Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
FREENEXT DAY
DELIVERY TOLONDONON ORDERS OVER
£20+VAT
FREENATIONAL DELIVERY ON ORD
ERSOVER£5
0+VAT
Opening Times Monday - Thursday 7.30am - 5.30pm Friday 7.30am - 5.00pmOrbital Fasteners Ltd, Olds Approach, Tolpits Lane, Watford, Herts WD18 9XT
The Handrail System consists of tubes & fittings that are fully compatible with popular systems such as Kee Klamp.
The tubular fittings offer a safe and simple solution to build many different types of lightweight tubular structures to your own size and specification.
Handrail System is a range of fittings manufactured from malleable iron to BS EN 1562:1997 & Ductile iron to BS EN 1563:1997 these fittings require no welding drilling or special tools. A recessed set screw, tightened by the hexagon key, firmly locks the pipe into the fittings. Fittings will support a maximum load of upto 900Kg when tightened to a torque of 39Nm.
Advantages:• Durable galvanised finish• All core products TUV tested and approved • No special tools or labour required
Roof Edge Protection
GRP Plastic Handrail
The DDA Range
HANDRAIL SYSTEM
Steel Tube Steel tube to suit Fast Clamp fittings.
Hot dipped galvanised finish, 3.2M Per 1
1 + 10 +
20 +
3201550
£ 14.54 £ 12.12
£ 10.91
6 (G25)Per 1
1 + 10 +
20 +
3201551
£ 17.52 £ 14.60
£ 13.14
7 (G32)Per 1
1 + 10 +
20 +
3201552
£ 19.97 £ 16.64
£ 14.98
8 (G40)
The short tee is designed to join twotubes at right angles to each other Per 1
1 + 25 +
50 +
3201790
£ 2.28 £ 1.90
£ 1.71
6 (G25)Per 1
1 + 25 +
50 +
3201800
£ 3.18 £ 2.65
£ 2.39
7 (G32)Per 1
1 + 20 +
40 +
3201810
£ 3.70 £ 3.08
£ 2.77
8 (G40)
The sleeve joint will provide aninline joint between two tubes Per 1
1 + 30 +
60 +
3201700
£ 2.58 £ 2.15
£ 1.94
6 (G25)Per 1
1 + 20 +
40 +
3201710
£ 3.50 £ 2.92
£ 2.63
7 (G32)Per 1
1 + 20 +
40 +
3201720
£ 3.47 £ 2.89
£ 2.60
8 (G40)
The 90 elbow will provide a jointbetween two tubes at right anglesto each other
O
Per 1
1 + 25 +
50 +
3201760
£ 2.68 £ 2.24
£ 2.01
6 (G25)Per 1
1 + 20 +
40 +
3201770
£ 3.74 £ 3.11
£ 2.80
7 (G32)Per 1
1 + 15 +
30 +
3201780
£ 4.46 £ 3.72
£ 3.35
8 (G40)
Type C03
Type C00
Type C02
Type C01 The expanding connector is
designed to supply an inlinejoint between two tubes
Per 1
1 + 50 +
100 +
3201730
£ 2.54 £ 2.11
£ 1.90
6 (G25)Per 1
1 + 25 +
50 +
3201740
£ 3.26 £ 2.71
£ 2.44
7 (G32)Per 1
1 + 25 +
50 +
3201750
£ 4.00 £ 3.33
£ 3.00
8 (G40)
33.70mm42.40mm 48.30mm
Tube size6(G25) B34
Tube size7(G32) C42
Tube size8(G40) D48
Next Day Delivery | Order Today, Deliver Tomorrow @ Site • Works • Office • Home
ALL
PRIC
ES A
RE SU
BJE
CT TO
VAT AND A
VAILABILITY
Plastic Scaffold End Cap
Per 100
1 + 200 +
600 +
3201555
£ 5.28 £ 4.40
£ 3.96
Yellow plastic end capfor size 48.30mm8(G40) standard scaffold or hand rail tube.
Type C04 90 Long tee will provide a butt joint
between two tubes at right angles
O
Per 1
1 + 20 +
40 +
3201820
£ 3.72 £ 3.10
£ 2.79
6 (G25)Per 1
1 + 15 +
30 +
3201830
£ 5.22 £ 4.35
£ 3.91
7 (G32)Per 1
1 + 10 +
20 +
3201840
£ 6.00 £ 5.00
£ 4.50
8 (G40)
Type C05 The variable elbow is designed to
make joints at an angle of between 105o
& 165o.
Per 1
1 + 25 +
50 +
3201850
£ 4.40 £ 3.67
£ 3.30
6 (G25)Per 1
1 + 20 +
40 +
3201860
£ 5.84 £ 4.86
£ 4.38
7 (G32)Per 1
1 + 15 +
30 +
3201890
£ 7.33 £ 6.11
£ 5.50
8 (G40)
Type C06
Per 1
1 + 35 +
70 +
3201900
£ 3.18 £ 2.65
£ 2.39
6 (G25)
Spiggot same size as tube
Per 1
1 + 25 +
50 +
3201910
£ 4.56 £ 3.80
£ 3.42
7 (G32)Per 1
1 + 20 +
40 +
3201920
£ 4.77 £ 3.98
£ 3.58
8 (G40)The internal tee joint is designed toprovide an angled joint between a tube& other fittings. A very simple solutionfor inclined handrail & mid-rails.
Type C11 Disc diameter:
6(G25)=89mm7(G32)=102mm8(G40)=114mm
Per 1
1 + 25 +
50 +
3201950
£ 2.81 £ 2.34
£ 2.11
6 (G25)Per 1
1 + 20 +
40 +
3201960
£ 3.48 £ 2.90
£ 2.61
7 (G32)Per 1
1 + 15 +
30 +
3201970
£ 4.75 £ 3.96
£ 3.56
8 (G40)Round base flange with countersunkholes. For wall or base fixing.Mounting holes 7mm
33.70mm42.40mm 48.30mm
Tube size6(G25) B34
Tube size7(G32) C42
Tube size8(G40) D48Fatmax Xtreme Magnetic Level
V shaped metal grove &magnets make this afavourite for scaffold &handrail errectors. Adjustable dial/vial for setting handrail angles.
£ 15.91 Per 1
5016125
250mm
How To Shop: In-Store www.orbitalfasteners.co.uk 01923 777777 [email protected]
ALL
PRIC
ES A
RE SU
BJE
CT TO
VAT AND A
VAILABILITY
Type C07 The 45o Tee is used as a bracing & strut
component for strengthening structures.Per 1
1 + 30 +
60 +
3201921
£ 4.37 £ 3.65
£ 3.28
6 (G25)Per 1
1 + 30 +
60 +
3201922
£ 6.21 £ 5.18
£ 4.66
7 (G32)Per 1
1 + 30 +
60 +
3201923
£ 7.43 £ 6.19
£ 5.57
8 (G40)
Type C12
Per 1
1 + 15 +
30 +
3201980
£ 4.73 £ 3.94
£ 3.55
6 (G25)Per 1
1 + 10 +
20 +
3201990
£ 5.71 £ 4.76
£ 4.28
7 (G32)Per 1
1 + 10 +
20 +
3202000
£ 7.46 £ 6.22
£ 5.60
8 (G40)Standard railing flange provides a base for railings.Mounting holes 14mm
Type C13
Type C14
The railing vertical side support is designed to provide a base for railingsand other structures that need a sidemounted fixing.
Hole size:All 14mm
Per 1
1 + 15 +
30 +
3202010
£ 6.24 £ 5.20
£ 4.68
6 (G25)Per 1
1 + 10 +
20 +
3202020
£ 8.25 £ 6.87
£ 6.19
7 (G32)Per 1
1 + 10 +
20 +
3202030
£ 9.79 £ 8.16
£ 7.34
8 (G40)
The railing horizontal side support isdesigned to provide a base for railingsand other structures that need a sidemounted fixing.
Hole size:All 18mm
Per 1
1 + 15 +
30 +
3202040
£ 7.43 £ 6.19
£ 5.57
6 (G25)Per 1
1 + 10 +
20 +
3202050
£ 9.44 £ 7.87
£ 7.08
7 (G32)Per 1
1 + 5 +
10 +
3202060
£ 10.58 £ 8.82
£ 7.94
8 (G40)
Type C15 Side support will provide a base for
railings that need a side mounted fixing. Mounting holes 11mm
Per 1
1 + 15 +
30 +
3202070
£ 4.68 £ 3.90
£ 3.51
6 (G25)Per 1
1 + 15 +
30 +
3202080
£ 6.85 £ 5.71
£ 5.14
7 (G32)Per 1
1 + 15 +
30 +
3202090
£ 8.05 £ 6.71
£ 6.04
8 (G40)
Type C16 Rail Support for securing handrail
tube to a wall.Mounting holes 9mm
Per 1
1 + 25 +
50 +
3202100
£ 2.93 £ 2.44
£ 2.20
6 (G25)Per 1
1 + 25 +
50 +
3202110
£ 4.22 £ 3.52
£ 3.17
7 (G32)Per 1
1 + 20 +
40 +
3202120
£ 4.94 £ 4.12
£ 3.71
8 (G40)
Type C17
Depth:130mm
The ground socket is designed to provide a base that can be cast into theground to support a post.
Per 1
1 + 5 +
10 +
3202130
£ 9.89 £ 8.24
£ 7.42
6 (G25)Per 1
1 + 5 +
10 +
3202140
£ 18.70 £ 15.58
£ 14.02
7 (G32)Per 1
1 + 5 +
10 +
3202150
£ 19.39 £ 16.16
£ 14.54
8 (G40)
Next Day Delivery | Order Today, Deliver Tomorrow @ Site • Works • Office • Home
33.70mm42.40mm 48.30mm
Tube size6(G25) B34
Tube size7(G32) C42
Tube size8(G40) D48
ALL
PRIC
ES A
RE SU
BJE
CT TO
VAT AND A
VAILABILITY
Can’t see what you need?Send us your enquiry or drawing of yourproject and one of our sales advisor's will assist you with a solution.Email: [email protected]: 01923 777 777
Type C18 Base flange with integrated toeboard
mounting points fittingHole size: 11mm Slot size: 31x11mm
Per 1
1 + 5 +
10 +
3201930
£ 12.94 £ 10.78 £ 9.71
8 (G40)Per 1
1 + 5 +
10 +
3201929
£ 12.01 £ 10.01 £ 9.01
7 (G32)
Type C20
Type C21
3 way 90 elbow will provide a neatcorner for the upper rail of guard rail Per 1
1 + 20 +
40 +
3202160
£ 3.62 £ 3.02
£ 2.72
6 (G25)Per 1
1 + 15 +
30 +
3202170
£ 5.54 £ 4.62
£ 4.15
7 (G32)Per 1
1 + 10 +
20 +
3202180
£ 6.68 £ 5.57
£ 5.01
8 (G40)O
90 Corner. Upright will passthrough the fitting
O
Per 1
1 + 50 +
100 +
3202190
£ 3.08 £ 2.57
£ 2.31
6 (G25)Per 1
1 + 25 +
50 +
3202200
£ 4.35 £ 3.62
£ 3.26
7 (G32)Per 1
1 + 15 +
30 +
3202210
£ 4.89 £ 4.08
£ 3.67
8 (G40)
Type C22
Type C23
Type C24
90 Two socket cross provides the mid-rail joint for handrail. Upright passes through the fitting
O
Per 1
1 + 25 +
50 +
3202220
£ 3.33 £ 2.78
£ 2.50
6 (G25)Per 1
1 + 15 +
30 +
3202230
£ 4.07 £ 3.40
£ 3.06
7 (G32)Per 1
1 + 15 +
30 +
3202240
£ 5.22 £ 4.35
£ 3.91
8 (G40)
Side outlet tee provides a 3 waymid-rail joint for handrail uprightpasses through the fitting
Per 1
1 + 25 +
50 +
3202250
£ 4.30 £ 3.58
£ 3.22
6 (G25)Per 1
1 + 15 +
30 +
3202260
£ 5.94 £ 4.95
£ 4.45
7 (G32)Per 1
1 + 10 +
20 +
3202270
£ 6.66 £ 5.55
£ 4.99
8 (G40)
Four socket cross, the uprightpasses through the fitting Per 1
1 + 20 +
40 +
3202280
£ 6.29 £ 5.24
£ 4.71
6 (G25)Per 1
1 + 10 +
20 +
3202290
£ 8.77 £ 7.31
£ 6.58
7 (G32)Per 1
1 + 10 +
20 +
3202300
£ 9.29 £ 7.74
£ 6.97
8 (G40)
Type C25 The short tee swivel fitting will allow
corner joints of any angle between 90o
& 180o (often used in pairs)
Per 1
1 + 40 +
80 +
3202310
£ 3.18 £ 2.65
£ 2.39
6 (G25)Per 1
1 + 25 +
50 +
3202320
£ 4.07 £ 3.40
£ 3.06
7 (G32)Per 1
1 + 20 +
40 +
3202330
£ 4.20 £ 3.50
£ 3.15
8 (G40)
Type C28 The adjustable 2 socket cross fitting
will accommodate any rake angle from30o to 45o.
Per 1
1 + 10 +
20 +
3202350
£ 8.70 £ 7.25
£ 6.52
7 (G32)Per 1
1 + 10 +
20 +
3202360
£ 10.21 £ 8.51
£ 7.66
8 (G40)
Type C10G
Used in conjunction witha C36G type fitting tomake a C46G type base swivel combination.
111mm50mm Hole size:All 10mm
Per 1
1 + 30 +
60 +
3201940
£ 2.61 £ 2.18
£ 1.96
Swivel Base
How To Shop: In-Store www.orbitalfasteners.co.uk 01923 777777 [email protected]
33.70mm42.40mm 48.30mm
Tube size6(G25) B34
Tube size7(G32) C42
Tube size8(G40) D48
ALL
PRIC
ES A
RE SU
BJE
CT TO
VAT AND A
VAILABILITY
Type C30
Type C29
Type C31
The Collar fitting can be used tosupport the C03 fitting when the latter is used as a hinge.
Per 1
1 + 80 +
160 +
3202400
£ 1.49 £ 1.24
£ 1.12
6 (G25)Per 1
1 + 80 +
160 +
3202410
£ 1.64 £ 1.37
£ 1.23
7 (G32)Per 1
1 + 60 +
120 +
3202420
£ 1.82 £ 1.51
£ 1.36
8 (G40)
This fitting is designed as a gate eyefor light weight gates.Hole size: All 11mm
Per 1
1 + 50 +
100 +
3202430
£ 2.24 £ 1.87
£ 1.68
6 (G25)Per 1
1 + 70 +
140 +
3202440
£ 2.39 £ 1.99
£ 1.79
7 (G32)Per 1
1 + 50 +
100 +
3202450
£ 2.61 £ 2.17
£ 1.96
8 (G40)
Type C32
Type C33
Type C34
The fitting is designed as a gate hingefor light weight gates. Pin size:10mm
Per 1
1 + 50 +
100 +
3202460
£ 2.51 £ 2.09
£ 1.88
6 (G25)Per 1
1 + 80 +
160 +
3202470
£ 2.66 £ 2.22
£ 1.99
7 (G32)Per 1
1 + 40 +
80 +
3202480
£ 2.88 £ 2.40
£ 2.16
8 (G40)
The Hook fitting is designed to providean attachment for chain & netting etc
Per 1
1 + 75 +
150 +
3202490
£ 1.99 £ 1.66
£ 1.49
6 (G25)Per 1
1 + 65 +
130 +
3202500
£ 2.36 £ 1.97
£ 1.77
7 (G32)Per 1
1 + 40 +
80 +
3202510
£ 2.63 £ 2.19
£ 1.98
8 (G40)
The Fixing Pad is designed to providean attachment for flat sheets or board.It may also be used as a gate stop.
Hole size:All 6mm
Per 1
1 + 80 +
160 +
3202520
£ 1.59 £ 1.33
£ 1.19
6 (G25)Per 1
1 + 40 +
80 +
3202530
£ 1.99 £ 1.66
£ 1.49
7 (G32)Per 1
1 + 35 +
70 +
3202540
£ 2.36 £ 1.97
£ 1.77
8 (G40)
The adjustable short tee fitting willaccommodate any rake angle from 30o
to 60oPer 1
1 + 25 +
50 +
3202370
£ 3.14 £ 2.62
£ 2.36
6 (G25)Per 1
1 + 15 +
30 +
3202380
£ 4.32 £ 3.60
£ 3.24
7 (G32)Per 1
1 + 15 +
30 +
3202390
£ 5.06 £ 4.22
£ 3.80
8 (G40)
Type C36F
Type C36M
Per 1
1 + 40 +
80 +
3202580
£ 2.01 £ 1.68
£ 1.51
6 (G25)Per 1
1 + 25 +
50 +
3202600
£ 2.68 £ 2.24
£ 2.01
7 (G32)Per 1
1 + 25 +
50 +
3202620
£ 3.40 £ 2.84
£ 2.55
8 (G40)The Female Swivel. It can be usedwith the C10G, C35, C37 or C38 maleswivel fittings.
The Male Swivel is designed as part ofthe swivel combination group of fittings.It can be used with C36F fittings.
Hole size: All 10mm
Hole size: All 10mm
Per 1
1 + 40 +
80 +
3202590
£ 1.94 £ 1.62
£ 1.45
6 (G25)Per 1
1 + 30 +
60 +
3202610
£ 2.36 £ 1.97
£ 1.77
7 (G32)Per 1
1 + 25 +
50 +
3202630
£ 3.26 £ 2.71
£ 2.44
8 (G40)
Spare Screws C60
Per 1
1 + 10 +
20 +
3203175
£ 0.42 £ 0.35
£ 0.31
1/4” BSP ForG25 fittings
Per 1
1 + 10 +
20 +
3203176
£ 0.45 £ 0.37
£ 0.33
3/8” BSP For G32 & G40 fittings
Next Day Delivery | Order Today, Deliver Tomorrow @ Site • Works • Office • Home
33.70mm42.40mm 48.30mm
Tube size6(G25) B34
Tube size7(G32) C42
Tube size8(G40) D48
ALL
PRIC
ES A
RE SU
BJE
CT TO
VAT AND A
VAILABILITY
Type C37M
Type C38M
Type C35M
Type C41
Type C42
Type C43
The Double Male Swivel. It can beused with two C36 female swivel fittings.
Hole size:All 10mm
Per 1
1 + 40 +
80 +
3202640
£ 2.61 £ 2.18
£ 1.96
6 (G25)Per 1
1 + 25 +
50 +
3202650
£ 2.78 £ 2.32
£ 2.09
7 (G32)Per 1
1 + 30 +
60 +
3202660
£ 3.13 £ 2.61
£ 2.35
8 (G40)
The 90o Corner Male swivel. It can beused with two C36 female swivel fittingsto make a corner combination fitting.
Hole size: All 10mm
Per 1
1 + 45 +
90 +
3202670
£ 3.33 £ 2.77
£ 2.50
6 (G25)Per 1
1 + 40 +
80 +
3202680
£ 3.55 £ 2.96
£ 2.66
7 (G32)Per 1
1 + 35 +
70 +
3202690
£ 3.60 £ 3.00
£ 2.70
8 (G40)
The Male Swivel, can be used on itsown for use with a shackle and chainor with the C36 female swivel to mountrails at any angle for slopes.
Hole size: All 10mm
Per 1
1 + 50 +
100 +
3202550
£ 1.86 £ 1.55
£ 1.40
6 (G25)Per 1
1 + 40 +
80 +
3202560
£ 2.06 £ 1.72
£ 1.55
7 (G32)Per 1
1 + 30 +
60 +
3202570
£ 2.44 £ 2.03
£ 1.83
8 (G40)
The clamp on tee is designed to allowa new tube to be joined to an existingstructure.
Per 1
1 + 30 +
60 +
3202760
£ 5.28 £ 4.40
£ 3.96
6 (G25)Per 1
1 + 25 +
50 +
3202770
£ 5.72 £ 4.76
£ 4.29
7 (G32)Per 1
1 + 20 +
40 +
3202780
£ 6.56 £ 5.46
£ 4.92
8 (G40)
The clamp on crossover is designed toallow a new tube to be joined to an existing structure.
Per 1
1 + 45 +
90 +
3202790
£ 3.06 £ 2.55
£ 2.29
6 (G25)Per 1
1 + 30 +
60 +
3202800
£ 4.05 £ 3.37
£ 3.04
7 (G32)Per 1
1 + 20 +
40 +
3202810
£ 5.17 £ 4.31
£ 3.88
8 (G40)
The combination socket is designed forracking & similar systems to allow acrossover to be combined with a cross tie.
Per 1
1 + 25 +
50 +
3202820
£ 4.00 £ 3.33
£ 3.00
6 (G25)Per 1
1 + 25 +
50 +
3202830
£ 5.33 £ 4.44
£ 4.00
7 (G32)Per 1
1 + 15 +
30 +
3202840
£ 6.46 £ 5.38
£ 4.85
8 (G40)
Type C40 Designed to give a 90 crossover
joint. Upright passes through bothPer 1
1 + 40 +
80 +
3202730
£ 2.54 £ 2.12
£ 1.91
6 (G25)Per 1
1 + 25 +
50 +
3202740
£ 3.33 £ 2.77
£ 2.50
7 (G32)Per 1
1 + 15 +
30 +
3202750
£ 3.95 £ 3.29
£ 2.96
8 (G40)O
Type C45 Single swivel angle will provide an
angled tee between two tubesPer 1
1 + 20 +
40 +
3202850
£ 4.52 £ 3.77
£ 3.39
6 (G25)Per 1
1 + 15 +
30 +
3202860
£ 5.29 £ 4.41
£ 3.97
7 (G32)Per 1
1 + 10 +
20 +
3202890
£ 6.46 £ 5.38
£ 4.84
8 (G40)
Hex Head Screwdrivers T-Handle
How To Shop: In-Store www.orbitalfasteners.co.uk 01923 777777 [email protected]
33.70mm42.40mm 48.30mm
Tube size6(G25) B34
Tube size7(G32) C42
Tube size8(G40) D48
Per 1
1 + 3 +
5 +
4994206
£ 4.07 £ 3.84
£ 3.62
6x188mm6 (G25)
Per 1
1 + 3 +
5 +
4994208
£ 5.76 £ 5.44
£ 5.12
8x223mm7(G32) 8(G40)
Type C48 The 90o Corner Swivel Combination.
Pre assembled Per 1
1 + 10 +
20 +
3202960
£ 8.27 £ 6.89
£ 6.20
6 (G25)Per 1
1 + 5 +
10 +
3202970
£ 9.19 £ 7.66
£ 6.89
7 (G32)Per 1
1 + 5 +
10 +
3202980
£ 11.63 £ 9.69
£ 8.72
8 (G40)
Type C47 The double swivel combination is
designed to provide an in line angledjoint at a stair handrail. Pre assembled
Per 1
1 + 10 +
20 +
3202930
£ 8.27 £ 6.89
£ 6.20
6 (G25)Per 1
1 + 10 +
20 +
3202940
£ 9.37 £ 7.81
£ 7.02
7 (G32)Per 1
1 + 5 +
10 +
3202950
£ 10.43 £ 8.69
£ 7.82
8 (G40)
Type C46 Base swivel combination will provide
an angled wall or floor mount.Mounting holes 9mm
Per 1
1 + 10 +
20 +
3202900
£ 4.89 £ 4.08
£ 3.67
6 (G25)Per 1
1 + 10 +
20 +
3202910
£ 5.79 £ 4.83
£ 4.34
7 (G32)Per 1
1 + 10 +
20 +
3202920
£ 6.53 £ 5.44
£ 4.90
8 (G40)
Type C52 The slope long tee 0o to 11o is
designed to provide a T joint betweentwo tubes for use on ramps.
Per 1
1 + 10 +
20 +
3203040
£ 8.05 £ 6.71
£ 6.04
8 (G40)Per 1
1 + 10 +
20 +
3203039
£ 8.88 £ 7.40
£ 6.66
7 (G32)
Type C54
Per 1
1 + 10 +
20 +
3203060
£ 8.05 £ 6.71
£ 6.04
8 (G40)Per 1
1 + 15 +
30 +
3203059
£ 8.19 £ 6.83
£ 6.15
7 (G32)The slope 2 socket cross 0o to 11o
is designed to provide a joint for themidrail for use on ramps.
ALL
PRIC
ES A
RE SU
BJE
CT TO
VAT AND A
VAILABILITY
Type BC53 Adjustable Elbow is
designed as a variable angle in-line connection,adjustable through 202°
Per 1
1 + 30 +
60 +
3203400
£ 5.69 £ 4.74
£ 4.27
6 (G25)Per 1
1 + 23 +
46 +
3203410
£ 5.81 £ 4.84
£ 4.36
7 (G32)Per 1
1 + 19 +
38 +
3203420
£ 7.08 £ 5.90
£ 5.31
8 (G40)
Type C50 The Slope Elbow 0o to 11o is designed
to provide a elbow joint for use onramps.
Per 1
1 + 10 +
20 +
3203020
£ 7.18 £ 5.98
£ 5.38
8 (G40)Per 1
1 + 15 +
30 +
3203019
£ 9.12 £ 7.60
£ 6.84
7 (G32)
Type C51 The Slope Short Tee 0o to 11o is
designed to provide a T joint betweentwo tubes for use on ramps.
Per 1
1 + 15 +
30 +
3203030
£ 5.52 £ 4.60
£ 4.14
8 (G40)Per 1
1 + 20 +
40 +
3203029
£ 7.06 £ 5.89
£ 5.30
7 (G32)
Can’t see what you need?Send us your enquiry or drawing of yourproject and one of our sales advisor's will assist you with a solution.Email: [email protected]: 01923 777 777
Type C67 The double mesh clip is designed
to provide a fixing for standard meshpanels.
Per 1
1 + 10 +
20 +
3203180
£ 1.54 £ 1.29
£ 1.16
6 (G25)Per 1
1 + 10 +
20 +
3203190
£ 1.56 £ 1.30
£ 1.17
7 (G32)Per 1
1 + 10 +
20 +
3203200
£ 1.62 £ 1.35
£ 1.21
8 (G40)
Galvanised Saddle Clamp
W. 40mmS. 12mmT. 4mmD. see diagram aboveSee our website for more application images
For connecting handrail tubes to timber orchannel system. Hole spacings allow boltingthrough slotted channel sections.
Per 1
1 + 20 +
100 +
3201600
£ 2.64 £ 2.20
£ 1.98
6 (G25)Per 1
1 + 20 +
100 +
3201610
£ 2.76 £ 2.30
£ 2.07
7 (G32)Per 1
1 + 20 +
100 +
3201620
£ 2.88 £ 2.40
£ 2.16
8 (G40)
33.70mm42.40mm 48.30mm
Tube size6(G25) B34
Tube size7(G32) C42
Tube size8(G40) D48
A four way socket fittingused to construct the eavesof a roof structure.
Per 1
1 + 10 +
20 +
3203080
£ 9.56 £ 7.97
£ 7.17
8 (G40)
Type C56
Type C55
Type C65P
Type C65G
Per 1
1 + 100 +
200 +
3203120
£ 0.27 £ 0.23
£ 0.21
6 (G25)Per 1
1 + 100 +
200 +
3203130
£ 0.42 £ 0.35
£ 0.32
7 (G32)Per 1
1 + 100 +
200 +
3203140
£ 0.42 £ 0.35
£ 0.32
8 (G40)Plastic Plug to fit open endedtubes. “Knock in to Fit”
Per 1
1 + 50 +
100 +
3203145
£ 2.40 £ 2.00
£ 1.80
6 (G25)Per 1
1 + 50 +
100 +
3203146
£ 4.18 £ 3.48
£ 3.13
7 (G32)Per 1
1 + 50 +
100 +
3203147
£ 4.93 £ 4.11
£ 3.70
8 (G40)Galvanised Steel Plug. Fits only 3.2mm wall thickness tubes
ALL
PRIC
ES A
RE SU
BJE
CT TO
VAT AND A
VAILABILITY
A four way socket fitting used toconstruct the ridge of a roof structure.
Per 1
1 + 10 +
20 +
3203070
£ 11.63 £ 9.69
£ 8.72
8 (G40)
Type C66 The Single Mesh Clip is designed to
provide a fixing for standard mesh panels.
Per 1
1 + 10 +
20 +
3203150
£ 0.94 £ 0.79
£ 0.71
6 (G25)Per 1
1 + 10 +
20 +
3203160
£ 1.07 £ 0.89
£ 0.80
7 (G32)Per 1
1 + 10 +
20 +
3203170
£ 1.07 £ 0.89
£ 0.80
8 (G40)
Type C53 Slope Base 0o to 11o will provide a
base for use on ramps. Mounting holes 14mm
Per 1
1 + 10 +
20 +
3203050
£ 8.82 £ 7.35
£ 6.61
8 (G40)Per 1
1 + 10 +
20 +
3203049
£ 8.88 £ 7.40
£ 6.66
7 (G32)
Tube diameter33.7x3.2mm
6(G25)
814 1369 1828
396
360 N/m
740 N/m 666 889
1951500 N/m 329 439
42.4x3.2mm7(G32)
Maximum Upright Centres (mm)
900 mm high
48.3x3.2mm8(G48)
Design Load
732 1232 1645
356
360 N/m
740 N/m 599 800
1761500 N/m 296 395
1000 mm high
666 1120 1496
324
360 N/m
740 N/m 545 728
1601500 N/m 269 359
1100 mm high
GUARDRAILGuardrail is the most common form of structure that is built with Handrail fittingsand requires careful consideration to meetrequired design loadings. Design loads areusually specified, however if unsure BS 6399and BS 6180 are good reference documents.
The loading capacity of any guardrail structure is determined principally by the diameter, thickness and frequency of its uprights. The table below contains recommendations to safely meet the stateddesign loads based on maximum permissiblebending moment of the upright tube.
Use this table to work out the safe working load and upright spacing:
YOU MAY ALSO NEED...Hexagon Head Multi-Substrate Anchors (Screw Bolts)
Anchor Resin Studs
Through Bolts
Sleeve Anchors
Hexagon Head Coach Screws
Nylon Plugs
Timco Multi-Fix Concrete Screws
SDS Drill Bits
Masonry Drill Bits
Self Tapper & Self Drill Screws
NEW!
each
1 + 10 +
30 +
3204000
3204010
£ 19.75 £ 16.46
£ 14.81
Universal 3 way tee connector (In three pieces)
3 way tee connector(In two halves)
each
1 + 10 +
30 +
3204020
3204030
£ 4.92 £ 4.10
£ 3.69
4 way cross connector(In two halves)
each
1 + 10 +
30 +
3204035
3204040
£ 5.78 £ 4.82
£ 4.34
each
1 + 10 +
30 +
3204070
3204080
£ 7.46 £ 6.22
£ 5.60
90 degree elbow(In two halves)
120 degree right angle bend(In two halves)
Universal Universal 4 wayconnector (In four pieces)
each
1 + 10 +
30 +
3204050
3204060
£ 35.04 £ 29.20
£ 26.28
each
1 + 10 +
30 +
3204090
3204100
£ 7.63 £ 6.36
£ 5.72
Round hole base foot(Single piece)
each
1 + 10 +
30 +
3204160
3204170
£ 9.02 £ 7.52
£ 6.76
5mm Neoprene foot padSuits MHBF base foot
60 degree 3 way tee(In two halves )
each
1 + 10 +
30 +
3204110
3204120
£ 5.59 £ 4.66
£ 4.19
60 degree 4 way tee(In two halves)
each
1 + 10 +
30 +
3204130
3204140
£ 7.27 £ 6.06
£ 5.45
Triangular base foot(Single piece)
each
1 + 20 +
60 +
3204150
£ 8.95 £ 7.46
£ 6.71
3 way corner(In two halves)
each
1 + 10 +
30 +
3204180
3204190
£ 13.07 £ 10.88 £ 9.79
4 way corner(In two halves)
each
1 + 10 +
30 +
3204200
3204210
£ 15.65 £ 13.04
£ 11.74
Right angle bend(In two halves)
each
1 + 10 +
30 +
3204220
3204230
£ 10.44 £ 8.70
£ 7.83
Side fit base(Single piece)
each
1 + 10 +
30 +
3204240
3204250
£ 9.31 £ 7.76
£ 6.98
Spigot internal coupler M6 flange rivet nut 0.50 - 3.0 Stainless Steel
each
1 + 10 +
30 +
3204300
3204310
£ 6.91 £ 5.76
£ 5.18
Universal joint connector(In t wo halves)
each
1 + 10 +
30 +
3204260
3204270
£ 19.01 £ 15.84
£ 14.26
Handrail tube 5 Metre*50mm/OD x 40mm/ID
each
1 + 10 +
20 +
3204280
3204290
£ 72.00 £ 60.00
£ 54.00
GLASS REINFORCED PLASTIC (GRP) HANDRAIL SYSTEM AVAILABLE IN YELLOW & GREY
Per 1000
1 + 250 +
1250 +
1641520
£ 270.77 £ 225.64
£ 203.07
High strength & stability Easy to install Lightweight Low thermal conductivity
Corrosion, chemical & weather resistant
MH3WU
MH90E
9mm bolt holes
MHRAB MHUJ
MH-CORNER
3W
MHA3E MHA4EMHA120E
MH3W MH4W MH4WU
TU550I
MH-CORNER
4W
SPIGOT
M6x45buttonsocketscrews tobe usedwith thespigot.
MHNFP
Per 100
1 + 200 +
1000 +
2051251
£ 15.04 £ 9.40
£ 8.46
M6x45
Button socket screwStainless Steel A2
Per 100
1 + 200 +
1000 +
2051262
£ 22.05 £ 13.78
£ 12.40
M6x60
each
1 + 10 +
30 +
3204175
£ 2.18 £ 1.82
£ 1.84
13mm bolt holes
7mm bolt holes
MHSF
MHABF MHBF
Fittings have to be drilled on site to enable button screws (7mm holes) & rivet nuts (9mm holes) to be installed.
*5 M etre sections may incur additional delivery charges & extended delivery time, this depends on your location & transport availability.
Tube End cap black
each
1 + 10 +
30 +
3204320
£ 1.18 £ 0.98
£ 0.88
MHTC
Counterweight 1M Long RE11P40SS & 2M Long RE11P40
Upright Post 1100mm Tall RE00G40 Curved Post 1100mm Tall RE00G40SS
Run End Counterweight 2M Long RE12P40
The RE11P40 is a recycled PVC counterweightcontaining a C30G40 collar fitting and a choiceof 1 or 2 metre tubes. The 25kg counterweights are fitted on each or every other post, maximum distance between counterweights - 4 metres. The counterweight is slim and deemed a low trip hazard.
£ 90.92 Per 1
3205030 £ 95.59 Per 1
3205020
1 MetreRE11P40SS
2 MetreRE11P40
The RE12P40 is a run-end counterweight assembly used on all systems witha "free end". Containing 2no 25kg Recycled PVC counterweights, 2noC30G40 collar fittings, 1no C03G40 short tee fitting, 1no Solid 690mm barand 1no 2 metre tube. This part is supplied loose for site assembly.
£ 172.48 Per 1
3205040
2 MetreRE12P40
£ 48.13 Per 1
3205000
Upright PostRE00G40
£ 154.87 Per 1
3205010
Curved PostRE00G40SS
Sleeve Joint C00 Size 8 (G40)
Variable Elbow C05 Size 8 (G40)
90 Degree Elbow C02 Size 8 (G40)
Base Flange C11 Size 8 (G40)
The sleeve joint is designed to provide an in line joint between two tubes ofthe same diameter. Tube joints should be staggered i.e not in line vertially. Requires 8mm hex Allen key.
Per 1
1 + 20 +
40 +
3201720
£ 3.47 £ 2.89
£ 2.60
Size 8 (G40)
The 90 degree elbow is designed to providea joint between two tubes at right angles toeach other. Often used for railing ends & corners. Requires 8mm hex Allen key.
Per 1
1 + 15 +
30 +
3201780
£ 4.46 £ 3.72
£ 3.35
Size 8 (G40)
The Variable Elbow isdesigned to make jointsat an angle of between105deg & 165degRequires 8mm hexAllen key
Per 1
1 + 15 +
30 +
3201890
£ 7.33 £ 6.11
£ 5.50
Size 8 (G40)The wall flange is designedto provide a positional wallor base fixing. It is not recommended to use this fitting as a structural railing base. Mounting holes 7mm.
Per 1
1 + 15 +
30 +
3201970
£ 4.75 £ 3.96
£ 3.56
Size 8 (G40)
Requires 8mm hex Allen key
Disc diameter: 114mm
Steel tube to suit Fast Clamp Fittings.Hot dipped galvanised finish 3.2M
STEEL TUBE SIZE 40 (48.3mm) x 3.2MPer 1
1 + 10 +
20 +
3201552
£ 19.97 £ 16.64
£ 14.98
Size 8 (G40)48.3mmx3.2m
48.30mm
Size 8(G40)D48
ALL
PRIC
ES A
RE SU
BJE
CT TO
VAT AND A
VAILABILITY
The RE00T40SS is a 48mm diameter, 1100mm highcurved factory assembled upright comprising: 3no.Cradles, 1no. Post base & 1no. End Cap. Maximum
distance between post centres - 2 metres.
The RE00T40 is a 48mm diameter, 1100mm tall factory assembled upright comprising: 2no. Cradles, 1no. Post base & 1no. End Cap.
Maximum distance between post centres - 2 metres.
NEW toe-boardadaptor
48mm
42mm
NEW toe-boardadaptor
48mm
42mm
FLAT ROOF EDGE PROTECTION BARRIER
Upright Connector DDA01 Upright Base C12
Intermediate Bracket DDA04
End Return DDA05
90 Degree Bend DDA06
Plastic End Cap DDA08
Handrail Adjustable Bend DDA09
Internal Expanding Connector DDA07
Wall Bracket DDA03
Handrail Connector DDA02
Note: Sockets are 7G32 (top rail) &8G40 (upright)
Steel Tube
Per 1
1 + 10 +
20 +
3201551
£ 17.52 £ 14.60
£ 13.14
7 (G32)
Per 1
1 + 25 +
50 +
3203320
£ 12.40 £ 10.33 £ 9.30
7 (G32)
Per 1
1 + 10 +
20 +
3201552
£ 19.97 £ 16.64
£ 14.98
8 (G40)
Per 1
1 + 25 +
50 +
3203310
£ 11.88 £ 9.90
£ 8.91
Per 1
1 + 20 +
40 +
3203330
£ 13.91 £ 11.59
£ 10.43
7 (G32)
Per 1
1 + 25 +
50 +
3203340
£ 13.54 £ 11.28
£ 10.15
7 (G32)
Per 1
1 + 20 +
40 +
3203350
£ 14.61 £ 12.17
£ 10.95
7 (G32)
Per 1
1 + 15 +
30 +
3203360
£ 18.36 £ 15.30
£ 13.77
7 (G32)
Per 1
1 + 20 +
40 +
3203390
£ 24.74 £ 20.62
£ 18.56
7 (G32)
Per 1
1 + 100 +
200 +
3203140
£ 0.42 £ 0.35
£ 0.32
8 (G40)
Disc diameter:90mm Suits6mm screws
Disc diameter:90mm Suits6mm screws
Fits into DDA01Suits 6mmscrews
Fits into DDA01 Use DDA07to connect to 7(G32) steel tube
Connects to7 (G32) steeltube.
Per 1
1 + 100 +
200 +
3203130
£ 0.42 £ 0.35
£ 0.32
7 (G32)
Per 1
1 + 25 +
50 +
3201740
£ 3.26 £ 2.71
£ 2.44
7 (G32)
Note: 7G32 (top rail) &8G40 (upright)
Per 1
1 + 10 +
20 +
3202000
£ 7.46 £ 6.22
£ 5.60
8 (G40)Standard railing flangeprovides a base for railings.Mounting holes 14mm
ALL
PRIC
ES A
RE SU
BJE
CT TO
VAT AND A
VAILABILITY
THE DDA RANGEDDA is short for the Disability Discrimination Act. Our DDA system comprises of vertical 48.3mm 8(G40)tubes & 42.4mm 7(G30) tubes for the handrail. The system allows simple installation to any gradient.
Designed to satisfy the requirements ofPart ‘M’ of the buildings Regulations 2004
Pozi Tritap Screws & Drill Bits
Per 100
1 + 1000 +
5000 +
4985310
£ 2.68 £ 1.34
£ 1.21
M5x20 Pz2Used to connecthandrail tobrackets Per 1
1 + 10 +
30 +
1191120
£ 1.87 £ 1.56
£ 1.40
4.5x80mm