Upload
vuongthien
View
219
Download
4
Embed Size (px)
Citation preview
Glazing Bars
Dwg Dwg Revision RevNo Description Description DateGB-3-IN01 Index Page - - - - -GB-3-001 Extrusions - - - - -GB-3-002 Extrusions - - - - -GB-3-003 Extrusions - - - - -GB-3-004 Extrusions - - - - -GB-3-005 Extrusions - - - - -
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
ExtrusionsN/A N.T.S
Glazing Bars - Extrusions GB-3-IN01
REV: -
300310Cap
300107Outer Frame
300108Rafter
COMPONENT BR508ex 72122 Shoe
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
ExtrusionsN/A 1:1
Glazing Bars - Extrusions GB-3-001
REV: -
NOTE:This section has a minimum purchaserequirement of 150kg, approx. 55m
300109Purlin
300313Small Rafter
300312Large Rafter
300105Large Purlin
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
ExtrusionsN/A 1:1
Glazing Bars - Extrusions GB-3-002
REV: -
Extrusion Profiles Universal Glazing
302449Cap
302448Base
225064Bead
229060Bead
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
ExtrusionsN/A 1:1
Glazing Bars - Extrusions GB-3-003
REV: -
308702Glazing Bar THM Mullion/Frame Finned
308703Glazing Bar THM Mullion/Frame
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
ExtrusionsN/A 1:1
Glazing Bars - Extrusions GB-3-004
REV: -
Extrusion Profiles Iluminex Glazing Bars
302914Glazing Bar
302915 BR515
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
ExtrusionsN/A 1:1
Glazing Bars - Extrusions GB-3-005
REV: -
Dwg Dwg Revision RevNo Description Description DateGB-4-IN01 Index Page - - - - -GB-4-001 'I'-Values - - - - -
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
'I'-ValuesN/A N.T.S
Glazing Bars - 'I'-Values GB-4-IN01
REV: -
Profile Description'I'cm4
WindPressure
PartNo.
Moment of Inertia
300107 OUTER FRAME 60.43
300108 RAFTER 76.44
300109 PURLIN 19.6
300312 LARGE RAFTER 196.24
300313 SMALL RAFTER 16.13
301518 ARCADIA BAR 42.26
302914 GLAZING BAR 8.74
308702 Thermal Glazing Bar Finned 145.45
308703 Thermal Glazing Bar 44.18
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
'I'-ValuesN/A N.T.S
Glazing Bars - 'I'-Values GB-4-001
REV: -
Dwg Dwg Revision RevNo Description Description DateGB-5-IN01 Index Page - - - - -GB-5-001 Hardware - - - - -GB-5-002 Hardware - - - - -GB-5-003 Hardware - - - - -GB-5-004 Hardware - - - - -GB-5-005 Hardware - - - - -GB-5-006 Hardware - - - - -
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
HardwareN/A N.T.S
Glazing Bars - Hardware GB-5-IN01
REV: -
300241, 300242 BAR,
300130, 300131 BAR,
length of
backing seal50811
(E2091/S)backing seal
50878
(Dynex 934)backing seal
50090
GASKETGLAZING
WM50090
WM50090
gasketglazing
note 1
CAP FIXINGSCREW
12-18mm
6-10mm
4-5mm
thicknessglazing
300243 CAP
300132 CAP
1 3/4"
1 1/2"
1 1/4"
1"
length ofscrew
25mm
300107, 300108, 300109,300312 BARS, 300310 CAP
1/2"
3/4"
*1/2"
screw*
glazinggasket
50878
20-24mm
12-18mm
6-10mm
thicknessglazing
305199 BAR,
length
3/16
" B
SW
GASKETGLAZING
mac
hine
scr
ews/
stee
l c/s
unk
slot
hea
d
gasketglazing
FIXINGSCREW
5mm
4mm
thicknessglazing
305200 CAP
3/8"
3/8"
3/8"
of screwglazinggasket thickness
glazing
backing seal50842
backing seal50840
wedge50545
6mm
8mm
10mm
18mm
flashing
1/2"
1/2"
1/2"
WM501c/501c
WM503/503
WM503/503
WM503/503
WM503/503
WM503/503
WM503/501c 1"
301518 ARCADIA BAR301517 ARCADIA BEAD
gasketglazing glazing
thickness
4mm
6mm
8mm
50840/50545
50842/50545
50842/50560
GASKET & SCREWLENGTH TO SUIT APPLICATION
50845wedge
CAP
50878
50878
50878
wedge50560
*Available ex FAL service centre,Part No. FA78009 NOTE 1: Use 50878 backing seal in cap and 50090 backing seal in bar or vice versa
3/16
" B
SW
mac
hine
scre
w s
/ste
elc/
sunk
slo
t hea
d
302448GLAZING BASE
302449 CAP
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
HardwareN/A N.T.S
Glazing Bars - Hardware GB-5-001
REV: -
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
HardwareN/A N.T.S
Glazing Bars - Hardware GB-5-002
REV: -
30° cut
Sloped GlazingNZS 4223: 1985 clause 103.11.1 states
"Sloped glazing is a term applied to glazing that is sloped more than 15 degrees from thevertical" and "Grade A safety glass shall be used on all sloped and overhead glazing."
It is recommended that laminated glazing be used in lieu of toughened for safety reasons.If broken the PVB interlayer will prevent disintegration and also act as a preventativebarrier against penetration. However 6mm laminate should not exceed 700mm width.
50x 40x 4 Aluminium Box Section(609698) Aluminium spigot300108 & 300312 Rafter bars
3/4"x8g S/S0311 Fixing shoeShoe fixing to bars
CP72052, CP72053 end caps3/4"x6g S/SGeneral assembly
1/8" Monel steelPop-rivets0109 Purlin stops
3/4"x10g S/SCP72050, CP72051 end capsCP72052, CP72053 end capsGeneral assembly
Screws and rivets
78570Corner Gusset
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
HardwareN/A N.T.S
Glazing Bars - Hardware GB-5-003
REV: -
Purlin Stopex colonial bar 40mm long for300108 & 300312 rafter bars
Glass StopFor 300109 purlin barex 3mm aluminium flat.40mm long, height to suit glazingNon Stocked
Aluminium End Cap300242/300243 small barNon Stocked
Aluminium end cap300241/300243 large barNon Stocked
Stops For The 0109 Series Purlins.
End-Caps For The 60mm Wide Sections
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
HardwareN/A N.T.S
Glazing Bars - Hardware GB-5-004
REV: -
R 4.5
R 4.5 csk
Fixing shoe - FAL 609051ex 50 x 3mm aluminium flatfor 300130,300131 bars Non Stocked
End-Caps For The 60mm Wide Sections.
Fixing ShoeBR508 (stocked in 5.0m only) for 300108,300312 bars
Fixing shoe - FAL 609051ex 50 x 3mm aluminium flatfor 300241,300242 bars Non Stocked
Factory Fitted Fixing Shoes
R 4.5
R 4.5 csk
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
HardwareN/A N.T.S
Glazing Bars - Hardware GB-5-005
REV: -
End Caps to be 3mm thick AluminiumFabricators to make
78607Nylon Fin End Cap
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
HardwareN/A N.T.S
Glazing Bars - Hardware GB-5-006
REV: -
Dwg Dwg Revision RevNo Description Description DateGB-7-IN01 Index Page - - - - -GB-7-C01 Elevation - - - - -GB-7-001 Jamb Detail - - - - -GB-7-001 Bar Fixing Detail - - - - -GB-7-002 Transom / Purlin Detail - - - - -GB-7-003 Transom / Purlin Detail - - - - -GB-7-004 Plan view of rafter / Purlin Junction - - - - -GB-7-005 Section through PurlinGB-7-006 Jamb Detail - DG - - - - -GB-7-007 Section through BR515 (302915) - - - - -GB-7-008 Fixing Shoe Machining Details - - - - -GB-7-009 Universal Glazing Bars - - - - -GB-7-010 Universal Glazing Bars - - - - -GB-7-011 Jamb Detail - - - - -GB-7-012 Jamb Detail - - - - -GB-7-013 Purlin Detail - - - - -GB-7-014 Purlin Detail - - - - -GB-7-015 Glazing Bar Detail - - - - -
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Cross SectionsN/A N.T.S
Glazing Bars - Cross Sections GB-7-IN01
REV: -
001
004
004
Mono Pitched Canopy
003
002010
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
ElevationsN/A 1:1
Glazing Bars - Cross Sections GB-7-C01
REV: -
011/012
004
013/014
015
015
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
ElevationsN/A 1:1 Therma
Glazing Bars - Cross Sections GB-7-C02
REV: -
300107
Transom notch for300109 onto 300107
Jamb flashingfixed to cap
Glazing bar cap40 x 40 x 3mm(FAL 609130)
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Jamb DetailN/A 1:1
Glazing Bars - Cross Sections GB-7-001
REV: -
300108
300310
8g screw
72122 Fixing shoe
Transom notch for300109 onto 300108
WM51024Backing seal
WM51024 or WM50090Backing seal
3/16"csk machine screw
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Bar Fixing DetailN/A 1:1
Glazing Bars - Cross Sections GB-7-002
REV: -
300109
300310
72122Fixing shoe
WM51024Backing seal
WM51024 orWM50090Backing seal
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Transom DetailN/A 1:1
Glazing Bars - Cross Sections GB-7-003
REV: -
Head Detail
Bottom Detail
300109
300107
300107
300310
Drainage hole
3/16"csk machine screw
Inseal tape #3109 x6.0mm thick (by sellotape)between glass and cap
Head flashing fixed to cap
Packing to suite
300107 Sill Optional
Rafter notch for 300108 onto 300107
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Transom DetailN/A 1:2
Glazing Bars - Cross Sections GB-7-004
REV: -
Slope
Cap to glazing bar rafter
Silicone sealantbetween glazing
Purlin backing sealcut 20mm (cap Only)
Continuous backing seal to rafter
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Purlin JunctionN/A 1:1
Glazing Bars - Cross Sections GB-7-005
REV: -
300107
Transom notch for300109 onto 300107
Jamb flashingfixed to cap
Glazing bar cap40 x 40 x 3mm(FAL 609130)
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Jamb DetailN/A 1:1 Double Glazed
Glazing Bars - Cross Sections GB-7-006
REV: -
300310
300109
300108
WM51024
WM51024
Fasten cap with 3/16"csk machine screw
Continuous siliconeseal between glazing
Flat as purlin stops
72122
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Purlin DetailN/A 1:1
Glazing Bars - Cross Sections GB-7-007
REV: -
300310 Glazing cap
300109
300108
Flat fixed to rafterchannel in shortlengths as a stopfor the purlin
72122Glazing bar fixing shoe 75mm long
50878WM51024
50878WM51024
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Main Rafter DetailN/A 1:1
Glazing Bars - Cross Sections GB-7-008
REV: -
302914
302915 BR515
HEAD
SILL
Wedge to suit
25
Mill off TEE & Fold up in Vice
Drill to suit Fixing screws
50845
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Fixing Shoe DetailN/A 1:1 Iluminex Glazing Bars
Glazing Bars - Cross Sections GB-7-009
REV: -
302448
302449
50810
50811
Box section to suit
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Glazing Bar DetailN/A 1:1 Universal Glazing Bars
Glazing Bars - Cross Sections GB-7-010
REV: -
308703
Jamb flashing fixed to cap
OversealSealant
Timber or plasticpacker
Fixing toengineer specs.
229060
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Jamb DetailN/A 1:1 Thermal Glazing Bars
Glazing Bars - Cross Sections GB-7-011
REV: -
Jamb flashingfixed to cap
225064
1.6mm Flashing
Flashing cup, 1.6mmaluminium strip. 50mmwide, rivited to extrusion@500mm Ctr max.
308702
Timber or plasticpacker
Fixing toengineer specs.
Jamb flashing fixed to capSealant
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Jamb DetailN/A 1:1 Thermal Glazing Bars
Glazing Bars - Cross Sections GB-7-012
REV: -
308703
Bracket mountedto 308703 first
Bracketfabricated to suit
229060
Fixings toengineer specs
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Purlin DetailN/A 1:1 Thermal Glazing Bars
Glazing Bars - Cross Sections GB-7-013
REV: -
308702
225064
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Purlin DetailN/A 1:1 Thermal Glazing Bars
Glazing Bars - Cross Sections GB-7-014
REV: -
Head Detail
Bottom Detail
308703225064
End Caps to be 3mm thick AluminiumFabricators to make
Packer
Jamb flashingfixed to cap
over seal
Packer - Timber or plastic
Fixing toengineersspec
Packer -Timberor plastic
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Glazing Bar DetailN/A 1:1 Thermal Glazing Bars
Glazing Bars - Cross Sections GB-7-015
REV: -
Dwg Dwg Revision RevNo Description Description DateGB-8-IN01 Index Page - - - - -GB-8-001 Purlin Detail - - - - -GB-8-002 Universal Glazing Bar Detail - - - - -GB-8-003 Glazing Bar Detail - - - - -GB-8-004 Exploded Views - - - - -
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Exploded ViewsN/A N.T.S
Glazing Bars - Exploded Views GB-8-IN01
REV: -
300310 cap
300107 Outer frame
300108 rafter
Glass stop
300109 Purlin milled around rafter
3/16" BSWcsk screw
Purlin stop
3/16" csk Slot head machine screws @250mm ctrs(for screw length see sheet GB-5-001)
Note:• Transom milling detail different @ the outer frame to that of a standard transom.• See Section 9 Machining for milling/notching details.• See Section 5 Hardware for screw lengths.
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Purlin DetailN/A N.T.S Commercial Glazing Bars
Glazing Bars - Exploded Views GB-8-001
REV: -
Box sectionto suit span
Glass sheetspanning betweenbox sections maxctrs 600mm
302449 cap
8g ss fixingsat 400 ctrs
302448base
WM050Glazing base seal
WM049Glazing base seal
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Universal Glazing Bar DetailN/A N.T.S Universal Glazing Bars
Glazing Bars - Exploded Views GB-8-002
REV: -
Fixing shoes
Glass stop
Head flashing
Slot glazing bar toaccept head flashing
Splice cut glazing barif required
Wedge gaskets
Glass
302914/ 303171/ 302458Glazing bars
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Glazing Bar DetailN/A N.T.S
Glazing Bars - Exploded Views GB-8-003
REV: -
Mitre Cut
End Caps to be 3mmthick AluminiumFabricators to make
Glass
308702
308703
78607
8g Pan x 12mm
8g Panx 50mm
308703
308703
78607
See section formachining and drainage
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Exploded ViewsN/A N.T.S
Glazing Bars - Exploded Views GB-8-004
REV: -
Dwg Dwg Revision RevNo Description Description DateGB-9-IN01 Index Page - - - - -GB-9-001 Cutting Formulae - - - - -GB-9-002 Purlin Machining - - - - -GB-9-003 Purlin Machining - - - - -GB-9-004 Purlin Machining - - - - -GB-9-005 Roof Bar Machining - - - - -GB-9-006 Glazing Bar Machining - - - - -GB-9-007 Glazing Bar Machining - - - - -GB-9-008 Purlin Machining - - - - -GB-9-009 Glazing Bar Machining - - - - -GB-9-010 Glazing Bar Machining - - - - -
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
MachiningN/A N.T.S
Glazing Bars - Machining GB-9-IN01
REV: -
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Purlin MachiningN/A N.T.S
Glazing Bars - Machining GB-9-001
REV: -
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Purlin MachiningN/A N.T.S
Glazing Bars - Machining GB-9-002
REV: -
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Purlin MachiningN/A N.T.S
Glazing Bars - Machining GB-9-003
REV: -
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Purlin MachiningN/A N.T.S
Glazing Bars - Machining GB-9-004
REV: -
300107Outer frame
300310Cap
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Roof Bar MachiningN/A N.T.S Commercial Glazing Bars
Glazing Bars - Machining GB-9-005
REV: -
302914Glazing bar
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Glazing Bar MachiningN/A N.T.S
Glazing Bars - Machining GB-9-006
REV: -
302449Cap
302448Glazing bar
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Glazing Bar MachiningN/A N.T.S Universal Glazing Bars
Glazing Bars - Machining GB-9-007
REV: -
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
308702 MachiningN/A N.T.S Thermal Head Notch
Glazing Bars - Machining GB-9-008
REV: -
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Glazing Bar MachiningN/A N.T.S
Glazing Bars - Machining GB-9-009
REV: -
308703 Purlin
308703 Head
308703 Head
308703 Purlin
10Ø Drainage hole
Scale:Updated:
This Drawing is Protected by Copyright © Altus NZ Ltd.
Glazing Bar MachiningN/A N.T.S
Glazing Bars - Machining GB-9-009
REV: -