Formato detallado para Investigador INVESTIGACIÓN Información …productividad.cimav.edu.mx/productividad/adjuntos... · 2019-01-30 · automotriz (VITRO-2014) (Colaborador) Monto:

Formato detallado para Investigador

INVESTIGACIÓN Información detallada Proyecto de investigación externo (Ciencia básica, FOMIX, etc) VER ANEXO I Proyecto de investigación externo (Financiado por industría) VER ANEXO II Participación en proyectos de investigación con otras instituciones

VER ANEXO III

Artículo publicado en revista de cobertura internacional con arbitraje incluida en Citation Index o en el Padrón de Revistas CONACYT.

VER ANEXO IV

Artículo in extenso con arbitraje publicado en congreso nacional.

VER ANEXO V

Artículo in extenso con arbitraje publicado en congreso internacional.

VER ANEXO V

Libro publicado (internacional)

VER ANEXO VI

Citas durante el período evaluado. (autocitas no válidas)

VER ANEXO VII

Arbitraje de artículo nivel internacional

VER ANEXO VIII

Arbitraje de proyectos científicos o tecnológicos

VER ANEXO VIII

Pertenencia al Sistema Nacional de Investigadores

VER ANEXO IX

Registro de patente

VER ANEXO X

FORMACIÓN DE RECURSOS HUMANOS Curso CIMAV: curricular o propedéutico

VER ANEXO XI

Dirección de tesis de doctorado (proceso)

VER ANEXO XII

Dirección de tesis de doctorado interna terminada

VER ANEXO XII

Dirección de tesis de doctorado externa terminada

VER ANEXO XII

Dirección de tesis de Maestría (proceso)

VER ANEXO XII

Dirección de tesis de maestría externa terminada

VER ANEXO XII

Dirección de tesis de licenciatura terminadas

VER ANEXO XII

Participación en comités tutorales

VER ANEXO XIII

Sinodal de examen de grado de maestría o doctorado, interno o externo

VER ANEXO XIII

VINCULACIÓN Ingresos facturados por derechos de patentes, proyectos, cursos, asesorías.

VER ANEXO XIV

ANEXO I Proyecto de investigación externo (Ciencia básica, FOMIX, etc)

1. Estudio de las propiedades de nanopartículas de ZnO en función de la variación de su

tamaño (CB - Responsable)$935,000.00

2. Fortalecimiento de equipo científico a través de la adquisición de un equipo de XPS para la caracterización de superficies e interfaces de materiales y nanomateriales del Centro de Investigación en Materiales Avanzados (CIMAV) Fortalecimiento y consolidación de la infraestructura científica y tecnológica de los centros públicos de investigación – CONACYT. 2011 (Responsable) $13,500,000.00

3. Investigación de las propiedades en materiales compósitos de base polimérica reforzados con nanotubos de carbono (CB- Dra. Liliana Licea Jiménez) (Colaborador)

4. Tribología y abrasión de PET y PVC en una cama granular fluidizada (Repatriación - Dr. Gabriel Caballero) (Colaborador)

5. Aprovechamiento de la energía solar mediante el desarrollo de compuestos nanopartícula metálica-polímero para su uso como material activo en celdas fotovoltáicas (FOMIX CHIH -CIMAV- Dra. Liliana Licea Jiménez) (Colaborador)

6. Implementación del método 3� para la caracterización térmica de materiales nano-estructurados para aplicaciones en termoelectricidad y barreras térmicas de operación en alta temperatura (Repatriación –Dr. Jaime Álvarez Quintana) (Responsable)

7. Investigación de la influencia de la incorporación de nanopartículas en matrices poliméricas curadas mediante radiación UV y su desempeño como recubrimientos (CB- Dra. Liliana Licea Jiménez) (Colaborador)

8. Estudio Fundamental Sobre Rectificación Térmica en Nanoestructuras: El Desarrollo del Diodo Térmico (CB- Dr. Jaime Alvarez Quintana) (Colaborador)

9. Estudio de la síntesis de nanocristales híbridos por un nuevo método basado en microemulsiones de aceite-en-agua y su incorporación en nanocompuestos poliméricos (CB- Dra. Margarita Sánchez) (Colaborador)

10. Materiales Nanoestructurados para Fotocatalisis : Produccion de Hidrogeno y degradacion de contaminantes poliméricos (CB- Dra. Margarita Sánchez) (Colaborador)

11. Estudio de las propiedades optoelectrónicas de materiales nanoestructurados basados en silicio (CB- Dr. Alfredo Morales Sánchez) (Colaborador)

12. Recubrimientos autolimpliables de alto desempeño para superficies fotovoltaicas. (CEMIESOL- Dra. Liliana Licea Jiménez) (Colaborador)

ANEXO II

Proyecto de investigación externo (Financiado por industría)

1. Asesoría sobre Cables deslizables tipo THHN (Conductores Monterrey Viakable – Dr. Gregorio Vargas 2008) (Colaborador) Monto: $ 60,000.00

2. Uso de nanopartículas en la fabricación de espumas de poliestireno extruído (Owens Corning- Dr. José Bonilla Cruz 2009-2010) (Colaborador) Monto: $ 2,500,000.00

3. Vidrio plano con control solar y color (VITRO- Dr. Mario Miki) (Colaborador)

4. Investigación para la separación de la mezcla PET/PVC (Grupo Simplex-2009 Dra. Liliana Licea Jiménez) (Colaborador ) Monto: $ 1,001,397.00

5. Innovación y desarrollo tecnológico de instrumental médico y quirúrgico: caracterización de materiales y desarrollo de proceso (GOVAL-2009 Dr. Servando Aguirre Tostado) (Colaborador ) Monto: $ 1,081,131.99

6. Modificación en la línea de Botanas (CONAGRA FOODS-2010) Monto: $ 4,481,000.00 (Líder )

7. Diplomado de Nanotecnología al Cluster de Nano Nuevo León (Dr. José Bonilla Cruz - 2011) (Colaborador ) Monto: $241,379.00

8. Desarrollo de nuevos productos y empaques en las líneas de palomitas, salsas, enlatados y aceites (CONAGRA FOODS-2011) Monto: $ 570,890.00 (Líder )

9. Desarrollo de una formulación a nivel laboratorio de un acondicionador textil con propiedades antiarrugas (ALEN-2011) Monto: $ 2,180,000.00 (Líder )

10. Módulos El Mundo de los Materiales, I2T2, Nuevo León (I2T2-2012 Dr. Paul Horley) (Colaborador ) Monto: $ 500,000.00

11. Desarrollo de corazones ultradelgados para componentes automotrices de alto desempeño energético y mecánico-estructural utilizando materiales nano estructurados (Nemak-2012 Dra. Tania Ernestina Lara Ceniceros) (Colaborador ) Monto: $ 2,229,463.40

12. Desarrollo y evaluación de nuevas aplicaciones de cargas funcionales en forma de microesfera y desarrollo de planta piloto para la obtención de cargas funcionales en forma de “laminillas micronizadas” para su aplicación en recubrimientos (Termolita-2012 Dr. Jaime Alvarez Quintana) (Colaborador ) Monto: $ 562,061.39

13. Desarrollo de un prototipo tipo “vending machine” el cual surtirá producto explotado con el sabor deseado (CONAGRA FOODS-2012) Monto: $ 5,289,178.30 (Líder )

14. Generación de espuma de PU de baja densidad con propiedades mecánicas reforzadas (QUÍMICA PUMEX-2013) Monto: $2,803,215.85 (Lider)

15. desarrollo de corazones ultradelgados para componentes automotrices de alto desempeño energético y mecánico-estructural utilizando materiales nano estructurados (NEMAK -2013) (Colaborador) Monto: $2,229,000.00

16. Desarrollo de productos para las nuevas lineas estratégicas de negocio mediante innovación radical (CONAGRA FOODS-2013) Monto: $2,200,000.00 (Lider)

17. Desarrollo de plataforma tecnológico para el diseño de recubrimientos arquitectónicos mediante la incorporación de nanopartículas de Si y otras partículas especiales (COMEX-2013) (Colaborador) Monto: $660,000.00

18. Evaluación del desempeño de recubrimientos reflejantes emisivos para techos de viviendas (COMEX-2013) (Colaborador) Monto: $719,310.35

19. Desarrollo de productos, procesos y empaques para las líneas estratégicas de negocios mediante innovación radical (CONAGRA FOODS-2014) Monto: $2,540,216.80 (Lider)

20. Proceso Innovador de impresión nanométrica a escala piloto para generar eco-vidrio automotriz (VITRO-2014) (Colaborador) Monto: $229,173.50

21. Desarrollo del dispositivo de caracterización de propiedades del núcleo de acero al silicio de un transformador y la cuantificación de la contribución del sistema de sujeción del núcleo al nivel de pérdidas de eficiencia (PROLEC-2015) (Colaborador) Monto: $1,423,594.80

22. Poliuretano nanotecnológico resistente al fuego libre de halógenos para aplicaciones estratégicas. (QUÍMICA PUMEX-2015) Monto: $2,238,199.69 (Lider)


24. Desarrollo de un convertidor termoeléctrico para la recuperación y reciclado de energía térmica en sistemas de refrigeración (IMBERA-2016) (Colaborador) Monto: $2,191,611.47

25. Mejora de pasta de oxido de plomo y su desempeño con respecto a la variación de tamaño de las partículas de piso para su aplicación como material activo de acumuladores eléctricos (ENERYA GPO GOHNER-2016) Monto: $2,100,077.59 (Lider)

26. Innovación en Fórmulas y Empaques para las Plataformas de Botanas y Envasados con Impacto en la Sustentabilidad Ambiental (CONAGRA FOODS-2016) Monto: $1,753,130.87 (Lider)

27. Evaluación del desempeño de recubrimientos reflejantes emisivos para techos de viviendas (COMEX-2016) (Colaborador) Monto: $1,551,724.13

28. Innovación en empaques poliméricos y estudio térmico in-situ de bolsa transparente de palomitas (CONAGRA FOODS-2017) Monto: $1,416,380.92 (Lider)

29. Propuesta de proyectos de innovación en el área de implementación y desarrollo de productos. (Estudios exploratorios: Análisis Térmico) (QUÍMICA PUMEX-2017) Monto: $250,000.00 (Lider)

30. Estudio de PU's espreados de más de 1" y su estabilidad dimensional (QUÍMICA PUMEX-2018) Monto: $300,000.00 (Lider)

ANEXO III Participación en proyectos de investigación con otras instituciones

1. La estructura de nanopelículas de óxido de hafnio (CB-Cinvestav Qro. Dr. Alberto Herrera) (Colaborador)

2. Control del tamaño y la orientación cristalográfica de nanoparticulas de oro y su aplicación a la oxidación electrolítica de glucosa (CB- Dr. Federico Castañeda CIDETEQ- Qro) (Colaborador)

ANEXO IV Lista de artículos publicados en revistas JCR (16) en periodo a evaluar (2013 – 2018). I.F. periodo: 2.62 Total (35 JCR)

Los datos fueron recopilados directamente de las revistas.

No

Título del artículo

Revista

ISSN Factor

de Impacto

1. Fluorescence properties of Yb3+-Er3+ co-doped phosphate glasses containing silver nanoparticles

Methods and Applications in Fluorescence 6 (2018) 024005 https://doi.org/10.1088/2050-6120/aaab6c

2050-6120

2.656

2. Resistive switching control for conductive Si-nanocrystals embedded in Si/SiO2 multilayers

Nanotech. 29 (2018) 395203 https://doi.org/10.1088/1361-6528/aad24d

0957-4484

3.404

3. Preparation and Characterization of High Purity Anhydrous β-Lactose from α-Lactose Monohydrate at Mild Temperature

Intern. J Polymer. Sci. (2018) 5069063 https://doi.org/10.1155/2018/5069063

1687-9422

1.718

4. Functionalization Effect on Polymer Nanocomposites Coatings based on TiO2-SiO2 Nanoparticles with Superhydrophilic Properties

Nanomat. 8 (2018)369 https://doi.org/10.3390/nano8060369

2079-4991

3.504

5. Influence of the gate and dielectric thickness on the electro-optical performance of SRO-based LECs: Resistive switching, IR and deep UV emission

Journal of Luminescence 192 (2017) 919-924 https://doi.org/10.1016/j.jlumin.2017.08.034

022-2313 2.686

6. Thermal decomposition of N-expanded austenite in 304L and 904L steels Surface Engineering 33 (2017) 4 319-326 https://doi.org/10.1080/02670844.2016.1262989

0267-0844 1.347

7. Study of narrow and intense UV electroluminescence from ITO/SRO/Si-p and ITO/SRN/SRO/Si-p based light emitting capacitors

Journal of Luminescence 183 (2017) 334-340 https://10.1016/j.jlumin.2016.02.033

0022-2313

2.686

8. Engineered TiO2 and SiO2-TiO2 films on silica-coated glass for increased thin film durability under abrasive conditions

International Journal of Applied Ceramic Technology 14 (2017) 39-49 https://10.1111/ijac.12614

1546-542X

1.048

9. Synthesis of Zn-doped TiO 2 nanoparticles by the novel oil-in-water (O/W) microemulsion method and their use for the photocatalytic degradation of phenol

Journal of Environmental Chemical Engineering 3 (2015) 4 Part B 3037 – 3047 https://doi.org/10.1016/j.jece.2015.03.010

2213-3437 3.83 Cite

Score 10. Analysis of the luminescent centers in silicon rich silicon nitride light-

emitting capacitors Semiconductor Science and Technology 30 (2015) 065009 https://doi.org/10.1088/0268-1242/30/6/065009

0957-4484

2.305

11. Selective band gap manipulation of graphene oxide by its reduction with mild reagents

Carbon 93 (2015) 967-973 https://doi.org/10.1016/j.carbon.2015.06.013

0008-6223

6.337

12. Enhanced performance thermal diode via thermal boundary resistance at nanoscale

Applied Physics Letters 107 (2015) 084103 https://doi.org/10.1063/1.4929586

0003-6951

3.411

13. RF energy scavenging system for DC power from FM broadcasting based on an optimized Cockcroft-Walton voltage multiplier

Journal of Electromagnetic waves and applications 29 (2015) 1440-1453 https://doi.org/10.1080/09205071.2015.1047901

0920-5071

0.85

14. Behaviour of Carbon Steel in the Presence of Hydrocarbon and Pyridinic Compound

International Journal of Electrochemical Science 9 (2014) 1488-1496 http://www.electrochemsci.org/papers/vol9/90301488.pdf

1452-3981 1.469

15. Optical, Electrical and Photocatalytic Properties of the Ternary Semiconductors ZnxCd1-xS, CuxCd1-xS and CuxZn1-xS

International Journal of Photoenergy (2014) 158782 https://doi.org/10.1155/2014/158782

1110-662X

1.277

No

Título del artículo

Revista

ISSN

Factor

de Impacto

16. Microstructural, chemical and textural characterization of ZnO nanorods synthesized by aerosol assisted chemical vapor deposition

Materials Characterization 98 (2014) 215-221 https://doi.org/10.1016/j.matchar.2014.11.005

1044-5803

2.714

17. Multi‐technique characterization of low‐temperature plasma nitrided austenitic AISI 304L and AISI 904L stainless steel

Surface and Interface Analysis 46 (2014) 856-860 https://doi.org/10.1002/sia.5462

1096-9918 1.132

18. Physical properties of inulin and inulin-orange juice: Physical characterization and technological application

Carbohydrate Polymers 105 (2014) 10-19 https://doi.org/10.1016/j.carbpol.2013.12.079

0144-8617 4.811

19. Microstructural characterization, optical and photocatalytic properties of bilayered CuO and ZnO based thin films

Journal of Alloys and Compounds 615 (2014) S1 S375-S381 https://doi.org/10.1016/j.jallcom.2014.01.149

0025-8388

3.133

20. Magnon-mediated thermal rectification with forward-bias and breakdown temperatures

Journal of Applied Physics 114 (2013) 104904 https://doi.org/10.1063/1.4820937

0021-8979 2.176

ANEXO IV

PUBLICACIONES EN REVISTAS DE ALTO IMPACTO (REVISTAS INDEXADAS)

1. K E González–Flores, B Palacios-Márquez, J Álvarez–Quintana, S A Pérez–García, L

Licea–Jiménez, P Horley and A Morales-Sánchez “Resistive switching control for conductive Si-nanocrystals embedded in Si/SiO2 multilayers” Nanotech. 29 (2018) 395203

2. Arturo Román Vázquez-Velázquez, Miguel Angel Velasco-Soto , Sergio Alfonso Pérez-

García and Liliana Licea-Jiménez “Functionalization Effect on Polymer Nanocomposites Coatings based on TiO2-SiO2 Nanoparticles with Superhydrophilic Properties” Nanomat. 8 (2018)369

3. Ana L. López-Pablos, César C. Leyva-Porras, Macrina B. Silva-Cázares, Francisco E.

Longoria-Rodríguez, Sergio A. Pérez-García, Ángel A. Vértiz-Hernández, and María Z.

Saavedra-Leos “Preparation and Characterization of High Purity Anhydrous β-Lactose from α-Lactose Monohydrate at Mild Temperature” Intern. J Polym. Sci. (2018) 5069063

4. Ma A Martínez Gámez, Miguel A Vallejo H, A V Kiryanov, L Licea-Jiménez, J L Lucio M and

S A Pérez-García “Fluorescence properties of Yb3+–Er3+ co-doped phosphate glasses containing silver nanoparticles” Methods Appl. Fluoresc 6 (2018) 2

5. S. A. Cabañas-Tay, L. Palacios-Huerta, M. Aceves-Mijares, J. Alvarez-Quintana, S. A.

Pérez-García, C. Domínguez-Horna and A. Morales-Sánchez “Influence of the gate and dielectric thickness on the electro-optical performance of SRO-based LECs: Resistive switching, IR and deep UV emission” J. Luminisc. 192 (2017) 919

6. G. Maistro, S.A. Pérez-García, M. Norell, L. Nyborg and Y. Cao “Thermal decomposition of

N-expanded austenite in 304L and 904L steels” Surf. Eng. 33 (2017) 4

7. S.A. Cabañas-Tay, L. Palacios-Huerta, M. Aceves- Mijares, A. Coyopol, F. Morales-Morales,

S.A. Pérez-García, L. Licea-Jiménez, C. Domínguez- Horna, K. Monfil-Leyva, A. Morales-

Sánchez “Study of narrow and intense UV electroluminescence from ITO/SRO/Si-p and ITO/SRN/SRO/Si-p based light emitting capacitors” J. Luminisc. 183 (2017) 334

8. Rosa Elena Ramírez-García, Jesús Alberto González-Rodríguez, Miguel Arroyo-Ortega,

Sergio Alfonso Pérez-García and Liliana Licea Jiménez “Engineered TiO2 and SiO2–TiO2 Films on Silica Coated Glass for Increased Thin Film Durability Under Abrasive Conditions” Int. J. Appl. Ceram. Technol. 14 (2017) 39-49

9. Margarita Sanchez-Dominguez, Getsemani Morales-Mendoza, Maria J Rodriguez-Vargas,

Claudia C Ibarra-Malo, Arturo A Rodriguez-Rodriguez, Andrea V Vela-Gonzalez, SA Perez-Garcia, Ricardo Gomez “Synthesis of Zn-doped TiO 2 nanoparticles by the novel oil-in-water (O/W) microemulsion method and their use for the photocatalytic degradation of phenol” J.

Environ. Chem. Eng. 3 (2015) 4

10. J.A. Leon-Gil, J.C. Perales-Cruz, L. Licea-Jimenez, S.A. Pérez Garcia & J. Alvarez-Quintana ” RF energy scavenging system for DC power from FM broadcasting based on an optimized Cockcroft–Walton voltage multiplier” J. Electromag. Waves Applic. 29 (2015) 1440-1453

11. M. Tovar-Padilla, L. Licea-Jimenez, S. A. Pérez-Garcia and J. Alvarez-Quintana “Enhanced

performance thermal diode via thermal boundary resistance at nanoscale” Appl. Phys. Lett.

107 (2015) 084103

12. S. A. Cabañas-Tay, L. Palacios-Huerta, M. Aceves-Mijares, J. A. Luna-López, S. Alcántara-

Iniesta, S. A. Pérez-García and A. Morales-Sánchez “Analysis of the luminescent centers in silicon rich silicon nitride light-emitting capacitors” Semicond. Sci. Technol. 30 (2015) 065009

13. M.A. Velasco-Soto, S.A. Pérez-García, J. Alvarez-Quintana, Yu-Cao, L. Nyborg, L. Licea-

Jiménez “Selective band gap manipulation of graphene oxide by its reduction with mild reagents” Carbon 93 (2015) 967-973

14. Sandra Andrea Mayén-Hernández, David Santos-Cruz,Francisco deMoure-Flores, Sergio

Alfonso Pérez-García, Liliana Licea-Jiménez, Ma. Concepción Arenas-Arrocena, José de

Jesús Coronel-Hernández and José Santos-Cruz “ Optical, Electrical and Photocatalytic Properties of the Ternary Semiconductors Zn!Cd1−!S, Cu!Cd1−!S and Cu!Zn1−!S” Inter.

J. Photoen. (2014) 158782

15. Lopez Leon, L. D., Veloz Rodriguez, M. A., Cruz, Reyes Cruz, V. E., Perez Garcia, S. A.,

Olguin Coca, F. J. “Behaviour of Carbon Steel in the Presence of Hydrocarbon and a Pyridinic Compound” Inter. J. Electrochem. Sci. 9 (2014) 1488-1496

16. Y Cao, G Maistro, M Norell, SA Pérez-Garcia, L Nyborg “Multi-technique characterization of

low-temperature plasma nitrided austenitic AISI 304L and AISI 904L stainless steel” Surf.

Inter. Anal. 46 (2014) 856-860

17. Sáenz-Trevizo, P. Amézaga-Madrid, P. Pizá-Ruiz, O. Solís-Canto, C. Ornelas-Gutiérrez, S. Pérez-García, M. Miki-Yoshida “Microstructural characterization, optical and photocatalytic properties of bilayered CuO and ZnO based thin films” J. Alloys & Comp. 615 (2014) S1 S375-S381

18. M.Z. Saavedra-Leos, C. Leyva-Porras, E. Martínez-Guerra, S.A. Pérez-García, J.A. Aguilar-

Martínez, C. Alvarez-Salas “Physical properties of inulin and inulin-orange juice: Physical characterization and technological application” Carbohydrates Polymers 105 (2014) 10-19

19. Angélica Sáenz-Trevizo; Patricia Amézaga-Madrid; Luis Fuentes-Cobas; Pedro Pizá-Ruiz;

Wilber Antúnez-Flores; Carlos Ornelas-Gutierrez; Sergio A.Pérez-García; Mario Miki-

Yoshida “Microstructural characterization, optical and photocatalytic properties of bilayered CuO and ZnO based thin films” Mater. Character. 98 (2014) 215-221

20. J.J. Martínez-Flores, L. Licea-Jimenez, S. A. Perez-Garcia and J. Alvarez-Quintana

“Magnon-mediated thermal rectification with forward-bias and breakdown temperatures” J.

Appl. Phys. 114 (2013) 104904

21. M. Z. Saavedra-Leos, C. Alvarez-Salas, M.A. Esneider-Acalá, A. Toxqui-Terán, S. A. Pérez-García, M. A. Ruiz- Cabrera “Towards an improved calorimetric methodology for glass

transition temperature determination in amorphous sugars” CyTA - J. Food 10 (2012) 639960

22. M. Z. Saavedra-Leos, A. Grajales-Lagunes, R. González-García, A. Toxqui-Teran, S. A. Pérez-García, M. Abud-Archila, M. A. Ruiz-Cabrera “Glass transition study in model food

systems prepared with mixtures of fructose, glucose and sucrose” J. Food Sci. 77 (2012) E118

23. Martinez-Flores, JJ ; Licea-Jimenez, L ; Pérez-Garcia S.A. ; Rodriguez-Viejo, J ; Alvarez-

Quintana, J. “ Comprehensive characterization of thermophysical properties in solids using

thermal impedance” J. Appl. Phys. 112 (2012) 094901

24. L. D. López León, M. A. Veloz Rodríguez, V. E. Reyes Cruz, S. A. Pérez García , A. L. López

León. “Inhibition on Carbon Steel Corrosion in Presence of Hydrocarbon”. Int. J. Electrochem.

Sci. 6 (2011) 5134-5145

25. L. D. López León, M. A. Veloz Rodríguez, V. E. Reyes Cruz, F. Almeraya Calderón, S. A. Pérez García “Corrosion of Carbon Steel in Presence of Hydrocarbon”. Int. J. Electrochem.

Sci. 6 (2011) 3497-3507

26. J. Alvarez-Quintana, S. A. Pérez-García, E. Martínez-Guerra, E. Pérez-Tijerina and J.

Rodríguez-Viejo “Temperature Dependent Thermal Conductivity of Polycrystalline ZnO Films”. J. Appl. Phys. 107 (2010) 063713

27. Hurtado-Macias, C. Domínguez-Ríos, J. Muñoz-Saldaña, R. Torres-Sánchez, S. A. Pérez-García and J. González-Hernández “Effect of the Surface Substrate Roughness and of the Chelating agent on the Microstructure and Mechanical Properties of Electroless Processed Brass Coatings”, Ind. Eng. Chem. Res., 2010, 49 (14), pp 6388–6393

28. R. Pérez-Bustamante, C. D. Gómez-Esparza, I. Estrada-Guel, M. Miki-Yoshida, L. Licea-

Jiménez, S. A. Pérez-García and R. Martínez-Sánchez, “Microstructural and mechanical characterization of Al-MWCNT composites produced by mechanical milling”, Mater. Sci. Eng.

A 502 (2009) 159-163

29. S. A. Pérez García and L. Nyborg, “Initial Formation of Contact Layers on Ni/SiC Samples Studied by XPS”, Surf. Interface Anal. 40 (2008) 1144-1148

30. Y. Cao, S. A. Pérez-García and L. Nyborg, “Investigation of Ni/Ta Contacts on 4H Silicon Carbide upon Thermal Annealing”, Appl. Surf. Sci. 254 (2007) 139–142

31. S. A. Pérez-García, and L. Nyborg, “Tailoring of Nickel Silicide Contacts on Silicon Carbide”,

Appl. Surf. Sci. 254 (2007) 135–138

32. Y. Cao, S. A. Pérez-García and L. Nyborg, “Interface Reactions and Electrical Properties of Ta/4H-SiC Contact”, Mater. Sci. Forum, 556-557(2007) 713-717.

33. L. Licea-Jiménez, A. Lund, P-Y. Henrio, T. M. Laurie, S. A. Perez-García, L. Nyborg, H.

Hassander, H. Bertilsson, R.W. Rychwalski, “MWNT Reinforced Melamine-Formaldehyde Containing Alpha-Cellulose”, Composites Science and Technology 67 (2007) 844–854

34. S. A. Pérez-García, and L. Nyborg, “Application of angle-resolved XPS for characterisation

of SiC/Ni2Si thin film systems”, Surf. Interface Anal.; 38 (2006) 859-862

35. Andrei Gromov, Staffan Dittmer, Johannes Svensson, Oleg A. Nerushev, Sergio Alfonso Pérez-García, Liliana Licea-Jiménez, Rodney Rychwalski and Elanor E. B. Campbell,

“Covalent amino-fuctionalisation of single-wall carbon nanotubes”, J. Mater. Chem., 15

(2005) 3334 – 3339.

36. R. Zhkharchenko, L. Licea-Jiménez, S. A. Pérez-García, P. Vorobiev, U. Dehesa-Carrasco,

J. F. Pérez-Robles, J. González-Hernández, Yu. Vorobiev, “Photovoltaic solar panel for a

hybrid PV/thermal system”, Solar Energy Material & Solar Cells 82 (2004) 253-261.

37. J. L. Almaral-Sanchez, J. Alvarez-Quintana, C. Araujo-Andrade, J. A. Calderón-Guillén, H.

Carrillo-Esquivel, E. A. Elizalde-Peña, N. Flores-Ramírez, F.A. Garcia-Pastor, O. Gomez-

Guzman, L. Licea-Jiménez, D. Meneses-Rodríguez, A. E. Peña-Hernández, S. A. Pérez-García, J. C. Rubio-Avalos, A. Salazar-Flores, M. Talavera-Ortega, G. Velazquez-García, L.

D. Vázquez-Santoyo, J. González-Hernández, “Preparation and characterization of sol-gel

silica based neutral optical density coating by the addition of graphite particles”, Thin Solid

Films 423 (2003) 196-200.

ANEXO V Artículo in extenso con arbitraje publicado en congreso nacional e internacional.

PUBLICACIONES IN EXTENSO

1. Marcelo Videa, L.M. Martínez, S. Castro, S.A. Pérez-García, L. Licea-Jiménez, A. Morales-Sánchez, M. Velasco-Soto, S. Garcia Esparza, M. Treviño, J.C. Ortiz Rodriguez “Caracterización Electroquímica de Materiales Activos Nanoestructurados y Nanoadicionados para una Batería Plomo-Ácido” XXXII SMEQ Junio de 2017, Guanajuato, México.

2. Y.V. Vorobiev, I.R. Chávez-Urbiola, S.A. Pérez-García, P. Vorobiev, “Quantum confinement effects in a glass/ito/cds/cdte superstrate structure designed for solar energy conversion” 6th International Conference on Science, Technology, Engineering and Management (ICSTEM), ISER International Conferences, 11 y 12 Octubre 2016 Paris, France

3. Margarita Sanchez-Dominguez, Getsemani Morales-Mendoza, Maria J Rodriguez-Vargas, Claudia C Ibarra-Malo, Arturo A Rodriguez-Rodriguez, Andrea V Vela-Gonzalez, SA Perez-Garcia, Ricardo Gomez “Synthesis of Zn-doped TiO2 nanoparticles by the novel oil-in-water (O/W) microemulsion method and their use for the photocatalytic degradation of phenol” 3rd Latin-American Congress of Photocatalysis, Photochemistry and Photobiology (3rdLACP3-2014) San Luis Pototsi, 14/10/2014

4. J A Luna López, A Benitez Lara, G García Salgado, D. Hernández de la Luz, M Pacio, A Morales Sánchez, S A Pérez García “ Annealing effect on the structural and optical properties of SiOx films deposited by HFCVD” Proceedings of the 8th International Conference on Sensing Technology, Liverpool, UK. 02-04 Sept 2014

5. A. Sáenz-Trevizo, P. Amézaga-Madrid, P. Pizá-Ruíz, W. Antúnez-Flores, C. Ornélas-Gutiérrez , S. A. Pérez-García and M. Miki-Yoshida “Synthesis and Characterization of highly reproducible Zinc Oxide nanorods and their photocatalytic efficiencies” TOCAT7 2014, Kyoto Japón 01 -06 Junio 2014

6. Cao, Y.; Perez-Garcia, S. A.; Nyborg, L. “Interface reactions and electrical properties

of Ta/4H-SiC contacts ” Silicon Carbide and Related Materials 2006 Book Series:

MATER SCI FORUM Volume: 556-557 Pages: 713-716 Published: 2007 7. Saavedra-Leos, Z., Grajales-Lagunes A., González-García R., Toxqui-Terán, A.,

Pérez.-García, S. Abud-Archila, M., Moscosa-Santillán, M. Ruiz-Cabrera M.A. “Glass

transition temperature and water activity of model food systems analogous to fruit

powder composition” 5th International Congress on Food Science and Food

Biotechnology in Developing Countries. Puerto Vallarta, Mexico • 24/10/2012 -

26/10/2012 Asociación Mexicana de Ciencia de los Alimentos A.C. & Inocuidad

Alimentaria 2012 (Food Safety 21012) Publicado: 24/10/2012 8. M. Z. Saavedra- Leos, A. Grajales-Lagunes, A. Toxqui -Terán, S. A. Pérez -Garcia y

M. A. Ruiz- Cabrera ”Determinación de temperaturas de transición vítrea en sistemas modelos ricos en azúcares" Centro de Investigación y Estudios de Posgrado (CIEP), Facultad de Ciencias Químicas, Universidad Autonoma de San Luis Potosí. ** Centro de Investigación de Materiales Avanzados (CIMAV), Unidad Monterrey, Nuevo Leon, México. Encuentro Nacional de la AMIDIQ. Bahías de Huatulco, Oaxaca, México • 04/05/2010 - 07/05/2010. Academia Mexicana de Investigación y Docencia en Ingeniería Química (AMIDIQ). Publicado: 04/05/2010

9. Licea-Jimenez, L; Perez-Garcia, SA; Vorobiev, PY “Energy balance of hybrid systems consisting of wind and photovoltaic generators and solar thermal plane collector” Book Group Author(s): IEEE. Conference: 1st International Conference on Electrical and Electronics Engineering (ICEEE) Location: Acapulco, MEXICO Date:

SEP 08-10, 2004. Source: 2004 1st International Conference on Electrical and Electronics Engineering (ICEEE) Pages: 544-548 Published: 2004

ANEXO VI

Libros y/o capítulos de Libro Publicados

1. Tailoring of Contacts on Silicon Carbide: Procedures and Mechanisms ISBN: 978-91-7291-938-9 Sergio Alfonso Pérez García, Parte de la Serie de Publicaciones: Doktorsavhandlingar vid Chalmers TekniskaHögskola Ny Serie nr 2619 ISSN: 0346-718X

2. Thin Film Solar Cell Modeling, Obtaining and Applications; ISBN: 978-953-51-

0969 P.P. Horley, L. Licea Jiménez, S.A. Pérez García, J. Alvarez Quintana, Yu.V. Vorobiev, R. Ramírez Bon, V.P. Makhniy and J. González Hernández; Application of Solar Energy, InTech, 2012, Chapter 4

3. Glass Transition and Water Activity of Model Food Systems Analogous to Fruit

Powder Composition, ISBN: 978-607-95455-4-3 M. A. Ruiz-Cabrera , A. Grajales-Lagunes , M. Moscosa Santillán , M. Z. Saavedra-Leos , R. González-García , M. Abud-Archila , S. A. Pérez-García , A. Toxqui-Terán; Advances in Science, Biotechnology and Safety of Foods, 1, AMECA, 2015, Chapter 23

4. Dispersion of Carbon Nanomaterials; ISBN: 978-0-12-801578-0 M.A. Velasco-

Soto, S.A. Pérez-García, R. Rychwalski, L. Licea-Jiménez; Nanocolloids, ELSEVIER, 2016 , Chapter 7

5. Carbon Polymer Nanocomposites; ISBN: 978-0-12-801578-0 M.A. Velasco-Soto,

J.A. León-Gil, J. Alvarez-Quintana, S.A. Pérez-García, B. Laine,C. Mercader, S. Jestin, R. Rychwalski, L. Licea-Jiménez; Nanocolloids, ELSEVIER, 2016 , Chapter 8

6. Multi-layered solar energy converters with Flexible sequence of p and n

semiconductor films; ISBN: 978-953-51-2840-3 Y.V. Vorobiev, I.R. Chávez Urbiola, R. Ramírez Bon, L. Licea Jiménez, S.A. Pérez García, P. Vorobiev, P. Horley; Sustainable Energy, InTech, 2016, Chapter 6

7. Luminescent Devices Based on Silicon-Rich Dielectric Materials; ISBN: 978 -

953-51-2763-5 Santiago A. Cabañas-Tay, Liliana Palacios-Huerta, Mariano Aceves-Mijares, Antonio Coyopol, Sergio A. Pérez-García, Liliana Licea-Jiménez, Carlos Domínguez and Alfredo Morales-Sánchez; Luminescence - An Outlook on the Phenomena and their Applications, InTech, 2012, Chapter 8

8. Graphene Derivatives: Controlled properties, Nanocomposites & Energy

Harvesting Applications; ISBN: 978-953-51-3139-7 Ulises Méndez Romero, Miguel Angel Velasco Soto, Liliana Licea Jiménez, Jaime Álvarez Quintana and Sergio Alfonso Pérez García Graphene Materials - Structure, Properties and Modifications, InTech, 2016, Chapter 4

ANEXO VII Citas durante el período evaluado. (autocitas no válidas)

Fuente: àISI Web of Science, SCOPUS & Google Académico

ListadeArtículosCitados. TotaldeCitasA=475 TotaldeCitasA+B=518#

Títulodelartículo

Revista

CitasA B

1 Functionalization Effect on Polymer NanocompositeCoatings Based on TiO2-SiO2 Nanoparticles withSuperhydrophilic

NANOMATERIALS2018,Volume:8Issue:6ArticleNumber:369,DOI:https://doi.org/10.3390/nano8060369

2

2 ThermaldecompositionofN-expandedaustenitein304Land904Lsteels

SurfaceEngineering2017,Volume:33Issue:4Pages:319-326DOI:https://doi.org/10.1080/02670844.2016.1262989

3 1

3 Engineered TiO2 and SiO2-TiO2 films on silica-coatedglass for increased thin film durability under abrasiveconditions

INTERNATIONALJOURNALOFAPPLIEDCERAMICTECHNOLOGY2017,Volume:14Issue:1Pages:39-49DOI:https://doi.org/10.1111/ijac.12614

2

4 SynthesisofZn-dopedTiO2nanoparticlesbythenoveloil-in-water(O/W)microemulsionmethodandtheiruseforthephotocatalyticdegradationofphenol

JOURNALOFENVIRONMENTALCHEMICALENGINEERING2015,Volume:3 Issue:4 SpecialIssue:SI Pages:3037-3047 Part:BDOI:https://doi.org/10.1016/j.jece.2015.03.010

7 2

5 Selectivebandgapmanipulationofgrapheneoxidebyitsreductionwithmildreagents

CARBON2015Volume:93(17),967-973DOI:https://doi.org/10.1016/j.carbon.2015.06.013

51

6 Enhanced performance thermal diode via thermalboundaryresistanceatnanoscale

APPLIEDPHYSICSLETTERS2015Volume107Issue8,JournalID:084103DOI:https://doi.org/10.1063/1.4929586

3

7 RF energy scavenging system for DC power from FMbroadcasting based on an optimized Cockcroft–Waltonvoltagemultiplier

Journal of Electromagnetic Waves and Applications. 2015Volume29,Issue11DOI:https://doi.org/10.1080/09205071.2015.1047901

1 1

8 Analysisof the luminescentcenters insiliconrichsiliconnitridelight-emittingcapacitors

SemiconductorScienceandTechnology2015Volume30,Number6 Article ID 065009 DOI:https://doi.org/ 10.1088/0268-1242/30/6/065009

4 1

9 Microstructural, chemical and textural characterizationofZnOnanorodssynthesizedbyaerosolassistedchemicalvapordeposition

MATERIALSCHARACTERIZATION2014Volume:98 Pages:215-221DOI:https://doi.org/10.1016/j.matchar.2014.11.005

20 6

10 Microstructural characterization, optical andphotocatalyticpropertiesofbilayeredCuOandZnObasedthinfilms

Journal of Alloys and Compounds 2014 Volume: 615, Issue: S1,Page:S375-S381DOI:https://doi.org/10.1016/j.jallcom.2014.01.149

5 7

11 Physical properties of inulin and inulin-orange juice:Physicalcharacterizationandtechnologicalapplication

CARBOHYDRATEPOLYMERS2014Volumen:105Páginas:10-19DOI:https://doi.org/10.1016/j.carbpol.2013.12.079

11 5

12 Magnon-mediated thermal rectification with forward-biasandbreakdowntemperatures

JournalofAppliedPhysics2013Volume:114,Issue10Pp104904DOI:https://doi.org/10.1063/1.4820937

2

13 Comprehensive characterization of thermophysicalpropertiesinsolidsusingthermalimpedance

JournalofAppliedPhysics2012Volume:112,Issue:9Pp. 094901DOI:https://doi.org/10.1063/1.4759434

2

14 Glass Transition Study inModel Food Systems PreparedwithMixturesofFructose,Glucose,andSucrose

JournalofFoodScience2012Volume:77,Issue:5Pp.E118-E126DOI:https://doi.org/10.1111/j.1750-3841.2012.02678.x

8 3

Fuente: àISI Web of Science, SCOPUS & Google Académico

# Títulodelartículo Revista Citas

A B15 Towardsanimprovedcalorimetricmethodologyforglass

transition temperature determination in amorphoussugars

CYTA-JournalofFood2012Volume:10Issue:4Pp.258-267DOI:https://doi.org/10.1080/19476337.2011.639960

3 4

16 Inhibition on Carbon Steel Corrosion in Presence ofHydrocarbon

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE2011Volumen:6Número:11Páginas:5134-5145http://www.electrochemsci.org/papers/vol6/6115134.pdf

3

17 Temperature dependent thermal conductivity ofpolycrystallineZnOfilms

JournalofAppliedPhysics2010Volume:107,Issue:6Pp.063713DOI:https://doi.org/10.1063/1.3330755

51 1

18 Microstructural and mechanical characterization of Al-MWCNTcompositesproducedbymechanicalmilling

MATERIALS SCIENCE AND ENGINEERING A2009 Volumen: 502Número:1-2Páginas:159-163DOI:https://doi.org/10.1016/j.msea.2008.10.047

106 4

19 Initial formation of contact layers on Ni/SiC samplesstudiedbyXPS

Surface&InterfaceAnalysis2008Volume:40,Issue:8,Pp.1144DOI:https://doi.org/10.1002/sia.2854

1 1

20 Tailoringofnickelsilicidecontactsonsiliconcarbide AppliedSurfaceScience2007Volume:254,Issue:1,Pp.135-138DOI: https://doi.org/10.1016/j.apsusc.2007.07.055

4

21 InvestigationofNi/Tacontactson4Hsiliconcarbideuponthermalannealing

AppliedSurfaceScience2007Vol:254,Issue:1,Pp.139-142DOI: https://doi.org/10.1016/j.apsusc.2007.07.007

8

22 MWNT reinforced melamine-formaldehyde containing alpha-cellulose

Composites Science and Technology 2007 Volume: 67 Pp.844-854 DOI: https://doi.org/10.1016/j.compscitech.2006.01.031

21

23 InterfacereactionsandelectricalpropertiesofTa/4H-SiCcontacts

MaterialsScienceForum2007Volume:556-557Pages:713DOI: https://doi.org/10.4028/www.scientific.net/MSF.556-557.713

1 1

24 Applicationofangle-resolvedXPS forcharacterisationofSiC/Ni2Sithinfilmsystems

SurfaceandInterfaceAnalysis2006Volume:38Issue:4Pp.859-862DOI: https://doi.org/10.1002/sia.2215

6 1

25 Covalent amino-functionalisation of single-wall carbonnanotubes

Journal of Materials Chemisty 2005 Volume:15 Pp.3334-3339 DOI: https://doi.org/10.1039/b504282h

79

26 PhotovoltaicsolarpanelforahybridPV/thermalsystem Solar Energy Materials and Solar Cells 2004 Volume: 82 Pp.253-261 DOI: https://doi.org/10.1016/j.solmat.2004.01.022

70 3

27 Preparation and characterization of sol-gel silica basedneutralopticaldensitycoatingsbytheadditionofgraphiteparticles

Thin Solid Films 423(2003) 196-200 DOI: https://doi.org/10.1016/S0040-6090(02)01054-4

1 2

TOTALCITAS 475 43

1

CITAS TIPO “A & B”

DR. SERGIO ALFONSO PÉREZ GARCÍA 1.- Functionalization Effect on Polymer Nanocomposite Coatings Based on TiO2-SiO2 Nanoparticles with Superhydrophilic Properties By: Vazquez-Velazquez, AR ; Velasco-Soto, MA ; Perez-Garcia, SA ; Licea-Jimenez, L NANOMATERIALS Volume: 8 Issue: 6 Article Number: 369, Published: JUN 2018 DOI: https://doi.org/10.3390/nano8060369 CITAS A

1. F. Sbardella, L. Pronti, M.L. Santarelli, J.M. Asua Gonzàlez and M. P. Bracciale Waterborne Acrylate-Based Hybrid Coatings with Enhanced Resistance Properties on Stone Surfaces COATINGS (2018) Volume: 8, Issue: 8, Article Number: 283 DOI: https://doi.org/ 10.3390/coatings8080283

2. D. Meroni, S. Ardizzone, Preparation and Application of Hybrid Nanomaterials NANOMATERIALS

(2018) Volume: 8, Issue: 11, Article Number: 891 DOI: https://doi.org/10.3390/nano8110891

2.- Thermal decomposition of N-expanded austenite in 304L and 904L steels By: Maistro, G.; Perez-Garcia, S. A.; Norell, M.; et al. SURFACE ENGINEERING Volume: 33 Issue: 4 Pages: 319-326 Published: 2017 DOI: https://doi.org/10.1080/02670844.2016.1262989 CITAS A

3. V Belozerov, A Mahatilova, O Sobol’, V Subbotina, A Subbotin Investigation Of The Influence Of Technological Conditions Of Microarc Oxidation Of Magnesium Alloys On Their Structural State And Mechanical Properties EASTERN-EUROPEAN JOURNAL OF ENTERPRISE TECHNOLOGIES : Applied Physics ISSN 1729-3774, (2017), Volume: 86 Issue: 2/5 Pages: 39-43 DOI: https://doi.org/10.15587/1729-4061.2017.96721

4. A. Andreev, O. Sobol', S. Shevchenko, V. Stolbovoy, V. Aleksandrov, D. Kovteba, A. Terletsky, T. Protasenko

Results of approbation of the innovative method of ion nitriding for steels with low temperatures of tempering EASTERN-EUROPEAN JOURNAL OF ENTERPRISE TECHNOLOGIES : Applied Physics ISSN 1729-3774, (2017), Volume: 87 Issue: 3/5 Pages: 31-36 DOI: https://doi.org/10.15587/1729-4061.2017.10417

5. M. Isupov, V. Pinaev, D. Mul, N. Belousova Plasma-Assisted Nitriding in Low-Frequency Inductively Coupled Plasma Enhanced with Ferromagnetic Cores De Gruyter High Temp. Mater. Proc. 2018; 37(6): 545–550 https://doi.org/10.1515/htmp-2016-0233

CITAS B

[1] Gluszek, Malgorzata; Kubis, Michal; Zurowski, Radoslaw; et al. Enhancement of thermo-rheological properties of smart materials based on SiO2 and PPG modificated with expanded graphite INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, (2018), Volume: 15 Issue: 2 Pages: 538-545 DOI: https://doi.org/10.1111/ijac.12808

3.- Engineered TiO2 and SiO2-TiO2 films on silica-coated glass for increased thin film durability under abrasive conditions By: Elena Ramirez-Garcia, Rosa; Alfonso Perez-Garcia, Sergio Alfonso; Alberto Gonzalez-Rodriguez, Jesus; et al. INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY Volume: 14 Issue: 1 Pages: 39-49 JAN-FEB 2017 https://doi.org/10.1111/ijac.12614

2

CITAS A

6. Gluszek, Malgorzata; Kubis, Michal; Zurowski, Radoslaw; et al. Enhancement of thermo-rheological properties of smart materials based on SiO2 and PPG modificated with expanded graphite INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, (2018), Volume: 15 Issue: 2 Pages: 538-545 DOI: https://doi.org/10.1111/ijac.12808

7. B. M. Pratima, , K.Valleti, A. Subrahmanyam Optical and mechanical properties of Sol-gel prepared Titania (TiO2)-Silica (SiO2) mixed thin films 'as prepared at 300 K' without any post heat treatment MATERIALS RESEARCH EXPRESS (2019) Volume: 6, Issue: 2, Article Number: 026407 DOI: https://doi.org/10.1088/2053-1591/aaecbf

4.- Synthesis of Zn-doped TiO2 nanoparticles by the novel oil-in-water (O/W) microemulsion method and their use for the photocatalytic degradation of phenol By: Sanchez-Dominguez, Margarita; Morales-Mendoza, Getsemani; Rodriguez-Vargas, Maria J.; et al. JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING Volume: 3 Issue: 4 Special Issue: SI Pages: 3037-3047 Part: B Published: DEC 2015 DOI: https://doi.org/10.1016/j.jece.2015.03.010 CITAS A

8. Nasseri, Simin; Borna, Mohammad Omidvar; Esrafili, Ali; et al. Photocatalytic degradation of malathion using Zn2+-doped TiO2 nanoparticles: statistical analysis and optimization of operating parameters APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2018) Volume: 124 Issue: 2 Article Number: 175 Published: DOI: https://doi.org/10.1007/s00339-018-1599-0

9. Rao, A.; Pundir, V. S.; Tiwari, A.; et al. Investigating the effect of dopant type and concentration on TiO2

powder microstructure via rietveld analysis JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2018) Volume: 113 Pages: 164-176 DOI: https://doi.org/10.1016/j.jpcs.2017.10.030

10. Fanun, Monzer Book: Particle Size Chapter: SUGAR ESTERS MICROEMULSIONS (2017) Pages: 271-

291 DOI: https://doi.org/10.1016/B978-0-12-811653-1.00006-8

11. Ma, Xiaoyu; Chen, Yaying; Qian, Jiangchao; et al. Controllable synthesis of spherical hydroxyapatite

nanoparticles using inverse microemulsion method MATERIALS CHEMISTRY AND PHYSICS (2016) Volume: 183 Pages: 220-229 DOI: https://doi.org/10.1016/j.matchemphys.2016.08.021

12. Aware, Dinkar V.; Jadhav, Shridhar S. Synthesis, characterization and photocatalytic applications of

Zn-doped TiO2 nanoparticles by sol-gel method APPLIED NANOSCIENCE (2016) Volume: 6 Issue: 7 Pages: 965-972 DOI: https://doi.org/10.1007/s13204-015-0513-8

13. Mahy, Julien G.; Lambert, Stephanie D.; Leonard, Geraldine L. -M.; et al Towards a large scale aqueous

sol-gel synthesis of doped TiO2: Study of various metallic dopings for the photocatalytic degradation of p-nitrophenol JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2016) Volume: 329 Pages: 189-202 DOI: https://doi.org/10.1016/j.jphotochem.2016.06.029

14. Léa Elias Mendes Carneiro Zaida, Renata Vitória de Lima Sales, Júlia Barbosa de Almeida Salgado, Ana

Maria Ribeiro Bastos da Silva, Daniella Carla Napoleão, Joan Manuel Rodríguez-Díaz, Olga Martins Marques, Mohand Benachour, Valdinete Lins da Silva Photodegradation applied to the treatment of phenol and derived substances catalyzed by TiO2/BiPO4 and biological toxicity analysis. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH, (2017) , 7 (24) pp. 6002-6012 DOI: https://doi.org/10.1007/s11356-015-5952-y

CITAS B

3

[2] Boutonnet, Magali; Sanchez-Dominguez, Margarita Microemulsion droplets to catalytically active

nanoparticles. How the application of colloidal tools in catalysis aims to well designed and efficient catalysts CATALYSIS TODAY (2017) Volume: 285 Pages: 89-103, DOI: https://doi.org/10.1016/j.cattod.2016.12.047

[3] Adrian Rodriguez-Rodriguez, Arturo; Martinez-Montemayor, Sagrario; Cutberto Leyva-Porras, Cesar; et al.

CoFe2O4-TiO2 Hybrid Nanomaterials: Synthesis Approaches Based on the Oil-in-Water Microemulsion Reaction Method JOURNAL OF NANOMATERIALS (2017) Article Number: 2367856 DOI: https://doi.org/10.1155/2017/2367856

5.- Selective band gap manipulation of graphene oxide by its reduction with mild reagents By: Velasco-Soto, M. A.; Perez-Garcia, S. A.; Alvarez-Quintana, J.; Licea-Jimenez, L. CARBON Volume: 93 Pages: 967-973 Published: NOV 2015 DOI: https://doi.org/10.1016/j.carbon.2015.06.013 CITAS A

15. A. H. Abdullah, Z. Ismail, A. S. Zainal Abidin, K. Yusoh Green sonochemical synthesis of few-layer graphene in instant coffee Materials Chemistry and Physics (2019) Volume: 222 Pages: 11-19 DOI: https://doi.org/10.1016/j.matchemphys.2018.09.085

16. C. Aydin Synthesis of SnO2:rGO nanocomposites by the microwave-assisted hydrothermal method

and change of the morphology, structural, optical and electrical properties Journal Of Alloys And Compounds (2019) Volume: 771 Pages: 964-972 DOI: https://doi.org/10.1016/j.jallcom.2018.08.298

17. Q.A.Drmosh, Z.H.Yamani, A.H.Hendi, M.A.Gondal, R.A.Moqbel, T.A.Saleh, M.Y.Khan A novel approach to

fabricating a ternary rGO/ZnO/Pt system for high-performance hydrogen sensor at low operating temperatures Applied Surface Science (2019) Volume: 464 Pages: 616-626 DOI: https://doi.org/10.1016/j.apsusc.2018.09.128

18. Z. Wan, S. Wang, B. Haylock, J. Kaur, P. Tanner, D. Thiel, R. Sang, I. S. Cole, X. Li, M. Lobino, Q. Li Tuning

the sub-processes in laser reduction of graphene oxide by adjusting the power and scanning speed of laser Carbon (2019) Volume: 141 Pages: 83-91 DOI: https://doi.org/10.1016/j.carbon.2018.09.030

19. G. Lee, D. W. Jung, W. Lee, S. Nah, S. Ji, J. Y. Hwang, S. S. Lee, S. Park, S. S. Chae, J. O Lee Solution-

processable method for producing high-quality reduced graphene oxide displaying 'self-catalytic healing Carbon (2019) Volume: 141 Pages: 774-781 DOI: https://doi.org/10.1016/j.carbon.2018.09.038

20. H. Ahmad, T. M.K. Tamil, Enhancement of broadband ultraviolet visible photodetection by boron nitride nanoparticles in bulk graphene oxide layer Optical Materials (2018) Volume: 86, Pages: 18-23 DOI: https://doi.org/10.1016/j.optmat.2018.09.033

21. B. Borah, G. Rajitha, R. K.Dash, Correlation between the thickness and properties of the ethanol treated

GO-PDMS based composite materials Journal Of Materials Science: Materials In Electronics (2018) Volume: 29, Issue: 23 Pages: 20216-20224 DOI: https://doi.org/10.1007/s10854-018-0154-2

22. M. A. Perez-Guzman, R. Ortega-Amaya, Y. Matsumoto, A.M. Espinoza-Rivas, J. Morales-Corona, J.

Santoyo-Salazar, M. Ortega-López, Growth and Self-Assembly of Silicon-Silicon Carbide Nanoparticles into Hybrid Worm-Like Nanostructures at the Silicon Wafer Surface Nanomaterials (2018) Volume: 8, Issue: 11, Article Number: 954 DOI: https://doi.org/ 10.3390/nano8110954

23. S. Y, Gu, C.T. Hsieh,T. W. Lin, J. K. Chang, J. Li, Y. A. Andomi Tuning oxidation level, electrical conductance and band gap structure on graphene sheets by a cyclic atomic layer reduction technique Carbon (2018) Volume: 137, Pages: 234-241 DOI: https://doi.org/10.1016/j.carbon.2018.05.024

4

24. H. Aguilar-Bolados, A. Contreras-Cid, M. Yazdani-Pedram, Synthesis of fluorinated graphene oxide by

using an easy one-pot deoxyfluorination reaction Journal Of Colloid And Interface Science (2018) Volume: 524 Pages: 219-226 DOI: https://doi.org/10.1016/j.jcis.2018.04.030

25. K. K. H.De Silva, H. H. Huang, M. Yoshimura, Progress of reduction of graphene oxide by ascorbic acid

Applied Surface Science (2018) Volume: 447 Issue 31 Pages: 338-346 DOI: https://doi.org/10.1016/j.apsusc.2018.03.243

26. S. Azizighannad & S. Mitra Stepwise Reduction of Graphene Oxide (GO) and Its Effects on Chemical

and Colloidal Properties SCIENTIFIC REPORTS (2018) Volume: 8, Article Number: 10083 DOI: https://doi.org/10.1038/s41598-018-28353-6

27. O. Gullu, M. Cankaya, Morphological, Structural and Optical Characteristics of Graphene Oxide Layers

and Metal/Interlayer/Semiconductor Photovoltaic Diode Application Journal Of Ovonic Research (2018) Volume: 14 Issue: 2 Pages: 129-144

28. N. Shehzad, K. Johari, T. Murugesan, and M. Tahir Graphene Oxide as An Efficient Photocatalyst For

Photocatalytic Reduction of CO2 Into Solar Fuel INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING (2018) Volume: 15, Issue: 1, Pages: 4909-4918 DOI: https://doi.org/10.15282/ijame.15.1.2018.3.0382

29. Kaur, A., Kaur, J., & Singh, R. C. Tailor made exfoliated reduced graphene oxide nanosheets based on

oxidative-exfoliation approach. FULLERENES, NANOTUBES AND CARBON NANOSTRUCTURES, (2018) 26(1), 1-11 DOI: https://doi.org/10.1080/1536383X.2017.1390454.

30. M. F. Zainuddin, N. N. H. Raikhan, N. H. Othman, Synthesis of reduced Graphene Oxide (rGO) using different treatments of Graphene Oxide (GO) Conference: 3rd International Conference on Global Sustainability and Chemical Engineering (ICGSCE) Location: Putrajaya, MALAYSIA Date: FEB 15-16, 2017 Sponsor(s): Univ Teknologi MARA, Fac Chem Engn 3RD INTERNATIONAL CONFERENCE ON GLOBAL SUSTAINABILITY AND CHEMICAL ENGINEERING (ICGSCE) Book Series: IOP Conference Series-Materials Science and Engineering (2018) Volume: 358 Article Number: UNSP 012046

31. Chiu, N. F., Yang, C. D., Chen, C. C., & Kuo, C. T. Stepwise control of reduction of graphene oxide and quantitative real-time evaluation of residual oxygen content using EC-SPR for a label-free electrochemical immunosensor. SENSORS AND ACTUATORS B: CHEMICAL, (2018) 258, Pp.981-990. DOI: https://doi.org/10.1016/j.snb.2017.11.187

32. Abdolhosseinzadeh, S., Sadighikia, S., Gursel, SA. Scalable Synthesis of Sub-Nanosized Platinum-

Reduced Graphene Oxide Composite by an Ultraprecise Photocatalytic Method ACS SUSTAINABLE CHEMISTRY & ENGINEERING, (2018) 6, pp. 3773-3782. DOI: https://doi.org/ 10.1021/acssuschemeng.7b04148

33. Evingur, GA., Pekcan, O. Optical energy band gap of PAAm-GO composites COMPOSITE

STRUCTURES, (2018) 183, pp. 212-215. DOI: https://doi.org/10.1016/j.compstruct.2017.02.058

34. Sukumaran, S. S., Jinesh, K. B., & Gopchandran, K. G. Liquid phase exfoliated graphene for electronic

applications. MATERIALS RESEARCH EXPRESS, (2017). 4 (9), pp.095017. DOI: https://doi.org/10.1088/2053-1591/aa8586

35. Queralto, A., del Pino, AP., Logofatu, C., Datcu, A., Amade, R., Alshaikh, I., Bertran, E., Urzica, I., Gyrogy,

E. MAPLE Synthesis of reduced graphene oxide/silver nanocomposite electrodes: Influence of target composition and gas ambience JOURNAL OF ALLOYS AND COMPOUNDS, (2017) 76, pp. 1003-1013. DOI: https://doi.org/10.1016/j.jallcom.2017.08.052

36. Ahmad, H., Thandavan, TMK. Characterization of graphene oxide/silicon dioxide/p-type silicon

heterojunction photodetector towards infrared 974 nm illumination OPTICAL AND QUANTUM ELECTRONICS, (2017) 49, Article Number 395. DOI: https://doi.org/10.1007/s11082-017-1218-x

5

37. Chamoli, P., Das, MK., Kar, KK. Structural, optical, and electrical characteristics of graphene

nanosheets synthesized from microwave-assisted exfoliated graphite JOURNAL OF APPLIED PHYSICS, (2017) 122, Article Number 185105. DOI: https://doi.org/10.1063/1.4991577

38. Shaban, M., Rabia, M., Abd El-Sayed, AM., Ahemd, A., Sayed, S. Photocatalytic properties of

PbS/graphene oxide/polyaniline electrode for hydrogen generation SCIENTIFIC REPORTS, (2017) 7, Article Number 14100. DOI: https://doi.org/10.1038/s41598-017-14582-8

39. Luo, HN., Auchterlonie, G., Zou, J. A thermodynamic structural model of graphene oxide JOURNAL OF

APPLIED PHYSICS, (2017) 122, Article Number 145101. DOI: https://doi.org/10.1063/1.4991967

40. Aguilar-Bolados, H., Vargas-Astudillo, D., Yazdani-Pedram, M., Acosta-Villavicencio, G., Fuentealba, P.,

Contreras-Cid, A., Verdejo, R., Lopez-Manchado, MA. Facile and Scalable One-Step Method for Amination of Graphene Using Leuckart Reaction CHEMISTRY OF MATERIALS, (2017) 29, pp. 6698-6705. DOI: https://doi.org/10.1021/acs.chemmater.7b01438

41. Luo, Haining. A theoretical study of graphene oxide chemical structure MPHIL THESIS, SCHOOL OF

MECHANICAL AND MINING ENGINEERING, THE UNIVERSITY OF QUEENSLAND. (2017). doi: https://doi.org/10.14264/uql.2017.940

42. V. Sydorchuk, V & Khalameida, Svitlana & I. Poddubnaya, O & M. Tsyba, M & Puziy, Alexander. Cation-

containing active carbons as photocatalysts for dyes degradation. HIMIA, FIZIKA TA TEHNOLOGIA POVERHNI. (2017). 8. Pp. 422-431.

43. Kumar R, Avasthi DK, Kaur A, Fabrication of chemiresistive gas sensors based on multistep reduced

graphene oxide for low parts per million monitoring of sulfur dioxide at room temperature. SENSORS AND ACTUATORS B: CHEMICAL (2017) 242 Pp. 461-468 DOI: https://doi.org/10.1016/j.snb.2016.11.018

44. De Silva KKH, Huang HH, Joshi RK, Yoshimura M, Chemical reduction of graphene oxide using green

reductants. CARBON (2017) 119 Pp. 190-199 . DOI: https://doi.org/10.1016/j.carbon.2017.04.025

45. Nasr M, Balme S, Eld C, Habchi R, Miele P, Bechelany M, Enhanced Visible-Light Photocatalytic

Performance of Electrospun rGO/TiO2 Composite Nanofibers. THE JOURNAL OF PHYSICAL CHEMISTRY C, (2017), 121 (1), pp 261–269 DOI: https://doi.org/10.1021/acs.jpcc.6b08840

46. Chen, JX., Zhao, DL., Yao, RR., Li, C., Wang, XJ., Sun, FF. Hedgehog-like CuO/nitrogen-doped graphene

nanocomposite for high-performance lithium-ion battery anodes JOURNAL OF ALLOYS AND COMPOUNDS, (2017) 714, pp. 419-424. DOI: https://doi.org/10.1016/j.jallcom.2017.04.171

47. Hasan, MT., Senger, BJ., Ryan, C., Culp, M., González-Rodríguez, R., Coffer JL., Naumov, AV. Optical

Band Gap Altertion of Graphene Oxide via Ozone Treatment SCIENTIFIC REPORTS, (2017) 7, Article Number 6411. DOI: https://doi.org/10.1038/s41598-017-06107-0

48. Zaharie-Butucel, D., Potara, M., Craciun, AM., Boukherroub, R., Szunerits, S., Astilean, S. Revealing the structure and functionality of graphene oxide and reduced graphene oxide/pyrene carboxylic acid interfaces by correlative spectral and imaging analysis PHYSICAL CHEMISTRY CHEMICAL PHYSISCS, (2017) 19, pp. 16038-16046. DOI: https://doi.org/10.1039/c7cp02443f

49. Zerjav, G., Arshad, MS., Djinovic, P., Junkar, I., Kovac, J., Zavasnik, J., Pintar, A. Improved electron-hole

separation and migration in anatase TiO2 nanorod/reduced graphene oxide composites and their influence on photocatalytic performance NANOSCALE, (2017) 9, pp. 4578-4592. DOI: https://doi.org/10.1039/c7nr00704c

50. Sivalingam, MM., Balasubramanian, K. Influence of the concentration of reducing agent on gold nanoparticles decorated reduced graphene oxide and its ammonia sensing performance APPLIED

6

PHYSICS A-MATERIALS SCIENCE & PROCESSING, (2017) 123, Article Number 281. DOI: https://doi.org/10.1007/s00339-017-0910-9

51. Hong, Y., Zhu, CQ., Ju, MG., Zhang, JC., Zeng, XC. Lateral and flexural phonon thermal transport in

graphene and stanene bilayers PHYSICAL CHEMISTRY CHEMICAL PHYSICS, (2017) 19, pp. 6554-6562. DOI: https://doi.org/10.1039/c6cp08276a

52. Hasan, MT., Senger, BJ., Mulford, P., Ryan, C., Doan, H., Gryczynski, Z., Naumov, AV., Modifying optical properties of reduced/graphene oxide with controlled ozone and thermal treatment in aqueous suspensions NANOTECNHNOLOGY, (2017) 28, Article Number 065705. DOI: https://doi.org/10.1088/1361-6528/aa5232

53. Low, FW., Lai, CW., Abd Hamid, SB. Study of reduced graphene oxide film incorporated of TiO2 species for efficient visible light driven dye-sensitized solar cell JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, (2017) 28, pp. 3819-3836. DOI: https://doi.org/10.1007/s10854-016-5993-0

54. Hidayah, NMS., Liu, WW., Lai, CW., Noriman, Z., Khe, CS., Hashim, U., Lee, HC. Comparison on Graphite,

Graphene Oxide and Reduced Graphene Oxide: Synthesis and Characterization. Edited by: Aziz, HA., AbuBakar, BH., Johari, MAM., Keong, CK., Yusoff, MS., Hasan, MRM., Ramli, MH., Halim, H. PROCEEDINGS OF THE INTERNATIONAL CONFERENCE OF GLOBAL NETWORK FOR INNOVATIVE TECHNOLOGY AND AWAM INTERNATIONAL CONFERENCE IN CIVIL ENGINEERING (IGNITE-AICCE'17): SUSTAINABLE TECHNOLOGY AND PRACTICE FOR INFRASTRUCTURE AND COMMUNITY RESILIENCE, BOOK SERIES: AIP CONFERENCE PROCEEDINGS, 1892, (2017)Article Number: UNSP 150002-1. DOI: https://doi.org/10.1063/1.5005764

55. Gupta, V., Sharma, N., Singh, U., Arif, M., & Singh, A. Higher oxidation level in graphene oxide. OPTIK - INTERNATIONAL JOURNAL FOR LIGHT AND ELECTRON OPTICS, (2017). 143, pp. 115-124. DOI: https://doi.org/10.1016/j.ijleo.2017.05.100

56. Bazargan, AM., Sharif, F., Mazinani, S., Naderi, N. Highly conductive reduced graphene oxide transparent ultrathin film through joule-heat induced direct reduction JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, (2017) 28, pp. 1419-1427. DOI: https://doi.org/10.1007/s10854-016-5676-x

57. Perez-Martinez, P., Galvan-Miyoshi, J. M., Ortiz-Lopez, J. Ultrasonic cavitation effects on the structure of graphene oxide in aqueous suspensión JOURNAL OF MATERIALS SCIENCE, (2016) 51, pp. 10782-10792. DOI: https://doi.org/10.1007/s10853-016-0290-0

58. Ortega-Amaya, R.,Matsumoto, Y., Flores-Conde, A, Pérez-Guzmán, MA., Ortega-López, M. In situ formation of rGO quantum dots during GO reduction via interaction with citric acid in aqueous medium MATERIALS RESEARCH EXPRESS, (2016) 3, Article Number 105601. DOI: https://doi.org/10.1088/2053-1591/3/10/105601

59. Kumar, R., Dhawan, S. K., Singh, H. K, Kaur, A. Charge transport mechanism of thermally reduced graphene oxide and their fabrication for high performance shield against electromagnetic pollution MATERIALS CHEMISTRY AND PHYSICS, (2016)180, pp. 413-421. DOI: https://doi.org/10.1016/j.matchemphys.2016.06.025

60. Sohrabi, S., Dehghanpour, S., Ghalkhani, M. Three-Dimensional Metal-Organic Framework Graphene

Nanocomposite as a Highly Efficient and Stable Electrocatalyst for the Oxygen Reduction Reaction in Acidic Media CHEMCATCHEM, 8, (2016) pp. 2356-2366. DOI: https://doi.org/10.1002/cctc.201600298

61. Adelifard, M., Darudi, H. A facile fabrication of chemically converted graphene oxide thin films and their uses as absorber materials for solar cells APPLIED PHYSICS A-MATERIALS SCIENCE &PROCESSING, (2016) 122, Article Number 628. DOI: https://doi.org/10.1007/s00339-016-0216-3

7

62. Wang, W., He, Mingyi., Zhang, H., Dai, YT. Preparation of Reduced Graphene Oxide/Ultrathin BiOCl Nanosheet Composites with Enhanced Electrochemical Behavior and Photocatalytic Performance International Journal of Electrochemical Science, (2016) 11, pp. 1831-1839.

63. Chettri, P., Vendamani, V. S., Tripathi, A., Pathak, AP., Tiwari, A. Self assembly of functionalised graphene nanostructures by one step reduction of graphene oxide using aqueous extract of Artemisia vulgaris APPLIED SURFACE SCIENCE, (2016) 362, pp. 221-229. DOI: https://doi.org/10.1016/j.apsusc.2015.11.231

64. Rathi, N., Rathi, S., Lee, I., Wang, JW., Kang, M., Lim, D., Khan, MA., Lee, Y., Kim, GH. Reduction of persistent photoconductivity in a few-layer MoS2 field-effect transistor by graphene oxide functionalization RSC ADVANCES, (2016) 6, pp. 23961-23967.DOI: https://doi.org/10.1039/c6ra03436e

6.- Enhanced performance thermal diode via thermal boundary resistance at nanoscale By: M Tovar-Padilla, L Licea-Jimenez, SA Pérez-Garcia, J Alvarez-Quintana APPLIED PHYSICS LETTERS Volume 107 Issue 8, Journal ID: 084103 Published: 2015 DOI: https://doi.org/10.1063/1.4929586 CITAS A

65. Frantziskonis GN, Gur S, Computational simulations for the development of novel solid-state smart NiTi-Al thermal diodes JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2017) Volume: 28 issue: 15, page(s): 2082-2094 DOI: https://doi.org/ 10.1177/1045389X16685440

66. Liu X, Shen J, Xuan Y, Pattern-free thermal modulator via thermal radiation between Van der Waals

materials JOURNAL OF QUANTITATIVE SPECTROSCOPY AND RADIATIVE TRANSFER , (2017), Volume: 200 Issue: October Pages: 100-107 DOI: https://doi.org/ 10.1016/j.jqsrt.2017.06.010

67. Hardt S, Free-molecule heat transfer in a conservative force field between parallel surfaces.

PHYSICAL REVIEW E, (2016) Volume: 93 Issue: 5 Article ID 052139 DOI: https://doi.org/10.1103/PhysRevE.93.052139

7.- RF energy scavenging system for DC power from FM broadcasting based on an optimized Cockcroft–Walton voltage multiplier By: Leon-Gil JA, Perales-Cruz JC, Licea-Jimenez L, Pérez Garcia SA, Alvarez-Quintana J. Journal of Electromagnetic Waves and Applications. Volume 29, Issue 11 Published : 2015 DOI: https://doi.org/10.1080/09205071.2015.1047901 CITAS A

68. John T.C. St.,Marinelli; Z.J., Kaczmar J.M., Given R.P., Wenger K.S., Utter B.C.; Scarel G., Conversion of infrared light into usable energy Proceedings Volume 9927, Nanoengineering: Fabrication, Properties, Optics, and Devices XIII; 99270C (2016); doi: https://doi.org/10.1117/12.2236971

CITAS B

[4] Leon-Gil J.A., Cortes-Loredo A., Fabian-Mijangos A., Martinez-Flores J.J., Tovar-Padilla M., Cardona-Castro M.A., Morales-Sánchez A. and Alvarez-Quintana J. Medium and Short Wave RF Energy Harvester for Powering Wireless Sensor Networks SENSORS (2018) Volume: 18 ISsue: 3, Pp. 768; DOI: https://doi.org/10.3390/s18030768

8

8.- Analysis of the luminescent centers in silicon rich silicon nitride light-emitting capacitors By: Cabañas-Tay SA, Palacios-Huerta L, Luna-López JA, Aceves-Mijares M, Alcántara-Iniesta S, Pérez-García SA, Morales-Sánchez A SEMICONDUCTOR SCIENCE AND TECHNOLOGY Volume:30 issue: 6, Article ID 065009 Published: 2015 CITAS A

69. Fu SW, Chen HJ, Wu HT, Chen SP, Shih CF, Enhancing the electroluminescence efficiency of Si NC/SiO2 superlattice-based light-emitting diodes through hydrogen ion beam treatment NANOSCALE (2016) Volume: 13 Issue: 8 pp. 7155-7162 ; DOI: https://doi.org/10.1039/C5NR08470A

70. Grigaitis T., Naujokaitis A., Sabonis V., Arlauskas K., Electroluminescence from SiNx layers doped with Ce3 + ions. THIN SOLID FILMS (2017) Volume:622 Issue: 2 Pp.142-147 DOI: https://doi.org/10.1016/j.tsf.2016.12.029

71. Muñoz-Rosas AL, Rodríguez-Gómez A, Alonso-Huitrón JC, Enhanced Electroluminescence from Silicon

Quantum Dots Embedded in Silicon Nitride Thin Films Coupled with Gold Nanoparticles in Light Emitting Devices, NANOMATERIALS (2018) Volume: 8, Issue: 4, Pp. 182 DOI: https://doi.org/10.3390/nano8040182

72. A. L. Munoz-Rosas, A. Rodriguez-Gomez, J. C. Alonso-Huitron, Enhanced Electroluminescence from Silicon Quantum Dots Embedded in Silicon Nitride Thin Films Coupled with Gold Nanoparticles in Light Emitting Devices NANOMATERIALS (2018) Volume: 8, Issue: 4, Article Number: 182 DOI: https://doi.org/10.3390/nano8040182

CITAS B

[5] Cabañas-Tay S.A., Morales-Sánchez A., Palacios-Huerta L., Aceves-Mijares M., UV electroluminescence from ITO/SRO/p-Si and ITO/SRN/SRO/p-Si structures 2016 13th International Conference on Electrical Engineering, Computing Science and Automatic Control (CCE) (2016) Pp. 1-5; DOI: https://doi.org/10.1109/ICEEE.2016.7751235

9.- Microstructural, chemical and textural characterization of ZnO nanorods synthesized by aerosol assisted chemical vapor deposition By: Saenz-Trevizo A., Amezaga-Madrid P., Fuentes-Cobas L., Piza-Ruiz P., Antunez-Flores W., Ornelas-Gutierrez C., Perez-Garcia S.A., Miki-Yoshida M. MATERIALS CHARACTERIZATION Volume: 98 Pp.: 215-221 Published: 2014 DOI: https://doi.org/10.1016/j.matchar.2014.11.005 CITAS A

73. Larianovsky, Natalya; Popov, Vladimir; Katz-Demyanetz, Alexander; et al. Production of Al Metal Matrix Composites Reinforced With Carbon Nanotubes by Two-Stage Melt-Based HPDC-CE Method Journal of Engineering Materials and Technology-Transactions of The Asme (2019) Volume: 141 Issue: 1 Article Number: 011002 DOI: https://doi.org/10.1115/1.4040556

74. Sahoo, Baidehish; Joseph, Jomy; Sharma, Abhishek; et al Particle size and shape effects on the surface

mechanical properties of aluminium coated with carbonaceous materials Journal of Composite Materials (2019) Volume: 53 Issue: 2 Pages: 261-270 DOI: https://doi.org/10.1177/0021998318781932

75. Saboori, Abdollah; Pavese, Matteo; Badini, Claudio; et al. A Novel Approach to Enhance the Mechanical

Strength and Electrical and Thermal Conductivity of Cu-GNP Nanocomposites Metallurgical and

9

Materials Transactions A-Physical Metallurgy and Materials Science (2018) Volume: 49A Issue: 1 Pages: 333-345 DOI: https://doi.org/10.1007/s11661-017-4409-y

76. Shin, S. E.; Bae, D. H. Fatigue behavior of Al2024 alloy-matrix nanocomposites reinforced with multi-

walled carbon nanotubes Composites Part B-Engineering Volume: 134 Pages: 61-68 DOI: https://doi.org/10.1016/j.compositesb.2017.09.034

77. Chen, Malin; Fan, Genlian; Tan, Zhanqiu; et al. Design of an efficient flake powder metallurgy route to

fabricate CNT/6061Al composites Materials & Design (2018) Volume: 142 Pages: 288-296 DOI: https://doi.org/10.1016/j.matdes.2018.01.044

78. Hassanzadeh-Aghdam, M. K.; Ansari, R.; Mahmoodi, M. J. Micromechanical estimation of biaxial

thermomechanical responses of hybrid fiber-reinforced metal matrix nanocomposites containing carbon nanotubes Mechanics of Materials (2018) Volume: 119 Pages: 1-15 DOI: https://doi.org/10.1016/j.mechmat.2018.01.002

79. Hassanzadeh-Aghdam, Mohammad Kazem; Ansari, Reza; Mahmoodi, Mohammad Javad Thermal

expanding behavior of carbon nanotube-reinforced metal matrix nanocomposites-A micromechanical modelling Journal of Alloys and Compounds (2018) Volume: 744 Pages: 637-650 DOI: https://doi.org/10.1016/j.jallcom.2018.02.100

80. A. Saboori, M. Dadkhah, P Fino and M. Pavese An Overview of Metal Matrix Nanocomposites

Reinforced with Graphene Nanoplatelets; Mechanical, Electrical and Thermophysical Properties Metals (2018) Volume: 8 Issue: 6 Article Number: 423 DOI: https://doi.org/10.3390/met8060423

81. O. Sizonenko, S. Prokhorenko, A. Torpakov, et al. The metal-matrix composites reinforced by the

fullerenes AIP Advances (2018) Volume: 8 Issue: 8 Article Number: 085317 DOI: https://doi.org/10.1063/1.5031195

82. M. Mansoor, M. Shahid, Stress relaxation behavior of annealed aluminum-carbon nanotube composite

Science And Engineering of Composite Materials (2018) Volume: 25 Issue: 5 Pages: 1015-1019 DOI: https://doi.org/10.1515/secm-2015-0493

83. S. Alanka, C. Ratnam, B. S. Prasad, An effective approach to synthesize carbon nanotube-reinforced

Al matrix composite precursor Science And Engineering Of Composite Materials (2018) Volume: 25 Issue: 5 Pages: 983-991 DOI: https://doi.org/10.1515/secm-2017-0229

84. L. Kumar Singh, A. Bhadauria, S.Jana, T. Laha Effect of Sintering Temperature and Heating Rate on

Crystallite Size, Densification Behaviour and Mechanical Properties of Al-MWCNT Nanocomposite Consolidated via Spark Plasma Sintering Acta Metallurgica Sinica-English Letters (2018) Volume: 31 Issue:10 Pages: 1019-1030 DOI: https://doi.org/10.1007/s40195-018-0795-4

85. B. Guo, X. Zhang, X. Cen, et al. Enhanced mechanical properties of aluminum based composites

reinforced by chemically oxidized carbon nanotubes CARBON (2018) Volume: 139, Pages: 459-471 DOI: https://doi.org/10.1016/j.carbon.2018.07.026

86. S-Y Lee, S.E. Shin, Y. Sun, H. Fujii, Y. Park Friction stir welding of multi-walled carbon nanotubes

reinforced Al matrix composites Materials Characterization (2018) Volume: 145, Pages: 653-663 DOI: https://doi.org/10.1016/j.matchar.2018.09.033

87. O. Velgosova, M. Besterci, B. Ballokova, Influence of Al4C3 nanophase on structural stability and

mechanical properties of Al-Al4C3 composites after thermal exposure Metallurgical Research & Technology (2018) Volume: 115 Issue: 6 Article Number: 606 DOI: https://doi.org/10.1051/metal/2018022

88. D. C. Burciaga-Valencia, E. E. Villalobos-Portillo, J. A. Marin-Romero, Recent developments in the texture

analysis program ANAELU Conference: 26th International Materials Research Congress (IMRC) Location: Cancun, MEXICO Date: AUG 20-25, 2017 Sponsor(s): Soc Mexicana Mat; Mat Res Soc JOURNAL OF

10

MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018) Volume: 29 Issue: 18 Special Issue: SI Pages: 15376-15382

89. Narula C., Chauhan R.P., Size dependent properties of one dimensional CdSe micro/nanostructures. Physica B: Condensed Matter. (2017) Volume: 521, Pp. 381-388 DOI: https://doi.org/10.1016/j.physb.2017.07.029

90. Wang, Y., Peng, Z.J., Wang, Q., Fu, X.L., Tunable electrical resistivity of oxygen-deficient zinc oxide

thin films. SURFACE ENGINEERING (2017) Volume: 33, Issue: 3 Pp. 217-225 DOI: https://doi.org/10.1080/02670844.2016.1212519

91. Vallejos S., Pizúrov N., Gràcia I., Sotelo-Vazquez C., Čechal J., Blackman C., Parkin I., Cané C. ZnO Rods

with Exposed {100} Facets Grown via a Self-Catalyzed Vapor–Solid Mechanism and Their Photocatalytic and Gas Sensing Properties APPLIED MATERIALS AND INTERFACES (2016) Volume: 8, Issue: 48, pp 33335–33342 DOI: https://doi.org/10.1021/acsami.6b12992

92. Yi Z., Luo J., Yec X., Yi Y., Huang J., Yi Y., Duan T., Zhang W., Tang Y., Effect of synthesis conditions

on the growth of various ZnO nanostructures and corresponding morphology-dependent photocatalytic activities. SUPERLATTICES AND MICROSTRUCTURES (2016) Volume: 100, Pp.: 907-917

CITAS B

[6] Heiras-Trevizo A., Amézaga-Madrid P., Corral-Bustamante L., Antúnez-Flores W., Pizá-Ruiz P., Miki-Yoshida M., Structural, morphological, optical and electrical properties of Sb-doped SnO2 thin films obtained by aerosol assisted chemical vapor deposition THIN SOLID FILMS (2017) Volume: 638, pp. 22-27 DOI: https://doi.org/10.1016/j.tsf.2017.07.017

[7] Monárrez-Cordero, B.E., Amézaga-Madrid, P., Fuentes-Cobas, L., Montero-Cabrera, M.E., Miki-Yoshida, M. High and fast adsorption efficiency of simultaneous As+3, As+5and F−by Al-doped magnetite synthesized via AACVD. JOURNAL OF ALLOY AND COMPOUNDS (2017) Volume: 718, pp. 414-424 DOI: https://doi.org/10.1016/j.jallcom.2017.05.126

[8] Sáenz-Trevizo, A., Amézaga-Madrid, P., Pizá-Ruiz, P., Antúnez-Flores, W., Miki-Yoshida, M. Optical band

gap estimation of ZnO nanorods. MATERIALS RESEARCH (2016) Volume: 19 Issue: 1 DOI: http://dx.doi.org/10.1590/1980-5373-mr-2015-0612

[9] Chavarría-Castillo K. A., Amézaga-Madrid P., Esquivel-Pereyra O., Antúnez-Flores W., Pizá Ruiz P., Miki-

Yoshida M., Synthesis and Microstructural Characterization of SnO2:F Thin Films Deposited by AACVD. MATERIALS RESEARCH (2016) Volume: 19, Issue: 1 DOI: http://dx.doi.org/10.1590/1980-5373-mr-2016-0350

[10] Fuentes-Cobas LE, Montero-Cabrera ME, Pardo L, Fuentes-Montero L, Ferroelectrics under the

Synchrotron Light: A Review MATERIALS (2016) Volume: 9, Issue: 1. DOI: http://dx.doi.org/10.3390/ma9010014

[11] Sáenz-Trevizo A., Amézaga-Madrid P., Pizá-Ruiz P., Antúnez-Flores W., Ornelas-Gutiérrez C., Miki-Yoshida

M., Single and multi-layered core-shell structures based on ZnO nanorods obtained by aerosol assisted chemical vapor deposition. Materials Characterization (2015) Volume: 105 Pp. 64-70 DOI: https://doi.org/10.1016/j.matchar.2015.04.020

10.- Microstructural characterization, optical and photocatalytic properties of bilayered CuO and ZnO based thin films By: A.Sáenz-TrevizoP.Amézaga-MadridP.Pizá-RuizO.Solís-CantoC.Ornelas-GutiérrezS.Pérez-GarcíaM.Miki-Yoshida. JOURNAL OF ALLOYS AND COMPOUNDS (2014) Volume: 615 Issue: Pp. S375-S381 DOI: https://doi.org/10.1016/j.jallcom.2014.01.149

11

CITAS A

93. Uma, R., Ravichandran, K. Fabrication of Co + F Doped ZnO Films for Improved Visible Light Responsive Photocatalysis KINETICS AND CATALYSIS (2017); Volume 58, Issue 6, pp 701–709. DOI: https://doi.org/10.1134/S0023158418010135

94. Xu L., Zhou Y., Wu Z., Zheng G., He J., Zhou Y., Improved photocatalytic activity of nanocrystalline ZnO by coupling with CuO. JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS. (2017) Volume 106, Pages 29-36 DOI: https://doi.org/10.1016/j.jpcs.2017.03.001

95. Salah, N., Hameed, A., Aslam, M., Babkair, S.S., Bahabri, F.S., The performance of Zn1−xCexO

nanoparticles thin films in sunlight exposure: synthesis, characterization and photocatalytic activity. DESALINATION AND WATER TREATMENT (2016) Volume 57, Issue 53, Pages 25581-25590 DOI: https://doi.org/10.1080/19443994.2016.1152512

96. Li H., Yang Y., Feng X., Performance Improvement of CH3NH3PbI3 Perovskite Solar Cell by CH3SH

Doping. NANOMATERIALS AND NANOTECHNOLOGY. (2016) Volume: 6, Issue: 24 DOI: https://doi.org/10.5772/62435

97. Ghotbi, M.Y., Rahmati, Z., Nanostructured copper and copper oxide thin films fabricated by

hydrothermal treatment of copper hydroxide nitrate. MATERIALS AND DESIGN. (2015) Volume: 85, Pp. 719-723. DOI: https://doi.org/10.1016/j.matdes.2015.07.081

CITAS B

[12] Monárrez-Cordero B.E., Amézaga-Madrid P., Sáenz-Trevizo A., Pizá-Ruiz P., Antúnez-Flores W., Miki-Yoshida M., Synthesis and characterization of composite Fe-Ti oxides nanoparticles with high surface area obtained via AACVD CERAMICS INTERNATIONAL (2018) Volume: 44, Issue: 6, Pp. 6990-6996; DOI: https://doi.org/10.1016/j.ceramint.2018.01.132

[13] Heiras-Trevizo A., Amézaga-Madrid P., Corral-Bustamante L., Antúnez-Flores W., Pizá-Ruiz P., Miki-Yoshida M., Structural, morphological, optical and electrical properties of Sb-doped SnO2 thin films obtained by aerosol assisted chemical vapor deposition. THIN SOLID FILMS. (2017) Volume 638, Pp. 22-27 DOI: https://doi.org/10.1016/j.tsf.2017.07.017

[14] Monárrez-Cordero, B.E., Amézaga-Madrid, P., Fuentes-Cobas, L., Montero-Cabrera, M.E., Miki-Yoshida, M.,

High and fast adsorption efficiency of simultaneous As+3, As+5and F−by Al-doped magnetite synthesized via AACVD. JOURNAL OF ALLOYS AND COMPOUNDS (2017) Volume 718, Pp. 414-424 DOI: https://doi.org/10.1016/j.jallcom.2017.05.126

[15] Chavarría-Castillo K. A., Amézaga-Madrid P., Esquivel-Pereyra O., Antúnez-Flores W., Pizá Ruiz P., Miki-

Yoshida M., Synthesis and Microstructural Characterization of SnO2:F Thin Films Deposited by AACVD. MATERIALS RESEARCH (2016) Volume: 19, Issue: 1 DOI: http://dx.doi.org/10.1590/1980-5373-mr-2016-0350

[16] Sáenz-Trevizo A., Amézaga-Madrid P., Pizá-Ruiz P., Antúnez-Flores W., Ornelas-Gutiérrez C., Miki-Yoshida

M., Efficient and durable ZnO core-shell structures for photocatalytic applications in aqueous media. MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING. (2016). Volume: 45, Pages: 57-68. DOI: https://doi.org/10.1016/j.mssp.2016.01.018

[17] Sáenz-Trevizo A., Amézaga-Madrid P., Pizá-Ruiz P., Antúnez-Flores W., Ornelas-Gutiérrez C., Miki-Yoshida M., Single and multi-layered core-shell structures based on ZnO nanorods obtained by aerosol assisted chemical vapor deposition. MATERIALS CHARACTERIZATION. (2015). Volume: 105, Pp. 64-70. DOI: https://doi.org/10.1016/j.matchar.2015.04.020

12

[18] M. Lugo-Ruelas, P. Amézaga-Madrid, O. Esquivel-Pereyra, W. Antúnez-Flores, P. Pizá-Ruiz, C. Ornelas-

Gutiérrez, M. Miki-Yoshida. Synthesis, microstructural characterization and optical properties of CuO nanorods and nanowires obtained by aerosol assisted CVD. JOURNAL OF ALLOYS AND COMPOUNDS. (2015) Volume: 643, Supplement: 1, Pages S46-S50. DOI: https://doi.org/10.1016/j.jallcom.2014.11.119

11.- Physical properties of inulin and inulin–orange juice: Physical characterization and technological application By: Saavedra-Leos M.Z., Leyva-Porras C., Martínez-Guerra E., Pérez-García S.A., Aguilar-Martínez J.A., Álvarez-Salas C., CARBOHYDRATE POLYMERS Volume: 105, Pages: 10-19 Published: 2014 DOI: https://doi.org/10.1016/j.carbpol.2013.12.079 CITAS A

98. S. Verruck, F. Santana, C. Olivera Müller, E. Schwinden Prudencio Thermal and water sorption properties of Bifidobacterium BB-12 microcapsules obtained from goat's milk and prebiotics LWT-Food Science and Technology (2018) Volume: 98 Pages: 314-321 DOI: https://doi.org/10.1016/j.lwt.2018.08.060

99. I. Ahmed, M. B. Khan Niazi, Z. Jahan, S. R. Naqvi, Effect of drying parameters on the physical,

morphological and thermal properties of spray-dried inulin Journal Of Polymer Engineering (2018) Volume: 38 Issue: 8 Pages: 775-783 DOI: https://doi.org/10.1515/polyeng-2017-0064

100. W. Wan, B. Xu, Development of an orange juice beverage formulated with oat beta-glucan and

whey protein isolate Journal of The Science of Food And Agriculture Volume: 98 Issue: 12 Pages: 4685-4691 DOI: https://doi.org/10.1002/jsfa.9002

101. Conceição Apolinário A., Martinsde Carvalho E., Goulartde Lima Damasceno B.P., Dantasda Silva

P.C., Converti A., Pessoa Jr. A., Alexsandro da Silva J., Extraction, isolation and characterization of inulin from Agave sisalana boles. INDUSTRIAL CROPS AND PRODUCTS, (2017) Volume 108, Pp. 355-362 DOI: https://doi.org/10.1016/j.indcrop.2017.06.045

102. Alves N.N., de Oliveira Sancho S., da Silva A.R.A., Desobry S., da Costa J.M.C., Rodrigues S., Spouted bed as an efficient processing for probiotic orange juice drying. FOOD RESEARCH INTERNATIONAL, (2017) Volume: 101, Pp.: 54-60. DOI: https://doi.org/10.1016/j.foodres.2017.08.052

103. Lim, Y.-H., Siow, L.-F., Spray Dried Xanthone in Oil Emulsion Using Inulin as Wall Material.

JOURNAL OF FOOD PROCESSING AND PRESERVATION. (2017) Volume: 41, Issue: 4 PP. e13038 DOI: https://doi.org/10.1111/jfpp.13038

104. De Barros Fernandes R.V., Alvarenga Botrel D., Keven Silva E., Vilela Borges S., Rodrigues de

Oliveira C., Yoshida M.I., de Andrade Feitosa J.P., Monteirode Paula R.C., Cashew gum and inulin: New alternative for ginger essential oil microencapsulation. CARBOHYDRATE POLYMERS. (2016) Volume: 153, Pp.133-142. DOI: https://doi.org/10.1016/j.carbpol.2016.07.096

105. Alves, N.N., Messaoud, G.B., Desobry, S., Costa, J.M.C., Rodrigues, S., Effect of drying technique

and feed flow rate on bacterial survival and physicochemical properties of a non-dairy fermented probiotic juice powder. JOURNAL OF FOOD ENGINEERING. (2016) Volume 189, Pp. 45-54 DOI: https://doi.org/10.1016/j.jfoodeng.2016.05.023

106. Terkmane, N., Krea, M., Moulai-Mostefa, N., Optimisation of inulin extraction from globe

artichoke (Cynara cardunculus L. subsp. scolymus (L.) Hegi.) by electromagnetic induction heating process. INTERNATIONAL JOURNAL OF FOOD SCIENCE AND TECHNOLOGY. (2016) Volume: 59, Issue: 9, Pp. 1997-2008 DOI: https://doi.org/10.1111/ijfs.13167

13

107. Tsokolar-Tsikopoulos, K.C., Katsavou, I.D., Krokida, M.K., ‘The effect of inulin addition on structural and textural properties of extruded products under several extrusion conditions’: The effect of inulin addition on structural and textural properties of rice flour extrudates. JOURNAL OF FOOD SCIENCE AND TECHNOLOGY. (2015) Volume: 52, Issue: 10 Pp. 6170–6181. DOI: https://doi.org/10.1007/s13197-015-1718-2

108. Rueangwatcharin, U., Wichienchot, S., Development of functional canned and pouched tuna

products added inulin for commercial production. JOURNAL OF FOOD SCIENCE AND TECHNOLOGY. (2015) Volume: 52, Issue: 8, pp. 5093–5101. DOI: https://doi.org/ 10.1007/s13197-014-1589-y

CITAS B

[19] Saavedra–Leos M.Z., Leyva-Porras C., Alvarez-Salas C., Longoria-Rodríguez F.,. López-Pablos A.L, González-García R., Pérez-Urizar J.T., Obtaining orange juice–maltodextrin powders without structure collapse based on the glass transition temperature and degree of polymerization CyTA - Journal of Food (2018) Volume: 16, Issue: 1 Pp. 61-69; DOI: https://doi.org/10.1080/19476337.2017.1337048

[20] Araujo-Díaz S.B., Leyva-Porras C., Aguirre-Bañuelos P., Álvarez-Salas C., Saavedra-Leos Z., Evaluation of the physical properties and conservation of the antioxidants content, employing inulin and maltodextrin in the spray drying of blueberry juice. CARBOHYDRATE POLYMERS. (2017) Volume: 167, Pp. 317-325. DOI: https://doi.org/10.1016/j.carbpol.2017.03.065

[21] Leyva‐Porras C., Saavedra–Leos M.Z., López‐Pablos A.L., Soto‐Guerrero J.J., Toxqui‐Terán A., Fozado‐

Quiroz R.E., Chemical, Thermal and Physical Characterization of Inulin for its Technological Application Based on the Degree of Polymerization. JOURNAL OF FOOD PROCESS ENGINEERING. (2017) Volume:40, Issue: 1, Pp. e12333 . DOI: https://doi.org/10.1111/jfpe.12333

[22] Saavedra-Leos, Z., Leyva-Porras, C., Araujo-Díaz, S.B., Toxqui-Terán, A., Borrás-Enríquez, A.J., Technological application of maltodextrins according to the degree of polymerization. MOLECULES. (2015) Volume: 20, Issue: 12, Pp. 21067-21081; DOI: https://doi.org/10.3390/molecules201219746

[23] Leyva-Porras, C., López-Pablos, A.L., Alvarez-Salas, C., Pérez-Urizar, J., Saavedra-Leos, Z., Physical properties of inulin and technological applications (Book Chapter), In: Polysaccharides: Bioactivity and Biotechnology, Springer, Cham. Ramawat K., Mérillon JM. (editors). DOI: https://doi.org/10.1007/978-3-319-03751-6_80-1. Online ISBN: 978-3-319-03751-6

12.- Magnon-mediated thermal rectification with forward-bias and breakdown temperaturas By: Martínez-Flores J. J., Licea-Jimenez L., Perez Garcia S. A., and Alvarez-Quintana J.. JOURNAL OF APPLIED PHYSICS. (2013) Volume: 114, Issue: 10 Article ID 104904 . DOI: https://doi.org/10.1063/1.4820937 CITAS A

109. Wehmeyer G., Yabuki T., Monachon C., Wu J., Dames C.. Thermal diodes, regulators, and switches: Physical mechanisms and potential applications. APPLIED PHYSICS REVIEWS (2017) Volume: 4, Issue: 4, Pp. 041304. DOI: https://doi.org/10.1063/1.5001072

110. Romero-Bastida M, Ramírez-Jarquín M., Thermal rectification in one-dimensional mass-graded lattices with an on-site potential. JOURNAL OF PHYSICS A: MATHEMATICAL AND THEORETICAL (2017) Volume: 50, Issue:1, Pp. 015004. DOI: https://doi.org/10.1088/1751-8113/50/1/015004

13.- Comprehensive characterization of thermophysical properties in solids using thermal impedance. By: Martínez-Flores J. J., Licea-Jiménez L., Pérez García S. A., Rodríguez-Viejo J., Alvarez-Quintana J., JOURNAL OF APPLIED PHYSICS. (2012) Volume 112, Issue 9 Article ID 094901 DOI: https://doi.org/10.1063/1.4759434 CITAS A

14

111. García-Cañadas J., Min G.. Thermal dynamics of thermoelectric phenomena from frequency

resolved methods. (2016) AIP Advances Volume: 6, Issue: 3, Pp.035008. DOI: https://doi.org/10.1063/1.4943958

112. Hutzler A., Tokarski A., Schletz A., High temperature die-attach materials for aerospace power electronics: Lifetime tests and modeling. (2015) 2015 IEEE Aerospace Conference, DOI: https://doi.org/ 10.1109/AERO.2015.7118949

14.- Glass transition study in model food systems prepared with mixtures of fructose, glucose and sucrose Author(s): M. Z. Saavedra-Leos, A. Grajales-Lagunes, R. González-García, A. Toxqui-Teran, S. A. Pérez-García, M. Abud-Archila, M. A. Ruiz-Cabrera Source: JOURNAL OF FOOD SCIENCE Volume: 77 Issue: 5 Pages: E118 Published: MAY 2012 CITAS A

113. S. L. Gawali, M. Zhang, S. Kumar, V. K. Aswal, D. Danino, P. A. Hassan Dynamically arrested micelles in a supercooled sugar urea melt COMMUNICATIONS CHEMISTRY (2018) Volume: 1, Article Number: 33 DOI: https://doi.org/10.1038/s42004-018-0032-0

114. Rothe R., Antonietti M., Fechler N., The bakery of high-end sorption carbons: sugar–urea

doughs as processable precursors for functional carbons, JOURNAL OF MATERIALS CHEMISTRY A, (2017), Volume: 5, Issue: 31, Pp.16352-16358, DOI: https://doi.org/10.1039/C7TA02052J

115. Mayhew E. J.,. Neal C. H,. Lee S.-Y, Schmidt J .S., Glass transition prediction strategies based on the Couchman-Karasz equation in model confectionary systems. JOURNAL OF FOOD ENGINEERING. (2017) Volume: 214, Pp.287-302. DOI: https://doi.org/10.1016/j.jfoodeng.2017.07.007

116. Lu Y., Thomas L., Schmidt S., Differences in the thermal behavior of beet and cane sucrose

sources. JOURNAL OF FOOD ENGINEERING. (2017) Volume: 201, Pp. 57-70. DOI: https://doi.org/10.1016/j.jfoodeng.2017.01.005

117. Rodríguez-Bernal J. M., Tello E., Flores-Andrade E., Perea-Flores M. de J., Vallejo-Cardona A. A.,

Gutiérrez-López G. F., Quintanilla-Carvajal M. X., Effect of borojo (Borojoa patinoi Cuatrecasas) three-phase composition and gum arabic on the glass transition temperature. JOURNAL OF THE SCIENCE OF FOOD AND AGRICULTURE. (2016) Volume: 96, Issue: 3 Pp. 1027-1036 DOI: https://doi.org/10.1002/jsfa.7190

118. Roos Y. H., Drusch S., Chapter 5 – Food components and polymers. (2016) Phase Transitions

in Foods (Second Edition), ACADEMIC PRESS. Pp. 115–172. DOI: https://doi.org/10.1016/B978-0-12-408086-7.00005-X

119. Gu J., Ahn-Jarvis J. H., Vodovotz Y., Development and Characterization of Different Black

Raspberry Confection Matrices Designed for Delivery of Phytochemicals. JOURNAL OF FOOD SCIENCE. (2015) Volume: 80, Issue: 3 Pp. Pages E610-E618 DOI: https://doi.org/10.1111/1750-3841.12808

120. Van Der Sman, R.G.M. Predictions of glass transition temperature for hydrogen bonding biomaterials JOURNAL OF PHYSICAL CHEMISTRY B, (2013) Volume: 117, Issue: 50, pp. 16303-16313 DOI: https://doi.org/10.1021/jp408184u

CITAS B

[24] Leyva‐Porras C., Saavedra–Leos M.Z., López‐Pablos A.L., Soto‐Guerrero J.J., Toxqui‐Terán A., Fozado‐Quiroz R.E., Chemical, Thermal and Physical Characterization of Inulin for its Technological Application Based on the Degree of Polymerization. JOURNAL OF FOOD PROCESS ENGINEERING. (2017) Volume: 40, Issue: 1 Pp. e12333 DOI: https://doi.org/10.1111/jfpe.12333

15

[25] Ruiz-Cabrera M.A., Rivera-Bautista C., Grajales-Lagunes A., González-García R., Schmidt S.J., State diagrams for mixtures of low molecular weight carbohydrates. JOURNAL OF FOOD ENGINEERING. (2016) Volume:171,Pp.185-193 DOI: https://doi.org/10.1016/j.jfoodeng.2015.10.03

[26] Ruiz-Cabrera M.A., Schmidt S.J., Determination of glass transition temperatures during cooling and

heating of low-moisture amorphous sugar mixtures. JOURNAL OF FOOD ENGINEERING. (2015) Volume: 146, Pp.36-43 DOI: https://doi.org/10.1016/j.jfoodeng.2014.08.023

15.- Towards an improved calorimetric methodology for glass transition temperature determination in amorphous sugars By: Saavedra-Leos M.Z., Alvarez-Salas C., Esneider-Alcalá M.A., Toxqui-Terán A., Pérez-García S.A., Ruiz-Cabrera M.A., CYTA - JOURNAL OF FOOD, Volume: 10 Issue: 4 , pp. 258-267 Published: 2012 CITAS A

121. C. O. Dias, J. doS. Opuski de Almeida, S. S. Pinto, Development and physico-chemical characterization of microencapsulated bifidobacteria in passion fruit juice: A functional non-dairy product for probiotic delivery.FOOD BIOSCIENCE (2018) Volume: 24 Pages: 26-36 DOI: https://doi.org/

122. Non-enzymatic browning kinetics in sucrose-glycine aqueous and dehydrated model systems in

presence of MgCl2 By: Santagapita, Patricio R.; Matiacevich, Silvia B.; del Pilar Buera, Maria FOOD RESEARCH INTERNATIONAL (2018) Volume: 114 Pages: 97 DOI: https://doi.org/

123. Biswas, A., Kim, S., Gómez, A., Buttrum, M., Boddu, V., Cheng, H.N., Microwave-Assisted

Synthesis of Sucrose Polyurethanes and Their Semi-interpenetrating Polymer Networks with Polycaprolactone and Soybean Oil. INDUSTRIAL AND ENGINEERING CHEMISTRY RESEARCH. (2018) Volume: 57, Issue: 9, Pp. 3227–3234 DOI: https://doi.org/10.1021/acs.iecr.7b04059

124. Orue A., Santamaria-Echart A., Eceiza A., Peña-Rodriguez C., Arbelaiz A., Office waste paper as cellulose nanocrystal source. JOURNAL OF APPLIED POLYMER SCIENCE. (2017) Volume: 134, Issue: 35 Pp. 45257 DOI: https://doi.org/10.1002/app.45257

125. Witczak, T., Witczak, M., Socha, R., StĘPień, A., Grzesik, M., Candied Orange Peel Produced in

Solutions with Various Sugar Compositions: Sugar Composition and Sorption Properties of the Product. JOURNAL OF FOOD PROCESS ENGINEERING. (2017) Volume: 40, Issue: 2 Pp. e12367 DOI: https://doi.org/10.1111/jfpe.12367

CITAS B

[27] Grajales-Lagunes A., Rivera-Bautista C., Loredo-García I.O., González-García R., González-Chávez M.M., Schmidt S.J., Ruiz-Cabrera M.A., Using model food systems to develop mathematical models for construction of state diagrams of fruit products. JOURNAL OF FOOD ENGINEERING. (2018) Volume: 230, P.p. 72-81 DOI: https://doi.org/10.1016/j.jfoodeng.2018.02.025

[28] Saavedra–Leos M.Z., Leyva-Porras C., Alvarez-Salas C., Longoria-Rodríguez F.,. López-Pablos A.L, González-García R., Pérez-Urizar J.T., Obtaining orange juice–maltodextrin powders without structure collapse based on the glass transition temperature and degree of polymerization CyTA - Journal of Food (2018) Volume: 16, Issue: 1 Pp. 61-69; DOI: https://doi.org/10.1080/19476337.2017.1337048

[29] Araujo-Díaz, S.B., Leyva-Porras, C., Aguirre-Bañuelos, P., Álvarez-Salas, C., Saavedra-Leos, Z.,

Evaluation of the physical properties and conservation of the antioxidants content, employing inulin and maltodextrin in the spray drying of blueberry juice. CARBOHYDRATE POLYMERS. (2017) Volume 167, Pp. 317-325 DOI: https://doi.org/10.1016/j.carbpol.2017.03.065

16

[30] Leyva-Porras, C., López-Pablos, A.L., Alvarez-Salas, C., Pérez-Urizar, J., Saavedra-Leos, Z., Physical

properties of inulin and technological applications (Book Chapter), In: Polysaccharides: Bioactivity and Biotechnology, Springer, Cham. Ramawat K., Mérillon JM. (editors). DOI: https://doi.org/10.1007/978-3-319-03751-6_80-1. Online ISBN: 978-3-319-03751-6

16.- Inhibition on Carbon Steel Corrosion in Presence of Hydrocarbon By: López León L.D., Veloz Rodríguez M.A., Reyes Cruz V.E., Pérez García S.A., López León A.L., INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE. Volume: 6, Pages: 5134-5145 Published: 2011 CITAS A

126. Olajire, Abass A., Corrosion inhibition of offshore oil and gas production facilities using organic compound inhibitors - A review. JOURNAL OF MOLECULAR LIQUIDS. (2017) Volume: 248, Pp. 775–808 DOI: https://doi.org/10.1016/j.molliq.2017.10.097

127. Ilim, Alan Jefferson, Wasinton Simanjuntak, Marc Jeannin, Yana Maolana Syah, Bunbun Bundjali, and Buchari, Performance of oligomer 4-vinylpiperidine as a carbon dioxide corrosión inhibitor of mild steel. INDONESIAN JOURNAL OF CHEMISTRY. Volume:16, Issue: 2 . Pp. 198-207 DOI: https://doi.org/10.22146/ijc.21164

128. Mohammed Hliyil Hafiz, Rana Afif Majed, Rana Sahib Noor, Muthana A.Wehib, Phenylenediamine

as Inhibitor in Sour Water at Oil Refinery. INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE. (2013) Volume: 8 Pp. 12402 - 12416 http://www.electrochemsci.org/papers/vol8/81212402.pdf

17. Temperature dependent thermal conductivity of polycrystalline ZnO films By: Alvarez-Quintana J. ; Martinez E. ; Perez-Tijerina E. ; Perez-Garcia, SA; Rodriguez-Viejo, J. Source: JOURNAL OF APPLIED PHYSICS Volume: 107 Issue: 6 Article Number: 063713 DOI: 10.1063/1.3330755 Published: MAR 15 2010 CITAS A

129. Gaskins, John T.; Kotsonis, George; Giri, Ashutosh et al. Thermal Boundary Conductance Across Heteroepitaxial ZnO/GaN Interfaces: Assessment of the Phonon Gas Model NANO LETTERS (2018) Volume: 18 Issue: 12 Pages: 7469-7477 DOI: https://doi.org/10.1021/acs.nanolett.8b02837

130. Rogério M.S.Gama An a priori upper bound estimate for conduction heat transfer problems with

temperature-dependent thermal conductivity Mechanics Research Communications (2018) Volume: 92 Pages: 87-91 DOI: https://doi.org/10.1016/j.mechrescom.2018.08.002

131. C. Peng, G. Qin, L. Zhang, G. Zhang, C. Wang, Y. Yan, Y. Wang, M. Hu Dependence of phonon transport

properties with stacking thickness in layered ZnO Journal of Physics D: Applied Physics Volume: 51 Issue: 31 Article Number: 315303 DOI: https://doi.org/10.1088/1361-6463/aacf19

132. F. Krahl, A. Giri, J. A. Tomko, T. Tynell, P.E. Hopkins, M. Karppinen Thermal Conductivity Reduction at

Inorganic-Organic Interfaces: From Regular Superlattices to Irregular Gradient Layer Sequences Advanced Materials Interfaces (2018) Volume: 5 Issue: 11 Article Number: 1701692 DOI: https://doi.org/10.1002/admi.201701692

133. C. Tabasco-Novelo, J. May-Crespo, J. A. Ramírez-Rincón, I. Y. Forero-Sandoval, G. Rodríguez-Gattorno,

P. Quintana, J. J. Alvarado-Gil., Effects of Sintering on the Thermal and Optical Properties of Zinc Oxide Ceramic. INTERNATIONAL JOURNAL OF THERMOPHYSICS (2018) Volume: 39, Issue: 22 . DOI:

17

https://doi.org/10.1007/s10765-017-2330-7

134. Kim K., Park J., Hong S., Park S.H., Jeon S.G., Ahn C., Song J.Y., Jeon S., Anomalous thermoelectricity of pure ZnO from 3D continuous ultrathin nanoshell structures. NANOSCALE. (2018) Volume: 10, Issue: 6, Pp.3046-3052. DOI: https://doi.org/10.1039/C7NR08167G

135. Xin Liang, Lei Shen., Optimizing interfacial transport properties of InO2 single atomic layers in In2O3

(ZnO)4 natural superlattices for enhanced high temperature thermoelectrics. NANOSCALE. (2018) Volume:10,Issue:9,Pp.4500-4514.DOI: https://doi.org/10.1039/C7NR09585F

136. Abdalla M. Darwish, Sergey S. Sarkisov, Paolo Mele, Shrikant Saini. Chapter 10: Multi-Beam Multi-Target

Pulsed Laser Deposition of AZO Films with Polymer Nanoparticles for Thermoelectric Energy Harvesters. Laser Ablation - From Fundamentals to Applications, Dr. Tatiana Itina (Ed.), INTECH, (2017) Pp. 213- 226 DOI: https://doi.org/10.5772/intechopen.70678. Available from: https://mts.intechopen.com/books/laser-ablation-from-fundamentals-to-applications/multi-beam-multi-target-pulsed-laser-deposition-of-azo-films-with-polymer-nanoparticles-for-thermoel

137. Tsakonas C, Kuznetsov V L, Cranton W M, Kalfagiannis N, Abusabee K M, Koutsogeorgis D C,

Abeywickrama N, Edwards P P. Low temperature sputter-deposited ZnO films with enhanced Hall mobility using excimer laser post-processing. JOURNAL OF PHYSICS D: APPLIED PHYSICS (2017) Volume: 50, Issue: 48, Pp. 485306 DOI: https://doi.org/10.1088/1361-6463/aa9316 .

138. Chen-Tao W., Chu-Chi T., Po-Ching K., Shan-Rong L., Sheng-Yuan C., Enhanced optical, electrical, and

mechanical characteristics of ZnO/Ag grids/ZnO flexible transparent electrodes. JOURNAL OF APPLIED PHYSICS (2017) Volume: 122, issue: 8, Pp. 085501. DOI: https://doi.org/10.1063/1.4994965

139. Cervantes-López J L, Rangel R, García-Méndez M, Tiznado H, Contreras O, Quintana P, Bartolo-Pérez P,

Alvarado-Gil J J., Indium-doped ZnO nanorods grown on Si (1 1 1) using a hybrid ALD-solvothermal method. MATERIALS RESEARCH EXPRESS (2017) Volume: 4, Issue: 7, Pp. 075032. DOI: https://doi.org/10.1088/2053-1591/aa7650

140. Jin H., Marin G., Giri A., Tynell T., Gestranius M., Wilson B.P., Kontturi E., Tammelin T., Hopkins P.E.,

Karppinen M., Strongly reduced thermal conductivity in hybrid ZnO/nanocellulose thin films. JOURNAL OF MATERIALS SCIENCE (2017) Volume: 52, Issue: 10, Pp.6093-6099. DOI: https://doi.org/10.1007/s10853-017-0848-5

141. Brockway L., Taylor H., A nanoporous, ultrahydrophobic aluminum-coating process with exceptional

dropwise condensation and shedding properties. MATERIALS RESEARCH EXPRESS (2017) Volume: 4, Issue: 4, pp. 045003. DOI: https://doi.org/10.1088/2053-1591/aa613f

142. Liang X., Impact of grain boundary characteristics on lattice thermal conductivity: A kinetic theory

study on ZnO. PHYSICAL REVIEW B (2017) Volume: 95, Issue: 15, Pp. 155313. DOI: https://doi.org/10.1103/PhysRevB.95.155313

143. Kim J. M., Kang S. H., Yu D. I., Park H. S., Moriyama K., Kim M. H., Smart surface in flow boiling:

Spontaneous change of wettability. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017) Volume: 105, Pp.147-156. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.047

144. Peng W., Yu R., Wang X., Wang Z., Zou H., He Y., Wang Z. L., Temperature dependence of pyro-

phototronic effect on self-powered ZnO/perovskite heterostructured photodetectors. NANO RESEARCH (2016) Volume: 9, Issue: 12, Pp.3695-3704. DOI: https://doi.org/10.1007/s12274-016-1240-5

145. Karttunen A.J., Tynell T., Karppinen M., Layer-by-layer design of nanostructured thermoelectrics:

First-principles study of ZnO:organic superlattices fabricated by ALD/MLD. NANO ENERGY (2016) Volume: 22, Pp.338-348. DOI: https://doi.org/10.1016/j.nanoen.2016.02.028

146. Saini S., Mele P., Honda H., Suzuki T., Matsumoto K., Miyazaki K., Ichinose A., Molina Luna L., Carlini R.,

18

Tiwari A., Effect of self-grown seed layer on thermoelectric properties of ZnO thin films. THIN SOLID FILMS (2016) Volume: 605, Pp. 289-294. DOI: https://doi.org/10.1016/j.tsf.2015.09.060

147. Giri A., Niemelä J.P., Tynell T., Gaskins J.T., Donovan B.F., Karppinen M., Hopkins P.E., Heat-transport

mechanisms in molecular building blocks of inorganic/organic hybrid superlattices. PHYSICAL REVIEW B (2016) Volume: 93, Issue: 11, Pp.115310. DOI: https://doi.org/10.1103/PhysRevB.93.115310

148. Chen Q., Zhang C., Zhu M., Liu S., Siemens M.E., Gu S., Zhu J., Shen J., Wu X., Liao C., Zhang J., Wang

X., Xiao M., Efficient thermal conductance in organometallic perovskite CH3NH3PbI3 films. APPLIED PHYSICS LETTERS (2016) Volume: 108, Issue: 8, Pp.081902. DOI: https://doi.org/10.1063/1.4942779

149. Giri A., Niemelä J.P., Szwejkowski C.J., Karppinen M., Hopkins P.E., Reduction in thermal conductivity

and tunable heat capacity of inorganic/organic hybrid superlattices. PHYSICAL REVIEW B (2016) Volume: 93, Issue: 2, Pp. 024201. DOI: https://doi.org/10.1103/PhysRevB.93.024201

150. Cho S.W., Jeong M., Kim J.H., Kwon Y.H., Kim H., Lee J.Y.,. Cho H.K. A combinatorial approach to

solution-processed InGaO3(ZnO)m superlattice films: growth mechanisms and their thermoelectric properties. CRYSTENGCOMM (2016) Volume: 18, Issue: 5, Pp. 807-815. DOI: https://doi.org/10.1039/C5CE01764E

151. Ruoho M., Valset K., Finstad T., Tittonen I., Measurement of thin film thermal conductivity using the

laser flash method. NANOTECHNOLOGY (2015) Volume: 26, Issue: 19, Pp. 195706. DOI: https://doi.org/10.1088/0957-4484/26/19/195706

152. Huang H.T., Lai M.F., Hou Y.F., Wei Z.H., Influence of Magnetic Domain Walls and Magnetic Field on

the Thermal Conductivity of Magnetic Nanowires. NANO LETTERS (2015) Volume: 15, Issue: 5, Pp. 2773-2779. DOI: https://doi.org/10.1021/nl502577y

153. Chen Y., Gao X., Wang J., He W., Silberschmidt V.V., Wang S., Tao Z., Xu H., Properties and application

of polyimide-based composites by blending surface functionalized boron nitride nanoplates. JOURNAL OF APPLIED POLYMER SCIENCE (2015) Volume: 132, Issue: 16, Pp. 41889. DOI: https://doi.org/10.1002/app.41889

154. Lee W.Y., Park N.W., Hong J.E., Yoon S.G., Koh J.H., Lee S.K., Effect of electronic contribution on

temperature-dependent thermal transport of antimony telluride thin film. JOURNAL OF ALLOYS AND COMPOUNDS (2015) Volume: 620, Pp. 120-124. DOI: https://doi.org/10.1016/j.jallcom.2014.09.053

155. Gangwar J., Gupta B.K., Tripathi S.K., Srivastava A.K., Phase dependent thermal and spectroscopic

responses of Al2O3 nanostructures with different morphogenesis. NANOSCALE (2015) Volume: 7, Issue: 32, Pp.13313-13344. DOI: https://doi.org/10.1039/C5NR02369F

156. Kesim Y.E., Battal E., Tanrikulu M.Y., Okyay A.K., An all-ZnO microbolometer for infrared imaging.

INFRARED PHYSICS & TECHNOLOGY (2014) Volume: 67, Pp. 245-249. DOI: https://doi.org/10.1016/j.infrared.2014.07.023

157. Brockway L., Vasiraju V., Sunkara M.K., Vaddiraju S., Engineering Efficient Thermoelectrics from

Large-Scale Assemblies of Doped ZnO Nanowires: Nanoscale Effects and Resonant-Level Scattering. ACS APPLIED MATERIALS & INTERFACES (2014) Volume: 6, Issue: 17, Pp.14923-14930. DOI: https://doi.org/10.1021/am5023489

158. Juwhari H.K., Zihlif A., Elimat Z., Ragosta G., A study on the DC-electrical and thermal conductivities

of epoxy/ZnO composites doped with carbon black. RADIATION EFFECTS AND DEFECTS IN SOLIDS (2014) Volume: 169, Issue: 6, Pp.560-572. DOI: https://doi.org/10.1080/10420150.2014.905944

159. Pastoriza-Gallego M.J., Lugo L., Cabaleiro D., Legido J.L., Piñeiro M.M.. Thermophysical profile of

ethylene glycol-based ZnO nanofluids. THE JOURNAL OF CHEMICAL THERMODYNAMICS (2014) Volume: 73, Pp. 23-30. DOI: https://doi.org/10.1016/j.jct.2013.07.002

19

160. Kazan M., Masri P., The contribution of surfaces and interfaces to the crystal thermal conductivity.

SURFACE SCIENCE REPORTS (2014) Volume: 69, Issue: 1, Pp.1-37. DOI: https://doi.org/10.1016/j.surfrep.2013.11.001

161. Kazan M., Volz S., Calculation of the lattice thermal conductivity in granular crystals. JOURNAL OF

APPLIED PHYSICS (2014) Volume: 115, Issue: 7, Pp. 073509. DOI: https://doi.org/10.1063/1.4866362

162. Rajamanickam N., Rajashabala S., Ramachandran K., Theoretical and experimental investigation on

enhanced thermal behaviour in chunk-shaped nano ZnO. MOLECULAR PHYSICS (2014) Volume: 112, Issue: 1, Pp. 142-150. DOI: https://doi.org/10.1080/00268976.2013.805265

163. Wang C., Wang Y., Zhang G., Peng C., Yang G., Theoretical investigation of the effects of doping on

the electronic structure and thermoelectric properties of ZnO nanowires. PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014) Volume: 16, Issue: 8, Pp.3771. DOI: https://doi.org/10.1039/C3CP54289K

164. Tynell T., Giri A., Gaskins J., Hopkins P.E., Mele P., Miyazaki K., Karppinen M., Efficiently suppressed

thermal conductivity in ZnO thin films via periodic introduction of organic layers. Journal of Materials Chemistry A (2014) Volume: 2, Issue: 31, Pp. 12150-12152. DOI: https://doi.org/10.1039/C4TA02381A

165. Aksamija, Z., Knezevic, I. Thermal conductivity of Si1-xGex/Si1-yGey superlattices:

Competition between interfacial and internal scattering (2013) Physical Review B, 88 (15), pp. 155318 DOI: https://doi.org/10.1103/PhysRevB.88.155318

166. Wang, C., Wang, Y., Zhang, G., Peng, C. Electronic structure and thermoelectric properties of ZnO single-walled nanotubes and nanowires(2013) Journal of Physical Chemistry C, 117 (41), pp. 21037-

21042. DOI: https://doi.org/ 10.1021/jp403827n

167. El-Brolossy, T. A.; Saber, O.; Ibrahim, S. S. Determining the thermophysical properties of Al-doped

ZnO nanoparticles by the photoacoustic technique Chinese Physics B 22 (7), pp. 074401, DOI: https://doi.org/10.1088/1674-1056/22/7/074401

168. Mutharasu, D., Shanmugan, S., Anithambigai, P., Yin, O.Z. Performance testing of 3-� LED mounted

on ZnO thin film coated al as heat sink using dual interface method (2013) IEEE Transactions on Electron Devices, 60 (7), art. no. 6529109, pp. 2290-2295. DOI: https://doi.org/10.1109/TED.2013.2261856

169. Saldanha Da Gama, R.M., Corrêa, E.D., Martins-Costa, M.L. An upper bound for the steady-state

temperature for a class of heat conduction problems wherein the thermal conductivity is temperature dependent (2013) International Journal of Engineering Science, 69, pp. 77-83. DOI: https://doi.org/10.1016/j.ijengsci.2013.04.002

170. Vogel-Schauble, N., Jaeger, T., Romanyuk, Y.E.,Populoh, S., Mix, C., Jakob, G., Weidenkaff, A. Thermal

conductivity of thermoelectric Al-substituted ZnO thin films (2013) Physica Status Solidi-Rapid Research Letters, 7 (5), pp. 364-367. DOI: https://doi.org/10.1002/pssr.201307025

171. Dai, J., Zeng, J.-H., Lan, S., Wan, X., Tie, S.-L. Competition between second harmonic generation and

two-photon-induced luminescence in single, double and multiple ZnO nanorods (2013) Optics Express, 21 (8), pp. 10025-10038. DOI: https://doi.org/10.1364/OE.21.010025.

172. Cabaleiro, D., Pastoriza-Gallego, M.J., Pineiro, M.M., Lugo, L. Characterization and measurements of

thermal conductivity, density and rheological properties of zinc oxide nanoparticles dispersed in (ethane-1,2-diol + water) mixture (2013) Journal of Chemical Thermodynamics, 58, pp. 405-415. DOI: https://doi.org/10.1016/j.jct.2012.10.014

173. Wu, Jia-Ling, Lin, Han-Yu, Chen, Yu-Cheng Effects of ZnO Buffer Layer on Characteristics of ZnO:Ga

Films Grown on Flexible Substrates: Investigation of Surface Energy, Electrical, Optical, and

20

Structural Properties (2013) ECS Journal of Solid State Science and Technology, 2 (4), pp. 115-119. DOI: https://doi.org/10.1149/2.007304jss

174. Vogel-Schäuble, N., Romanyuk, Y.E., Yoon, S., Saji, K.J., Populoh, S., Pokrant, S., Aguirre, M.H.,

Weidenkaff, A. Thermoelectric properties of nanostructured Al-substituted ZnO thin films (2012) Thin Solid Films, 520 (23), pp. 6869-6875. DOI: https://doi.org/10.1016/j.tsf.2012.07.046

175. Igamberdiev, K.T.,Yuldashev, S.U., Kang, T.W., Pelenovich, V.O., Rakhimova, S.M., Akhmedov, T.K.

Thermal properties of manganese-doped ZnO polycrystalline films (2012) Physics of the Solid State, 54 (10), Pp.1957-1960. DOI: https://doi.org/10.1134/S1063783412100150

176. Xu, Y., Goto, M., Kato, R., Tanaka, Y., Kagawa, Y. Thermal conductivity of ZnO thin film produced by

reactive sputtering (2012) Journal of Applied Physics, 111 (8), art. no. 084320. DOI: https://doi.org/10.1063/1.4706569

177. Bui, C.T., Xie, R., Zheng, M., Zhang, Q., Sow, C.H., Li, B., Thong, J.T.L. Diameter-dependent thermal

transport in individual ZnO nanowires and its correlation with surface coating and defects (2012) Small, 8 (5), pp. 738-745. DOI: https://doi.org/10.1002/smll.201102046.

178. Bojesen, E.D., Sondergaard, M., Christensen, M., Iversen, B.B. Particle Size Effects on the Thermal

Conductivity of ZnO (2012) 9th European Conference on Thermoelectrics (ECT2011) Book Series: AIP Conference Proceedings, 1449 Pp. 335-338. DOI: https://doi.org/10.1063/1.4731565

179. Huang, Z.X., Tang, Z.A., Yu, J., Bai, S. Thermal conductivity of nanoscale polycrystalline ZnO thin films (2011) Physica B: Condensed Matter, 406 (4), pp. 818-823. DOI: https://doi.org/10.1016/j.physb.2010.11.099

Citas B

[31] Cervantes-López J. L., Rangel R., Espino J., Martínez E., García-Gutiérrez R., Bartolo-Pérez P., Alvarado-Gil J. J., Contreras O. E., Photoluminescence on cerium-doped ZnO nanorods produced under sequential atomic layer deposition–hydrothermal processes. APPLIED PHYSICS A (2017) Volume: 123, issue: 1, Pp.86. DOI: https://doi.org/10.1007/s00339-016-0722-3

18.-Microstructural and mechanical characterization of Al-MWCNT composites produced by mechanical milling By: Perez-Bustamante R, Gomez-Esparz CD, Estrada-Guel I, Miki-Yoshida M, Licea-Jimenez L, Perez-Garcia SA, Martinez-Sanchez R. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING Volume: 502 Issue: 1-2 Pages: 159-163 Published: FEB 25 2009 CITAS A

180. Hasanzadeh-Aghdam, MK., Anari, R., Mahmoodi, MJ. Thermal expanding behavior of carbon nanotube-reinforced metal matrix nanocomposites-A micromechanical modeling. JOURNAL OF ALLOYS AND COMPOUNDS, (2018) 744, pp. 637-650. DOI: https://doi.org/10.1016/j.jallcom.2018.02.100

181. Hasanzadeh-Aghdam, MK., Anari, R., Mahmoodi, MJ. Micromechanical estimation of biaxial thermomechanical responses of hybrid fiber-reinforced metal matrix nanocomposites containing carbon nanotubes MECHANICS OF MATERIALS, (2018) 119, pp. 1-15. DOI: https://doi.org/10.1016/j.mechmat.2018.01.002

182. Chen, ML., Fan, GL., Tan, ZQ., Xiong, DB., Guo, Q., Su, YS., Zhang, J., Li, ZQ., Naito, M., Zhang, D. Design of an efficient flake powder metallurgy route to fabricate CNT/6061Al composites MATERIALS & DESIGN, (2018)142, pp- 288-296. DOI: https://doi.org/10.1016/j.matdes.2018.01.044

21

183. Shin, SE., Bae, DH. Fatigue behavior of Al2024 alloy-matrix nanocomposites reinforced with multi-

walled carbon nanotubes COMPOSITES PART B-ENGINEERING, (2018) 134, pp. 61-68. DOI: https://doi.org/10.1016/j.compositesb.2017.09.034

184. Saboori, A., Pavese, M., Badini, C., Fino, P. A Novel Approach to Enhance the Mechanical Strength and Electrical and Thermal Conductivity of Cu-GNP Nanocomposites METALLURGICAL AND MATERIALS TRANSACTIONS A - PHYSICAL METALLURGY AND MATERIALS SCIENCE, (2018) 49A, pp. 333-345. DOI: https://doi.org/10.1007/s11661-017-4409-y

185. Liang, J., Li, H., Qi, L., Tian, WL., Li, XF., Chao, XJ., Wei, JF. Fabrication and mechanical properties of CNTs/Mg composites prepared by combining friction stir processing and ultrasonic assisted extrusion JOURNAL OF ALLOYS AND COMPOUNDS, (2017) 728, pp. 282-288. DOI: https://doi.org/10.1016/j.jallcom.2017.09.009

186. Han, GQ., Du, WB., Ye, XX., Liu, K., Du, X., Wang, ZH., Li, SB. Compelling mechanical properties of carbon nanotubes reinforced pure magnesium composite by effective interface bonding of Mg2Ni JOURNAL OF ALLOYS AND COMPOUNDS, (2017) 727, pp. 963-969. DOI: https://doi.org/10.1016/j.jallcom.2017.08.133

187. Rikhtegar, F.; Shabestari, S. G.; Saghafian, H. Microstructural evaluation and mechanical properties of Al-CNT nanocomposites produced by different processing methods JOURNAL OF ALLOYS AND COMPOUNDS, (2017) 723, pp. 633-641. DOI: https://doi.org/10.1016/j.jallcom.2017.06.222

188. Azarniya, A., Safavi, MS., Sovizi, S., Azarniya, A., Chen, B., Hosseini, HRM., Ramakrishna, S. Metallurgical Challenges in Carbon Nanotube-Reinforced Metal Matrix Nanocomposites METALS, (2017) 7, Article Number: 384. DOI: https://doi.org/10.3390/met7100384

189. Azarniya, A., Azarniya, A., Sovizi, S., Hosseini, HRM., Varol, T., Kawasaki, A., Ramakrishna, S. Physicomechanical properties of spark plasma sintered carbon nanotube-reinforced metal matrix nanocomposites PROGRESS IN MATERIALS SCIENCE, (2017) 90, pp. 276-324. DOI: https://doi.org/10.1016/j.pmatsci.2017.07.007

190. Roh, A., Um, HY., Kim, D., Nam, S., Kim, HS., Choi, H. Influence of high-pressure torsion and hot rolling on the microstructure and mechanical properties of aluminum-fullerene composites JOURNAL OF MATERIALS SCIENCE, (2017) 52, pp. 11988-12000. DOI: https://doi.org/10.1007/s10853-017-1230-3

191. Pillari, LK., Shukla, AK., Murty, SVSN., Umasankar, V. Processing and Characterization of Graphene and Multi-wall Carbon Nanotube-Reinforced Aluminium Alloy AA2219 Composites Processed by Ball Milling and Vacuum Hot Pressing METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, (2017) 6, pp. 289-303. DOI: https://doi.org/10.1007/s13632-017-0365-6

192. Salama, EI., Abbas, A., Esawi, AMK. Preparation and properties of dual-matrix carbon nanotube-reinforced aluminum composites COMPOSITES PART A - APPLIED SCIENCE AND MANUFACTURING, (2017) 99, pp. 84-93. DOI: https://doi.org/10.1016/j.compositesa.2017.04.002

193. Hassanzadeh-Aghdam, MK., Mahmoodi, MJ. A comprehensive analysis of mechanical characteristics of carbon nanotube-metal matrix nanocomposites MATERIALS SCIENCE AND ENGINEERING A -STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, (2017) 701, pp. 34-44. DOI: https://doi.org/10.1016/j.msea.2017.06.066

194. Li, SS., Su, YS., Jin, HL., Huang, Y., Ouyang, QB., Zhang, D. Effects of carbon nanotube content on morphology of SiCp(CNT) hybrid reinforcement and tensile mechanical properties of SiCp(CNT)/Al composites JOURNAL OF MATERIALS RESEARCH, (2017) 32, pp. 1239-1247. DOI: https://doi.org/10.1557/jmr.2017.12

195. Chen, B., Shen, J., Ye, X., Imai, H., Umeda, J., Takahashi, M., Kondoh, K. Solid-state interfacial reaction and load transfer efficiency in carbon nanotubes (CNTs)-reinforced aluminum matrix composites CARBON, (2017) 114, pp. 198-208. DOI: https://doi.org/10.1016/j.carbon.2016.12.013

22

196. Ogawa, F., Masuda, C. Interface Observation of Aluminum-Coated Carbon Nanofibers Prepared by

in Situ Chemical Vapor Deposition JOURNAL OF PHYSICAL CHEMISTRY C, (2017) 121, pp. 6126-6132. DOI: https://doi.org/10.1021/acs.jpcc.6b12956

197. Shirvanimoghaddam, K., Hamim, SU., Akbari, MK., Fakhrhoseini, SM., Khayyam, H., Pakseresht, AH., Ghasali, E., Zabet, M., Munir, KS., Jia, SA., Davim, JP., Naebe, M. Carbon fiber reinforced metal matrix composites: Fabrication processes and properties. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, (2017) 92, pp. 70-96. DOI: https://doi.org/10.1016/j.compositesa.2016.10.032

198. Saboori, A., Moheimani, SK., Pavese, M., Badini, C., Fino, P. New Nanocomposite Materials with Improved Mechanical Strength and Tailored Coefficient of Thermal Expansion for Electro-Packaging Applications. METALS, (2017) 7, Article Number 536. DOI: https://doi.org/10.3390/met7120536

199. Rikhtegar, F., Shabestari, S. G., Saghafian, H. Synthesis of Carbon Nanotube-Reinforced Al2024 Matrix

Nanocomposite Using Flake Powder Metallurgy Method. METALLURGICAL AND MATERIALS TRANSACTIONS A - PHYSICAL METALLURGY AND MATERIALS SCIENCE, (2016) 47A, pp. 6428-6437. DOI: https://doi.org/10.1007/s11661-016-3772-4

200. Joo, M. R., Choi, H. J., Shin, S. E., et al. Effect of wrapped Zn plate on the densification of Al-MWCNTs composites produced by cold pressing and liquid phase sintering. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, (2016) 674, pp. 91-97. DOI: https://doi.org/10.1016/j.msea.2016.07.122

201. Liu, WQ., Cao, CZ, Xu, JQ., Wang, XJ., Li, XC. Molten salt assited solidification nanoprocessing of Al-TiC nanocmposites. MATERIALS LETTERS, (2016) 185, pp. 392-395. DOI: https://doi.org/10.1016/j.matlet.2016.09.023

202. So, KP., Liu, XH., Mori, H., Kushima, A., Park, JG., Kim, HS., Ogata, S., Lee, YH., Li, J. Ton-scale metal-carbon nanotube composite: The mechanism of strengthening while retaining tensile ductility. EXTREME MECHANICS LETTERS, (2016) 8, pp. 245-250. DOI: https://doi.org/10.1016/j.eml.2016.04.002

203. Zhu X., Zhao Y.G., Wu M., Wang H.Y., Jiang Q.C., Fabrication of 2014 aluminum matrix composites reinforced with untreated and carboxyl-functionalized carbon nanotubes. JOURNAL OF ALLOYS AND COMPOUNDS, (2016) 674, pp. 145-152. DOI: https://doi.org/10.1016/j.jallcom.2016.03.036

204. Jeyasimman, D.; Narayanasamy, R. Effect of coarse grain content on microstructure, cold workability and strain hardening behavior of trimodaled AA 6061 nanocomposites reinforced with multi-walled carbon nanotubes. ADVANCED POWDER TECHNOLOGY, (2016) 27, pp. 1845-1851. DOI: https://doi.org/10.1016/j.apt.2016.06.018

205. Ilyas I., Tunc T.M., Dry sliding wear behavior of aluminum graphene nanoplatelet (GNP) composites. MATERIALS TESTING, (2016) 58, pp. 640-643. DOI: https://doi.org/10.3139/120.110895

206. Yang, Xudong., Zou, Tianchun., Shi, Chunsheng., Luy, EZ., Hem CN., Zhao, NQ. Effect of carbon nanotube (CNT) content on the properties of in-situ synthesis CNT reinforced Al composites MATERIALS SCIENCE AND ENGINEERING A - STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, (2016) 660, pp.11-18. DOI: https://doi.org/10.1016/j.msea.2016.02.062

207. Carvalho, O., Buciumeanu, M., Madeira, S., Soares, D., Silva, FS., Miranda, G. Mechanisms governing the mechanical behavior of an AlSi-CNTs-SiCp hybrid composite COMPOSITES PART B - ENGINEERING, (2016) 90, pp. 443-449. DOI: https://doi.org/10.1016/j.compositesb.2016.01.032

208. Zhang, H., Xu, C., Xiao, W., Ameyama, K., Ma, CL. Enhanced mechanical properties of Al5083 alloy with graphene nanoplates prepared by ball milling and hot extrusion (2017) MATERIALS SCIENCE AND ENGINEERING A- STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 658, pp. 8-15. DOI: https://doi.org/10.1016/j.msea.2016.01.076

23

209. Ostovan, F., Matori, KA., Toozandehjani, M., Oskoueaian, A., Yusoff, HM., Yunus, R., Ariff, AHM. Nanomechanical Behavior of Multi-Walled Carbon Nanotubes Particulate Reinforced Aluminum Nanocomposites Prepared by Ball Milling (2016) Materials, 9, Article Number 140. DOI: https://doi.org/10.3390/ma9030140

210. Wang, Lin-zhi, Liu, Ying, Wei, Wen-hou, Xu-guan, An, Zhang, Taho, Ya-yun, Pu. Preparation of CNT/AlSi10Mg composite powders by high-energy ball milling and their physical properties INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, (2016) 23, pp. 330-338. DOI: https://doi.org/10.1007/s12613-016-1242-z

211. Rashad, M., Pan, F., Lin, D., Asif, M. High temperature mechanical behavior of AZ61 magnesium alloy reinforced with graphene nanoplatelets MATERIALS & DESIGN, (2016) 89, pp. 1242-1250. DOI: https://doi.org/10.1016/j.matdes.2015.10.101

212. Chen, B., Kondoh, K., Imai, H., Umeda, J. Effect of initial state on dispersion evolution of carbon nanotubes in aluminium matrix composites during a high-energy ball milling process POWDER METALLURGY, (2016) 59, pp. 216-222. DOI: https://doi.org/10.1080/00325899.2016.1144375

213. Carvalho, O., Cuciumeanu, M., Miranda, G., Costa, N., Soares, D., Silva, FS. Mechanisms governing the tensile, fatigue, and wear behavior of carbon nanotube reinforced aluminum alloy MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, (2016) 23, pp. 917-925. DOI: https://doi.org/10.1080/15376494.2015.1063176

214. Zhou, X., Song, S., Li, L., Zhang, RJ. Molecular dynamics simulation for mechanical properties of magnesium matrix composites reinforced with nickel-coated single-walled carbon nanotubes JOURNAL OF COMPOSITE MATERIALS, (2016) 50, pp. 191-200. DOI: https://doi.org/10.1177/0021998315572710

215. Housaer, F., Beclin, F., Touzin, M., Tingaud, D., Legris, A., Addad, A. Interfacial characterization in carbon nanotube reinforced aluminum matrix composites MATERIALS CHARACTERIZATION, (2015) 110, pp. 94-101. DOI: https://doi.org/10.1016/j.matchar.2015.10.014

216. Munir, KS., Qian, M., Li, YC., Oldfield, DT., Kingshott, P., Zhu, DM., Wen, C. Quantitative Analyses of MWCNT-Ti Powder Mixtures using Raman Spectroscopy: The Influence of Milling Parameters on Nanostructural Evolution ADVANCED ENGINEERING MATERIALS, (2015) 17, pp. 1660-1669. DOI: https://doi.org/10.1002/adem.201500142

217. Zhang, SF., Che, GQ., Pei, RS., Wang, YP., Li, DG., Wang, PP. Wu, GH. Effect of Y content on interfacial microstructures and mechanical properties of C-f/Mg composite MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, (2015) 647, pp. 105-112. DOI: https://doi.org/10.1016/j.msea.2015.08.076

218. Carvalho, O., Buciumeanu, M., Madeira, S., Soares, D., Silva, FS., Miranda, G. Dry sliding wear behaviour of AlSi-CNTs-SiCp hybrid composites (2015) TRIBOLOGY INTERNATIONAL, 90, pp. 148-156. DOI: https://doi.org/10.1016/j.triboint.2015.04.031

219. Ostovan, F., Matori, KA., Toozandehjani, M., Oskoueaian, A., Yussof, HM., Yunus, R., Ariff, AHM., Quan, HJ., Lim, WF. Effects of CNTs content and milling time on mechanical behavior of MWCNT-reinforced aluminum nanocomposites MATERIALS CHEMISTRY AND PHYSISCS, (2015) 166, pp. 160-166. DOI: https://doi.org/10.1016/j.matchemphys.2015.09.041

220. Rikhtegar, F., Shbestari, SG., Saghafian, H. The homogenizing of carbon nanotube dispersion in aluminium matrix nanocomposite using flake powder metallurgy and ball milling methods POWDER TECHNOLOGY, (2015) 280, pp. 26-34. DOI: https://doi.org/10.1016/j.powtec.2015.04.047

221. Jeyasimman, D., Narayanasamy, R., Polalagusamy, R. Role of hybrid reinforcement on microstructural observation, characterization and consolidation behavior of AA 6061 nanocomposite ADVANCED POWDER TECHNOLOGY, (2015) 26, pp. 1171-1182. DOI: https://doi.org/10.1016/j.apt.2015.05.013

24

222. Nosbi, N. Akril, HM. Controlling the number of walls in multi walled carbon nanotubes/alumina hybrid compound via ball milling of precipitate catalyst APPLIED SURFACE SCIENCE, (2015) 340, 78-88. DOI: https://doi.org/10.1016/j.apsusc.2015.02.095

223. Carvalho, O., Buciumeanu, M., Soares, D., Silva, FS., Miranda, G. Evaluation of CNT Dispersion Methodology Effect on Mechanical Properties of an AlSi Composite JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, (2015) 24, pp.2535-2545. DOI: https://doi.org/10.1007/s11665-015-1510-5

224. Chen, BA., Li, SF., Imai, H., Jian, L., Umeda, J. Takashahi, M. Kondoh, K. An approach for homogeneous carbon nanotube dispersion in Al matrix composites MATERIALS & DESIGN, (2015) 72, pp. 1-8. DOI: https://doi.org/10.1016/j.matdes.2015.02.003

225. Meng, X., Liu, T., Shi, CS., Liu, EZ., He, CN., Zhao, NQ. Synergistic effect of CNTs reinforcement and precipitation hardening in in-situ CNTs/Al-Cu composites MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, (2015) 633, pp. 103-111. DOI: https://doi.org/10.1016/j.msea.2015.03.007

226. Rashad, M., Pan, FS., Tang, AT., Asif, M., Hussain, S., Gou, J., Mao, JJ. Improved strength and ductility

of magnesium with addition of aluminum and graphene nanoplatelets (Al plus GNPs) using semi powder metallurgy method JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, (2015) 23, pp. 243-250. DOI: https://doi.org/10.1016/j.jiec.2014.08.024

227. Han, GQ., Wang, ZH., Liu, R., Li, SB., Du, X., Du, WB. Synthesis of CNT-reinforced AZ31 magnesium alloy composites with uniformly distributed CNTs MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, (2015) 628, pp. 350-357. DOI: https://doi.org/10.1016/j.msea.2015.01.039

228. Liu, HL., Chai, YC., Huang, CZ., Liu, HH., Wang, J. Effect of boron nitride nanotubes content on mechanical properties and microstructure of Ti (C,N)-based cermets CERAMICS INTERNATIONAL, (2015) 41, pp. 2813-2818. DOI: https://doi.org/10.1016/j.ceramint.2014.10.101

229. Rashad, M., Pan, FS., Tang, AT., Asif, M., She, J., Gou, J., Mao, JJ., Hu, HH. Development of magnesium-graphene nanoplatelets composite. JOURNAL OF COMPOSITE MATERIALS, (2015) 49, pp. 285-293. DOI: https://doi.org/10.1177/0021998313518360

230. Ogawa, F., Masuda, C. Fabrication of carbon nanofiber-reinforced aluminum matrix composites assisted by aluminum coating formed on nanofiber surface by in situ chemical vapor deposition MATERIALS RESEARCH EXPRESS, (2015) 2, Pp. 015601. DOI: https://doi.org/10.1088/2053-1591/2/1/015601

231. Carvalho, O., Buciumeanu, M., Soares, D., Gomes, J., Silva, FS. Improvement on Sliding Wear Behavior of Al/Cast Iron Tribopair by CNT's Reinforcement of an Al Alloy TRIBOLOGY TRANSACTIONS, (2015) 58, pp. 643-653. DOI: https://doi.org/10.1080/10402004.2014.1002143

232. Khorasani, S., Heshmati-Manesh, S., Abdizadeh, H. Improvement of mechanical properties in aluminum/CNTs nanocomposites by addition of mechanically activated graphite COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, (2015) 68, pp. 177-183. DOI: https://doi.org/10.1016/j.compositesa.2014.10.009

233. Basariya, MR., Srivastava, VC., Mukhopadahyay, NK. Microstructural characteristics and mechanical properties of carbon nanotube reinforced aluminum alloy composites produced by ball milling MATERIALS & DESIGN, (2014) 64, pp. 542-549. DOI: https://doi.org/10.1016/j.matdes.2014.08.019

234. Ramasamy, N., Thangasamy, S., Ramalingam, RJ. MWCNT/Alumina Nanocomposite Characterization and Toughening Mechanism of Uniform Dispersion SYNTHESIS AND REACTIVITIY IN INORGANIC METAL-ORGANIN AND NANO-METAL CHEMISTRY, (2014) 44, pp. 1050-1053. DOI: https://doi.org/10.1080/15533174.2013.797466

25

235. Chen, B., Jia, L., Li, SF., Imai, H., Takahashi, M., Kondo, K. In Situ Synthesized Al4C3 Nanorods with Excellent Strengthening Effect in Aluminum Matrix Composites ADVANCED ENGINEERING MATERIALS, (2014) 16, pp. 972-975. DOI: https://doi.org/10.1002/adem.201400232

236. Choi, K., Seo, J., Bae, D., Choi, H. Mechanical properties of aluminum-based nanocomposite reinforced with fullerenes TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, (2014) 24, pp. S47-S52. DOI: https://doi.org/10.1016/S1003-6326(14)63287-8

237. Shin, SE., Choi, HJ., Bae, DH. Micro-alloying assisted consolidation of aluminum/carbon nanotubes powder MATERIALS SCEINCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, (2014) 599, pp. 46-50. DOI: https://doi.org/10.1016/j.msea.2014.01.07

238. Boesl, B., Lahiri, D., Behdad, S., Agarwal, A. Direct observation of carbon nanotube induced strengthening in aluminum composite via in situ tensile tests CARBON, (2014) 69, pp. 79-85. DOI: https://doi.org/10.1016/j.carbon.2013.11.061

239. Chandran, P., Sirimuvva, T., Nayan, N., Shukla, Ak., Murty, SVSN, Pramod, SL., Sharma, SC., Bakshi, SR. Effect of Carbon Nanotube Dispersion on Mechanical Properties of Aluminum-Silicon Alloy Matrix Composites JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, (2014) 23, pp. 1028-1037. DOI: https://doi.org/10.1007/s11665-013-0835-1

240. Bradbury, C.R., Gomon, J.-K., Kollo, L., Kwon, H., Leparoux, M. Hardness of Multi Wall Carbon Nanotubes reinforced aluminium matrix composites JOURNAL OF ALLOYS AND COMPOUNDS, (2014) 585, pp. 362-367. DOI: https://doi.org/10.1016/j.jallcom.2013.09.142

241. Fattahi, M., Nabhani, N., Rashidkhani, E., Fattahi, Y., Akhavan, S., Arabian, N. A new technique for the strengthening of aluminum tungsten inert gas weld metals: Using carbon nanotube/aluminum composite as a filler metal MICRON, (2013) 54-55, pp. 28-35. DOI: https://doi.org/10.1016/j.micron.2013.07.004

242. Maqbool, A., Hussain, M.A., Khalid, F.A., Bakhsh, N., Hussain, A., Kim, M.H. Mechanical characterization of copper coated carbon nanotubes reinforced aluminum matrix composites MATERIALS CHARACTERIZATION, (2013) 86, pp. 39-48. DOI: https://doi.org/10.1016/j.matchar.2013.09.006

243. Yue, G., Cai, X.-L., Wang, K.-J., Sun, H.-P., Chen, Y.-G. Interface reaction of CNTs/Al composites fabricated by high energy ball milling (2013) ADVANCED MATERIALS RESEARCH, 750-752, pp. 90-94. DOI: https://doi.org/10.4028/www.scientific.net/AMR.750-752.90

244. Tjong, S.C. Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets MATERIALS SCIENCE AND ENGINEERING R: REPORTS, (2013) 74 (10), pp. 281-350. DOI: https://doi.org/10.1016/j.mser.2013.08.001

245. Zhu, S.-E., Li, F., Wang, G.-W. Mechanochemistry of fullerenes and related materials CHEMICAL SOCIETY REVIEWS, (2013) 42 (18), pp. 7535-7570. DOI: https://doi.org/10.1039/C3CS35494F

246. Shin, S.E., Bae, D.H. Strengthening behavior of chopped multi-walled carbon nanotube reinforced aluminum matrix composites MATERIALS CHARACTERIZATION, (2013) 83, pp. 170-177. DOI: https://doi.org/10.1016/j.matchar.2013.05.018

247. Yang, X., Liu, E., Shi, C., He, C., Li, J., Zhao, N., Kondoh, K. Fabrication of carbon nanotube reinforced Al composites with well-balanced strength and ductility JOURNAL OF ALLOYS AND COMPOUNDS, (2013) 563, pp. 216-220. DOI: https://doi.org/10.1016/j.jallcom.2013.02.066

248. Wu, K., Zha, W., Jia, Y., An, X. Effect of mechanical milling on preparing carbon nanotubes aluminum base oil-impregnated bearing FENMO YEJIN JISHU/POWDER METALLURGY TECHNOLOGY, (2013) 31, pp. 128-131.

26

249. Mobasherpour, I., Tofigh, A.A., Ebrahimi, M. Effect of nano-size Al2O3 reinforcement on the mechanical behavior of synthesis 7075 aluminum alloy composites by mechanical alloying (2013) MATERIALS CHEMISTRY AND PHYSICS, 138 (2-3), pp. 535-541. DOI: https://doi.org/10.1016/j.matchemphys.2012.12.015

250. Chu, K., Jia, C.-C., Jiang, L.-K., Li, W.-S. Improvement of interface and mechanical properties in carbon nanotube reinforced Cu-Cr matrix composites MATERIALS AND DESIGN, (2013) 45, pp. 407-411. DOI: https://doi.org/10.1016/j.matdes.2012.09.027

251. Yoo, S.J., Han, S.H., Kim, W.J. Strength and strain hardening of aluminum matrix composites with randomly dispersed nanometer-length fragmented carbon nanotubes SCRIPTA MATERIALIA, (2013) 68 (9), pp. 711-714. DOI: https://doi.org/10.1016/j.scriptamat.2013.01.013

252. Patel, R.B., Liu, J., Scicolone, J.V., Roy, S., Mitra, S., Dave, R.N., Iqbal, Z. Formation of stainless steel-carbon nanotube composites using a scalable chemical vapor infiltration process JOURNAL OF MATERIALS SCIENCE, (2013) 48 (3), pp. 1387-1395. DOI: https://doi.org/10.1007/s10853-012-6885-1

253. Ram, H.R.A., Koppad, P.G., Kashyap, K.T. Nanoindentation studies on MWCNT/aluminum alloy 6061 nanocomposites MATERIALS SCIENCE AND ENGINEERING A, (2013) 559, pp. 920-923. DOI. https://doi.org/10.1016/j.msea.2012.08.143

254. Junhao, L., Hejun, L., Sanxu, C., Jianfeng, W., Lehua, Q. Effect of magnetic field on microstructure of carbon nanotube reinforced Mg matrix composites 2012 International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, (2012) 3M-NANO 2012 - Conference Proceedings, art. no. 6472960, pp. 308-311.

255. Lahiri, D., Singh, V., Li, L.H., Xing, T., Seal, S., Chen, Y., Agarwal, A. Insight into reactions and interface between boron nitride nanotube and aluminum JOURNAL OF MATERIALS RESEARCH, (2012) 27 (21), pp. 2760-2770. DOI: https://doi.org/10.1557/jmr.2012.294

256. Majid, M., Majzoobi, G.H., Noozad, G.A., Reihani, A., Mortazavi, S.Z., Gorji, M.S. Fabrication and mechanical properties of MWCNTs-reinforced aluminum composites by hot extrusión RARE METALS, (2012) 31 (4), pp. 372-378. DOI: https://doi.org/10.1007/s12598-012-0523-6

257. Choi, H.J., Shin, J.H., Bae, D.H. The effect of milling conditions on microstructures and mechanical properties of Al/MWCNT composites COMPOSITES PART A: APPLIED SCIENCE AND MANUFACTURING, (2012) 43 (7), pp. 1061-1072. DOI: https://doi.org/10.1016/j.compositesa.2012.02.008

258. Gubicza, J. Defect structure in nanomaterials (2012) WHOODHEAD PUBLISHING in Mechanical Engineering, ELSEVIER pp. 231-261. eBook ISBN: 9780857096142. https://www.elsevier.com/books/defect-structure-in-nanomaterials/gubicza/978-0-85709-206-9

259. Cao, L., Li, Z., Fan, G., Jiang, L., Zhang, D., Moon, W.-J., Kim, Y.-S. The growth of carbon nanotubes in aluminum powders by the catalytic pyrolysis of polyethylene glycol CARBON, (2012) 50 (3), pp. 1057-1062. DOI: https://doi.org/10.1016/j.carbon.2011.10.011

260. Robles Hernández, F.C., Calderon, H.A. Nanostructured Al/Al 4C 3 composites reinforced with graphite or fullerene and manufactured by mechanical milling and spark plasma sintering MATERIALS CHEMISTRY AND PHYSICS, (2012) 132 (2-3), pp. 815-822. DOI: https://doi.org/10.1016/j.matchemphys.2011.12.017

261. Luo, X.-T., Yang, G.-J., Li, C.-J. Preparation of cBNp/NiCrAl nanostructured composite powders by a step-fashion mechanical alloying process POWDER TECHNOLOGY, (2012) 217, pp. 591-598. DOI: https://doi.org/10.1016/j.powtec.2011.11.029

262. Wu, Y., Kim, G.-Y., Russell, A.M. Mechanical alloying of carbon nanotube and Al6061 powder for metal matrix composites MATERIALS SCIENCE AND ENGINEERING A, (2012) 532, pp. 558-566. DOI: https://doi.org/10.1016/j.msea.2011.10.121

27

263. Singhal, S.K., Pasricha, R., Teotia, S., Kumar, G., Mathur, R.B. Fabrication and characterization of Al-matrix composites reinforced with amino-functionalized carbon nanotubes (2011) COMPOSITES SCIENCE AND TECHNOLOGY, 72 (1), pp. 103-111. DOI: https://doi.org/10.1016/j.compscitech.2011.10.007

264. Yang, X.D., Zhao, N.Q., Shi, C.S., Liu, E.Z., He, C.N., Li, J.J. Synthesis of carbon nanotube reinforcement in aluminum powder by in situ chemical vapor deposition (2011) ICCM 18th INTERNATIONAL CONFERENCES ON COMPOSITE MATERIALS, 4 p. http://www.iccm-central.org/Proceedings/ICCM18proceedings/data/2.%20Oral%20Presentation/Aug25%28Thursday%29/Th01%20Nanocomposites/Th01-3-IF1034.pdf

265. Singhal, S.K., Srivastava, A.K., Pasricha, R., Mathur, R.B. Fabrication of al-matrix composites reinforced with amino functionalized boron nitride nanotubes (2011) JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 11 (6), pp. 5179-5186. DOI: https://doi.org/10.1166/jnn.2011.4182.

266. Hendrik, Han, K.H. Consolidation of mechanically milled Al-MWCNT nano-composite by the conventional powder metallurgy processing (2011) ICCM 18th INTERNATIONAL CONFERENCES ON COMPOSITE MATERIALS, 6 p. http://www.iccm-central.org/Proceedings/ICCM18proceedings/data/2.%20Oral%20Presentation/Aug23(Tuesday)/T41%20Metal%20Matrix%20Composites/T41-4-IK1040.pdf

267. Nie, J.-H., Jia, C.-C., Shi, N., Zhang, Y.-F., Li, Y., Jia, X. Aluminum matrix composites reinforced by molybdenum-coated carbon nanotubes INTERNATIONAL JOURNAL OF MINERALS, METALLURGY AND MATERIALS, (2011) 18 (6), pp. 695-702. DOI: 10.1007/s12613-011-0499-5

268. Kurita, H., Kwon, H., Estili, M., Kawasaki, A. Multi-walled carbon nanotube-aluminum matrix composites prepared by combination of hetero-agglomeration method, spark plasma sintering and hot extrusion MATERIALS TRANSACTIONS, (2011) 52 (10), pp. 1960-1965. DOI: https://doi.org/10.2320/matertrans.M2011146

269. Yang, X., Shi, C., He, C., Liu, E., Li, J., Zhao, N. Synthesis of uniformly dispersed carbon nanotube reinforcement in Al powder for preparing reinforced Al composites COMPOSITES PART A: APPLIED SCIENCE AND MANUFACTURING, (2011) 42 (11), pp. 1833-1839. DOI: https://doi.org/10.1016/j.compositesa.2011.08.009

270. Nie, J., Jia, C., Jia, X., Zhang, Y., Shi, N., Li, Y. Fabrication, microstructures, and properties of copper matrix composites reinforced by molybdenum-coated carbon nanotubes RARE METALS, (2011) 30 (4), pp. 401-407. DOI: https://doi.org/10.1007/s12598-011-0404-4

271. Bakshi, S.R., Keshri, A.K., Agarwal, A. A comparison of mechanical and wear properties of plasma sprayed carbon nanotube reinforced aluminum composites at nano and macro scale MATERIALS SCIENCE AND ENGINEERING A, (2011) 528 (9), pp. 3375-3384. DOI: https://doi.org/10.1016/j.msea.2011.01.061

272. Kurita, H., Kwon, H., Kawasaki, A. Fabrication of carbon nanotube reinforced aluminum matrix composite by spark plasma sintering and hot extrusion hybrid process NIPPON KINZOKU GAKKAISHI/JOURNAL OF THE JAPAN INSTITUTE OF METALS, (2011) 75 (4), pp. 259-264. DOI: https://doi.org/10.2320/jinstmet.75.259

273. Habibi, M.K., Paramsothy, M., Hamouda, A.M.S., Gupta, M. Using integrated hybrid (Al+CNT) reinforcement to simultaneously enhance strength and ductility of magnesium COMPOSITES SCIENCE AND TECHNOLOGY, (2011) 71 (5), pp. 734-741. DOI: https://doi.org/10.1016/j.compscitech.2011.01.021

274. Liao, J., Tan, M.-J. Mixing of carbon nanotubes (CNTs) and aluminum powder for powder metallurgy use POWDER TECHNOLOGY, (2011) 208 (1), pp. 42-48. DOI: https://doi.org/10.1016/j.powtec.2010.12.001

28

275. Bakshi, S.R., Agarwal, A. An analysis of the factors affecting strengthening in carbon nanotube reinforced aluminum composites CARBON, (2011) 49 (2), pp. 533-544. DOI: https://doi.org/10.1016/j.carbon.2010.09.054

276. Li, Q., Rottmair, C.A., Singer, R.F. CNT reinforced light metal composites produced by melt stirring and by high pressure die casting COMPOSITES SCIENCE AND TECHNOLOGY, (2010) 70 (16), pp. 2242-2247. DOI: https://doi.org/10.1016/j.compscitech.2010.05.024

277. Choi, H.J., Lee, S.M., Bae, D.H. Wear characteristic of aluminum-based composites containing multi-walled carbon nanotubes WEAR, (2010) 270 (1-2), pp. 12-18. DOI: https://doi.org/10.1016/j.wear.2010.08.024

278. Senthil Saravanan, M.S., Sivaprasad, K., Kumaresh Babu, S.P., Susila, P., Murty, B.S. Synthesis and characterization of CNT reinforced AA4032 nanocomposites by high energy ball milling (2010) AIP CONFERENCE PROCEEDINGS, 1276, pp. 82-87. DOI: https://doi.org/10.1063/1.3504346

279. Choi, H.J., Shin, J.H., Bae, D.H. Self-assembled network structures in Al/C60 composites CARBON, (2010) 48 (13), pp. 3700-3707. DOI: https://doi.org/10.1016/j.carbon.2010.06.013

280. Ahamed, H., Senthilkumar, V. Role of nano-size reinforcement and milling on the synthesis of nano-crystalline aluminium alloy composites by mechanical alloying JOURNAL OF ALLOYS AND COMPOUNDS, (2010) 505 (2), pp. 772-782. DOI: https://doi.org/10.1016/j.jallcom.2010.06.139

281. Kondoh, K., Fukuda, H., Umeda, J., Imai, H., Fugetsu, B., Endo, M. Microstructural and mechanical analysis of carbon nanotube reinforced magnesium alloy powder composites MATERIALS SCIENCE AND ENGINEERING A, (2010) 527 (16-17), pp. 4103-4108. DOI: https://doi.org/10.1016/j.msea.2010.03.049

282. Robles-Hernández, F.C., Calderon, H.A. Nanostructured metal composites reinforced with fullerenes JOM, (2010) 62 (2), pp. 63-68. DOI: https://doi.org/10.1007/s11837-010-0034-6

283. Huang, Z.-M., Wang, X.-F., Chen, L.-S. Development of nanofiber reinforced transparent composites (2009) ICCM International Conferences on Composite Materials. https://pdfs.semanticscholar.org/6557/1056d6c7efc2e6b19b6bf926e77c0d0fd7cc.pdf

284. Li, H., Misra, A., Horita, Z., Koch, C.C., Mara, N.A., Dickerson, P.O., Zhu, Y. Strong and ductile nanostructured Cu-carbon nanotube composite (2009) APPLIED PHYSICS LETTERS, 95 (7), art. no. 071907. DOI: https://doi.org/10.1063/1.3211921

285. Choi, H., Shin, J., Min, B., Park, J., Bae, D. Reinforcing effects of carbon nanotubes in structural aluminum matrix nanocomposites (2009) JOURNAL OF MATERIALS RESEARCH, 24 (8), pp. 2610-2616. DOI: https://doi.org/10.1557/JMR.2009.0318

Citas B

[32] Pérez-Bustamante, R. Gonzalez-Ibarra, MJ., González-Cantu, J., Estrada-Guel, I., Herrera-Ramirez, JM., Miki-Yoshida, M., Martínez-Sanchez, R. AA2024-CNTs composites by milling process after T6-temper condition JOURNAL OF ALLOYS AND COMPOUNDS, (2012) 536, pp. S17-S20. DOI: https://doi.org/10.1016/j.jallcom.2011.12.001

[33] Carreno-Gallardo, C. Estrada-Guel, I., Romero-Romo, M., Cruz-García, R., Lopez-Melendez, C., Martinez-Sanchez, R. Characterization of Al2O3NP-Al-2024 and AgCNP-Al-2024 composites prepared by mechanical processing in a high energy ball mill JOURNAL OF ALLOYS AND COMPOUNDS, (2012) 536, pp. S26-S30. DOI: https://doi.org/10.1016/j.jallcom.2011.12.010

[34] Pérez-Bustamante, R., Pérez-Bustamante, F., Barajas-Villaruel, JI., Herrera-Ramirez, JM., Estrada-Guel, I., Amezaga-Madrid, P., Miki-Yoshida, M., Martínez-Sanchez, R. Dispersion of CNTs in aluminum 2024 alloy

29

by milling process METASTABLE AND NANOSTRUCTURED MATERIALS IV, MATERIALS SCIENCE FORUM, (2011) 691. Pp 27. DOI: https://doi.org/10.4028/www.scientific.net/MSF.691.27

[35] Pérez-Bustamante, R., Estrada-Guel, I., Amezaga-Madrid, P., Miki-Yoshida, M., Herrera-Ramirez, JM., Martinez-Sanchez, R. Microstructural characterization of Al-MWCNT composites produced by mechanical milling and hot extrusion JOURNAL OF ALLOYS AND COMPOUNDS, (2010) 495, pp.399-402. DOI: https://doi.org/10.1016/j.jallcom.2009.10.099

19.- Initial formation of contact layers on Ni/SiC samples studied by XPS By: Pérez-García, S.A., Cao, Y. , Nyborg, L. SURFACE & INTERFACE ANALYSIS Volume: 40, Issue: 8 Pages: 1144- 1148 Published: 2008 CITAS A

286. Yang X., Qi Y., Liu Y., Zhou Y., Chen K., Zhou B., Chenz W., Self-Assembly Growth of 3D WO3 Framework with Interpenetrated Nanosheets as Binder-Free Anode for Lithium Ion Batteries. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, (2017) Volume 164, issue 12, A2783-A2789. DOI: https://doi.org/ 10.1149/2.1891712jes

Citas B

[36] Tam P.L., Cao Y., Jelvestam U., Nyborg L., Corrosion properties of thermally annealed and co-sputtered nickel silicide thin films SURFACE AND COATINGS TECHNOLOGY, (2011) Volume 206, Issue 6, Pp.1160-1167. DOI: https://doi.org/10.1016/j.surfcoat.2011.08.004

20.- Tailoring of nickel silicide contacts on silicon carbide By: Perez-Garcia, S. A.; Nyborg, L. APPLIED SURFACE SCIENCE Volume: 254, Issue: 1, Pages: 135-138 Published: 2007 CITAS A

287. Macháč P., Fidler T., Cichoň S., Jurka V., Synthesis of graphene on Co/SiC structure. JOURNAL OF MATERIALS SCIENCE: MATERIALS IN ELECTRONICS, (2013) Volume 24, Issue 10, Pp. 3793–3799. DOI: https://doi.org/10.1007/s10854-013-1320-1

288. Cichoň, S., Macháč, P., Barda, B., Kudrnová, M., Si ohmic contacts on N-type SiC studied by XPS. MICROELECTRONIC ENGINEERING, (2013) Volume 106, Pp. 132-138. DOI: https://doi.org/10.1016/j.mee.2012.12.019

289. Cichoň, S., MacHáč, P., Barda, B., MacHovič, V., Slepička, P., Raman study of Ni and Ni silicide

contacts on 4H- and 6H-SiC. THIN SOLID FILMS, (2012) Volume 520, Issue 13, Pp. 4378-4388. DOI: https://doi.org/10.1016/j.tsf.2012.02.008

290. Barda, B., MacHáč, P., Cichoň, S., Machovič V., Kudrnová M., Michalcová, A., Siegel, J., Origin of ohmic

behavior in Ni, Ni2Si and Pd contacts on n-type SiC. Applied Surface Science, (2010) Volume 257, Issue 2, Pp. 414-422. DOI: https://doi.org/10.1016/j.apsusc.2010.07.003

21.- Investigation of Ni/Ta contacts on 4H silicon carbide upon thermal annealing. By: Cao, Y., Perez-Garcia S. A., Nyborg L., APPLIED SURFACE SCIENCE Volume: 254, Issue: 1, Pages: 139-142 Published: 2007 CITAS A

30

291. De Silva, M., Ishikawa, S., Miyazaki, T., Kikkawa, T., Kuroki, S.-I. Formation of amorphous alloys on 4H-

SiC with NbNi film using pulsed-laser annealing. APPLIED PHYSICS LETTERS, (2016) Volume: 109, Pp.012101. DOI: https://doi.org/10.1063/1.4955406

292. Cheng Y., Zhao G.-J., Liu Y.-H., Sun Y.-J., Wang T., Chen Z.-Z., Effect of the annealing temperature on the long-term thermal stability of Pt/Si/Ta/Ti/4H-SiC contacts. CHINESE PHYSICS B. (2015) Volume: 24 Issue: 10 Pp. 107303. DOI: https://doi.org/10.1088/1674-1056/24/10/107303

293. Jung K., Sutou Y., Koike J., Improved microstructure and ohmic contact of Nb electrode on n-type

4H-SiC. THIN SOLID FILMS (2012) Volume 520, Issue 23, Pp. 6922-6928. DOI: https://doi.org/10.1016/j.tsf.2012.04.004

294. Triebert A., Matthey B., Martin H.-P., Studies on Ta-Ni alloys as high-temperature braze for SiC-SiC

joined products. KERAMISCHE ZEITSCHRIFT. (2011) Volume: 63, Issue: 5 Pp.322-328. http://www.keramische-zeitschrift.info/index.cfm?objekt=Keram&jahr=2011&ausgabe=5&rubrik=Aus%20Forschung%20und%20Technik&lang=DE&artikel_id=215636&navi=2

295. Wang, S.-G., Zhang, Y., Zhang, Y.-M., Zhang, Y.-M., Ohmic contacts of 4H-SiC on ion-implantation

layers. CHINESE PHYSICS B. (2010) Volume: 19, Issue: 1, Pp. 017204. DOI: https://doi.org/10.1088/1674-1056/19/1/017204

296. Grosser, M., Schmid, U., Influence of back pressure and plasma power on grain size, phase

composition and resistivity of tantalum thin films. PROCEEDINGS OF SPIE - Vol. 7362: Smart Sensors, Actuators, and MEMS IV. (2009) 8 p. DOI: https://doi.org/10.1117/12.821332

297. Grosser, M., Schmid, U., The impact of sputter conditions on the microstructure and on the resistivity

of tantalum thin films. THIN SOLID FILMS (2009) Volume 517, Issue 16, Pp 4493-4496. DOI: https://doi.org/10.1016/j.tsf.2008.12.009

298. Yang, H., Peng, T.H., Wang, W.J., Wang, W.Y., Chen, X.L., Interface metallization and electrical

characterization of Ta-Pt multilayers on n-type SiC. APPLIED SURFACE SCIENCE. (2008) Volume 255, Issue 5, Part 2, Pp. 3121-3125. DOI: https://doi.org/10.1016/j.apsusc.2008.08.112

22.- MWNT reinforced melamine-formaldehyde containing alpha-cellulose By: Licea-Jimenez, L.; Henrio, P. -Y.; Lund, A.; et al. COMPOSITES SCIENCE AND TECHNOLOGY Volume: 67 Issue: 5 Pages: 844-854 Published: APR 2007 CITAS A

299. Li, WH., Xu, J., He, XW., Zhang, JJ., Zong, EM., Liu, XH., Fu, SY. Preparation and characteristics of Aziridine-Benzoguanamine-Urea-Melanmine-Formaldehyde resins. 4TH International Conference on Advanced Composite Materials and Manufacturing Engineering 2017. IOP Conference Series-Materials Science and Engineering, (2017) 207, Article Number 012015. DOI: https://doi.org/10.1088/1757-899X/207/1/012015

300. Slobodian, P., Riha, P., Olejnik, R., Benlikaya, R. Analysis of sensing properties of thermoelectric vapor sensor made of carbon nanotubes/ethylene-octene copolymer composites CARBON, (2016) 110, pp. 257-266. DOI: https://doi.org/10.1016/j.carbon.2016.09.02

301. Papanicolau, GC., Portan, DV., Petropoulos, GN., Kontaxis, LC. Effect of TiO2 nanotubes developed on

pure titanium substrates on the mechanical performance of titanium-titanium single-lap adhesive

31

joints CIENCIA & TECNOLOGIA DOS MATERIAIS, (2016) 28, pp. 130-137. DOI: https://doi.org/10.1016/j.ctmat.2016.02.004

302. Wang, JQ., Ou, EC., Li, JJ., Yang, XY., Wang, W., Yan, ZY., Li, C. Synthesis of mesoporous titania-graphite composite templated by hypocrellins for visible-light photocatalytic degradation of acetaldehyde MATERIALS SCIENCE INSEMICONDUCTOR PROCESSING, (2015) 31, pp. 397-404. DOI: https://doi.org/10.1016/j.mssp.2014.12.029

303. Mansoor, M., Shahid, M., Habib, A. Strengthening of Bisphenol-A Epoxy Resin by the Addition of Multi-Wall Carbon Nanotubes Arabian JOURNAL FOR SCIENCE AND ENGINEERING, (2014) 39, pp. 6411-6420. DOI: https://doi.org/10.1007/s13369-014-1290-5

304. Slobodian, P., Zatloukal, M., Saha, P. Multi-Wall Carbon Nanotube Dispersion In Pmma Matrix Studied Through Rheology CHEMICKE LISTY, (2014) 108, pp. S66-S70.

305. Slobodian, P., Riha, P., Olejnik, R., Cvelbar, U., Saha, P. Enhancing effect of KMnO4 oxidation of carbon nanotubes network embedded in elastic polyurethane on overall electro-mechanical properties of composite (2013) COMPOSITES SCIENCE AND TECHNOLOGY, Volume: 81, Pp. 54-60. DOI: https://doi.org/10.1016/j.compscitech.2013.03.02

306. Jiang, S., Hou, H., Greiner, A., Agarwal, S. Tough and transparent nylon-6 electrospun nanofiber reinforced melamineformaldehyde composites (2012) ACS APPLIED MATERIALS AND INTERFACES, Volume: 4 Issue: 5, Pp. 2597-2603. DOI: https://doi.org/10.1021/am300286m

307. Shao, X.-N., Zhang, X.-F. Self-assembly of phthalocyanine-carbon nanotubes dispersed in micelle and light induced long-lived charge separation state (2012) GAODENG XUEXIAO HUAXUE XUEBAO/CHEMICAL JOURNAL OF CHINESE UNIVERSITIES, Volume: 33 Issue: 4, Pp. 806-812. DOI: https://doi.org/10.3969/j.issn.0251-0790.2012.04.028

308. Hu, X., Zeng, H., Zhou, H., Yu, R., Dong, Y., Zeng, Z., Shen, X. Modification of polyacrylonitrile-based carbon fiber with carbon nanotubes treated by chitosan derivatives (2011) ACTA POLYMERICA SINICA, 10), pp. 1166-1172. DOI: https://doi.org/10.3724/SP.J.1105.2011.10235

309. Peng, Z., Feng, C., Luo, Y., Yi, Z., Kong, L. Structure and properties of self-assembled narural rubber/multi-walled carbon nanotube composites JOURNAL WUHAN UNIVERSITY OF TECHNOLOGY, MATERIALS SCIENCE EDITION, (2011) Volume: 26, Issue: 5, Pp. 807-811. DOI: https://doi.org/10.1007/s11595-011-0315-0

310. Slobodian, P., Rihab, P., Lengalovac, A., Olejnika, R., Kimmerd, D., Sahaa, P. Effect of compressive strain on electric resistance of multi-wall carbon nanotube networks (2011) JOURNAL OF EXPERIMENTAL NANOSCIENCE, Volume: 6, Issue: 3, Pp. 294 - 304. DOI: https://doi.org/10.1080/17458080.2010.50652

311. Slobodian, P., Riha, P., Lengalova, A., Svoboda, P., Saha, P. Multi-wall carbon nanotube networks as potential resistive gas sensors for organic vapor detection (2011) CARBON, Volume: 49, Issue: 7, Pp. 2499-2507. DOI: https://doi.org/10.1016/j.carbon.2011.02.020

312. Zheng, Y.-P., Zhang, J.-X., Yu, P.-Y., Shi, W., Wang, B. Investigation of the microstructure of epoxy resin/MWNTs nanocomposite by the positron annihilation technique POLYMER - PLASTICS TECHNOLOGY AND ENGINEERING, (2010) Volume: 49, Issue: 10, Pp. 1016-1021. DOI: https://doi.org/10.1080/03602559.2010.482082

313. Zheng, Y.-P., Zhang, J.-X., Yu, P.-Y., Liu, L.-L., Gao, Y. Influence of hyperbranched polyamine-ester modified carbon nanotubes on properties of epoxy nanocomposites (2009) JOURNAL OF COMPOSITE MATERIALS, Volume: 43, Issue: 23, pp. 2771-2783. DOI: https://doi.org/10.1177/0021998309345301

314. Wu, B., Bai, L., Gong, Q.-M., Liang, J. Effect of non-ionic surfactants on the dispersion of multiwalled carbon nanotubes at high loading in etanol WULI HUAXUE XUEBAO/ ACTA PHYSICO - CHIMICA SINICA, (2009) Volume: 25, Issue: 6, Pp. 1065-1069. DOI: https://doi.org/10.3866/PKU.WHXB20090601

32

315. Zheng, Y., Zhang, J., Xiaodong, Y., Chen, W., Wang, R. Effects of functionalized MWNTs with GMA on

the properties of PMMA nanocomposites JOURNAL OF APPLIED POLYMER SCIENCE, (2009) Volume: 112, Issue: 3, Pp. 1755-1761. DOI: https://doi.org/10.1002/app.29303

316. Kimmel, D., Slobodiam, P., Petrás, D., Zatloukal, M., Olejnik, R., Sáha, P. Polyurethane/multiwalled carbon nanotube nanowebs prepared by an electrospieeing process JOURNAL OF APPLIED POLYMER SCIENCE, (2009) Volume: 111, Issue: 6, Pp. 2711-2714. DOI: https://doi.org/10.1002/app.29238

317. Kharisov, B.I., Kharissova, O.V., Gutierrez, H.L., Méndez, U.O. Recent advances on the soluble carbon nanotubes INDUSTRIAL AND ENGINEERING CHEMISTRY RESEARCH, (2009) Volume: 48, Issue: 2, Pp. 572-590. DOI: https://doi.org/10.1021/ie800694f

318. Loos, M.R., Coelho, L.A.F., Pezzin, S.H., Amico, S.C. Effect of carbon nanotubes addition on the mechanical and termal properties of epoxy matrices MATERIALS RESEARCH, (2008) Volume: 11, Issue: 3, Pp. 347-352. DOI: https://doi.org/10.1590/S1516-14392008000300019

319. Rafailov, P.M., Thomsen, C., Dettlaff-Weglikowska, U., Roth, S. High levels of electrochemical doping

of carbon nanotubes: Evidence for a transition from double-layer charging to intercalation and functionalization JOURNAL OF PHYSICAL CHEMISTRY B, (2008) Volume:112, Issue: 17, Pp.5368-5373. DOI: https://doi.org 10.1021/jp709830y

23.- Interface Reactions and Electrical Properties of Ta/4H-SiC Contacts By: Cao Y., Pérez-García S. A., Nyborg L., MATERIALS SCIENCE FORUM- SILICON CARBIDE AND RELATED MATERIALS 2006. Volume: 556-557 Pages: 713-716 Publised: 2007 Citas B

[37] Cao Y., Nyborg L., Contact Formation on Silicon Carbide by Use of Nickel and Tantalum in a Materials Science Point of View. Book: Properties and Applications of Silicon Carbide Edited by Rosario Gerhardt, ISBN 978-953-307-201-2, 546 pages, Publisher: InTech, Chapter 8, Pp.171-194. DOI: https://doi.org/10.5772/14601

24.- Pérez-García S. A., Nyborg L., Application of angle-resolved XPS for characterisation of SiC/Ni2Si thin film systems. Surface and Interface Analysis. Volume: 38, Issue: 4 Pages: 859-862 Published: 2006 CITAS A

320. Yang K., Chen X., Wang L., Zhang L., Jin S., Liang C., SBA-15-Supported Metal Silicides Prepared by Chemical Vapor Deposition as Efficient Catalysts Towards the Semihydrogenation of Phenylacetylene CHEMCATCHEM, (2017) Volume: 9, Issue: 7 Pp. 1337-1342. DOI: https://doi.org/10.1002/cctc.201601653

321. Yang K., Chen X., Guan J., Liang C., Nickel silicides prepared from organometallic polymer as efficient catalyst towards hydrogenation of phenylacetylene. CATALYSIS TODAY. (2015) Volume 246, Pp. 176-183. DOI: https://doi.org/10.1016/j.cattod.2014.09.027

322. Cichoň S., Macháč P., Barda B., Kudrnová M., Si ohmic contacts on N-type SiC studied by XPS.

MICROELECTRONIC ENGINEERING. (2013) Volume 106, Pp. 132-138. DOI: https://doi.org/10.1016/j.mee.2012.12.019

33

323. Wang Z.-J., Fu Q., Wang Z., Bao X., Growth and characterization of Au, Ni and Au–Ni nanoclusters on 6H-SiC(0001) carbon nanomesh. SURFACE SCIENCE. (2012) Volume 606, Issues 15–16, Pp. 1313-1322. DOI: https://doi.org/10.1016/j.susc.2012.04.017

324. Mao Y., Mombello D., Baroni C., Wettability of Ni–Cr filler on SiC ceramic and interfacial reactions for

the SiC/Ni–51Cr system. SCRIPTA MATERIALIA. (2011) Volume 64, Issue 12, Pp. 1087-1090. DOI: https://doi.org/10.1016/j.scriptamat.2011.02.027

325. Wang J., Cumpson P.J., Modelling of angle-resolved x-ray photoelectron spectroscopy (ARXPS)

intensity ratios for nanocharacterisation of closely packed shell-core nanofibres. PROC. SPIE 6648, INSTRUMENTATION, METROLOGY, AND STANDARDS FOR NANOMANUFACTURING, 66480F (2007) DOI: https://doi.org/10.1117/12.732364

Citas B

[38] Tam P.L., Jelvestam U., Cao Y., Nyborg L., Corrosion properties of thermally annealed and co-sputtered nickel silicide thin films. SURFACE AND COATINGS TECHNOLOGY, (2011) Volume 206, Issue 6, Pp. 1160-1167. DOI: https://doi.org/10.5772/14601

25.-Covalent amino-functionalisation of single-wall carbon nanotubes By: Gromov A, Dittmer S, Svensson J, Nerushev OA, Perez-Garcia SA, Licea-Jimenez L, Rychwalski R, Campbell EEB. JOURNAL OF MATERIALS CHEMISTRY Volume: 15 Issue: 32 Pages: 3334-3339 Published: 2005 CITAS A

326. Chen, Da-Zhu; Qin, Si-Yin; Tsui, Gary C. P.; et al. Fabrication, morphology and thermal properties of octadecylamine-grafted graphene oxide-modified phase-change microcapsules for thermal energy storage Composites Part B-Engineering (2019) Volume: 157 Pages: 239-247 DOI: https://doi.org/10.1016/j.compositesb.2018.08.066

327. J. Wang, D.Yang, J. Shi, Q.Li, Q. Liu High desalination performance of reverse osmosis membrane

incorporating single-walled carbon nanotubes with tip and inner modification Desalination and Water Treatment Volume: 111 Pages: 22-31 DOI: https://doi.org/10.5004/dwt.2018.22236

328. M. Zhaoling, F. Hao, G. Cibing ,H. Youguo, H. Sijiang, L. Qingyu, and W. Hongqiang Three-dimensional

flower-like NiCo2O4/CNT for efficient catalysis of the oxygen evolution reaction RSC Advances (2018) Volume: 8 Issue: 49 Pages: 28209-28215 DOI: https://doi.org/10.1039/c8ra05639k

329. K. Zelechowska, D. Sobota, B. Cieslik, M. Prześniak-Welenc, M. Łapiński & J. F. Biernat Bis-

phosphonated carbon nanotubes: One pot synthesis and their application as efficient adsorbent of mercury Fullerenes Nanotubes and Carbon Nanostructures (2018) Volume: 26 Issue: 5 Pages: 269-277 DOI: https://doi.org/10.1080/1536383X.2018.1434511

330. Zhao, S., Guo, T., Li, X., Xu, TG., Yang, B., Zhao, Z. Carbon nanotubes covalent combined with

graphitic carbon nitride for photocatalytic hydrogen peroxide production under visible light (2018) Applied Catalysis B-Environmental, 224, pp. 725-732. DOI: https://doi.org/10.1016/j.apcatb.2017.11.005

331. Wang, JH., Yang., DF., Gao, XL., Wang, XJ., Li, Q., Liu, QZ. Tip and inner walls modification of single-walled carbon nanotubes (3.5nm diameter) and preparation of polyamide/modified CNT nanocomposite reverse osmosis membrane (2018) Journal of Experimental Nanoscience, 13, pp. 11-26. DOI: https://doi.org/10.1080/17458080.2017.1405163

332. Seyedi, N., Saidi, K., Sheibani, H. Green Synthesis of Pd Nanoparticles Supported on Magnetic Graphene Oxide by Origanum vulgare Leaf Plant Extract: Catalytic Activity in the Reduction of

34

Organic Dyes and Suzuki-Miyaura Cross-Coupling Reaction (2018) Catalysis Letters, 148, pp. 277-288. DOI: https://doi.org/10.1007/s10562-017-2220-4

333. Fernandez, VKA., Melguizo, M., Gallarin, CG., de la Torre, MDL., Valero, MDG., Alonso, AM., García, MD., Garzon, FJL., Mendoza, MP. Copper-catalyzed direct amination of the superficial graphenic domains of multi-walled carbon nanotubes (2017) Catalysis Science & Technology, 7, pp. 3361-3374. DOI: https://doi.org/10.1039/c7cy00601b

334. Xu, WH., Ding, YC., Yu, Y., Jiang, SH., Chen, LL., Hou, HQ. Highly foldable PANi@CNTs/PU dielectric composites toward thin-film capacitor application (2017) Materials Letter, 192, pp. 25-28. DOI: https://doi.org/10.1016/j.matlet.2017.01.064

335. Jing, HY., Ren, SZ., Shi, YT., Song, XD., Yang, Y., Guo, YN., An, YL., Hao, C. Ozonization, Amination and Photoreduction of Graphene Oxide for Triiodide Reduction Reaction: An Experimental and Theoretical Study (2017) Electrochimica Acta, 226, pp. 10-17. DOI: https://doi.org/10.1016/j.electacta.2016.12.190

336. Cao, M., Luo, ZL., Yang, Y., Wang, YB., Wang, BB. In Situ Polymerized Poly(Amide Imide)/Multiwalled Carbon Nanotube Composite: Structural, Mechanical, and Electrical Studies (2017) Polymer-Plastics Technology and Engineering , 56, pp. 1391-1400. DOI: https://doi.org/10.1080/03602559.2016.1275689

337. Permyakova, ES., Novopashinna, DS., Venyaminova, AG., Apartsin, EK. Non-covalent anchoring of oligonucleotides on single-walled carbon nanotubes via short bioreducible linker (2017) RSC Advance, 7, pp. 29212-29217. DOI: https://doi.org/10.1039/c7ra04933a

338. Mostazo-Lopez, MJ., Ruiz-Rosas, R., Morallon, E., Cazorla-Amoros, D. Nitrogen doped superporous carbon prepared by a mild method. Enhancement of supercapacitor performance (2016) International Journal of Hydrogen Energy, 41, pp.19691-19701. DOI: https://doi.org/10.1016/j.ijhydene.2016.03.091

339. Qi, HX., Zhao, B. Effects of amino group on the properties of carbon nanotubes (2016) Fullerenes Nanotubes and Carbon Nanostructures, 24, pp. 249-252. DOI: https://doi.org/10.1080/1536383X.2016.1146707

340. Spinato, C., Giust, D., Vacchi, IA., Nemard-Moyon, C., Kostarelos, K., Bianco, A. Different chemical strategies to aminate oxidised multi-walled carbon nanotubes for siRNA complexation and delivery (2016) Journal of Materials Chemistry B, 4, pp. 431-441. DOI: https://doi.org/10.1039/c5tb02088c

341. Ma, LC., Meng, LH., Wu, GS., Wang, YW., Zhao, M., Zhan, CH., Huang, YD. Effects of bonding types of carbon fibers with branched polyethyleneimine on the interfacial microstructure and mechanical properties of carbon fiber/epoxy resin composites (117) Composites Science and Technology, 117, 289-297. DOI: https://doi.org/10.1016/j.compscitech.2015.06.018

342. Mostazo-Lopez, MJ., Ruiz-Rosas, R., Morallon, E., Cazorla-Amoros, D. Generation of nitrogen functionalities on activated carbons by amidation reactions and Hofmann rearrangement: Chemical and electrochemical characterization (2015) Carbon, 91, pp. 252-265. DOI: https://doi.org/10.1016/j.carbon.2015.04.089

343. Ji, YC., Hu, J., Huang, LJ., Che, W., Streb, C., Song, YF. Covalent Attachment of Anderson-Type Polyoxometalates to Single-Walled Carbon Nanotubes Gives Enhanced Performance Electrodes for Lithium Ion Batteries (2015) Chemistry-A European Journal, 21, pp. 6469-6474. DOI: https://doi.org/10.1002/chem.201500218

344. Wang, L., Zhao, JH., Bai, SL., Zhao, H. Zhu, ZP. Significant catalytic effects induced by the electronic interactions between carboxyl and hydroxyl group modified carbon nanotube supports and vanadium species for NO reduction with NH3 at low temperature (2014) Chemical Engineering Journal, 254, pp. 399-409. DOI: https://doi.org/10.1016/j.cej.2014.05.096

345. Lim, J., Shin, DG., Yeo, H., Goh, M., Ku, BC., Yang, CM., Lee, DS., Hwang, JY., Park, B., You, NH. The Mechanical and Electrical Properties of Carbon Nanotube-Grafted Polyimide Nanocomposites (2014)

35

Journal of Polymer Science Part B-Polymer Physics, 52, pp. 960-966. DOI: https://doi.org/10.1002/polb.23515

346. Mungse, HP., Khatri, PO. Chemically Functionalized Reduced Graphene Oxide as a Novel Material for Reduction of Friction and Wear (2014) Journal of Physical Chemistry C, 118, pp. 14394-14402. DOI: https://doi.org/10.1021/jp5033614

347. Moscoso, R., Carbajo, J., Squella, JA. MULTIWALLED CARBON NANOTUBES MODIFIED ELECTRODES WITH ENCAPSULATED 1,4-DIHYDROPYRIDINE-4-NITROBENZENE SUBSTITUTED COMPOUNDS (2014) Journal of the Chilean Chemical Society, 59, pp. 2498-2501. DOI: https://doi.org/10.4067/S0717-97072014000200022

348. Laird, ED., Hoodk, MA., Li, CY. Cooperative Interaction, Crystallization, and Properties of Polymer-Carbon Nanotube Nanocomposites (2014) Carbon Nanomaterials, 2nd Edition, Advanced Materials and Technologies Series, Edited by Gogotsi, Y, Presser, V. Pp. 135, 186.

349. Lushington, A., Liu, J., Tang, YJ., Li, RY., Sun, XL. Surface modification of nitrogen-doped carbon nanotubes by ozone via atomic layer deposition (2014) Jorunal of Vacuum Science & Technology, 32, Article Number 01A124. DOI: https://doi.org/10.1116/1.4847995

350. Ren, FJ., Yu, HJ., Wang, L., Saleem, M., Tian, Z., Ren, PF. Current progress on the modification of carbon nanotubes and their application in electromagnetic wave absorption (2014) RSC Advance, 4, pp. 14419-14431. DOI: https://doi.org/10.1039/c3ra46989a

351. Chen, Z., Dai, X.J., Magniez, K., Lamb, P.R., Fox, B.L., Wang, X. Improving the mechanical properties of multiwalled carbon nanotube/epoxy nanocomposites using polymerization in a stirring plasma system (2014) Composites Part A: Applied Science and Manufacturing, 56, pp. 172-180. DOI: https://doi.org/10.1016/j.compositesa.2013.10.009

352. Shaabani, A., Mahyari, M. PdAu alloy nanoparticles encapsulated by PPI-g MWCNTs as a novel catalyst for chemoselective hydrogenation of alkenes under mild conditions (2013) Catalysis Letters, 143 (12), pp. 1277-1284. DOI: https://doi.org/10.1007/s10562-013-1063-x

353. Zelechowska, K., Stolarczyk, K., Łyp, D., Rogalski, J., Roberts, K.P., Bilewicz, R., Biernat, J.F. Aryl and N-arylamide carbon nanotubes for electrical coupling of laccase to electrodes in biofuel cells and biobatteries (2013) Biocybernetics and Biomedical Engineering, 33 (4), pp. 235-245. DOI: https://doi.org/10.1016/j.bbe.2013.09.006

354. Inam, F., Vo, T., Jones, J.P., Lee, X. Effect of carbon nanotube lengths on the mechanical properties of epoxy resin: An experimental study (2013) Journal of Composite Materials, 47 (19), pp. 2321-2330. DOI: https://doi.org/10.1177/0021998312457198

355. Du, X., Zhou, C., Liu, H.-Y., Mai, Y.-W., Wang, G. Facile chemical synthesis of nitrogen-doped graphene sheets and their electrochemical capacitance (2013) Journal of Power Sources, 241, pp. 460-466. DOI: https://doi.org/10.1016/j.jpowsour.2013.04.138

356. Park, O.-K., Hwang, J.-Y., Goh, M., Lee, J.H., Ku, B.-C., You, N.-H. Mechanically strong and multifunctional polyimide nanocomposites using amimophenyl functionalized graphene nanosheets (2013) Macromolecules, 46 (9), pp. 3505-3511. DOI: https://doi.org/10.1021/ma400185j

357. Guan, W., Li, Z., Zhang, H., Hong, H., Rebeyev, N., Ye, Y., Ma, Y. Amine modified graphene as reversed-dispersive solid phase extraction materials combined with liquid chromatography-tandem mass spectrometry for pesticide multi-residue analysis in oil crops (2013) Journal of Chromatography A, 1286, pp. 1-8. DOI: https://doi.org/10.1016/j.chroma.2013.02.043

358. Zharikova, E.F., Ochertyanova, L.I., Vasylenko, I.V., Dobrokhotova, Zh.V., Bogomyakov, A.S., Imshennik, V.K., Maksimov, Y.V., Kiskin, M.A., Ivanov, V.K., Kirdyankin, D.I., Shub, B.R., Grishin, M.V., Ganin, A.K., Novotortsev, V.M., Eremenko, I.L. New magnetic material based on modified multi-walled carbon nanotubes and iron(III) derivatives (2013) Russian Chemical Bulletin, 62 (3), pp. 646-656. DOI: https://doi.org/10.1007/s11172-013-0087-0

36

359. Kar, T., Scheiner, S., Roy, A.K. Reliability of approximate methods to study tip-functionalized single-

wall carbon nanotubes (2012) Journal of Physical Chemistry C, 116 (48), pp. 25401-25406. DOI: https://doi.org/10.1021/jp3089947

360. Choudhary, S., Mungse, H.P., Khatri, O.P. Dispersion of alkylated graphene in organic solvents and its potential for lubrication applications (2012) Journal of Materials Chemistry, 22 (39), pp. 21032-21039. DOI: https://doi.org/10.1039/c2jm34741e

361. Mohammadzadeh, F., Jahanshahi, M., Rashidi, A.M. Preparation of nanosensors based on organic functionalized MWCNT for H 2S detection (2012) Applied Surface Science, 259, pp. 159-165. DOI: https://doi.org/10.1016/j.apsusc.2012.07.011

362. Nie, Y., Hübert, T. Surface modification of carbon nanofibers by glycidoxysilane for altering the conductive and mechanical properties of epoxy composites (2012) Composites Part A: Applied Science and Manufacturing, 43 (8), pp. 1357-1364. DOI: https://doi.org/10.1016/j.compositesa.2012.03.025

363. Chen, Z., Dai, X.J., Lamb, P.R., De Celis Leal, D.R., Fox, B.L., Chen, Y., Du Plessis, J., Field, M., Wang, X. Practical amine functionalization of multi-walled carbon nanotubes for effective interfacial bonding (2012) Plasma Processes and Polymers, 9 (7), pp. 733-741. DOI: https://doi.org/10.1002/ppap.201100203

364. Zharikova, E.F., Ochertyanova, L.I., Vasylenko, I.V., Gontar, I.V., Efimov, N.N., Minin, V.V., Dobrokhotova, Z.V., Kiskin, M.A., Novotortsev, V.M., Eremenko, I.L. Multi-walled carbon nanotubes with the pyridine-containing fragment and copper(II) ions (2012) Russian Chemical Bulletin, 61 (7), pp. 1430-1436. DOI: https://doi.org/10.1007/s11172-012-0185-4

365. Inam, F., Reece, M.J., Peijs, T. Shortened carbon nanotubes and their influence on the electrical properties of polymer nanocomposites (2012) Journal of Composite Materials, 46 (11), pp. 1313-1322. DOI: https://doi.org/10.1177/0021998311418139

366. Apartsin, E.K., Novopashina, D.S., Nastaushev, Y.V., Ven'yaminova, A.G. Fluorescently labeled single-walled carbon nanotubes and their hybrids with oligonucleotides (2012) Nanotechnologies in Russia, 7 (3-4), pp. 99-109. DOI: https://doi.org/10.1134/S199507801

367. Forohar, F., Whitaker, C.M., Uber, I.C., Bellitto, V. Synthesis and Characterization of Nitro-Functionalized Single-Walled Carbon Nanotubes (2012) Journal of Energetic Materials, 30 (1), pp. 55-71. DOI: https://doi.org/10.1080/07370652.2010.542797

368. Zhang, J., Xiao, C.-F., Wang, J., Huang, Q.-L. Study on preparation and properties of SF/PAN blend membranes (2011) Journal of Tianjin Polytechnic University, 30 (6), pp. 5-8+14. http://en.cnki.com.cn/Article_en/CJFDTotal-TJFZ201106002.htm

369. Mao, D., Yaniv, Z. Carbon nanotube reinforced vinyl ester nanocomposites with improved mechanical properties (2011) International SAMPE Technical Conference, 10 p.

370. Rao, C.N.R., Govindaraj, A. Nanotubes and nanowires 2nd edition (2011) RSC Nanoscience and Nanotechnology, pp. 1-555. DOI: https://doi.org/10.1039/9781847552525

371. Nie, Y., Hübert, T. Effect of carbon nanofiber (CNF) silanization on the properties of CNF/epoxy nanocomposites (2011) Polymer International, 60 (11), pp. 1574-1580. DOI: https://doi.org/10.1002/pi.3124

372. Lai, L., Chen, L., Zhan, D., Sun, L., Liu, J., Lim, S.H., Poh, C.K., Shen, Z., Lin, J. One-step synthesis of NH2-graphene from in situ graphene-oxide reduction and its improved electrochemical properties (2011) Carbon, 49 (10), pp. 3250-3257. DOI: https://doi.org/10.1016/j.carbon.2011.03.051

373. Wepasnick, K.A., Smith, B.A., Schrote, K.E., Wilson, H.K., Diegelmann, S.R., Fairbrother, D.H. Surface and structural characterization of multi-walled carbon nanotubes following different oxidative treatments (2011) Carbon, 49 (1), pp. 24-36. DOI: https://doi.org/10.1016/j.carbon.2010.08.034

37

374. Kar, T., Scheiner, S., Patnaik, S.S., Bettinger, H.F., Roy, A.K. IR characterization of tip-functionalized single-wall carbon nanotubes (2010) Journal of Physical Chemistry C, 114 (49), pp. 20955-20961. DOI: https://doi.org/10.1021/jp104883e

375. Sciacca, B., Alvarez, S.D., Geobaldo, F., Sailor, M.J. Bioconjugate functionalization of thermally

carbonized porous silicon using a radical coupling reaction (2010) Dalton Transactions, 39 (45), pp. 10847-10853. DOI: https://doi.org/10.1039/c0dt00936a

376. Zhang, H., Jin, Y., Xu, L. Structure and properties of Amid-CNT/PAN composite fibers by wet spinning method (2010) Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 27 (6), pp. 9-15.

377. Karousis, N., Tagmatarchis, N., Tasis, D. Current progress on the chemical modification of carbon nanotubes (2010) Chemical Reviews, 110 (9), pp. 5366-5397. DOI: https://doi.org/10.1021/cr100018g

378. Wang, L., Feng, S., Zhao, J., Zheng, J., Wang, Z., Li, L., Zhu, Z. A facile method to modify carbon nanotubes with nitro/amino groups (2010) Applied Surface Science, 256 (20), pp. 6060-6064. DOI: https://doi.org/10.1016/j.apsusc.2010.03.120

379. Kalita, G., Adhikari, S., Aryal, H.R., Wakita, K., Umeno, M. Poly(3-octylthiophene)/fullerene heterojunction solar cell Incorporating carbon nanotubes (2010) Journal of Nanoscience and Nanotechnology, 10 (6), pp. 3844-3848. DOI: https://doi.org/10.1166/jnn.2010.1974

380. Zhang, H.-L., Yang, F.-Y., Li, C.-Q., Xu, L.-H. The structure and properties of asymmetrical peak in the azimuthal scan for the PAN/CNT composite fiber (2010) Gongneng Cailiao/Journal of Functional Materials, 41 (4), pp. 671 673+676.

381. Inam, F., Yan, H., Reece, M.J., Peijs, T. Structural and chemical stability of multiwall carbon nanotubes in sintered ceramic nanocomposite (2010) Advances in Applied Ceramics, 109 (4), pp. 240-245. DOI: https://doi.org/10.1179/174367509X12595778633336

382. Hauke, F., Hirsch, A. Covalent Functionalization of Carbon Nanotubes (2010) In Carbon Nanotubes and Related Structures: Synthesis, Characterization, Functionalization and Applications, First edited by D.M. Guldi and N Martin, Wiley-VCH Verlag GmbH & Co., pp. 135-198.

383. Wepasnick, K.A., Smith, B.A., Bitter, J.L., Howard Fairbrother, D. Chemical and structural characterization of carbon nanotube surfaces (2010) Analytical and Bioanalytical Chemistry, 396 (3), pp. 1003-1014. DOI: https://doi.org/10.1007/s00216-009-3332-5

384. Mao, D. Improving mechanical properties of nanocomposites using carbon nanotubes (2009) International SAMPE Symposium and Exhibition (Proceedings), 54, 9 p.

385. Mao, D., Yaniv, Z., Fink, R., Johnson, L. Carbon nanotube-reinforced epoxy nanocomposites for mechanical property improvement (2009) Technical Proceedings of the 2009 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2009, 3, pp. 461-464.

386. Zhang, F.-H., Wang, R.-G., He, X.-D., Liu, W.-B., You, J. Chemical functionalization of multiwalled carbon nanotubes by hexamethylene diamine (2009) Xinxing Tan Cailiao/ New Carbon Materials, 24 (4), pp. 369-374. DOI: https://doi.org/10.1016/j.carbon.2009.12.020

387. Kosaka, T., Ohgami, A., Nakamura, T., Ohana, T., Ishihara, M. The preparation of Ag nanoparticle-modified single-walled carbon nanotubes and their antibacterial activity (2009) Biocontrol Science, 14 (3), pp. 133-138. DOI: https://doi.org/10.4265/bio.14.133

388. Gribble, G.W. Rearrangements: Hofmann Rearrangement (2009). In: Li JJ (Ed) Name Reactions for Homologations, Part II, John Wiley & Sons, Hoboken, pp. 164-199.

389. Kalita, G., Adhikari, S., Aryal, H.R., Afre, R., Soga, T., Sharon, M., Umeno, M. Functionalization of multi-walled carbon nanotubes (MWCNTs) with nitrogen plasma for photovoltaic device application Current Applied (2009) Physics, 9 (2), pp. 346-351. DOI: https://doi.org/10.1016/j.cap.2008.03.007

38

390. Heister, E., Lutz, T. Functionalized Carbon Nanotubes as Multimodal Drug Delivery Systems for Targeted Cancer Therapy (2009) Nanomedicine Design of Particles, Sensors, Motors, Implants, Robots, and Devices. Edited by Schulz, MJ., Shanov, VN., Yun, Y. P. 61

391. Kalita, G., Adhikari, S., Aryal, H.R., Ghimre, D.C., Afre, R., Soga, T., Sharon, M., Umeno, M. Fluorination of multi-walled carbon nanotubes (MWNTs) via surface wave microwave (SW-MW) plasma treatment (2008) Physica E: Low-Dimensional Systems and Nanostructures, 41 (2), pp. 299-303. DOI: https://doi.org/10.1016/j.physe.2008.07.015

392. Fogden, S., Verdejo, R., Cottam, B., Shaffer, M. Purification of single walled carbon nanotubes: The problem with oxidation debris (2008) Chemical Physics Letters, 460 (1-3), pp. 162-167. DOI: https://doi.org/10.1016/j.cplett.2008.05.069

393. Nakamura, T., Ohana, T., Ishihara, M., Hasegawa, M., Koga, Y. Photochemical modification of single-walled carbon nanotubes with amino functionalities and their metal nanoparticles attachment (2008) Diamond and Related Materials, 17 (4-5), pp. 559-562. DOI: https://doi.org/10.1016/j.diamond.2007.08.029

394. Bredeau, S., Peeterbroeck, S., Bonduel, D., Alexandre, M., Dubois, P. From carbon nanotube coatings to high-performance polymer nanocomposites (2008) Polymer International, 57 (4), pp. 547-553. DOI: https://doi.org/10.1002/pi.2375

395. Park, H.M., Kim, K.H., Lee, S.H., Park, D.H., Hong, Y.K., Joo, J. Electrochemical polymerization of polypyrrole (PPy) and poly(3-hexylthiophene) (P3HT) using functionalized single-wall carbon nanotubes Colloids and Surfaces A: Physicochemical and Engineering (2008) Aspects, 313-314, pp. 72-76. DOI: https://doi.org/10.1016/j.colsurfa.2007.04.077

396. Jiang, L., Gao, L. Densified multiwalled carbon nanotubes-titanium nitride composites with enhanced thermal properties (2008) Ceramics International, 34 (1), pp. 231-235. DOI: https://doi.org/10.1016/j.ceramint.2006.09.011

397. Nakamura, T., Ohana, T., Ishihara, M., Ohgami, A., Kosaka, T. Photochemical modification of single-walled carbon nanotubes with thiol and amino functionalities and their metal nanoparticle attachment (2007) New Diamond and Frontier Carbon Technology, 17 (6), pp. 309-320.

398. He, X., Zhang, F., Wang, R., Liu, W. Preparation of a carbon nanotube/carbon fiber multi-scale reinforcement by grafting multi-walled carbon nanotubes onto the fibers (2007) Carbon, 45 (13), pp. 2559-2563. DOI: https://doi.org/10.1016/j.carbon.2007.08.018

399. Vivekchand, S.R.C., Govindaraj, A., Rao, C.N.R. Nanotubes and Nanowires: Recent Developments (2007) Nanomaterials Chemistry: Recent Developments and New Directions, pp. 45-118. DOI: https://doi.org/10.1002/9783527611362.ch2

400. Qi, Z.-M., Wei, M., Honma, I., Zhou, H. Thin films composed of multiwalled carbon nanotubes, gold nanoparticles and myoglobin for humidity detection at room temperatura (2007) ChemPhysChem, 8 (2), pp. 264-269. DOI: https://doi.org/10.1002/cphc.200600409

401. Ruelle, B., Peeterbroeck, S., Gouttebaron, R., Godfroid, T., Monteverde, F., Dauchot, J.-P., Alexandre, M., Hecq, M., Dubois, P. Functionalization of carbon nanotubes by atomic nitrogen formed in a microwave plasma Ar + N2 and subsequent poly(ε-caprolactone) grafting (2007) Journal of Materials Chemistry, 17 (2), pp. 157-159. DOI: https://doi.org/10.1039/b613581c

402. Nakamura, T., Ohana, T., Ishihara, M., Ohgami, A., Kosaka, T., Photochemical modification of single-walled carbon nanotubes with thiol and amino functionalities and their metal nanoparticle attachment (2007) New Diamond and Frontier Carbon Technology, 17 (6), pp. 309-320.

403. Sgobba, V., Rahman, GMA., Ehli, C. Guldi, DM. Covalent and Non-Covalent Approaches Toward Multifunctional Carbon Nanotube Materials (2007) Fullerenes: Principles and Applications, Edited by: Langa, F., Nierengarten, JF. RSC Nanoscence and Nanotechnology, pp. 329-379. DOI: https://doi.org/10.1039/9781847557711-00329

39

404. Birkett, P.R. Fullerenes (2006) Annual Reports on the Progress of Chemistry - Section A, 102, pp. 420-

448. DOI: http://dx.doi.org/10.1039/B508276P

26.- Photovoltaic solar panel for a hybrid PV/thermal system Author(s): Zakharchenko R, Licea-Jimenez L, Perez-Garcia SA, Vorobiev P, Dehesa-Carrasco U, Perez-Robles JF, Gonzalez-Hernandez J, Vorobiev Y Source: SOLAR ENERGY MATERIALS AND SOLAR CELLS Volume: 82 Issue: 1-2 Pages: 253-261 Published: MAY 1 2004 CITAS A

405. Bashir, Muhammad A.; Ali, Hafiz M.; Amber, Khuram P.; et al. Performance Investigation of Photovoltaic Modules By Back Surface Water Cooling THERMAL SCIENCE Volume: 22 Issue: 6 Pages: 2401-2411 Part: A DOI: https://doi.org/10.2298/TSCI160215290B

406. Hooshmand, P., Shafii, MB., Roshandel, R. An experimental study of a solar hybrid system to

produce freshwater from waste heat of photovoltaic module by using thermosyphon heat pipes (2018) Energy Conversion and Managment, 158, pp. 9-22. DOI: 10.1016/j.enconman.2017.12.043

407. Tomar, V., Tiwari, GN., Norton, B. Solar dryers for tropical food preservation: Thermophysics of crops, systems and components (2017) Solar Energy, 154, pp. 2-13. DOI: 10.1016/j.solener.2017.05.066

408. Brahim, T., Jemni, A., Economical assessment and applications of photovoltaic/thermal hybrid solar technology: A review (2017) Solar Energy, 153, pp. 540-561. DOI: 10.1016/j.solener.2017.05.081

409. Ethreki, AM., Alghoul, MA., Sopian, K. Hussein, T. Towards adopting passive heat dissipation approaches for temperature regulation of PV module as a sustainable solution (2017) Renewable & Sustainable Energy Reviews, 69, pp. 961-1017. DOI: 10.1016/j.rser.2016.09.054

410. Yang, TT., Athienitis, AK. A review of research and developments of building-integrated photovoltaic/thermal (BIPV/T) systems (2016) Renewable & Sustainable Energy Reviews, 66, pp. 886-912. DOI: 10.1016/j.rser.2016.07.011

411. Rajoria, CS., Agrawal, S., Chandra, S., Tiwari, GN., Chauhan, DS. A Novel investigation of building integrated photovoltaic thermal (BiPVT) system: A comparative study (2016) Solar Energy, 131, pp. 107-118. DOI: 10.1016/j.solener.2016.02.037

412. Kossyvakis, DN., Voutsinas, GD., Hristoforou, EV. Experimental analysis and performance evaluation of a tandem photovoltaic-thermoelectric hybrid system (2016) Energy Conversion and Managmente, 117, pp. 490-500. DOI: 10.1016/j.enconman.2016.03.023

413. Elbreki, AM. Alghoul, MA., Al-Shamani, AN., Ammar, AA., Yegani, B., Abogharara, AM., Rusaln, MH., Sopian, K. The role of climatic-design-operational parameters on combined PV/T collector performance: A critical review (2016) Renewable & Sustainable Energy Reviews, 57, pp. 602-647. DOI: 10.1016/j.rser.2015.11.077

414. Michael, JJ., Selvarasan, I., Goic, R. Fabrication, experimental study and testing of a novel photovoltaic module for photovoltaic thermal applications (2016) Renewable Energy, 90, pp. 95-104. DOI: 10.1016/j.renene.2015.12.064

415. Othman, MY., Hamid, SA., Tabook, MAS., Sopian, K., Rosalan, MH., Ibarahim, Z. Performance analysis of PV/T Combi with water and air heating system: An experimental study (2016) Renewable Energy, 86, pp. 716-722. DOI: 10.1016/j.renene.2015.08.061

416. Dubey, S., Soon, CS., Chin, SL., Lee, L. Performance analysis of innovative top cooling thermal photovoltaic (tpv) modules under tropics (2016) Proceedings of the asme 10th international conference on energy sustainability, 1, Article Number UNSP V001T08A001.

417. Herrando, M., Marikides, CN. Hybrid PV and solar-thermal systems for domestic heat and power provision in the UK: Techno-economic considerations (2016) Applied Energy, 161, 512-532. DOI: 10.1016/j.apenergy.2015.09.025

418. Michael, JJ., Iniyan, S., Roic, R. Flat plate solar photovoltaic-thermal (PV/T) systems: A reference guide (2015) Renewaqble & Sustainable Energy Reviews, 51, 62-88. DOI: 10.1016/j.rser.2015.06.022

40

419. Allan, J., Dehouche, Z., Stankovic, S., Mauricette, L. Performance testing of thermal and photovoltaic thermal solar collectors (2015) Energy Science & Engineering, 3, pp. 310-326. DOI: 10.1002/ese3.75

420. Kamthania, D., Tiwari, GN. Photovoltaic thermal air collectors: A review (2014) Journal of Renewable and Sustainable Energy, 6, Article Number 062701. DOI: 10.1063/1.4897944

421. Hamid, SA., Othman, MY., Sopian, K., Zaidi, SH. An overview of photovoltaic thermal combination (PV/T combi) technology (2014) Renewable & Sustainable Energy Reviews, 38, pp.221-222. DOI: 10.1016/j.rser.2014.05.083

422. Al-Shamani, AN., Yazdi, MH., Alghoul, MA., Abed, AM., Ruslan, MH., Mat, S., Sopian, K. Nanofluids for improved efficiency in cooling solar collectors - A review (2014) Renewable &Sustainable Energy Reviews, 38, pp. 348-367. DOI: 10.1016/j.rser.2014.05.041

423. Trinh, AK., Gonzalez, I., Fournier, L., Pelletier, R., Sandoval, JC., Lesage, FJ. Solar thermal energy conversion to electrical power (2014) Applied Thermal Engineering, 70, pp. 675-686. DOI: 10.1016/j.applthermaleng.2014.05.088

424. Herrando, M. Markides, CN., Hellgardt, K. A UK-based assessment of hybrid PV and solar-thermal systems for domestic heating and power: System performance (2014) Applied Enrgy, 122, pp. 288-309. DOI: 10.1016/j.apenergy.2014.01.061

425. Bhattarai, S., Kafle, G.K., Euh, S.-H., Oh, J.-H., Kim, D.H. Comparative study of photovoltaic and thermal solar systems with different storage capacities: Performance evaluation and economic analysis (2013) Energy, 61, pp. 272-282. DOI: 10.1016/j.energy.2013.09.007

426. Du, D., Darkwa, J., Kokogiannakis, G. Thermal management systems for Photovoltaics (PV) installations: A critical review (2013) Solar Energy, 97, pp. 238-254. DOI: 10.1016/j.solener.2013.08.018

427. Quan, Z.H., Wang, L.C., Zhao, Y.H., Deng, Y.C., Wang, G., Liu, H.M. The experimental research on instantaneous efficiency of PV/T module based on micro heat pipe array (2013) Advanced Materials Research, 732-733, pp. 306-311. DOI: 10.4028/www.scientific.net/AMR.732-733.306

428. Yin, B., Wang, Y., Zhu, L., Cui, Y., Huang, Q. Poly-generation of cooling, heating and power performance analysis of PV radiant panel PV/T system (2013) Chongqing Daxue Xuebao/Journal of Chongqing University, 36 (10), pp. 114-119.

429. Rebollo, E., Blanquez, FR., Lopez, I., Platero, CA., Carrero, C. Overall Feasibility of Low Cost Conversion from PV to PVTw (2013) International conference on renewable energy research and applications (ICRERA) pp. 638-643.

430. Kumar, S., Singh, G., Tiwari, G.N., Yadav, J.K. Thermal modelling of a hybrid photovoltaic thermal water heater in parallel configuration (2013) International Journal of Sustainable Energy, 32 (5), pp. 277-295. DOI: 10.1080/14786451.2011.644627

431. Lo Brano, V., Ciulla, G., Beccali, M. Application of adaptive models for the determination of the thermal behaviour of a photovoltaic panel (2013) Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7972 LNCS (PART 2), pp. 344-358.

432. Li, G., Liu, Z., Li, J., Liao, H., Zhu, X., Zhang, W. Experimental study on a novel hybrid photovoltaic/thermal solar system (2013) Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 33 (17), pp. 86-89.

433. Mishra, R.K., Tiwari, G.N. Energy and exergy analysis of hybrid photovoltaic thermal water collector for constant collection temperature mode (2013) Solar Energy, 90, pp. 58-67. DOI: 10.1016/j.solener.2012.12.022

434. Dubey, S., Tay, A.A.O. Testing of two different types of photovoltaic-thermal (PVT) modules with heat flow pattern under tropical climatic conditions (2013) Energy for Sustainable Development, 17 (1), pp. 1-12. DOI: 10.1016/j.esd.2012.09.001

435. Palaskar, V.N., Deshmukh, S.P. Design configurations of hybrid photovoltaic/thermal solar system technology (2012) Proceedings of the Indian National Science Academy, 78 (4), pp. 725-734.

436. Chow, T.T., Tiwari, G.N., Menezo, C. Hybrid solar: A review on photovoltaic and thermal power integration (2012) International Journal of Photoenergy, 2012, art. no. 307287. DOI: 10.1155/2012/307287

437. Zhang, L., Jing, D., Zhao, L., Wei, J., Guo, L. Concentrating PV/T hybrid system for simultaneous electricity and usable heat generation: A review (2012) International Journal of Photoenergy, 2012, Article Number, 869753. DOI: 10.1155/2012/869753

438. Guan, X., Wang, Y.-D., Xiang, Y.-T., Guo, Z.-B. Cascade utilization of energy in solar photovoltaic hot water system (2012) Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 33 (7), pp. 1240-1242.

439. Li, N., Quan, Z., Zhao, Y., Guo, N. The experimental study of new-type water-cooling PV/T collector (2012) Advanced Materials Research, 374-377, pp. 242-247. DOI: 10.4028/www.scientific.net/AMR.374-377.242

41

440. Dutreuil, J.A., Hadim, H.A. Design parameters for high-efficiency hybrid PV/thermal solar energy systems (2011) ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011.

441. He, W., Zhang, Y., Ji, J. Comparative experiment study on photovoltaic and thermal solar system under natural circulation of water (2011) Applied Thermal Engineering, 31 (16), pp. 3369-3376. DOI: 10.1016/j.applthermaleng.2011.06.021

442. Daghigh, R., Ruslan, M.H., Sopian, K. Advances in liquid based photovoltaic/thermal (PV/T) collectors (2011) Renewable and Sustainable Energy Reviews, 15 (8), pp. 4156-4170. DOI: 10.1016/j.rser.2011.07.028

443. Riffat, S.B., Cuce, E. A review on hybrid photovoltaic/thermal collectors and systems (2011) International Journal of Low-Carbon Technologies, 6 (3), art. no. ctr016, pp. 212-241. DOI: 10.1016/j.apenergy.2009.06.037

444. Tiwari, G.N., Mishra, R.K., Solanki, S.C. Photovoltaic modules and their applications: A review on thermal modelling (2011) Applied Energy, 88 (7), pp. 2287-2304. DOI: 10.1016/j.apenergy.2011.01.005

445. Tiwari, GN., Dubey, S. Thermal Modelling of Hybrid Photovoltaic/Thermal (PV/T) Systems (2010) Fundamentals of Photovoltaic Modules and Their Applications, RSC Energy Series, pp. 174-256.

446. Kumar, S. Tiwari, GN. Life cycle cost analysis of single slope hybrid (PV/T) active solar still (2009) 447. Joshi, A.S., Dincer, I., Reddy, B.V. Analysis of energy and exergy efficiencies for hybrid PV/T

systems (2011) International Journal of Low-Carbon Technologies, 6 (1), pp. 64-69. DOI: 10.1093/ijlct/ctq045

448. Ibrahim, A., Othman, M.Y., Ruslan, M.H., Mat, S., Sopian, K. Recent advances in flat plate photovoltaic/thermal (PV/T) solar collectors (2011) Renewable and Sustainable Energy Reviews, 15 (1), pp. 352-365. DOI: 10.1016/j.rser.2010.09.024

449. Sok, E., Zhuo, Y., Wang, S. Performance and economic evaluation of a hybrid Photovoltaic/Thermal solar system in Northern China (2010) World Academy of Science, Engineering and Technology, 72, pp. 176-181. DOI: 10.1016/j.rser.2009.01.009

450. Kumar, S., Tiwari, A. Design, fabrication and performance of a hybrid photovoltaic/thermal (PV/T) active solar still (2010) Energy Conversion and Management, 51 (6), pp. 1219-1229. DOI: 10.1016/j.enconman.2009.12.033

451. Gaur, M.K., Tiwari, G.N. Optimization of number of collectors for integrated PV/T hybrid active solar still (2010) Applied Energy, 87 (5), pp. 1763-1772. DOI: 10.1016/j.apenergy.2009.10.019

452. Chow, T.T. A review on photovoltaic/thermal hybrid solar technology (2010) Applied Energy, 87 (2), pp. 365-379. DOI: 10.1016/j.apenergy.2009.06.037

453. Tiwari, A., Barnwal, P., Sandhu, G.S., Sodha, M.S. Energy metrics analysis of hybrid - photovoltaic (PV) modules (2009) Applied Energy, 86 (12), pp. 2615-2625. DOI: 10.1016/j.apenergy.2009.04.020

454. Kumar, S., Tiwari, G.N. Life cycle cost analysis of single slope hybrid (PV/T) active solar still (2009) Applied Energy, 86 (10), pp. 1995-2004. DOI: 10.1016/j.apenergy.2009.03.005

455. Tiwari, A., Sandhu, G.S., Barnwal, P., Sodha, M.S. Energy and exergy metrics analyses of Hybrid Photovoltaic-Thermal air collector (2009) International Journal of Exergy, 6 (5), pp. 729-748. DOI: 10.1504/IJEX.2009.027499

456. Beccali, M., Finocchiaro, P., Nocke, B. Energy and economic assessment of desiccant cooling systems coupled with single glazed air and hybrid PV/thermal solar collectors for applications in hot and humid climate (2009) Solar Energy, 83 (10), pp. 1828-1846. DOI: 10.1016/j.solener.2009.06.015

457. Joshi, A.S., Dincer, I., Reddy, B.V. Performance analysis of photovoltaic systems: A review (2009) Renewable and Sustainable Energy Reviews, 13 (8), pp. 1884-1897. DOI: 10.1016/j.ijthermalsci.2008.05.001

458. Dubey, S., Solanki, S.C., Tiwari, A. Energy and exergy analysis of PV/T air collectors connected in series (2009) Energy and Buildings, 41 (8), pp. 863-870. DOI: 10.1016/j.enbuild.2009.03.010

459. Chow, T.T., Pei, G., Fong, K.F., Lin, Z., Chan, A.L.S., Ji, J. Energy and exergy analysis of photovoltaic-thermal collector with and without glass cover (2009) Applied Energy, 86 (3), pp. 310-316. DOI: 10.1016/j.apenergy.2008.04.016

460. Joshi, A.S., Tiwari, A., Tiwari, G.N., Dincer, I., Reddy, B.V. Performance evaluation of a hybrid photovoltaic thermal (PV/T) (glass-to-glass) system (2009) International Journal of Thermal Sciences, 48 (1), pp. 154-164. DOI: 10.1016/j.ijthermalsci.2008.05.001

461. Raman, V., Tiwari, G.N. A comparison study of energy and exergy performance of a hybrid photovoltaic double-pass and single-pass air collector (2009) International Journal Energy Research, 33 (6), pp. 605-617. DOI: 10.1002/er.1494

462. Liu, P., Guan, X., Cai, K., Mu, Z.J., Tong, T. Study on Photovoltaic Solar Cell Cooling System (2009) Progress in Enviromental Science and Technology, Vol. II, Pts A & B, pp. 166-170

42

463. Raman, V., Tiwari, G.N., Pandey, H.D. Life cycle cost analysis of a hybrid photovoltaic-thermal water and air collector: A comparison study based on energy and exergy (2008) International Journal of Low Carbon Technologies, 3 (3), pp. 173-190. DOI: 10.1093/ijlct/3.3.173

464. Pei, G., Zhou, T., Ji, J., He, W. Performance contrastive analysis of PV/T system with and without glaze conditions (2008) Taiyangneng Xuebao/Acta Energiae Solaris Sinica, 29 (11), pp. 1370-1374.

465. Dubey, S., Tiwari, G.N. Thermal modeling of a combined system of photovoltaic thermal (PV/T) solar water heater (2008) Solar Energy, 82 (7), pp. 602-612. DOI: 10.1016/j.solener.2008.02.005

466. Raman, V., Tiwari, G.N. Life cycle cost analysis of HPVT air collector under different Indian climatic conditions (2008) Energy Policy, 36 (2), pp. 603-611. DOI: 10.1016/j.enpol.2007.08.031

467. Joshi, A.S., Tiwari, A. Energy and exergy efficiencies of a hybrid photovoltaic-thermal (PV/T) air collector (2007) Renewable Energy, 32 (13), pp. 2223-2241. DOI: 10.1016/j.renene.2006.11.013

468. Ji, J., Lu, J.-P., Chow, T.-T., He, W., Pei, G. A sensitivity study of a hybrid photovoltaic/thermal water-heating system with natural circulation (2007) Applied Energy, 84 (2), pp. 222-237. DOI: 10.1016/j.apenergy.2006.04.009

469. Tiwari, A., Sodha, M.S. Parametric study of various configurations of hybrid PV/thermal air collector: Experimental validation of theoretical model (2007) Solar Energy Materials and Solar Cells, 91 (1), pp. 17-28. DOI: 10.1016/j.solmat.2006.06.061

470. Aroutiounian, V.M., Martirosyam, K.S., Hovhannisyan, A.S., Soukiassian, P.G. Double- And triple-layer antireflection coatings for silicon solar cells based on porous silicon (2006) Proceedings of SPIE - The International Society for Optical Engineering, 6327, Article Number 63270T. DOI: 10.1117/12.679923

471. Ji, J., Lu, J., He, W., Zhou, T., Pei, G. Experimental investigation on a novel solar photovoltaic/thermal system with flat aluminous box as collector (2006) Taiyangneng Xuebao/Acta Energiae Solaris Sinica, 27 (8), pp. 765-773.

472. Naveed, A.T., Kang, E.C., Lee, E.J. Effect of unglazed transpired collector on the performance of a polycrystalline silicon photovoltaic module (2006) Journal of Solar Energy Engineering, Transactions of the ASME, 128 (3), pp. 349-353. DOI: 10.1115/1.2212438

473. Lu, Z., Yao, Q. Flat-plate solar energy photovoltaic/thermal combined panel (2006) Taiyangneng Xuebao/Acta Energiae Solaris Sinica, 27 (6), pp. 545-553.

474. Tiwari, A., Sodha, M.S., Chandra, A., Joshi, J.C. Performance evaluation of photovoltaic thermal solar air collector for composite climate of India (2006) Solar Energy Materials and Solar Cells, 90 (2), pp. 175-189. DOI: 10.1016/j.solmat.2005.03.002

Citas B

[39] Chavez-Urbiola, EA., Vorobiev, YV., Bulat, LP. Solar hybrid systems with thermoelectric generators (2012) Solar Energy, 86, pp. 369-378. DOI: 10.1016/j.solener.2011.10.020

[40] Robles-Ocampo, B., Ruis-Vasquez, E., Canseco-Sanches, H., Cornejo-Meza, RC., Trapaga-Martínez, G., García-Rodríguez, FJ., González-Hernández, J., Vorobiev, YV. Photovoltaic/thermal solar hybrid system with bifacial PV module and transparent plane collector (2007) Solar Energy Materials and Solar Cells, 91, pp. 1966-1971.DOI: 10.1016/j.solmat.2007.08.005

[41] Zakharchenko, RV., Díaz-Flores, LL., Pérez-Robles, JF., González-Hernández, J., Vorobiev, YV. Nanostructured porous sol-gel materials for applications in solar cells engineering (2005) Physica Status Solidi C - Conferences and Critical Reviews, 2, pp. 3308-3313. DOI: 10.1002/pssc.200461151

27.- Preparation and Characterization of sol-gel Silica Based Neutral Optical Density Coatings by the Addition of Graphite Particles Author(s): J.L. Almaral-Sanchez, J. Alvarez-Quintana, C. Araujo-Andrade, J.A. Calderon-Guillen, H. Carrillo-Esquivel, E.A. Elizalde-Pena, N. Flores-Ramirez, F.A. Garcia-Pastor, O. Gomez-Guzman, L. Licea-Jimenez, D. Meneses-Rodrıguez, A.E. Pena-Hernandez, S.A. Perez-Garcia, J.C.Rubio-Avalos, A. Salazar-Flores, M. Talavera-Ortega, G. Vazquez-Garcia, L.D. Vazquez-Santoyo, J. Gonzalez-Hernandez Source: THIN SOLID FILMS Volume: 423 Pages: 196-200 Published: OCT 2002 CITAS A

43

475. Zhu, YL Comparison of tribological properties for graphite coatings used for remanufacturing (2005)

Journal of Central South University of Vechnology 12 (2) P.p. 41-44

Citas B

[42] Calderón-Guillén, J.A., Avilés-Arellano, L.M., Pérez-Robles, J.F., González-Hernández, J., Ramos-Ramírez, E. Dense silica-based coatings prepared from colloidal silica (2005) Surface and Coatings Technology, 190 (1), Pp. 110-114. DOI: 10.1016/j.surfcoat.2004.04.068

[43] Angelito-Baños, J., Avilés-Arellano, L.M.R., Barreiro-Rodríguez, G., Flores-Farías, R., Flores-Farías, S., Guerrero-Guerrero, N.A., Hernández-Landaverde, M.A., Hurtado-Macias, A., López-Beltrán, A.M., López-Gómez, M., Louvier-Hernández, J.F., Méndez-Albores, A., Ochoa-Landín, R., Rodríguez-Proenza, C.A., Vázquez-Durán, A.G., Véles-Medina, J.J., González-Hernández, J. Structural characterization of silver doped silica prepared by two different wet chemical methods (2004) Journal of Sol-Gel Science and Technology, 30 (2), pp. 89-94. DOI: 10.1023/B:JSST.0000034696.92285.72

ANEXO VIII

Arbitraje de proyectos científicos o tecnológicos

1. ARTICULO: Ms. Ref. No.: CARBON-D-18-01770 Title: Enhanced adsorption of organic dyes by graphene: A new insight into their interactions CARBON Dear Alfonso, Thank you for your review of this manuscript. You may access your review comments and the decisi

2. ARTICULO: Dear Dr. Pérez-García, Thank you for submitting your review report on Research Article 6846753 titled "Synthesis and Characterization of Self-Assembled, Free Standing, Flexible Graphene Oxide Sheet for Supercapacitor Applications" by Nagarani Sandhar

3. ARTICULO: Ref.: Ms. No. APYA-D-18-00008 A 3D heterogeneous FeTiO3/TiO2@C fiber membrane as a self-standing anode for high performance Li-ion battery Applied Physics A Dear Dr. Perez Garcia, Thank you for your review of this manuscript. You can access yo

4. ARTICULO: Ref: MATERIALSCHAR_2017_2597 Title: Direct observation of interfacial reaction of Ni/6H-SiC and carbon redistribution by in situ transmission electron microscopy Journal: Materials Characterization

5. ARTICULO: Ref.: Ms. No. APYA-D-17-01005R1 Enhanced photoconductance in ZnS-RGO based nanocomposite under UV irradiation Applied Physics A

6. ARTICULO: Ref.: Ms. No. APYA-D-17-00889 Tailor made exfoliated reduced graphene oxide nanosheets based on oxidative-exfoliation approach Applied Physics A Dear Dr. Perez Garcia, Thank you for your review of this manuscript. You can access your review co

7. ARTICULO: Ref.: Ms. No. APYA-D-17-01314 Ag/nano-TiO2 composites compact film for enhanced performance of perovskite solar cell based on carbon counter electrodes Applied Physics A Dear Dr. Perez Garcia, Thank you for your review of this manuscript. You

8. ARTICULO: Ref.: Ms. No. APYA-D-17-01314R1 Ag/nano-TiO2 composites compact film for enhanced performance of perovskite solar cell based on carbon counter electrodes Applied Physics A Dear Dr. Perez Garcia, Thank you for your review of this manuscript. Yo

44

9. ARTICULO: Dear Dr Pérez-García, Re: "Effect of reduced graphene oxide on the energy harvesting performance of P(VDF-TrFE)-BaTiO3 nanocomposite devices" by Yaqoob, Usman; Chung, Gwiy-Sang Article reference: SMS-105061 Thank you for your report on

10. ARTICULO: Ms. Ref. No.: APSUSC-D-16-10651 Title: (001) 3C SiC/Ni contact interface: In situ XPS observation of annealing induced Ni2Si formation and the resulting barrier height changes Applied Surface Science

11. ARTICULO: Ms. Ref. No.: SE-D-16-00335 Title: A fast and facile fabrication of chemically-converted graphene oxide thin films and their uses as absorber materials for solar cells Solar Energy

12. ARTICULO: Ms. Ref. No.: MSSP-D-15-00984R1 Title: Evaporated Iron Disulfide Thin Films, Sulfurated Annealing Treatments Materials Science in Semiconductor Processing Dear Alfonso, Thank you for taking the time to review the above-referenced manuscript. You

13. ARTICULO: Ms. Ref. No.: MSSP-D-15-00987 Title: ZnIn2S4: Synthesis, characterization, and its light harvesting applications through semi-batch method Materials Science in Semiconductor Processing Dear Alfonso, Thank you for taking the time to review the abo

14. ARTICULO: Ms. Ref. No.: CARBON-D-15-01375 Title: Graphite Mediated Reduction of Graphene Oxide Monolayer Sheets CARBON Dear Alfonso, Thank you for your review of this manuscript. You may access your review comments and the decision letter (when availabl

15. ARTICULO: Evaluation of an Induction Assisted Friction Stir Welding technique for Super Duplex Stainless Steels

16. ARTICULO: Manuscript # SIA-13-0291 entitled "Evaluation of an Induction Assisted Friction Stir Welding technique for Super Duplex Stainless Steels" has been submitted to Surface and Interface Analysis for the Special Issue dedicated to ECASIA'13.

17. ARTICULO: Effects of potassium doping on the composition, structure and carbon dioxide chemisorption of Na2ZrO3

18. ARTICULO: Kinetic Study of Interfacial Solid State Reactions in the Ni/4H-SiC Contact

1. PROYECTO: RENOVACION Y ACTUALIZACION DE LA INFRAESTRUCTURA EXPERIMENTAL PARA ESTUDIOS FISICOQUIMICOS DE SISTEMAS BIOLOGICOS

2. PROYECTO: PRODUCCION DE NANOCOMPUESTOS POLIMERICOS POR MEDIO DE EXTRUSION Y CABEZAL CON ULTRASONIDO

3. PROYECTO: Laboratorio de caracterización estructural para investigación y servicios tecnológicos

4. PROYECTO: CARACTERIZACIÓN DE MATERIALES MEDIANTE RESONANCIA MAGNÉTICA NUCLEAR EN ESTADO SÓLIDO

5. PROYECTO: RENOVACION Y ADQUISICION DE EQUIPO CIENTIFICO PARA EL FORTALECIMIENTO DE LABORATORIOS DEL CENTRO DE INNOVACION Y DESARROLLO TECNOLOGICO EN SOLDADURA

6. PROYECTO: ESTUDIO DE LAS PROPIEDADES FISICAS Y ESTRUCTURALES DE MATERIALES OXIDOS Y SUS INTERFASES

7. PROYECTO: Desarrollo y aplicación de nanoestructuras superparamagnéticas y fotoactivables como agentes nanoteranósticos ultra sensibles y específicos del cáncer

45

8. PROYECTO: Correlación de la estructura física y química de nanopelículas con sus propiedades funcionales

9. PROYECTO: ESTUDIO DE LOS FENOMENOS DE OXIDACION ISOTERMICA, CICLICA Y DE DESGASTE EN MATERIALES METALICOS Y CERAMICOS AVANZADO

10. PROYECTO: Análisis de los mecanismos de reacción en la reducción aluminotérmica de residuos sólidos a base de ZnO y Mn2O3

11. PROYECTO: “PREPARACIÓN DE NANOESTRUCTURAS MULTIFUNCIONALES PARA LA CUANTIFICACIÓN Y REMOCIÓN DE ESPECIES BIOLÓGICAS Y AMBIENTALES�?

12. PROYECTO: DESARROLLO DE NUEVO PAPEL KRAFT RECICLADO NANOREFORZADO CON BIOPOL�?MEROS PARA SOLUCIONES DE EMPAQUE DE ALTO RENDIMIENTO (SUPERKRAFT)"

13. PROYECTO: S�?NTESIS QU�?MICA DE PEL�?CULAS DELGADAS DE ÓXIDOS SEMICONDUCTORES (ZnO, SnO2 y TiO2): CARACTERIZACIÓN INTEGRAL Y OPTIMIZACIÓN DE SUS PROPIEDADES PARA SER APLICADAS COMO ELECTRODOS TRANSPARENTES, SENSORES DE GASES Y DEGRADANTES FOTOCATAL�?TICOS.

14. PROYECTO: CONSTRUCCIÓN DE UN INSTRUMENTO COMBINADO Y ESTUDIO DE LOS MÉTODOS SIMS/EDX COMO COMPLEMENTO PARA ANALISIS QU�?MICO CUANTITATIVO DE DIVERSOS MATERIALES SÓLIDOS Y PELICULAS DELGADAS

15. PROYECTO: Development of Flexible Thin Film Sensors for Charged Particle and Neutron Detectors

16. PROYECTO: Establecimiento de un Laboratorio de Bioingenieria de Superficies

17. PROYECTO: " 000000000242495 " con el titulo " Desarrollo de películas delgadas de CdMgTe por la técnica de coevaporación para aplicación en celda solar superior "

ANEXO IX Pertenencia al Sistema Nacional de Investigadores

Perteneciente al SNI Nivel I desde 1996-2018 SNI Nivel II desde enero de 2019

46

ANEXO X

Registro y Títulos de Patentes

1.-Titulo: "Método para conservación y secado de alimentos con alto contenido de azúcares" Autores: María Zenaida Saavedra Leos, Alicia Grajales Lagunes, Miguel Ángel Ruiz Cabrera, Alberto Toxqui Terán, Sergio Alfonso Pérez García Expediente: MX/a/2010/007940 Titulo de Patente: 355205 Fecha de Registro:21/07/2010, Fecha de Título de Patente: 223/02/2018 Condición actual: OTORGADA 2.- Titulo: "Método de reducción parcial de óxido de grafeno mediante reductores suaves a temperatura ambiente" Autores: Miguel Ángel Velasco Soto; Sergio Alfonso Pérez García; Liliana Licea Jiménez; Alberto Toxqui Terán Expediente: MX/a/2016/007399 Fecha de Registro: 07/06/2016 3.- Titulo: "Método de preparación de recubrimientos hidrofóbicos basados en nanocompositos multicapas" Autores: Margarita Sánchez Domínguez, Liliana Licea Jiménez, Sergio Alfonso Pérez García, Alberto Toxqui Terán, Daniel Antuhan Hernández Lepe, Flavio Gabino Flores Banda, Arturo Román Vázquez Velázquez, Miguel Ángel Velasco Soto Expediente: MX/a/2016/008071 Fecha de Registro: 17/06/2016 4.- Titulo: "Método de preparación de recubrimientos superhidrofílicos basados en nanocompositos" Autores: Liliana Licea Jiménez; Arturo Román Vázquez Velázquez; Sergio Alfonso Pérez García; Miguel Ángel Velasco Soto; Margarita Sánchez Domínguez; Alberto Toxqui Terán Expediente: MX/a/2016/014953 Fecha de Registro: 15/11/2016 5.- Titulo: "Método para obtención de óxido de grafeno reducido con tamaño, solubilidad y propiedad semiconductora controlables" Autores: Liliana Licea Jiménez; Sergio Alfonso Pérez García; Ulises Antonio Méndez Romero; Miguel Ángel Velasco Soto; Alberto Toxqui Terán Expediente: MX/a/2017/010798 Fecha de Registro: 11/08/2017 6.- Titulo: "Método para obtención de óxido de grafeno reducido y covalentemente funcionalizado con aminas" Autores: Liliana Licea Jiménez; Sergio Alfonso Pérez García; Ulises Antonio Méndez Romero; Miguel Ángel Velasco Soto; Alberto Toxqui Terán Expediente: MX/a/2017/016741 Fecha de Registro: 19/12/2017 7.- Titulo: "Método de preparación de recubrimientos hidrofóbicos y bloqueadores de ultravioleta basados en nanocompositos de matriz de poliuretano con alumina y ceria funcionalizada" Autores: Liliana Licea Jiménez; Arturo Román Vázquez Velázquez; Sergio Alfonso Pérez García; Miguel Ángel Velasco Soto; Alberto Toxqui Terán Expediente: MX/a/2018/007168 Fecha de Registro: 13/06/2018 8.- Titulo: "Dispositivo y método para aplicar recubrimientos nanocompositos por rocío con inyección de flujo, ajustable en base a una mesa de coordenadas" Autores: Sergio Alfonso Pérez García; Pavel Vorobiev; Liliana Licea Jiménez; Arturo Román Vázquez Velázquez; Miguel Ángel Velasco Soto y Alberto Toxqui Terán Expediente: MX/a/2018/016169 Fecha de Registro: 19/12/2018 Condición actual: Registrada

47

ANEXO XI Cursos

Curso

Período

Programa

Introducción a la Ciencia de Materiales Ciclo 2009-2 Maestría en Ciencia de Materiales

Caracterización de Materiales Ciclo 2010-1 Maestría en Ciencia de Materiales

Temas Selectos de Nanotecnología Ciclo 2010-1 Maestría en Ciencia de Materiales

Introducción a la Ciencia de Materiales Ciclo 2010-2 Maestría en Ciencia de Materiales


Temas Selectos de Nanotecnología Ciclo 2011-1 Maestría en Ciencia de Materiales

Introducción a la Nanotecnología Ciclo 2011-1 Maestría en Ciencia de Materiales

Temas Selectos de Física y Química Ciclo 2011-2 Maestría en Ciencia de Materiales

Preparación y Caracterización de Películas Delgadas Ciclo 2011-2 Maestría en Ciencia de Materiales


Introducción a la Ciencia de Materiales 2012 Maestría en Nanotecnología

Introducción a la Nanotecnología 2012 Maestría en Nanotecnología

Aplicaciones Industriales de la Nanotecnología 2012 Maestría en Nanotecnología




Introducción a la Nanotecnología Ciclo 2016-1 Maestría en Ciencia de Materiales

Temas Selectos de Ingeniería y Procesos de

Manufactura

Ciclo 2016-2 Maestría en Ciencia de Materiales

Caracterización de Materiales I Ciclo 2017-2 Maestría en Ciencia de Materiales

Tópicos Selectos de Nanotecnología Ciclo 2017-2 Maestría en Nanotecnología

Química de Materiales Ciclo 2017-2 Maestría en Ciencia de Materiales

Introducción a la nanotecnología Ciclo 2018-1 Maestría en Ciencia de Materiales




48

ANEXO XII

Dirección de Tesis Terminadas y en Proceso externas e Internas

SUPERVISIONES DE TESIS

En Proceso (Copia desde Sistema de Posgrado)

Finalizadas Externos

I. Gildas Nédellec, “Processing and Characterisation of In-Situ Nickel Silicide Formation on Silicon carbide”, Department of Materials Science and Engineering, Chalmers University of Technology, Göteborg, Sweden, (2004). (Licenciatura)

II. Raquel de Oro Calderón. “Surface oxides in chromium-alloyed steel powder”. Department of

Materials Science and Engineering, Chalmers university of Technology, Göteborg, Sweden (2007). (Maestría)

III. Laure Zegdoun, “A new samples design for cyclic high temperature corrosion and condensation in

crevices”, Department of Materials Science and Engineering, Chalmers University of Technology, Göteborg, Sweden, (2007). (Licenciatura)

IV. Marisol Rodríguez Comunidad, “Preparación y caracterización de películas delgadas de

ZnO/PEDOT:PSS para su aplicación en celdas dolares polímerica” Universidad Autónoma de Zacatecas, (2010) (Licenciatura)

V. Hugo Alberto Navarro Ruíz “ Estudio de las propiedades tribológicas de Materiales Compuestos

del tipo Nanopartícula/Polímero fotocurable” Universidad de Monterrey (2011) (Licenciatura)

VI. Rodolfo Reynaldo Jaime Ugarte, “ Estudio de las propiedades tribológicas de Materiales Compuestos del tipo Nanopartícula/Polímero fotocurable” Universidad de Monterrey (2011) (Licenciatura)

VII. María Zenaida Saavedra Leos, “Estudio de la transición vítrea de sistemas modelo elaborados con

fructosa, glucosa y sacarosa para la optimización del secado por aspersión y estabilidad de jugos de frutas en polvo”, Facultad de Ciencias Químicas, Universidad Autónoma de San Luis Potosí. Diciembre 2011. (Doctorado)

VIII. Alejándra Ramírez González, “Contribución al Estudio de la Transición Vitrea y Diagramas de

Estado en Biomateriales Agua-Carbohidratos”, Facultad de Ciencias Químicas, Universidad Autónoma de San Luis Potosí. Diciembre 2014. (Maestría)

49

Finalizadas Internas (Copia desde Sistema de Posgrado)

ANEXO XIII Participación como sinodal en examenes de grado

50

51

ANEXO XIV Participación en Proyectos de Vinculación

VINCULACIÓN CON LA INDUSTRIA *SE MARCAN EN AMARILLO EN LAS QUE SE ES LIDER/RESPONSABLE

1. Asesoría sobre Cables deslizables tipo THHN (Conductores Monterrey Viakable – Dr. Gregorio Vargas 2008) (Colaborador) Monto: $ 60,000.00

2. Uso de nanopartículas en la fabricación de espumas de poliestireno extruído (Owens Corning- Dr. José Bonilla Cruz 2009-2010) (Colaborador) Monto: $ 2,500,000.00

3. Vidrio plano con control solar y color (VITRO- Dr. Mario Miki) (Colaborador)

4. Investigación para la separación de la mezcla PET/PVC (Grupo Simplex-2009 Dra. Liliana Licea Jiménez) (Colaborador ) Monto: $ 1,001,397.00

5. Innovación y desarrollo tecnológico de instrumental médico y quirúrgico: caracterización de materiales y desarrollo de proceso (GOVAL-2009 Dr. Servando Aguirre Tostado) (Colaborador ) Monto: $ 1,081,131.99

6. Modificación en la línea de Botanas (CONAGRA FOODS-2010) Monto: $ 4,481,000.00 (Líder )

7. Diplomado de Nanotecnología al Cluster de Nano Nuevo León (Dr. José Bonilla Cruz - 2011) (Colaborador ) Monto: $241,379.00

8. Desarrollo de nuevos productos y empaques en las líneas de palomitas, salsas, enlatados y aceites (CONAGRA FOODS-2011) Monto: $ 570,890.00 (Líder )

9. Desarrollo de una formulación a nivel laboratorio de un acondicionador textil con propiedades antiarrugas (ALEN-2011) Monto: $ 2,180,000.00 (Líder )

10. Módulos El Mundo de los Materiales, I2T2, Nuevo León (I2T2-2012 Dr. Paul Horley) (Colaborador ) Monto: $ 500,000.00

11. Desarrollo de corazones ultradelgados para componentes automotrices de alto desempeño energético y mecánico-estructural utilizando materiales nano estructurados (Nemak-2012 Dra. Tania Ernestina Lara Ceniceros) (Colaborador ) Monto: $ 2,229,463.40

12. Desarrollo y evaluación de nuevas aplicaciones de cargas funcionales en forma de microesfera y desarrollo de planta piloto para la obtención de cargas funcionales en forma de “laminillas micronizadas” para su aplicación en recubrimientos (Termolita-2012 Dr. Jaime Alvarez Quintana) (Colaborador ) Monto: $ 562,061.39

13. Desarrollo de un prototipo tipo “vending machine” el cual surtirá producto explotado con el sabor deseado (CONAGRA FOODS-2012) Monto: $ 5,289,178.30 (Líder )

14. Generación de espuma de PU de baja densidad con propiedades mecánicas reforzadas (QUÍMICA PUMEX-2013) Monto: $2,803,215.85 (Lider)

15. desarrollo de corazones ultradelgados para componentes automotrices de alto desempeño energético y mecánico-estructural utilizando materiales nano estructurados (NEMAK -2013) (Colaborador) Monto: $2,229,000.00

16. Desarrollo de productos para las nuevas lineas estratégicas de negocio mediante innovación radical (CONAGRA FOODS-2013) Monto: $2,200,000.00 (Lider)

17. Desarrollo de plataforma tecnológico para el diseño de recubrimientos arquitectónicos mediante la incorporación de nanopartículas de Si y otras partículas especiales (COMEX-2013) (Colaborador) Monto: $660,000.00

18. Evaluación del desempeño de recubrimientos reflejantes emisivos para techos de viviendas (COMEX-2013) (Colaborador) Monto: $719,310.35

52

19. Desarrollo de productos, procesos y empaques para las líneas estratégicas de negocios mediante innovación radical (CONAGRA FOODS-2014) Monto: $2,540,216.80 (Lider)


21. Desarrollo del dispositivo de caracterización de propiedades del núcleo de acero al silicio de un transformador y la cuantificación de la contribución del sistema de sujeción del núcleo al nivel de pérdidas de eficiencia (PROLEC-2015) (Colaborador) Monto: $1,423,594.80

22. Poliuretano nanotecnológico resistente al fuego libre de halógenos para aplicaciones estratégicas. (QUÍMICA PUMEX-2015) Monto: $2,238,199.69 (Lider)


24. Desarrollo de un convertidor termoeléctrico para la recuperación y reciclado de energía térmica en sistemas de refrigeración (IMBERA-2016) (Colaborador) Monto: $2,191,611.47

25. Mejora de pasta de oxido de plomo y su desempeño con respecto a la variación de tamaño de las partículas de piso para su aplicación como material activo de acumuladores eléctricos (ENERYA GPO GOHNER-2016) Monto: $2,100,077.59 (Lider)

26. Innovación en Fórmulas y Empaques para las Plataformas de Botanas y Envasados con Impacto en la Sustentabilidad Ambiental (CONAGRA FOODS-2016) Monto: $1,753,130.87 (Lider)

27. Evaluación del desempeño de recubrimientos reflejantes emisivos para techos de viviendas (COMEX-2016) (Colaborador) Monto: $1,551,724.13

28. Innovación en empaques poliméricos y estudio térmico in-situ de bolsa transparente de palomitas (CONAGRA FOODS-2017) Monto: $1,416,380.92 (Lider)

29. Propuesta de proyectos de innovación en el área de implementación y desarrollo de productos. (Estudios exploratorios: Análisis Térmico) (QUÍMICA PUMEX-2017) Monto: $250,000.00 (Lider)

30. Estudio de PU's espreados de más de 1" y su estabilidad dimensional (QUÍMICA PUMEX-2018) Monto: $300,000.00 (Lider)

Documents

Formato detallado para Investigador INVESTIGACIÓN Información …productividad.cimav.edu.mx/productividad/adjuntos... · 2019-01-30 · automotriz (VITRO-2014) (Colaborador) Monto: