PROCESS WEIGHING Applications

• Inventory Measurement • Level Measurement• Batching/Blending• Filling/Dispensing/Dosing

Features

THE HARDY PROCESS TOOLBOXThe Hardy Process Toolbox is a set of productivity tools that delivers value across process weighing functions. Each tool saves time, increases accuracy, improves efficiency or reduces risk in your process weighing applications.

Electronic calibration without test weights

Weighing system monitoring, diagnostics and troubleshooting

IP66 Instrument Display Rating

Nema 4X & Watershed Enclosure Options

Turnkey, Pre-assembled

www.hardysolutions.com • 800-821-5831

Integrated Panel Systems For the HI 4050, HI 6500 and HI 6600 Series

IT INTEGRATED TECHNICIAN

IT

PRODUCTIVITY

PROCESS TOOLBOXTM

TM

®

Optional Components Include:• 22mm metal pushbuttons and associated

indelible marking. Available buttons are currently Blue (reset), Black (zero) and White (tare) and are located at the bottom half of the enclosure door

• N-position selector switch and associated indelible marking to indicate modes of operation for Gross or Net located in the enclosure door

• 3-mode tower light wired to the instrument located on the top of the enclosure

• Opto22 relay backplane to accommodate a large variety of relay choices in AC, DC, low and high current, mechanical and solid state

EASY INSTALLATIONJust hang the Integrated Panel System on the wall, connect your load cells to the built in summing card through the cable glands and you are ready to calibrate!

SIMPLE SET-UP & CALIBRATIONThe embedded webserver in the instrument enables access to setup and calibration from anywhere on your network. Use Hardy's exclusive C2® for automatic system calibration to save hours in commissioning and routine maintenance.

QUICK MAINTENCE & DIAGNOSTICS Use INTEGRATED TECHNICIAN® to maintain and troubleshoot the weighing system from anywhere in the world or use Hardy’s intuitive local display.

Save Time and Money with a type 4 or 4X Integrated Panel System

REDUCE THE TIME TO DESIGN, DEVELOP AND DEPLOYHardy Process Solutions provides Integrated Panel Systems for turnkey delivery of process weighing equipment in a variety of enclosures including stainless and powder-coated steel, in rectangular, watershed and hygienic designs. Integrated Panel Systems ease ordering and save time in configuration and installation, enabling Hardy customers to get up and running faster with just one supplier. Delivered ready to install, panels come in a type 4 or 4X rated enclosure with pre-wired instrumentation, accessories and peripherals, and pre-cut gland holes and a wireway for a complete, clean and organized weighing system.

Integrated Panel Designs Include:• Installation of Hardy HI 4050, HI 6500, HI

6500-XP, or HI 6600 series instruments configured with any number of options, mounted on DIN Rail in a hinged type 4 or 4X enclosure with the associated pass through glands for power, communications, up to four sensors and up to three output cables.

• Installation of an optional display panel mounted in the center of the upper half of the enclosure door allows an area for buttons and switches to be located in the lower half of the door.

• Installation of an optional Hardy HI6020 IT summing card with connectors mounted in the back of the enclosure.

• Nine standard enclosure options are available in a variety of materials, shapes and sizes, Other sizes and types are available by request.

www.hardysolutions.com • 800.821.5831

9440 Carroll Park Dr.San Diego, CA 92121tel. +1-858-278-2900

tel. 800-821-5831fax +1-858-278-6700

www.hardysolutions.comhardyinfo@hardysolutions.com

Since 1993

Custom Panel 06/16 0400-CP Rev. A

All information within is subject to change without notice. Visit our website for latest specifications. WAVERSAVER, C2, IT, ADVANTAGE and ANY-WEIGH are registered trademarks of Hardy Process Solutions, Inc. All other trademarks or registered trademarks are the property of their respective owners.

Weighing Instruments Dedicated to Your ApplicationsControllers, Weigh Modules, Weight Processors & Transmitters

ADVANTAGE Series with C2 Calibration

COMPONENTS TO COMPLETE YOUR HARDY SYSTEM

MAKE

STOCK

PACK

SHIP

Hardy Bench Scales, Floor Scales and Load PointsHardy carries a wide variety of strain gauge load points and scale bases to accommodate your application requirements.

HI 3000 & HI 4000 Controllers and

HI 6X00 Series Weight Processors

Configuration Options

Allen-Bradley® Compatible Plug-in Weigh Scale Modules

Custom Panel Enclosure Options

• 12"h x 10"w x 6"d Carbon Steel (Powder Coated) Nema4X Enclosure w/hinge and 1/4 turn un-keyed latch • 12"h x 10"w x 8"d Carbon Steel (Powder Coated) Nema4X Enclosure w/hinge and 1/4 turn un-keyed latch • 16"h x 14"w x 8"d Carbon Steel (Powder Coated) Nema4X Enclosure w/hinge and 1/4 turn un-keyed latch • 12"h x 10"w x 6"d Stainless Steel Nema4X Enclosure w/hinge and 1/4 turn un-keyed latch • 12"h x 10"w x 8"d Stainless Steel Nema4X Enclosure w/hinge and 1/4 turn un-keyed latch • 16"h x 14"w x 8"d Stainless Steel Nema4X Enclosure w/hinge and 1/4 turn un-keyed latch • Water Shed 12"h x 10"w x 6"d Stainless Steel Nema4X Enclosure w/hinge and 1/4 turn un-keyed latch • Water Shed 12"h x 10"w x 6"d Stainless Steel Nema4X Enclosure w/hinge and 1/4 turn un-keyed latch • Water Shed 12"h x 10"w x 6"d Stainless Steel Nema4X Enclosure w/hinge and 1/4 turn un-keyed latch• Other sizes and types are available on request

Instrument Options:• HI 4050 with options for front display panel, communications and power• HI 6500-WP-00-EIP without disply panel • HI 6500-WP-10-EIP with display panel • HI 6500-XP-00-EIP without display panel • HI 6500-XP-10-EIP with display panel • HI6600-EIP requires 1 or more HI 66110-WP• HI6610-WP• Multiple instrument installations are available upon request

Front Display Panel (per Instrument Options)• Display bezel mounted on front enclosure rated to a type 4 or 4X when panel is mounted in a type 4 or 4X enclosure

Summing Card Options• No junction card• Integrated Technician junction card• Integrated Technician junction card with trim pots (use with non-C2 load cells)• Junction card• Junction card with trim pots (use with non-C2 load cells)

Hardy Floor Scales