Upload
sankarsuper83
View
213
Download
0
Embed Size (px)
Citation preview
7/28/2019 Front Page of Vijay (1)
http://slidepdf.com/reader/full/front-page-of-vijay-1 1/5
7/28/2019 Front Page of Vijay (1)
http://slidepdf.com/reader/full/front-page-of-vijay-1 2/5
SATHYABAMAUNIVERSITY(Established under Section 3 of UGC Act, 1956)
JEPPIAAR NAGAR, RAJIV GANDHI SALAI, 600 119
www.sathyabamauniversity.ac.in
DEPARTMENT OF MECHANICAL ENGINEERING
BONAFIDE CERTIFICATE
This is to certify that this Project Report is the bonafide work of
Vijayamudhan.E(3045273),Sundaramoorthy.S(3045246),who carried out the project
entitled “TOOL RUN OUT DETECTION IN CNC MACHINES” under my supervision
from June 2013 to September 2013.
Internal GuideMr. P.AMITH KISHORE, M.E.,
Head of the Department (Academics)Dr.A .KRISHNAMOORTHY, M.E., Ph.D.,
Submitted for Viva voce Examination held on_____________________
Internal Examiner External Examiner
7/28/2019 Front Page of Vijay (1)
http://slidepdf.com/reader/full/front-page-of-vijay-1 3/5
DECLARATION
I Vijayamudhan.E (3045273) hereby declare that the project entitled “TOOL RUN
OUT DETECTION IN CNC MACHINES” done by me under the guidance of
Mr.P.Amith Kishore, M.E., Department of Mechanical Engineering is submitted in
partial fulfillment of the requirements for the award of Bachelor of Engineering
degree in Mechanical Engineering
DATE:
PLACE: Chennai SIGNATURE OF THE CANDIDATE
7/28/2019 Front Page of Vijay (1)
http://slidepdf.com/reader/full/front-page-of-vijay-1 4/5
ACKNOWLEDGEMENT
The satisfaction and elation that accompany the successful completion of any
task would be incomplete without the mention of the people who have made it a
possibility. It is my great privilege to express my gratitude and respect to all those
who have guided me and inspired me during the course of the project work.
First and foremost, I would express my sincere gratitude to our respected
Chancellor Col. Dr. JEPPIAAR, M.A., B.L., Ph.D., and also my sincere thanks to
our beloved Directors Dr. Marie Johnson, B.E.,M.B.A., M.Phil., Ph.D., and
Dr. Mariazeena Johnson, B.E., M.B.A., M.Phil., Ph.D., for providing me the
necessary facilities for the completion of my project. Also ,I acknowledge our
Vice Chancellor Dr. B.Sheela Rani, M.S(By Research)., Ph.D., for her constant
support and endorsement
I would like to express my gratitude to Dr. A. Krishnamoorthy M.E., Ph.D.,
Professor and Head (Academics),Department of Mechanical Engineering and our
sincere thanks to our Internal guide Mr. P.Amith Kishore M.E., Asst.Professor,Department of Mechanical Engineering for having a constant source of support and
encouragement for the completion of this project.
I would like to thank my family members and friends for their encouragement
and support. Eventually, I express my sense of gratitude to one and all who directly
and indirectly extended their valuable help and guidance in completing this project in
a successful manner.
7/28/2019 Front Page of Vijay (1)
http://slidepdf.com/reader/full/front-page-of-vijay-1 5/5
TOOL RUN OUT DETECTION IN CNC MACHINES
Submitted in partial fulfillment of the requirements for the award of Bachelor of Engineering degree in Mechanical Engineering
by
SUNDRAMOORTHY.S (Reg.No.3045246)VIJAYAMUDHAN.E (Reg.No.3045273)
DEPARTMENT OF MECHANICAL ENGINEERING
SATHYABAMA UNIVERSITY
JEPPIAAR NAGAR, RAJIV GANDHI SALAI,
CHENNAI – 600119,TAMILNADU.
SEPTEMBER 2013