Accumulator tank ensures a smooth even flow of water to all outlets • Compact design installs easily in convenient locations. • Reduced noise and vibration by preventing pump cycling. • Connects directly to Whale Quick Connect 15mm plumbing system or barbed connection provided for flexible hosing. • Can be fitted to new or existing systems. • Ideal for use with Whale Universal and Watermaster Pressure Pumps. 2 Litre (0.53 US Gals) Accumulator Tank Ref: db_pshaw_accumulator_v2_0619 For further information: [email protected] or www.whalepumps.com ©Copyright Whale 2019 - All rights reserved. Reproduction in whole or in part without permission is prohibited. WHALE ® , is a registered trademark of Munster Simms Engineering Limited, Bangor, Northern Ireland trading as Whale. Whale’s policy is one of continuous improvement and we reserve the right to change specifications without prior notice. Illustrations are for guidance purposes only. Neither the accuracy nor completeness of the information contained in this or any product literature is guaranteed by the Company and may be subject to change at its sole discretion. Product Code PT0200 Accumulator Tank Size 2 ltrs (0.53 US Gals) Allowable Maximum Pressure 8 bar (116 psi) Factory Pre-charge Pressure 1.5 bar (22 psi) Weight 1.22 kg (2.7 lbs) Inlet and Outlet Size Whale ® Quick Connect Materials in Contact Polyethylene, with Liquid Stainless Steel, Butyl For Smooth Constant Water Flow - Prevents water hammering and cycling 145mm (5 11/16”) 142mm (5 9/16”) 258mm (10 3/16”) Typical Installation Please note: PT0200 must be located no more than 0.5m (1.7ft) way from the pressure pump.

For Smooth Constant Water Flow - Prevents water hammering ... · For Smooth Constant Water Flow - Prevents water hammering and cycling 145mm (5 11/16”) 142mm (5 9/16”) 258mm (10

Download PDF Report

Upload
others
View
6
Download
0

Embed Size (px)

Citation preview

Page 1: For Smooth Constant Water Flow - Prevents water hammering ... · For Smooth Constant Water Flow - Prevents water hammering and cycling 145mm (5 11/16”) 142mm (5 9/16”) 258mm (10

Accumulator tank ensures a smooth even fl ow of water to all outlets

• Compact design installs easily in convenient locations.

• Reduced noise and vibration by preventing pump cycling.

• Connects directly to Whale Quick Connect 15mm plumbing system or barbed connection provided for fl exible hosing.

• Can be fi tted to new or existing systems.

• Ideal for use with Whale Universal and Watermaster Pressure Pumps.

2 Litre (0.53 US Gals)Accumulator Tank

Ref

: db

_psh

aw_a

ccum

ulat

or_v

2_06

For further information: [email protected] or www.whalepumps.com

©Copyright Whale 2019 - All rights reserved. Reproduction in whole or in part without permission is prohibited. WHALE®, is a registered trademark of Munster Simms Engineering Limited, Bangor, Northern Ireland trading as Whale.

Whale’s policy is one of continuous improvement and we reserve the right to change specifi cations without prior notice. Illustrations are for guidance purposes only.Neither the accuracy nor completeness of the information contained in this or any product literature is guaranteed by the Company and may be subject to change at its sole discretion.

Product Code PT0200

Accumulator Tank Size 2 ltrs (0.53 US Gals)

Allowable Maximum Pressure 8 bar (116 psi)

Factory Pre-charge Pressure 1.5 bar (22 psi)

Weight 1.22 kg (2.7 lbs)

Inlet and Outlet Size Whale® Quick Connect

Materials in Contact Polyethylene, with Liquid Stainless Steel, Butyl

For Smooth Constant Water Flow - Prevents water hammering and cycling

145m

m (5

11/

16”)