from Edition II Prices valid until September 30, 2018 · 01753 685926 [email protected] Avenews from Edition II Prices valid until September 30, 2018 The highly adaptable Laser

01753 685926 [email protected]

Avenews from

Prices valid until September 30, 2018Edition II

The highly adaptable Laser Tools 2856 Survivor Socket is specially designed to grip on to any stud from 9mm to 22mm and will get you out of a tight spot every time. • 1/2" diameter • Special locking design removes any size nut between 9-22mm

• Manufactured from chrome vanadium

• External diameter 31.75mm

Survivor socket

NOW ONLY

£9.99

Usual price: £17.50

When all else fails this innovative, highly adaptable socket could get you out of a tight spot. • With quick chuck end for use with drill (not suitable for impact drills)

• Size range 9-21mm • Fits most designs of nuts and bolts including Spline, Torx® and Hex

• Socket manufactured from chrome vanadium

• Rotating collet for ease of use

Survivor socket with quick chuck end

NOW ONLY

£10.99

Usual price:

£15.98

The Powerblade II features: • Two-colour blade with measurements printed on both sides – hi-viz fluorescent yellow on one side, white on the other

• Magnetic tip for easier one person measuring

• Ergonomically designed case with molded rubber grip

• Nylon coated blade for maximum durability

• 27mm wide

Hi-viz tape measure

Only £9.99

Only £11.49

5m (16ft):

8m (26ft):



A new way to clean and degrease mechanical metal parts which is cheaper, more environmentally friendly and more straightforward when it comes to health and safety, compared to traditional solvent-based cleaning systems. The 100L

biological parts washer uses micro-organisms to transform pollutants into food and energy sources.

Used with Orapi’s Oranet F multi-purpose detergent and Orazym micro-organism tablets, it is more economical because: • Lower running costs due to its 38°C operating temperature

• Minimal disposal costs since the micro-organisms destroy fatty residues and dissolve grease, oil, proteins and sludge

• Detergent only needs topping up as necessary, rather than completely changed

• One micro-organism tablet needed per month (will vary according to use)

• Rubber seals, plastics and varnishes last longer as they are not being attacked by solvents

• System only involves elements which are non-flammable, which could result in lower building insurance premiums if you no longer need to keep flammable chemicals on siteIt's more environmentally friendly because:

• Minimal waste to dispose of • No volatile organic compounds (VOCs) • Does not damage the ozone layer • Reduces nasty odours associated with traditional parts washers • Increases the usable lifetime of the detergent • Non-pathogenic micro-organismsAnd it simplifies your health and safety responsibilities because:

• Oranet F detergent is pH neutral and composed of surfactants which are non-toxic and non-flammable, while

Orazym tablets are free from VOCs, non-toxic and non-flammable, so neither have any hazard

warning labelsCall us on 01753 685921 to arrange a

demonstration Hire purchase may be available.The £3,300 set-up price includes the parts washer,

100 litres of Oranet F detergent and 10 Orazym tablets – enough for

the first year based on average usage.

Video

available

Biological parts washer

£3,300

NEW!

Mitutoyo Absolute AOS Digimatic Caliper

500-196-30 • Digital caliper with standard outside and inside jaws

• Hardened stainless steel, with the latest electromagnetic

NOW ONLY £55


Absolute AOS scale for error-free, high-speed measurement

• Range 0-150mm/0-6”

Jump start your car, van, forklift or any 12V battery in just two minutes with this simple and innovative technology. • If the vehicle won't start, the ElectroStart800 needs only 5V to charge itself

• If there is less than 5V in the battery the unit can be charged from another vehicle's battery, or even

from a mobile

phone or laptop

ElectroStart800 batteryless battery starter

NOW ONLY £99.99


Video

available using the USB cable supplied

• After two minutes it is able to safely deliver a full charge to the faulty battery

• Fits into most glove boxes and needs no maintenance so is ready when you need it

• Ideal for professional mechanics, DIY users and for getting you out of a hole!

• Supplied in storage bag

NEW!


2 Measuring Our experts are waiting to take your call on 01753 685926

Value line digital caliperFeatures: • Large LCD display • Zero point at any position

• ABS/INC measurement • Thumb wheel for fine adjustment • Auto off function • Four-way measurement • Values in mm and inches FROM ONLY £18.81

Model Range (mm) (in)

Resolution (mm) (in)

Jaws (mm)

Usual price

Price today

MW110-15DBL 0-150 0-6 0.01 38.0 40 £40.30 £18.81MW110-20DBL 0-200 0-8 0.01 38.0 50 £69.50 £32.43MW110-30DBL 0-300 0-12 0.01 38.0 60 £113.50 £52.97

Usual price: from £40.30

Micrometer103-137 • Basic, cost effective, non-digital micrometer with a ratchet stop to guarantee repeatable measurement

• Range: 0-25mmNOW ONLY £35.01Usual price: £40.40

Absolute digimatic solar super caliper 500-784 • Waterproof, solar powered digital caliper suitable for use in the presence of coolant or cutting oil

• Hardened stainless steel construction and equipped with standard outside and inside jaws

• No battery needed • Absolute system scale for error free, high-speed measurement

• Range: 0-150mm/0-6"

NOW ONLY £135.20


Digimatic QuantuMike micrometer293-185 • Rapid action, waterproof digital micrometer that enables measurements to be made several times faster than a standard micrometer

• Highly stable frame incorporates a heat shield to preserve accuracy over extended measuring sessions

• Ratchet thimble guarantees repeatable measurement

• Range: 0-25mm/0-1"

NOW ONLY £144.73Usual price:

£167.00


Digital indicator peak hold ID-C543-301B • Max/min/range (run-out value) can be measured

• Fast measurement frequency mode (detection cycle 20ms or 50 times/s) is selectable to measure in peak detection mode

• Coefficient A freely definable and x = displacement of the plunger

• Analogue bar graph in the display (12 different scales switchable)

• GO/±NG tolerance judgement function • Enables use of calculation function for measured value Ax

• USB interface box can be used to set up the indicator from PC via dedicated software

NOW ONLY £241.80

Digimatic coolant proof micrometer293-340-30 • Waterproof digital micrometer suitable for use in the presence of coolant or cutting oil

• Highly stable frame incorporates a heat shield to preserve accuracy over extended measuring sessions

• Ratchet stop guarantees repeatable measurement

• Range: 0-25mm/0-1"

293-341-30 • As above except range: 25-50mm/1-2"

NOW ONLY £120.47Usual price:

£139.00


NOW ONLY

£169.00

Surftest SJ-210 portable surface roughness tester178-561-02E • Operates independently of mains power and measures almost any part of practically any size

• 2.4in colour graphic back-lit LCD screen provides easy to read display

• Operates by keys on front of the unit and under sliding cover

• Up to 10 measurement conditions and one measured profile can be stored in internal memory

• Memory card can be used to increase memory and store large quantities of measured surface profiles and set-up conditions

• Access to each feature can be protected to prevent unintended operation

• Alarm warns when stylus should be checked for wear • Complies with international standards on definition and calculation of values of surface roughness parameters

• As well as calculation results, sectional calculation results and assessed profiles, bearing curves and amplitude distribution curves can be displayed

NOW ONLY £1,180.00

Usual price: £1,280.00

SAVE£100

Absolute digimatic indicator543-491B • Digital indicator of a similar size to a Series 2 type dial indicator

• Absolute system scale for error free, high-speed measurement

• Functionality includes displaying the result of an internal calculation based on spindle displacement, according to a single-term user-defined formula (Ax), and tolerance judgement

• SPC data output • Range: 50mm/2"

NOW ONLY £272.00


SAVE 31%


3Measuring Paint/Coatings


FROM ONLY £20.34

Floorcoat PU 7200 floor paint • Hard-wearing, easy to apply single pack floor coating with PU addition

• Available in gloss or satin • Standard colours: light grey, steel grey, English red, traffic yellow, white

• Tintable in virtually any colour • High coverage: 9m²/L • Use on many surfaces including wood, concrete and masonry

• Ideal for line marking • Internal and exterior use • Aggregate can be added for non-slip finish

Rust-Oleum 7200 Size Usual price Price todayStandard colours 2.5L £22.60 £20.34Standard colours 5L £35.06 £31.55Custom mixed colours 2.5L £24.39 £21.95Custom mixed colours 5L £37.22 £33.50

NEW!

Absolute digimatic height gauge570-312 • Solid base and large, smooth slider feed wheel

• Rigid column structure ensures high measuring accuracy

• Absolute linear encoder eliminates overspeed errors

• Range: 0-300mm / 0-12"570-314 • As above except range: 0-600mm / 0-24"

NOW ONLY £363.13

NOW ONLY £610.13

Usual price: £419.00 Usual price: £704.00

Level indicator 513-404E • Versatile anti-magnetic type lever indicator (or dial test indicator) suited to alignment operations on machine tools and similar applications

• Automatically adapts to the required measuring direction on contact, and the jewelled movement provides lowest friction and stiction for smooth and precise operation

• Supplied with basic set of mounting accessories

• Range: 0.8mm

513-404T full set • As above except it comes with a comprehensive set of mounting accessories and interchangeable styli that enable immediate use in almost any situation

NOW ONLY £62.66


NOW ONLY £75.83


• 3-in-1 (primer, undercoat and topcoat) gloss finish for metal

• Longer lasting metal protection • May be applied directly to stable (not loose) rusted steel

• High coverage: 25-26m² per 2.5L • Good drying properties at low temperatures

CombiColor 7300 gloss metal paint

Rust-Oleum 7300 Size Usual price Price todayStandard colours 750ml £12.58 £11.32Standard colours 1L £15.21 £13.69Standard colours 2.5L £31.71 £28.54Custom mixed colours 1L £17.97 £16.17Custom mixed colours 2.5L £40.61 £36.55

FROM ONLY £11.32


Avenue quick drying zinc phosphate metal primer • Excellent anti-corrosive primer which is lead and chromate free

• Suitable for use on manually or blast cleaned iron and steel

• High build • 5 litres RED ONLY

£18.42GREY ONLY £18.89

Usual price:

£20.47


HIGHWAY

One-component anti-corrosion zinc coating system. • Unique formula provides environmentally safe cathodic protection to steel comparable with hot-dip galvanising, with the added advantage that it can be applied as though it were a paint

• Active zinc performance coating which works in conjunction with the metal, whereas paints are passive barriers and once they are breached corrosion sets in immediately

• Unlimited pot life so it does not skin over or go tacky in the tin

• Comes in 1kg and 2kg tins, or 500ml aerosol

Zinga zinc coating system


SizeUsual price

Price today

1kg tin £17.33 £15.602kg tin £34.67 £31.20500ml aerosol £16.46 £14.81

FROM ONLY £14.81

One coat (primer and finish in one) maintenance paint, direct to many surfaces • Apply direct to many different substrates, including wood, metal, MDF, masonry, tiles, most rigid plastics including PVC, old concrete, aged galvanized steel and more

• Gloss, satin or matt (limited colours) • High coverage: 9m² per litre • Interior and exterior

FROM ONLY £7.80

CombiColor Multi Surface paint

Usual price: £8.67 Finish Size Usual price Price todayGloss 750ml £8.67 £7.80Gloss 2.5L £22.10 £19.89Satin 750ml £8.67 £7.80Satin 2.5L £22.10 £19.89Matt 750ml £8.67 £7.80Matt 2.5L £22.10 £19.89

• Fast-drying paint for small maintenance or touch-up jobs (dries in 10-15 mins)

• Higher coverage: 3-4m². One Hard Hat aerosol equals 2-3 standard aerosols

• Higher film build in one go without drips or runs – twice the opacity of cheaper sprays (saving a cross layer)

• 40-plus colours. Bulk discounts

Hard Hat aerosol topcoat


NOW ONLY

£10.13

These deals are so good you could do with some of these gloves just to hang

on to them! Turn to page 5

When it comes to low prices we've drawn a line in the sanding! See page 7


4

Free mounting bracket

Personal Protection Equipment Our experts are waiting to take your call on 01753 685926

Hearing protection • Moldex 7625/7650 MelLows disposable ear plugs. SNR 22dB. Pack of 250/500 pairs. Wall mountable dispenser can be purchased separately. Ideal for users who need to keep in touch with the environment. Soft, comfortable material is stiff when rolled, for easy insertion.

• Moldex M4 Earmuffs. SNR 30dB. High quality, robust, very low profile. Light and flexible (260g), with low contact pressure. Ribbed air cushions for cool comfort.

• Moldex M6 Earmuffs SNR 35dB. High quality, robust, very low profile. Light and flexible (355g), with low contact pressure. Ribbed air cushions for cool comfort.

• Moldex M5 Earmuffs. SNR 34dB. High quality, robust, very low profile. Light and flexible (310g), with low contact pressure. Ribbed air cushions for cool comfort.

NOW ONLY £21.31

NOW ONLY £39.77

NOW ONLY £10.29NOW ONLY £11.39

NOW ONLY £13.49

for 250 pairs for 500 pairs

Too hot to wear long trousers? Just zip it! All the benefits of sturdy work trousers plus an option to stay cool by removing the lower legs.

All 32" leg, waist sizes 32"-38". Black. • Zip-off trouser leg • D-ring front belt loop • Two front pockets • Two rear pockets with Velcro fastening

• Two side cargo pockets with press studs

• Top-loading knee pockets with secure

• Velcro flap • Rip-stop cotton • Tunnel belt loop • YKK fly zip

Apache Zipper work trousers/shorts

NOW ONLY £19.95


Half masks – ultra light 7000 series • Mask body made of soft TPE material which is gentle on the skin

• Extremely lightweight • Easy maintenance and cleaning without tools

• Easy handling thanks to EasyLock filter system

• No additional adapters or parts necessary

• Can be worn around the neck during breaks

• Small, medium or large sizes

• 9030 particulate filter P3 R. Six pairs.


• 9400 ABEK1 gas filter cartridge (A1, B1, E1, K1). Five pairs.


• 9430 Easylock filter ABEK1 P3 gas and particulate preassembled filters. Three pairs.


NOW ONLY £10.63NOW ONLY £29.74NOW ONLY £40.86NOW ONLY £38.67


4540+ coverallHighly versatile protective coverall which is mostly made from a unique microporous PE laminate, designed to be softer and drape better over the body • Designed to offer an excellent barrier to particles and limited liquid splash but also features a breathable SMMMS back panel. Type 5/6

• Elasticated hood, ankles and waist • Two-way zip with fully sealable storm flap

• Three-panel hood • Knitted cuffs

• Low linting • Small, medium, large, extra large sizes

NOW ONLY £3.77Usual price: £4.19

Usual price: £23.68 Usual price: £44.19

• Moldex 7825/7850 Spark Plugs station. Includes 250/500 pairs. SNR 35dB. Contoured shape gives extra safe fit at high protection level. Soft, comfortable material is stiff when rolled, for easy insertion. Mounting bracket sold separately.

NOW ONLY £24.59

NOW ONLY £36.61

for 250-pair dispenser for 500-pair dispenser

Usual price: £40.68Usual price: £27.32

• Moldex WaveBand 2K 6800. SNR 27dB. Pack of eight pairs. Ideal for users who frequently remove and replace

hearing protection. Worn under the chin, the band stays away from the body, allowing free movement. Lightweight (12g). Replacement foam pods available (one pair in pack).

NOW ONLY £29.19for 8 pairs





• 3M Peltor Optime III Headband Earmuffs. SNR 30dB. For moderate to high noise protection. Extremely low profile – easy to team with other equipment. Good inside depth improves comfort. Soft, wide sealing rings filled with foam and liquid, giving optimum sealing and low pressure. Lightweight (372g).

• 3M E-A-R Classic earplug disposable pillow pack

• Excellent hearing protection and all day comfort

• Moisture resistant so can be cleaned up tothree times, making them economical

• Also available in small and corded versions

• SNR 28dB (uncorded), 29dB (corded)

• 3M Peltor X Series X1A headband earmuffs. SNR 27dB. High performance earmuffs for light industry. Wire headband is electrically insulated for reliable protection. Soft, wide cushions reduce pressure around ears and improve comfort. Large space inside cups cuts moisture heat Lightweight (184g).

Hearing protection

NOW ONLY £12.58

NOW ONLY £15.40

NOW ONLY £65.81

for 250 pairs





5 Personal Protection Equipment

• Uniglove ProTect Latex: Heavyweight extended cuff latex gloves. Powder-free, durable, single use gloves. Up to four times thicker than standard latex gloves. £4 for 50 gloves

• Polyco Matrix High Viz: Seamless hi-vis liner, latex coated glove with excellent grip. £18 for 12 pairs £189 for 144 pairs

• Polyco Matrix Red PU: Seamless nylon liner with polyurethane palm coating. £8.28 for 12 pairs £90 for 144 pairs

• Polyco Matrix F Grip: Seamless knitted liner with foam nitrile coating. Excellent wet grip. Elasticated knitted wristband. Protects against abrasions, scratches and dirt. £9.09 for 12 pairs £95.40 for 144 pairs

• Polyco Matrix S Grip Orange: Seamless polycotton shell with crinkle latex palm coating. £9 for 12 pairs £100 for 144 pairs

• Polyco Matrix Mechanics: Mechanic-style glove made with blend of synthetic leathers. Three open fingers for maximum dexterity. £4.47/pair £44.65 for 10 pairs

• Polyco Blue Grip: Ideal for handling rough objects. Crinkle latex coating for excellent grip in wet and dry conditions. £28.80 for 12 pairs £100 for 48 pairs

• Avenue Cotton Chrome: Chrome split leather palm and fingers with breathable cotton back. £0.68/pair

• Avenue Quality Rigger Gloves: High quality general purpose rigger with hard-wearing leather palms and reinforced fingers and knuckles. £1.20/pair

• Avenue Red PVC: PVC gloves with knitted wristbands. £1/pair

FROM ONLY £0.68

A real glove affair


Polyco Blue Grip It Max: Extraordinary wet and dry grip. Exceptional abrasion resistance and very comfortable. Often used on Tough Mudder assault courses. £26.88 for 12 pairs £99.99 for 48 pairs

• Polyco Matrix Touch 1: Use touch screen devices without removing glove. Good abrasion and tear resistance. Perfect for tasks requiring care and precision. £0.99/pair £92.50 for 100 pairs

• Polyco Grip It Oil: Soft, resilient and completely waterproof. Maximises grip in wet and oily conditions. Excellent abrasion protection, highly durable and comfortable. £26.60 for 10 pairs £150 for 60 pairs

• Polyco Matrix Nitrile Grip: Seamless knitted liner with full nitrile coating. £9.86 for 10 pairs £103.50 for 120 pairs

• Polyco Matrix D Grip: Seamless for extra comfort with PVC dots for excellent grip and handling. £7.38 for 12 pairs £77.40 for 144 pairs

• Polyco Reflex Therm: Natural rubber palm coated glove with fleecy liner for use in colder temperatures. £29.99 for 10 pairs £300 for 120 pairs

• 3M SecureFit 400 clear. Pressure Diffusion Temple Technology allows temples to adjust to individual head size and help spread pressure over the ear.

• DeWalt Reinforcer safety glasses. Double as reading glasses and provide maximum

comfort for all day wear. Feature soft rubber nose piece and cushioned rubber temple pads. 99.9% UV protection.

• DeWalt Infinity safety glasses. Wraparound frame to protect against debris. Rubber-tipped temples and soft rubber nose piece keep glasses in place. Polycarbonate lenses for added impact resistance and UV protection.

• Scan visitor safety spectacles. Wraparound eyeshield protects against

low energy, high speed impacts. Panoramic vision. Comfortable wide frame and integral brow shield. Can be worn over most prescription glasses.

• 3M 2890 clear safety goggles. Anti-scratch, anti-fog, slimline, lightweight. Vented for improved circulation, comfort and reduced fogging. Optical class 1 for top clarity. Strong polycarbonate lenses.

• Bollé Cobra safety spectacles. Wraparound fit offers 180° vision with perfect optical quality. Non-slip nose bridge with clear anti-scratch and anti-fog platinum coating.

• 3M headgear combination G500, with face shield 5F-1 and Peltor Optime I Earmuff. Hearing and face protection. Use with or without earmuffs. Accessories include face shield, integrated eyewear and sweatband.

EyewearUsual price: £4.43

NOW ONLY £3.99

Usual price: £7.28

NOW ONLY £6.55

Usual price: £8.09

NOW ONLY £7.28

Usual price: £3.21

NOW ONLY £2.89

Usual price: £7.66

NOW ONLY £6.89

Usual price: £8.32

NOW ONLY £7.49


NOW ONLY £31.16


6 Tape/Office Supplies Our experts are waiting to take your call on 01753 685926

Double-ended permanent marker

UK

12 for only£5.42

• Handy twin marker pen with 4mm chisel nib at one end and 1mm bullet nib at the other

• Suitable for flip charts, OHPs and CD marking – will write on most surfaces

• Available in black, blue and red

Usual price: £9.77

Self-adhesive document envelopesDocuments enclosed envelopes. • Polythene pouches with self-adhesive backing for securing delivery notes and documents to packages

• Choose either a plain finish or 'documents enclosed' printed on them – no difference in price

Internal size (mm)Pack size Order code Usual price Price today

A7 (118x98mm) plain 1000 P1STA7PL £21.63 £10.81A7 (118x98mm) docs enclosed 1000 P1STA7DE £21.63 £10.81A6 (160x110mm) plain 1000 P1STA6PL £31.43 £15.71A6 (160x110mm) docs enclosed 1000 P1STA6DE £31.43 £15.71A5 (225x165mm) plain 1000 P1STA5PL £69.46 £34.73A5 (225x165mm) docs enclosed 1000 P1STA5DE £69.46 £34.73


FROM ONLY £10.81

Low noise buff packaging tape for securing boxes

Standard (Vibac 831) • 48mm x 66m: £5.99 per pack of 6 (AOS0000)

Premium • 48mm x 66m: £1.44 per roll • 48mm x 66m: £8.08 per pack of 6

Packaging tape dispenser • £2.49 each (AT)

Other tape and accessories

3M 3434 blue low tack masking tape 50m – will not lift and leaves no residue on paint, glass, plastic or rubber. Perfect choice for

masking up trims prior to polishing by hand or machine.

3M 8915 clean removal filament tape – high tensile tape designed to hold appliance parts in place during manufacturing and shipping. Ideal for strapping, bundling and reinforcing. • 48mm x 55m: £4.25 per roll • 48mm x 55m: £92.00 per box of 24

3M 101E (2120) general purpose masking tape 50m • 24mm: £1.10 per roll; £34.99 per box of 36 • 48mm: £2.25 per roll; £39.99 per box of 20

3M 201E (2321) 80⁰ masking tape 50m – sticks to many surfaces, no residue. Great for wrapping electrical cords, air hoses, PVC pipes. • 18mm: £1.03 per roll • 24mm: £1.39 per roll • 36mm: £2.10 per roll • 48mm: £2.79 per roll • 72mm: £4.18 per roll

3M 301E (2364) 100⁰ performance masking tape 50m – for industrial painters. Withstands surface temperatures up to 100˚C for one hour. • 24mm: £2.52 per roll • 36mm: £3.81 per roll • 48mm: £5.02 per roll • 72mm: £7.54 per roll

3M 401E (2610) 140⁰ high temperature masking tape 50m – superior finishes when surface temperatures reach up to 140°C. • 18mm: £1.97 per roll • 24mm: £2.62 per roll • 36mm: £3.93 per roll • 48mm: £5.24 per roll • 72mm: £7.88 per roll

3M 501E (2610) 160⁰ high temperature masking tape 50m – will withstand repeated bake cycles. Moisture and solvent resistant. • 18mm: £2.03 per roll • 24mm: £2.68 per roll • 36mm: £4.07 per roll • 48mm: £5.36 per roll • 72mm: £8.04 per roll

Roll up, roll up

FROM ONLY £1.03Usual price: from £1.14

• 24mm: £1.75 per roll; £57.16 per box of 36 • 36mm: £2.60 per roll; £57.16 per box of 24 • 48mm: £3.15 per roll; £57.16 per box of 20

3M 1900 duct tape black/silver 50m – general purpose cloth tape which sticks well to a wide variety of surfaces. Good choice for non-critical applications. Easy to tear. • 50mm (2in) black: £2.21 per roll • 75mm (3in) black: £3.33 per roll • 50mm (2in) silver: £2.21 per roll

Pallet wrap for securing boxes

Pallet wrap/blown stretch film

• Clear: 500mm x 250m (equiv 20 micron)£39.99 for 6 rolls (AOS)

• Black: 500mm x 250m (equiv 25 micron)£42.99 for 6 rolls (AOS)

FROM ONLY £39.99 for six

Padded/bubble lined envelopes • Environmentally friendly padded gusset envelopes are 100% recycled and recyclable and are for protecting contents in transit

• Bubble lined envelopes are designed to be impact resistant to protect delicate or fragile items in transit

FROM ONLY £6.99


Padded gusset envelope – white

SizePack size Usual price Price today

C5 229 x 162 x 50mm 100 £33.32 £29.99C4 324 x 229 x 50mm 100 £42.21 £37.99B4 353 x 250 x 50mm 100 £44.43 £39.99E4 400 x 280 x 50mm 100 £53.88 £48.49

Bubble lined envelope – whiteSize 1 100 x 165mm 100 £7.77 £6.99Size 3 150 x 215mm 100 £9.88 £8.89Size 4 180 x 265mm 100 £12.21 £10.99Size 5 220 x 265mm 100 £15.43 £13.89Size 7 230 x 340mm 50 £9.43 £8.49Size 8 270 x 360mm 50 £13.66 £12.29Size 9 300 x 445mm 50 £16.10 £14.49Size 10 350 x 470mm 50 £17.21 £15.49

• Strong, resilient, versatile and cost effective polystyrene packaging which fills the voids between and around products

• Unaffected by moisture, unlike a lot of loose fill on the market

• Contains recycled materials and when it does finally reach the end of its life, often having been reused, it is recyclable again

• 15ft³/0.425m³

Loose fill packaging


NOW ONLY £14.75


7 Abrasives

Roloc 361F/363F cloth discs • Durable, high performance disc for grinding, blending, deburring and finishing on all metals

• Tough polyester backing

supports medium-pressure applications and provides consistent performance

• Can be used wet or dry • Box of 50 discs

GradeDiameter

(mm) Usual price Price todayP36 25 £15.44 £13.33P60 25 £15.44 £13.33P80 25 £15.44 £13.33P120 25 £15.44 £13.33P24 50 £26.66 £23.99P36 50 £26.66 £23.99P50 50 £26.66 £23.99P60 50 £26.66 £23.99P80 50 £26.66 £23.99P100 50 £26.66 £23.99P120 50 £26.66 £23.99P180 50 £26.66 £23.99P240 50 £26.66 £23.99P24 75 £32.32 £29.99P36 75 £32.32 £29.99P50 75 £32.32 £29.99P60 75 £32.32 £29.99P80 75 £32.32 £29.99P120 75 £32.32 £29.99P180 75 £32.32 £29.99P240 75 £32.32 £29.99

FROM ONLY £13.33


Siafleece hand pads

• Box of 10 • For blending, regraining and cleaning flat and contoured surfaces

• Can be used on a variety of substrates including wood and metal

• Can be used wet or dry • Aluminium oxide or silicon carbide grit

• Nylon fibre and resin backing

• Size: 152x229mm

Grade Usual price Price todayExtra Cut £8.19 £7.37General Purpose XS £3.86 £3.47General Purpose HD £4.77 £4.29Medium S £4.96 £4.46Medium A £4.96 £4.46Fine A £4.77 £4.29Very Fine A £4.77 £4.29Very Fine A XS £4.77 £4.29Ultra Fine S £4.77 £4.29Ultra Fine S XS £4.77 £4.29Cleaning/Polishing £4.77 £4.29

FROM ONLY £3.47Usual price:

from £3.86

982C • Slices through carbon steel at up to twice the cut rate and lasts up to twice as long as other fibre discs, which also means time saved on changing the disc

• This disc requires less grinding pressure, which means less operator fatigue, faster throughput and more parts per disc when tackling high pressure grinding applications such as medium to heavy duty stock removal

• Don't settle for a disc that can't keep up. The 982C cuts faster, lasts longer and requires less pressure – it works harder so you don't have to.

Cubitron II fibre discs

Disc x hole diameter (mm) Grade Max RPM Usual price Price today

100x16 P36 15200 £125.92 £113.33100x16 P60 15200 £108.14 £97.33100x16 P80 15200 £103.70 £93.33115x22 P36 13200 £140.74 £126.67115x22 P60 13200 £121.48 £109.33115x22 P80 13200 £112.59 £101.33127x22 P36 12000 £152.59 £137.33127x22 P60 12000 £134.81 £121.33127x22 P80 12000 £125.92 £113.33180x22 P60 8500 £265.19 £238.67180x22 P80 8500 £256.30 £230.67

Usual price: from £103.70 FROM ONLY £93.33

SC-DR • For use on all metals: removing rust and cleaning flat metal parts; removing discolouration and residual sealants; surface preparation after weld seam removal, prior to coating or painting; and reducing roughness after sanding

• Highly durable product for aggressive applications

• Great for edge deburring

• Super duty grade can be used to remove small welds

• Box of 50 (no hole) • Max RPM 23000

Roloc surface conditioning discs

Grade Colour Diameter (mm) Usual price Price todayFine Blue 50 £43.55 £39.20Medium Maroon 50 £43.55 £39.20Coarse Light brown 50 £43.55 £39.20Heavy duty Dark brown 50 £43.55 £39.20Super duty Black 50 £43.55 £39.20Fine Blue 75 £77.33 £69.60Medium Maroon 75 £77.33 £69.60Coarse Light brown 75 £77.33 £69.60Heavy duty Dark brown 75 £77.33 £69.60Super duty Black 75 £77.33 £69.60

FROM ONLY £39.20


785C • Durable fibre disc features a high-performance ceramic/aluminium oxide blend abrasive which is ideal for blending, grinding and weld removal

• Self-sharpens, leading to high cut rates and increased durability – outcuts and outlasts aluminium oxide

• Stiff fibre backing provides the durability needed for weld removal and other medium pressure applications such as deburring or rust removal

• Grinding aid reduces temperatures for processes involving heat sensitive alloys such as stainless steel, nickel alloys and titanium

• Maximum RPM 13200

GradeDiameter

(mm) Usual price Price todayP24 115 £22.21 £19.99P36 115 £21.10 £18.99P50 115 £19.25 £17.33P60 115 £18.52 £16.67P80 115 £17.41 £15.67P100 115 £17.41 £15.67P120 115 £17.41 £15.67

Fibre discs


FROM ONLY £15.67

Sianet 7900New from Sia, the Sianet 7900 is a highly flexible series which offers optimum dust free extraction, very high stock removal rates, high tear resistance and full surface dust extraction without being dependent on a hole system. • For use on wood, primer, acrylic lacquer, MDF, solid surface and plaster

• Grits available: P80, P120, P180, P240, P320

• 50 discs (150mm diameter): usual price £41.43, price today £24.85 125mm diameter also available

• 50 strips (70x198mm): usual price £32.06, price today £19.24 70x125mm, 81x133mm, 70x420mm also available

NEW

FROM ONLY £19.24



8 Holemaking Our experts are waiting to take your call on 01753 685926

A125 • HSS extra length drill for general machining

• Ideal for long reach and deep hole applications

• Steam tempered finish improves wear resistance

• Capable of drilling holes up to 10x diameter in most materials

• Recommended for use with steel and cast iron

• 1.4mm-14mm (1/16-½in) diameters

FROM ONLY £5.32

Diameter (mm)

Flute length (mm)

OAL (mm) Order code

Usual price

Price today

1.5 80 125 A1251.5X125 £14.74 £6.881.5 100 160 A1251.5X160 £17.43 £8.132.0 80 125 A1252.0X125 £11.40 £5.322.0 100 160 A1252.0X160 £13.37 £6.243.0 100 160 A1253.0X160 £12.57 £5.873.0 150 200 A1253.0X200 £16.80 £7.843.0 200 250 A1253.0X250 £21.34 £9.964.0 100 160 A1254.0X160 £12.80 £5.974.0 150 200 A1254.0X200 £16.49 £7.694.0 200 250 A1254.0X250 £22.11 £10.325.0 100 160 A1255.0X160 £14.46 £6.755.0 150 200 A1255.0X200 £19.06 £8.895.0 200 250 A1255.0X250 £23.66 £11.046.0 150 200 A1256.0X200 £20.46 £9.556.0 200 250 A1256.0X250 £27.37 £12.776.0 250 315 A1256.0X315 £34.11 £15.928.0 200 250 A1258.0X250 £35.74 £16.688.0 250 315 A1258.0X315 £48.09 £22.44

10.0 200 250 A12510.0X250 £48.71 £22.7310.0 250 315 A12510.0X315 £60.66 £28.3112.0 200 250 A12512.0X250 £64.29 £30.0012.0 250 315 A12512.0X315 £74.94 £34.97

(in) (mm) (mm)3/32 100 160 A1253/32X160 £13.43 £6.27⅛ 100 160 A1251/8X160 £15.49 £7.23⅛ 200 250 A1251/8X250 £30.54 £14.25

5/32 100 160 A1255/32X160 £15.66 £7.315/32 150 200 A1255/32X200 £18.54 £8.653/16 100 160 A1253/16X160 £15.09 £7.043/16 150 200 A1253/16X200 £17.23 £8.04¼ 150 200 A1251/4X200 £21.89 £10.21¼ 200 250 A1251/4X250 £28.40 £13.25¼ 250 315 A1251/4X315 £35.20 £16.43

Extra length drills


557 • 90° point • Fast, accurate spotting

Nominal diameter

Flute length (mm) OAL (mm) Order code

Usual price

Price today

3.0 10 46 557003.0 £18.76 £8.754.0 12 52 557004.0 £19.16 £8.945.0 14 60 557005.0 £20.22 £9.446.0 16 66 557006.0 £20.71 £9.668.0 21 79 557008.0 £34.78 £16.23

10.0 25 89 557010.0 £38.37 £17.9112.0 30 102 557012.0 £56.86 £26.5316.0 37 115 557016.0 £73.86 £34.47

HSS NC spotting drills


FROM ONLY £8.75

A777 • HSCo heavy duty jobber drill • Perfect for drilling higher tensile, tougher materials such as stainless and heat resistant steels

• Ideal for use in DEC and automated machines where greater heat is generated during drilling

• 135° split point helps penetration, precise positioning and improves hole size, finish and quality

• 0.30mm-16mm (1/16-½in) diameters

Jobber length drills

Dia

Flute length (mm)

OAL (mm) Order code

Usual price

Price today

1.0 12 34 A7771.0 £5.66 £2.641.5 18 40 A7771.5 £5.00 £2.332.0 24 49 A7772.0 £4.06 £1.892.5 30 57 A7772.5 £4.57 £2.133.0 33 61 A7773.0 £4.57 £2.133.2 36 65 A7773.2 £5.29 £2.473.3 36 65 A7773.3 £4.77 £2.233.5 39 70 A7773.5 £5.60 £2.614.0 43 75 A7774.0 £5.94 £2.774.1 43 75 A7774.1 £6.54 £3.054.2 43 75 A7774.2 £6.20 £2.894.5 47 80 A7774.5 £7.49 £3.494.9 52 86 A7774.9 £7.49 £3.495.0 52 86 A7775.0 £7.37 £3.445.5 57 93 A7775.5 £9.77 £4.566.0 57 93 A7776.0 £9.54 £4.456.5 63 101 A7776.5 £11.91 £5.566.8 69 109 A7776.8 £12.91 £6.037.0 69 109 A7777.0 £13.63 £6.367.5 69 109 A7777.5 £14.49 £6.768.0 75 117 A7778.0 £16.03 £7.488.5 75 117 A7778.5 £18.23 £8.519.0 81 125 A7779.0 £21.14 £9.879.5 81 125 A7779.5 £22.97 £10.72

10.0 87 133 A77710.0 £25.11 £11.7210.2 87 133 A77710.2 £32.00 £14.9310.5 87 133 A77710.5 £32.40 £15.1211.0 94 142 A77711.0 £37.29 £17.4012.0 101 151 A77712.0 £43.29 £20.2013.0 101 151 A77713.0 £51.46 £24.01

(in) (mm) (mm)7/64 33 61 A7777/64 £5.06 £2.36⅛ 36 65 A7771/8 £4.57 £2.13

9/64 39 70 A7779/64 £5.83 £2.723/16 52 86 A7773/16 £6.54 £3.05

13/64 52 86 A77713/64 £8.49 £3.96


FROM ONLY £1.89

NC cobalt spotting drills 90° & 120° • For more precise centring work on NC/CNC machines

• Large diameter permits chamfering work after centring

Dia (mm)

Flute length (mm)

OAL (mm)

Order code 90°

Order code 120°

Usual price

Price today

3 12 46 8214020300 8224020300 £5.06 £2.364 12 55 8214020400 8224020400 £5.26 £2.455 15 60 8214020500 8224020500 £5.40 £2.526 20 66 8214020600 8224020600 £5.86 £2.738 25 79 8214020800 8224020800 £6.86 £3.20

10 25 89 82140201000 82240201000 £8.83 £4.1212 30 102 82140201200 82240201200 £12.46 £5.8116 35 115 82140201600 82240201600 £21.83 £10.1920 40 131 82140202000 82240202000 £36.26 £16.92

Usual price: from £5.06 FROM ONLY £2.36

Jobber, spotting, cobalt, carbide – you know the drill! Call us on 01753 685921 or

email [email protected]

25 piece jobber drill setA095204 • 1-13mm diameter A002 drill bits in 0.5mm increments

NOW ONLY £69.99



9

A110 • HSS long series drill for general machining applications

• Ideal for long reach and deep hole applications

• Straight shank • Steam tempered finish improves wear resistance

• Capable of drilling holes up to 6x diameter • Diameters available: 0.50-22.0mm, 1/32-1in

Dia

Flute length (mm)

Total length (mm) Order code

Usual price

Price today

1.0 33 56 A1101.0 £5.31 £2.481.5 45 70 A1101.5 £4.70 £2.192.0 56 85 A1102.0 £3.69 £1.722.5 62 95 A1102.5 £3.83 £1.793.0 66 100 A1103.0 £3.83 £1.793.2 69 106 A1103.2 £4.28 £2.003.3 69 106 A1103.3 £4.62 £2.163.5 73 112 A1103.5 £4.50 £2.104.0 78 119 A1104.0 £4.64 £2.164.2 78 119 A1104.2 £5.31 £2.484.5 82 126 A1104.5 £5.55 £2.594.8 87 132 A1104.8 £6.63 £3.095.0 87 132 A1105.0 £5.96 £2.785.5 91 139 A1105.5 £7.54 £3.526.0 91 139 A1106.0 £7.48 £3.496.5 97 148 A1106.5 £9.59 £4.476.8 102 156 A1106.8 £10.57 £4.937.0 102 156 A1107.0 £10.14 £4.738.0 109 165 A1108.0 £12.49 £5.838.5 109 165 A1108.5 £14.26 £6.66

10.0 121 184 A11010.0 £18.19 £8.4910.2 121 184 A11010.2 £25.50 £11.9011.0 128 195 A11011.0 £24.59 £11.4812.0 134 205 A11012.0 £28.95 £13.51(in) (mm) (mm)1/32 25 46 A1101/32 £5.34 £2.491/16 50 76 A1101/16 £4.53 £2.123/32 62 95 A1103/32 £4.34 £2.029/64 73 112 A1109/64 £4.45 £2.085/32 79 119 A1105/32 £4.64 £2.167/32 91 139 A1107/32 £7.63 £3.565/16 109 165 A1105/16 £12.14 £5.67

Extra length drills


FROM ONLY £1.72

A002 • HSS jobber drill, TiN coated for extended tool life and increased performance

• Suitable for a wide range of materials including carbon/alloy steels, cast iron, titanium and aluminium

• Capable of drilling holes up to 6x diameter

• Straight shank • Diameters available: 1.0-16.0mm, 3/64-5/8in

Dia

Flute length (mm)

Total length (mm) Order code

Usual price

Price today

3.0 33 61 A0023.0 £1.58 £0.693.2 36 65 A0023.2 £1.82 £0.803.3 36 65 A0023.3 £1.66 £0.733.5 39 70 A0023.5 £1.93 £0.854.0 43 75 A0024.0 £2.05 £0.904.2 43 75 A0024.2 £2.14 £0.944.5 47 80 A0024.5 £2.44 £1.075.0 52 86 A0025.0 £2.55 £1.115.5 57 93 A0025.5 £3.38 £1.486.0 57 93 A0026.0 £3.30 £1.446.5 63 101 A0026.5 £4.12 £1.806.8 69 109 A0026.8 £4.46 £1.957.0 69 109 A0027.0 £4.72 £2.078.0 75 117 A0028.0 £5.53 £2.428.5 75 117 A0028.5 £6.29 £2.759.0 81 125 A0029.0 £7.32 £3.20

10.0 87 133 A00210.0 £8.68 £3.8010.2 87 133 A00210.2 £11.08 £4.8510.5 87 133 A00210.5 £11.20 £4.9011.0 94 142 A00211.0 £12.89 £5.6412.0 101 151 A00212.0 £14.97 £6.55

Multi-application jobber drills


FROM ONLY £0.69

• For stainless steel and tough materials

• DIN 371 (M2-M10) • DIN 376 (M12-20)

Size

Thread length (mm)

OAL (mm)

Shank dia

(mm)Sq

sizeTapping drill dia Order code

Usual price

Price today

M2x0.4 8 45 2.8 2.1 1.6 TM31300200 £12.47 £5.82M2.5x0.45 9 50 2.8 2.1 2.05 TM31300250 £10.34 £4.82M3x0.5 11 56 3.5 2.7 2.5 TM31300300 £8.21 £3.83M4x0.7 13 63 4.5 3.4 3.3 TM31300400 £9.26 £4.32M5x0.8 15 70 6 4.9 4.2 TM31300500 £8.53 £3.98M6x1.0 17 80 6 4.9 5 TM31300600 £8.53 £3.98M8x1.25 20 90 8 6.2 6.8 TM31300800 £10.95 £5.11M10x1.5 22 100 10 8 8.5 TM31301000 £13.23 £6.17M12x1.75 24 110 9 7 10.2 TM31301200 £16.65 £7.77M x2.0 26 110 11 9 12 TM31301400 £23.66 £11.04M16x2.0 27 110 12 9 14 TM31301600 £25.46 £11.88M x2.5 30 125 14 11 15.5 TM31301800 £38.89 £18.15M20x2.5 32 140 16 12 17.5 TM31302000 £46.38 £21.64

ISO metric coarse spiral point taps


FROM ONLY £3.83

Size range (mm)

Incre ment

Set No

No of

drills Drill type Order codeUsual price

Price today

1.0-13.0 0.5 25M 25 HSS Goldex 810504SET1 £102.86 £48.001.0-10.0 0.5 19M 19 HSS Goldex 810504SET2 £62.86 £29.331.0-13.0 0.5 25M 25 HSS-E Goldex 810505SET1 £114.29 £53.331.0-10.0 0.5 19M 19 HSS-E Goldex 810505SET2 £71.43 £33.331.0-10.0 0.5 19M 19 HSS-Co8 820702SET2 £68.57 £32.001.0-13.0 0.5 25M 25 HSS 820801SET1 £68.57 £32.001.0-10.0 0.5 19M 19 HSS 820801SET2 £45.71 £21.331.0-5.9 0.1 M4 50 HSS 820801SET3 £48.57 £22.676.0-10.0 0.1 M5 41 HSS 820801SET4 £128.57 £60.00

Jobber drill sets


FROM ONLY £21.33HSS 3 piece step

drill bit set • Drill cuts parallel holes in 2mm increments

• Set of three from 4mm to 30mm diameters

• Comes in a metal case


NOW ONLY £47.97Order code:

AK4733

Are your taps leading you a merry dance? Turn to pages 12 & 13

Holemaking


10 Lubricants/adhesives

• Supercut 1000 soluble cutting fluid: Water soluble metalworking fluid. Mixes well with most mains water to form a milky white emulsion of low odour and good corrosion protection. For use in various applications – turning, milling, drilling, boring and shaping. £69.27 for 25 litres

• Supercut 2000 extreme pressure cutting fluid: Extreme pressure, micro-emulsion metalworking fluid for general machining on ferrous materials including high carbon steel and most stainless steel. Also inhibited for use on brass and cuprous and aluminium alloys. £81.00 for 25 litres

• Supercut 8000 semi-synthetic cutting fluid: Sophisticated micro emulsion for heavy duty machining in moderate to hard diluent waters. Multi-metal compatibility, high tolerance to tramp oil and excellent surface finish on many different alloys. Use with difficult to machine alloys. £96.56 for 25 litres

• Astra 32 slideway oil: For lubricating machine tool slideways and tables. Made from high quality mineral oil, performance additives and incorporates a tackifier to ensure adhesion to moving parts. Prevents pickup and scoring on bearing surfaces. £55.36 for 25 litres

• Astra 68 slideway oil: For lubricating machine tool slideways and tables. Made from high quality mineral oil, performance additives and incorporates a tackifier to ensure adhesion to moving parts. Prevents pickup and scoring on bearing surfaces. £55.36 for 25 litres

• Triad 32 hydraulic oil: For all general industrial applications. Premium hydraulic oil – ISO VG 32 with excellent anti-wear properties and corrosion inhibition. £47.42 for 25 litres

• Triad 46 hydraulic oil: For all general industrial applications. Premium hydraulic oil – ISO VG 46 with excellent anti-wear properties and corrosion inhibition. £47.42 for 25 litres

• Superclean DD1 systems cleaner: For routine cleaning at the end of a coolant’s life. Before pumping out add Superclean DD1 at 1% by volume of the total system. £27.60 for 5 litres

Oil be there for you!We can supply the full range of Morris Lubricants including cutting fluid, hydraulic oil, slideway lubricant, extreme pressure cutting fluid, systems cleaner and antifreeze.

FROM ONLY £27.60


• 222: Low strength threadlocker that allows adjustment of screws. Good on low strength metals such as aluminium and brass which could break during disassembly. £26.41 for 50ml

• 243: Medium strength threadlocker for all metals. Tolerates contamination by engine oil, corrosion prevention oils and cutting fluids. Prevents loosening of vibrating parts. £27.49 for 50ml

• 270: High strength threadlocker for metal fasteners, stainless steel, aluminium, plated surfaces and chrome-free coatings. For permanent locking. Tolerates contamination by engine oil, corrosion prevention oils and cutting fluids. £26.62 for 50ml

Stick with Avenue!

FROM ONLY £26.41


• RTD Compound: High performance metal cutting lubricant. Clings to the tool and work piece, thus reducing friction and doubling tool life. Promotes superior work piece surface finish. Reduces wear and tap breakages. Minimises waste and scrap. Gives ultimate cutting performance on all ferrous and non-ferrous metals even in the most severe metal removal operations. £12.51 for 500g

• RTD Liquid: High performance metal cutting lubricant. Clings to the tool and work piece, thus reducing friction and doubling tool life. Promotes superior work piece surface finish. Reduces wear and tap breakages. Minimises waste and scrap. Gives ultimate cutting performance on all ferrous and non-ferrous metals even in the most severe metal removal operations. Suitable for automatic applications on CNC machines. £18.70 for 400g


FROM ONLY

£12.51

Reaming, Tapping and Drilling (RTD) Compound

Without coolant

Drill dia (mm)

Flute length (mm)

OAL (mm)

Shank dia

(mm)Order code

120° Usual price Price today3.0 20 62 6 123-XD300 £33.57 £15.673.5 20 62 6 123-XD350 £33.57 £15.674.0 24 66 6 123-XD400 £33.57 £15.674.5 24 66 6 123-XD450 £33.57 £15.675.0 28 66 6 123-XD500 £33.57 £15.675.5 28 66 6 123-XD550 £33.57 £15.676.0 28 66 6 123-XD600 £33.57 £15.676.5 34 79 8 123-XD650 £40.69 £18.997.0 34 79 8 123-XD700 £40.69 £18.998.0 41 79 8 123-XD800 £40.69 £18.999.0 47 89 10 123-XD900 £49.71 £23.20

10.0 47 89 10 123-XD100 £49.71 £23.2011.0 55 102 12 123-XD110 £78.86 £36.8012.0 55 102 12 123-XD120 £78.86 £36.8014.0 60 107 14 123-XD140 £98.29 £45.8716.0 65 115 16 123-XD160 £128.57 £60.0018.0 73 123 18 123-XD180 £162.86 £76.0020.0 79 131 20 123-XD200 £202.86 £94.67

With coolant3.5 20 62 6 133-XD350 £41.54 £19.394.0 24 66 6 133-XD400 £41.54 £19.394.5 24 66 6 133-XD450 £41.54 £19.395.0 28 66 6 133-XD500 £41.54 £19.395.5 28 66 6 133-XD550 £41.54 £19.396.0 28 66 6 133-XD600 £57.57 £26.876.5 34 79 8 133-XD650 £57.57 £26.877.0 34 79 8 133-XD700 £57.57 £26.878.0 41 79 8 133-XD800 £57.57 £26.879.0 47 89 10 133-XD900 £85.14 £39.73

10.0 47 89 10 133-XD100 £85.14 £39.7311.0 55 102 12 133-XD110 £111.43 £52.0012.0 55 102 12 133-XD120 £111.43 £52.0014.0 60 107 14 133-XD140 £171.43 £80.0016.0 65 115 16 133-XD160 £247.43 £115.4718.0 73 123 18 133-XD180 £298.86 £139.4720.0 79 131 20 133-XD200 £348.00 £162.40

Performance solid carbide drills, TiALN, 140° point, 30° helixWithout coolant • Available in 0.1mm drill diameter increments from 3mm to 12mm

• Available in 0.5mm drill diameter increments from 12mm to 20mm

With coolant • Available in 0.1mm drill diameter increments from 3.5mm to 12mm

• Available in 0.5mm drill diameter increments from 12mm to 20mm


FROM ONLY £15.67

Holemaking


11 Turning

LFMX 3.1...T8330 • For radial parting and grooving applications

• Available with single edge inserts for production of deeper grooves

• Back stop incorporated within insert for improved depth control

20xLFMX 3.10-0.20SN-M2:T8330 inserts plus 1xXLCFN 2602 J3.0 blade

Parting and grooving kit


NOW ONLY £117.99

Buy 20 inserts

and get a holder

free

CNMG 1204...T9325 • For all general external turning operations

• Holders available in left hand or right hand

• Holder design incorporates top clamp for increased security

• Offer includes 120404E, 120408E and 120412E

• Inserts with chipbreakers FF, FM, M, NM, RM, R and KR

20xCNMG 1204 inserts... T9325 inserts plus 1xDCLN 2020 K12 holder (left or right hand)OR 20xCNMG 1204 inserts...T9325 inserts plus 1xDCLN 2525 M12 holder (left or right hand)

Turning kits


NOW ONLY £99.99

Buy 20 inserts

and get a holder

free

• For drilling larger diameter holes in most materials

• Capable of machining uneven surfaces and opening out existing holes

• Tough central insert and hard peripheral insert for optimal tool life

803D drill boy diameters 15.5-58mmInsertsXPET... D8345SCET... D8330

803D indexable drilling kit

Prices dependent on insert size

FROM ONLY £412.65

Buy 10 of each

insert and get 50% off

body

CCMT 09T3...T9325 • For internal boring operations • Bars available in left hand or right hand

• Comes with through coolant for better chip evacuation

20xCCMT 09T3 inserts... T9325 inserts plus 1xA16M-SCLC (left or right hand)

Boring kit


NOW ONLY £84.99

Buy 20 inserts

and get the holder

free

IC (in) Pitch (mm) Order codeUsual price

Price today Order code

Usual price

Price today

3/8 0.75 16NR0.75ISO £12.38 £9.91 16ER0.75ISO £12.38 £9.913/8 0.8 16NR0.8ISO £12.38 £9.91 16ER0.8ISO £12.38 £9.913/8 1.0 16NR1.0ISO £12.38 £9.91 16ER1.0ISO £12.38 £9.913/8 1.25 16NR1.25ISO £12.38 £9.91 16ER1.25ISO £12.38 £9.913/8 1.5 16NR1.5ISO £12.38 £9.91 16ER1.5ISO £12.38 £9.913/8 1.75 16NR1.75ISO £12.38 £9.91 16ER1.75ISO £12.38 £9.913/8 2.0 16NR2.0ISO £12.38 £9.91 16ER2.0ISO £12.38 £9.913/8 2.5 16NR2.5ISO £12.38 £9.91 16ER2.5ISO £12.38 £9.913/8 3.0 16NR3.0ISO £12.38 £9.91 16ER3.0ISO £12.38 £9.91



Usual price

Price today

3/8 0.5-1.5 16NRA60 £12.38 £9.91 16ERA60 £12.38 £9.913/8 1.75-3.0 16NRG60 £12.38 £9.91 16ERG60 £12.38 £9.913/8 0.5-3.0 16NRAG60 £12.38 £9.91 16ERAG60 £12.38 £9.91



Usual price

Price today

3/8 0.5-1.5 16NRA55 £12.38 £9.91 16ERA60 £12.38 £9.913/8 1.75-3.0 16NRG55 £12.38 £9.91 16ERG60 £12.38 £9.913/8 0.5-3.0 16NRAG55 £12.38 £9.91 16ERAG60 £12.38 £9.91

ThreadingPartial profile 55° right hand • For threading Whitworth threads • Designed for partial profiles • Three cutting edges

Partial profile 60° right hand • For threading of metric and UN threads

• Designed for partial profiles • Three cutting edges

Full profile ISO metric right hand • For threading of ISO metric threads

• Produces full thread • Three cutting edges


NOW ONLY £9.91

It's the centre of attention.

Turn to page 16

Don't lose the thread –

turn to page 12 instead!

There's nothing

run of the mill about

these! See pages

14 & 15WNMG 0804...T9325 • For all general external turning operations

• Holders available in left hand or right hand

• Holder design incorporates top clamp for increased security

20xWNMG 0804 inserts... T9325 inserts plus 1xDWLN 2020 K08 holder (left or right hand)OR 20xWNMG 0804 inserts...T9325 inserts plus 1xDWLN 2525 M08 holder (left or right hand)

NOW ONLY £99.99

Buy 20 inserts

and get a holder

free



12 Threading Our experts are waiting to take your call on 01753 685926

The quick and easy way to repair damaged threads or to create stronger threads in alloys and composite materials in original equipment. • Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplify changeover from unified to metric or vice versa

• Kit contains: quality HSS tap, installation tool, precision stainless steel inserts and instructions

• Please note: insert kits greater than 12mm are not supplied with corresponding drill bit

Thread repair kits

Description Inserts Order code Usual price Price todayM3x0.50 10 RCL35038 £25.59 £23.88M4x0.70 10 RCL35048 £20.99 £19.59M5x0.80 10 RCL35058 £20.99 £19.59M6x1.00 10 RCL35068 £19.99 £18.65M7x1.00 10 RCL35078 £23.99 £22.39M8x1.25 10 RCL35088 £19.99 £18.65M9x1.25 10 RCL35098 £29.99 £27.99M10x1.50 10 RCL35108 £24.99 £23.32M11x1.50 5 RCL35118 £39.99 £37.32M12x1.75 5 RCL35128 £31.99 £29.85M14x2.00 5 RCL35148 £40.99 £38.25M16x2.00 5 RCL35168 £48.49 £45.25M18x2.50 5 RCL35188 £70.16 £65.48M20x2.50 5 RCL35208 £85.99 £80.25


FROM ONLY £18.65

Metric coarse 1066 straight flute hand taps • Straight flute taps for general applications

• Taper, second and bottoming/plug options

Size OALThread length

Shank diameter

Square size

Usual price

Price today

M2x0.4 41.00 8.00 2.50 2.00 £18.63 £11.92M3x0.5 48.00 11.0 3.15 2.50 £9.70 £9.70M4x0.7 53.00 13.00 4.00 3.15 £9.08 £5.45M5x0.8 58.00 16.00 5.00 4.00 £9.37 £5.63M6x1.0 66.00 19.00 6.30 5.00 £9.53 £5.72M8x1.25 72.00 22.00 8.00 6.30 £15.60 £6.51M10x1.5 80.00 24.00 10.00 8.00 £10.84 £8.31M12x1.75 89.00 29.00 9.00 7.10 £19.07 £11.71M16x2.0 102.00 32.00 12.50 10.00 £13.85 £17.41M18x2.5 112.00 37.00 14.00 11.20 £25.14 £25.73M20x2.5 112.00 37.00 14.00 11.20 £19.50 £28.00


FROM ONLY £5.45

E001 • MTT-X MC spiral point machine tap • Multi-application • Powder metallurgy steel for unbeatable wear resistance

• Steam tempered. Also available in TiAIN, Super B, Bright/Steam tempered and Bright finish

• Size range: M3-M24

Size

Thread length (mm)

OAL (mm)

Shank dia (mm)

Square size (mm)

Tap drill size (mm) Order code

Usual price

Price today

M3x0.5 12.5 48.0 3.2 2.5 2.5 E001M3 £20.91 £9.76M4x0.7 14.0 53.0 4.0 3.2 3.3 E001M4 £21.26 £9.92M5x0.8 11.0 58.0 5.0 4.0 4.2 E001M5 £22.41 £10.46M6x1.0 13.0 66.0 6.3 5.0 5.0 E001M6 £22.54 £10.52M8x1.25 16.0 72.0 8.0 6.3 6.8 E001M8 £25.71 £12.00M10x1.5 18.0 80.0 10.0 8.0 8.5 E001M10 £31.29 £14.60M12x1.75 22.0 89.0 9.0 7.1 10.3 E001M12 £40.03 £18.68M16x2.0 24.0 102.0 12.5 10.0 14.0 E001M16 £57.51 £26.84

MTT-X taps


FROM ONLY £9.76

The quick and easy way to repair damaged threads or create stronger threads in alloys and composite materials in original equipment. • Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplify changeover from unified to metric or vice versa

• They reduce thread wear and are interchangeable with other brands of inserts and tooling

Size Inserts Order code Usual price Price todayM3x0.50 10 RCL25033 £2.86 £2.67M4x0.70 10 RCL25043 £2.73 £2.55M5x0.80 10 RCL25053 £2.50 £2.33M6x1.00 10 RCL25063 £2.66 £2.48M7x1.00 10 RCL25073 £2.66 £2.48M8x1.25 10 RCL25083 £3.13 £2.92M10x1.50 10 RCL25104 £4.87 £4.55M12x1.75 10 RCL25123 £6.41 £5.99M14x2.00 5 RCL25143 £4.46 £4.16M16x2.00 5 RCL25163 £5.76 £5.37

Thread repair inserts Usual price: from £2.50 FROM ONLY

£2.33 • 6-12mm • 4-6mm



NOW ONLY £6.68

NOW ONLY £5.76

T-Handle tap wrenchesOrder code:

TWT1Order code:

TWT2

Adjustable tap wrenches Capacity (mm) Order code Usual price Price today1-8 TWA1 £7.86 £3.671-10 TWA2 £8.02 £3.744-12 TWA3 £13.20 £6.165-20 TWA4 £20.11 £9.39

FROM ONLY £3.67 Usual price: from £7.86


13 Threading

E240/241 • Manufactured from premium grade high speed cobalt (HSS-E) for increased hardness and toughness, improved edge strength and longer tool life

• Promotes very high wear resistance but also prevents swarf from sticking to the tool which, in turn, enables increased productivity

• Available in spiral point for through holes and spiral flute for blind holes

• High performance in a wide range of stainless steels

Spiral point E240 (steam tempered) E241 (super-B coated)

Dia (mm)Pitch (mm)

Thread length (mm)

OAL (mm) Order code

Usual price


Usual price

Price today

M3 0.50 9.0 56.0 E240M3 £23.01 £10.74 E241M3 £33.47 £15.62M4 0.70 12.0 63.0 E240M4 £23.36 £10.90 E241M4 £33.99 £15.86M5 0.80 13.0 70.0 E240M5 £24.64 £11.50 E241M5 £35.87 £16.74M6 1.00 15.0 80.0 E240M6 £24.77 £11.56 E241M6 £36.09 £16.84M8 1.25 18.0 90.0 E240M8 £28.29 £13.20 E241M8 £41.14 £19.20M10 1.50 20.0 100.0 E240M10 £34.41 £16.06 E241M10 £50.06 £23.36M12 1.75 23.0 110.0 E240M12 £44.06 £20.56 E241M12 £64.03 £29.88

Spiral flute E238 (steam tempered) E239 (super-B coated)

Dia (mm)Pitch (mm)

Thread length (mm)

OAL (mm) Order code

Usual price


Usual price

Price today

M3 0.50 6.0 56.0 E238M3 £27.51 £12.04 E239M3 £39.94 £17.48M4 0.70 7.0 63.0 E238M4 £27.90 £12.21 E239M4 £40.54 £17.74M5 0.80 8.0 70.0 E238M5 £29.44 £12.88 E239M5 £42.77 £18.71M6 1.00 10.0 80.0 E238M6 £29.57 £12.94 E239M6 £43.11 £18.86M8 1.25 13.0 90.0 E238M8 £33.81 £14.79 E239M8 £49.20 £21.53M10 1.50 15.0 100.0 E238M10 £41.14 £18.00 E239M10 £59.83 £26.18M12 1.75 18.0 110.0 E238M12 £52.54 £22.99 E239M12 £76.46 £33.45

High performance taps


FROM ONLY £10.74

• Suitable for tapping blind holes due to special flute geometry and excellent chip evacuation

• Spiral flute • DIN 371 (M2-M10) • DIN 376 (M12-20)


FROM ONLY £7.42

ISO metric coarse taps DIN 13

Size

Thread length (mm)

OAL (mm)

Shank dia

(mm)Sq

sizeTapping drill dia Order code

Usual price

Price today

M2x0.4 8 45 2.8 2.1 1.6 TM72100200 £23.83 £11.12M2.2x0.45 8 45 2.8 2.1 1.75 TM72100220 £26.64 £12.43M2.5x0.45 9 50 2.8 2.1 2.05 TM72100250 £19.68 £9.18M3x0.5 6 56 3.5 2.7 2.5 TM72100300 £15.90 £7.42M3.5x0.6 7 56 4 3 2.9 TM72100350 £17.95 £8.38M4x0.7 7 63 4.5 3.4 3.3 TM72100400 £16.35 £7.63M5x0.8 8 70 6 4.9 4.2 TM72100500 £17.31 £8.08M6x1.0 10 80 6 4.9 5 TM72100600 £17.37 £8.11M7x1.0 10 80 7 5.5 6 TM72100700 £22.42 £10.46M8x1.25 13 90 8 6.2 6.8 TM72100800 £23.13 £10.79M10x1.5 15 100 10 8 8.5 TM72101000 £29.07 £13.56M12x1.75 18 110 9 7 10.2 TM72101200 £39.35 £18.36

HSSE machine taps973 • Straight flute NPT

FROM ONLY £23.84Size

OAL (mm)

Thread length (mm)

Shank dia

(mm)Square

size

Core hole dia

Order code

Usual price

Price today

1/16x27 56 14 6 4.9 6.15 973 £51.11 £23.84⅛x27 63 15 7 5.5 8.4 973 £56.49 £26.36¼x18 63 21 11 9 11.1 973 £70.90 £33.08⅜x18 70 21 12 9 14.3 973 £83.11 £38.79½x14 80 27 16 12 17.9 973 £115.78 £54.03¾x14 100 27 20 16 23.3 973 £152.66 £71.24

1x11.5 110 32 25 20 29.0 973 £215.33 £100.48


33 piece tap and die setTools carefully selected for the professional technician from the Premier Line range and come with no quibble lifetime warranty. • Set contains: Taps & dies: 3x0.5, 4x0.7, 5x0.8, 6x1, 8x1.25, 10x1.5, 12x1.75mm, UNF ¼"-28, 5/16"-24, ⅜"-24, 7/16"-20, ½"-20, BSP ⅛"-28, 1/4"-19, tap wrench, T-bar tap wrench, die holder, thread gauge, screwdriver.


NOW ONLY £34.63Order code:

AK3033

We supply products too – just give us a call

F300 • Metric coarse • BS1127:1950 • HSS • Right handed • Bright • Other sizes available from M2x0.40 to M36x4.00

Adjustable dies

FROM ONLY £14.82

SizeOutside

diameter (in) Order code Usual price Price todayM3x0.5 13/16 F300M3X13/16 £31.76 £14.82M4x0.7 13/16 F300M4X13/16 £31.76 £14.82M5x0.8 13/16 F300M5X13/16 £31.76 £14.82M6x1.0 13/16 F300M6X13/16 £31.76 £14.82M8x1.25 1 F300M8X1 £37.71 £17.60M10x1.5 1 F300M10X1 £37.71 £17.60M12x1.75 1.5/16 F300M12X1.5/16 £55.29 £25.80



14 Milling Our experts are waiting to take your call on 01753 685926

• 2 flute options: short, long, extra long

• 3 flute: stub, short, long • Multi flute: short, long • 2 flute ball nose: short, extra long

• Multi flute ball nose: short, long • Multi flute 50° helix short

• 3 flute throw away: short, long • 1 flute for aluminium (plain shank): short, long

• 2 flute for aluminium (flatted shank): short

FROM ONLY £6.22Cobalt milling cutter flatted shank end mills3 flute short length

Mill dia

(mm)

Shank dia

(mm)

Cut L

(mm)OAL (mm)

HSS Co8 order code

Usual price

Price today

TiAIN HSS Co8 order

codeUsual price

Price today

1.5 6.0 7.0 51.0 1041020150 £14.29 £6.67 1041210150 £19.26 £8.992.0 6.0 7.0 51.0 1041020200 £13.34 £6.22 1041210200 £18.00 £8.402.5 6.0 8.0 52.0 1041020250 £14.01 £6.54 1041210250 £18.94 £8.843.0 6.0 8.0 52.0 1041020300 £13.34 £6.22 1041210300 £18.00 £8.403.5 6.0 10.0 54.0 1041020350 £13.57 £6.33 1041210350 £18.54 £8.654.0 6.0 11.0 55.0 1041020400 £13.34 £6.22 1041210400 £18.26 £8.524.5 6.0 11.0 55.0 1041020450 £13.94 £6.51 1041210450 £18.51 £8.645.0 6.0 13.0 57.0 1041020500 £13.34 £6.22 1041210500 £18.26 £8.525.5 6.0 13.0 57.0 1041020550 £13.94 £6.51 1041210550 £18.46 £8.616.0 6.0 13.0 57.0 1041020600 £14.35 £6.70 1041210600 £19.29 £9.006.5 10.0 16.0 66.0 1041020650 £14.70 £6.86 1041210650 £26.46 £12.357.0 10.0 16.0 66.0 1041020700 £14.70 £6.86 1041210700 £26.46 £12.357.5 10.0 16.0 66.0 1041020750 £14.70 £6.86 1041210750 £26.46 £12.358.0 10.0 19.0 69.0 1041020800 £15.29 £7.13 1041210800 £23.46 £10.958.5 10.0 19.0 69.0 1041020850 £19.59 £9.14 1041210850 £31.83 £14.859.0 10.0 19.0 69.0 1041020900 £19.21 £8.96 1041210900 £31.43 £14.67

10.0 10.0 22.0 72.0 1041021000 £17.34 £8.09 1041211000 £27.20 £12.6912.0 12.0 26.0 83.0 1041021200 £20.55 £9.59 1041211200 £30.60 £14.2814.0 12.0 26.0 83.0 1041021400 £25.91 £12.09 1041211400 £36.51 £17.0416.0 16.0 32.0 92.0 1041021600 £31.87 £14.87 1041211600 £49.71 £23.2018.0 16.0 32.0 92.0 1041021800 £34.42 £16.06 1041211800 £56.77 £26.4920.0 20.0 38.0 104.0 1041022000 £40.80 £19.04 1041212000 £65.43 £30.5322.0 20.0 38.0 104.0 1041022200 £58.63 £27.36 1041212200 £85.83 £40.0525.0 25.0 45.0 121.0 1041022500 £69.69 £32.52 1041212500 £102.83 £47.9928.0 25.0 45.0 121.0 1041022800 £90.08 £42.04 1041212800 £123.20 £57.4930.0 25.0 45.0 121.0 1041023000 £101.97 £47.59 1041213000 £135.11 £63.05


FROM ONLY £4.29

Screwed shank multi flute, long series end mills • 3.0-20.0mm diameters have 4 flutes

• 22.0-25.0mm diameters have 6 flutes

• Available in HSS Co8 and HSS • 26-50mm mill diameters available while stocks last

Mill dia

(mm)

Shank dia

(mm)

Cut L

(mm)OAL (mm)

HSS Co8 order code

Usual price

Price today

HSS order code

Usual price

Price today

3.0 6 19 63.5 3082020300 £9.19 £4.293.5 6 25.5 70 3082020350 £14.46 £6.754.0 6 25.5 70 3082020400 £9.19 £4.294.5 6 25.5 70 3082020450 £14.46 £6.755.0 6 31.5 76 3082020500 £9.19 £4.295.5 6 31.5 76 3082020550 £14.46 £6.756.0 6 31.5 76 3082020600 £9.19 £4.296.5 10 35 79.5 3082020650 £19.29 £9.00 3082010650 £9.43 £4.407.0 10 34 79.5 3082020700 £23.37 £10.91 3082010700 £9.43 £4.407.5 10 34 79.5 3082020750 £21.25 £9.92 3082010750 £9.43 £4.408.0 10 34 79.5 3082020800 £13.86 £6.47 3082010800 £7.43 £3.478.5 10 37 82.5 3082020850 £23.37 £10.91 3082010850 £23.89 £11.159.0 10 37 82.5 3082020900 £19.97 £9.32 3082010900 £7.54 £3.52

10.0 10 37 82.5 3082021000 £19.97 £9.32 3082011000 £8.11 £3.7911.0 12 41.5 89 3082021100 £23.40 £10.92 3082011100 £15.71 £7.3312.0 12 49.5 95 3082021200 £17.85 £8.33 3082011200 £10.63 £4.9613.0 12 50 95 3082021300 £26.35 £12.30 3082011300 £21.43 £10.0014.0 12 57 101.5 3082021400 £32.47 £15.15 3082011400 £17.00 £7.9315.0 16 58.5 108.5 3082021500 £39.72 £18.54 3082011500 £25.91 £12.0916.0 16 58.5 108.5 3082021600 £34.85 £16.26 3082011600 £18.63 £8.6917.0 16 67 115 3082021700 £49.72 £23.20 3082011700 £33.49 £15.6318.0 16 70 115 3082021800 £49.09 £22.91 3082011800 £25.31 £11.8119.0 16 76 121.5 3082021900 £57.48 £26.83 3082011900 £38.40 £17.9220.0 16 76 121.5 3082022000 £35.61 £16.62 3082012000 £24.20 £11.2922.0 25 85.5 143 3082022200 £93.43 £43.60 3082012200 £53.86 £25.1323.0 25 92 149 3082022300 £105.11 £49.05 3082012300 £69.03 £32.2124.0 25 92 149 3082022400 £103.30 £48.21 3082012400 £56.51 £26.3725.0 25 100 157 3082022500 £92.60 £43.21 3082012500 £45.03 £21.01


FROM ONLY £13.03

Tungsten carbide parting-off tools

Tool No

Tool dimensions Usual price

Price todayType H (in) W (in) L (in) S (in)

260 A ⅝ ⅜ 4 1 £16.29 £13.03262 A ¾ ½ 5 1¼ £17.89 £14.31264 A 1 ⅝ 5½ 1½ £20.00 £16.00265 A 1 ¾ 5½ 1½ £24.39 £19.51266 A 1¼ ¾ 6½ 1¾ £33.25 £26.60268 A 1½ 1 8 2 £46.12 £36.90270 B ⅝ ⅜ 4 £16.24 £12.99272 B ¾ ½ 5 £16.53 £13.22274 B 1 ⅝ 5½ £23.00 £18.40275 B 1 ¾ 5½ £25.96 £20.77276 B 1¼ ¾ 6½ £32.17 £25.74278 B 1½ 1 8 £44.01 £35.21

Did you know we can supply industrial paint and protective coatings too?

See page 3 for a few examples, call us on 01753 686888 or

email [email protected]

• Available in HSS Co8 and HSS • 26-50mm mill diameters available while stocks last

FROM ONLY £4.44

Screwed shank 2 flute long series slot drill

Mill dia

(mm)

Shank dia

(mm)

Cut L

(mm)OAL (mm)

HSS Co8 order code

Usual price

Price today

HSS order code

Usual price

Price today

2.0 6 3 51 3022020200 £9.51 £4.442.5 6 6.5 54 3022020250 £16.57 £7.733.0 6 11 60.5 3022020300 £11.03 £5.153.5 6 12.5 66.5 3022020350 £16.57 £7.734.0 6 12.5 66.5 3022020400 £11.03 £5.154.5 6 12.5 66.5 3022020450 £16.57 £7.735.0 6 12.5 70 3022020500 £11.03 £5.155.5 6 16 76 3022020550 £16.57 £7.736.0 6 16 76 3022020600 £11.03 £5.156.5 10 16 76 3022020650 £16.80 £7.84 3022010650 £11.89 £5.557.0 10 16 76 3022020700 £17.74 £8.28 3022010700 £11.89 £5.557.5 10 16 76 3022020750 £17.94 £8.37 3022010750 £11.89 £5.558.0 10 19 79.5 3022020800 £17.94 £8.37 3022010800 £11.94 £5.578.5 10 22 82.5 3022020850 £17.94 £8.379.0 10 22 82.5 3022020900 £17.94 £8.37 3022010900 £14.91 £6.969.5 10 22 82.5 3022020950 £17.94 £8.37

Mill dia

(mm)

Shank dia

(mm)

Cut L

(mm)OAL (mm)

HSS Co8 order code

Usual price

Price today

HSS order code

Usual price

Price today

10.0 10 22 82.5 3022021000 £17.94 £8.37 3022011000 £12.37 £5.7711.0 12 22 89 3022021100 £26.77 £12.49 3022011100 £14.46 £6.7512.0 12 25.5 95 3022021200 £24.91 £11.63 3022011200 £11.31 £5.2813.0 12 25.5 95 3022021300 £38.66 £18.04 3022011300 £19.83 £9.2514.0 12 28.5 101.5 3022021400 £32.37 £15.11 3022011400 £14.89 £6.9515.0 16 31.5 108 3022021500 £36.97 £17.25 3022011500 £22.11 £10.3216.0 16 31.5 108 3022021600 £35.94 £16.77 3022011600 £16.66 £7.7717.0 16 35 14.5 3022021700 £49.71 £23.20 3022011700 £30.91 £14.4318.0 16 35 114.5 3022021800 £45.89 £21.41 3022011800 £21.00 £9.8019.0 16 38 120.5 3022021900 £55.23 £25.77 3022011900 £36.46 £17.0120.0 16 38 120.5 3022022000 £47.17 £22.01 3022012000 £23.03 £10.7521.0 25 38 139 3022022100 £74.77 £34.89 3022012100 £61.17 £28.5522.0 25 41.5 140 3022022200 £91.77 £42.83 3022012200 £46.74 £21.8124.0 25 41.5 152.5 3022022400 £91.77 £42.83 3022012400 £55.66 £25.9725.0 25 44.5 159 3022022500 £83.69 £39.05 3022012500 £57.89 £27.01



15 Milling


FROM ONLY £4.39

Solid carbide standard length end mills, plain shank • Available in HSS Co8 and HSS • Also available in short and long series for 2, 3 and 4 flute options

2 flute 3 flute 4 fluteMill dia

(mm)

Shank dia

(mm)

Length of cut (mm)

OAL (mm)

Carbide order code

Usual price

Price today

TiAIN carbide order code

Usual price

Price today

Carbide order code

Usual price

Price today


Usual price

Price today

Carbide order code

Usual price

Price today


Usual price

Price today

1.0 3.0 4.0 38.0 3013030100 £9.41 £4.39 3013230100 £15.40 £7.19 3043030100 £9.41 £4.39 3043230100 £15.40 £7.19 3103030100 £9.41 £4.39 3103230100 £15.40 £7.191.5 3.0 4.5 38.0 3013030150 £9.41 £4.39 3013230150 £15.40 £7.19 3043030150 £9.41 £4.39 3043230150 £15.40 £7.19 3103030150 £9.41 £4.39 3103230150 £15.40 £7.192.0 3.0 6.3 38.0 3013030200 £9.41 £4.39 3013230200 £15.40 £7.19 3043030200 £9.41 £4.39 3043230200 £15.40 £7.19 3103030200 £9.41 £4.39 3103230200 £15.40 £7.192.5 3.0 9.5 38.0 3013030250 £9.41 £4.39 3013230250 £15.40 £7.19 3043030250 £9.41 £4.39 3043230250 £15.40 £7.19 3103030250 £9.41 £4.39 3103230250 £15.40 £7.193.0 3.0 12.0 38.0 3013030300 £9.41 £4.39 3013230300 £15.40 £7.19 3043030300 £9.41 £4.39 3043230300 £15.40 £7.19 3103030300 £9.41 £4.39 3103230300 £15.40 £7.193.5 4.0 12.0 50.0 3013030350 £12.95 £6.04 3013230350 £18.94 £8.84 3043030350 £12.95 £6.04 3043230350 £18.94 £8.84 3103030350 £12.95 £6.04 3103230350 £18.94 £8.844.0 4.0 14.0 50.0 3013030400 £12.95 £6.04 3013230400 £18.94 £8.84 3043030400 £12.95 £6.04 3043230400 £18.94 £8.84 3103030400 £12.95 £6.04 3103230400 £18.94 £8.844.5 6.0 16.0 50.0 3013030450 £16.30 £7.61 3013230450 £22.29 £10.40 3043030450 £16.30 £7.61 3043230450 £22.29 £10.40 3103030450 £16.30 £7.61 3103230450 £22.29 £10.405.0 6.0 16.0 50.0 3013030500 £16.30 £7.61 3013230500 £22.29 £10.40 3043030500 £16.30 £7.61 3043230500 £22.29 £10.40 3103030500 £16.30 £7.61 3103230500 £22.29 £10.406.0 6.0 19.0 58.0 3013030600 £17.08 £7.97 3013230600 £23.09 £10.77 3043030600 £17.08 £7.97 3043230600 £23.09 £10.77 3103030600 £17.08 £7.97 3103230600 £23.09 £10.777.0 8.0 19.0 63.0 3013030700 £18.52 £8.64 3013230700 £27.83 £12.99 3043030700 £18.52 £8.64 3043230700 £27.83 £12.99 3103030700 £18.52 £8.64 3103230700 £27.83 £12.998.0 8.0 20.0 63.0 3013030800 £19.28 £9.00 3013230800 £28.57 £13.33 3043030800 £19.28 £9.00 3043230800 £28.57 £13.33 3103030800 £19.28 £9.00 3103230800 £28.57 £13.339.0 10.0 22.0 75.0 3013030900 £28.78 £13.43 3013230900 £38.09 £17.77 3043030900 £28.78 £13.43 3043230900 £38.09 £17.77 3103030900 £28.78 £13.43 3103230900 £38.09 £17.77

10.0 10.0 22.0 75.0 3013031000 £35.84 £16.72 3013231000 £45.14 £21.07 3043031000 £35.84 £16.72 3043231000 £45.14 £21.07 3103031000 £35.84 £16.72 3103231000 £45.14 £21.0711.0 12.0 25.0 75.0 3013031100 £39.45 £18.41 3013231100 £50.54 £23.59 3043031100 £39.45 £18.41 3043231100 £50.54 £23.59 3103031100 £39.45 £18.41 3103231100 £50.54 £23.5912.0 12.0 25.0 75.0 3013031200 £41.61 £19.42 3013231200 £52.69 £24.59 3043031200 £41.61 £19.42 3043231200 £52.69 £24.59 3103031200 £41.61 £19.42 3103231200 £52.69 £24.5914.0 14.0 32.0 89.0 3013031400 £67.82 £31.65 3013231400 £83.06 £38.76 3043031400 £67.82 £31.65 3043231400 £83.06 £38.76 3103031400 £67.82 £31.65 3103231400 £83.06 £38.7616.0 16.0 32.0 89.0 3013031600 £78.63 £36.69 3013231600 £97.51 £45.51 3043031600 £78.63 £36.69 3043231600 £97.51 £45.51 3103031600 £78.63 £36.69 3103231600 £97.51 £45.5118.0 18.0 38.0 100.0 3013031800 £109.98 £51.32 3013231800 £135.14 £63.07 3043031800 £109.98 £51.32 3043231800 £135.14 £63.07 3103031800 £109.98 £51.32 3103231800 £135.14 £63.0720.0 20.0 38.0 100.0 3013032000 £153.96 £71.85 3013232000 £174.60 £81.48 3043032000 £153.96 £71.85 3043232000 £174.60 £81.48 3103032000 £153.96 £71.85 3103232000 £174.60 £81.4825.0 25.0 38.0 100.0 3013032500 £193.04 £90.09 3013232500 £234.83 £109.59 3043032500 £201.57 £94.07 3043232500 £234.83 £109.59 3103032500 £193.04 £90.09 3103232500 £234.83 £109.59


Cut diameter

2 flute cut length

Shank diameter

(mm)Order code

Usual price

Price today

3 7 6 3195003.0 £6.26 £6.684 8 6 3195004.0 £7.77 £8.295 10 6 3195005.0 £9.27 £9.896 13 6 3195006.0 £9.27 £9.898 16 8 3195008.0 £11.43 £12.20

10 19 10 3195010.0 £17.57 £18.7512 22 12 3195012.0 £26.01 £27.7314 22 14 3195014.0 £37.19 £39.6716 26 16 3195016.0 £45.47 £48.4918 26 18 3195018.0 £65.35 £67.5720 32 20 3195020.0 £76.68 £81.79

Solid carbide end mills3195 • 2 flute plain shank • Centre cutting • Suitable for all general purpose applications

FROM ONLY £6.68 • Also available in short and long reach and 2, 3 and 4 flute options

• Also available in imperial sizes

2 flute

Mill dia (mm)

Shank dia (mm)

Length of cut (mm)

OAL (mm)

Carbide order code

Usual price

Price today


Usual price

Price today

1.0 3.0 4.0 38.0 3133030100 £11.31 £5.28 3133230100 £17.31 £8.081.5 3.0 4.5 38.0 3133030150 £11.31 £5.28 3133230150 £17.31 £8.082.0 3.0 6.3 38.0 3133030200 £11.31 £5.28 3133230200 £17.31 £8.082.5 3.0 9.5 38.0 3133030250 £11.31 £5.28 3133230250 £17.31 £8.083.0 3.0 12.0 38.0 3133030300 £11.31 £5.28 3133230300 £17.31 £8.083.5 4.0 12.0 50.0 3133030350 £15.54 £7.25 3133230350 £25.86 £12.074.0 4.0 14.0 50.0 3133030400 £15.54 £7.25 3133230400 £21.54 £10.054.5 6.0 16.0 50.0 3133030450 £19.57 £9.13 3133230450 £21.54 £10.055.0 6.0 16.0 50.0 3133030500 £19.57 £9.13 3133230500 £25.54 £11.926.0 6.0 19.0 58.0 3133030600 £20.49 £9.56 3133230600 £26.49 £12.367.0 8.0 19.0 63.0 3133030700 £22.23 £10.37 3133230700 £51.94 £24.248.0 8.0 20.0 63.0 3133030800 £23.09 £10.77 3133230800 £32.40 £15.129.0 10.0 22.0 75.0 3133030900 £34.51 £16.11 3133230900 £87.51 £40.84

10.0 10.0 22.0 75.0 3133031000 £43.03 £20.08 3133231000 £52.31 £24.4111.0 12.0 25.0 75.0 3133031100 £47.40 £22.12 3133231100 £54.97 £25.6512.0 12.0 25.0 75.0 3133031200 £49.97 £23.32 3133231200 £61.06 £28.4914.0 14.0 32.0 89.0 3133031400 £81.37 £37.97 3133231400 £128.83 £60.1216.0 16.0 32.0 89.0 3133031600 £94.34 £44.03 3133231600 £110.37 £51.5118.0 18.0 38.0 100.0 3133031800 £135.26 £63.12 3133231800 £206.83 £96.5220.0 20.0 38.0 100.0 3133032000 £203.26 £94.85 3133232000 £214.69 £100.1925.0 25.0 38.0 100.0 3133032500 £274.11 £127.92 3133232500 £287.20 £134.03

Solid carbide 2 flute standard length ball nose end mills

FROM ONLY £5.28



16 Toolholding/Workholding Our experts are waiting to take your call on 01753 685926

KMT A B D G K JMax

weightMax RPM

Max runout Order code Usual price Price today

2 73 32 15 17.780 29 10 170 7,000 0.008 800006709 £138.45 £129.223 74 34 15 23.825 30 11 340 7,000 0.008 800006710 £145.90 £136.174 88.5 42 20 31.267 38 13 700 6,300 0.008 800006245 £181.95 £169.825 119 58 30 44.399 49 14 1400 4,300 0.01 800006711 £278.85 £260.266 164 80 42 63.348 70 18 3000 3,000 0.02 800006712 £469.65 £438.34

Revolving tailstock centre with extended point

FROM ONLY £129.22

• Small body with extended point for finishing, rough turning and grinding use

• Maximum concentricity deviation 0.008-0.01mm


KMT A B D G KMax

weightMax RPM

Max runout Order code Usual price Price today

2 62 32 15 17.780 18 200 7,000 0.005 800006024 £117.45 £109.623 62 34 15 23.825 18 400 7,000 0.005 800006705 £126.80 £118.354 75.5 42 20 31.267 25 800 6,300 0.005 800006706 £154.90 £144.575 104 58 30 44.399 34 1600 4,300 0.01 800006707 £223.05 £208.186 143 80 42 63.348 49 3500 3,000 0.01 800006708 £493.10 £460.23

Revolving tailstock centre


FROM ONLY £109.62

• Small body with 60° tip angle for finishing, rough turning and grinding use

• Maximum concentricity deviation 0.005-0.01mm

ModelCapacity

(mm)Reach (mm)

OAL (mm)

Clamping force (N) Order code

Usual price

Price today

T186-150 150 60 245 11,300 CRVT1866 £74.01 £55.92T186-300 300 60 395 11,300 CRVT18612 £86.41 £65.29T186-500 500 60 640 11,300 CRVT18620 £99.92 £75.49

Rack clamps • Standard duty rack clamps have many uses including welding, metal fabrication, moulding box and die holding, plate fabrication, plastic and fibreglass moulding and maintenance

• Medium duty and long reach jaw options also available


FROM ONLY £55.92

Record vice No

Jaw width (in)

Jaw opening (in)

Jaw depth (in) Usual price Price today

3 4 4¾ 2¾ £107.42 £82.364 4½ 5½ 3 £188.47 £144.495 5 6½ 3¼ £218.30 £167.366 6 8 3½ £324.77 £248.99

Medium duty mechanics vice • Bolts onto benches and worktops • Made from close grained grey cast iron

• CNC machined on all friction surfaces • Vice weight: 33lb/15kg


FROM ONLY £82.36

Set of 5 screwdrivers plus tongue and groove pliers

AS5.170PG • Three flat blade screwdrivers: 3.5 x 75mm; 4 x 100mm; 5.5 x 100mm

• Two Phillips head screwdrivers: 1 x 100mm; 2 x 125mm

• One pair of tongue and groove pliers with 46mm capacity and finger protector 170pg

NOW ONLY £28.49 Usual price:

£31.99