F O R M U L AT I O N S

�

Blending science with creativity is an art. At Innospec we call it scientivity. With our range of high quality personal care ingredients, you can improve processes and formulations to invigorate your products and maximize consumer appeal.

Whether you want to excite consumers with new hair care products or skin cleansers, improve performance in sunscreens or antiperspirants, or develop environmentally-friendly solutions, we have the technologies and expertise you need.

Our researchers and formulation scientists are continually developing new formulations to showcase our products and inspire formulators around the world. We’ve chosen a few of our favorites to include in this booklet. Each one demonstrates how our ingredients can be used to create end products with particular performance benefits.

Luscious lather sulfate-free bodywash - AC136

This sulfate-free bodywash combines Iselux® and Pureact WS Conc. to produce dense creamy lather. Activsoft C-17 imparts a soft, elegant feel to the skin and enhances foam quality with Activsoft S and Aminol® CM flakes thickening the formulation and stabilizing the foam. Finsolv® TN acts as a solubilizer to gently remove soils from the skin and provides conditioning.

Silk touch day cream - S0110

This feather-light moisturizer features Activemol EH-25, which provides great emolliency and skin-feel without any oiliness. A mineral oil free formulation, it benefits from added vitamins and also uses Natrlquest® E30, Innospec’s biodegradable chelating agent.

Everyday sulfate-free shampoo - H0048

This cost effective sulfate-free salt thickened shampoo contains CAPB as the primary surfactant and Iselux® as the secondary surfactant to give rich dense creamy lather.

Luxury sulfate-free shampoo - H0050

A crystal clear shampoo featuring the dense luxurious lather of Iselux® LQ-CLR and Pureact WS CONC in a sulfate-free formulation. This premium shampoo has excellent foaming and feel. When compared to a typical commercial SLES / CAPB formulation the feel and foaming is much improved.

Clearly kind foaming hand wash - AC011b

Iselux® gives a long-lasting luxurious foam to this clear cleansing wash. Finsolv® SLB-201 and Finsolv® EMG-20 ensure a soft moisturized after-feel on the skin. The formulation is also ideal for a mild and gentle face wash.

Golden goddess moisturizer - S0087

This light, readily absorbed moisturizer leaves a subtle golden sheen on the skin. It contains Finsolv® TN which provides emolliency and removes any oiliness associated with using other oils. The formulation is thickened with Rhesperse RM100.

Light as a feather sunscreen spray - AC069

This sunscreen spray uses Finsolv® TPP and Finsolv® EB as the solubilizers for the organic sunscreen agents. Finsolv® TPP offers enhanced solubilization versus Finsolv® TN so only a small amount is required. Finsolv® EB helps to achieve a totally non-greasy formulation that is easily applied and absorbed.

�

Blending science with creativity is an art. At Innospec we call it scientivity. With our range of high quality personal care ingredients, you can improve processes and formulations to invigorate your products and maximize consumer appeal.

Whether you want to excite consumers with new hair care products or skin cleansers, improve performance in sunscreens or antiperspirants, or develop environmentally-friendly solutions, we have the technologies and expertise you need.

Our researchers and formulation scientists are continually developing new formulations to showcase our products and inspire formulators around the world. We’ve chosen a few of our favorites to include in this booklet. Each one demonstrates how our ingredients can be used to create end products with particular performance benefits.

Luscious lather sulfate-free bodywash - AC136

This sulfate-free bodywash combines Iselux® and Pureact WS Conc. to produce dense creamy lather. Activsoft C-17 imparts a soft, elegant feel to the skin and enhances foam quality with Activsoft S and Aminol® CM flakes thickening the formulation and stabilizing the foam. Finsolv® TN acts as a solubilizer to gently remove soils from the skin and provides conditioning.

Silk touch day cream - S0110

This feather-light moisturizer features Activemol EH-25, which provides great emolliency and skin-feel without any oiliness. A mineral oil free formulation, it benefits from added vitamins and also uses Natrlquest® E30, Innospec’s biodegradable chelating agent.

Everyday sulfate-free shampoo - H0048

This cost effective sulfate-free salt thickened shampoo contains CAPB as the primary surfactant and Iselux® as the secondary surfactant to give rich dense creamy lather.

Luxury sulfate-free shampoo - H0050

A crystal clear shampoo featuring the dense luxurious lather of Iselux® LQ-CLR and Pureact WS CONC in a sulfate-free formulation. This premium shampoo has excellent foaming and feel. When compared to a typical commercial SLES / CAPB formulation the feel and foaming is much improved.

Clearly kind foaming hand wash - AC011b

Iselux® gives a long-lasting luxurious foam to this clear cleansing wash. Finsolv® SLB-201 and Finsolv® EMG-20 ensure a soft moisturized after-feel on the skin. The formulation is also ideal for a mild and gentle face wash.

Golden goddess moisturizer - S0087

This light, readily absorbed moisturizer leaves a subtle golden sheen on the skin. It contains Finsolv® TN which provides emolliency and removes any oiliness associated with using other oils. The formulation is thickened with Rhesperse RM100.

Light as a feather sunscreen spray - AC069

This sunscreen spray uses Finsolv® TPP and Finsolv® EB as the solubilizers for the organic sunscreen agents. Finsolv® TPP offers enhanced solubilization versus Finsolv® TN so only a small amount is required. Finsolv® EB helps to achieve a totally non-greasy formulation that is easily applied and absorbed.

Luscious lather sulfate-free bodywash AC136A mild, sulfate-free cleansing bodywash which demonstrates the ability of Iselux® to create structured systems delivering high oil content while retaining excellent foaming properties.

INCI ingredientsAquaSodium ChlorideGuar Hydroxypropyltrimonium ChlorideDisodium CocoamphodiacetateSodium Methyl Cocoyl TaurateCyamopsis Tetragonoloba (Guar) GumGlycerinSodium Lauroyl Methyl IsethionateCocamide MEACocamidopropyl BetaineCanola OilC12-15 Alkyl BenzoatePreservative, Dye(s), ParfumCitric Acid (50% aqueous solution) Preparation procedure Prepare phase A with gentle stirring.With smooth mechanical agitation, slowly blend B into system. Mix until completely dispersed and uniform.Slowly blend C into system and mix until uniform. Warm system to 40-45ºC with smooth mechanical agitation.Slowly blend premix D into main system and mix until uniform.Add phase E ingredients to system sequentially with gentle stirring.Remove heat and blend phase F into main system.Add compatible perfume, dye(s) and preservative.Adjust pH of system to 5.0-5.6 with citric acid solution (50% aqueous) as required. System should thicken noticeably with pH adjustment. Mix gently for at least 30 minutes to reach final consistency.

PropertiesAppearance : White creampH : 5-5.6Viscosity* : 200,000-250,000cpsStability : 1 month at 45ºC

* Brookfield T-B @ 0.5rpm, 25oC

Trade name (supplier)

Activsoft C-17 (Innospec)Miranol C2M Conc. NP (Rhodia)Pureact WS Conc. (Innospec)Activsoft S (Innospec)

Iselux® LQ-CLR-SB (Innospec)Aminol® CM Flakes (Innospec)Mirataine BET C-30 (Rhodia)Rita Canola Oil (Rita Corp.)Finsolv® TN (Innospec)

%w/wq.s. to 1004.000.207.507.500.501.0030.003.5010.0010.002.00q.s.q.s. to pH 5.0-5.6

A

BC

D

E

F

GH

12345678

Silk touch day cream S0110A quickly absorbed, light, silky moisturizing lotion for the face and neck. This formulation is cold process and mineral oil free.

INCI ingredients AquaTrisodium Ethylenediamine DisuccinateGlycerinDimethicone PEG-7 IsostearateC12-15 Alkyl EthyhexanoateDimethicone, 350cpsTocopherol AcetateSodium PolyacrylatePreservativeParfum

Preparation procedurePrepare phases A and B separately with gentle mixing until uniform.Add B to A with stirring.Add C with gentle mixing and stir until uniform.

PropertiesAppearance : Glossy, white lotion pH : 6.0-6.5 Viscosity* : 18,000-20,000cpsStability : Passed 1 month at 45oC

* Brookfield RVT @ 20rpm, 25oC, #6 spindle

Trade name (supplier)

Natrlquest® E30 (Innospec)

Silsense DW-18 (Surfachem)Activemol EH-25 (Innospec)Abil 350 (Evonik)

Rhesperse RM100 (Innospec)Euxyl K100 (Schülke & Mayr)

%w/wq.s to 1000.103.001.008.001.500.201.50q.sq.s

A

B

C

123

Luscious lather sulfate-free bodywash AC136A mild, sulfate-free cleansing bodywash which demonstrates the ability of Iselux® to create structured systems delivering high oil content while retaining excellent foaming properties.

INCI ingredientsAquaSodium ChlorideGuar Hydroxypropyltrimonium ChlorideDisodium CocoamphodiacetateSodium Methyl Cocoyl TaurateCyamopsis Tetragonoloba (Guar) GumGlycerinSodium Lauroyl Methyl IsethionateCocamide MEACocamidopropyl BetaineCanola OilC12-15 Alkyl BenzoatePreservative, Dye(s), ParfumCitric Acid (50% aqueous solution) Preparation procedure Prepare phase A with gentle stirring.With smooth mechanical agitation, slowly blend B into system. Mix until completely dispersed and uniform.Slowly blend C into system and mix until uniform. Warm system to 40-45ºC with smooth mechanical agitation.Slowly blend premix D into main system and mix until uniform.Add phase E ingredients to system sequentially with gentle stirring.Remove heat and blend phase F into main system.Add compatible perfume, dye(s) and preservative.Adjust pH of system to 5.0-5.6 with citric acid solution (50% aqueous) as required. System should thicken noticeably with pH adjustment. Mix gently for at least 30 minutes to reach final consistency.

PropertiesAppearance : White creampH : 5-5.6Viscosity* : 200,000-250,000cpsStability : 1 month at 45ºC

* Brookfield T-B @ 0.5rpm, 25oC

Trade name (supplier)

Activsoft C-17 (Innospec)Miranol C2M Conc. NP (Rhodia)Pureact WS Conc. (Innospec)Activsoft S (Innospec)

Iselux® LQ-CLR-SB (Innospec)Aminol® CM Flakes (Innospec)Mirataine BET C-30 (Rhodia)Rita Canola Oil (Rita Corp.)Finsolv® TN (Innospec)

%w/wq.s. to 1004.000.207.507.500.501.0030.003.5010.0010.002.00q.s.q.s. to pH 5.0-5.6

A

BC

D

E

F

GH

12345678

Silk touch day cream S0110A quickly absorbed, light, silky moisturizing lotion for the face and neck. This formulation is cold process and mineral oil free.

INCI ingredients AquaTrisodium Ethylenediamine DisuccinateGlycerinDimethicone PEG-7 IsostearateC12-15 Alkyl EthyhexanoateDimethicone, 350cpsTocopherol AcetateSodium PolyacrylatePreservativeParfum

Preparation procedurePrepare phases A and B separately with gentle mixing until uniform.Add B to A with stirring.Add C with gentle mixing and stir until uniform.

PropertiesAppearance : Glossy, white lotion pH : 6.0-6.5 Viscosity* : 18,000-20,000cpsStability : Passed 1 month at 45oC

* Brookfield RVT @ 20rpm, 25oC, #6 spindle

Trade name (supplier)

Natrlquest® E30 (Innospec)

Silsense DW-18 (Surfachem)Activemol EH-25 (Innospec)Abil 350 (Evonik)

Rhesperse RM100 (Innospec)Euxyl K100 (Schülke & Mayr)

%w/wq.s to 1000.103.001.008.001.500.201.50q.sq.s

A

B

C

123

Luxury sulfate-free transparent shampoo H0050A crystal clear shampoo featuring the dense luxurious lather of Iselux® LQ-CLR in a sulfate-free formulation. This shampoo has excellent foaming and feel.

INCI ingredients AquaTrisodium Ethylenediamine DisuccinateSodium Methyl Cocoyl TauratePolyquaternium-7Sodium Lauroyl Methyl IsethionatePreservativeCitric AcidParfumCocamidopropyl Betaine

Preparation procedurePrepare phase A, heat to 30-40oC.With smooth agitation blend B into the system. Mix until uniform, remove heat.Blend C into the system, mix until uniform.Add D then E with gentle stirring.With smooth agitation blend in F. The product will thicken considerably. Trace levels (0.1-2.0%) can be used to further thicken the formula as desired.

PropertiesAppearance : Transparent Liquid pH : 5.5-6.0Viscosity* : 5,000-10,000cpsStability : Passed 1 month at 45oC

* Brookfield RVT @ 20rpm, 25oC, #5 spindle

Trade name (supplier)

Natrlquest E30 (Innospec)Pureact WS Conc (Innospec)Condicare PQ7Iselux® LQ-CLR (Innospec)

Empigen BS/FA (Huntsman)

%w/wq.s to 1000.15.01.030.0q.spH to 5.5-6.0q.s16.0

A

BCDE

F

12345

Everyday sulfate-free shampoo H0048This sulfate-free salt thickened shampoo contains CAPB as the primary surfactant and Iselux® as the secondary surfactant to give rich luxurious foam.

INCI ingredients AquaPolyquaternium-10AquaSodium Lauroyl Methyl IsethionateTrisodium Ethylenediamine DisuccinateCocamidopropyl BetaineCitric AcidPreservativeParfumSodium Chloride

Preparation procedureAdd PQ-10 to the water, mix until dispersed.Add phase B sequentially with stirring and heat to 40ºC.Add C, maintain at 40ºC.Allow to cool, adjust pH with D.Add phase E, salt thicken adding at 0.2% increments until desired viscosity is reached.

PropertiesAppearance : Transparent LiquidpH : 5.5-6.0Viscosity* : 5,000-8,000cps Stability : 1 month at 45ºC

* Brookfield RVT @ 20rpm, 25oC, #5 spindle

Trade name (supplier)

Ucare Polymer JR-400 (Dow)

Iselux® (Innospec)Natrlquest E30 (Innospec)Empigen BS/FA (Huntsman)

%w/wq.s to 1000.1306.00.4520.0pH to 5.5-6.0q.sq.s0.4

A

B

CDE

12345

Luxury sulfate-free transparent shampoo H0050A crystal clear shampoo featuring the dense luxurious lather of Iselux® LQ-CLR in a sulfate-free formulation. This shampoo has excellent foaming and feel.

INCI ingredients AquaTrisodium Ethylenediamine DisuccinateSodium Methyl Cocoyl TauratePolyquaternium-7Sodium Lauroyl Methyl IsethionatePreservativeCitric AcidParfumCocamidopropyl Betaine

Preparation procedurePrepare phase A, heat to 30-40oC.With smooth agitation blend B into the system. Mix until uniform, remove heat.Blend C into the system, mix until uniform.Add D then E with gentle stirring.With smooth agitation blend in F. The product will thicken considerably. Trace levels (0.1-2.0%) can be used to further thicken the formula as desired.

PropertiesAppearance : Transparent Liquid pH : 5.5-6.0Viscosity* : 5,000-10,000cpsStability : Passed 1 month at 45oC

* Brookfield RVT @ 20rpm, 25oC, #5 spindle

Trade name (supplier)

Natrlquest E30 (Innospec)Pureact WS Conc (Innospec)Condicare PQ7Iselux® LQ-CLR (Innospec)

Empigen BS/FA (Huntsman)

%w/wq.s to 1000.15.01.030.0q.spH to 5.5-6.0q.s16.0

A

BCDE

F

12345

Everyday sulfate-free shampoo H0048This sulfate-free salt thickened shampoo contains CAPB as the primary surfactant and Iselux® as the secondary surfactant to give rich luxurious foam.

INCI ingredients AquaPolyquaternium-10AquaSodium Lauroyl Methyl IsethionateTrisodium Ethylenediamine DisuccinateCocamidopropyl BetaineCitric AcidPreservativeParfumSodium Chloride

Preparation procedureAdd PQ-10 to the water, mix until dispersed.Add phase B sequentially with stirring and heat to 40ºC.Add C, maintain at 40ºC.Allow to cool, adjust pH with D.Add phase E, salt thicken adding at 0.2% increments until desired viscosity is reached.

PropertiesAppearance : Transparent LiquidpH : 5.5-6.0Viscosity* : 5,000-8,000cps Stability : 1 month at 45ºC

* Brookfield RVT @ 20rpm, 25oC, #5 spindle

Trade name (supplier)

Ucare Polymer JR-400 (Dow)

Iselux® (Innospec)Natrlquest E30 (Innospec)Empigen BS/FA (Huntsman)

%w/wq.s to 1000.1306.00.4520.0pH to 5.5-6.0q.sq.s0.4

A

B

CDE

12345

Golden goddess moisturizer S0087A rapidly absorbed, silky moisturizing lotion which leaves a golden sparkle on the skin.

INCI ingredients AquaTrisodium Ethylenediamine DisuccinateGlycerinPolyquaternium-7Isopropyl PalmitateCaprylic TriglycerideDimethicone PEG-7 IsostearateC12-15 Alkyl BenzoateMineral Oil – lightDimethicone, 350cpsTocopherol AcetatePanthenolCalcium Sodium Borosilicate, Titanium Dioxide, Tin OxideSodium PolyacrylatePreservativeParfum

Preparation procedurePrepare phases A and B separately with stirring.Add B to A with stirring.Add C with gentle mixing until uniform.

PropertiesAppearance : Glossy, white lotion pH : 6.0-6.5 Viscosity* : 18,000-20,000cpsStability : Passed 1 month at 45oC

* Brookfield RVT @ 20rpm, 25oC, #6 spindle

Trade name (supplier)

Natrlquest® E30 (Innospec) Condicare PQ7 (Innospec)

Silsense DW-18 (Surfachem)Finsolv® TN (Innospec)

Abil 350 (Evonik)

Reflecks Gleams of Gold (Engelhard)Rhesperse RM100 (Innospec)Euxyl K100 (Schülke & Mayr)

%w/wq.s to 1000.102.002.004.002.001.001.001.001.500.200.201.501.50q.sq.s

A

B

C

123

Clearly kind foaming hand wash AC011bUltra mild, clear hand wash that provides a dense, stable foam when delivered via pump dispenser. It imparts a long-lasting, creamy lather on application, low tack on dry down and a soft, moisturizing, silky after-feel on the skin.

INCI ingredients AquaSodium Lauroyl Methyl Isethionate GlycerinPolyquaternium-10Sodium Methyl Cocoyl TaurateDimethicone PEG-8 BenzoateMethyl Gluceth-20 BenzoatePreservative, ParfumCitric Acid (50% aqueous solution)

Preparation procedurePrepare phase A, heating to 45-50ºC with stirring.Add the premix of phase B and mix until uniform.Slowly blend in phase C ingredients one at a time and mix until uniform.Cool system to 30-35ºC. Slowly blend in preservative and mix until uniform.Adjust pH to 5.5-6.0 with 50% aqueous citric acid solution. PropertiesAppearance : Clear, thin liquid pH : 5.5-6.0Stability : Passed 1 month at 45oC

Trade name (supplier)

Iselux® LQ-CLR-SB (Innospec)

Ucare Polymer JR-125 (Dow)Pureact WS Conc. (Innospec)Finsolv® SLB-201 (Innospec)Finsolv® EMG-20 (Innospec)

%w/wq.s to 10025.001.000.203.000.501.00q.s.q.s. to pH 5.5-6.0

A

B

C

DE

12345

Golden goddess moisturizer S0087A rapidly absorbed, silky moisturizing lotion which leaves a golden sparkle on the skin.

INCI ingredients AquaTrisodium Ethylenediamine DisuccinateGlycerinPolyquaternium-7Isopropyl PalmitateCaprylic TriglycerideDimethicone PEG-7 IsostearateC12-15 Alkyl BenzoateMineral Oil – lightDimethicone, 350cpsTocopherol AcetatePanthenolCalcium Sodium Borosilicate, Titanium Dioxide, Tin OxideSodium PolyacrylatePreservativeParfum

Preparation procedurePrepare phases A and B separately with stirring.Add B to A with stirring.Add C with gentle mixing until uniform.

PropertiesAppearance : Glossy, white lotion pH : 6.0-6.5 Viscosity* : 18,000-20,000cpsStability : Passed 1 month at 45oC

* Brookfield RVT @ 20rpm, 25oC, #6 spindle

Trade name (supplier)

Natrlquest® E30 (Innospec) Condicare PQ7 (Innospec)

Silsense DW-18 (Surfachem)Finsolv® TN (Innospec)

Abil 350 (Evonik)

Reflecks Gleams of Gold (Engelhard)Rhesperse RM100 (Innospec)Euxyl K100 (Schülke & Mayr)

%w/wq.s to 1000.102.002.004.002.001.001.001.001.500.200.201.501.50q.sq.s

A

B

C

123

Clearly kind foaming hand wash AC011bUltra mild, clear hand wash that provides a dense, stable foam when delivered via pump dispenser. It imparts a long-lasting, creamy lather on application, low tack on dry down and a soft, moisturizing, silky after-feel on the skin.

INCI ingredients AquaSodium Lauroyl Methyl Isethionate GlycerinPolyquaternium-10Sodium Methyl Cocoyl TaurateDimethicone PEG-8 BenzoateMethyl Gluceth-20 BenzoatePreservative, ParfumCitric Acid (50% aqueous solution)

Preparation procedurePrepare phase A, heating to 45-50ºC with stirring.Add the premix of phase B and mix until uniform.Slowly blend in phase C ingredients one at a time and mix until uniform.Cool system to 30-35ºC. Slowly blend in preservative and mix until uniform.Adjust pH to 5.5-6.0 with 50% aqueous citric acid solution. PropertiesAppearance : Clear, thin liquid pH : 5.5-6.0Stability : Passed 1 month at 45oC

Trade name (supplier)

Iselux® LQ-CLR-SB (Innospec)

Ucare Polymer JR-125 (Dow)Pureact WS Conc. (Innospec)Finsolv® SLB-201 (Innospec)Finsolv® EMG-20 (Innospec)

%w/wq.s to 10025.001.000.203.000.501.00q.s.q.s. to pH 5.5-6.0

A

B

C

DE

12345

Light as a feather sunscreen spray AC0693* SPF 18+ sunscreen spray featuring Finsolv® TPP with a broad-spectrum UV protection and a smooth, silky after-feel.

INCI ingredients AquaTrisodium Ethylenediamine DisuccinateGlycerinXanthan GumTriethanolamineC12-15 Alkyl Benzoate (and) Dipropylene Glycol Dibenzoate (and) PPG-15 Stearyl Ether Benzoate Butyl MethoxydibenzoylmethaneEthylhexyl MethoxycinnamateCetyl AlcoholButyrospermum ParkiiDimethicone PEG-8 BenzoateEthylhexyl BenzoatePhenyl TrimethiconeAcrylates/C10-30 Alkyl Acrylates crosspolymerParfumMethyl Gluceth-20 BenzoatePreservative

Preparation procedureAdd Natrlquest® E30 into water.Start to heat at 75oC and add premix B and ingredient C.In a separate vessel, mix and melt ingredients D to 75oC.Add ingredient E to oil phase at 75oC with stirring until evenly dispersed.Add oil phase (D) to water phase at 75oC with stirring.Start cooling and add and mix ingredients F and G below 50oC and continue mixing to below 25 oC.

PropertiesAppearance : Milky white pH : 5.5-6.0 Stability : 1 month at 45oC Viscosity* : 1,000-3,000 cpsStar rating : 3** Brookfield DV-E @ 50rpm, 27-30ºC, #2 spindle + 5 person in-vivo SPF test

Trade name (supplier)

Natrlquest® E30 (Innospec)

Keltrol CG-SFT (CP Kelco)

Finsolv® TPP (Innospec)

Eusolex 9020 (EMD Chemicals)Eusolex 2292 (EMD Chemicals)

Shebu (Rita Corporation)Finsolv® SLB-201 (Innospec)Finsolv® EB (Innospec)DC 556 Cosmetic Grade (Dow Corning)Pemulen TR-2 Polymer (Noveon)

Finsolv® EMG-20 (Innospec)

%w/wq.s to 1000.102.750.100.204.00

3.006.000.450.501.751.251.000.150.251.50q.s.

A

B

CD

EF

G

123456

® denotes that Natrlquest is a registered trade mark in the UK, the European Union and the USA in the name of Innospec Ltd

® denotes that Finsolv is a registered trade mark in the USA in the name of Innospec Active Chemicals

® denotes that Iselux is a registered trade mark in the UK in the name of Innospec Ltd

® denotes that Aminol is a registered trade mark in the USA in the name of Innospec Active Chemicals

Light as a feather sunscreen spray AC0693* SPF 18+ sunscreen spray featuring Finsolv® TPP with a broad-spectrum UV protection and a smooth, silky after-feel.

INCI ingredients AquaTrisodium Ethylenediamine DisuccinateGlycerinXanthan GumTriethanolamineC12-15 Alkyl Benzoate (and) Dipropylene Glycol Dibenzoate (and) PPG-15 Stearyl Ether Benzoate Butyl MethoxydibenzoylmethaneEthylhexyl MethoxycinnamateCetyl AlcoholButyrospermum ParkiiDimethicone PEG-8 BenzoateEthylhexyl BenzoatePhenyl TrimethiconeAcrylates/C10-30 Alkyl Acrylates crosspolymerParfumMethyl Gluceth-20 BenzoatePreservative

Preparation procedureAdd Natrlquest® E30 into water.Start to heat at 75oC and add premix B and ingredient C.In a separate vessel, mix and melt ingredients D to 75oC.Add ingredient E to oil phase at 75oC with stirring until evenly dispersed.Add oil phase (D) to water phase at 75oC with stirring.Start cooling and add and mix ingredients F and G below 50oC and continue mixing to below 25 oC.

PropertiesAppearance : Milky white pH : 5.5-6.0 Stability : 1 month at 45oC Viscosity* : 1,000-3,000 cpsStar rating : 3** Brookfield DV-E @ 50rpm, 27-30ºC, #2 spindle + 5 person in-vivo SPF test

Trade name (supplier)

Natrlquest® E30 (Innospec)

Keltrol CG-SFT (CP Kelco)

Finsolv® TPP (Innospec)

Eusolex 9020 (EMD Chemicals)Eusolex 2292 (EMD Chemicals)

Shebu (Rita Corporation)Finsolv® SLB-201 (Innospec)Finsolv® EB (Innospec)DC 556 Cosmetic Grade (Dow Corning)Pemulen TR-2 Polymer (Noveon)

Finsolv® EMG-20 (Innospec)

%w/wq.s to 1000.102.750.100.204.00

3.006.000.450.501.751.251.000.150.251.50q.s.

A

B

CD

EF

G

123456

® denotes that Natrlquest is a registered trade mark in the UK, the European Union and the USA in the name of Innospec Ltd

® denotes that Finsolv is a registered trade mark in the USA in the name of Innospec Active Chemicals

® denotes that Iselux is a registered trade mark in the UK in the name of Innospec Ltd

® denotes that Aminol is a registered trade mark in the USA in the name of Innospec Active Chemicals

For inspiration, ideas or further information, please contact us.

Innospec Active Chemicals

AmericasTel: +1 888 633 8028Email: americas-ac@innospecinc.com

Europe, Middle East and AfricaTel: +44 (0)151 348 5754Email: emea-ac@innospecinc.com

Asia-PacificTel: +65 6336 6286Email: aspac-ac@innospecinc.com

www.innospecinc.com

The facts stated and the recommendations

made are based on our own research and/

or the research of others, and are believed to

be accurate. No guarantee of their accuracy is

made, however, and unless otherwise expressly

provided by law or in written contract, the

materials are sold without warranties, expressed

or implied, in particular without guarantee as

to suitability for particular purpose. Innospec

assumes no responsibility for injury or damage

to users or third parties. Recipient agrees to

assume all risk and liability whether used singly

or in combination with other materials.

Printed on paper from well-managed forests

and other controlled sources

V2: 03 2011