2

Founded in 1999 with over 18 years of experience as an optical distribution company, Hortron Enterprise, Inc. continues to be a reliable source of high quality optical products. We are committed to provide quality products in the optical industry at reasonable prices. We have carefully developed an exclusive line of products that meets

our clients' highest standards. HOLENSÆ, our lens brand, is made with the latest production technology with premium raw materials from across the world. In optical equipment we have created the HORTRON brand. Just like our lenses, all of our equipment is made with the best materials from top factories. Our customers rely on the quality of our products and the extraordinary customer service, with same day response. We have the most complete inventory for prompt international shipping. Hortron is always looking for ways to improve our service and expand our line of products to better serve our customers.

Optical Equipment Page 3: Auto Refractor/Keratometer Auto Refractor Vision Chart Page 4: Auto Chart Projector Phoropter Digital PD Meter Recharge. Ophthalmo/Retino Page 5: Simple Trial Frame Adjustable Trial Frame Trial Lens Sets Page 6: Keratometer Applanation Tonometer Slit Lamp Portable Slit Lamp Page 7: UV Tester Up/Down Table Stand & Chair Prism Test Cross Cyl. Test Maddox Test Confirmation Test Confirmation PD Test, Flipper, Trial Clip Page 8: Retinoscopy Rack Silhouette Plier Set Tool Set Screw Driver Set Screw Extractor Screw Nut Stand Lens Clock Page 9: Digital Lens Clock Digital Thickness Gauge Manual Lensmeter Digital Lensmeter

Page 10: Auto Lens Edger Layout Blocker Pattern Maker Pattern Opener 3-Hole Driller Page 11: Lens Cutter Hand Edger Hand Edger-Grinder Hand Edger-High Speed Auto Lens Groover Auto Lens Polisher Page 12: Digital Drilling Machine Driller Driller with notch Digital Frame Heater Ultrasonic Cleaner De-Blocking Plier Accessories Page 13: Screws Hex Nuts Silicone Nose Pads Plastic Washers Bushings Blocks Part Wheels Frame Display Page 14: Drill Bits Machine Belts Other Parts Bulbs Wheels Page 15: Leatherette Case Microfibers Hand Occluder Surfacing Products Coatings & Solutions Finishing Products

Certified Rx Safety Frames Page 16: 3M Brand Safety Frames UVEX Brand Safety Frames Page 17: UVEX Brand Safety Frames General Information Ophthalmic Lenses Page 18: CR39 N:1.56 Polycarbonate N:1.60 N:1.67 N:1.74 Photochromic N:1.56 Photochromic Polycarbonate Sun Lens Page 19: Glass Mirror Coated SunSensorsÆ Transition VIIÆ Transition XTRActiveÆ Transition VantageÆ DrivewearÆ TriologyÆ

3

AUTO REFRACTOR/KERATOMETER The Auto Refractor/Keratometer projects a standard infrared image to the retina. By means of analyzing the image on the retina, it can measure hyperopia, myopia, astigmatism, axis and cornea curvature. This instrument can also measure pupil distance, axis, farsightedness, nearsightedness and more. The Auto Refractor/Keratometer uses the most advanced technology to provide accurate measurements. This instrument has a 7îTFT LCD touch screen to make it convenient and at the same time easy to use. Refractometry: •Vertex Distance: 0.00, 12.0 and 13.75mm •Spherical: -20~+20D (VD=12) 0.125D step •Cylinder: -8~+8D (0.125 step) •Axis: 0~180 (1 unit) •Pupil Distance: 45~88 (1 mm step) •Min. Pupil Size: ÿ2.0 mm Keratometry: •Radius of Curvature: 5.0~10.0mm (increments: 0.01mm) •Corneal Refractometry: 33.75~67.5D (0.12 or 0.25D steps) •Corneal Astigmatism: 0.00~-8.00D (0.12 or 0.25D steps) •Axis: 1~180 (increments: 1) •Corneal Diameter: 2.0~14.0mm (increments: 0.1mm) •Memory Data: 10 measure value for each right and left eye. Other: •Chart: Follow-up colorful fogging chart system •Display: 7î TFT LCD Touch Screen •Printer: Thermal printer •Power supply: AC 100-240V, 50/60 Hz Model: HR-20.6500

7î TFT LCD Touch Screen

Back View

Also Available: Auto Refractor

VISION CHART The Vision Chart displays graphics on a 17inch LCD screen. It has a USB port and SD Card reader to upload additional tests as well as videos. It includes 16 preloaded test which are necessary for an adequate eye exam. The instrument includes wall mount, remote control, red-green glasses, Optotype cards and more. Specifications: •Screen: 17î LCD XGA Panel •Distance: 2m~7m •Low Vision Chart: 0.6m~1.5m •Mask Type: Change of background, single, horizontal, vertical, red/green mask •Test Function: Schober, Worth, Cross Grid, Coincidence, ETDRS, Stereo, Astigmatic, Traffic, Ishihara, Red Green Panel, and others •Optotype: E, C, Alphabet, Numbers, Children, Allen Pictures (normal & V type) Model: HR-20.901

Side View

4

AUTO CHART PROJECTOR The Auto Chart Projector is a test chart presenting instrument which can achieve refracting distance from 2.0m to 7.0m The instrument is controlled by a wireless remote control. It displays neat, clear and sharp images. Specifications: •Projection Distance: 2.0m to 7.0m (6 to 23ft) •Projection Scale: 30X (at 5m) •Lamp: LED 3W White LED •Program: 2 Kinds (50 charts or 38 masks) •Chart: 50 different types •Tilting Angle: ±10 •Speed of Chart Conversion: 0.3 seconds or less Model: HR-20.NH-500LED

PHOROPTER The Phoropter provides highly accurate readings over a wide range. Fast, accurate readings on Binocular Visual Balance. Offers astigmatism tests. Specifications: •Sphere Power Range: +16.75 to ñ19.00D, with a min. reading 0.25D or 0.12D •Cylinder Power Range: 0 to ñ6.00 with min. reading 0.25D to 0.12D •Astigmatic Axis Scale: 0 to 180 in 5 steps •Cross Cylinder: ±0.25, reversal type •Rotary Prism: 0 to ñ20ΔD, in 1ΔD step •Inter-Pupillary Adjustment: 48-80mm in 1mm step •Effective Field of View: 19mm •Colors Available: Black or White Model: HR-20.5

DIGITAL PD METER •Compact, light weight (600g) and easy to read display •Turns off automatically after 1 min of inactivity •Data show range (two eyes): PD 44-83mm •Target distance: 30cm, 35cm, 40cm, 50cm, 65cm, 1m, 2m, ∞. •Monocular and Binocular interpupillary distances are shown on screen. Model: HR-20.1

RECHARGEABLE OPHTHALMO & RETINOSCOPE COMBO This product comes with an interchangeable heads to switch from a Streak Retinoscope to an Ophthalmoscope. The case makes it portable and easy to carry. Rechargeable battery allows for a quick eye exam. Model: HR-20.24B-11D

DIGITAL PD METER •Digital raster display •Measuring range 45-82mm •Auto shutdown when layed flat •Light weight, compact and simple to use Model: HR-20.710

5

TRIAL LENS SET - 90 PIECES This Trial Lens Set has a total of 90 pieces. A leather carrying case is included with a standard removable tray and velvet interior. Power marks engraved on both sides of the metal ring. Lenses included are the following: ± Sph from 0.25 to 2.00 in steps of 0.25, from 2.50 to 5.00 in steps of 0.50 and from 6.00 to 10.00 in steps of 2.00. Negative Cylinder from 0.25 to 1.00 in steps of 0.25 and from 1.50 to 3.00 in steps of 0.50. Accessory lenses included.

ADJUSTABLE TRIAL FRAME •Fully adjustable temple length and nose rest •Wide range of PD adjustments from 48~80mm •Accommodate up to 8 piece 38mm trial lenses •Easily changeable cylinder axis •Net Weight: 70g Model: HR-20.4880N

ADJUSTABLE TRIAL FRAME •Fully adjustable temple length, PD and nose rest •Accommodate up to 8 piece 38mm trial lenses •Light weight (48 g) and compact Model: HR-20.5470

PREMIUM ADJUSTABLE TRIAL FRAME •PD scale: 50 ~ 80mm •Net Weight: 61g •Knobs fastened with screws •Back lens holders with round corners •Shape ear rests conveniently •Available for 5 piece trial lenses to be inserted at each side Model: HR-20.5080

SIMPLE TRIAL FRAME •Light weight and compact •PD scale sizes: 50, 52, 54, 56, 58, 60, 62, 64, 66 & 68 •Accommodate up to 8 piece 38mm trial lenses

TRIAL LENS SET - 232 PIECES This Trial Lens Set has a total of 232 pieces. Option of Leather or Aluminum carrying case. Comes with a standard removable tray and velvet interior. Plastic or metal rings available as well as one color or two color rings. Lenses included are the following: ± Sph 0.12, from 0.25 to 4.00 in steps of 0.25, from 4.50 to 7.00 in steps of 0.50, from 8.00 to 15.00 in steps of 1.00 and from 16.00 to 20.00 in steps of 2.00. ± Cylinders 0.12, from 0.25 to 4.00 in steps of 0.25, 4.50 to 6.00 in steps of 0.50. Prism and Accessory lenses included.

TRIAL LENS SET - 260 PIECES This Trial Lens Set has a total of 260 pieces. Option of Leather or Aluminum carrying case. Comes with a standard removable tray and velvet interior. Plastic or metal rings available as well as one color or two color rings option. Lenses included are the following: ± Sph from 0.25 to 6.00 in steps of 0.25, from 6.50 to 10.00 in steps of 0.50, from 11.00 to 14.00 in steps of 1.00 and from 16.00 to 20.00 in steps of 2.00. ± Cylinders from 0.25 to 4.00 in steps of 0.25 and from 4.50 to 6.00 in steps of 0.50. Prism and Accessory lenses included.

6

APPLANATION TONOMETER The product is designed on the principle basis of Goldman Tonometer. Three types are available: R and T are suitable for Haig Streit type slit lamp. While the Z type is suitable for Carl Zeiss type slit lamp. It is easy to use and is very accurate. The Applanation Tonometer measures intraocular pressure. Model: HR-20.30

KERATOMETER The Keratometer is used to measure the curvature and reflection of the anterior surface of the cornea. Specifications: •Size of Measuring Targets: 18 x 24mm •Distance between measuring targets and cornea: 175mm •Radius of curvature: 5.5~11mm •Refractive power: 30~60dpt •Refractive index based on the diopter calculation: 1.3375 •Scale protractor: - Field: 0 ~ 180 - Graduation: 5 Model: HR-20.38

SLIT LAMP The Slit Lamp is a Galilean-Type lamp. The Slit width and length are continuously variable from: 0 to 14mm and 1 to 14mm respectively. Specifications: •Total Magnification Ratio: 6x, 10x, 16x, 25x, 40x •Eyepieces: 12.5x •Diopter Adjustment: ±6.0D •Slit Angle: 0~180 •Slit Inclination: 4 step: 5, 10, 15, 20 •Filter: thermal safety, UV, red-free, cobalt blue •Aperture Diameters: 14, 10, 5, 3, 2, 1, 0.2 •Fixation: Green LED Model: HR-20.350 more models available.

PORTABLE SLIT LAMP The Portable Slit Lamp projects a beam of light to the patientsí eye, which forms an optical section of the living tissue in the eyes. Instrument can be used to observe diseases of the anterior structures and tissue damage in the eyes in medical institutions. Specifications: •Total magnification ratio: 5x •Length of slit: 5-11mm •Minimum width of slit: 0.2mm •Working distance: 12-32mm •Light source: LED (3V/1W - 2,000 hours of working life) Model: HR-20.SL2

Visit our websites: www.hortron.com and www.hortronoptical.com

7

Prism Set Confirmation Test

Cross Cylinder Test

Maddox Test

Flipper Confirmation PD Test Trial Clip Set

UP/DOWN TABLE This platform can be used for laying various desk-top apparatuses such as computers, medical-treatment appliances, etc. Relocating this table is simple and convenient. Lifts steadily and with a large amplitude (630mm-820mm). Model: HR-20.16

STAND AND CHAIR High quality and precise manufacturing allows for a stable, minimal noise and easy to operate function for any optical store. Specifications: •Table top rotates 90 •Table moves up and down •Table top slides left and right •Different chair styles available

Model: HR-20.130A

DELUXE STAND AND CHAIR The Deluxe Stand and Chair has an elegant appearance, makes minimal noise, and is easy to use and maintain. Made of high-grade stainless steel and aluminum alloy. Table panel is made of high-quality fire-proof plated material, which makes it temperature, wearing and erosion resistant. Specifications: •Table moves up and down •Includes Post, Chair, Phoropter arm, Projector arm and Lamp Model: HR-20.6000

UV TESTER The UV Tester is able to tell if lenses can block out UV rays easily. It also has a EMI coating detector. Temperature: 100C Model: HR-20.1208

8

RETINOSCOPY RACK SET The racks/frames of this set are made of acrylic, and the lenses are made of CR39 with a 19mm diameter. There are 32pc lenses in total including power 0.50, 1.00, 1.50, 2.00, 2.50, 3.00, 3.50, 4.00, 5.00, 6.00, 7.00, 8.00, 9.00, 10.00, 12.00 and 15.00 in plus and minus. The dimensions are 28*5cm, and it includes a carrying leather case. Model: HR-20.RS-2R32PLS

SILHOUETTE PLIERS SET The Silhouette Pliers Set is specially designed to push frame barbs out of the bushings while supporting lenses on a non-marring nylon surface. These high quality stainless steel pliers feature replaceable nylon jaws and steel pins for a long serving life. Set Includes: •Pressing Pliers (CT3030) - 1pc •Pressing Pliers (CT3031) - 1pc •Cutting Pliers (CT3032) - 1pc •Spare Jaw (CT3030A) - 1pc •Spare Jaw (CT3031A) - 1pc •Drilling Holder - 2pcs •Hole Pins - 1pc •Silhouette Pins 1.4*7.0 - 10pcs Model: HR-20.31106-2

TOOL SET Comes with a fabric case that makes it easy to carry. Set includes: 9 Pliers, 4 Screwdrivers, 1 Hook, 1 Pick and 1 File. Allows for easy adjustment to frames. Model: HR-31102-2

SCREWDRIVER SET Twelve piece set that comes in a stainless steel case. It is compact for easy carry. Set includes 2 handles, 4 Hex tips, 2 Flat tips and 4 Phillips tips. Model: HR-20.31302

SCREW NUT STAND The screw nut stand gives support when assembling frames. It is great for laboratories and optical stores. It is made of steel for long life and effective use. Includes accessory pins.

SCREW EXTRACTOR This instrument removes broken screws. It has a well supported stake. Includes two interchangeable points and two base posts. Instrument made of carbon steel for long life and effective use. Model: HR198

LENS CLOCK The Lens Clock measures Lens Curve and the ìdegreeî of astigmatism. Can display negative and positive values. Measure range is 0~±20D. It can measure CR39 and N:1.60 lens curvature. Model: HR-20.4402

9

Progressive Screen

Single Vision Screen

DIGITAL LENSMETER The Digital Lensmeter can be used to measure Single Vision, Bifocal, Trifocal, Progressive power lenses and contact lenses. It has a 7in. LCD (color) touch screen which can be tilted. It displays measured values of right and left-eye lenses, alignment, PD distance, Axis, Prism value and UV transmittance rate on the same screen. Icons are located on the screen for easy access. The Digital Lensmeter has a thermal printer which prints all measurements along with the names of the company and the customer. Specifications: •Sphere: 0~±25D (0.01, 0.12 or 0.25 steps) •Cylinder: 0~±9.99D (0.01, 0.12 or 0.25 steps) •Axis: 0~180 (1 step) •Addition: 0~±9.99D (0.01, 0.12 or 0.25 steps) •Prism: 0~15 (0.01, 0.12 or 0.25Δ) •Pupil Distance: 45~90mm (0.25mm steps) •Cylinder: +, +/-, - •Lens Diameter: ÿ20~108mm •ABBE: 30, 40, 50 and 60 •Tiltable 7in. LCD (color) Touch Screen Model: HR-20.903

MANUAL LENSMETER Lensmeter determines the optical parameters such as apex diopter, cylindrical astigmatic diopter, cylindrical astigmatic axial angle and the prismatic power. Specifications: •Sphere: ±5D with steps of 0.12D and above of +5D with steps of +0.25D •Cylindrical astigmatic axial angle: 0~180 •Prism axial angle measuring range: 0~360 •Adjustable tilt angle: 0~90 •Scale Value: 1Δ •External Reading •Power: 110V/3W pr 220V/3W •Weight: 4.2 kg •Dimension: 410 x 160 x 195mm Model: HR-CCQVB (formerly: HR-20.MX-1)

Optional Prism

DIGITAL LENS CLOCK This instrument measures Lens Curve for refractive index lenses: 1.49, 1.53, 1.56, 1.59, 1.61, 1.67, 1.71 and 1.74. It is completely digital and includes a foam lined, hard plastic protective case. Can be used to measure the ìdegreeî of astigmatism. Can display negative and positive values. Measure range is 0~±20D. Model: HR-20.4402D

DIGITAL THICKNESS GAUGE The Digital Thickness Gauge measures the thickness of any lens. This instrument is completely digital and easy to use. It can read the thickness in mm or in. It has a 45mm throat and it includes a foam lined, hard plastic protective case.

10

AUTO LENS EDGER The Auto Lens Edger provides great support for busy businesses. It quickly processes lens. It does 60 to 80 jobs a day, an estimate of 10 jobs per hour. Works on Polycarbonate, CR39 and Glass lenses. The set includes an Auto Lens Edger, Layout Blocker, Pattern Opener, Water Pump, Closet, and accessories. Specifications: •Digital display •Auto-Clip System •Automatic Free Float Beveling •Automatic Emendation Procedure •Technical parameter: min 22, max 100mm •Dimension: 530(L) x 500(W) x 400(H) mm •Weight: 50 kg (110 lbs) Model: HR-20.400

LAYOUT BLOCKER •Compact design and easy to use •No vision difference on the display screen, no deformation • Accurate lens layout obtained •Compensating the accuracy of the lens and suction cup position. •Bifocal lens can be positioned quickly and accurately. The small lens can also be put in clear projectile. ïPower: 110V 60 Hz / 220V 50 Hz Model: HR-20.8

PATTERN OPENER This model provides you with the ability to create patterns from a demo lens. Extremely simple to use and maintain. It accurately cuts patterns quickly, and leaves a smooth and attractive finish. •Dimension: 34 x 14 x 15 cm (L x W x H) •Weight: 5 kg •Power: 110V/60Hz, 220/50Hz, AC 150W Model: HR-20.400A

PATTERN MAKER This Pattern Maker is used on frames. This instrument traces the frame to create a pattern. It is suitable for frames of most shapes and sizes. Blade will cut around 400 pattern blanks before it needs to be replaced. It is fast, accurate, and easy to adjust. •Dimension: 305 x 224 x 170mm (H x W x D) •Power: 110V/60Hz, 220/50Hz, AC 150W Model: HR-20.5101

3-HOLE LENS DRILLER This model is handy, compact, light weight, and easy to use. It provides more than sufficient power with minimal noise. Ideal for perforating three (3) holes in demo lenses allowing it to be used as a pattern. •Includes steel sheets: oval and round (big, medium and small size) •Drill bits: 2 small and 1 big drill bits. •Power: 110V or 220V Model: HR-20.918AT

Wheels & parts avail.

Belts & drill bits avail.

Parts avail.

Belt & blade avail.

Parts & belts avail.

11

HAND EDGER - GRINDER This Hand Edger is easy to install, use, and maintain. This instrument has a high efficiency diamond grinding wheel. It includes the upper can, lower can, oilstone stick, leather band and length of hose. Perfect for quick fixes. •Power: 110V or 220V Model: HR-20.35WV

HAND EDGER - GRINDER It is easy to install, use, and maintain. Three-in-one combinative diamond grinding wheel, 1 rough grinding, 1 fine grinding and 1 V-fine grinding. Equipped with illuminant device to ensure correct operation. This machine works with CR39 and Glass. •Dimension: 395 x 245 x 295mm (L x W x H) •Weight: 7.8 kg •Power: 110V/60Hz, 220/50Hz, AC 150W Model: HR-316

HAND EDGER - HIGH SPEED This edger is easy to install, use, and maintain. It includes diamond grinding wheel. It has smooth and fine grinding options as well as a v-fine grinding option. •Power: 110V/60Hz, 220/50Hz, AC 150W Model: HR-20.100

AUTO LENS GROOVER The Auto Lens Groover provides speed and precision. It performs the job in approximately 20 sec/rev. The rotating speed of the cutter is 5500rpm. Grooving depth is 0~0.7mm. Grooving width is 0.55~0.6mm. Lens edge thickness: 1.2-11.0mm. Diameter of lens: 22 ~ 60mm •Weight: 2.7 kg Model: HR-20.8121

AUTO LENS POLISHER The Auto Lens Polisher is adequate for CR-39, Plastic Hi-Index, Poly and Glass Lenses. It has a clear hood to inspect lens polishing, reduce noise and help collect dust. Provides great power with minimal noise. Has timer 0~5 minutes. Includes buffing wheel and polishing compound •Power: 110V or 220V •Weight: 4.8 kg Model: HR-20.900

LENS CUTTER This machine can cut CR39, N:1.56 and N:1.60 lenses. Place the lens on the left side, the pattern on the right side and it is ready to cut. Machine has a quick cutting speed. •Power: 110V or 220V Model: HR-20.40

Parts, belts and buffing wheel avail.

Wheel & parts avail.

Wheel & parts avail.

Belt & wheel avail.

Belt & wheel avail.

Blade & parts avail.

12

DRILLER This model provides great power with minimal noise. Adequate for Glass, Plastic and Poly lenses. System penetrates both faces of the lens. Possible diameter of drilling is ÿ0.8~ÿ2.8mm. Includes a suction lens holder. •Dimension: 140W x 185D x 275H mm •Weight: 4.1 kg Model: HR-20.3

DRILLER WITH NOTCH The Driller with Notch is adequate for Glass, Plastic and Poly lenses. It penetrates both faces of lens. Accurately reams the drilled hole with range of 0.8 to 2.8mm. Notch available in two sizes 0.8mm and 1.0mm. Depth of notch can be adjusted freely. Has protective cover for safety. Lens holder fixture included. •Weight: 4.8 kg Model: HR-20.988

DIGITAL DRILLING MACHINE This Drilling Machine is completely Digital. This machine is accurate with a process deviation of less than 0.075mm in X & Y axis. The screen shows the drill position and coordinate data, and gives guidance to the operation. The hole position memory function allows to process the set hole position continuously. This model has mirroring mode. •Drilling Speed: 0~5000rpm •LCD Screen •Drill-Bits: 1.0, 1.2, 1.42, 1.5, 1.6, 1.7, 2.0 and set hole •X-Axis Moving Range: 155mm •Y-Axis Moving Range: 38mm continuously. Model: HR-20.3G

DIGITAL FRAME HEATER This Digital Frame Heater has a digital control panel that displays real time work temperature inside the housing unit. Temperature control system up to 150. Wind speed is 1.8m/s. No messy beads, and reduces danger of burning or drying out the frame. Ideal for regular and sensitive frames. •Weight: 1.26 kg. Model: HR-20.W481

ULTRASONIC CLEANER The Ultrasonic Cleaner can clean anything from optical glasses, accessories, and small tools to jewelry, stationery, metal articles, and even dining appliances. It has a highly effective ultrasonic vibration system. Also has 35 watts of true ultrasonic power. Machine has a 3 minute auto shut off. •Dimension: 20 x 12.5 x14 cm (tank size: 600ml) •Weight: 780 g Model: HR-20.2800

DE-BLOCK PLIERS These pliers are specially designed to remove blocks from lenses after edging. It is made of steel for long lasting and effective use. More pliers available.

Drill bits avail.

Drill bits avail.

Drill bits avail.

Accessories avail..

13

DE-BLOCK PLIERS The pliers is specially designed to remove the block from lens after edging. It is made of steel for long life and effective use. More Pliers Available.

GENERAL SCREW Head Type Thread x Length x Head Color Code Qty

1.6 x 4.2 x 1.2 Silver S161242 100pcs

2.0 x 3.9 x 1.4 Silver S201439 100pcs

NOSE PAD SCREW Head Type Thread x Length x Head Color Code Qty

1.8 x 3.6 x 1.0 Silver S181036 100pcs

1.8 x 3.8 x 1.0 Silver S181038 100pcs

HINGE SCREW Head Type Thread x Length x Head Color Code Qty

2.0 x 2.8 x 1.4 Silver S201428 100pcs

2.0 x 3.2 x 1.4 Silver S201432 100pcs

2.0 x 3.7 x 1.4 Silver S201437 100pcs

2.0 x 4.1 x 1.4 Silver S201441 100pcs

HEX NUTS Head Type Thread x Length x Head Color Code Qty

1.5 x 2.5 Silver N122512 100pcs

1.4 x 2.5 Silver N122514 100pcs

1.4 x 2.5 Gold N122512G 100pcs

SILICONE - OVAL NOSE PADS Shape Type Size Mount Color Code Qty

13 Push-In Clear NC37P13 100prs

15 Push-In Clear NC37P15 100prs

15 Screw-In Clear NC29S15 100prs

SILICONE - ROUND NOSE PADS Shape Type Size Mount Color Code Qty

9 Screw-In Clear NC31S09 100prs

SILICONE - TEARDROP NOSE PADS Shape Type Size Mount Color Code Qty

13 Screw-In Clear NC30S13 100prs

PLASTIC WASHERS Shape Inner Dia. x Outer Dia. x Length Color Code Qty

1.4 x 3.0 x 0.25 Clear W143005 100prs

BUSHINGS Shape Length x Diameter x Head Color Code Qty

7.0 x 1.4 OD/0.8 ID x 1.4 Clear DBL14 100pcs

7.0 x 1.5 OD/0.8 ID x 1.4 Clear DBL15 100pcs

7.0 x 1.6 OD/0.8 ID x 1.4 Clear DBL16 100pcs

7.5 x 2.2 x 1.35 Clear SGL22 100pcs

PLASTIC BLOCKS Image Description Material Qty

Block Line, Full Eye Plastic 25pcs

Dbl Line (Groove), Half Eye Plastic 25pcs

Block Line, Full Eye Plastic 25pcs

RUBBER / METAL BLOCKS Image Description Material Qty

Block Line, Full Eye Rubber/Metal 25pcs

Block Line, Half Eye Rubber/Metal 25pcs

Dbl Line (Groove), Full Eye Rubber/Metal 25pcs

PART WHEELS 10 compartments to hold screws, hinges, nose pads & small parts. Spin to open. Size: 60 mm 90 mm 110 mm

FRAME DISPLAY Great space-saver for Optical Stores. Easy to install to the wall. Great Chrome finish. Displays 12 pieces for easy access with or without lock. Other styles displays with different sizes, counter top & floor displays are also available.

Visit our websites: www.hortron.com and www.hortronoptical.com

14

DRILL BITS Image Description Diameter Size Qty

Digital Driller 1.0, 1.2, 1.3, 1.35, 1.4, 1.5, 10pcs 1.6, 1.7, 1.8, 1.9, 2.0, 2.2

Driller HR-20.3 One Size 3pcs

Driller w/Notch HR-20.988 One Size 3pcs

Pattern Maker HR-20.9PM One Size 1pc

3 Hole Driller HR-20.918AT One Size 3pcs

Pattern Opener HR-20.400A One Size 1pc

Lens Cutter HR-20.40 One Size 1pc

MACHINE BELTS Image Description Size Qty

Pattern Opener HR-20.400A One Size 1pc

3-Hole Driller HR-918AT One Size 1pc

Hand Edger HR-20.35WV One Size 1pc

Hand Edger HR-20.316 One Size 1pc

Auto Groover HR-20.8121 One Size 2pcs

Auto Polisher HR-20.900 One Size 1pc

OTHER PARTS Image Description Qty

Accessories for Screw Nut Stand 5pcs

Pins for Screw Extractor 4pcs

Metal Templates for 3-Hole Driller 5pcs

Layout Blocker Adaptors 2pcs

Acrylic Patterns 100pcs

Image Description Qty

Lens Hole Gauge 1pc

Replacement condenser cone for Frame Warmer 1pc

Replacement warmer cup for Frame Warmer 1pc

Accessories/Parts for Lensmeter 1pc

Dressing Sticks - Pale Green - Various Grits 1pc

Chuck Rubber Part 2pcs

Waterproof Sponge for Hand Edger 1pc

Replacement Sponge 1pc

Ink Replacement Sponge for Lensmeter 1pc

BULBS Image Description Qty

Halogen Display/Optic Lamp 20W - 6V - G4 1pc

Bulb for Layout Blocker HR-20.8 1pc

Bulb for Hand Edger-Grinder HR-20.316 1pc

Bulb for Manual Lensmeter HR-20.MX-1 1pc

Bulb for Ophthalmoscope (Hortron or W.A.) 1pc

Bulb for Retinoscope (Hortron or W.A.) 1pc

WHEELS Image Description Qty

Auto Lens Groover HR-20.8121 1pc

Hand Edger HR-20.35WV 1pc

Hand Edger High Speed HR-20.100 1pc

Hand Edger - Grinder HR-20.316 3pcs

Auto Lens Edger HR-20.400 1set

Auto Lens Polisher HR-20.900 (Buff Wheel) 1pc

We also offer wheels for other machines

15

LEATHERETTE CASE Image Description Qty

Classic Frame Case Increments of 10 Color Avail: Black, Brown, Blue & Burgundy.

Sunglasses Case Increments of 12 Color Avail: Black, Brown, Zebra & Cheetah

Classic Microfiber 6î x 6î 100pcs Color Avail: Grey, Blue, Black, Olive Green, & Burgundy.

Premium Microfiber 6î x 6î 100pcs Color Avail: Grey, Yellow, Black, Lime Green, & Orange

Lab Microfiber 15î x 15î 50pcs

Contact Lens Case - Two Color 50pcs

Lens Cleaning Wipes 100pcs

Plastic PD Ruler 100pcs

Hand Occluder 1pc

Interliner & Cords 8pcs

SURFACING PRODUCTS Protective Tapes/Blocking

Digital Surfacing

Diamond Cutters

Fining Pads

Polishing Pads

Polish / Slurry

Chemicals

Tools / Accessories

Synchrony System

COATINGS AND TREATMENTS

NGL Cleaning Solutions

AR Chemicals

Boats

Crucible Liners

Crystals

EB Gun Assembly Spare Parts

Filaments

Insulators

Ion Gun Assembly Spare Parts

Super-Hydrophobic Pills

Tints, UV and moreÖ

FINISHING PRODUCTS

Edging Pads

Edging Blocks

Edging Tools

Tools / Accessories

16

ZT100 Color:Black, Blue/Gray, Gray/Red

Size: 53 15 / 57 15 / 62 15

ZT200 Color:Black/Lime, Gray/Yellow

Blue/Gray Size: 54 20

EAGLE RX Color: Smoke

Size: 53 13 / 56 11 / 59 13

F6000 Color: Gray Fade

Size: 50 13 / 53 15 / 55 15

ZT25 Color: Matte Black

Size: B:6 - 56 19 / B:8 - 61 19

ZT35 Color: Matte Grey, Shiny Black

Size: 57 20 125

V1000 Color: Jet / Wine Fade

Size: 52 18

A2000 Color: Pink / Smoke Size: 54 17 / 58 17

ZT45 Color: Black/Black, White/Tan Size: B:6 - 54 13 / B:8 - 63 13

SW06 Color: Brown/Yellow Black/Orange

Size: 57 16 125

SW07 Color: Brown, Blue, Gunmetal

Size: 60 13

SW09 Color: Black, Blue, Red

Size: B:6 - 56 21 / B:8 - 59 21

For other styles, sizes, and accessories, please call for more information or visit

www.hortron.com/safetyframes.html

SW10 Color: Black, Clear, White, Tortoise

Size: B:6 - 53 22 / B:8 - 56 22

SP83 Color: Brown, Gray

Size: 50 20 / 52 20 / 54 20

XC Lens Color: Clear, Gray, Mirror

One Size, Box of 10pcs, Carrier Sold Separate

17

70F Color: Gray / Black

Size: 48 20 / 50 22 / 50 24

RX3003 Color: Black, Blue

Size: One size w/ Duoflex Adj.

BC101 Color: Gold, Gray, Demi Amber

Size: 54 17 / 56 17 / 58 17

General Information 1. This Catalog is arranged so that you can find the item of your choice in a simple and efficient manner. 2. Model Numbers are necessary when ordering. In order to properly ship your order, please provide the

quantity and model number. 3. You may request a quote before placing an order. 4. All concealed shortages or damages on merchandise shipped directly from Hortron Enterprise, Inc., must

be reported within 24 hours of delivery to our customer service by phone (909) 988-7328 or by email hortron@yahoo.com, sales@hortron.com.

5. Once an order has been shipped through the shipping company of your choice; Hortron Enterprise, Inc. is not responsible for any damages or loses. We highly recommend insuring all merchandise.

6. If merchandise arrives damaged shipped directly from Hortron Enterprise, Inc., it is the consumerís responsibility to report to the carrierís delivery receipt ìreceived in damage conditionsî, and report damages immediately to Hortron Enterprise, Inc.

7. It is the consumerís responsibility to keep all packaging material during a pending insurance investigation. Hortron Enterprise, Inc. will not be responsible unless the above procedures are followed.

8. Any shipped items cannot be returned for credit unless they are factory defective. Credit will not be given if an item has been misused.

9. Hortron Enterprise, Inc. does not sell used merchandise; therefore, no item can be returned after it has been used.

10. Before returning any item, please notify Hortron Enterprise, Inc., for instructions. 11. Special and factory orders are final. 12. The illustrations and text in this catalog describe each item at the time of printing. Specifications may

differ because of conditions at the time of manufacture. We reserve the right to ship the closest item we believe will suit your needs.

13. State sales tax will be charged on each invoice where applicable. 14. It is the customerís responsibility to furnish Tax Exemption data. 15. When importing, it is the customersí responsibility to have all necessary documents and/or permits and

comply with customs authorities. 16. If you wish to use images or modify this catalog, please inform Hortron Enterprise, Inc. before making any

modifications or using any images. 17. All products in this catalog are copyright of Hortron Enterprise, Inc. You may not modify, transmit, reuse, or

use the contents of the catalog for public or commercial purposes, with the exception of written permission from Hortron Enterprise, Inc.

18. If you have any questions about any of our products, descriptions, information or have any comments, please feel free to contact us via Phone: (909)988-7328, Fax: (909)988-7158, Email: hortron@yahoo.com, sales@hortron.com.

Visit our websites: www.hortron.com and www.hortronoptical.com

18

CR39 HOLENS Single Vision F .70/65mm HOLENS Single Vision F. Super AR 70/65mm HOLENS Single Vision F. High Cyl 70/65mm HOLENS Single Vision Semi-Finish 70mm HOLENS Single Vision Semi-Finish 75mm HOLENS Single Vision S.F. Super AR 70mm *Exclusive HOLENS Flat Top Finish 70/28mm HOLENS Flat Top Semi-Finish 70/28mm HOLENS Flat Top S.F. Super AR 70/28mm *Exclusive Flat Top Multiseg (Executive) 70/45mm HOLENS Round Top Semi-Finish 70/28mm HOLENS Blended Invisible Finish 70/28mm HOLENS Blended Invisible S.F. 70/28mm Tri Focal Semi-Finish 7 x 28 Tri Focal Semi-Finish 8 x 35 HOLENS Asp. Progressive Reg. Cor. F. 75mm HOLENS Asp. Progressive Reg. Cor. SF 75mm HOLENS Asp. Progressive Reg. Cor. SF AR *Exclusive HOLENS Asp. Prog. Short Cor. F. Super AR HOLENS Asp. Progressive Short Cor. SF 75mm Progressive Image Semi-Finish 80mm HOLENS Asp. Lenticular Single Vision S.F. 68/40mm *Exclusive HOLENS Asp. Lenticular Round Top S.F. 68/40/24mm*Exclusive N:1.56 Single Vision Finish HC & AR 72/65mm Single Vision F. HC & AR (High Cyl.) HOLENS Single Vision Semi-Finish HC 70mm Flat Top Semi-Finish 70/28mm Progressive Reg. & Short Cor. Semi-Finish Polycarbonate HOLENS Single Vision Finish HC 73/65mm HOLENS Single Vision Finish Super AR 73/65mm RESOLUTION Aspheric Single Vision Finish HC, Tintable RESOLUTION Aspheric Single Vision Finish AR HOLENS Single Vision Finish HC High Cyl. Tintable 70mm HOLENS Single Vision Finish AR High Cyl. 70mm HOLENS Single Vision Semi-Finish HC 75mm HOLENS Single Vision S.F. Super AR 75mm *Exclusive Flat Top Finished HC Flat Top Semi Finish 76/28mm Flat Top Semi-Finish Super AR, 70/28mm Progressive Semi-Finish HC 70/76mm Progressive Semi-Finish AR 73mm Progressive Reg. & Short Cor. S.F.

N:1.60 Single Vision Finish HC & AR Single Vision Aspheric HC, 70/68mm Single Vision Finish AR Single Vision Finish Aspheric AR Single Vision Semi-Finish HC UV 75mm HOLENS MR-8 Asp. Single Vision S.F. Super AR *Exclusive Flat Top Semi-Finish HC 70/28mm N:1.67 Single Vision Finish Aspheric HC, 75/70mm Single Vision Finish Aspheric, Ultraclear AR, 75/70mm HOLENS MR-7 Asp. Single Vision S.F. HC Younger Spherical SF Single Vision, HC 74mm Flat Top Semi-Finish HC 74/28mm Younger Progressive Image Semi-Finish HC 74mm N:1.74 Single Vision Finish Super AR Asp. Single Vision Semi-Finish uncoated & HC Photochromic N:1.56 Grey or Brown HOLENS Lite Sensor Single Vision F. HC (High Cyl. Avail.) HOLENS Lite Sensor Single Vision F. AR HOLENS Lite Sensor Single Vision S.F. HC & AR *Exclusive HOLENS Lite Sensor Flat Top Finish HC & AR *Exclusive HOLENS Lite Sensor Flat Top Semi-Finish HC HOLENS Lite Sensor Prog. Short Cor. F. HC & AR*Exclusive HOLENS Lite Sensor Prog. Short Cor. S.F. HC Photochromic Polycarbonate Grey or Brown Single Vision Finish HC & AR *Exclusive Flat Top Finish HC & AR *Exclusive Progressive Reg. & Short Cor. Finish. HC & AR *Exclusive HOLENS Single Vision Semi-Finish HC *Exclusive HOLENS Flat Top Semi-Finish HC *Exclusive HOLENS Progressive Reg. & Short Cor. S.F. HC *Exclusive Sun Lenses Tinted Plano F. 70mm, Solid or Gradient (Grey, G15, Brown) HOLENS ImageClear CR39 Plano HC HOLENS ImageClear CR39 Single Vision S.F. CR39 Flat Top Semi-Finish HC L-28, L-35 & Trifocal 7x28 CR39 Progressive Semi-Finish HC (Image & Adage) Polycarbonate Single Vision Semi-Finish Polycarbonate Flat Top Semi-Finish Polycarbonate Progressive Semi-Finish N:1.60, N:1.67 & Triology Single Vision S.F. HC

Private Label Available Demo Lens Also Available

19

Glass Lens GRISTAL Photogrey-xtra Single Vision F. 65mm (high cyl. available) GRISTAL Photogrey-Flat Top F. 65/28mm HOLENS Photogrey-xtra Single Vision S.F. HOLENS Photogrey-xtra Flat Top Finish *Exclusive HOLENS Photogrey-xtra Flat Top Semi-Finish HOLENS PhotoBrown-xtra Single Vision S.F. CRISTAL White Single Vision Finish HOLENS White Single Vision Semi-Finish HOLENS White Flat Top Semi-Finish HOLENS N:1.70 White Single Vision S.F. *Exclusive Corning PGX S.F. Single Vision / Flat Top / Progressive Sun SensorÆ N:1.56 (Gray & Brown) Single Vision Finish HC & AR 70/65mm Single Vision Semi-Finish HC 70mm Flat Top L-28 Semi-Finish HC Progressive S.F. HC 75/70mm Progressive Semi-Finish min, short corri. HC 75/70mm Transition VIIÆ (Gray & Brown) CR39 Single Vision Finish HC & AR CR39 Single Vision Semi-Finish CR39 Flat Top Semi-Finish L-28 & L-35 HC CR39 Trifocal Semi-Finish 7x28 & 8x35 HC CR39 Progressive Image S.F. HC Polycarbonate Single Vision Finish HC & AR 70/65mm Polycarbonate Single Vision S.F. HC Polycarbonate Composite Flat Top 75/28mm Polycarbonate Progressive S.F. Image & Adage HC Trilogy Single Vision Semi-Finish Asp. & Spherical Trilogy Flat Top L-28 Semi-Finish Trilogy image Progressive Semi-Finish HC 76mm N: 1.60 MR-8 Finish S.V. AR N:1.60 MR-8 Semi-Finish S.V. HC N:1.67 Progressive Image Semi-Finish HC N: 1.74 Single Vision Semi-Finish Gray HC Transition XTRActiveÆ (Gray & Brown) N:1.50 Single Vision Finish HC N:1.50 Single Vision Semi-Finish HC N:1.50 Flat Top L-28 Semi-Finish HC N:1.50 Trifocal 7x28 Semi-Finish HC N:1.50 Progressive Image S.F. HC Polycarbonate Single Vision F. HC Polycarbonate Single Vision S.F. HC Polycarbonate Progressive Image S.F. HC Trilogy Single Vision Semi-Finish HC Trilogy Progressive Image S.F. HC N:1.67 Single Vision Semi-Finish HC

DrivewearÆ Hard Resin Single Vision Finish Plano HC Hard Resin Single Vision Semi-Finish HC Hard Resin Flat Top L-28 Semi-Finish HC Hard Resin Progressive Image S.F. HC Polycarbonate Single Vision Semi-Finish HC Polycarbonate Progressive Image S.F. HC TrilogyÆ TRIVEX Single Vision Finish HC & AR TRIVEX Single Vision Semi-Finish Asp. & Spherical TRIVEX Flat Top Semi-Finish HC TRIVEX Progressive Image PAL S.F. HC

Mirror Coating Available In Stock on HOLENS Brand Lens

E.M.I. Coating and Blue Ray Cut Available for some Lenses

20

Hortron Enterprise, Inc. Add: 201 N. Corona Ave., Suite 104 Ontario, California 91764, USA Tel: (909) 988-7328, (909) 621-2628 Fax: (909) 988-7158 Email: hortron@yahoo.com sales@hortron.com Web: www.hortron.com www.hortronoptical.com Twitter: @HortronOptical Instagram: @HortronOptical Facebook: www.Facebook.com/Hortron YouTube: https://www.youtube.com/user/hortron1 LinkedIn: https://www.linkedin.com/in/hortron-optical-~your-reliable-source-8a72a232