Baker Oil Tools PRODUCT REPORTPRODUCT REPORT
2001 Baker Hughes Incorporated. All rights reserved.
PR/SCS/12-01
Magnacide 575 Product
DESCRIPTION/APPLICATION:Magnacide 575 is a biocide product for
use in Baker Oil Tools' fracturing fluids. The product is typically
used as a quick kill biocide when loading fracturing fluid mix
water onto frac boats tanks and plumbing. A significant advantage
of Magnacide 575 is its ability to rapidly degrade through
hydrolysis, photolysis, oxidation, and biometabolism. In most cases
the biocide is degraded into nontoxic by-products within 24 hours.
This makes the product much less toxic to use than most biocides
used in the oilfield.
FEATURES/BENEFITS: Broad spectrum biocide Has quick kill
characteristic Rapidly degrades into nontoxic byproducts Has
tolerance to salinity
APPLICATION AND DOSAGE:For fracture stimulation treatments, the
recommended dosage is 0.1 to 0.3 gallons per 1000 gallons(0.1 to
0.3 liters per cu. meter). Magnacide is compatible with all of
Baker Oil Tools fracturing additives. Compatibility tests should be
performed.
AVAILABILITY:Magnacide 575 is available from Broussard, LA, and
Houston, TX.
SHIPPING AND HANDLING:Maganacide 575 should be handled with
caution. Refer to Material Safety Data Sheets for overall han-dling
information, first aid procedures, and required protective
equipment.
SPECIFICATIONS: Form Clear colorless liquid
Flash Point NonflammableFreeze Point -4F (-20C)
Specific Gravity 1.38
December 2001 SAND CONTROL SYSTEMSFluid Pumping Services
Main MenuProduct Catalog MenuProduct Report MenuFluid Pumping
Services Product Reports
Tech Facts
