Upload
swami-reddy
View
221
Download
0
Embed Size (px)
Citation preview
7/31/2019 fph2_e
1/2
Output- up to 1800 pieces/min
Product dimensions- Length: 15 45 mm
- Width:12 30
mm- Height: 5 18 mm- Diameter of ball shaped
products: 15 30 mm
Drive- 1,5 kW
Connected load- 5 kVA
Utilities- Compressed air consumption:
6 bar; 2 Nm3/h
Wrapping material- heat sealable foil- cold sealable foil
Material dimensions- Reel diameter: max. 400 mm- Reel width: max. 120 mm
Measurements- FPH2 basic machine:
Length: 2800 mmWidth: 1020 mm
Height:1860
mm- Product feeding unit:Length: 1000 mmWidth: 700 mmHeight: 1500 mm
Weight- approx. 1300 kg
Horizontal high speedwrapping machine forhard candies and otherpreformed products infin seal (pillow pack)
FPH2
The smarter solution in packaging.THEEGARTEN PACTEC
7/31/2019 fph2_e
2/2
Horizontal high speed wrap-
ping machine for hard candiesand other preformed products
in fin seal (pillow pack). Thestandard machine is equip-ped with a sorting station to
eliminate sugar dust and chips,a wrapping material feedingsystem with 2 reel holders
and automatic splicer and aproduct discharge chute withseparation gate to eliminate
spliced products. An effi-cient feeding is achieved bymeans of a feeding plate.
Three pairs of sealing rollersfor the longitudinal seam,as well as a cross sealing unit
guarantee absolutely tightpacks.
Special features- PLC control- Servo control for infinitely variable adjustment of the wrapping material length- Quick and simple size change by a few adjustments only- High filling efficiency of the feeding plate (plate diameter 900 mm)- Tooth conveyor transmission drives- All electrical and electronic components are located in a separate switch cabinet- Multi-packs (up to 5 preferably round or ball-shaped products) are possible- All guards and the control panel are in stainless steel- Automatic splicer- Reject unit for unwrapped products at the infeed lug chain to optimize the machine
function during start up, stop and splicing mode and minimize the number of nonproperly registered and empty pouches
- Incomplete multi-packs and mal-positioned products are ejected
Optional extras- Photo-electric print registration- Optional high precision forming shoulder for crease proof pouches- Safety conveyor for correct positioning of the candies- Candy feeding system with grader to separate sugar dust and chips- Discharge conveyor with ejection device for spliced packages- Counting unit upon request- Discharge conveyor with ejection device for spliced packages and suction device for
empty pouches- Code dating device- Detection system for foil manufacturer splices
Operation- Depending on the local conditions, one, two or more machines can be operated
by one person- High operating comfort due to touch screen with pictographs and fault indication- Simple maintenance and cleaning; sufficient floor clearance- System of protection: IP 54
FPH2
We reserve the right to amend the construction without prior notice The smarter solution in packaging.THEEGARTEN PACTEC
THEEGARTEN-PACTEC GmbH & Co. KG
Breitscheidstrasse 46D 01237 DresdenTel.:0049/351-2573-0
Fax: 0049/351-25 [email protected]