, therefore, the evaluation of selected criteria such as their overall organization and their products and services.
The deployment of this quality policy is accomplished by establishing goals and objectives as well as the structure of the quality system, which describes the procedures that are developed in addition to the action plans to achieve them.
Vallfirest Tecnologías Forestales SLC/ Ignasi Barraquer 4-6, 08460 Santa Maria de Palautordera (Spain)T. 938 678 779 - F. 936 889 625
