Step 1

Once the installation is complete and connectionto the home network and the MyInfinityTouchserver has been established, touch the Infinity®System Control anywhere on the Home screen.

Step 2

Select Menu.

Step 3

Press the down arrow in the lower right handcorner of the first menu screen in order to getto the second menu screen.

Step 4

From the second menu screen,select the Wireless icon.

Infinity® System Control Registration Instructionsfrom the Infinity System Control

Step 6

Write down the serial number, MAC addressand PIN information included on this screenas you will need this information when you login to the www.myinfinitytouch.com website.

Note:If you do not wish to write this information down, youcan also take a photo of this screen using your smartphone to use as a visual reference when you areentering the website.

Note:You can check the status of the connections to the homenetwork and MyInfinityTouch server by touching the “viewremote access status” option above the “MyInfinityregistration info” shown in Step 5.

Step 5

From the Wi-Fi Set-Up screen, select theview MyInfinity info option.

Infinity® System Control Registration Instructionsfrom the www.myinfinitytouch.com website

Step 9

Select a user name and password.Then enter the main contactperson’s information.

Step 10

Enter the location name and addressfor your system.

Step 11

Enter the primary contact’s emailaddress to receive system notificationsand alerts. You may also select aservicing dealer from our database.To find a dealer click on the Select aDealer link. Enter the dealer’s name ortype in your postal code to find aCarrier® dealer near you.

Step 12

Confirmation of completing theregistration process. Upon completionyou will be logged in. Click on the MyLocations link at the top of the page toview your location(s) and system(s).

© Carrier Corporation 9/2017

SYSTXCCITC-01R1

Step 7

From your computer go to thewww.myinfinitytouch.com websiteto register your control. Click onthe My Infinity link at the top of thepage, then click on the Sign Upbutton at the bottom in the SignMe Up box.

Remember to have the informationthat you collected from Step 6 withyou in order to complete theregistration process.

Step 8

Enter the serial number, system MACaddress and PIN for your control. Besure to read and agree to the Termsof Use.

Note:Once the initial Registration hasbeen completed, additionalsystems or locations may beadded on the My Locations page.